drivers/usb/dwc2/hcd.h

   1 /*
   2  * hcd.h - DesignWare HS OTG Controller host-mode declarations
   3  *
   4  * Copyright (C) 2004-2013 Synopsys, Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions, and the following disclaimer,
  11  *    without modification.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  * 3. The names of the above-listed copyright holders may not be used
  16  *    to endorse or promote products derived from this software without
  17  *    specific prior written permission.
  18  *
  19  * ALTERNATIVELY, this software may be distributed under the terms of the
  20  * GNU General Public License ("GPL") as published by the Free Software
  21  * Foundation; either version 2 of the License, or (at your option) any
  22  * later version.
  23  *
  24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
  25  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  26  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  27  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  28  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  29  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  30  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  31  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  32  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  33  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  34  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  35  */
  36 #ifndef __DWC2_HCD_H__
  37 #define __DWC2_HCD_H__
  38
  39 /*
  40  * This file contains the structures, constants, and interfaces for the
  41  * Host Contoller Driver (HCD)
  42  *
  43  * The Host Controller Driver (HCD) is responsible for translating requests
  44  * from the USB Driver into the appropriate actions on the DWC_otg controller.
  45  * It isolates the USBD from the specifics of the controller by providing an
  46  * API to the USBD.
  47  */
  48
  49 struct dwc2_qh;
  50
  51 /**
  52  * struct dwc2_host_chan - Software host channel descriptor
  53  *
  54  * @hc_num:             Host channel number, used for register address lookup
  55  * @dev_addr:           Address of the device
  56  * @ep_num:             Endpoint of the device
  57  * @ep_is_in:           Endpoint direction
  58  * @speed:              Device speed. One of the following values:
  59  *                       - USB_SPEED_LOW
  60  *                       - USB_SPEED_FULL
  61  *                       - USB_SPEED_HIGH
  62  * @ep_type:            Endpoint type. One of the following values:
  63  *                       - USB_ENDPOINT_XFER_CONTROL: 0
  64  *                       - USB_ENDPOINT_XFER_ISOC:    1
  65  *                       - USB_ENDPOINT_XFER_BULK:    2
  66  *                       - USB_ENDPOINT_XFER_INTR:    3
  67  * @max_packet:         Max packet size in bytes
  68  * @data_pid_start:     PID for initial transaction.
  69  *                       0: DATA0
  70  *                       1: DATA2
  71  *                       2: DATA1
  72  *                       3: MDATA (non-Control EP),
  73  *                          SETUP (Control EP)
  74  * @multi_count:        Number of additional periodic transactions per
  75  *                      (micro)frame
  76  * @xfer_buf:           Pointer to current transfer buffer position
  77  * @xfer_dma:           DMA address of xfer_buf
  78  * @align_buf:          In Buffer DMA mode this will be used if xfer_buf is not
  79  *                      DWORD aligned
  80  * @xfer_len:           Total number of bytes to transfer
  81  * @xfer_count:         Number of bytes transferred so far
  82  * @start_pkt_count:    Packet count at start of transfer
  83  * @xfer_started:       True if the transfer has been started
  84  * @ping:               True if a PING request should be issued on this channel
  85  * @error_state:        True if the error count for this transaction is non-zero
  86  * @halt_on_queue:      True if this channel should be halted the next time a
  87  *                      request is queued for the channel. This is necessary in
  88  *                      slave mode if no request queue space is available when
  89  *                      an attempt is made to halt the channel.
  90  * @halt_pending:       True if the host channel has been halted, but the core
  91  *                      is not finished flushing queued requests
  92  * @do_split:           Enable split for the channel
  93  * @complete_split:     Enable complete split
  94  * @hub_addr:           Address of high speed hub for the split
  95  * @hub_port:           Port of the low/full speed device for the split
  96  * @xact_pos:           Split transaction position. One of the following values:
  97  *                       - DWC2_HCSPLT_XACTPOS_MID
  98  *                       - DWC2_HCSPLT_XACTPOS_BEGIN
  99  *                       - DWC2_HCSPLT_XACTPOS_END
 100  *                       - DWC2_HCSPLT_XACTPOS_ALL
 101  * @requests:           Number of requests issued for this channel since it was
 102  *                      assigned to the current transfer (not counting PINGs)
 103  * @schinfo:            Scheduling micro-frame bitmap
 104  * @ntd:                Number of transfer descriptors for the transfer
 105  * @halt_status:        Reason for halting the host channel
 106  * @hcint               Contents of the HCINT register when the interrupt came
 107  * @qh:                 QH for the transfer being processed by this channel
 108  * @hc_list_entry:      For linking to list of host channels
 109  * @desc_list_addr:     Current QH's descriptor list DMA address
 110  *
 111  * This structure represents the state of a single host channel when acting in
 112  * host mode. It contains the data items needed to transfer packets to an
 113  * endpoint via a host channel.
 114  */
 115 struct dwc2_host_chan {
 116         u8 hc_num;
 117
 118         unsigned dev_addr:7;
 119         unsigned ep_num:4;
 120         unsigned ep_is_in:1;
 121         unsigned speed:4;
 122         unsigned ep_type:2;
 123         unsigned max_packet:11;
 124         unsigned data_pid_start:2;
 125 #define DWC2_HC_PID_DATA0       TSIZ_SC_MC_PID_DATA0
 126 #define DWC2_HC_PID_DATA2       TSIZ_SC_MC_PID_DATA2
 127 #define DWC2_HC_PID_DATA1       TSIZ_SC_MC_PID_DATA1
 128 #define DWC2_HC_PID_MDATA       TSIZ_SC_MC_PID_MDATA
 129 #define DWC2_HC_PID_SETUP       TSIZ_SC_MC_PID_SETUP
 130
 131         unsigned multi_count:2;
 132
 133         u8 *xfer_buf;
 134         dma_addr_t xfer_dma;
 135         dma_addr_t align_buf;
 136         u32 xfer_len;
 137         u32 xfer_count;
 138         u16 start_pkt_count;
 139         u8 xfer_started;
 140         u8 do_ping;
 141         u8 error_state;
 142         u8 halt_on_queue;
 143         u8 halt_pending;
 144         u8 do_split;
 145         u8 complete_split;
 146         u8 hub_addr;
 147         u8 hub_port;
 148         u8 xact_pos;
 149 #define DWC2_HCSPLT_XACTPOS_MID HCSPLT_XACTPOS_MID
 150 #define DWC2_HCSPLT_XACTPOS_END HCSPLT_XACTPOS_END
 151 #define DWC2_HCSPLT_XACTPOS_BEGIN HCSPLT_XACTPOS_BEGIN
 152 #define DWC2_HCSPLT_XACTPOS_ALL HCSPLT_XACTPOS_ALL
 153
 154         u8 requests;
 155         u8 schinfo;
 156         u16 ntd;
 157         enum dwc2_halt_status halt_status;
 158         u32 hcint;
 159         struct dwc2_qh *qh;
 160         struct list_head hc_list_entry;
 161         dma_addr_t desc_list_addr;
 162 };
 163
 164 struct dwc2_hcd_pipe_info {
 165         u8 dev_addr;
 166         u8 ep_num;
 167         u8 pipe_type;
 168         u8 pipe_dir;
 169         u16 mps;
 170 };
 171
 172 struct dwc2_hcd_iso_packet_desc {
 173         u32 offset;
 174         u32 length;
 175         u32 actual_length;
 176         u32 status;
 177 };
 178
 179 struct dwc2_qtd;
 180
 181 struct dwc2_hcd_urb {
 182         void *priv;
 183         struct dwc2_qtd *qtd;
 184         void *buf;
 185         dma_addr_t dma;
 186         void *setup_packet;
 187         dma_addr_t setup_dma;
 188         u32 length;
 189         u32 actual_length;
 190         u32 status;
 191         u32 error_count;
 192         u32 packet_count;
 193         u32 flags;
 194         u16 interval;
 195         struct dwc2_hcd_pipe_info pipe_info;
 196         struct dwc2_hcd_iso_packet_desc iso_descs[0];
 197 };
 198
 199 /* Phases for control transfers */
 200 enum dwc2_control_phase {
 201         DWC2_CONTROL_SETUP,
 202         DWC2_CONTROL_DATA,
 203         DWC2_CONTROL_STATUS,
 204 };
 205
 206 /* Transaction types */
 207 enum dwc2_transaction_type {
 208         DWC2_TRANSACTION_NONE,
 209         DWC2_TRANSACTION_PERIODIC,
 210         DWC2_TRANSACTION_NON_PERIODIC,
 211         DWC2_TRANSACTION_ALL,
 212 };
 213
 214 /**
 215  * struct dwc2_qh - Software queue head structure
 216  *
 217  * @ep_type:            Endpoint type. One of the following values:
 218  *                       - USB_ENDPOINT_XFER_CONTROL
 219  *                       - USB_ENDPOINT_XFER_BULK
 220  *                       - USB_ENDPOINT_XFER_INT
 221  *                       - USB_ENDPOINT_XFER_ISOC
 222  * @ep_is_in:           Endpoint direction
 223  * @maxp:               Value from wMaxPacketSize field of Endpoint Descriptor
 224  * @dev_speed:          Device speed. One of the following values:
 225  *                       - USB_SPEED_LOW
 226  *                       - USB_SPEED_FULL
 227  *                       - USB_SPEED_HIGH
 228  * @data_toggle:        Determines the PID of the next data packet for
 229  *                      non-controltransfers. Ignored for control transfers.
 230  *                      One of the following values:
 231  *                       - DWC2_HC_PID_DATA0
 232  *                       - DWC2_HC_PID_DATA1
 233  * @ping_state:         Ping state
 234  * @do_split:           Full/low speed endpoint on high-speed hub requires split
 235  * @td_first:           Index of first activated isochronous transfer descriptor
 236  * @td_last:            Index of last activated isochronous transfer descriptor
 237  * @usecs:              Bandwidth in microseconds per (micro)frame
 238  * @interval:           Interval between transfers in (micro)frames
 239  * @sched_frame:        (Micro)frame to initialize a periodic transfer.
 240  *                      The transfer executes in the following (micro)frame.
 241  * @frame_usecs:        Internal variable used by the microframe scheduler
 242  * @start_split_frame:  (Micro)frame at which last start split was initialized
 243  * @ntd:                Actual number of transfer descriptors in a list
 244  * @dw_align_buf:       Used instead of original buffer if its physical address
 245  *                      is not dword-aligned
 246  * @dw_align_buf_dma:   DMA address for align_buf
 247  * @qtd_list:           List of QTDs for this QH
 248  * @channel:            Host channel currently processing transfers for this QH
 249  * @qh_list_entry:      Entry for QH in either the periodic or non-periodic
 250  *                      schedule
 251  * @desc_list:          List of transfer descriptors
 252  * @desc_list_dma:      Physical address of desc_list
 253  * @n_bytes:            Xfer Bytes array. Each element corresponds to a transfer
 254  *                      descriptor and indicates original XferSize value for the
 255  *                      descriptor
 256  * @tt_buffer_dirty     True if clear_tt_buffer_complete is pending
 257  *
 258  * A Queue Head (QH) holds the static characteristics of an endpoint and
 259  * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
 260  * be entered in either the non-periodic or periodic schedule.
 261  */
 262 struct dwc2_qh {
 263         u8 ep_type;
 264         u8 ep_is_in;
 265         u16 maxp;
 266         u8 dev_speed;
 267         u8 data_toggle;
 268         u8 ping_state;
 269         u8 do_split;
 270         u8 td_first;
 271         u8 td_last;
 272         u16 usecs;
 273         u16 interval;
 274         u16 sched_frame;
 275         u16 frame_usecs[8];
 276         u16 start_split_frame;
 277         u16 ntd;
 278         u8 *dw_align_buf;
 279         dma_addr_t dw_align_buf_dma;
 280         struct list_head qtd_list;
 281         struct dwc2_host_chan *channel;
 282         struct list_head qh_list_entry;
 283         struct dwc2_hcd_dma_desc *desc_list;
 284         dma_addr_t desc_list_dma;
 285         u32 *n_bytes;
 286         unsigned tt_buffer_dirty:1;
 287 };
 288
 289 /**
 290  * struct dwc2_qtd - Software queue transfer descriptor (QTD)
 291  *
 292  * @control_phase:      Current phase for control transfers (Setup, Data, or
 293  *                      Status)
 294  * @in_process:         Indicates if this QTD is currently processed by HW
 295  * @data_toggle:        Determines the PID of the next data packet for the
 296  *                      data phase of control transfers. Ignored for other
 297  *                      transfer types. One of the following values:
 298  *                       - DWC2_HC_PID_DATA0
 299  *                       - DWC2_HC_PID_DATA1
 300  * @complete_split:     Keeps track of the current split type for FS/LS
 301  *                      endpoints on a HS Hub
 302  * @isoc_split_pos:     Position of the ISOC split in full/low speed
 303  * @isoc_frame_index:   Index of the next frame descriptor for an isochronous
 304  *                      transfer. A frame descriptor describes the buffer
 305  *                      position and length of the data to be transferred in the
 306  *                      next scheduled (micro)frame of an isochronous transfer.
 307  *                      It also holds status for that transaction. The frame
 308  *                      index starts at 0.
 309  * @isoc_split_offset:  Position of the ISOC split in the buffer for the
 310  *                      current frame
 311  * @ssplit_out_xfer_count: How many bytes transferred during SSPLIT OUT
 312  * @error_count:        Holds the number of bus errors that have occurred for
 313  *                      a transaction within this transfer
 314  * @n_desc:             Number of DMA descriptors for this QTD
 315  * @isoc_frame_index_last: Last activated frame (packet) index, used in
 316  *                      descriptor DMA mode only
 317  * @urb:                URB for this transfer
 318  * @qh:                 Queue head for this QTD
 319  * @qtd_list_entry:     For linking to the QH's list of QTDs
 320  *
 321  * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
 322  * interrupt, or isochronous transfer. A single QTD is created for each URB
 323  * (of one of these types) submitted to the HCD. The transfer associated with
 324  * a QTD may require one or multiple transactions.
 325  *
 326  * A QTD is linked to a Queue Head, which is entered in either the
 327  * non-periodic or periodic schedule for execution. When a QTD is chosen for
 328  * execution, some or all of its transactions may be executed. After
 329  * execution, the state of the QTD is updated. The QTD may be retired if all
 330  * its transactions are complete or if an error occurred. Otherwise, it
 331  * remains in the schedule so more transactions can be executed later.
 332  */
 333 struct dwc2_qtd {
 334         enum dwc2_control_phase control_phase;
 335         u8 in_process;
 336         u8 data_toggle;
 337         u8 complete_split;
 338         u8 isoc_split_pos;
 339         u16 isoc_frame_index;
 340         u16 isoc_split_offset;
 341         u32 ssplit_out_xfer_count;
 342         u8 error_count;
 343         u8 n_desc;
 344         u16 isoc_frame_index_last;
 345         struct dwc2_hcd_urb *urb;
 346         struct dwc2_qh *qh;
 347         struct list_head qtd_list_entry;
 348 };
 349
 350 #ifdef DEBUG
 351 struct hc_xfer_info {
 352         struct dwc2_hsotg *hsotg;
 353         struct dwc2_host_chan *chan;
 354 };
 355 #endif
 356
 357 /* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
 358 static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
 359 {
 360         return (struct usb_hcd *)hsotg->priv;
 361 }
 362
 363 /*
 364  * Inline used to disable one channel interrupt. Channel interrupts are
 365  * disabled when the channel is halted or released by the interrupt handler.
 366  * There is no need to handle further interrupts of that type until the
 367  * channel is re-assigned. In fact, subsequent handling may cause crashes
 368  * because the channel structures are cleaned up when the channel is released.
 369  */
 370 static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
 371 {
 372         u32 mask = readl(hsotg->regs + HCINTMSK(chnum));
 373
 374         mask &= ~intr;
 375         writel(mask, hsotg->regs + HCINTMSK(chnum));
 376 }
 377
 378 /*
 379  * Returns the mode of operation, host or device
 380  */
 381 static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
 382 {
 383         return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
 384 }
 385 static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
 386 {
 387         return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
 388 }
 389
 390 /*
 391  * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
 392  * are read as 1, they won't clear when written back.
 393  */
 394 static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
 395 {
 396         u32 hprt0 = readl(hsotg->regs + HPRT0);
 397
 398         hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
 399         return hprt0;
 400 }
 401
 402 static inline u8 dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info *pipe)
 403 {
 404         return pipe->ep_num;
 405 }
 406
 407 static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
 408 {
 409         return pipe->pipe_type;
 410 }
 411
 412 static inline u16 dwc2_hcd_get_mps(struct dwc2_hcd_pipe_info *pipe)
 413 {
 414         return pipe->mps;
 415 }
 416
 417 static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
 418 {
 419         return pipe->dev_addr;
 420 }
 421
 422 static inline u8 dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info *pipe)
 423 {
 424         return pipe->pipe_type == USB_ENDPOINT_XFER_ISOC;
 425 }
 426
 427 static inline u8 dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info *pipe)
 428 {
 429         return pipe->pipe_type == USB_ENDPOINT_XFER_INT;
 430 }
 431
 432 static inline u8 dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info *pipe)
 433 {
 434         return pipe->pipe_type == USB_ENDPOINT_XFER_BULK;
 435 }
 436
 437 static inline u8 dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info *pipe)
 438 {
 439         return pipe->pipe_type == USB_ENDPOINT_XFER_CONTROL;
 440 }
 441
 442 static inline u8 dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info *pipe)
 443 {
 444         return pipe->pipe_dir == USB_DIR_IN;
 445 }
 446
 447 static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe)
 448 {
 449         return !dwc2_hcd_is_pipe_in(pipe);
 450 }
 451
 452 extern int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
 453                          const struct dwc2_core_params *params);
 454 extern void dwc2_hcd_remove(struct dwc2_hsotg *hsotg);
 455 extern void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
 456                                 const struct dwc2_core_params *params);
 457 extern void dwc2_set_all_params(struct dwc2_core_params *params, int value);
 458 extern int dwc2_get_hwparams(struct dwc2_hsotg *hsotg);
 459
 460 /* Transaction Execution Functions */
 461 extern enum dwc2_transaction_type dwc2_hcd_select_transactions(
 462                                                 struct dwc2_hsotg *hsotg);
 463 extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
 464                                         enum dwc2_transaction_type tr_type);
 465
 466 /* Schedule Queue Functions */
 467 /* Implemented in hcd_queue.c */
 468 extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg);
 469 extern void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
 470 extern int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
 471 extern void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
 472 extern void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 473                                    int sched_csplit);
 474
 475 extern void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb);
 476 extern int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
 477                             struct dwc2_qh **qh, gfp_t mem_flags);
 478
 479 /* Unlinks and frees a QTD */
 480 static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg,
 481                                                 struct dwc2_qtd *qtd,
 482                                                 struct dwc2_qh *qh)
 483 {
 484         list_del(&qtd->qtd_list_entry);
 485         kfree(qtd);
 486 }
 487
 488 /* Descriptor DMA support functions */
 489 extern void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg,
 490                                      struct dwc2_qh *qh);
 491 extern void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg,
 492                                         struct dwc2_host_chan *chan, int chnum,
 493                                         enum dwc2_halt_status halt_status);
 494
 495 extern int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 496                                  gfp_t mem_flags);
 497 extern void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
 498
 499 /* Check if QH is non-periodic */
 500 #define dwc2_qh_is_non_per(_qh_ptr_) \
 501         ((_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_BULK || \
 502          (_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_CONTROL)
 503
 504 #ifdef CONFIG_USB_DWC2_DEBUG_PERIODIC
 505 static inline bool dbg_hc(struct dwc2_host_chan *hc) { return true; }
 506 static inline bool dbg_qh(struct dwc2_qh *qh) { return true; }
 507 static inline bool dbg_urb(struct urb *urb) { return true; }
 508 static inline bool dbg_perio(void) { return true; }
 509 #else /* !CONFIG_USB_DWC2_DEBUG_PERIODIC */
 510 static inline bool dbg_hc(struct dwc2_host_chan *hc)
 511 {
 512         return hc->ep_type == USB_ENDPOINT_XFER_BULK ||
 513                hc->ep_type == USB_ENDPOINT_XFER_CONTROL;
 514 }
 515
 516 static inline bool dbg_qh(struct dwc2_qh *qh)
 517 {
 518         return qh->ep_type == USB_ENDPOINT_XFER_BULK ||
 519                qh->ep_type == USB_ENDPOINT_XFER_CONTROL;
 520 }
 521
 522 static inline bool dbg_urb(struct urb *urb)
 523 {
 524         return usb_pipetype(urb->pipe) == PIPE_BULK ||
 525                usb_pipetype(urb->pipe) == PIPE_CONTROL;
 526 }
 527
 528 static inline bool dbg_perio(void) { return false; }
 529 #endif
 530
 531 /* High bandwidth multiplier as encoded in highspeed endpoint descriptors */
 532 #define dwc2_hb_mult(wmaxpacketsize) (1 + (((wmaxpacketsize) >> 11) & 0x03))
 533
 534 /* Packet size for any kind of endpoint descriptor */
 535 #define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff)
 536
 537 /*
 538  * Returns true if frame1 is less than or equal to frame2. The comparison is
 539  * done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the
 540  * frame number when the max frame number is reached.
 541  */
 542 static inline int dwc2_frame_num_le(u16 frame1, u16 frame2)
 543 {
 544         return ((frame2 - frame1) & HFNUM_MAX_FRNUM) <= (HFNUM_MAX_FRNUM >> 1);
 545 }
 546
 547 /*
 548  * Returns true if frame1 is greater than frame2. The comparison is done
 549  * modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
 550  * number when the max frame number is reached.
 551  */
 552 static inline int dwc2_frame_num_gt(u16 frame1, u16 frame2)
 553 {
 554         return (frame1 != frame2) &&
 555                ((frame1 - frame2) & HFNUM_MAX_FRNUM) < (HFNUM_MAX_FRNUM >> 1);
 556 }
 557
 558 /*
 559  * Increments frame by the amount specified by inc. The addition is done
 560  * modulo HFNUM_MAX_FRNUM. Returns the incremented value.
 561  */
 562 static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc)
 563 {
 564         return (frame + inc) & HFNUM_MAX_FRNUM;
 565 }
 566
 567 static inline u16 dwc2_full_frame_num(u16 frame)
 568 {
 569         return (frame & HFNUM_MAX_FRNUM) >> 3;
 570 }
 571
 572 static inline u16 dwc2_micro_frame_num(u16 frame)
 573 {
 574         return frame & 0x7;
 575 }
 576
 577 /*
 578  * Returns the Core Interrupt Status register contents, ANDed with the Core
 579  * Interrupt Mask register contents
 580  */
 581 static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
 582 {
 583         return readl(hsotg->regs + GINTSTS) & readl(hsotg->regs + GINTMSK);
 584 }
 585
 586 static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
 587 {
 588         return dwc2_urb->status;
 589 }
 590
 591 static inline u32 dwc2_hcd_urb_get_actual_length(
 592                 struct dwc2_hcd_urb *dwc2_urb)
 593 {
 594         return dwc2_urb->actual_length;
 595 }
 596
 597 static inline u32 dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb *dwc2_urb)
 598 {
 599         return dwc2_urb->error_count;
 600 }
 601
 602 static inline void dwc2_hcd_urb_set_iso_desc_params(
 603                 struct dwc2_hcd_urb *dwc2_urb, int desc_num, u32 offset,
 604                 u32 length)
 605 {
 606         dwc2_urb->iso_descs[desc_num].offset = offset;
 607         dwc2_urb->iso_descs[desc_num].length = length;
 608 }
 609
 610 static inline u32 dwc2_hcd_urb_get_iso_desc_status(
 611                 struct dwc2_hcd_urb *dwc2_urb, int desc_num)
 612 {
 613         return dwc2_urb->iso_descs[desc_num].status;
 614 }
 615
 616 static inline u32 dwc2_hcd_urb_get_iso_desc_actual_length(
 617                 struct dwc2_hcd_urb *dwc2_urb, int desc_num)
 618 {
 619         return dwc2_urb->iso_descs[desc_num].actual_length;
 620 }
 621
 622 static inline int dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg *hsotg,
 623                                                   struct usb_host_endpoint *ep)
 624 {
 625         struct dwc2_qh *qh = ep->hcpriv;
 626
 627         if (qh && !list_empty(&qh->qh_list_entry))
 628                 return 1;
 629
 630         return 0;
 631 }
 632
 633 static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg,
 634                                             struct usb_host_endpoint *ep)
 635 {
 636         struct dwc2_qh *qh = ep->hcpriv;
 637
 638         if (!qh) {
 639                 WARN_ON(1);
 640                 return 0;
 641         }
 642
 643         return qh->usecs;
 644 }
 645
 646 extern void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
 647                                       struct dwc2_host_chan *chan, int chnum,
 648                                       struct dwc2_qtd *qtd);
 649
 650 /* HCD Core API */
 651
 652 /**
 653  * dwc2_handle_hcd_intr() - Called on every hardware interrupt
 654  *
 655  * @hsotg: The DWC2 HCD
 656  *
 657  * Returns IRQ_HANDLED if interrupt is handled
 658  * Return IRQ_NONE if interrupt is not handled
 659  */
 660 extern irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg);
 661
 662 /**
 663  * dwc2_hcd_stop() - Halts the DWC_otg host mode operation
 664  *
 665  * @hsotg: The DWC2 HCD
 666  */
 667 extern void dwc2_hcd_stop(struct dwc2_hsotg *hsotg);
 668
 669 extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
 670 extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
 671
 672 /**
 673  * dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host,
 674  * and 0 otherwise
 675  *
 676  * @hsotg: The DWC2 HCD
 677  */
 678 extern int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg);
 679
 680 /**
 681  * dwc2_hcd_get_frame_number() - Returns current frame number
 682  *
 683  * @hsotg: The DWC2 HCD
 684  */
 685 extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
 686
 687 /**
 688  * dwc2_hcd_dump_state() - Dumps hsotg state
 689  *
 690  * @hsotg: The DWC2 HCD
 691  *
 692  * NOTE: This function will be removed once the peripheral controller code
 693  * is integrated and the driver is stable
 694  */
 695 extern void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg);
 696
 697 /**
 698  * dwc2_hcd_dump_frrem() - Dumps the average frame remaining at SOF
 699  *
 700  * @hsotg: The DWC2 HCD
 701  *
 702  * This can be used to determine average interrupt latency. Frame remaining is
 703  * also shown for start transfer and two additional sample points.
 704  *
 705  * NOTE: This function will be removed once the peripheral controller code
 706  * is integrated and the driver is stable
 707  */
 708 extern void dwc2_hcd_dump_frrem(struct dwc2_hsotg *hsotg);
 709
 710 /* URB interface */
 711
 712 /* Transfer flags */
 713 #define URB_GIVEBACK_ASAP       0x1
 714 #define URB_SEND_ZERO_PACKET    0x2
 715
 716 /* Host driver callbacks */
 717
 718 extern void dwc2_host_start(struct dwc2_hsotg *hsotg);
 719 extern void dwc2_host_disconnect(struct dwc2_hsotg *hsotg);
 720 extern void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
 721                                int *hub_addr, int *hub_port);
 722 extern int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context);
 723 extern void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
 724                                int status);
 725
 726 #ifdef DEBUG
 727 /*
 728  * Macro to sample the remaining PHY clocks left in the current frame. This
 729  * may be used during debugging to determine the average time it takes to
 730  * execute sections of code. There are two possible sample points, "a" and
 731  * "b", so the _letter_ argument must be one of these values.
 732  *
 733  * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
 734  * example, "cat /sys/devices/lm0/hcd_frrem".
 735  */
 736 #define dwc2_sample_frrem(_hcd_, _qh_, _letter_)                        \
 737 do {                                                                    \
 738         struct hfnum_data _hfnum_;                                      \
 739         struct dwc2_qtd *_qtd_;                                         \
 740                                                                         \
 741         _qtd_ = list_entry((_qh_)->qtd_list.next, struct dwc2_qtd,      \
 742                            qtd_list_entry);                             \
 743         if (usb_pipeint(_qtd_->urb->pipe) &&                            \
 744             (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) { \
 745                 _hfnum_.d32 = readl((_hcd_)->regs + HFNUM);             \
 746                 switch (_hfnum_.b.frnum & 0x7) {                        \
 747                 case 7:                                                 \
 748                         (_hcd_)->hfnum_7_samples_##_letter_++;          \
 749                         (_hcd_)->hfnum_7_frrem_accum_##_letter_ +=      \
 750                                 _hfnum_.b.frrem;                        \
 751                         break;                                          \
 752                 case 0:                                                 \
 753                         (_hcd_)->hfnum_0_samples_##_letter_++;          \
 754                         (_hcd_)->hfnum_0_frrem_accum_##_letter_ +=      \
 755                                 _hfnum_.b.frrem;                        \
 756                         break;                                          \
 757                 default:                                                \
 758                         (_hcd_)->hfnum_other_samples_##_letter_++;      \
 759                         (_hcd_)->hfnum_other_frrem_accum_##_letter_ +=  \
 760                                 _hfnum_.b.frrem;                        \
 761                         break;                                          \
 762                 }                                                       \
 763         }                                                               \
 764 } while (0)
 765 #else
 766 #define dwc2_sample_frrem(_hcd_, _qh_, _letter_)        do {} while (0)
 767 #endif
 768
 769 #endif /* __DWC2_HCD_H__ */