drivers/net/irda/nsc-ircc.h

   1 /*********************************************************************
   2  *
   3  * Filename:      nsc-ircc.h
   4  * Version:
   5  * Description:
   6  * Status:        Experimental.
   7  * Author:        Dag Brattli <dagb@cs.uit.no>
   8  * Created at:    Fri Nov 13 14:37:40 1998
   9  * Modified at:   Sun Jan 23 17:47:00 2000
  10  * Modified by:   Dag Brattli <dagb@cs.uit.no>
  11  *
  12  *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
  13  *     Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
  14  *     Copyright (c) 1998 Actisys Corp., www.actisys.com
  15  *     All Rights Reserved
  16  *
  17  *     This program is free software; you can redistribute it and/or
  18  *     modify it under the terms of the GNU General Public License as
  19  *     published by the Free Software Foundation; either version 2 of
  20  *     the License, or (at your option) any later version.
  21  *
  22  *     Neither Dag Brattli nor University of Tromsø admit liability nor
  23  *     provide warranty for any of this software. This material is
  24  *     provided "AS-IS" and at no charge.
  25  *
  26  ********************************************************************/
  27
  28 #ifndef NSC_IRCC_H
  29 #define NSC_IRCC_H
  30
  31 #include <linux/time.h>
  32
  33 #include <linux/spinlock.h>
  34 #include <linux/pm.h>
  35 #include <linux/types.h>
  36 #include <asm/io.h>
  37
  38 /* Features for chips (set in driver_data) */
  39 #define NSC_FORCE_DONGLE_TYPE9  0x00000001
  40
  41 /* DMA modes needed */
  42 #define DMA_TX_MODE     0x08    /* Mem to I/O, ++, demand. */
  43 #define DMA_RX_MODE     0x04    /* I/O to mem, ++, demand. */
  44
  45 /* Config registers for the '108 */
  46 #define CFG_108_BAIC 0x00
  47 #define CFG_108_CSRT 0x01
  48 #define CFG_108_MCTL 0x02
  49
  50 /* Config registers for the '338 */
  51 #define CFG_338_FER  0x00
  52 #define CFG_338_FAR  0x01
  53 #define CFG_338_PTR  0x02
  54 #define CFG_338_PNP0 0x1b
  55 #define CFG_338_PNP1 0x1c
  56 #define CFG_338_PNP3 0x4f
  57
  58 /* Config registers for the '39x (in the logical device bank) */
  59 #define CFG_39X_LDN     0x07    /* Logical device number (Super I/O bank) */
  60 #define CFG_39X_SIOCF1  0x21    /* SuperI/O Config */
  61 #define CFG_39X_ACT     0x30    /* Device activation */
  62 #define CFG_39X_BASEH   0x60    /* Device base address (high bits) */
  63 #define CFG_39X_BASEL   0x61    /* Device base address (low bits) */
  64 #define CFG_39X_IRQNUM  0x70    /* Interrupt number & wake up enable */
  65 #define CFG_39X_IRQSEL  0x71    /* Interrupt select (edge/level + polarity) */
  66 #define CFG_39X_DMA0    0x74    /* DMA 0 configuration */
  67 #define CFG_39X_DMA1    0x75    /* DMA 1 configuration */
  68 #define CFG_39X_SPC     0xF0    /* Serial port configuration register */
  69
  70 /* Flags for configuration register CRF0 */
  71 #define APEDCRC         0x02
  72 #define ENBNKSEL        0x01
  73
  74 /* Set 0 */
  75 #define TXD             0x00 /* Transmit data port */
  76 #define RXD             0x00 /* Receive data port */
  77
  78 /* Register 1 */
  79 #define IER             0x01 /* Interrupt Enable Register*/
  80 #define IER_RXHDL_IE    0x01 /* Receiver high data level interrupt */
  81 #define IER_TXLDL_IE    0x02 /* Transeiver low data level interrupt */
  82 #define IER_LS_IE       0x04//* Link Status Interrupt */
  83 #define IER_ETXURI      0x04 /* Tx underrun */
  84 #define IER_DMA_IE      0x10 /* DMA finished interrupt */
  85 #define IER_TXEMP_IE    0x20
  86 #define IER_SFIF_IE     0x40 /* Frame status FIFO intr */
  87 #define IER_TMR_IE      0x80 /* Timer event */
  88
  89 #define FCR             0x02 /* (write only) */
  90 #define FCR_FIFO_EN     0x01 /* Enable FIFO's */
  91 #define FCR_RXSR        0x02 /* Rx FIFO soft reset */
  92 #define FCR_TXSR        0x04 /* Tx FIFO soft reset */
  93 #define FCR_RXTH        0x40 /* Rx FIFO threshold (set to 16) */
  94 #define FCR_TXTH        0x20 /* Tx FIFO threshold (set to 17) */
  95
  96 #define EIR             0x02 /* (read only) */
  97 #define EIR_RXHDL_EV    0x01
  98 #define EIR_TXLDL_EV    0x02
  99 #define EIR_LS_EV       0x04
 100 #define EIR_DMA_EV      0x10
 101 #define EIR_TXEMP_EV    0x20
 102 #define EIR_SFIF_EV     0x40
 103 #define EIR_TMR_EV      0x80
 104
 105 #define LCR             0x03 /* Link control register */
 106 #define LCR_WLS_8       0x03 /* 8 bits */
 107
 108 #define BSR             0x03 /* Bank select register */
 109 #define BSR_BKSE        0x80
 110 #define BANK0           LCR_WLS_8 /* Must make sure that we set 8N1 */
 111 #define BANK1           0x80
 112 #define BANK2           0xe0
 113 #define BANK3           0xe4
 114 #define BANK4           0xe8
 115 #define BANK5           0xec
 116 #define BANK6           0xf0
 117 #define BANK7           0xf4
 118
 119 #define MCR             0x04 /* Mode Control Register */
 120 #define MCR_MODE_MASK   ~(0xd0)
 121 #define MCR_UART        0x00
 122 #define MCR_RESERVED    0x20
 123 #define MCR_SHARP_IR    0x40
 124 #define MCR_SIR         0x60
 125 #define MCR_MIR         0x80
 126 #define MCR_FIR         0xa0
 127 #define MCR_CEIR        0xb0
 128 #define MCR_IR_PLS      0x10
 129 #define MCR_DMA_EN      0x04
 130 #define MCR_EN_IRQ      0x08
 131 #define MCR_TX_DFR      0x08
 132
 133 #define LSR             0x05 /* Link status register */
 134 #define LSR_RXDA        0x01 /* Receiver data available */
 135 #define LSR_TXRDY       0x20 /* Transmitter ready */
 136 #define LSR_TXEMP       0x40 /* Transmitter empty */
 137
 138 #define ASCR            0x07 /* Auxillary Status and Control Register */
 139 #define ASCR_RXF_TOUT   0x01 /* Rx FIFO timeout */
 140 #define ASCR_FEND_INF   0x02 /* Frame end bytes in rx FIFO */
 141 #define ASCR_S_EOT      0x04 /* Set end of transmission */
 142 #define ASCT_RXBSY      0x20 /* Rx busy */
 143 #define ASCR_TXUR       0x40 /* Transeiver underrun */
 144 #define ASCR_CTE        0x80 /* Clear timer event */
 145
 146 /* Bank 2 */
 147 #define BGDL            0x00 /* Baud Generator Divisor Port (Low Byte) */
 148 #define BGDH            0x01 /* Baud Generator Divisor Port (High Byte) */
 149
 150 #define ECR1            0x02 /* Extended Control Register 1 */
 151 #define ECR1_EXT_SL     0x01 /* Extended Mode Select */
 152 #define ECR1_DMANF      0x02 /* DMA Fairness */
 153 #define ECR1_DMATH      0x04 /* DMA Threshold */
 154 #define ECR1_DMASWP     0x08 /* DMA Swap */
 155
 156 #define EXCR2           0x04
 157 #define EXCR2_TFSIZ     0x01 /* Rx FIFO size = 32 */
 158 #define EXCR2_RFSIZ     0x04 /* Tx FIFO size = 32 */
 159
 160 #define TXFLV           0x06 /* Tx FIFO level */
 161 #define RXFLV           0x07 /* Rx FIFO level */
 162
 163 /* Bank 3 */
 164 #define MID             0x00
 165
 166 /* Bank 4 */
 167 #define TMRL            0x00 /* Timer low byte */
 168 #define TMRH            0x01 /* Timer high byte */
 169 #define IRCR1           0x02 /* Infrared control register 1 */
 170 #define IRCR1_TMR_EN    0x01 /* Timer enable */
 171
 172 #define TFRLL           0x04
 173 #define TFRLH           0x05
 174 #define RFRLL           0x06
 175 #define RFRLH           0x07
 176
 177 /* Bank 5 */
 178 #define IRCR2           0x04 /* Infrared control register 2 */
 179 #define IRCR2_MDRS      0x04 /* MIR data rate select */
 180 #define IRCR2_FEND_MD   0x20 /* */
 181
 182 #define FRM_ST          0x05 /* Frame status FIFO */
 183 #define FRM_ST_VLD      0x80 /* Frame status FIFO data valid */
 184 #define FRM_ST_ERR_MSK  0x5f
 185 #define FRM_ST_LOST_FR  0x40 /* Frame lost */
 186 #define FRM_ST_MAX_LEN  0x10 /* Max frame len exceeded */
 187 #define FRM_ST_PHY_ERR  0x08 /* Physical layer error */
 188 #define FRM_ST_BAD_CRC  0x04
 189 #define FRM_ST_OVR1     0x02 /* Rx FIFO overrun */
 190 #define FRM_ST_OVR2     0x01 /* Frame status FIFO overrun */
 191
 192 #define RFLFL           0x06
 193 #define RFLFH           0x07
 194
 195 /* Bank 6 */
 196 #define IR_CFG2         0x00
 197 #define IR_CFG2_DIS_CRC 0x02
 198
 199 /* Bank 7 */
 200 #define IRM_CR          0x07 /* Infrared module control register */
 201 #define IRM_CR_IRX_MSL  0x40
 202 #define IRM_CR_AF_MNT   0x80 /* Automatic format */
 203
 204 /* NSC chip information */
 205 struct nsc_chip {
 206         char *name;          /* Name of chipset */
 207         int cfg[3];          /* Config registers */
 208         u_int8_t cid_index;  /* Chip identification index reg */
 209         u_int8_t cid_value;  /* Chip identification expected value */
 210         u_int8_t cid_mask;   /* Chip identification revision mask */
 211
 212         /* Functions for probing and initializing the specific chip */
 213         int (*probe)(struct nsc_chip *chip, chipio_t *info);
 214         int (*init)(struct nsc_chip *chip, chipio_t *info);
 215 };
 216 typedef struct nsc_chip nsc_chip_t;
 217
 218 /* For storing entries in the status FIFO */
 219 struct st_fifo_entry {
 220         int status;
 221         int len;
 222 };
 223
 224 #define MAX_TX_WINDOW 7
 225 #define MAX_RX_WINDOW 7
 226
 227 struct st_fifo {
 228         struct st_fifo_entry entries[MAX_RX_WINDOW];
 229         int pending_bytes;
 230         int head;
 231         int tail;
 232         int len;
 233 };
 234
 235 struct frame_cb {
 236         void *start; /* Start of frame in DMA mem */
 237         int len;     /* Length of frame in DMA mem */
 238 };
 239
 240 struct tx_fifo {
 241         struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
 242         int             ptr;                  /* Currently being sent */
 243         int             len;                  /* Length of queue */
 244         int             free;                 /* Next free slot */
 245         void           *tail;                 /* Next free start in DMA mem */
 246 };
 247
 248 /* Private data for each instance */
 249 struct nsc_ircc_cb {
 250         struct st_fifo st_fifo;    /* Info about received frames */
 251         struct tx_fifo tx_fifo;    /* Info about frames to be transmitted */
 252
 253         struct net_device *netdev;     /* Yes! we are some kind of netdevice */
 254
 255         struct irlap_cb *irlap;    /* The link layer we are binded to */
 256         struct qos_info qos;       /* QoS capabilities for this device */
 257
 258         chipio_t io;               /* IrDA controller information */
 259         iobuff_t tx_buff;          /* Transmit buffer */
 260         iobuff_t rx_buff;          /* Receive buffer */
 261         dma_addr_t tx_buff_dma;
 262         dma_addr_t rx_buff_dma;
 263
 264         __u8 ier;                  /* Interrupt enable register */
 265
 266         struct timeval stamp;
 267         struct timeval now;
 268
 269         spinlock_t lock;           /* For serializing operations */
 270
 271         __u32 new_speed;
 272         int index;                 /* Instance index */
 273
 274         struct platform_device *pldev;
 275 };
 276
 277 static inline void switch_bank(int iobase, int bank)
 278 {
 279                 outb(bank, iobase+BSR);
 280 }
 281
 282 #endif /* NSC_IRCC_H */