drivers/video/auo_k1901fb.c

   1 /*
   2  * auok190xfb.c -- FB driver for AUO-K1901 controllers
   3  *
   4  * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
   5  *
   6  * based on broadsheetfb.c
   7  *
   8  * Copyright (C) 2008, Jaya Kumar
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  *
  14  * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
  15  *
  16  * This driver is written to be used with the AUO-K1901 display controller.
  17  *
  18  * It is intended to be architecture independent. A board specific driver
  19  * must be used to perform all the physical IO interactions.
  20  *
  21  * The controller supports different update modes:
  22  * mode0+1 16 step gray (4bit)
  23  * mode2+3 4 step gray (2bit)
  24  * mode4+5 2 step gray (1bit)
  25  * - mode4 is described as "without LUT"
  26  * mode7 automatic selection of update mode
  27  *
  28  * The most interesting difference to the K1900 is the ability to do screen
  29  * updates in an asynchronous fashion. Where the K1900 needs to wait for the
  30  * current update to complete, the K1901 can process later updates already.
  31  */
  32
  33 #include <linux/module.h>
  34 #include <linux/kernel.h>
  35 #include <linux/errno.h>
  36 #include <linux/string.h>
  37 #include <linux/mm.h>
  38 #include <linux/slab.h>
  39 #include <linux/delay.h>
  40 #include <linux/interrupt.h>
  41 #include <linux/fb.h>
  42 #include <linux/init.h>
  43 #include <linux/platform_device.h>
  44 #include <linux/list.h>
  45 #include <linux/firmware.h>
  46 #include <linux/gpio.h>
  47 #include <linux/pm_runtime.h>
  48
  49 #include <video/auo_k190xfb.h>
  50
  51 #include "auo_k190x.h"
  52
  53 /*
  54  * AUO-K1901 specific commands
  55  */
  56
  57 #define AUOK1901_CMD_LUT_INTERFACE      0x0005
  58 #define AUOK1901_CMD_DMA_START          0x1001
  59 #define AUOK1901_CMD_CURSOR_START       0x1007
  60 #define AUOK1901_CMD_CURSOR_STOP        AUOK190X_CMD_DATA_STOP
  61 #define AUOK1901_CMD_DDMA_START         0x1009
  62
  63 #define AUOK1901_INIT_GATE_PULSE_LOW    (0 << 14)
  64 #define AUOK1901_INIT_GATE_PULSE_HIGH   (1 << 14)
  65 #define AUOK1901_INIT_SINGLE_GATE       (0 << 13)
  66 #define AUOK1901_INIT_DOUBLE_GATE       (1 << 13)
  67
  68 /* Bits to pixels
  69  *   Mode       15-12   11-8    7-4     3-0
  70  *   format2    2       T       1       T
  71  *   format3    1       T       2       T
  72  *   format4    T       2       T       1
  73  *   format5    T       1       T       2
  74  *
  75  *   halftone modes:
  76  *   format6    2       2       1       1
  77  *   format7    1       1       2       2
  78  */
  79 #define AUOK1901_INIT_FORMAT2           (1 << 7)
  80 #define AUOK1901_INIT_FORMAT3           ((1 << 7) | (1 << 6))
  81 #define AUOK1901_INIT_FORMAT4           (1 << 8)
  82 #define AUOK1901_INIT_FORMAT5           ((1 << 8) | (1 << 6))
  83 #define AUOK1901_INIT_FORMAT6           ((1 << 8) | (1 << 7))
  84 #define AUOK1901_INIT_FORMAT7           ((1 << 8) | (1 << 7) | (1 << 6))
  85
  86 /* res[4] to bit 10
  87  * res[3-0] to bits 5-2
  88  */
  89 #define AUOK1901_INIT_RESOLUTION(_res)  (((_res & (1 << 4)) << 6) \
  90                                          | ((_res & 0xf) << 2))
  91
  92 /*
  93  * portrait / landscape orientation in AUOK1901_CMD_DMA_START
  94  */
  95 #define AUOK1901_DMA_ROTATE90(_rot)             ((_rot & 1) << 13)
  96
  97 /*
  98  * equivalent to 1 << 11, needs the ~ to have same rotation like K1900
  99  */
 100 #define AUOK1901_DDMA_ROTATE180(_rot)           ((~_rot & 2) << 10)
 101
 102 static void auok1901_init(struct auok190xfb_par *par)
 103 {
 104         struct device *dev = par->info->device;
 105         struct auok190x_board *board = par->board;
 106         u16 init_param = 0;
 107
 108         pm_runtime_get_sync(dev);
 109
 110         init_param |= AUOK190X_INIT_INVERSE_WHITE;
 111         init_param |= AUOK190X_INIT_FORMAT0;
 112         init_param |= AUOK1901_INIT_RESOLUTION(par->resolution);
 113         init_param |= AUOK190X_INIT_SHIFT_LEFT;
 114
 115         auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);
 116
 117         /* let the controller finish */
 118         board->wait_for_rdy(par);
 119
 120         pm_runtime_mark_last_busy(dev);
 121         pm_runtime_put_autosuspend(dev);
 122 }
 123
 124 static void auok1901_update_region(struct auok190xfb_par *par, int mode,
 125                                                 u16 y1, u16 y2)
 126 {
 127         struct device *dev = par->info->device;
 128         unsigned char *buf = (unsigned char *)par->info->screen_base;
 129         int xres = par->info->var.xres;
 130         int line_length = par->info->fix.line_length;
 131         u16 args[5];
 132
 133         pm_runtime_get_sync(dev);
 134
 135         mutex_lock(&(par->io_lock));
 136
 137         /* y1 and y2 must be a multiple of 2 so drop the lowest bit */
 138         y1 &= 0xfffe;
 139         y2 &= 0xfffe;
 140
 141         dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
 142                 1, y1+1, xres, y2-y1, mode);
 143
 144         /* K1901: first transfer the region data */
 145         args[0] = AUOK1901_DMA_ROTATE90(par->rotation) | 1;
 146         args[1] = y1 + 1;
 147         args[2] = xres;
 148         args[3] = y2 - y1;
 149         buf += y1 * line_length;
 150         auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
 151                                             args, ((y2 - y1) * line_length)/2,
 152                                             (u16 *) buf);
 153         auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);
 154
 155         /* K1901: second tell the controller to update the region with mode */
 156         args[0] = mode | AUOK1901_DDMA_ROTATE180(par->rotation);
 157         args[1] = 1;
 158         args[2] = y1 + 1;
 159         args[3] = xres;
 160         args[4] = y2 - y1;
 161         auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args);
 162
 163         par->update_cnt++;
 164
 165         mutex_unlock(&(par->io_lock));
 166
 167         pm_runtime_mark_last_busy(dev);
 168         pm_runtime_put_autosuspend(dev);
 169 }
 170
 171 static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par,
 172                                                 u16 y1, u16 y2)
 173 {
 174         int mode;
 175
 176         if (par->update_mode < 0) {
 177                 mode = AUOK190X_UPDATE_MODE(1);
 178                 par->last_mode = -1;
 179         } else {
 180                 mode = AUOK190X_UPDATE_MODE(par->update_mode);
 181                 par->last_mode = par->update_mode;
 182         }
 183
 184         if (par->flash)
 185                 mode |= AUOK190X_UPDATE_NONFLASH;
 186
 187         auok1901_update_region(par, mode, y1, y2);
 188 }
 189
 190 static void auok1901fb_dpy_update(struct auok190xfb_par *par)
 191 {
 192         int mode;
 193
 194         /* When doing full updates, wait for the controller to be ready
 195          * This will hopefully catch some hangs of the K1901
 196          */
 197         par->board->wait_for_rdy(par);
 198
 199         if (par->update_mode < 0) {
 200                 mode = AUOK190X_UPDATE_MODE(0);
 201                 par->last_mode = -1;
 202         } else {
 203                 mode = AUOK190X_UPDATE_MODE(par->update_mode);
 204                 par->last_mode = par->update_mode;
 205         }
 206
 207         if (par->flash)
 208                 mode |= AUOK190X_UPDATE_NONFLASH;
 209
 210         auok1901_update_region(par, mode, 0, par->info->var.yres);
 211         par->update_cnt = 0;
 212 }
 213
 214 static bool auok1901fb_need_refresh(struct auok190xfb_par *par)
 215 {
 216         return (par->update_cnt > 10);
 217 }
 218
 219 static int auok1901fb_probe(struct platform_device *pdev)
 220 {
 221         struct auok190x_init_data init;
 222         struct auok190x_board *board;
 223
 224         /* pick up board specific routines */
 225         board = pdev->dev.platform_data;
 226         if (!board)
 227                 return -EINVAL;
 228
 229         /* fill temporary init struct for common init */
 230         init.id = "auo_k1901fb";
 231         init.board = board;
 232         init.update_partial = auok1901fb_dpy_update_pages;
 233         init.update_all = auok1901fb_dpy_update;
 234         init.need_refresh = auok1901fb_need_refresh;
 235         init.init = auok1901_init;
 236
 237         return auok190x_common_probe(pdev, &init);
 238 }
 239
 240 static int auok1901fb_remove(struct platform_device *pdev)
 241 {
 242         return auok190x_common_remove(pdev);
 243 }
 244
 245 static struct platform_driver auok1901fb_driver = {
 246         .probe  = auok1901fb_probe,
 247         .remove = auok1901fb_remove,
 248         .driver = {
 249                 .owner  = THIS_MODULE,
 250                 .name   = "auo_k1901fb",
 251                 .pm = &auok190x_pm,
 252         },
 253 };
 254 module_platform_driver(auok1901fb_driver);
 255
 256 MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller");
 257 MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
 258 MODULE_LICENSE("GPL");