drivers/block/drbd/drbd_proc.c

   1 /*
   2    drbd_proc.c
   3
   4    This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
   5
   6    Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
   7    Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
   8    Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
   9
  10    drbd is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2, or (at your option)
  13    any later version.
  14
  15    drbd is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with drbd; see the file COPYING.  If not, write to
  22    the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  23
  24  */
  25
  26 #include <linux/module.h>
  27
  28 #include <asm/uaccess.h>
  29 #include <linux/fs.h>
  30 #include <linux/file.h>
  31 #include <linux/proc_fs.h>
  32 #include <linux/seq_file.h>
  33 #include <linux/drbd.h>
  34 #include "drbd_int.h"
  35
  36 static int drbd_proc_open(struct inode *inode, struct file *file);
  37 static int drbd_proc_release(struct inode *inode, struct file *file);
  38
  39
  40 struct proc_dir_entry *drbd_proc;
  41 const struct file_operations drbd_proc_fops = {
  42         .owner          = THIS_MODULE,
  43         .open           = drbd_proc_open,
  44         .read           = seq_read,
  45         .llseek         = seq_lseek,
  46         .release        = drbd_proc_release,
  47 };
  48
  49 static void seq_printf_with_thousands_grouping(struct seq_file *seq, long v)
  50 {
  51         /* v is in kB/sec. We don't expect TiByte/sec yet. */
  52         if (unlikely(v >= 1000000)) {
  53                 /* cool: > GiByte/s */
  54                 seq_printf(seq, "%ld,", v / 1000000);
  55                 v %= 1000000;
  56                 seq_printf(seq, "%03ld,%03ld", v/1000, v % 1000);
  57         } else if (likely(v >= 1000))
  58                 seq_printf(seq, "%ld,%03ld", v/1000, v % 1000);
  59         else
  60                 seq_printf(seq, "%ld", v);
  61 }
  62
  63 static void drbd_get_syncer_progress(struct drbd_device *device,
  64                 union drbd_dev_state state, unsigned long *rs_total,
  65                 unsigned long *bits_left, unsigned int *per_mil_done)
  66 {
  67         /* this is to break it at compile time when we change that, in case we
  68          * want to support more than (1<<32) bits on a 32bit arch. */
  69         typecheck(unsigned long, device->rs_total);
  70         *rs_total = device->rs_total;
  71
  72         /* note: both rs_total and rs_left are in bits, i.e. in
  73          * units of BM_BLOCK_SIZE.
  74          * for the percentage, we don't care. */
  75
  76         if (state.conn == C_VERIFY_S || state.conn == C_VERIFY_T)
  77                 *bits_left = device->ov_left;
  78         else
  79                 *bits_left = drbd_bm_total_weight(device) - device->rs_failed;
  80         /* >> 10 to prevent overflow,
  81          * +1 to prevent division by zero */
  82         if (*bits_left > *rs_total) {
  83                 /* D'oh. Maybe a logic bug somewhere.  More likely just a race
  84                  * between state change and reset of rs_total.
  85                  */
  86                 *bits_left = *rs_total;
  87                 *per_mil_done = *rs_total ? 0 : 1000;
  88         } else {
  89                 /* Make sure the division happens in long context.
  90                  * We allow up to one petabyte storage right now,
  91                  * at a granularity of 4k per bit that is 2**38 bits.
  92                  * After shift right and multiplication by 1000,
  93                  * this should still fit easily into a 32bit long,
  94                  * so we don't need a 64bit division on 32bit arch.
  95                  * Note: currently we don't support such large bitmaps on 32bit
  96                  * arch anyways, but no harm done to be prepared for it here.
  97                  */
  98                 unsigned int shift = *rs_total > UINT_MAX ? 16 : 10;
  99                 unsigned long left = *bits_left >> shift;
 100                 unsigned long total = 1UL + (*rs_total >> shift);
 101                 unsigned long tmp = 1000UL - left * 1000UL/total;
 102                 *per_mil_done = tmp;
 103         }
 104 }
 105
 106
 107 /*lge
 108  * progress bars shamelessly adapted from driver/md/md.c
 109  * output looks like
 110  *      [=====>..............] 33.5% (23456/123456)
 111  *      finish: 2:20:20 speed: 6,345 (6,456) K/sec
 112  */
 113 static void drbd_syncer_progress(struct drbd_device *device, struct seq_file *seq,
 114                 union drbd_dev_state state)
 115 {
 116         unsigned long db, dt, dbdt, rt, rs_total, rs_left;
 117         unsigned int res;
 118         int i, x, y;
 119         int stalled = 0;
 120
 121         drbd_get_syncer_progress(device, state, &rs_total, &rs_left, &res);
 122
 123         x = res/50;
 124         y = 20-x;
 125         seq_printf(seq, "\t[");
 126         for (i = 1; i < x; i++)
 127                 seq_printf(seq, "=");
 128         seq_printf(seq, ">");
 129         for (i = 0; i < y; i++)
 130                 seq_printf(seq, ".");
 131         seq_printf(seq, "] ");
 132
 133         if (state.conn == C_VERIFY_S || state.conn == C_VERIFY_T)
 134                 seq_printf(seq, "verified:");
 135         else
 136                 seq_printf(seq, "sync'ed:");
 137         seq_printf(seq, "%3u.%u%% ", res / 10, res % 10);
 138
 139         /* if more than a few GB, display in MB */
 140         if (rs_total > (4UL << (30 - BM_BLOCK_SHIFT)))
 141                 seq_printf(seq, "(%lu/%lu)M",
 142                             (unsigned long) Bit2KB(rs_left >> 10),
 143                             (unsigned long) Bit2KB(rs_total >> 10));
 144         else
 145                 seq_printf(seq, "(%lu/%lu)K",
 146                             (unsigned long) Bit2KB(rs_left),
 147                             (unsigned long) Bit2KB(rs_total));
 148
 149         seq_printf(seq, "\n\t");
 150
 151         /* see drivers/md/md.c
 152          * We do not want to overflow, so the order of operands and
 153          * the * 100 / 100 trick are important. We do a +1 to be
 154          * safe against division by zero. We only estimate anyway.
 155          *
 156          * dt: time from mark until now
 157          * db: blocks written from mark until now
 158          * rt: remaining time
 159          */
 160         /* Rolling marks. last_mark+1 may just now be modified.  last_mark+2 is
 161          * at least (DRBD_SYNC_MARKS-2)*DRBD_SYNC_MARK_STEP old, and has at
 162          * least DRBD_SYNC_MARK_STEP time before it will be modified. */
 163         /* ------------------------ ~18s average ------------------------ */
 164         i = (device->rs_last_mark + 2) % DRBD_SYNC_MARKS;
 165         dt = (jiffies - device->rs_mark_time[i]) / HZ;
 166         if (dt > 180)
 167                 stalled = 1;
 168
 169         if (!dt)
 170                 dt++;
 171         db = device->rs_mark_left[i] - rs_left;
 172         rt = (dt * (rs_left / (db/100+1)))/100; /* seconds */
 173
 174         seq_printf(seq, "finish: %lu:%02lu:%02lu",
 175                 rt / 3600, (rt % 3600) / 60, rt % 60);
 176
 177         dbdt = Bit2KB(db/dt);
 178         seq_printf(seq, " speed: ");
 179         seq_printf_with_thousands_grouping(seq, dbdt);
 180         seq_printf(seq, " (");
 181         /* ------------------------- ~3s average ------------------------ */
 182         if (proc_details >= 1) {
 183                 /* this is what drbd_rs_should_slow_down() uses */
 184                 i = (device->rs_last_mark + DRBD_SYNC_MARKS-1) % DRBD_SYNC_MARKS;
 185                 dt = (jiffies - device->rs_mark_time[i]) / HZ;
 186                 if (!dt)
 187                         dt++;
 188                 db = device->rs_mark_left[i] - rs_left;
 189                 dbdt = Bit2KB(db/dt);
 190                 seq_printf_with_thousands_grouping(seq, dbdt);
 191                 seq_printf(seq, " -- ");
 192         }
 193
 194         /* --------------------- long term average ---------------------- */
 195         /* mean speed since syncer started
 196          * we do account for PausedSync periods */
 197         dt = (jiffies - device->rs_start - device->rs_paused) / HZ;
 198         if (dt == 0)
 199                 dt = 1;
 200         db = rs_total - rs_left;
 201         dbdt = Bit2KB(db/dt);
 202         seq_printf_with_thousands_grouping(seq, dbdt);
 203         seq_printf(seq, ")");
 204
 205         if (state.conn == C_SYNC_TARGET ||
 206             state.conn == C_VERIFY_S) {
 207                 seq_printf(seq, " want: ");
 208                 seq_printf_with_thousands_grouping(seq, device->c_sync_rate);
 209         }
 210         seq_printf(seq, " K/sec%s\n", stalled ? " (stalled)" : "");
 211
 212         if (proc_details >= 1) {
 213                 /* 64 bit:
 214                  * we convert to sectors in the display below. */
 215                 unsigned long bm_bits = drbd_bm_bits(device);
 216                 unsigned long bit_pos;
 217                 unsigned long long stop_sector = 0;
 218                 if (state.conn == C_VERIFY_S ||
 219                     state.conn == C_VERIFY_T) {
 220                         bit_pos = bm_bits - device->ov_left;
 221                         if (verify_can_do_stop_sector(device))
 222                                 stop_sector = device->ov_stop_sector;
 223                 } else
 224                         bit_pos = device->bm_resync_fo;
 225                 /* Total sectors may be slightly off for oddly
 226                  * sized devices. So what. */
 227                 seq_printf(seq,
 228                         "\t%3d%% sector pos: %llu/%llu",
 229                         (int)(bit_pos / (bm_bits/100+1)),
 230                         (unsigned long long)bit_pos * BM_SECT_PER_BIT,
 231                         (unsigned long long)bm_bits * BM_SECT_PER_BIT);
 232                 if (stop_sector != 0 && stop_sector != ULLONG_MAX)
 233                         seq_printf(seq, " stop sector: %llu", stop_sector);
 234                 seq_printf(seq, "\n");
 235         }
 236 }
 237
 238 static int drbd_seq_show(struct seq_file *seq, void *v)
 239 {
 240         int i, prev_i = -1;
 241         const char *sn;
 242         struct drbd_device *device;
 243         struct net_conf *nc;
 244         union drbd_dev_state state;
 245         char wp;
 246
 247         static char write_ordering_chars[] = {
 248                 [WO_none] = 'n',
 249                 [WO_drain_io] = 'd',
 250                 [WO_bdev_flush] = 'f',
 251         };
 252
 253         seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n",
 254                    API_VERSION, PRO_VERSION_MIN, PRO_VERSION_MAX, drbd_buildtag());
 255
 256         /*
 257           cs .. connection state
 258           ro .. node role (local/remote)
 259           ds .. disk state (local/remote)
 260              protocol
 261              various flags
 262           ns .. network send
 263           nr .. network receive
 264           dw .. disk write
 265           dr .. disk read
 266           al .. activity log write count
 267           bm .. bitmap update write count
 268           pe .. pending (waiting for ack or data reply)
 269           ua .. unack'd (still need to send ack or data reply)
 270           ap .. application requests accepted, but not yet completed
 271           ep .. number of epochs currently "on the fly", P_BARRIER_ACK pending
 272           wo .. write ordering mode currently in use
 273          oos .. known out-of-sync kB
 274         */
 275
 276         rcu_read_lock();
 277         idr_for_each_entry(&drbd_devices, device, i) {
 278                 if (prev_i != i - 1)
 279                         seq_printf(seq, "\n");
 280                 prev_i = i;
 281
 282                 state = device->state;
 283                 sn = drbd_conn_str(state.conn);
 284
 285                 if (state.conn == C_STANDALONE &&
 286                     state.disk == D_DISKLESS &&
 287                     state.role == R_SECONDARY) {
 288                         seq_printf(seq, "%2d: cs:Unconfigured\n", i);
 289                 } else {
 290                         /* reset device->congestion_reason */
 291                         bdi_rw_congested(&device->rq_queue->backing_dev_info);
 292
 293                         nc = rcu_dereference(first_peer_device(device)->connection->net_conf);
 294                         wp = nc ? nc->wire_protocol - DRBD_PROT_A + 'A' : ' ';
 295                         seq_printf(seq,
 296                            "%2d: cs:%s ro:%s/%s ds:%s/%s %c %c%c%c%c%c%c\n"
 297                            "    ns:%u nr:%u dw:%u dr:%u al:%u bm:%u "
 298                            "lo:%d pe:%d ua:%d ap:%d ep:%d wo:%c",
 299                            i, sn,
 300                            drbd_role_str(state.role),
 301                            drbd_role_str(state.peer),
 302                            drbd_disk_str(state.disk),
 303                            drbd_disk_str(state.pdsk),
 304                            wp,
 305                            drbd_suspended(device) ? 's' : 'r',
 306                            state.aftr_isp ? 'a' : '-',
 307                            state.peer_isp ? 'p' : '-',
 308                            state.user_isp ? 'u' : '-',
 309                            device->congestion_reason ?: '-',
 310                            test_bit(AL_SUSPENDED, &device->flags) ? 's' : '-',
 311                            device->send_cnt/2,
 312                            device->recv_cnt/2,
 313                            device->writ_cnt/2,
 314                            device->read_cnt/2,
 315                            device->al_writ_cnt,
 316                            device->bm_writ_cnt,
 317                            atomic_read(&device->local_cnt),
 318                            atomic_read(&device->ap_pending_cnt) +
 319                            atomic_read(&device->rs_pending_cnt),
 320                            atomic_read(&device->unacked_cnt),
 321                            atomic_read(&device->ap_bio_cnt),
 322                            first_peer_device(device)->connection->epochs,
 323                            write_ordering_chars[device->resource->write_ordering]
 324                         );
 325                         seq_printf(seq, " oos:%llu\n",
 326                                    Bit2KB((unsigned long long)
 327                                            drbd_bm_total_weight(device)));
 328                 }
 329                 if (state.conn == C_SYNC_SOURCE ||
 330                     state.conn == C_SYNC_TARGET ||
 331                     state.conn == C_VERIFY_S ||
 332                     state.conn == C_VERIFY_T)
 333                         drbd_syncer_progress(device, seq, state);
 334
 335                 if (proc_details >= 1 && get_ldev_if_state(device, D_FAILED)) {
 336                         lc_seq_printf_stats(seq, device->resync);
 337                         lc_seq_printf_stats(seq, device->act_log);
 338                         put_ldev(device);
 339                 }
 340
 341                 if (proc_details >= 2)
 342                         seq_printf(seq, "\tblocked on activity log: %d\n", atomic_read(&device->ap_actlog_cnt));
 343         }
 344         rcu_read_unlock();
 345
 346         return 0;
 347 }
 348
 349 static int drbd_proc_open(struct inode *inode, struct file *file)
 350 {
 351         int err;
 352
 353         if (try_module_get(THIS_MODULE)) {
 354                 err = single_open(file, drbd_seq_show, NULL);
 355                 if (err)
 356                         module_put(THIS_MODULE);
 357                 return err;
 358         }
 359         return -ENODEV;
 360 }
 361
 362 static int drbd_proc_release(struct inode *inode, struct file *file)
 363 {
 364         module_put(THIS_MODULE);
 365         return single_release(inode, file);
 366 }
 367
 368 /* PROC FS stuff end */