drivers/mfd/wm8350-core.c

   1 /*
   2  * wm8350-core.c  --  Device access for Wolfson WM8350
   3  *
   4  * Copyright 2007, 2008 Wolfson Microelectronics PLC.
   5  *
   6  * Author: Liam Girdwood, Mark Brown
   7  *
   8  *  This program is free software; you can redistribute  it and/or modify it
   9  *  under  the terms of  the GNU General  Public License as published by the
  10  *  Free Software Foundation;  either version 2 of the  License, or (at your
  11  *  option) any later version.
  12  *
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/module.h>
  17 #include <linux/slab.h>
  18 #include <linux/bug.h>
  19 #include <linux/device.h>
  20 #include <linux/delay.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/regmap.h>
  23 #include <linux/workqueue.h>
  24
  25 #include <linux/mfd/wm8350/core.h>
  26 #include <linux/mfd/wm8350/audio.h>
  27 #include <linux/mfd/wm8350/comparator.h>
  28 #include <linux/mfd/wm8350/gpio.h>
  29 #include <linux/mfd/wm8350/pmic.h>
  30 #include <linux/mfd/wm8350/rtc.h>
  31 #include <linux/mfd/wm8350/supply.h>
  32 #include <linux/mfd/wm8350/wdt.h>
  33
  34 #define WM8350_CLOCK_CONTROL_1          0x28
  35 #define WM8350_AIF_TEST                 0x74
  36
  37 /* debug */
  38 #define WM8350_BUS_DEBUG 0
  39 #if WM8350_BUS_DEBUG
  40 #define dump(regs, src) do { \
  41         int i_; \
  42         u16 *src_ = src; \
  43         printk(KERN_DEBUG); \
  44         for (i_ = 0; i_ < regs; i_++) \
  45                 printk(" 0x%4.4x", *src_++); \
  46         printk("\n"); \
  47 } while (0);
  48 #else
  49 #define dump(bytes, src)
  50 #endif
  51
  52 #define WM8350_LOCK_DEBUG 0
  53 #if WM8350_LOCK_DEBUG
  54 #define ldbg(format, arg...) printk(format, ## arg)
  55 #else
  56 #define ldbg(format, arg...)
  57 #endif
  58
  59 /*
  60  * WM8350 Device IO
  61  */
  62 static DEFINE_MUTEX(reg_lock_mutex);
  63
  64 /*
  65  * Safe read, modify, write methods
  66  */
  67 int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
  68 {
  69         return regmap_update_bits(wm8350->regmap, reg, mask, 0);
  70 }
  71 EXPORT_SYMBOL_GPL(wm8350_clear_bits);
  72
  73 int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
  74 {
  75         return regmap_update_bits(wm8350->regmap, reg, mask, mask);
  76 }
  77 EXPORT_SYMBOL_GPL(wm8350_set_bits);
  78
  79 u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
  80 {
  81         unsigned int data;
  82         int err;
  83
  84         err = regmap_read(wm8350->regmap, reg, &data);
  85         if (err)
  86                 dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
  87
  88         return data;
  89 }
  90 EXPORT_SYMBOL_GPL(wm8350_reg_read);
  91
  92 int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
  93 {
  94         int ret;
  95
  96         ret = regmap_write(wm8350->regmap, reg, val);
  97
  98         if (ret)
  99                 dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
 100         return ret;
 101 }
 102 EXPORT_SYMBOL_GPL(wm8350_reg_write);
 103
 104 int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
 105                       u16 *dest)
 106 {
 107         int err = 0;
 108
 109         err = regmap_bulk_read(wm8350->regmap, start_reg, dest, regs);
 110         if (err)
 111                 dev_err(wm8350->dev, "block read starting from R%d failed\n",
 112                         start_reg);
 113
 114         return err;
 115 }
 116 EXPORT_SYMBOL_GPL(wm8350_block_read);
 117
 118 int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
 119                        u16 *src)
 120 {
 121         int ret = 0;
 122
 123         ret = regmap_bulk_write(wm8350->regmap, start_reg, src, regs);
 124         if (ret)
 125                 dev_err(wm8350->dev, "block write starting at R%d failed\n",
 126                         start_reg);
 127
 128         return ret;
 129 }
 130 EXPORT_SYMBOL_GPL(wm8350_block_write);
 131
 132 /**
 133  * wm8350_reg_lock()
 134  *
 135  * The WM8350 has a hardware lock which can be used to prevent writes to
 136  * some registers (generally those which can cause particularly serious
 137  * problems if misused).  This function enables that lock.
 138  */
 139 int wm8350_reg_lock(struct wm8350 *wm8350)
 140 {
 141         int ret;
 142
 143         mutex_lock(&reg_lock_mutex);
 144
 145         ldbg(__func__);
 146
 147         ret = wm8350_reg_write(wm8350, WM8350_SECURITY, WM8350_LOCK_KEY);
 148         if (ret)
 149                 dev_err(wm8350->dev, "lock failed\n");
 150
 151         wm8350->unlocked = false;
 152
 153         mutex_unlock(&reg_lock_mutex);
 154
 155         return ret;
 156 }
 157 EXPORT_SYMBOL_GPL(wm8350_reg_lock);
 158
 159 /**
 160  * wm8350_reg_unlock()
 161  *
 162  * The WM8350 has a hardware lock which can be used to prevent writes to
 163  * some registers (generally those which can cause particularly serious
 164  * problems if misused).  This function disables that lock so updates
 165  * can be performed.  For maximum safety this should be done only when
 166  * required.
 167  */
 168 int wm8350_reg_unlock(struct wm8350 *wm8350)
 169 {
 170         int ret;
 171
 172         mutex_lock(&reg_lock_mutex);
 173
 174         ldbg(__func__);
 175
 176         ret = wm8350_reg_write(wm8350, WM8350_SECURITY, WM8350_UNLOCK_KEY);
 177         if (ret)
 178                 dev_err(wm8350->dev, "unlock failed\n");
 179
 180         wm8350->unlocked = true;
 181
 182         mutex_unlock(&reg_lock_mutex);
 183
 184         return ret;
 185 }
 186 EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
 187
 188 int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
 189 {
 190         u16 reg, result = 0;
 191
 192         if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
 193                 return -EINVAL;
 194         if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
 195             && (scale != 0 || vref != 0))
 196                 return -EINVAL;
 197
 198         mutex_lock(&wm8350->auxadc_mutex);
 199
 200         /* Turn on the ADC */
 201         reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
 202         wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
 203
 204         if (scale || vref) {
 205                 reg = scale << 13;
 206                 reg |= vref << 12;
 207                 wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
 208         }
 209
 210         reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
 211         reg |= 1 << channel | WM8350_AUXADC_POLL;
 212         wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
 213
 214         /* If a late IRQ left the completion signalled then consume
 215          * the completion. */
 216         try_wait_for_completion(&wm8350->auxadc_done);
 217
 218         /* We ignore the result of the completion and just check for a
 219          * conversion result, allowing us to soldier on if the IRQ
 220          * infrastructure is not set up for the chip. */
 221         wait_for_completion_timeout(&wm8350->auxadc_done, msecs_to_jiffies(5));
 222
 223         reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
 224         if (reg & WM8350_AUXADC_POLL)
 225                 dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
 226         else
 227                 result = wm8350_reg_read(wm8350,
 228                                          WM8350_AUX1_READBACK + channel);
 229
 230         /* Turn off the ADC */
 231         reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
 232         wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
 233                          reg & ~WM8350_AUXADC_ENA);
 234
 235         mutex_unlock(&wm8350->auxadc_mutex);
 236
 237         return result & WM8350_AUXADC_DATA1_MASK;
 238 }
 239 EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
 240
 241 static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
 242 {
 243         struct wm8350 *wm8350 = irq_data;
 244
 245         complete(&wm8350->auxadc_done);
 246
 247         return IRQ_HANDLED;
 248 }
 249
 250 /*
 251  * Register a client device.  This is non-fatal since there is no need to
 252  * fail the entire device init due to a single platform device failing.
 253  */
 254 static void wm8350_client_dev_register(struct wm8350 *wm8350,
 255                                        const char *name,
 256                                        struct platform_device **pdev)
 257 {
 258         int ret;
 259
 260         *pdev = platform_device_alloc(name, -1);
 261         if (*pdev == NULL) {
 262                 dev_err(wm8350->dev, "Failed to allocate %s\n", name);
 263                 return;
 264         }
 265
 266         (*pdev)->dev.parent = wm8350->dev;
 267         platform_set_drvdata(*pdev, wm8350);
 268         ret = platform_device_add(*pdev);
 269         if (ret != 0) {
 270                 dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret);
 271                 platform_device_put(*pdev);
 272                 *pdev = NULL;
 273         }
 274 }
 275
 276 int wm8350_device_init(struct wm8350 *wm8350, int irq,
 277                        struct wm8350_platform_data *pdata)
 278 {
 279         int ret;
 280         unsigned int id1, id2, mask_rev;
 281         unsigned int cust_id, mode, chip_rev;
 282
 283         dev_set_drvdata(wm8350->dev, wm8350);
 284
 285         /* get WM8350 revision and config mode */
 286         ret = regmap_read(wm8350->regmap, WM8350_RESET_ID, &id1);
 287         if (ret != 0) {
 288                 dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
 289                 goto err;
 290         }
 291
 292         ret = regmap_read(wm8350->regmap, WM8350_ID, &id2);
 293         if (ret != 0) {
 294                 dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
 295                 goto err;
 296         }
 297
 298         ret = regmap_read(wm8350->regmap, WM8350_REVISION, &mask_rev);
 299         if (ret != 0) {
 300                 dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
 301                 goto err;
 302         }
 303
 304         if (id1 != 0x6143) {
 305                 dev_err(wm8350->dev,
 306                         "Device with ID %x is not a WM8350\n", id1);
 307                 ret = -ENODEV;
 308                 goto err;
 309         }
 310
 311         mode = (id2 & WM8350_CONF_STS_MASK) >> 10;
 312         cust_id = id2 & WM8350_CUST_ID_MASK;
 313         chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
 314         dev_info(wm8350->dev,
 315                  "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
 316                  mode, cust_id, mask_rev, chip_rev);
 317
 318         if (cust_id != 0) {
 319                 dev_err(wm8350->dev, "Unsupported CUST_ID\n");
 320                 ret = -ENODEV;
 321                 goto err;
 322         }
 323
 324         switch (mask_rev) {
 325         case 0:
 326                 wm8350->pmic.max_dcdc = WM8350_DCDC_6;
 327                 wm8350->pmic.max_isink = WM8350_ISINK_B;
 328
 329                 switch (chip_rev) {
 330                 case WM8350_REV_E:
 331                         dev_info(wm8350->dev, "WM8350 Rev E\n");
 332                         break;
 333                 case WM8350_REV_F:
 334                         dev_info(wm8350->dev, "WM8350 Rev F\n");
 335                         break;
 336                 case WM8350_REV_G:
 337                         dev_info(wm8350->dev, "WM8350 Rev G\n");
 338                         wm8350->power.rev_g_coeff = 1;
 339                         break;
 340                 case WM8350_REV_H:
 341                         dev_info(wm8350->dev, "WM8350 Rev H\n");
 342                         wm8350->power.rev_g_coeff = 1;
 343                         break;
 344                 default:
 345                         /* For safety we refuse to run on unknown hardware */
 346                         dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
 347                         ret = -ENODEV;
 348                         goto err;
 349                 }
 350                 break;
 351
 352         case 1:
 353                 wm8350->pmic.max_dcdc = WM8350_DCDC_4;
 354                 wm8350->pmic.max_isink = WM8350_ISINK_A;
 355
 356                 switch (chip_rev) {
 357                 case 0:
 358                         dev_info(wm8350->dev, "WM8351 Rev A\n");
 359                         wm8350->power.rev_g_coeff = 1;
 360                         break;
 361
 362                 case 1:
 363                         dev_info(wm8350->dev, "WM8351 Rev B\n");
 364                         wm8350->power.rev_g_coeff = 1;
 365                         break;
 366
 367                 default:
 368                         dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
 369                         ret = -ENODEV;
 370                         goto err;
 371                 }
 372                 break;
 373
 374         case 2:
 375                 wm8350->pmic.max_dcdc = WM8350_DCDC_6;
 376                 wm8350->pmic.max_isink = WM8350_ISINK_B;
 377
 378                 switch (chip_rev) {
 379                 case 0:
 380                         dev_info(wm8350->dev, "WM8352 Rev A\n");
 381                         wm8350->power.rev_g_coeff = 1;
 382                         break;
 383
 384                 default:
 385                         dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
 386                         ret = -ENODEV;
 387                         goto err;
 388                 }
 389                 break;
 390
 391         default:
 392                 dev_err(wm8350->dev, "Unknown MASK_REV\n");
 393                 ret = -ENODEV;
 394                 goto err;
 395         }
 396
 397         mutex_init(&wm8350->auxadc_mutex);
 398         init_completion(&wm8350->auxadc_done);
 399
 400         ret = wm8350_irq_init(wm8350, irq, pdata);
 401         if (ret < 0)
 402                 goto err;
 403
 404         if (wm8350->irq_base) {
 405                 ret = request_threaded_irq(wm8350->irq_base +
 406                                            WM8350_IRQ_AUXADC_DATARDY,
 407                                            NULL, wm8350_auxadc_irq, 0,
 408                                            "auxadc", wm8350);
 409                 if (ret < 0)
 410                         dev_warn(wm8350->dev,
 411                                  "Failed to request AUXADC IRQ: %d\n", ret);
 412         }
 413
 414         if (pdata && pdata->init) {
 415                 ret = pdata->init(wm8350);
 416                 if (ret != 0) {
 417                         dev_err(wm8350->dev, "Platform init() failed: %d\n",
 418                                 ret);
 419                         goto err_irq;
 420                 }
 421         }
 422
 423         wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
 424
 425         wm8350_client_dev_register(wm8350, "wm8350-codec",
 426                                    &(wm8350->codec.pdev));
 427         wm8350_client_dev_register(wm8350, "wm8350-gpio",
 428                                    &(wm8350->gpio.pdev));
 429         wm8350_client_dev_register(wm8350, "wm8350-hwmon",
 430                                    &(wm8350->hwmon.pdev));
 431         wm8350_client_dev_register(wm8350, "wm8350-power",
 432                                    &(wm8350->power.pdev));
 433         wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
 434         wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev));
 435
 436         return 0;
 437
 438 err_irq:
 439         wm8350_irq_exit(wm8350);
 440 err:
 441         return ret;
 442 }
 443 EXPORT_SYMBOL_GPL(wm8350_device_init);
 444
 445 void wm8350_device_exit(struct wm8350 *wm8350)
 446 {
 447         int i;
 448
 449         for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
 450                 platform_device_unregister(wm8350->pmic.led[i].pdev);
 451
 452         for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
 453                 platform_device_unregister(wm8350->pmic.pdev[i]);
 454
 455         platform_device_unregister(wm8350->wdt.pdev);
 456         platform_device_unregister(wm8350->rtc.pdev);
 457         platform_device_unregister(wm8350->power.pdev);
 458         platform_device_unregister(wm8350->hwmon.pdev);
 459         platform_device_unregister(wm8350->gpio.pdev);
 460         platform_device_unregister(wm8350->codec.pdev);
 461
 462         if (wm8350->irq_base)
 463                 free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
 464
 465         wm8350_irq_exit(wm8350);
 466 }
 467 EXPORT_SYMBOL_GPL(wm8350_device_exit);
 468
 469 MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
 470 MODULE_LICENSE("GPL");