?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev
[linux/fpc-iii.git] / drivers / media / video / em28xx / em28xx-cards.c
blob1c2e544eda73594cb362e1afbea1451b4ae94927
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/delay.h>
28 #include <linux/i2c.h>
29 #include <linux/usb.h>
30 #include <media/tuner.h>
31 #include <media/msp3400.h>
32 #include <media/saa7115.h>
33 #include <media/tvp5150.h>
34 #include <media/tvaudio.h>
35 #include <media/i2c-addr.h>
36 #include <media/tveeprom.h>
37 #include <media/v4l2-common.h>
38 #include <media/v4l2-chip-ident.h>
39
40 #include "em28xx.h"
41
42 #define DRIVER_NAME "em28xx"
43
44 static int tuner = -1;
45 module_param(tuner, int, 0444);
46 MODULE_PARM_DESC(tuner, "tuner type");
47
48 static unsigned int disable_ir;
49 module_param(disable_ir, int, 0444);
50 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
51
52 static unsigned int disable_usb_speed_check;
53 module_param(disable_usb_speed_check, int, 0444);
54 MODULE_PARM_DESC(disable_usb_speed_check,
55 "override min bandwidth requirement of 480M bps");
56
57 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
58 module_param_array(card, int, NULL, 0444);
59 MODULE_PARM_DESC(card, "card type");
60
61 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
62 static unsigned long em28xx_devused;
63
64 struct em28xx_hash_table {
65 unsigned long hash;
66 unsigned int model;
67 unsigned int tuner;
68 };
69
70 /*
71 * Reset sequences for analog/digital modes
72 */
73
74 /* Reset for the most [analog] boards */
75 static struct em28xx_reg_seq default_analog[] = {
76 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
77 { -1, -1, -1, -1},
78 };
79
80 /* Reset for the most [digital] boards */
81 static struct em28xx_reg_seq default_digital[] = {
82 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
83 { -1, -1, -1, -1},
84 };
85
86 /* Board Hauppauge WinTV HVR 900 analog */
87 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
88 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
89 {0x05, 0xff, 0x10, 10},
90 { -1, -1, -1, -1},
91 };
92
93 /* Board Hauppauge WinTV HVR 900 digital */
94 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
95 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
96 {EM2880_R04_GPO, 0x04, 0x0f, 10},
97 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
98 { -1, -1, -1, -1},
99 };
100
101 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
102 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
103 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
104 { -1, -1, -1, -1},
105 };
106
107 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
108
109 /* Board - EM2870 Kworld 355u
110 Analog - No input analog */
111
112 /* Board - EM2882 Kworld 315U digital */
113 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
114 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
115 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
116 {EM2880_R04_GPO, 0x04, 0xff, 10},
117 {EM2880_R04_GPO, 0x0c, 0xff, 10},
118 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
119 { -1, -1, -1, -1},
120 };
121
122 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
123 {EM2880_R04_GPO, 0x08, 0xff, 10},
124 {EM2880_R04_GPO, 0x0c, 0xff, 10},
125 {EM2880_R04_GPO, 0x08, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 { -1, -1, -1, -1},
128 };
129
130 static struct em28xx_reg_seq kworld_330u_analog[] = {
131 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
132 {EM2880_R04_GPO, 0x00, 0xff, 10},
133 { -1, -1, -1, -1},
134 };
135
136 static struct em28xx_reg_seq kworld_330u_digital[] = {
137 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
138 {EM2880_R04_GPO, 0x08, 0xff, 10},
139 { -1, -1, -1, -1},
140 };
141
142 /* Evga inDtube
143 GPIO0 - Enable digital power (s5h1409) - low to enable
144 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
145 GPIO4 - xc3028 reset
146 GOP3 - s5h1409 reset
147 */
148 static struct em28xx_reg_seq evga_indtube_analog[] = {
149 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
150 { -1, -1, -1, -1},
151 };
152
153 static struct em28xx_reg_seq evga_indtube_digital[] = {
154 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
155 {EM2880_R04_GPO, 0x04, 0xff, 10},
156 {EM2880_R04_GPO, 0x0c, 0xff, 1},
157 { -1, -1, -1, -1},
158 };
159
160 /* Pinnacle Hybrid Pro eb1a:2881 */
161 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
162 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
163 { -1, -1, -1, -1},
164 };
165
166 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
167 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
168 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
169 {EM2880_R04_GPO, 0x0c, 0xff, 1},
170 { -1, -1, -1, -1},
171 };
172
173
174 /* Callback for the most boards */
175 static struct em28xx_reg_seq default_tuner_gpio[] = {
176 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
177 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
178 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
179 { -1, -1, -1, -1},
180 };
181
182 /* Mute/unmute */
183 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
184 {EM28XX_R08_GPIO, 5, 7, 10},
185 { -1, -1, -1, -1},
186 };
187
188 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
189 {EM28XX_R08_GPIO, 4, 7, 10},
190 { -1, -1, -1, -1},
191 };
192
193 static struct em28xx_reg_seq compro_mute_gpio[] = {
194 {EM28XX_R08_GPIO, 6, 7, 10},
195 { -1, -1, -1, -1},
196 };
197
198 /* Terratec AV350 */
199 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
200 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
201 { -1, -1, -1, -1},
202 };
203
204 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
205 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
206 { -1, -1, -1, -1},
207 };
208
209 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
210 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
211 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
212 { -1, -1, -1, -1},
213 };
214
215 /*
216 * Board definitions
217 */
218 struct em28xx_board em28xx_boards[] = {
219 [EM2750_BOARD_UNKNOWN] = {
220 .name = "EM2710/EM2750/EM2751 webcam grabber",
221 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
222 .tuner_type = TUNER_ABSENT,
223 .is_webcam = 1,
224 .input = { {
225 .type = EM28XX_VMUX_COMPOSITE1,
226 .vmux = 0,
227 .amux = EM28XX_AMUX_VIDEO,
228 .gpio = silvercrest_reg_seq,
229 } },
230 },
231 [EM2800_BOARD_UNKNOWN] = {
232 .name = "Unknown EM2800 video grabber",
233 .is_em2800 = 1,
234 .tda9887_conf = TDA9887_PRESENT,
235 .decoder = EM28XX_SAA711X,
236 .tuner_type = TUNER_ABSENT,
237 .input = { {
238 .type = EM28XX_VMUX_COMPOSITE1,
239 .vmux = SAA7115_COMPOSITE0,
240 .amux = EM28XX_AMUX_LINE_IN,
241 }, {
242 .type = EM28XX_VMUX_SVIDEO,
243 .vmux = SAA7115_SVIDEO3,
244 .amux = EM28XX_AMUX_LINE_IN,
245 } },
246 },
247 [EM2820_BOARD_UNKNOWN] = {
248 .name = "Unknown EM2750/28xx video grabber",
249 .tuner_type = TUNER_ABSENT,
250 .is_webcam = 1, /* To enable sensor probe */
251 },
252 [EM2750_BOARD_DLCW_130] = {
253 /* Beijing Huaqi Information Digital Technology Co., Ltd */
254 .name = "Huaqi DLCW-130",
255 .valid = EM28XX_BOARD_NOT_VALIDATED,
256 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
257 .tuner_type = TUNER_ABSENT,
258 .is_webcam = 1,
259 .input = { {
260 .type = EM28XX_VMUX_COMPOSITE1,
261 .vmux = 0,
262 .amux = EM28XX_AMUX_VIDEO,
263 } },
264 },
265 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
266 .name = "Kworld PVR TV 2800 RF",
267 .tuner_type = TUNER_TEMIC_PAL,
268 .tda9887_conf = TDA9887_PRESENT,
269 .decoder = EM28XX_SAA711X,
270 .input = { {
271 .type = EM28XX_VMUX_COMPOSITE1,
272 .vmux = SAA7115_COMPOSITE0,
273 .amux = EM28XX_AMUX_LINE_IN,
274 }, {
275 .type = EM28XX_VMUX_SVIDEO,
276 .vmux = SAA7115_SVIDEO3,
277 .amux = EM28XX_AMUX_LINE_IN,
278 } },
279 },
280 [EM2820_BOARD_GADMEI_TVR200] = {
281 .name = "Gadmei TVR200",
282 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
283 .tda9887_conf = TDA9887_PRESENT,
284 .decoder = EM28XX_SAA711X,
285 .input = { {
286 .type = EM28XX_VMUX_TELEVISION,
287 .vmux = SAA7115_COMPOSITE2,
288 .amux = EM28XX_AMUX_LINE_IN,
289 }, {
290 .type = EM28XX_VMUX_COMPOSITE1,
291 .vmux = SAA7115_COMPOSITE0,
292 .amux = EM28XX_AMUX_LINE_IN,
293 }, {
294 .type = EM28XX_VMUX_SVIDEO,
295 .vmux = SAA7115_SVIDEO3,
296 .amux = EM28XX_AMUX_LINE_IN,
297 } },
298 },
299 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
300 .name = "Terratec Cinergy 250 USB",
301 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
302 .tda9887_conf = TDA9887_PRESENT,
303 .decoder = EM28XX_SAA711X,
304 .input = { {
305 .type = EM28XX_VMUX_TELEVISION,
306 .vmux = SAA7115_COMPOSITE2,
307 .amux = EM28XX_AMUX_LINE_IN,
308 }, {
309 .type = EM28XX_VMUX_COMPOSITE1,
310 .vmux = SAA7115_COMPOSITE0,
311 .amux = EM28XX_AMUX_LINE_IN,
312 }, {
313 .type = EM28XX_VMUX_SVIDEO,
314 .vmux = SAA7115_SVIDEO3,
315 .amux = EM28XX_AMUX_LINE_IN,
316 } },
317 },
318 [EM2820_BOARD_PINNACLE_USB_2] = {
319 .name = "Pinnacle PCTV USB 2",
320 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
321 .tda9887_conf = TDA9887_PRESENT,
322 .decoder = EM28XX_SAA711X,
323 .input = { {
324 .type = EM28XX_VMUX_TELEVISION,
325 .vmux = SAA7115_COMPOSITE2,
326 .amux = EM28XX_AMUX_VIDEO,
327 }, {
328 .type = EM28XX_VMUX_COMPOSITE1,
329 .vmux = SAA7115_COMPOSITE0,
330 .amux = EM28XX_AMUX_LINE_IN,
331 }, {
332 .type = EM28XX_VMUX_SVIDEO,
333 .vmux = SAA7115_SVIDEO3,
334 .amux = EM28XX_AMUX_LINE_IN,
335 } },
336 },
337 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
338 .name = "Hauppauge WinTV USB 2",
339 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
340 .tda9887_conf = TDA9887_PRESENT |
341 TDA9887_PORT1_ACTIVE |
342 TDA9887_PORT2_ACTIVE,
343 .decoder = EM28XX_TVP5150,
344 .has_msp34xx = 1,
345 .input = { {
346 .type = EM28XX_VMUX_TELEVISION,
347 .vmux = TVP5150_COMPOSITE0,
348 .amux = MSP_INPUT_DEFAULT,
349 }, {
350 .type = EM28XX_VMUX_SVIDEO,
351 .vmux = TVP5150_SVIDEO,
352 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
353 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
354 } },
355 },
356 [EM2820_BOARD_DLINK_USB_TV] = {
357 .name = "D-Link DUB-T210 TV Tuner",
358 .valid = EM28XX_BOARD_NOT_VALIDATED,
359 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
360 .tda9887_conf = TDA9887_PRESENT,
361 .decoder = EM28XX_SAA711X,
362 .input = { {
363 .type = EM28XX_VMUX_TELEVISION,
364 .vmux = SAA7115_COMPOSITE2,
365 .amux = EM28XX_AMUX_LINE_IN,
366 }, {
367 .type = EM28XX_VMUX_COMPOSITE1,
368 .vmux = SAA7115_COMPOSITE0,
369 .amux = EM28XX_AMUX_LINE_IN,
370 }, {
371 .type = EM28XX_VMUX_SVIDEO,
372 .vmux = SAA7115_SVIDEO3,
373 .amux = EM28XX_AMUX_LINE_IN,
374 } },
375 },
376 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
377 .name = "Hercules Smart TV USB 2.0",
378 .valid = EM28XX_BOARD_NOT_VALIDATED,
379 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
380 .tda9887_conf = TDA9887_PRESENT,
381 .decoder = EM28XX_SAA711X,
382 .input = { {
383 .type = EM28XX_VMUX_TELEVISION,
384 .vmux = SAA7115_COMPOSITE2,
385 .amux = EM28XX_AMUX_LINE_IN,
386 }, {
387 .type = EM28XX_VMUX_COMPOSITE1,
388 .vmux = SAA7115_COMPOSITE0,
389 .amux = EM28XX_AMUX_LINE_IN,
390 }, {
391 .type = EM28XX_VMUX_SVIDEO,
392 .vmux = SAA7115_SVIDEO3,
393 .amux = EM28XX_AMUX_LINE_IN,
394 } },
395 },
396 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
397 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
398 .valid = EM28XX_BOARD_NOT_VALIDATED,
399 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
400 .tda9887_conf = TDA9887_PRESENT,
401 .decoder = EM28XX_SAA711X,
402 .input = { {
403 .type = EM28XX_VMUX_TELEVISION,
404 .vmux = SAA7115_COMPOSITE2,
405 .amux = EM28XX_AMUX_VIDEO,
406 }, {
407 .type = EM28XX_VMUX_COMPOSITE1,
408 .vmux = SAA7115_COMPOSITE0,
409 .amux = EM28XX_AMUX_LINE_IN,
410 }, {
411 .type = EM28XX_VMUX_SVIDEO,
412 .vmux = SAA7115_SVIDEO3,
413 .amux = EM28XX_AMUX_LINE_IN,
414 } },
415 },
416 [EM2820_BOARD_GADMEI_UTV310] = {
417 .name = "Gadmei UTV310",
418 .valid = EM28XX_BOARD_NOT_VALIDATED,
419 .tuner_type = TUNER_TNF_5335MF,
420 .tda9887_conf = TDA9887_PRESENT,
421 .decoder = EM28XX_SAA711X,
422 .input = { {
423 .type = EM28XX_VMUX_TELEVISION,
424 .vmux = SAA7115_COMPOSITE1,
425 .amux = EM28XX_AMUX_LINE_IN,
426 }, {
427 .type = EM28XX_VMUX_COMPOSITE1,
428 .vmux = SAA7115_COMPOSITE0,
429 .amux = EM28XX_AMUX_LINE_IN,
430 }, {
431 .type = EM28XX_VMUX_SVIDEO,
432 .vmux = SAA7115_SVIDEO3,
433 .amux = EM28XX_AMUX_LINE_IN,
434 } },
435 },
436 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
437 .name = "Leadtek Winfast USB II Deluxe",
438 .valid = EM28XX_BOARD_NOT_VALIDATED,
439 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
440 .tda9887_conf = TDA9887_PRESENT,
441 .decoder = EM28XX_SAA711X,
442 .input = { {
443 .type = EM28XX_VMUX_TELEVISION,
444 .vmux = SAA7115_COMPOSITE2,
445 .amux = EM28XX_AMUX_VIDEO,
446 }, {
447 .type = EM28XX_VMUX_COMPOSITE1,
448 .vmux = SAA7115_COMPOSITE0,
449 .amux = EM28XX_AMUX_LINE_IN,
450 }, {
451 .type = EM28XX_VMUX_SVIDEO,
452 .vmux = SAA7115_COMPOSITE0,
453 .amux = EM28XX_AMUX_LINE_IN,
454 } },
455 },
456 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
457 .name = "Videology 20K14XUSB USB2.0",
458 .valid = EM28XX_BOARD_NOT_VALIDATED,
459 .tuner_type = TUNER_ABSENT,
460 .is_webcam = 1,
461 .input = { {
462 .type = EM28XX_VMUX_COMPOSITE1,
463 .vmux = 0,
464 .amux = EM28XX_AMUX_VIDEO,
465 } },
466 },
467 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
468 .name = "Silvercrest Webcam 1.3mpix",
469 .tuner_type = TUNER_ABSENT,
470 .is_webcam = 1,
471 .input = { {
472 .type = EM28XX_VMUX_COMPOSITE1,
473 .vmux = 0,
474 .amux = EM28XX_AMUX_VIDEO,
475 .gpio = silvercrest_reg_seq,
476 } },
477 },
478 [EM2821_BOARD_SUPERCOMP_USB_2] = {
479 .name = "Supercomp USB 2.0 TV",
480 .valid = EM28XX_BOARD_NOT_VALIDATED,
481 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
482 .tda9887_conf = TDA9887_PRESENT |
483 TDA9887_PORT1_ACTIVE |
484 TDA9887_PORT2_ACTIVE,
485 .decoder = EM28XX_SAA711X,
486 .input = { {
487 .type = EM28XX_VMUX_TELEVISION,
488 .vmux = SAA7115_COMPOSITE2,
489 .amux = EM28XX_AMUX_LINE_IN,
490 }, {
491 .type = EM28XX_VMUX_COMPOSITE1,
492 .vmux = SAA7115_COMPOSITE0,
493 .amux = EM28XX_AMUX_VIDEO,
494 }, {
495 .type = EM28XX_VMUX_SVIDEO,
496 .vmux = SAA7115_SVIDEO3,
497 .amux = EM28XX_AMUX_LINE_IN,
498 } },
499 },
500 [EM2821_BOARD_USBGEAR_VD204] = {
501 .name = "Usbgear VD204v9",
502 .valid = EM28XX_BOARD_NOT_VALIDATED,
503 .tuner_type = TUNER_ABSENT, /* Capture only device */
504 .decoder = EM28XX_SAA711X,
505 .input = { {
506 .type = EM28XX_VMUX_COMPOSITE1,
507 .vmux = SAA7115_COMPOSITE0,
508 .amux = EM28XX_AMUX_LINE_IN,
509 }, {
510 .type = EM28XX_VMUX_SVIDEO,
511 .vmux = SAA7115_SVIDEO3,
512 .amux = EM28XX_AMUX_LINE_IN,
513 } },
514 },
515 [EM2860_BOARD_NETGMBH_CAM] = {
516 /* Beijing Huaqi Information Digital Technology Co., Ltd */
517 .name = "NetGMBH Cam",
518 .valid = EM28XX_BOARD_NOT_VALIDATED,
519 .tuner_type = TUNER_ABSENT,
520 .is_webcam = 1,
521 .input = { {
522 .type = EM28XX_VMUX_COMPOSITE1,
523 .vmux = 0,
524 .amux = EM28XX_AMUX_VIDEO,
525 } },
526 },
527 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
528 .name = "Typhoon DVD Maker",
529 .decoder = EM28XX_SAA711X,
530 .tuner_type = TUNER_ABSENT, /* Capture only device */
531 .input = { {
532 .type = EM28XX_VMUX_COMPOSITE1,
533 .vmux = SAA7115_COMPOSITE0,
534 .amux = EM28XX_AMUX_LINE_IN,
535 }, {
536 .type = EM28XX_VMUX_SVIDEO,
537 .vmux = SAA7115_SVIDEO3,
538 .amux = EM28XX_AMUX_LINE_IN,
539 } },
540 },
541 [EM2860_BOARD_GADMEI_UTV330] = {
542 .name = "Gadmei UTV330",
543 .valid = EM28XX_BOARD_NOT_VALIDATED,
544 .tuner_type = TUNER_TNF_5335MF,
545 .tda9887_conf = TDA9887_PRESENT,
546 .decoder = EM28XX_SAA711X,
547 .input = { {
548 .type = EM28XX_VMUX_TELEVISION,
549 .vmux = SAA7115_COMPOSITE2,
550 .amux = EM28XX_AMUX_VIDEO,
551 }, {
552 .type = EM28XX_VMUX_COMPOSITE1,
553 .vmux = SAA7115_COMPOSITE0,
554 .amux = EM28XX_AMUX_LINE_IN,
555 }, {
556 .type = EM28XX_VMUX_SVIDEO,
557 .vmux = SAA7115_SVIDEO3,
558 .amux = EM28XX_AMUX_LINE_IN,
559 } },
560 },
561 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
562 .name = "Terratec Cinergy A Hybrid XS",
563 .valid = EM28XX_BOARD_NOT_VALIDATED,
564 .tuner_type = TUNER_XC2028,
565 .tuner_gpio = default_tuner_gpio,
566 .decoder = EM28XX_TVP5150,
567
568 .input = { {
569 .type = EM28XX_VMUX_TELEVISION,
570 .vmux = TVP5150_COMPOSITE0,
571 .amux = EM28XX_AMUX_VIDEO,
572 .gpio = hauppauge_wintv_hvr_900_analog,
573 }, {
574 .type = EM28XX_VMUX_COMPOSITE1,
575 .vmux = TVP5150_COMPOSITE1,
576 .amux = EM28XX_AMUX_LINE_IN,
577 .gpio = hauppauge_wintv_hvr_900_analog,
578 }, {
579 .type = EM28XX_VMUX_SVIDEO,
580 .vmux = TVP5150_SVIDEO,
581 .amux = EM28XX_AMUX_LINE_IN,
582 .gpio = hauppauge_wintv_hvr_900_analog,
583 } },
584 },
585 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
586 .name = "KWorld PVRTV 300U",
587 .valid = EM28XX_BOARD_NOT_VALIDATED,
588 .tuner_type = TUNER_XC2028,
589 .tuner_gpio = default_tuner_gpio,
590 .decoder = EM28XX_TVP5150,
591 .input = { {
592 .type = EM28XX_VMUX_TELEVISION,
593 .vmux = TVP5150_COMPOSITE0,
594 .amux = EM28XX_AMUX_VIDEO,
595 }, {
596 .type = EM28XX_VMUX_COMPOSITE1,
597 .vmux = TVP5150_COMPOSITE1,
598 .amux = EM28XX_AMUX_LINE_IN,
599 }, {
600 .type = EM28XX_VMUX_SVIDEO,
601 .vmux = TVP5150_SVIDEO,
602 .amux = EM28XX_AMUX_LINE_IN,
603 } },
604 },
605 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
606 .name = "Yakumo MovieMixer",
607 .tuner_type = TUNER_ABSENT, /* Capture only device */
608 .decoder = EM28XX_TVP5150,
609 .input = { {
610 .type = EM28XX_VMUX_TELEVISION,
611 .vmux = TVP5150_COMPOSITE0,
612 .amux = EM28XX_AMUX_VIDEO,
613 }, {
614 .type = EM28XX_VMUX_COMPOSITE1,
615 .vmux = TVP5150_COMPOSITE1,
616 .amux = EM28XX_AMUX_LINE_IN,
617 }, {
618 .type = EM28XX_VMUX_SVIDEO,
619 .vmux = TVP5150_SVIDEO,
620 .amux = EM28XX_AMUX_LINE_IN,
621 } },
622 },
623 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
624 .name = "Plextor ConvertX PX-TV100U",
625 .tuner_type = TUNER_TNF_5335MF,
626 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
627 EM28XX_XCLK_FREQUENCY_12MHZ,
628 .tda9887_conf = TDA9887_PRESENT,
629 .decoder = EM28XX_TVP5150,
630 .has_msp34xx = 1,
631 .input = { {
632 .type = EM28XX_VMUX_TELEVISION,
633 .vmux = TVP5150_COMPOSITE0,
634 .amux = EM28XX_AMUX_LINE_IN,
635 .gpio = pinnacle_hybrid_pro_analog,
636 }, {
637 .type = EM28XX_VMUX_COMPOSITE1,
638 .vmux = TVP5150_COMPOSITE1,
639 .amux = EM28XX_AMUX_LINE_IN,
640 .gpio = pinnacle_hybrid_pro_analog,
641 }, {
642 .type = EM28XX_VMUX_SVIDEO,
643 .vmux = TVP5150_SVIDEO,
644 .amux = EM28XX_AMUX_LINE_IN,
645 .gpio = pinnacle_hybrid_pro_analog,
646 } },
647 },
648
649 /* Those boards with em2870 are DVB Only*/
650
651 [EM2870_BOARD_TERRATEC_XS] = {
652 .name = "Terratec Cinergy T XS",
653 .valid = EM28XX_BOARD_NOT_VALIDATED,
654 .tuner_type = TUNER_XC2028,
655 .tuner_gpio = default_tuner_gpio,
656 },
657 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
658 .name = "Terratec Cinergy T XS (MT2060)",
659 .valid = EM28XX_BOARD_NOT_VALIDATED,
660 .tuner_type = TUNER_ABSENT, /* MT2060 */
661 },
662 [EM2870_BOARD_KWORLD_350U] = {
663 .name = "Kworld 350 U DVB-T",
664 .valid = EM28XX_BOARD_NOT_VALIDATED,
665 .tuner_type = TUNER_XC2028,
666 .tuner_gpio = default_tuner_gpio,
667 },
668 [EM2870_BOARD_KWORLD_355U] = {
669 .name = "Kworld 355 U DVB-T",
670 .valid = EM28XX_BOARD_NOT_VALIDATED,
671 },
672 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
673 .name = "Pinnacle PCTV DVB-T",
674 .valid = EM28XX_BOARD_NOT_VALIDATED,
675 .tuner_type = TUNER_ABSENT, /* MT2060 */
676 /* djh - I have serious doubts this is right... */
677 .xclk = EM28XX_XCLK_IR_RC5_MODE |
678 EM28XX_XCLK_FREQUENCY_10MHZ,
679 },
680 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
681 .name = "Compro, VideoMate U3",
682 .valid = EM28XX_BOARD_NOT_VALIDATED,
683 .tuner_type = TUNER_ABSENT, /* MT2060 */
684 },
685
686 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
687 .name = "Terratec Hybrid XS Secam",
688 .valid = EM28XX_BOARD_NOT_VALIDATED,
689 .has_msp34xx = 1,
690 .tuner_type = TUNER_XC2028,
691 .tuner_gpio = default_tuner_gpio,
692 .decoder = EM28XX_TVP5150,
693 .input = { {
694 .type = EM28XX_VMUX_TELEVISION,
695 .vmux = TVP5150_COMPOSITE0,
696 .amux = EM28XX_AMUX_VIDEO,
697 .gpio = default_analog,
698 }, {
699 .type = EM28XX_VMUX_COMPOSITE1,
700 .vmux = TVP5150_COMPOSITE1,
701 .amux = EM28XX_AMUX_LINE_IN,
702 .gpio = default_analog,
703 }, {
704 .type = EM28XX_VMUX_SVIDEO,
705 .vmux = TVP5150_SVIDEO,
706 .amux = EM28XX_AMUX_LINE_IN,
707 .gpio = default_analog,
708 } },
709 },
710 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
711 .name = "Hauppauge WinTV HVR 900",
712 .tda9887_conf = TDA9887_PRESENT,
713 .tuner_type = TUNER_XC2028,
714 .tuner_gpio = default_tuner_gpio,
715 .mts_firmware = 1,
716 .has_dvb = 1,
717 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
718 .ir_codes = ir_codes_hauppauge_new,
719 .decoder = EM28XX_TVP5150,
720 .input = { {
721 .type = EM28XX_VMUX_TELEVISION,
722 .vmux = TVP5150_COMPOSITE0,
723 .amux = EM28XX_AMUX_VIDEO,
724 .gpio = hauppauge_wintv_hvr_900_analog,
725 }, {
726 .type = EM28XX_VMUX_COMPOSITE1,
727 .vmux = TVP5150_COMPOSITE1,
728 .amux = EM28XX_AMUX_LINE_IN,
729 .gpio = hauppauge_wintv_hvr_900_analog,
730 }, {
731 .type = EM28XX_VMUX_SVIDEO,
732 .vmux = TVP5150_SVIDEO,
733 .amux = EM28XX_AMUX_LINE_IN,
734 .gpio = hauppauge_wintv_hvr_900_analog,
735 } },
736 },
737 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
738 .name = "Hauppauge WinTV HVR 900 (R2)",
739 .tda9887_conf = TDA9887_PRESENT,
740 .tuner_type = TUNER_XC2028,
741 .tuner_gpio = default_tuner_gpio,
742 .mts_firmware = 1,
743 .ir_codes = ir_codes_hauppauge_new,
744 .decoder = EM28XX_TVP5150,
745 .input = { {
746 .type = EM28XX_VMUX_TELEVISION,
747 .vmux = TVP5150_COMPOSITE0,
748 .amux = EM28XX_AMUX_VIDEO,
749 .gpio = hauppauge_wintv_hvr_900_analog,
750 }, {
751 .type = EM28XX_VMUX_COMPOSITE1,
752 .vmux = TVP5150_COMPOSITE1,
753 .amux = EM28XX_AMUX_LINE_IN,
754 .gpio = hauppauge_wintv_hvr_900_analog,
755 }, {
756 .type = EM28XX_VMUX_SVIDEO,
757 .vmux = TVP5150_SVIDEO,
758 .amux = EM28XX_AMUX_LINE_IN,
759 .gpio = hauppauge_wintv_hvr_900_analog,
760 } },
761 },
762 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
763 .name = "Hauppauge WinTV HVR 850",
764 .tuner_type = TUNER_XC2028,
765 .tuner_gpio = default_tuner_gpio,
766 .mts_firmware = 1,
767 .has_dvb = 1,
768 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
769 .ir_codes = ir_codes_hauppauge_new,
770 .decoder = EM28XX_TVP5150,
771 .input = { {
772 .type = EM28XX_VMUX_TELEVISION,
773 .vmux = TVP5150_COMPOSITE0,
774 .amux = EM28XX_AMUX_VIDEO,
775 .gpio = hauppauge_wintv_hvr_900_analog,
776 }, {
777 .type = EM28XX_VMUX_COMPOSITE1,
778 .vmux = TVP5150_COMPOSITE1,
779 .amux = EM28XX_AMUX_LINE_IN,
780 .gpio = hauppauge_wintv_hvr_900_analog,
781 }, {
782 .type = EM28XX_VMUX_SVIDEO,
783 .vmux = TVP5150_SVIDEO,
784 .amux = EM28XX_AMUX_LINE_IN,
785 .gpio = hauppauge_wintv_hvr_900_analog,
786 } },
787 },
788 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
789 .name = "Hauppauge WinTV HVR 950",
790 .tuner_type = TUNER_XC2028,
791 .tuner_gpio = default_tuner_gpio,
792 .mts_firmware = 1,
793 .has_dvb = 1,
794 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
795 .ir_codes = ir_codes_hauppauge_new,
796 .decoder = EM28XX_TVP5150,
797 .input = { {
798 .type = EM28XX_VMUX_TELEVISION,
799 .vmux = TVP5150_COMPOSITE0,
800 .amux = EM28XX_AMUX_VIDEO,
801 .gpio = hauppauge_wintv_hvr_900_analog,
802 }, {
803 .type = EM28XX_VMUX_COMPOSITE1,
804 .vmux = TVP5150_COMPOSITE1,
805 .amux = EM28XX_AMUX_LINE_IN,
806 .gpio = hauppauge_wintv_hvr_900_analog,
807 }, {
808 .type = EM28XX_VMUX_SVIDEO,
809 .vmux = TVP5150_SVIDEO,
810 .amux = EM28XX_AMUX_LINE_IN,
811 .gpio = hauppauge_wintv_hvr_900_analog,
812 } },
813 },
814 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
815 .name = "Pinnacle PCTV HD Pro Stick",
816 .tuner_type = TUNER_XC2028,
817 .tuner_gpio = default_tuner_gpio,
818 .mts_firmware = 1,
819 .has_dvb = 1,
820 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
821 .ir_codes = ir_codes_pinnacle_pctv_hd,
822 .decoder = EM28XX_TVP5150,
823 .input = { {
824 .type = EM28XX_VMUX_TELEVISION,
825 .vmux = TVP5150_COMPOSITE0,
826 .amux = EM28XX_AMUX_VIDEO,
827 .gpio = hauppauge_wintv_hvr_900_analog,
828 }, {
829 .type = EM28XX_VMUX_COMPOSITE1,
830 .vmux = TVP5150_COMPOSITE1,
831 .amux = EM28XX_AMUX_LINE_IN,
832 .gpio = hauppauge_wintv_hvr_900_analog,
833 }, {
834 .type = EM28XX_VMUX_SVIDEO,
835 .vmux = TVP5150_SVIDEO,
836 .amux = EM28XX_AMUX_LINE_IN,
837 .gpio = hauppauge_wintv_hvr_900_analog,
838 } },
839 },
840 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
841 .name = "AMD ATI TV Wonder HD 600",
842 .tuner_type = TUNER_XC2028,
843 .tuner_gpio = default_tuner_gpio,
844 .mts_firmware = 1,
845 .has_dvb = 1,
846 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
847 .ir_codes = ir_codes_ati_tv_wonder_hd_600,
848 .decoder = EM28XX_TVP5150,
849 .input = { {
850 .type = EM28XX_VMUX_TELEVISION,
851 .vmux = TVP5150_COMPOSITE0,
852 .amux = EM28XX_AMUX_VIDEO,
853 .gpio = hauppauge_wintv_hvr_900_analog,
854 }, {
855 .type = EM28XX_VMUX_COMPOSITE1,
856 .vmux = TVP5150_COMPOSITE1,
857 .amux = EM28XX_AMUX_LINE_IN,
858 .gpio = hauppauge_wintv_hvr_900_analog,
859 }, {
860 .type = EM28XX_VMUX_SVIDEO,
861 .vmux = TVP5150_SVIDEO,
862 .amux = EM28XX_AMUX_LINE_IN,
863 .gpio = hauppauge_wintv_hvr_900_analog,
864 } },
865 },
866 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
867 .name = "Terratec Hybrid XS",
868 .tuner_type = TUNER_XC2028,
869 .tuner_gpio = default_tuner_gpio,
870 .decoder = EM28XX_TVP5150,
871 .has_dvb = 1,
872 .dvb_gpio = default_digital,
873 .input = { {
874 .type = EM28XX_VMUX_TELEVISION,
875 .vmux = TVP5150_COMPOSITE0,
876 .amux = EM28XX_AMUX_VIDEO,
877 .gpio = default_analog,
878 }, {
879 .type = EM28XX_VMUX_COMPOSITE1,
880 .vmux = TVP5150_COMPOSITE1,
881 .amux = EM28XX_AMUX_LINE_IN,
882 .gpio = default_analog,
883 }, {
884 .type = EM28XX_VMUX_SVIDEO,
885 .vmux = TVP5150_SVIDEO,
886 .amux = EM28XX_AMUX_LINE_IN,
887 .gpio = default_analog,
888 } },
889 },
890 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
891 as Prodigy XS with a different PID, let's keep it separated for now
892 maybe we'll need it lateron */
893 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
894 .name = "Terratec Prodigy XS",
895 .tuner_type = TUNER_XC2028,
896 .tuner_gpio = default_tuner_gpio,
897 .decoder = EM28XX_TVP5150,
898 .input = { {
899 .type = EM28XX_VMUX_TELEVISION,
900 .vmux = TVP5150_COMPOSITE0,
901 .amux = EM28XX_AMUX_VIDEO,
902 .gpio = hauppauge_wintv_hvr_900_analog,
903 }, {
904 .type = EM28XX_VMUX_COMPOSITE1,
905 .vmux = TVP5150_COMPOSITE1,
906 .amux = EM28XX_AMUX_LINE_IN,
907 .gpio = hauppauge_wintv_hvr_900_analog,
908 }, {
909 .type = EM28XX_VMUX_SVIDEO,
910 .vmux = TVP5150_SVIDEO,
911 .amux = EM28XX_AMUX_LINE_IN,
912 .gpio = hauppauge_wintv_hvr_900_analog,
913 } },
914 },
915 [EM2820_BOARD_MSI_VOX_USB_2] = {
916 .name = "MSI VOX USB 2.0",
917 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
918 .tda9887_conf = TDA9887_PRESENT |
919 TDA9887_PORT1_ACTIVE |
920 TDA9887_PORT2_ACTIVE,
921 .max_range_640_480 = 1,
922 .decoder = EM28XX_SAA711X,
923 .input = { {
924 .type = EM28XX_VMUX_TELEVISION,
925 .vmux = SAA7115_COMPOSITE4,
926 .amux = EM28XX_AMUX_VIDEO,
927 }, {
928 .type = EM28XX_VMUX_COMPOSITE1,
929 .vmux = SAA7115_COMPOSITE0,
930 .amux = EM28XX_AMUX_LINE_IN,
931 }, {
932 .type = EM28XX_VMUX_SVIDEO,
933 .vmux = SAA7115_SVIDEO3,
934 .amux = EM28XX_AMUX_LINE_IN,
935 } },
936 },
937 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
938 .name = "Terratec Cinergy 200 USB",
939 .is_em2800 = 1,
940 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
941 .tda9887_conf = TDA9887_PRESENT,
942 .decoder = EM28XX_SAA711X,
943 .input = { {
944 .type = EM28XX_VMUX_TELEVISION,
945 .vmux = SAA7115_COMPOSITE2,
946 .amux = EM28XX_AMUX_VIDEO,
947 }, {
948 .type = EM28XX_VMUX_COMPOSITE1,
949 .vmux = SAA7115_COMPOSITE0,
950 .amux = EM28XX_AMUX_LINE_IN,
951 }, {
952 .type = EM28XX_VMUX_SVIDEO,
953 .vmux = SAA7115_SVIDEO3,
954 .amux = EM28XX_AMUX_LINE_IN,
955 } },
956 },
957 [EM2800_BOARD_GRABBEEX_USB2800] = {
958 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
959 .is_em2800 = 1,
960 .decoder = EM28XX_SAA711X,
961 .tuner_type = TUNER_ABSENT, /* capture only board */
962 .input = { {
963 .type = EM28XX_VMUX_COMPOSITE1,
964 .vmux = SAA7115_COMPOSITE0,
965 .amux = EM28XX_AMUX_LINE_IN,
966 }, {
967 .type = EM28XX_VMUX_SVIDEO,
968 .vmux = SAA7115_SVIDEO3,
969 .amux = EM28XX_AMUX_LINE_IN,
970 } },
971 },
972 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
973 .name = "Leadtek Winfast USB II",
974 .is_em2800 = 1,
975 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
976 .tda9887_conf = TDA9887_PRESENT,
977 .decoder = EM28XX_SAA711X,
978 .input = { {
979 .type = EM28XX_VMUX_TELEVISION,
980 .vmux = SAA7115_COMPOSITE2,
981 .amux = EM28XX_AMUX_VIDEO,
982 }, {
983 .type = EM28XX_VMUX_COMPOSITE1,
984 .vmux = SAA7115_COMPOSITE0,
985 .amux = EM28XX_AMUX_LINE_IN,
986 }, {
987 .type = EM28XX_VMUX_SVIDEO,
988 .vmux = SAA7115_SVIDEO3,
989 .amux = EM28XX_AMUX_LINE_IN,
990 } },
991 },
992 [EM2800_BOARD_KWORLD_USB2800] = {
993 .name = "Kworld USB2800",
994 .is_em2800 = 1,
995 .tuner_type = TUNER_PHILIPS_FCV1236D,
996 .tda9887_conf = TDA9887_PRESENT,
997 .decoder = EM28XX_SAA711X,
998 .input = { {
999 .type = EM28XX_VMUX_TELEVISION,
1000 .vmux = SAA7115_COMPOSITE2,
1001 .amux = EM28XX_AMUX_VIDEO,
1002 }, {
1003 .type = EM28XX_VMUX_COMPOSITE1,
1004 .vmux = SAA7115_COMPOSITE0,
1005 .amux = EM28XX_AMUX_LINE_IN,
1006 }, {
1007 .type = EM28XX_VMUX_SVIDEO,
1008 .vmux = SAA7115_SVIDEO3,
1009 .amux = EM28XX_AMUX_LINE_IN,
1010 } },
1011 },
1012 [EM2820_BOARD_PINNACLE_DVC_90] = {
1013 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker",
1014 .tuner_type = TUNER_ABSENT, /* capture only board */
1015 .decoder = EM28XX_SAA711X,
1016 .input = { {
1017 .type = EM28XX_VMUX_COMPOSITE1,
1018 .vmux = SAA7115_COMPOSITE0,
1019 .amux = EM28XX_AMUX_LINE_IN,
1020 }, {
1021 .type = EM28XX_VMUX_SVIDEO,
1022 .vmux = SAA7115_SVIDEO3,
1023 .amux = EM28XX_AMUX_LINE_IN,
1024 } },
1025 },
1026 [EM2800_BOARD_VGEAR_POCKETTV] = {
1027 .name = "V-Gear PocketTV",
1028 .is_em2800 = 1,
1029 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1030 .tda9887_conf = TDA9887_PRESENT,
1031 .decoder = EM28XX_SAA711X,
1032 .input = { {
1033 .type = EM28XX_VMUX_TELEVISION,
1034 .vmux = SAA7115_COMPOSITE2,
1035 .amux = EM28XX_AMUX_VIDEO,
1036 }, {
1037 .type = EM28XX_VMUX_COMPOSITE1,
1038 .vmux = SAA7115_COMPOSITE0,
1039 .amux = EM28XX_AMUX_LINE_IN,
1040 }, {
1041 .type = EM28XX_VMUX_SVIDEO,
1042 .vmux = SAA7115_SVIDEO3,
1043 .amux = EM28XX_AMUX_LINE_IN,
1044 } },
1045 },
1046 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1047 .name = "Pixelview PlayTV Box 4 USB 2.0",
1048 .tda9887_conf = TDA9887_PRESENT,
1049 .tuner_type = TUNER_YMEC_TVF_5533MF,
1050 .decoder = EM28XX_SAA711X,
1051 .input = { {
1052 .type = EM28XX_VMUX_TELEVISION,
1053 .vmux = SAA7115_COMPOSITE2,
1054 .amux = EM28XX_AMUX_VIDEO,
1055 .aout = EM28XX_AOUT_MONO | /* I2S */
1056 EM28XX_AOUT_MASTER, /* Line out pin */
1057 }, {
1058 .type = EM28XX_VMUX_COMPOSITE1,
1059 .vmux = SAA7115_COMPOSITE0,
1060 .amux = EM28XX_AMUX_LINE_IN,
1061 }, {
1062 .type = EM28XX_VMUX_SVIDEO,
1063 .vmux = SAA7115_SVIDEO3,
1064 .amux = EM28XX_AMUX_LINE_IN,
1065 } },
1066 },
1067 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1068 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1069 .has_snapshot_button = 1,
1070 .tda9887_conf = TDA9887_PRESENT,
1071 .tuner_type = TUNER_YMEC_TVF_5533MF,
1072 .decoder = EM28XX_SAA711X,
1073 .input = { {
1074 .type = EM28XX_VMUX_TELEVISION,
1075 .vmux = SAA7115_COMPOSITE2,
1076 .amux = EM28XX_AMUX_VIDEO,
1077 .aout = EM28XX_AOUT_MONO | /* I2S */
1078 EM28XX_AOUT_MASTER, /* Line out pin */
1079 }, {
1080 .type = EM28XX_VMUX_COMPOSITE1,
1081 .vmux = SAA7115_COMPOSITE0,
1082 .amux = EM28XX_AMUX_LINE_IN,
1083 }, {
1084 .type = EM28XX_VMUX_SVIDEO,
1085 .vmux = SAA7115_SVIDEO3,
1086 .amux = EM28XX_AMUX_LINE_IN,
1087 } },
1088 },
1089 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1090 .name = "EM2860/SAA711X Reference Design",
1091 .has_snapshot_button = 1,
1092 .tuner_type = TUNER_ABSENT,
1093 .decoder = EM28XX_SAA711X,
1094 .input = { {
1095 .type = EM28XX_VMUX_SVIDEO,
1096 .vmux = SAA7115_SVIDEO3,
1097 }, {
1098 .type = EM28XX_VMUX_COMPOSITE1,
1099 .vmux = SAA7115_COMPOSITE0,
1100 } },
1101 },
1102 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1103 .name = "MSI DigiVox A/D",
1104 .valid = EM28XX_BOARD_NOT_VALIDATED,
1105 .tuner_type = TUNER_XC2028,
1106 .tuner_gpio = default_tuner_gpio,
1107 .decoder = EM28XX_TVP5150,
1108 .input = { {
1109 .type = EM28XX_VMUX_TELEVISION,
1110 .vmux = TVP5150_COMPOSITE0,
1111 .amux = EM28XX_AMUX_VIDEO,
1112 .gpio = em2880_msi_digivox_ad_analog,
1113 }, {
1114 .type = EM28XX_VMUX_COMPOSITE1,
1115 .vmux = TVP5150_COMPOSITE1,
1116 .amux = EM28XX_AMUX_LINE_IN,
1117 .gpio = em2880_msi_digivox_ad_analog,
1118 }, {
1119 .type = EM28XX_VMUX_SVIDEO,
1120 .vmux = TVP5150_SVIDEO,
1121 .amux = EM28XX_AMUX_LINE_IN,
1122 .gpio = em2880_msi_digivox_ad_analog,
1123 } },
1124 },
1125 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1126 .name = "MSI DigiVox A/D II",
1127 .valid = EM28XX_BOARD_NOT_VALIDATED,
1128 .tuner_type = TUNER_XC2028,
1129 .tuner_gpio = default_tuner_gpio,
1130 .decoder = EM28XX_TVP5150,
1131 .input = { {
1132 .type = EM28XX_VMUX_TELEVISION,
1133 .vmux = TVP5150_COMPOSITE0,
1134 .amux = EM28XX_AMUX_VIDEO,
1135 .gpio = em2880_msi_digivox_ad_analog,
1136 }, {
1137 .type = EM28XX_VMUX_COMPOSITE1,
1138 .vmux = TVP5150_COMPOSITE1,
1139 .amux = EM28XX_AMUX_LINE_IN,
1140 .gpio = em2880_msi_digivox_ad_analog,
1141 }, {
1142 .type = EM28XX_VMUX_SVIDEO,
1143 .vmux = TVP5150_SVIDEO,
1144 .amux = EM28XX_AMUX_LINE_IN,
1145 .gpio = em2880_msi_digivox_ad_analog,
1146 } },
1147 },
1148 [EM2880_BOARD_KWORLD_DVB_305U] = {
1149 .name = "KWorld DVB-T 305U",
1150 .valid = EM28XX_BOARD_NOT_VALIDATED,
1151 .tuner_type = TUNER_XC2028,
1152 .tuner_gpio = default_tuner_gpio,
1153 .decoder = EM28XX_TVP5150,
1154 .input = { {
1155 .type = EM28XX_VMUX_TELEVISION,
1156 .vmux = TVP5150_COMPOSITE0,
1157 .amux = EM28XX_AMUX_VIDEO,
1158 }, {
1159 .type = EM28XX_VMUX_COMPOSITE1,
1160 .vmux = TVP5150_COMPOSITE1,
1161 .amux = EM28XX_AMUX_LINE_IN,
1162 }, {
1163 .type = EM28XX_VMUX_SVIDEO,
1164 .vmux = TVP5150_SVIDEO,
1165 .amux = EM28XX_AMUX_LINE_IN,
1166 } },
1167 },
1168 [EM2880_BOARD_KWORLD_DVB_310U] = {
1169 .name = "KWorld DVB-T 310U",
1170 .tuner_type = TUNER_XC2028,
1171 .tuner_gpio = default_tuner_gpio,
1172 .has_dvb = 1,
1173 .dvb_gpio = default_digital,
1174 .mts_firmware = 1,
1175 .decoder = EM28XX_TVP5150,
1176 .input = { {
1177 .type = EM28XX_VMUX_TELEVISION,
1178 .vmux = TVP5150_COMPOSITE0,
1179 .amux = EM28XX_AMUX_VIDEO,
1180 .gpio = default_analog,
1181 }, {
1182 .type = EM28XX_VMUX_COMPOSITE1,
1183 .vmux = TVP5150_COMPOSITE1,
1184 .amux = EM28XX_AMUX_LINE_IN,
1185 .gpio = default_analog,
1186 }, { /* S-video has not been tested yet */
1187 .type = EM28XX_VMUX_SVIDEO,
1188 .vmux = TVP5150_SVIDEO,
1189 .amux = EM28XX_AMUX_LINE_IN,
1190 .gpio = default_analog,
1191 } },
1192 },
1193 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1194 .name = "KWorld ATSC 315U HDTV TV Box",
1195 .valid = EM28XX_BOARD_NOT_VALIDATED,
1196 .tuner_type = TUNER_THOMSON_DTT761X,
1197 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1198 .tda9887_conf = TDA9887_PRESENT,
1199 .decoder = EM28XX_SAA711X,
1200 .has_dvb = 1,
1201 .dvb_gpio = em2882_kworld_315u_digital,
1202 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1203 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1204 /* Analog mode - still not ready */
1205 /*.input = { {
1206 .type = EM28XX_VMUX_TELEVISION,
1207 .vmux = SAA7115_COMPOSITE2,
1208 .amux = EM28XX_AMUX_VIDEO,
1209 .gpio = em2882_kworld_315u_analog,
1210 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1211 }, {
1212 .type = EM28XX_VMUX_COMPOSITE1,
1213 .vmux = SAA7115_COMPOSITE0,
1214 .amux = EM28XX_AMUX_LINE_IN,
1215 .gpio = em2882_kworld_315u_analog1,
1216 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1217 }, {
1218 .type = EM28XX_VMUX_SVIDEO,
1219 .vmux = SAA7115_SVIDEO3,
1220 .amux = EM28XX_AMUX_LINE_IN,
1221 .gpio = em2882_kworld_315u_analog1,
1222 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1223 } }, */
1224 },
1225 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1226 .name = "Empire dual TV",
1227 .tuner_type = TUNER_XC2028,
1228 .tuner_gpio = default_tuner_gpio,
1229 .has_dvb = 1,
1230 .dvb_gpio = default_digital,
1231 .mts_firmware = 1,
1232 .decoder = EM28XX_TVP5150,
1233 .input = { {
1234 .type = EM28XX_VMUX_TELEVISION,
1235 .vmux = TVP5150_COMPOSITE0,
1236 .amux = EM28XX_AMUX_VIDEO,
1237 .gpio = default_analog,
1238 }, {
1239 .type = EM28XX_VMUX_COMPOSITE1,
1240 .vmux = TVP5150_COMPOSITE1,
1241 .amux = EM28XX_AMUX_LINE_IN,
1242 .gpio = default_analog,
1243 }, {
1244 .type = EM28XX_VMUX_SVIDEO,
1245 .vmux = TVP5150_SVIDEO,
1246 .amux = EM28XX_AMUX_LINE_IN,
1247 .gpio = default_analog,
1248 } },
1249 },
1250 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1251 .name = "DNT DA2 Hybrid",
1252 .valid = EM28XX_BOARD_NOT_VALIDATED,
1253 .tuner_type = TUNER_XC2028,
1254 .tuner_gpio = default_tuner_gpio,
1255 .decoder = EM28XX_TVP5150,
1256 .input = { {
1257 .type = EM28XX_VMUX_TELEVISION,
1258 .vmux = TVP5150_COMPOSITE0,
1259 .amux = EM28XX_AMUX_VIDEO,
1260 .gpio = default_analog,
1261 }, {
1262 .type = EM28XX_VMUX_COMPOSITE1,
1263 .vmux = TVP5150_COMPOSITE1,
1264 .amux = EM28XX_AMUX_LINE_IN,
1265 .gpio = default_analog,
1266 }, {
1267 .type = EM28XX_VMUX_SVIDEO,
1268 .vmux = TVP5150_SVIDEO,
1269 .amux = EM28XX_AMUX_LINE_IN,
1270 .gpio = default_analog,
1271 } },
1272 },
1273 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1274 .name = "Pinnacle Hybrid Pro",
1275 .tuner_type = TUNER_XC2028,
1276 .tuner_gpio = default_tuner_gpio,
1277 .decoder = EM28XX_TVP5150,
1278 .has_dvb = 1,
1279 .dvb_gpio = pinnacle_hybrid_pro_digital,
1280 .input = { {
1281 .type = EM28XX_VMUX_TELEVISION,
1282 .vmux = TVP5150_COMPOSITE0,
1283 .amux = EM28XX_AMUX_VIDEO,
1284 .gpio = pinnacle_hybrid_pro_analog,
1285 }, {
1286 .type = EM28XX_VMUX_COMPOSITE1,
1287 .vmux = TVP5150_COMPOSITE1,
1288 .amux = EM28XX_AMUX_LINE_IN,
1289 .gpio = pinnacle_hybrid_pro_analog,
1290 }, {
1291 .type = EM28XX_VMUX_SVIDEO,
1292 .vmux = TVP5150_SVIDEO,
1293 .amux = EM28XX_AMUX_LINE_IN,
1294 .gpio = pinnacle_hybrid_pro_analog,
1295 } },
1296 },
1297 [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1298 .name = "Pinnacle Hybrid Pro (2)",
1299 .valid = EM28XX_BOARD_NOT_VALIDATED,
1300 .tuner_type = TUNER_XC2028,
1301 .tuner_gpio = default_tuner_gpio,
1302 .mts_firmware = 1,
1303 .decoder = EM28XX_TVP5150,
1304 .input = { {
1305 .type = EM28XX_VMUX_TELEVISION,
1306 .vmux = TVP5150_COMPOSITE0,
1307 .amux = EM28XX_AMUX_VIDEO,
1308 .gpio = hauppauge_wintv_hvr_900_analog,
1309 }, {
1310 .type = EM28XX_VMUX_COMPOSITE1,
1311 .vmux = TVP5150_COMPOSITE1,
1312 .amux = EM28XX_AMUX_LINE_IN,
1313 .gpio = hauppauge_wintv_hvr_900_analog,
1314 }, {
1315 .type = EM28XX_VMUX_SVIDEO,
1316 .vmux = TVP5150_SVIDEO,
1317 .amux = EM28XX_AMUX_LINE_IN,
1318 .gpio = hauppauge_wintv_hvr_900_analog,
1319 } },
1320 },
1321 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1322 .name = "Kworld VS-DVB-T 323UR",
1323 .valid = EM28XX_BOARD_NOT_VALIDATED,
1324 .tuner_type = TUNER_XC2028,
1325 .tuner_gpio = default_tuner_gpio,
1326 .decoder = EM28XX_TVP5150,
1327 .input = { {
1328 .type = EM28XX_VMUX_TELEVISION,
1329 .vmux = TVP5150_COMPOSITE0,
1330 .amux = EM28XX_AMUX_VIDEO,
1331 }, {
1332 .type = EM28XX_VMUX_COMPOSITE1,
1333 .vmux = TVP5150_COMPOSITE1,
1334 .amux = EM28XX_AMUX_LINE_IN,
1335 }, {
1336 .type = EM28XX_VMUX_SVIDEO,
1337 .vmux = TVP5150_SVIDEO,
1338 .amux = EM28XX_AMUX_LINE_IN,
1339 } },
1340 },
1341 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1342 .name = "Terratec Hybrid XS (em2882)",
1343 .valid = EM28XX_BOARD_NOT_VALIDATED,
1344 .tuner_type = TUNER_XC2028,
1345 .tuner_gpio = default_tuner_gpio,
1346 .decoder = EM28XX_TVP5150,
1347 .input = { {
1348 .type = EM28XX_VMUX_TELEVISION,
1349 .vmux = TVP5150_COMPOSITE0,
1350 .amux = EM28XX_AMUX_VIDEO,
1351 .gpio = hauppauge_wintv_hvr_900_analog,
1352 }, {
1353 .type = EM28XX_VMUX_COMPOSITE1,
1354 .vmux = TVP5150_COMPOSITE1,
1355 .amux = EM28XX_AMUX_LINE_IN,
1356 .gpio = hauppauge_wintv_hvr_900_analog,
1357 }, {
1358 .type = EM28XX_VMUX_SVIDEO,
1359 .vmux = TVP5150_SVIDEO,
1360 .amux = EM28XX_AMUX_LINE_IN,
1361 .gpio = hauppauge_wintv_hvr_900_analog,
1362 } },
1363 },
1364 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1365 .name = "Kworld PlusTV HD Hybrid 330",
1366 .tuner_type = TUNER_XC2028,
1367 .tuner_gpio = default_tuner_gpio,
1368 .decoder = EM28XX_TVP5150,
1369 .mts_firmware = 1,
1370 .has_dvb = 1,
1371 .dvb_gpio = kworld_330u_digital,
1372 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1373 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1374 EM28XX_I2C_EEPROM_ON_BOARD |
1375 EM28XX_I2C_EEPROM_KEY_VALID,
1376 .input = { {
1377 .type = EM28XX_VMUX_TELEVISION,
1378 .vmux = TVP5150_COMPOSITE0,
1379 .amux = EM28XX_AMUX_VIDEO,
1380 .gpio = kworld_330u_analog,
1381 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1382 }, {
1383 .type = EM28XX_VMUX_COMPOSITE1,
1384 .vmux = TVP5150_COMPOSITE1,
1385 .amux = EM28XX_AMUX_LINE_IN,
1386 .gpio = kworld_330u_analog,
1387 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1388 }, {
1389 .type = EM28XX_VMUX_SVIDEO,
1390 .vmux = TVP5150_SVIDEO,
1391 .amux = EM28XX_AMUX_LINE_IN,
1392 .gpio = kworld_330u_analog,
1393 } },
1394 },
1395 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1396 .name = "Compro VideoMate ForYou/Stereo",
1397 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1398 .tvaudio_addr = 0xb0,
1399 .tda9887_conf = TDA9887_PRESENT,
1400 .decoder = EM28XX_TVP5150,
1401 .adecoder = EM28XX_TVAUDIO,
1402 .mute_gpio = compro_mute_gpio,
1403 .input = { {
1404 .type = EM28XX_VMUX_TELEVISION,
1405 .vmux = TVP5150_COMPOSITE0,
1406 .amux = EM28XX_AMUX_VIDEO,
1407 .gpio = compro_unmute_tv_gpio,
1408 }, {
1409 .type = EM28XX_VMUX_SVIDEO,
1410 .vmux = TVP5150_SVIDEO,
1411 .amux = EM28XX_AMUX_LINE_IN,
1412 .gpio = compro_unmute_svid_gpio,
1413 } },
1414 },
1415 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1416 .name = "Kaiomy TVnPC U2",
1417 .vchannels = 3,
1418 .tuner_type = TUNER_XC2028,
1419 .tuner_addr = 0x61,
1420 .mts_firmware = 1,
1421 .decoder = EM28XX_TVP5150,
1422 .tuner_gpio = default_tuner_gpio,
1423 .ir_codes = ir_codes_kaiomy,
1424 .input = { {
1425 .type = EM28XX_VMUX_TELEVISION,
1426 .vmux = TVP5150_COMPOSITE0,
1427 .amux = EM28XX_AMUX_VIDEO,
1428
1429 }, {
1430 .type = EM28XX_VMUX_COMPOSITE1,
1431 .vmux = TVP5150_COMPOSITE1,
1432 .amux = EM28XX_AMUX_LINE_IN,
1433 }, {
1434 .type = EM28XX_VMUX_SVIDEO,
1435 .vmux = TVP5150_SVIDEO,
1436 .amux = EM28XX_AMUX_LINE_IN,
1437 } },
1438 .radio = {
1439 .type = EM28XX_RADIO,
1440 .amux = EM28XX_AMUX_LINE_IN,
1441 }
1442 },
1443 [EM2860_BOARD_EASYCAP] = {
1444 .name = "Easy Cap Capture DC-60",
1445 .vchannels = 2,
1446 .tuner_type = TUNER_ABSENT,
1447 .decoder = EM28XX_SAA711X,
1448 .input = { {
1449 .type = EM28XX_VMUX_COMPOSITE1,
1450 .vmux = SAA7115_COMPOSITE0,
1451 .amux = EM28XX_AMUX_LINE_IN,
1452 }, {
1453 .type = EM28XX_VMUX_SVIDEO,
1454 .vmux = SAA7115_SVIDEO3,
1455 .amux = EM28XX_AMUX_LINE_IN,
1456 } },
1457 },
1458 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1459 .name = "IO-DATA GV-MVP/SZ",
1460 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1461 .tuner_gpio = default_tuner_gpio,
1462 .tda9887_conf = TDA9887_PRESENT,
1463 .decoder = EM28XX_TVP5150,
1464 .input = { {
1465 .type = EM28XX_VMUX_TELEVISION,
1466 .vmux = TVP5150_COMPOSITE0,
1467 .amux = EM28XX_AMUX_VIDEO,
1468 }, { /* Composite has not been tested yet */
1469 .type = EM28XX_VMUX_COMPOSITE1,
1470 .vmux = TVP5150_COMPOSITE1,
1471 .amux = EM28XX_AMUX_VIDEO,
1472 }, { /* S-video has not been tested yet */
1473 .type = EM28XX_VMUX_SVIDEO,
1474 .vmux = TVP5150_SVIDEO,
1475 .amux = EM28XX_AMUX_VIDEO,
1476 } },
1477 },
1478 [EM2860_BOARD_TERRATEC_GRABBY] = {
1479 .name = "Terratec Grabby",
1480 .vchannels = 2,
1481 .tuner_type = TUNER_ABSENT,
1482 .decoder = EM28XX_SAA711X,
1483 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1484 .input = { {
1485 .type = EM28XX_VMUX_COMPOSITE1,
1486 .vmux = SAA7115_COMPOSITE0,
1487 .amux = EM28XX_AMUX_VIDEO2,
1488 }, {
1489 .type = EM28XX_VMUX_SVIDEO,
1490 .vmux = SAA7115_SVIDEO3,
1491 .amux = EM28XX_AMUX_VIDEO2,
1492 } },
1493 },
1494 [EM2860_BOARD_TERRATEC_AV350] = {
1495 .name = "Terratec AV350",
1496 .vchannels = 2,
1497 .tuner_type = TUNER_ABSENT,
1498 .decoder = EM28XX_TVP5150,
1499 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1500 .mute_gpio = terratec_av350_mute_gpio,
1501 .input = { {
1502 .type = EM28XX_VMUX_COMPOSITE1,
1503 .vmux = TVP5150_COMPOSITE1,
1504 .amux = EM28XX_AUDIO_SRC_LINE,
1505 .gpio = terratec_av350_unmute_gpio,
1506
1507 }, {
1508 .type = EM28XX_VMUX_SVIDEO,
1509 .vmux = TVP5150_SVIDEO,
1510 .amux = EM28XX_AUDIO_SRC_LINE,
1511 .gpio = terratec_av350_unmute_gpio,
1512 } },
1513 },
1514 [EM2882_BOARD_EVGA_INDTUBE] = {
1515 .name = "Evga inDtube",
1516 .tuner_type = TUNER_XC2028,
1517 .tuner_gpio = default_tuner_gpio,
1518 .decoder = EM28XX_TVP5150,
1519 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1520 .mts_firmware = 1,
1521 .has_dvb = 1,
1522 .dvb_gpio = evga_indtube_digital,
1523 .ir_codes = ir_codes_evga_indtube,
1524 .input = { {
1525 .type = EM28XX_VMUX_TELEVISION,
1526 .vmux = TVP5150_COMPOSITE0,
1527 .amux = EM28XX_AMUX_VIDEO,
1528 .gpio = evga_indtube_analog,
1529 }, {
1530 .type = EM28XX_VMUX_COMPOSITE1,
1531 .vmux = TVP5150_COMPOSITE1,
1532 .amux = EM28XX_AMUX_LINE_IN,
1533 .gpio = evga_indtube_analog,
1534 }, {
1535 .type = EM28XX_VMUX_SVIDEO,
1536 .vmux = TVP5150_SVIDEO,
1537 .amux = EM28XX_AMUX_LINE_IN,
1538 .gpio = evga_indtube_analog,
1539 } },
1540 },
1541 };
1542 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1543
1544 /* table of devices that work with this driver */
1545 struct usb_device_id em28xx_id_table[] = {
1546 { USB_DEVICE(0xeb1a, 0x2750),
1547 .driver_info = EM2750_BOARD_UNKNOWN },
1548 { USB_DEVICE(0xeb1a, 0x2751),
1549 .driver_info = EM2750_BOARD_UNKNOWN },
1550 { USB_DEVICE(0xeb1a, 0x2800),
1551 .driver_info = EM2800_BOARD_UNKNOWN },
1552 { USB_DEVICE(0xeb1a, 0x2710),
1553 .driver_info = EM2820_BOARD_UNKNOWN },
1554 { USB_DEVICE(0xeb1a, 0x2820),
1555 .driver_info = EM2820_BOARD_UNKNOWN },
1556 { USB_DEVICE(0xeb1a, 0x2821),
1557 .driver_info = EM2820_BOARD_UNKNOWN },
1558 { USB_DEVICE(0xeb1a, 0x2860),
1559 .driver_info = EM2820_BOARD_UNKNOWN },
1560 { USB_DEVICE(0xeb1a, 0x2861),
1561 .driver_info = EM2820_BOARD_UNKNOWN },
1562 { USB_DEVICE(0xeb1a, 0x2870),
1563 .driver_info = EM2820_BOARD_UNKNOWN },
1564 { USB_DEVICE(0xeb1a, 0x2881),
1565 .driver_info = EM2820_BOARD_UNKNOWN },
1566 { USB_DEVICE(0xeb1a, 0x2883),
1567 .driver_info = EM2820_BOARD_UNKNOWN },
1568 { USB_DEVICE(0xeb1a, 0xe300),
1569 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1570 { USB_DEVICE(0xeb1a, 0xe303),
1571 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1572 { USB_DEVICE(0xeb1a, 0xe305),
1573 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1574 { USB_DEVICE(0xeb1a, 0xe310),
1575 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1576 { USB_DEVICE(0xeb1a, 0xa313),
1577 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1578 { USB_DEVICE(0xeb1a, 0xa316),
1579 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1580 { USB_DEVICE(0xeb1a, 0xe320),
1581 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1582 { USB_DEVICE(0xeb1a, 0xe323),
1583 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1584 { USB_DEVICE(0xeb1a, 0xe350),
1585 .driver_info = EM2870_BOARD_KWORLD_350U },
1586 { USB_DEVICE(0xeb1a, 0xe355),
1587 .driver_info = EM2870_BOARD_KWORLD_355U },
1588 { USB_DEVICE(0xeb1a, 0x2801),
1589 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1590 { USB_DEVICE(0xeb1a, 0xe357),
1591 .driver_info = EM2870_BOARD_KWORLD_355U },
1592 { USB_DEVICE(0x1b80, 0xe302),
1593 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1594 { USB_DEVICE(0x0ccd, 0x0036),
1595 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1596 { USB_DEVICE(0x0ccd, 0x004c),
1597 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1598 { USB_DEVICE(0x0ccd, 0x004f),
1599 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1600 { USB_DEVICE(0x0ccd, 0x005e),
1601 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1602 { USB_DEVICE(0x0ccd, 0x0042),
1603 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1604 { USB_DEVICE(0x0ccd, 0x0043),
1605 .driver_info = EM2870_BOARD_TERRATEC_XS },
1606 { USB_DEVICE(0x0ccd, 0x0047),
1607 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1608 { USB_DEVICE(0x0ccd, 0x0084),
1609 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1610 { USB_DEVICE(0x0ccd, 0x0096),
1611 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1612 { USB_DEVICE(0x185b, 0x2870),
1613 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1614 { USB_DEVICE(0x185b, 0x2041),
1615 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1616 { USB_DEVICE(0x2040, 0x4200),
1617 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1618 { USB_DEVICE(0x2040, 0x4201),
1619 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1620 { USB_DEVICE(0x2040, 0x6500),
1621 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1622 { USB_DEVICE(0x2040, 0x6502),
1623 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1624 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1625 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1626 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1627 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1628 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1629 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1630 { USB_DEVICE(0x2040, 0x651f),
1631 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1632 { USB_DEVICE(0x0438, 0xb002),
1633 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1634 { USB_DEVICE(0x2001, 0xf112),
1635 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1636 { USB_DEVICE(0x2304, 0x0207),
1637 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1638 { USB_DEVICE(0x2304, 0x0208),
1639 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1640 { USB_DEVICE(0x2304, 0x021a),
1641 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1642 { USB_DEVICE(0x2304, 0x0226),
1643 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1644 { USB_DEVICE(0x2304, 0x0227),
1645 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1646 { USB_DEVICE(0x0413, 0x6023),
1647 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1648 { USB_DEVICE(0x093b, 0xa005),
1649 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1650 { USB_DEVICE(0x04bb, 0x0515),
1651 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1652 { },
1653 };
1654 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1655
1656 /*
1657 * EEPROM hash table for devices with generic USB IDs
1658 */
1659 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1660 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1661 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1662 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1663 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1664 {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1665 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1666 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
1667 };
1668
1669 /* I2C devicelist hash table for devices with generic USB IDs */
1670 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1671 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1672 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1673 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1674 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1675 };
1676
1677 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1678 static unsigned short saa711x_addrs[] = {
1679 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
1680 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
1681 I2C_CLIENT_END };
1682
1683 static unsigned short tvp5150_addrs[] = {
1684 0xb8 >> 1,
1685 0xba >> 1,
1686 I2C_CLIENT_END
1687 };
1688
1689 static unsigned short mt9v011_addrs[] = {
1690 0xba >> 1,
1691 I2C_CLIENT_END
1692 };
1693
1694 static unsigned short msp3400_addrs[] = {
1695 0x80 >> 1,
1696 0x88 >> 1,
1697 I2C_CLIENT_END
1698 };
1699
1700 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1701 {
1702 int rc = 0;
1703 struct em28xx *dev = ptr;
1704
1705 if (dev->tuner_type != TUNER_XC2028)
1706 return 0;
1707
1708 if (command != XC2028_TUNER_RESET)
1709 return 0;
1710
1711 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1712
1713 return rc;
1714 }
1715 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1716
1717 static inline void em28xx_set_model(struct em28xx *dev)
1718 {
1719 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1720
1721 /* Those are the default values for the majority of boards
1722 Use those values if not specified otherwise at boards entry
1723 */
1724 if (!dev->board.xclk)
1725 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1726 EM28XX_XCLK_FREQUENCY_12MHZ;
1727
1728 if (!dev->board.i2c_speed)
1729 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1730 EM28XX_I2C_FREQ_100_KHZ;
1731 }
1732
1733
1734 /* FIXME: Should be replaced by a proper mt9m111 driver */
1735 static int em28xx_initialize_mt9m111(struct em28xx *dev)
1736 {
1737 int i;
1738 unsigned char regs[][3] = {
1739 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
1740 { 0x0d, 0x00, 0x00, },
1741 { 0x0a, 0x00, 0x21, },
1742 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
1743 };
1744
1745 for (i = 0; i < ARRAY_SIZE(regs); i++)
1746 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1747
1748 return 0;
1749 }
1750
1751
1752 /* FIXME: Should be replaced by a proper mt9m001 driver */
1753 static int em28xx_initialize_mt9m001(struct em28xx *dev)
1754 {
1755 int i;
1756 unsigned char regs[][3] = {
1757 { 0x0d, 0x00, 0x01, },
1758 { 0x0d, 0x00, 0x00, },
1759 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
1760 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
1761 { 0x20, 0x11, 0x00, },
1762 { 0x06, 0x00, 0x10, },
1763 { 0x2b, 0x00, 0x24, },
1764 { 0x2e, 0x00, 0x24, },
1765 { 0x35, 0x00, 0x24, },
1766 { 0x2d, 0x00, 0x20, },
1767 { 0x2c, 0x00, 0x20, },
1768 { 0x09, 0x0a, 0xd4, },
1769 { 0x35, 0x00, 0x57, },
1770 };
1771
1772 for (i = 0; i < ARRAY_SIZE(regs); i++)
1773 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1774
1775 return 0;
1776 }
1777
1778 /* HINT method: webcam I2C chips
1779 *
1780 * This method works for webcams with Micron sensors
1781 */
1782 static int em28xx_hint_sensor(struct em28xx *dev)
1783 {
1784 int rc;
1785 char *sensor_name;
1786 unsigned char cmd;
1787 __be16 version_be;
1788 u16 version;
1789
1790 /* Micron sensor detection */
1791 dev->i2c_client.addr = 0xba >> 1;
1792 cmd = 0;
1793 i2c_master_send(&dev->i2c_client, &cmd, 1);
1794 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
1795 if (rc != 2)
1796 return -EINVAL;
1797
1798 version = be16_to_cpu(version_be);
1799 switch (version) {
1800 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
1801 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
1802 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
1803 em28xx_set_model(dev);
1804
1805 sensor_name = "mt9v011";
1806 dev->em28xx_sensor = EM28XX_MT9V011;
1807 dev->sensor_xres = 640;
1808 dev->sensor_yres = 480;
1809 /*
1810 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
1811 * the Silvercrest cam I have here for testing - for higher
1812 * resolutions, a high clock cause horizontal artifacts, so we
1813 * need to use a lower xclk frequency.
1814 * Yet, it would be possible to adjust xclk depending on the
1815 * desired resolution, since this affects directly the
1816 * frame rate.
1817 */
1818 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
1819 dev->sensor_xtal = 4300000;
1820
1821 /* probably means GRGB 16 bit bayer */
1822 dev->vinmode = 0x0d;
1823 dev->vinctl = 0x00;
1824
1825 break;
1826
1827 case 0x143a: /* MT9M111 as found in the ECS G200 */
1828 dev->model = EM2750_BOARD_UNKNOWN;
1829 em28xx_set_model(dev);
1830
1831 sensor_name = "mt9m111";
1832 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
1833 dev->em28xx_sensor = EM28XX_MT9M111;
1834 em28xx_initialize_mt9m111(dev);
1835 dev->sensor_xres = 640;
1836 dev->sensor_yres = 512;
1837
1838 dev->vinmode = 0x0a;
1839 dev->vinctl = 0x00;
1840
1841 break;
1842
1843 case 0x8431:
1844 dev->model = EM2750_BOARD_UNKNOWN;
1845 em28xx_set_model(dev);
1846
1847 sensor_name = "mt9m001";
1848 dev->em28xx_sensor = EM28XX_MT9M001;
1849 em28xx_initialize_mt9m001(dev);
1850 dev->sensor_xres = 1280;
1851 dev->sensor_yres = 1024;
1852
1853 /* probably means BGGR 16 bit bayer */
1854 dev->vinmode = 0x0c;
1855 dev->vinctl = 0x00;
1856
1857 break;
1858 default:
1859 printk("Unknown Micron Sensor 0x%04x\n", version);
1860 return -EINVAL;
1861 }
1862
1863 /* Setup webcam defaults */
1864 em28xx_pre_card_setup(dev);
1865
1866 em28xx_errdev("Sensor is %s, using model %s entry.\n",
1867 sensor_name, em28xx_boards[dev->model].name);
1868
1869 return 0;
1870 }
1871
1872 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1873 * this won't work for boards with generic PCI IDs
1874 */
1875 void em28xx_pre_card_setup(struct em28xx *dev)
1876 {
1877 /* Set the initial XCLK and I2C clock values based on the board
1878 definition */
1879 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1880 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1881 msleep(50);
1882
1883 /* request some modules */
1884 switch (dev->model) {
1885 case EM2861_BOARD_PLEXTOR_PX_TV100U:
1886 /* Sets the msp34xx I2S speed */
1887 dev->i2s_speed = 2048000;
1888 break;
1889 case EM2861_BOARD_KWORLD_PVRTV_300U:
1890 case EM2880_BOARD_KWORLD_DVB_305U:
1891 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1892 msleep(10);
1893 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1894 msleep(10);
1895 break;
1896 case EM2870_BOARD_COMPRO_VIDEOMATE:
1897 /* TODO: someone can do some cleanup here...
1898 not everything's needed */
1899 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1900 msleep(10);
1901 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1902 msleep(10);
1903 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1904 mdelay(70);
1905 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1906 mdelay(70);
1907 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1908 mdelay(70);
1909 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1910 mdelay(70);
1911 break;
1912 case EM2870_BOARD_TERRATEC_XS_MT2060:
1913 /* this device needs some gpio writes to get the DVB-T
1914 demod work */
1915 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1916 mdelay(70);
1917 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1918 mdelay(70);
1919 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1920 mdelay(70);
1921 break;
1922 case EM2870_BOARD_PINNACLE_PCTV_DVB:
1923 /* this device needs some gpio writes to get the
1924 DVB-T demod work */
1925 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1926 mdelay(70);
1927 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1928 mdelay(70);
1929 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1930 mdelay(70);
1931 break;
1932 case EM2820_BOARD_GADMEI_UTV310:
1933 case EM2820_BOARD_MSI_VOX_USB_2:
1934 /* enables audio for that devices */
1935 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1936 break;
1937
1938 case EM2882_BOARD_KWORLD_ATSC_315U:
1939 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1940 msleep(10);
1941 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1942 msleep(10);
1943 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1944 msleep(10);
1945 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
1946 msleep(10);
1947 break;
1948
1949 case EM2860_BOARD_KAIOMY_TVNPC_U2:
1950 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
1951 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1952 em28xx_write_regs(dev, 0x0d, "\x42", 1);
1953 em28xx_write_regs(dev, 0x08, "\xfd", 1);
1954 msleep(10);
1955 em28xx_write_regs(dev, 0x08, "\xff", 1);
1956 msleep(10);
1957 em28xx_write_regs(dev, 0x08, "\x7f", 1);
1958 msleep(10);
1959 em28xx_write_regs(dev, 0x08, "\x6b", 1);
1960
1961 break;
1962 case EM2860_BOARD_EASYCAP:
1963 em28xx_write_regs(dev, 0x08, "\xf8", 1);
1964 break;
1965
1966 case EM2820_BOARD_IODATA_GVMVP_SZ:
1967 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1968 msleep(70);
1969 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
1970 msleep(10);
1971 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1972 msleep(70);
1973 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1974 msleep(70);
1975 break;
1976 }
1977
1978 em28xx_gpio_set(dev, dev->board.tuner_gpio);
1979 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1980
1981 /* Unlock device */
1982 em28xx_set_mode(dev, EM28XX_SUSPEND);
1983 }
1984
1985 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1986 {
1987 memset(ctl, 0, sizeof(*ctl));
1988
1989 ctl->fname = XC2028_DEFAULT_FIRMWARE;
1990 ctl->max_len = 64;
1991 ctl->mts = em28xx_boards[dev->model].mts_firmware;
1992
1993 switch (dev->model) {
1994 case EM2880_BOARD_EMPIRE_DUAL_TV:
1995 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1996 ctl->demod = XC3028_FE_ZARLINK456;
1997 break;
1998 case EM2880_BOARD_TERRATEC_HYBRID_XS:
1999 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2000 ctl->demod = XC3028_FE_ZARLINK456;
2001 break;
2002 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2003 /* djh - Not sure which demod we need here */
2004 ctl->demod = XC3028_FE_DEFAULT;
2005 break;
2006 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2007 ctl->demod = XC3028_FE_DEFAULT;
2008 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2009 break;
2010 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2011 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2012 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2013 /* FIXME: Better to specify the needed IF */
2014 ctl->demod = XC3028_FE_DEFAULT;
2015 break;
2016 case EM2883_BOARD_KWORLD_HYBRID_330U:
2017 ctl->demod = XC3028_FE_CHINA;
2018 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2019 break;
2020 case EM2882_BOARD_EVGA_INDTUBE:
2021 ctl->demod = XC3028_FE_CHINA;
2022 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2023 break;
2024 default:
2025 ctl->demod = XC3028_FE_OREN538;
2026 }
2027 }
2028
2029 static void em28xx_tuner_setup(struct em28xx *dev)
2030 {
2031 struct tuner_setup tun_setup;
2032 struct v4l2_frequency f;
2033
2034 if (dev->tuner_type == TUNER_ABSENT)
2035 return;
2036
2037 memset(&tun_setup, 0, sizeof(tun_setup));
2038
2039 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2040 tun_setup.tuner_callback = em28xx_tuner_callback;
2041
2042 if (dev->board.radio.type) {
2043 tun_setup.type = dev->board.radio.type;
2044 tun_setup.addr = dev->board.radio_addr;
2045
2046 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2047 }
2048
2049 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2050 tun_setup.type = dev->tuner_type;
2051 tun_setup.addr = dev->tuner_addr;
2052
2053 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2054 }
2055
2056 if (dev->tda9887_conf) {
2057 struct v4l2_priv_tun_config tda9887_cfg;
2058
2059 tda9887_cfg.tuner = TUNER_TDA9887;
2060 tda9887_cfg.priv = &dev->tda9887_conf;
2061
2062 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2063 }
2064
2065 if (dev->tuner_type == TUNER_XC2028) {
2066 struct v4l2_priv_tun_config xc2028_cfg;
2067 struct xc2028_ctrl ctl;
2068
2069 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2070 memset(&ctl, 0, sizeof(ctl));
2071
2072 em28xx_setup_xc3028(dev, &ctl);
2073
2074 xc2028_cfg.tuner = TUNER_XC2028;
2075 xc2028_cfg.priv = &ctl;
2076
2077 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2078 }
2079
2080 /* configure tuner */
2081 f.tuner = 0;
2082 f.type = V4L2_TUNER_ANALOG_TV;
2083 f.frequency = 9076; /* just a magic number */
2084 dev->ctl_freq = f.frequency;
2085 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2086 }
2087
2088 static int em28xx_hint_board(struct em28xx *dev)
2089 {
2090 int i;
2091
2092 /* HINT method: EEPROM
2093 *
2094 * This method works only for boards with eeprom.
2095 * Uses a hash of all eeprom bytes. The hash should be
2096 * unique for a vendor/tuner pair.
2097 * There are a high chance that tuners for different
2098 * video standards produce different hashes.
2099 */
2100 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2101 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2102 dev->model = em28xx_eeprom_hash[i].model;
2103 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2104
2105 em28xx_errdev("Your board has no unique USB ID.\n");
2106 em28xx_errdev("A hint were successfully done, "
2107 "based on eeprom hash.\n");
2108 em28xx_errdev("This method is not 100%% failproof.\n");
2109 em28xx_errdev("If the board were missdetected, "
2110 "please email this log to:\n");
2111 em28xx_errdev("\tV4L Mailing List "
2112 " <linux-media@vger.kernel.org>\n");
2113 em28xx_errdev("Board detected as %s\n",
2114 em28xx_boards[dev->model].name);
2115
2116 return 0;
2117 }
2118 }
2119
2120 /* HINT method: I2C attached devices
2121 *
2122 * This method works for all boards.
2123 * Uses a hash of i2c scanned devices.
2124 * Devices with the same i2c attached chips will
2125 * be considered equal.
2126 * This method is less precise than the eeprom one.
2127 */
2128
2129 /* user did not request i2c scanning => do it now */
2130 if (!dev->i2c_hash)
2131 em28xx_do_i2c_scan(dev);
2132
2133 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2134 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2135 dev->model = em28xx_i2c_hash[i].model;
2136 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2137 em28xx_errdev("Your board has no unique USB ID.\n");
2138 em28xx_errdev("A hint were successfully done, "
2139 "based on i2c devicelist hash.\n");
2140 em28xx_errdev("This method is not 100%% failproof.\n");
2141 em28xx_errdev("If the board were missdetected, "
2142 "please email this log to:\n");
2143 em28xx_errdev("\tV4L Mailing List "
2144 " <linux-media@vger.kernel.org>\n");
2145 em28xx_errdev("Board detected as %s\n",
2146 em28xx_boards[dev->model].name);
2147
2148 return 0;
2149 }
2150 }
2151
2152 em28xx_errdev("Your board has no unique USB ID and thus need a "
2153 "hint to be detected.\n");
2154 em28xx_errdev("You may try to use card=<n> insmod option to "
2155 "workaround that.\n");
2156 em28xx_errdev("Please send an email with this log to:\n");
2157 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2158 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2159 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2160
2161 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2162 " insmod option:\n");
2163 for (i = 0; i < em28xx_bcount; i++) {
2164 em28xx_errdev(" card=%d -> %s\n",
2165 i, em28xx_boards[i].name);
2166 }
2167 return -1;
2168 }
2169
2170 /* ----------------------------------------------------------------------- */
2171 void em28xx_register_i2c_ir(struct em28xx *dev)
2172 {
2173 struct i2c_board_info info;
2174 struct IR_i2c_init_data init_data;
2175 const unsigned short addr_list[] = {
2176 0x30, 0x47, I2C_CLIENT_END
2177 };
2178
2179 if (disable_ir)
2180 return;
2181
2182 memset(&info, 0, sizeof(struct i2c_board_info));
2183 memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
2184 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2185
2186 /* detect & configure */
2187 switch (dev->model) {
2188 case (EM2800_BOARD_UNKNOWN):
2189 break;
2190 case (EM2820_BOARD_UNKNOWN):
2191 break;
2192 case (EM2800_BOARD_TERRATEC_CINERGY_200):
2193 case (EM2820_BOARD_TERRATEC_CINERGY_250):
2194 init_data.ir_codes = ir_codes_em_terratec;
2195 init_data.get_key = em28xx_get_key_terratec;
2196 init_data.name = "i2c IR (EM28XX Terratec)";
2197 break;
2198 case (EM2820_BOARD_PINNACLE_USB_2):
2199 init_data.ir_codes = ir_codes_pinnacle_grey;
2200 init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2201 init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2202 break;
2203 case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
2204 init_data.ir_codes = ir_codes_hauppauge_new;
2205 init_data.get_key = em28xx_get_key_em_haup;
2206 init_data.name = "i2c IR (EM2840 Hauppauge)";
2207 break;
2208 case (EM2820_BOARD_MSI_VOX_USB_2):
2209 break;
2210 case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
2211 break;
2212 case (EM2800_BOARD_KWORLD_USB2800):
2213 break;
2214 case (EM2800_BOARD_GRABBEEX_USB2800):
2215 break;
2216 }
2217
2218 if (init_data.name)
2219 info.platform_data = &init_data;
2220 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
2221 }
2222
2223 void em28xx_card_setup(struct em28xx *dev)
2224 {
2225 /*
2226 * If the device can be a webcam, seek for a sensor.
2227 * If sensor is not found, then it isn't a webcam.
2228 */
2229 if (dev->board.is_webcam) {
2230 if (em28xx_hint_sensor(dev) < 0)
2231 dev->board.is_webcam = 0;
2232 else
2233 dev->progressive = 1;
2234 } else
2235 em28xx_set_model(dev);
2236
2237 em28xx_info("Identified as %s (card=%d)\n",
2238 dev->board.name, dev->model);
2239
2240 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2241 if (em28xx_boards[dev->model].tuner_addr)
2242 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2243
2244 if (em28xx_boards[dev->model].tda9887_conf)
2245 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2246
2247 /* request some modules */
2248 switch (dev->model) {
2249 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2250 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2251 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2252 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2253 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2254 {
2255 struct tveeprom tv;
2256 #ifdef CONFIG_MODULES
2257 request_module("tveeprom");
2258 #endif
2259 /* Call first TVeeprom */
2260
2261 dev->i2c_client.addr = 0xa0 >> 1;
2262 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2263
2264 dev->tuner_type = tv.tuner_type;
2265
2266 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2267 dev->i2s_speed = 2048000;
2268 dev->board.has_msp34xx = 1;
2269 }
2270 #ifdef CONFIG_MODULES
2271 if (tv.has_ir)
2272 request_module("ir-kbd-i2c");
2273 #endif
2274 break;
2275 }
2276 case EM2882_BOARD_KWORLD_ATSC_315U:
2277 em28xx_write_reg(dev, 0x0d, 0x42);
2278 msleep(10);
2279 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2280 msleep(10);
2281 break;
2282 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2283 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2284 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2285 break;
2286 case EM2820_BOARD_UNKNOWN:
2287 case EM2800_BOARD_UNKNOWN:
2288 /*
2289 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2290 *
2291 * This occurs because they share identical USB vendor and
2292 * product IDs.
2293 *
2294 * What we do here is look up the EEPROM hash of the K-WORLD
2295 * and if it is found then we decide that we do not have
2296 * a DIGIVOX and reset the device to the K-WORLD instead.
2297 *
2298 * This solution is only valid if they do not share eeprom
2299 * hash identities which has not been determined as yet.
2300 */
2301 case EM2880_BOARD_MSI_DIGIVOX_AD:
2302 if (!em28xx_hint_board(dev))
2303 em28xx_set_model(dev);
2304
2305 /* In cases where we had to use a board hint, the call to
2306 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2307 so make the call now so the analog GPIOs are set properly
2308 before probing the i2c bus. */
2309 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2310 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2311 break;
2312 }
2313
2314 if (dev->board.has_snapshot_button)
2315 em28xx_register_snapshot_button(dev);
2316
2317 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2318 em28xx_errdev("\n\n");
2319 em28xx_errdev("The support for this board weren't "
2320 "valid yet.\n");
2321 em28xx_errdev("Please send a report of having this working\n");
2322 em28xx_errdev("not to V4L mailing list (and/or to other "
2323 "addresses)\n\n");
2324 }
2325
2326 /* Allow override tuner type by a module parameter */
2327 if (tuner >= 0)
2328 dev->tuner_type = tuner;
2329
2330 /* request some modules */
2331 if (dev->board.has_msp34xx)
2332 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2333 "msp3400", "msp3400", msp3400_addrs);
2334
2335 if (dev->board.decoder == EM28XX_SAA711X)
2336 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2337 "saa7115", "saa7115_auto", saa711x_addrs);
2338
2339 if (dev->board.decoder == EM28XX_TVP5150)
2340 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2341 "tvp5150", "tvp5150", tvp5150_addrs);
2342
2343 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2344 struct v4l2_subdev *sd;
2345
2346 sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2347 &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
2348 v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
2349 }
2350
2351
2352 if (dev->board.adecoder == EM28XX_TVAUDIO)
2353 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2354 "tvaudio", "tvaudio", dev->board.tvaudio_addr);
2355
2356 if (dev->board.tuner_type != TUNER_ABSENT) {
2357 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2358
2359 if (dev->board.radio.type)
2360 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2361 "tuner", "tuner", dev->board.radio_addr);
2362
2363 if (has_demod)
2364 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2365 &dev->i2c_adap, "tuner", "tuner",
2366 v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2367 if (dev->tuner_addr == 0) {
2368 enum v4l2_i2c_tuner_type type =
2369 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2370 struct v4l2_subdev *sd;
2371
2372 sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2373 &dev->i2c_adap, "tuner", "tuner",
2374 v4l2_i2c_tuner_addrs(type));
2375
2376 if (sd)
2377 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2378 } else {
2379 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2380 "tuner", "tuner", dev->tuner_addr);
2381 }
2382 }
2383
2384 em28xx_tuner_setup(dev);
2385
2386 if(!disable_ir)
2387 em28xx_ir_init(dev);
2388 }
2389
2390
2391 #if defined(CONFIG_MODULES) && defined(MODULE)
2392 static void request_module_async(struct work_struct *work)
2393 {
2394 struct em28xx *dev = container_of(work,
2395 struct em28xx, request_module_wk);
2396
2397 if (dev->has_audio_class)
2398 request_module("snd-usb-audio");
2399 else if (dev->has_alsa_audio)
2400 request_module("em28xx-alsa");
2401
2402 if (dev->board.has_dvb)
2403 request_module("em28xx-dvb");
2404 }
2405
2406 static void request_modules(struct em28xx *dev)
2407 {
2408 INIT_WORK(&dev->request_module_wk, request_module_async);
2409 schedule_work(&dev->request_module_wk);
2410 }
2411 #else
2412 #define request_modules(dev)
2413 #endif /* CONFIG_MODULES */
2414
2415 /*
2416 * em28xx_realease_resources()
2417 * unregisters the v4l2,i2c and usb devices
2418 * called when the device gets disconected or at module unload
2419 */
2420 void em28xx_release_resources(struct em28xx *dev)
2421 {
2422 if (dev->sbutton_input_dev)
2423 em28xx_deregister_snapshot_button(dev);
2424
2425 if (dev->ir)
2426 em28xx_ir_fini(dev);
2427
2428 /*FIXME: I2C IR should be disconnected */
2429
2430 em28xx_release_analog_resources(dev);
2431
2432 em28xx_remove_from_devlist(dev);
2433
2434 em28xx_i2c_unregister(dev);
2435
2436 v4l2_device_unregister(&dev->v4l2_dev);
2437
2438 usb_put_dev(dev->udev);
2439
2440 /* Mark device as unused */
2441 em28xx_devused &= ~(1 << dev->devno);
2442 };
2443
2444 /*
2445 * em28xx_init_dev()
2446 * allocates and inits the device structs, registers i2c bus and v4l device
2447 */
2448 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2449 struct usb_interface *interface,
2450 int minor)
2451 {
2452 struct em28xx *dev = *devhandle;
2453 int retval;
2454 int errCode;
2455
2456 dev->udev = udev;
2457 mutex_init(&dev->ctrl_urb_lock);
2458 spin_lock_init(&dev->slock);
2459 init_waitqueue_head(&dev->open);
2460 init_waitqueue_head(&dev->wait_frame);
2461 init_waitqueue_head(&dev->wait_stream);
2462
2463 dev->em28xx_write_regs = em28xx_write_regs;
2464 dev->em28xx_read_reg = em28xx_read_reg;
2465 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2466 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2467 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2468 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2469
2470 em28xx_set_model(dev);
2471
2472 /* Set the default GPO/GPIO for legacy devices */
2473 dev->reg_gpo_num = EM2880_R04_GPO;
2474 dev->reg_gpio_num = EM28XX_R08_GPIO;
2475
2476 dev->wait_after_write = 5;
2477
2478 /* Based on the Chip ID, set the device configuration */
2479 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2480 if (retval > 0) {
2481 dev->chip_id = retval;
2482
2483 switch (dev->chip_id) {
2484 case CHIP_ID_EM2710:
2485 em28xx_info("chip ID is em2710\n");
2486 break;
2487 case CHIP_ID_EM2750:
2488 em28xx_info("chip ID is em2750\n");
2489 break;
2490 case CHIP_ID_EM2820:
2491 em28xx_info("chip ID is em2820 (or em2710)\n");
2492 break;
2493 case CHIP_ID_EM2840:
2494 em28xx_info("chip ID is em2840\n");
2495 break;
2496 case CHIP_ID_EM2860:
2497 em28xx_info("chip ID is em2860\n");
2498 break;
2499 case CHIP_ID_EM2870:
2500 em28xx_info("chip ID is em2870\n");
2501 dev->wait_after_write = 0;
2502 break;
2503 case CHIP_ID_EM2874:
2504 em28xx_info("chip ID is em2874\n");
2505 dev->reg_gpio_num = EM2874_R80_GPIO;
2506 dev->wait_after_write = 0;
2507 break;
2508 case CHIP_ID_EM2883:
2509 em28xx_info("chip ID is em2882/em2883\n");
2510 dev->wait_after_write = 0;
2511 break;
2512 default:
2513 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
2514 }
2515 }
2516
2517 /* Prepopulate cached GPO register content */
2518 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
2519 if (retval >= 0)
2520 dev->reg_gpo = retval;
2521
2522 em28xx_pre_card_setup(dev);
2523
2524 if (!dev->board.is_em2800) {
2525 /* Sets I2C speed to 100 KHz */
2526 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
2527 if (retval < 0) {
2528 em28xx_errdev("%s: em28xx_write_regs_req failed!"
2529 " retval [%d]\n",
2530 __func__, retval);
2531 return retval;
2532 }
2533 }
2534
2535 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2536 if (retval < 0) {
2537 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2538 return retval;
2539 }
2540
2541 /* register i2c bus */
2542 errCode = em28xx_i2c_register(dev);
2543 if (errCode < 0) {
2544 v4l2_device_unregister(&dev->v4l2_dev);
2545 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2546 __func__, errCode);
2547 return errCode;
2548 }
2549
2550 /*
2551 * Default format, used for tvp5150 or saa711x output formats
2552 */
2553 dev->vinmode = 0x10;
2554 dev->vinctl = 0x11;
2555
2556 /* Do board specific init and eeprom reading */
2557 em28xx_card_setup(dev);
2558
2559 /* Configure audio */
2560 errCode = em28xx_audio_setup(dev);
2561 if (errCode < 0) {
2562 v4l2_device_unregister(&dev->v4l2_dev);
2563 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2564 __func__, errCode);
2565 }
2566
2567 /* wake i2c devices */
2568 em28xx_wake_i2c(dev);
2569
2570 /* init video dma queues */
2571 INIT_LIST_HEAD(&dev->vidq.active);
2572 INIT_LIST_HEAD(&dev->vidq.queued);
2573
2574
2575 if (dev->board.has_msp34xx) {
2576 /* Send a reset to other chips via gpio */
2577 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2578 if (errCode < 0) {
2579 em28xx_errdev("%s: em28xx_write_regs_req - "
2580 "msp34xx(1) failed! errCode [%d]\n",
2581 __func__, errCode);
2582 return errCode;
2583 }
2584 msleep(3);
2585
2586 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2587 if (errCode < 0) {
2588 em28xx_errdev("%s: em28xx_write_regs_req - "
2589 "msp34xx(2) failed! errCode [%d]\n",
2590 __func__, errCode);
2591 return errCode;
2592 }
2593 msleep(3);
2594 }
2595
2596 em28xx_add_into_devlist(dev);
2597
2598 retval = em28xx_register_analog_devices(dev);
2599 if (retval < 0) {
2600 em28xx_release_resources(dev);
2601 goto fail_reg_devices;
2602 }
2603
2604 em28xx_init_extension(dev);
2605
2606 /* Save some power by putting tuner to sleep */
2607 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
2608
2609 return 0;
2610
2611 fail_reg_devices:
2612 return retval;
2613 }
2614
2615 /*
2616 * em28xx_usb_probe()
2617 * checks for supported devices
2618 */
2619 static int em28xx_usb_probe(struct usb_interface *interface,
2620 const struct usb_device_id *id)
2621 {
2622 const struct usb_endpoint_descriptor *endpoint;
2623 struct usb_device *udev;
2624 struct usb_interface *uif;
2625 struct em28xx *dev = NULL;
2626 int retval;
2627 int i, nr, ifnum, isoc_pipe;
2628 char *speed;
2629 char descr[255] = "";
2630
2631 udev = usb_get_dev(interface_to_usbdev(interface));
2632 ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2633
2634 /* Check to see next free device and mark as used */
2635 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2636 em28xx_devused |= 1<<nr;
2637
2638 /* Don't register audio interfaces */
2639 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2640 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2641 "interface %i, class %i\n",
2642 le16_to_cpu(udev->descriptor.idVendor),
2643 le16_to_cpu(udev->descriptor.idProduct),
2644 ifnum,
2645 interface->altsetting[0].desc.bInterfaceClass);
2646
2647 em28xx_devused &= ~(1<<nr);
2648 retval = -ENODEV;
2649 goto err;
2650 }
2651
2652 endpoint = &interface->cur_altsetting->endpoint[0].desc;
2653
2654 /* check if the device has the iso in endpoint at the correct place */
2655 if (usb_endpoint_xfer_isoc(endpoint)
2656 &&
2657 (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2658 /* It's a newer em2874/em2875 device */
2659 isoc_pipe = 0;
2660 } else {
2661 int check_interface = 1;
2662 isoc_pipe = 1;
2663 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2664 if (!usb_endpoint_xfer_isoc(endpoint))
2665 check_interface = 0;
2666
2667 if (usb_endpoint_dir_out(endpoint))
2668 check_interface = 0;
2669
2670 if (!check_interface) {
2671 em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2672 "interface %i, class %i found.\n",
2673 le16_to_cpu(udev->descriptor.idVendor),
2674 le16_to_cpu(udev->descriptor.idProduct),
2675 ifnum,
2676 interface->altsetting[0].desc.bInterfaceClass);
2677
2678 em28xx_err(DRIVER_NAME " This is an anciliary "
2679 "interface not used by the driver\n");
2680
2681 em28xx_devused &= ~(1<<nr);
2682 retval = -ENODEV;
2683 goto err;
2684 }
2685 }
2686
2687 switch (udev->speed) {
2688 case USB_SPEED_LOW:
2689 speed = "1.5";
2690 break;
2691 case USB_SPEED_UNKNOWN:
2692 case USB_SPEED_FULL:
2693 speed = "12";
2694 break;
2695 case USB_SPEED_HIGH:
2696 speed = "480";
2697 break;
2698 default:
2699 speed = "unknown";
2700 }
2701
2702 if (udev->manufacturer)
2703 strlcpy(descr, udev->manufacturer, sizeof(descr));
2704
2705 if (udev->product) {
2706 if (*descr)
2707 strlcat(descr, " ", sizeof(descr));
2708 strlcat(descr, udev->product, sizeof(descr));
2709 }
2710 if (*descr)
2711 strlcat(descr, " ", sizeof(descr));
2712
2713 printk(DRIVER_NAME ": New device %s@ %s Mbps "
2714 "(%04x:%04x, interface %d, class %d)\n",
2715 descr,
2716 speed,
2717 le16_to_cpu(udev->descriptor.idVendor),
2718 le16_to_cpu(udev->descriptor.idProduct),
2719 ifnum,
2720 interface->altsetting->desc.bInterfaceNumber);
2721
2722 /*
2723 * Make sure we have 480 Mbps of bandwidth, otherwise things like
2724 * video stream wouldn't likely work, since 12 Mbps is generally
2725 * not enough even for most Digital TV streams.
2726 */
2727 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
2728 printk(DRIVER_NAME ": Device initialization failed.\n");
2729 printk(DRIVER_NAME ": Device must be connected to a high-speed"
2730 " USB 2.0 port.\n");
2731 em28xx_devused &= ~(1<<nr);
2732 retval = -ENODEV;
2733 goto err;
2734 }
2735
2736 if (nr >= EM28XX_MAXBOARDS) {
2737 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
2738 EM28XX_MAXBOARDS);
2739 em28xx_devused &= ~(1<<nr);
2740 retval = -ENOMEM;
2741 goto err;
2742 }
2743
2744 /* allocate memory for our device state and initialize it */
2745 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2746 if (dev == NULL) {
2747 em28xx_err(DRIVER_NAME ": out of memory!\n");
2748 em28xx_devused &= ~(1<<nr);
2749 retval = -ENOMEM;
2750 goto err;
2751 }
2752
2753 snprintf(dev->name, 29, "em28xx #%d", nr);
2754 dev->devno = nr;
2755 dev->model = id->driver_info;
2756 dev->alt = -1;
2757
2758 /* Checks if audio is provided by some interface */
2759 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
2760 uif = udev->config->interface[i];
2761 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2762 dev->has_audio_class = 1;
2763 break;
2764 }
2765 }
2766
2767 /* compute alternate max packet sizes */
2768 uif = udev->actconfig->interface[0];
2769
2770 dev->num_alt = uif->num_altsetting;
2771 dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
2772
2773 if (dev->alt_max_pkt_size == NULL) {
2774 em28xx_errdev("out of memory!\n");
2775 em28xx_devused &= ~(1<<nr);
2776 kfree(dev);
2777 retval = -ENOMEM;
2778 goto err;
2779 }
2780
2781 for (i = 0; i < dev->num_alt ; i++) {
2782 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
2783 dev->alt_max_pkt_size[i] =
2784 (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
2785 }
2786
2787 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
2788 dev->model = card[nr];
2789
2790 /* allocate device struct */
2791 mutex_init(&dev->lock);
2792 mutex_lock(&dev->lock);
2793 retval = em28xx_init_dev(&dev, udev, interface, nr);
2794 if (retval) {
2795 em28xx_devused &= ~(1<<dev->devno);
2796 mutex_unlock(&dev->lock);
2797 kfree(dev);
2798 goto err;
2799 }
2800
2801 /* save our data pointer in this interface device */
2802 usb_set_intfdata(interface, dev);
2803
2804 request_modules(dev);
2805
2806 /* Should be the last thing to do, to avoid newer udev's to
2807 open the device before fully initializing it
2808 */
2809 mutex_unlock(&dev->lock);
2810
2811 return 0;
2812
2813 err:
2814 return retval;
2815 }
2816
2817 /*
2818 * em28xx_usb_disconnect()
2819 * called when the device gets diconencted
2820 * video device will be unregistered on v4l2_close in case it is still open
2821 */
2822 static void em28xx_usb_disconnect(struct usb_interface *interface)
2823 {
2824 struct em28xx *dev;
2825
2826 dev = usb_get_intfdata(interface);
2827 usb_set_intfdata(interface, NULL);
2828
2829 if (!dev)
2830 return;
2831
2832 em28xx_info("disconnecting %s\n", dev->vdev->name);
2833
2834 /* wait until all current v4l2 io is finished then deallocate
2835 resources */
2836 mutex_lock(&dev->lock);
2837
2838 wake_up_interruptible_all(&dev->open);
2839
2840 v4l2_device_disconnect(&dev->v4l2_dev);
2841
2842 if (dev->users) {
2843 em28xx_warn
2844 ("device /dev/video%d is open! Deregistration and memory "
2845 "deallocation are deferred on close.\n",
2846 dev->vdev->num);
2847
2848 dev->state |= DEV_MISCONFIGURED;
2849 em28xx_uninit_isoc(dev);
2850 dev->state |= DEV_DISCONNECTED;
2851 wake_up_interruptible(&dev->wait_frame);
2852 wake_up_interruptible(&dev->wait_stream);
2853 } else {
2854 dev->state |= DEV_DISCONNECTED;
2855 em28xx_release_resources(dev);
2856 }
2857
2858 em28xx_close_extension(dev);
2859
2860 mutex_unlock(&dev->lock);
2861
2862 if (!dev->users) {
2863 kfree(dev->alt_max_pkt_size);
2864 kfree(dev);
2865 }
2866 }
2867
2868 static struct usb_driver em28xx_usb_driver = {
2869 .name = "em28xx",
2870 .probe = em28xx_usb_probe,
2871 .disconnect = em28xx_usb_disconnect,
2872 .id_table = em28xx_id_table,
2873 };
2874
2875 static int __init em28xx_module_init(void)
2876 {
2877 int result;
2878
2879 /* register this driver with the USB subsystem */
2880 result = usb_register(&em28xx_usb_driver);
2881 if (result)
2882 em28xx_err(DRIVER_NAME
2883 " usb_register failed. Error number %d.\n", result);
2884
2885 printk(KERN_INFO DRIVER_NAME " driver loaded\n");
2886
2887 return result;
2888 }
2889
2890 static void __exit em28xx_module_exit(void)
2891 {
2892 /* deregister this driver with the USB subsystem */
2893 usb_deregister(&em28xx_usb_driver);
2894 }
2895
2896 module_init(em28xx_module_init);
2897 module_exit(em28xx_module_exit);
Linux with added FPC-III support