drivers/net/smc91x.h

   1 /*------------------------------------------------------------------------
   2  . smc91x.h - macros for SMSC's 91C9x/91C1xx single-chip Ethernet device.
   3  .
   4  . Copyright (C) 1996 by Erik Stahlman
   5  . Copyright (C) 2001 Standard Microsystems Corporation
   6  .      Developed by Simple Network Magic Corporation
   7  . Copyright (C) 2003 Monta Vista Software, Inc.
   8  .      Unified SMC91x driver by Nicolas Pitre
   9  .
  10  . This program is free software; you can redistribute it and/or modify
  11  . it under the terms of the GNU General Public License as published by
  12  . the Free Software Foundation; either version 2 of the License, or
  13  . (at your option) any later version.
  14  .
  15  . This program is distributed in the hope that it will be useful,
  16  . but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  . GNU General Public License for more details.
  19  .
  20  . You should have received a copy of the GNU General Public License
  21  . along with this program; if not, write to the Free Software
  22  . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  23  .
  24  . Information contained in this file was obtained from the LAN91C111
  25  . manual from SMC.  To get a copy, if you really want one, you can find
  26  . information under www.smsc.com.
  27  .
  28  . Authors
  29  .      Erik Stahlman           <erik@vt.edu>
  30  .      Daris A Nevil           <dnevil@snmc.com>
  31  .      Nicolas Pitre           <nico@fluxnic.net>
  32  .
  33  ---------------------------------------------------------------------------*/
  34 #ifndef _SMC91X_H_
  35 #define _SMC91X_H_
  36
  37 #include <linux/smc91x.h>
  38
  39 /*
  40  * Define your architecture specific bus configuration parameters here.
  41  */
  42
  43 #if defined(CONFIG_ARCH_LUBBOCK) ||\
  44     defined(CONFIG_MACH_MAINSTONE) ||\
  45     defined(CONFIG_MACH_ZYLONITE) ||\
  46     defined(CONFIG_MACH_LITTLETON) ||\
  47     defined(CONFIG_MACH_ZYLONITE2) ||\
  48     defined(CONFIG_ARCH_VIPER) ||\
  49     defined(CONFIG_MACH_STARGATE2)
  50
  51 #include <asm/mach-types.h>
  52
  53 /* Now the bus width is specified in the platform data
  54  * pretend here to support all I/O access types
  55  */
  56 #define SMC_CAN_USE_8BIT        1
  57 #define SMC_CAN_USE_16BIT       1
  58 #define SMC_CAN_USE_32BIT       1
  59 #define SMC_NOWAIT              1
  60
  61 #define SMC_IO_SHIFT            (lp->io_shift)
  62
  63 #define SMC_inb(a, r)           readb((a) + (r))
  64 #define SMC_inw(a, r)           readw((a) + (r))
  65 #define SMC_inl(a, r)           readl((a) + (r))
  66 #define SMC_outb(v, a, r)       writeb(v, (a) + (r))
  67 #define SMC_outl(v, a, r)       writel(v, (a) + (r))
  68 #define SMC_insw(a, r, p, l)    readsw((a) + (r), p, l)
  69 #define SMC_outsw(a, r, p, l)   writesw((a) + (r), p, l)
  70 #define SMC_insl(a, r, p, l)    readsl((a) + (r), p, l)
  71 #define SMC_outsl(a, r, p, l)   writesl((a) + (r), p, l)
  72 #define SMC_IRQ_FLAGS           (-1)    /* from resource */
  73
  74 /* We actually can't write halfwords properly if not word aligned */
  75 static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
  76 {
  77         if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
  78                 unsigned int v = val << 16;
  79                 v |= readl(ioaddr + (reg & ~2)) & 0xffff;
  80                 writel(v, ioaddr + (reg & ~2));
  81         } else {
  82                 writew(val, ioaddr + reg);
  83         }
  84 }
  85
  86 #elif defined(CONFIG_SA1100_PLEB)
  87 /* We can only do 16-bit reads and writes in the static memory space. */
  88 #define SMC_CAN_USE_8BIT        1
  89 #define SMC_CAN_USE_16BIT       1
  90 #define SMC_CAN_USE_32BIT       0
  91 #define SMC_IO_SHIFT            0
  92 #define SMC_NOWAIT              1
  93
  94 #define SMC_inb(a, r)           readb((a) + (r))
  95 #define SMC_insb(a, r, p, l)    readsb((a) + (r), p, (l))
  96 #define SMC_inw(a, r)           readw((a) + (r))
  97 #define SMC_insw(a, r, p, l)    readsw((a) + (r), p, l)
  98 #define SMC_outb(v, a, r)       writeb(v, (a) + (r))
  99 #define SMC_outsb(a, r, p, l)   writesb((a) + (r), p, (l))
 100 #define SMC_outw(v, a, r)       writew(v, (a) + (r))
 101 #define SMC_outsw(a, r, p, l)   writesw((a) + (r), p, l)
 102
 103 #define SMC_IRQ_FLAGS           (-1)
 104
 105 #elif defined(CONFIG_SA1100_ASSABET)
 106
 107 #include <mach/neponset.h>
 108
 109 /* We can only do 8-bit reads and writes in the static memory space. */
 110 #define SMC_CAN_USE_8BIT        1
 111 #define SMC_CAN_USE_16BIT       0
 112 #define SMC_CAN_USE_32BIT       0
 113 #define SMC_NOWAIT              1
 114
 115 /* The first two address lines aren't connected... */
 116 #define SMC_IO_SHIFT            2
 117
 118 #define SMC_inb(a, r)           readb((a) + (r))
 119 #define SMC_outb(v, a, r)       writeb(v, (a) + (r))
 120 #define SMC_insb(a, r, p, l)    readsb((a) + (r), p, (l))
 121 #define SMC_outsb(a, r, p, l)   writesb((a) + (r), p, (l))
 122 #define SMC_IRQ_FLAGS           (-1)    /* from resource */
 123
 124 #elif   defined(CONFIG_MACH_LOGICPD_PXA270) ||  \
 125         defined(CONFIG_MACH_NOMADIK_8815NHK)
 126
 127 #define SMC_CAN_USE_8BIT        0
 128 #define SMC_CAN_USE_16BIT       1
 129 #define SMC_CAN_USE_32BIT       0
 130 #define SMC_IO_SHIFT            0
 131 #define SMC_NOWAIT              1
 132
 133 #define SMC_inw(a, r)           readw((a) + (r))
 134 #define SMC_outw(v, a, r)       writew(v, (a) + (r))
 135 #define SMC_insw(a, r, p, l)    readsw((a) + (r), p, l)
 136 #define SMC_outsw(a, r, p, l)   writesw((a) + (r), p, l)
 137
 138 #elif   defined(CONFIG_ARCH_INNOKOM) || \
 139         defined(CONFIG_ARCH_PXA_IDP) || \
 140         defined(CONFIG_ARCH_RAMSES) || \
 141         defined(CONFIG_ARCH_PCM027)
 142
 143 #define SMC_CAN_USE_8BIT        1
 144 #define SMC_CAN_USE_16BIT       1
 145 #define SMC_CAN_USE_32BIT       1
 146 #define SMC_IO_SHIFT            0
 147 #define SMC_NOWAIT              1
 148 #define SMC_USE_PXA_DMA         1
 149
 150 #define SMC_inb(a, r)           readb((a) + (r))
 151 #define SMC_inw(a, r)           readw((a) + (r))
 152 #define SMC_inl(a, r)           readl((a) + (r))
 153 #define SMC_outb(v, a, r)       writeb(v, (a) + (r))
 154 #define SMC_outl(v, a, r)       writel(v, (a) + (r))
 155 #define SMC_insl(a, r, p, l)    readsl((a) + (r), p, l)
 156 #define SMC_outsl(a, r, p, l)   writesl((a) + (r), p, l)
 157 #define SMC_IRQ_FLAGS           (-1)    /* from resource */
 158
 159 /* We actually can't write halfwords properly if not word aligned */
 160 static inline void
 161 SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 162 {
 163         if (reg & 2) {
 164                 unsigned int v = val << 16;
 165                 v |= readl(ioaddr + (reg & ~2)) & 0xffff;
 166                 writel(v, ioaddr + (reg & ~2));
 167         } else {
 168                 writew(val, ioaddr + reg);
 169         }
 170 }
 171
 172 #elif   defined(CONFIG_SH_SH4202_MICRODEV)
 173
 174 #define SMC_CAN_USE_8BIT        0
 175 #define SMC_CAN_USE_16BIT       1
 176 #define SMC_CAN_USE_32BIT       0
 177
 178 #define SMC_inb(a, r)           inb((a) + (r) - 0xa0000000)
 179 #define SMC_inw(a, r)           inw((a) + (r) - 0xa0000000)
 180 #define SMC_inl(a, r)           inl((a) + (r) - 0xa0000000)
 181 #define SMC_outb(v, a, r)       outb(v, (a) + (r) - 0xa0000000)
 182 #define SMC_outw(v, a, r)       outw(v, (a) + (r) - 0xa0000000)
 183 #define SMC_outl(v, a, r)       outl(v, (a) + (r) - 0xa0000000)
 184 #define SMC_insl(a, r, p, l)    insl((a) + (r) - 0xa0000000, p, l)
 185 #define SMC_outsl(a, r, p, l)   outsl((a) + (r) - 0xa0000000, p, l)
 186 #define SMC_insw(a, r, p, l)    insw((a) + (r) - 0xa0000000, p, l)
 187 #define SMC_outsw(a, r, p, l)   outsw((a) + (r) - 0xa0000000, p, l)
 188
 189 #define SMC_IRQ_FLAGS           (0)
 190
 191 #elif   defined(CONFIG_M32R)
 192
 193 #define SMC_CAN_USE_8BIT        0
 194 #define SMC_CAN_USE_16BIT       1
 195 #define SMC_CAN_USE_32BIT       0
 196
 197 #define SMC_inb(a, r)           inb(((u32)a) + (r))
 198 #define SMC_inw(a, r)           inw(((u32)a) + (r))
 199 #define SMC_outb(v, a, r)       outb(v, ((u32)a) + (r))
 200 #define SMC_outw(v, a, r)       outw(v, ((u32)a) + (r))
 201 #define SMC_insw(a, r, p, l)    insw(((u32)a) + (r), p, l)
 202 #define SMC_outsw(a, r, p, l)   outsw(((u32)a) + (r), p, l)
 203
 204 #define SMC_IRQ_FLAGS           (0)
 205
 206 #define RPC_LSA_DEFAULT         RPC_LED_TX_RX
 207 #define RPC_LSB_DEFAULT         RPC_LED_100_10
 208
 209 #elif   defined(CONFIG_ARCH_VERSATILE)
 210
 211 #define SMC_CAN_USE_8BIT        1
 212 #define SMC_CAN_USE_16BIT       1
 213 #define SMC_CAN_USE_32BIT       1
 214 #define SMC_NOWAIT              1
 215
 216 #define SMC_inb(a, r)           readb((a) + (r))
 217 #define SMC_inw(a, r)           readw((a) + (r))
 218 #define SMC_inl(a, r)           readl((a) + (r))
 219 #define SMC_outb(v, a, r)       writeb(v, (a) + (r))
 220 #define SMC_outw(v, a, r)       writew(v, (a) + (r))
 221 #define SMC_outl(v, a, r)       writel(v, (a) + (r))
 222 #define SMC_insl(a, r, p, l)    readsl((a) + (r), p, l)
 223 #define SMC_outsl(a, r, p, l)   writesl((a) + (r), p, l)
 224 #define SMC_IRQ_FLAGS           (-1)    /* from resource */
 225
 226 #elif defined(CONFIG_MN10300)
 227
 228 /*
 229  * MN10300/AM33 configuration
 230  */
 231
 232 #include <unit/smc91111.h>
 233
 234 #elif defined(CONFIG_ARCH_MSM)
 235
 236 #define SMC_CAN_USE_8BIT        0
 237 #define SMC_CAN_USE_16BIT       1
 238 #define SMC_CAN_USE_32BIT       0
 239 #define SMC_NOWAIT              1
 240
 241 #define SMC_inw(a, r)           readw((a) + (r))
 242 #define SMC_outw(v, a, r)       writew(v, (a) + (r))
 243 #define SMC_insw(a, r, p, l)    readsw((a) + (r), p, l)
 244 #define SMC_outsw(a, r, p, l)   writesw((a) + (r), p, l)
 245
 246 #define SMC_IRQ_FLAGS           IRQF_TRIGGER_HIGH
 247
 248 #elif defined(CONFIG_COLDFIRE)
 249
 250 #define SMC_CAN_USE_8BIT        0
 251 #define SMC_CAN_USE_16BIT       1
 252 #define SMC_CAN_USE_32BIT       0
 253 #define SMC_NOWAIT              1
 254
 255 static inline void mcf_insw(void *a, unsigned char *p, int l)
 256 {
 257         u16 *wp = (u16 *) p;
 258         while (l-- > 0)
 259                 *wp++ = readw(a);
 260 }
 261
 262 static inline void mcf_outsw(void *a, unsigned char *p, int l)
 263 {
 264         u16 *wp = (u16 *) p;
 265         while (l-- > 0)
 266                 writew(*wp++, a);
 267 }
 268
 269 #define SMC_inw(a, r)           _swapw(readw((a) + (r)))
 270 #define SMC_outw(v, a, r)       writew(_swapw(v), (a) + (r))
 271 #define SMC_insw(a, r, p, l)    mcf_insw(a + r, p, l)
 272 #define SMC_outsw(a, r, p, l)   mcf_outsw(a + r, p, l)
 273
 274 #define SMC_IRQ_FLAGS           (IRQF_DISABLED)
 275
 276 #else
 277
 278 /*
 279  * Default configuration
 280  */
 281
 282 #define SMC_CAN_USE_8BIT        1
 283 #define SMC_CAN_USE_16BIT       1
 284 #define SMC_CAN_USE_32BIT       1
 285 #define SMC_NOWAIT              1
 286
 287 #define SMC_IO_SHIFT            (lp->io_shift)
 288
 289 #define SMC_inb(a, r)           readb((a) + (r))
 290 #define SMC_inw(a, r)           readw((a) + (r))
 291 #define SMC_inl(a, r)           readl((a) + (r))
 292 #define SMC_outb(v, a, r)       writeb(v, (a) + (r))
 293 #define SMC_outw(v, a, r)       writew(v, (a) + (r))
 294 #define SMC_outl(v, a, r)       writel(v, (a) + (r))
 295 #define SMC_insw(a, r, p, l)    readsw((a) + (r), p, l)
 296 #define SMC_outsw(a, r, p, l)   writesw((a) + (r), p, l)
 297 #define SMC_insl(a, r, p, l)    readsl((a) + (r), p, l)
 298 #define SMC_outsl(a, r, p, l)   writesl((a) + (r), p, l)
 299
 300 #define RPC_LSA_DEFAULT         RPC_LED_100_10
 301 #define RPC_LSB_DEFAULT         RPC_LED_TX_RX
 302
 303 #endif
 304
 305
 306 /* store this information for the driver.. */
 307 struct smc_local {
 308         /*
 309          * If I have to wait until memory is available to send a
 310          * packet, I will store the skbuff here, until I get the
 311          * desired memory.  Then, I'll send it out and free it.
 312          */
 313         struct sk_buff *pending_tx_skb;
 314         struct tasklet_struct tx_task;
 315
 316         /* version/revision of the SMC91x chip */
 317         int     version;
 318
 319         /* Contains the current active transmission mode */
 320         int     tcr_cur_mode;
 321
 322         /* Contains the current active receive mode */
 323         int     rcr_cur_mode;
 324
 325         /* Contains the current active receive/phy mode */
 326         int     rpc_cur_mode;
 327         int     ctl_rfduplx;
 328         int     ctl_rspeed;
 329
 330         u32     msg_enable;
 331         u32     phy_type;
 332         struct mii_if_info mii;
 333
 334         /* work queue */
 335         struct work_struct phy_configure;
 336         struct net_device *dev;
 337         int     work_pending;
 338
 339         spinlock_t lock;
 340
 341 #ifdef CONFIG_ARCH_PXA
 342         /* DMA needs the physical address of the chip */
 343         u_long physaddr;
 344         struct device *device;
 345 #endif
 346         void __iomem *base;
 347         void __iomem *datacs;
 348
 349         /* the low address lines on some platforms aren't connected... */
 350         int     io_shift;
 351
 352         struct smc91x_platdata cfg;
 353 };
 354
 355 #define SMC_8BIT(p)     ((p)->cfg.flags & SMC91X_USE_8BIT)
 356 #define SMC_16BIT(p)    ((p)->cfg.flags & SMC91X_USE_16BIT)
 357 #define SMC_32BIT(p)    ((p)->cfg.flags & SMC91X_USE_32BIT)
 358
 359 #ifdef CONFIG_ARCH_PXA
 360 /*
 361  * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
 362  * always happening in irq context so no need to worry about races.  TX is
 363  * different and probably not worth it for that reason, and not as critical
 364  * as RX which can overrun memory and lose packets.
 365  */
 366 #include <linux/dma-mapping.h>
 367 #include <mach/dma.h>
 368
 369 #ifdef SMC_insl
 370 #undef SMC_insl
 371 #define SMC_insl(a, r, p, l) \
 372         smc_pxa_dma_insl(a, lp, r, dev->dma, p, l)
 373 static inline void
 374 smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
 375                  u_char *buf, int len)
 376 {
 377         u_long physaddr = lp->physaddr;
 378         dma_addr_t dmabuf;
 379
 380         /* fallback if no DMA available */
 381         if (dma == (unsigned char)-1) {
 382                 readsl(ioaddr + reg, buf, len);
 383                 return;
 384         }
 385
 386         /* 64 bit alignment is required for memory to memory DMA */
 387         if ((long)buf & 4) {
 388                 *((u32 *)buf) = SMC_inl(ioaddr, reg);
 389                 buf += 4;
 390                 len--;
 391         }
 392
 393         len *= 4;
 394         dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
 395         DCSR(dma) = DCSR_NODESC;
 396         DTADR(dma) = dmabuf;
 397         DSADR(dma) = physaddr + reg;
 398         DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
 399                      DCMD_WIDTH4 | (DCMD_LENGTH & len));
 400         DCSR(dma) = DCSR_NODESC | DCSR_RUN;
 401         while (!(DCSR(dma) & DCSR_STOPSTATE))
 402                 cpu_relax();
 403         DCSR(dma) = 0;
 404         dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
 405 }
 406 #endif
 407
 408 #ifdef SMC_insw
 409 #undef SMC_insw
 410 #define SMC_insw(a, r, p, l) \
 411         smc_pxa_dma_insw(a, lp, r, dev->dma, p, l)
 412 static inline void
 413 smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
 414                  u_char *buf, int len)
 415 {
 416         u_long physaddr = lp->physaddr;
 417         dma_addr_t dmabuf;
 418
 419         /* fallback if no DMA available */
 420         if (dma == (unsigned char)-1) {
 421                 readsw(ioaddr + reg, buf, len);
 422                 return;
 423         }
 424
 425         /* 64 bit alignment is required for memory to memory DMA */
 426         while ((long)buf & 6) {
 427                 *((u16 *)buf) = SMC_inw(ioaddr, reg);
 428                 buf += 2;
 429                 len--;
 430         }
 431
 432         len *= 2;
 433         dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
 434         DCSR(dma) = DCSR_NODESC;
 435         DTADR(dma) = dmabuf;
 436         DSADR(dma) = physaddr + reg;
 437         DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
 438                      DCMD_WIDTH2 | (DCMD_LENGTH & len));
 439         DCSR(dma) = DCSR_NODESC | DCSR_RUN;
 440         while (!(DCSR(dma) & DCSR_STOPSTATE))
 441                 cpu_relax();
 442         DCSR(dma) = 0;
 443         dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
 444 }
 445 #endif
 446
 447 static void
 448 smc_pxa_dma_irq(int dma, void *dummy)
 449 {
 450         DCSR(dma) = 0;
 451 }
 452 #endif  /* CONFIG_ARCH_PXA */
 453
 454
 455 /*
 456  * Everything a particular hardware setup needs should have been defined
 457  * at this point.  Add stubs for the undefined cases, mainly to avoid
 458  * compilation warnings since they'll be optimized away, or to prevent buggy
 459  * use of them.
 460  */
 461
 462 #if ! SMC_CAN_USE_32BIT
 463 #define SMC_inl(ioaddr, reg)            ({ BUG(); 0; })
 464 #define SMC_outl(x, ioaddr, reg)        BUG()
 465 #define SMC_insl(a, r, p, l)            BUG()
 466 #define SMC_outsl(a, r, p, l)           BUG()
 467 #endif
 468
 469 #if !defined(SMC_insl) || !defined(SMC_outsl)
 470 #define SMC_insl(a, r, p, l)            BUG()
 471 #define SMC_outsl(a, r, p, l)           BUG()
 472 #endif
 473
 474 #if ! SMC_CAN_USE_16BIT
 475
 476 /*
 477  * Any 16-bit access is performed with two 8-bit accesses if the hardware
 478  * can't do it directly. Most registers are 16-bit so those are mandatory.
 479  */
 480 #define SMC_outw(x, ioaddr, reg)                                        \
 481         do {                                                            \
 482                 unsigned int __val16 = (x);                             \
 483                 SMC_outb( __val16, ioaddr, reg );                       \
 484                 SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\
 485         } while (0)
 486 #define SMC_inw(ioaddr, reg)                                            \
 487         ({                                                              \
 488                 unsigned int __val16;                                   \
 489                 __val16 =  SMC_inb( ioaddr, reg );                      \
 490                 __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \
 491                 __val16;                                                \
 492         })
 493
 494 #define SMC_insw(a, r, p, l)            BUG()
 495 #define SMC_outsw(a, r, p, l)           BUG()
 496
 497 #endif
 498
 499 #if !defined(SMC_insw) || !defined(SMC_outsw)
 500 #define SMC_insw(a, r, p, l)            BUG()
 501 #define SMC_outsw(a, r, p, l)           BUG()
 502 #endif
 503
 504 #if ! SMC_CAN_USE_8BIT
 505 #define SMC_inb(ioaddr, reg)            ({ BUG(); 0; })
 506 #define SMC_outb(x, ioaddr, reg)        BUG()
 507 #define SMC_insb(a, r, p, l)            BUG()
 508 #define SMC_outsb(a, r, p, l)           BUG()
 509 #endif
 510
 511 #if !defined(SMC_insb) || !defined(SMC_outsb)
 512 #define SMC_insb(a, r, p, l)            BUG()
 513 #define SMC_outsb(a, r, p, l)           BUG()
 514 #endif
 515
 516 #ifndef SMC_CAN_USE_DATACS
 517 #define SMC_CAN_USE_DATACS      0
 518 #endif
 519
 520 #ifndef SMC_IO_SHIFT
 521 #define SMC_IO_SHIFT    0
 522 #endif
 523
 524 #ifndef SMC_IRQ_FLAGS
 525 #define SMC_IRQ_FLAGS           IRQF_TRIGGER_RISING
 526 #endif
 527
 528 #ifndef SMC_INTERRUPT_PREAMBLE
 529 #define SMC_INTERRUPT_PREAMBLE
 530 #endif
 531
 532
 533 /* Because of bank switching, the LAN91x uses only 16 I/O ports */
 534 #define SMC_IO_EXTENT   (16 << SMC_IO_SHIFT)
 535 #define SMC_DATA_EXTENT (4)
 536
 537 /*
 538  . Bank Select Register:
 539  .
 540  .              yyyy yyyy 0000 00xx
 541  .              xx              = bank number
 542  .              yyyy yyyy       = 0x33, for identification purposes.
 543 */
 544 #define BANK_SELECT             (14 << SMC_IO_SHIFT)
 545
 546
 547 // Transmit Control Register
 548 /* BANK 0  */
 549 #define TCR_REG(lp)     SMC_REG(lp, 0x0000, 0)
 550 #define TCR_ENABLE      0x0001  // When 1 we can transmit
 551 #define TCR_LOOP        0x0002  // Controls output pin LBK
 552 #define TCR_FORCOL      0x0004  // When 1 will force a collision
 553 #define TCR_PAD_EN      0x0080  // When 1 will pad tx frames < 64 bytes w/0
 554 #define TCR_NOCRC       0x0100  // When 1 will not append CRC to tx frames
 555 #define TCR_MON_CSN     0x0400  // When 1 tx monitors carrier
 556 #define TCR_FDUPLX      0x0800  // When 1 enables full duplex operation
 557 #define TCR_STP_SQET    0x1000  // When 1 stops tx if Signal Quality Error
 558 #define TCR_EPH_LOOP    0x2000  // When 1 enables EPH block loopback
 559 #define TCR_SWFDUP      0x8000  // When 1 enables Switched Full Duplex mode
 560
 561 #define TCR_CLEAR       0       /* do NOTHING */
 562 /* the default settings for the TCR register : */
 563 #define TCR_DEFAULT     (TCR_ENABLE | TCR_PAD_EN)
 564
 565
 566 // EPH Status Register
 567 /* BANK 0  */
 568 #define EPH_STATUS_REG(lp)      SMC_REG(lp, 0x0002, 0)
 569 #define ES_TX_SUC       0x0001  // Last TX was successful
 570 #define ES_SNGL_COL     0x0002  // Single collision detected for last tx
 571 #define ES_MUL_COL      0x0004  // Multiple collisions detected for last tx
 572 #define ES_LTX_MULT     0x0008  // Last tx was a multicast
 573 #define ES_16COL        0x0010  // 16 Collisions Reached
 574 #define ES_SQET         0x0020  // Signal Quality Error Test
 575 #define ES_LTXBRD       0x0040  // Last tx was a broadcast
 576 #define ES_TXDEFR       0x0080  // Transmit Deferred
 577 #define ES_LATCOL       0x0200  // Late collision detected on last tx
 578 #define ES_LOSTCARR     0x0400  // Lost Carrier Sense
 579 #define ES_EXC_DEF      0x0800  // Excessive Deferral
 580 #define ES_CTR_ROL      0x1000  // Counter Roll Over indication
 581 #define ES_LINK_OK      0x4000  // Driven by inverted value of nLNK pin
 582 #define ES_TXUNRN       0x8000  // Tx Underrun
 583
 584
 585 // Receive Control Register
 586 /* BANK 0  */
 587 #define RCR_REG(lp)             SMC_REG(lp, 0x0004, 0)
 588 #define RCR_RX_ABORT    0x0001  // Set if a rx frame was aborted
 589 #define RCR_PRMS        0x0002  // Enable promiscuous mode
 590 #define RCR_ALMUL       0x0004  // When set accepts all multicast frames
 591 #define RCR_RXEN        0x0100  // IFF this is set, we can receive packets
 592 #define RCR_STRIP_CRC   0x0200  // When set strips CRC from rx packets
 593 #define RCR_ABORT_ENB   0x0200  // When set will abort rx on collision
 594 #define RCR_FILT_CAR    0x0400  // When set filters leading 12 bit s of carrier
 595 #define RCR_SOFTRST     0x8000  // resets the chip
 596
 597 /* the normal settings for the RCR register : */
 598 #define RCR_DEFAULT     (RCR_STRIP_CRC | RCR_RXEN)
 599 #define RCR_CLEAR       0x0     // set it to a base state
 600
 601
 602 // Counter Register
 603 /* BANK 0  */
 604 #define COUNTER_REG(lp) SMC_REG(lp, 0x0006, 0)
 605
 606
 607 // Memory Information Register
 608 /* BANK 0  */
 609 #define MIR_REG(lp)             SMC_REG(lp, 0x0008, 0)
 610
 611
 612 // Receive/Phy Control Register
 613 /* BANK 0  */
 614 #define RPC_REG(lp)             SMC_REG(lp, 0x000A, 0)
 615 #define RPC_SPEED       0x2000  // When 1 PHY is in 100Mbps mode.
 616 #define RPC_DPLX        0x1000  // When 1 PHY is in Full-Duplex Mode
 617 #define RPC_ANEG        0x0800  // When 1 PHY is in Auto-Negotiate Mode
 618 #define RPC_LSXA_SHFT   5       // Bits to shift LS2A,LS1A,LS0A to lsb
 619 #define RPC_LSXB_SHFT   2       // Bits to get LS2B,LS1B,LS0B to lsb
 620
 621 #ifndef RPC_LSA_DEFAULT
 622 #define RPC_LSA_DEFAULT RPC_LED_100
 623 #endif
 624 #ifndef RPC_LSB_DEFAULT
 625 #define RPC_LSB_DEFAULT RPC_LED_FD
 626 #endif
 627
 628 #define RPC_DEFAULT (RPC_ANEG | RPC_SPEED | RPC_DPLX)
 629
 630
 631 /* Bank 0 0x0C is reserved */
 632
 633 // Bank Select Register
 634 /* All Banks */
 635 #define BSR_REG         0x000E
 636
 637
 638 // Configuration Reg
 639 /* BANK 1 */
 640 #define CONFIG_REG(lp)  SMC_REG(lp, 0x0000,     1)
 641 #define CONFIG_EXT_PHY  0x0200  // 1=external MII, 0=internal Phy
 642 #define CONFIG_GPCNTRL  0x0400  // Inverse value drives pin nCNTRL
 643 #define CONFIG_NO_WAIT  0x1000  // When 1 no extra wait states on ISA bus
 644 #define CONFIG_EPH_POWER_EN 0x8000 // When 0 EPH is placed into low power mode.
 645
 646 // Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low
 647 #define CONFIG_DEFAULT  (CONFIG_EPH_POWER_EN)
 648
 649
 650 // Base Address Register
 651 /* BANK 1 */
 652 #define BASE_REG(lp)    SMC_REG(lp, 0x0002, 1)
 653
 654
 655 // Individual Address Registers
 656 /* BANK 1 */
 657 #define ADDR0_REG(lp)   SMC_REG(lp, 0x0004, 1)
 658 #define ADDR1_REG(lp)   SMC_REG(lp, 0x0006, 1)
 659 #define ADDR2_REG(lp)   SMC_REG(lp, 0x0008, 1)
 660
 661
 662 // General Purpose Register
 663 /* BANK 1 */
 664 #define GP_REG(lp)              SMC_REG(lp, 0x000A, 1)
 665
 666
 667 // Control Register
 668 /* BANK 1 */
 669 #define CTL_REG(lp)             SMC_REG(lp, 0x000C, 1)
 670 #define CTL_RCV_BAD     0x4000 // When 1 bad CRC packets are received
 671 #define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically
 672 #define CTL_LE_ENABLE   0x0080 // When 1 enables Link Error interrupt
 673 #define CTL_CR_ENABLE   0x0040 // When 1 enables Counter Rollover interrupt
 674 #define CTL_TE_ENABLE   0x0020 // When 1 enables Transmit Error interrupt
 675 #define CTL_EEPROM_SELECT 0x0004 // Controls EEPROM reload & store
 676 #define CTL_RELOAD      0x0002 // When set reads EEPROM into registers
 677 #define CTL_STORE       0x0001 // When set stores registers into EEPROM
 678
 679
 680 // MMU Command Register
 681 /* BANK 2 */
 682 #define MMU_CMD_REG(lp) SMC_REG(lp, 0x0000, 2)
 683 #define MC_BUSY         1       // When 1 the last release has not completed
 684 #define MC_NOP          (0<<5)  // No Op
 685 #define MC_ALLOC        (1<<5)  // OR with number of 256 byte packets
 686 #define MC_RESET        (2<<5)  // Reset MMU to initial state
 687 #define MC_REMOVE       (3<<5)  // Remove the current rx packet
 688 #define MC_RELEASE      (4<<5)  // Remove and release the current rx packet
 689 #define MC_FREEPKT      (5<<5)  // Release packet in PNR register
 690 #define MC_ENQUEUE      (6<<5)  // Enqueue the packet for transmit
 691 #define MC_RSTTXFIFO    (7<<5)  // Reset the TX FIFOs
 692
 693
 694 // Packet Number Register
 695 /* BANK 2 */
 696 #define PN_REG(lp)              SMC_REG(lp, 0x0002, 2)
 697
 698
 699 // Allocation Result Register
 700 /* BANK 2 */
 701 #define AR_REG(lp)              SMC_REG(lp, 0x0003, 2)
 702 #define AR_FAILED       0x80    // Alocation Failed
 703
 704
 705 // TX FIFO Ports Register
 706 /* BANK 2 */
 707 #define TXFIFO_REG(lp)  SMC_REG(lp, 0x0004, 2)
 708 #define TXFIFO_TEMPTY   0x80    // TX FIFO Empty
 709
 710 // RX FIFO Ports Register
 711 /* BANK 2 */
 712 #define RXFIFO_REG(lp)  SMC_REG(lp, 0x0005, 2)
 713 #define RXFIFO_REMPTY   0x80    // RX FIFO Empty
 714
 715 #define FIFO_REG(lp)    SMC_REG(lp, 0x0004, 2)
 716
 717 // Pointer Register
 718 /* BANK 2 */
 719 #define PTR_REG(lp)             SMC_REG(lp, 0x0006, 2)
 720 #define PTR_RCV         0x8000 // 1=Receive area, 0=Transmit area
 721 #define PTR_AUTOINC     0x4000 // Auto increment the pointer on each access
 722 #define PTR_READ        0x2000 // When 1 the operation is a read
 723
 724
 725 // Data Register
 726 /* BANK 2 */
 727 #define DATA_REG(lp)    SMC_REG(lp, 0x0008, 2)
 728
 729
 730 // Interrupt Status/Acknowledge Register
 731 /* BANK 2 */
 732 #define INT_REG(lp)             SMC_REG(lp, 0x000C, 2)
 733
 734
 735 // Interrupt Mask Register
 736 /* BANK 2 */
 737 #define IM_REG(lp)              SMC_REG(lp, 0x000D, 2)
 738 #define IM_MDINT        0x80 // PHY MI Register 18 Interrupt
 739 #define IM_ERCV_INT     0x40 // Early Receive Interrupt
 740 #define IM_EPH_INT      0x20 // Set by Ethernet Protocol Handler section
 741 #define IM_RX_OVRN_INT  0x10 // Set by Receiver Overruns
 742 #define IM_ALLOC_INT    0x08 // Set when allocation request is completed
 743 #define IM_TX_EMPTY_INT 0x04 // Set if the TX FIFO goes empty
 744 #define IM_TX_INT       0x02 // Transmit Interrupt
 745 #define IM_RCV_INT      0x01 // Receive Interrupt
 746
 747
 748 // Multicast Table Registers
 749 /* BANK 3 */
 750 #define MCAST_REG1(lp)  SMC_REG(lp, 0x0000, 3)
 751 #define MCAST_REG2(lp)  SMC_REG(lp, 0x0002, 3)
 752 #define MCAST_REG3(lp)  SMC_REG(lp, 0x0004, 3)
 753 #define MCAST_REG4(lp)  SMC_REG(lp, 0x0006, 3)
 754
 755
 756 // Management Interface Register (MII)
 757 /* BANK 3 */
 758 #define MII_REG(lp)             SMC_REG(lp, 0x0008, 3)
 759 #define MII_MSK_CRS100  0x4000 // Disables CRS100 detection during tx half dup
 760 #define MII_MDOE        0x0008 // MII Output Enable
 761 #define MII_MCLK        0x0004 // MII Clock, pin MDCLK
 762 #define MII_MDI         0x0002 // MII Input, pin MDI
 763 #define MII_MDO         0x0001 // MII Output, pin MDO
 764
 765
 766 // Revision Register
 767 /* BANK 3 */
 768 /* ( hi: chip id   low: rev # ) */
 769 #define REV_REG(lp)             SMC_REG(lp, 0x000A, 3)
 770
 771
 772 // Early RCV Register
 773 /* BANK 3 */
 774 /* this is NOT on SMC9192 */
 775 #define ERCV_REG(lp)    SMC_REG(lp, 0x000C, 3)
 776 #define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received
 777 #define ERCV_THRESHOLD  0x001F // ERCV Threshold Mask
 778
 779
 780 // External Register
 781 /* BANK 7 */
 782 #define EXT_REG(lp)             SMC_REG(lp, 0x0000, 7)
 783
 784
 785 #define CHIP_9192       3
 786 #define CHIP_9194       4
 787 #define CHIP_9195       5
 788 #define CHIP_9196       6
 789 #define CHIP_91100      7
 790 #define CHIP_91100FD    8
 791 #define CHIP_91111FD    9
 792
 793 static const char * chip_ids[ 16 ] =  {
 794         NULL, NULL, NULL,
 795         /* 3 */ "SMC91C90/91C92",
 796         /* 4 */ "SMC91C94",
 797         /* 5 */ "SMC91C95",
 798         /* 6 */ "SMC91C96",
 799         /* 7 */ "SMC91C100",
 800         /* 8 */ "SMC91C100FD",
 801         /* 9 */ "SMC91C11xFD",
 802         NULL, NULL, NULL,
 803         NULL, NULL, NULL};
 804
 805
 806 /*
 807  . Receive status bits
 808 */
 809 #define RS_ALGNERR      0x8000
 810 #define RS_BRODCAST     0x4000
 811 #define RS_BADCRC       0x2000
 812 #define RS_ODDFRAME     0x1000
 813 #define RS_TOOLONG      0x0800
 814 #define RS_TOOSHORT     0x0400
 815 #define RS_MULTICAST    0x0001
 816 #define RS_ERRORS       (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
 817
 818
 819 /*
 820  * PHY IDs
 821  *  LAN83C183 == LAN91C111 Internal PHY
 822  */
 823 #define PHY_LAN83C183   0x0016f840
 824 #define PHY_LAN83C180   0x02821c50
 825
 826 /*
 827  * PHY Register Addresses (LAN91C111 Internal PHY)
 828  *
 829  * Generic PHY registers can be found in <linux/mii.h>
 830  *
 831  * These phy registers are specific to our on-board phy.
 832  */
 833
 834 // PHY Configuration Register 1
 835 #define PHY_CFG1_REG            0x10
 836 #define PHY_CFG1_LNKDIS         0x8000  // 1=Rx Link Detect Function disabled
 837 #define PHY_CFG1_XMTDIS         0x4000  // 1=TP Transmitter Disabled
 838 #define PHY_CFG1_XMTPDN         0x2000  // 1=TP Transmitter Powered Down
 839 #define PHY_CFG1_BYPSCR         0x0400  // 1=Bypass scrambler/descrambler
 840 #define PHY_CFG1_UNSCDS         0x0200  // 1=Unscramble Idle Reception Disable
 841 #define PHY_CFG1_EQLZR          0x0100  // 1=Rx Equalizer Disabled
 842 #define PHY_CFG1_CABLE          0x0080  // 1=STP(150ohm), 0=UTP(100ohm)
 843 #define PHY_CFG1_RLVL0          0x0040  // 1=Rx Squelch level reduced by 4.5db
 844 #define PHY_CFG1_TLVL_SHIFT     2       // Transmit Output Level Adjust
 845 #define PHY_CFG1_TLVL_MASK      0x003C
 846 #define PHY_CFG1_TRF_MASK       0x0003  // Transmitter Rise/Fall time
 847
 848
 849 // PHY Configuration Register 2
 850 #define PHY_CFG2_REG            0x11
 851 #define PHY_CFG2_APOLDIS        0x0020  // 1=Auto Polarity Correction disabled
 852 #define PHY_CFG2_JABDIS         0x0010  // 1=Jabber disabled
 853 #define PHY_CFG2_MREG           0x0008  // 1=Multiple register access (MII mgt)
 854 #define PHY_CFG2_INTMDIO        0x0004  // 1=Interrupt signaled with MDIO pulseo
 855
 856 // PHY Status Output (and Interrupt status) Register
 857 #define PHY_INT_REG             0x12    // Status Output (Interrupt Status)
 858 #define PHY_INT_INT             0x8000  // 1=bits have changed since last read
 859 #define PHY_INT_LNKFAIL         0x4000  // 1=Link Not detected
 860 #define PHY_INT_LOSSSYNC        0x2000  // 1=Descrambler has lost sync
 861 #define PHY_INT_CWRD            0x1000  // 1=Invalid 4B5B code detected on rx
 862 #define PHY_INT_SSD             0x0800  // 1=No Start Of Stream detected on rx
 863 #define PHY_INT_ESD             0x0400  // 1=No End Of Stream detected on rx
 864 #define PHY_INT_RPOL            0x0200  // 1=Reverse Polarity detected
 865 #define PHY_INT_JAB             0x0100  // 1=Jabber detected
 866 #define PHY_INT_SPDDET          0x0080  // 1=100Base-TX mode, 0=10Base-T mode
 867 #define PHY_INT_DPLXDET         0x0040  // 1=Device in Full Duplex
 868
 869 // PHY Interrupt/Status Mask Register
 870 #define PHY_MASK_REG            0x13    // Interrupt Mask
 871 // Uses the same bit definitions as PHY_INT_REG
 872
 873
 874 /*
 875  * SMC91C96 ethernet config and status registers.
 876  * These are in the "attribute" space.
 877  */
 878 #define ECOR                    0x8000
 879 #define ECOR_RESET              0x80
 880 #define ECOR_LEVEL_IRQ          0x40
 881 #define ECOR_WR_ATTRIB          0x04
 882 #define ECOR_ENABLE             0x01
 883
 884 #define ECSR                    0x8002
 885 #define ECSR_IOIS8              0x20
 886 #define ECSR_PWRDWN             0x04
 887 #define ECSR_INT                0x02
 888
 889 #define ATTRIB_SIZE             ((64*1024) << SMC_IO_SHIFT)
 890
 891
 892 /*
 893  * Macros to abstract register access according to the data bus
 894  * capabilities.  Please use those and not the in/out primitives.
 895  * Note: the following macros do *not* select the bank -- this must
 896  * be done separately as needed in the main code.  The SMC_REG() macro
 897  * only uses the bank argument for debugging purposes (when enabled).
 898  *
 899  * Note: despite inline functions being safer, everything leading to this
 900  * should preferably be macros to let BUG() display the line number in
 901  * the core source code since we're interested in the top call site
 902  * not in any inline function location.
 903  */
 904
 905 #if SMC_DEBUG > 0
 906 #define SMC_REG(lp, reg, bank)                                  \
 907         ({                                                              \
 908                 int __b = SMC_CURRENT_BANK(lp);                 \
 909                 if (unlikely((__b & ~0xf0) != (0x3300 | bank))) {       \
 910                         printk( "%s: bank reg screwed (0x%04x)\n",      \
 911                                 CARDNAME, __b );                        \
 912                         BUG();                                          \
 913                 }                                                       \
 914                 reg<<SMC_IO_SHIFT;                                      \
 915         })
 916 #else
 917 #define SMC_REG(lp, reg, bank)  (reg<<SMC_IO_SHIFT)
 918 #endif
 919
 920 /*
 921  * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not
 922  * aligned to a 32 bit boundary.  I tell you that does exist!
 923  * Fortunately the affected register accesses can be easily worked around
 924  * since we can write zeroes to the preceeding 16 bits without adverse
 925  * effects and use a 32-bit access.
 926  *
 927  * Enforce it on any 32-bit capable setup for now.
 928  */
 929 #define SMC_MUST_ALIGN_WRITE(lp)        SMC_32BIT(lp)
 930
 931 #define SMC_GET_PN(lp)                                          \
 932         (SMC_8BIT(lp)   ? (SMC_inb(ioaddr, PN_REG(lp))) \
 933                                 : (SMC_inw(ioaddr, PN_REG(lp)) & 0xFF))
 934
 935 #define SMC_SET_PN(lp, x)                                               \
 936         do {                                                            \
 937                 if (SMC_MUST_ALIGN_WRITE(lp))                           \
 938                         SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 0, 2));   \
 939                 else if (SMC_8BIT(lp))                          \
 940                         SMC_outb(x, ioaddr, PN_REG(lp));                \
 941                 else                                                    \
 942                         SMC_outw(x, ioaddr, PN_REG(lp));                \
 943         } while (0)
 944
 945 #define SMC_GET_AR(lp)                                          \
 946         (SMC_8BIT(lp)   ? (SMC_inb(ioaddr, AR_REG(lp))) \
 947                                 : (SMC_inw(ioaddr, PN_REG(lp)) >> 8))
 948
 949 #define SMC_GET_TXFIFO(lp)                                              \
 950         (SMC_8BIT(lp)   ? (SMC_inb(ioaddr, TXFIFO_REG(lp)))     \
 951                                 : (SMC_inw(ioaddr, TXFIFO_REG(lp)) & 0xFF))
 952
 953 #define SMC_GET_RXFIFO(lp)                                              \
 954         (SMC_8BIT(lp)   ? (SMC_inb(ioaddr, RXFIFO_REG(lp)))     \
 955                                 : (SMC_inw(ioaddr, TXFIFO_REG(lp)) >> 8))
 956
 957 #define SMC_GET_INT(lp)                                         \
 958         (SMC_8BIT(lp)   ? (SMC_inb(ioaddr, INT_REG(lp)))        \
 959                                 : (SMC_inw(ioaddr, INT_REG(lp)) & 0xFF))
 960
 961 #define SMC_ACK_INT(lp, x)                                              \
 962         do {                                                            \
 963                 if (SMC_8BIT(lp))                                       \
 964                         SMC_outb(x, ioaddr, INT_REG(lp));               \
 965                 else {                                                  \
 966                         unsigned long __flags;                          \
 967                         int __mask;                                     \
 968                         local_irq_save(__flags);                        \
 969                         __mask = SMC_inw(ioaddr, INT_REG(lp)) & ~0xff; \
 970                         SMC_outw(__mask | (x), ioaddr, INT_REG(lp));    \
 971                         local_irq_restore(__flags);                     \
 972                 }                                                       \
 973         } while (0)
 974
 975 #define SMC_GET_INT_MASK(lp)                                            \
 976         (SMC_8BIT(lp)   ? (SMC_inb(ioaddr, IM_REG(lp))) \
 977                                 : (SMC_inw(ioaddr, INT_REG(lp)) >> 8))
 978
 979 #define SMC_SET_INT_MASK(lp, x)                                 \
 980         do {                                                            \
 981                 if (SMC_8BIT(lp))                                       \
 982                         SMC_outb(x, ioaddr, IM_REG(lp));                \
 983                 else                                                    \
 984                         SMC_outw((x) << 8, ioaddr, INT_REG(lp));        \
 985         } while (0)
 986
 987 #define SMC_CURRENT_BANK(lp)    SMC_inw(ioaddr, BANK_SELECT)
 988
 989 #define SMC_SELECT_BANK(lp, x)                                  \
 990         do {                                                            \
 991                 if (SMC_MUST_ALIGN_WRITE(lp))                           \
 992                         SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT);    \
 993                 else                                                    \
 994                         SMC_outw(x, ioaddr, BANK_SELECT);               \
 995         } while (0)
 996
 997 #define SMC_GET_BASE(lp)                SMC_inw(ioaddr, BASE_REG(lp))
 998
 999 #define SMC_SET_BASE(lp, x)             SMC_outw(x, ioaddr, BASE_REG(lp))
1000
1001 #define SMC_GET_CONFIG(lp)      SMC_inw(ioaddr, CONFIG_REG(lp))
1002
1003 #define SMC_SET_CONFIG(lp, x)   SMC_outw(x, ioaddr, CONFIG_REG(lp))
1004
1005 #define SMC_GET_COUNTER(lp)     SMC_inw(ioaddr, COUNTER_REG(lp))
1006
1007 #define SMC_GET_CTL(lp)         SMC_inw(ioaddr, CTL_REG(lp))
1008
1009 #define SMC_SET_CTL(lp, x)              SMC_outw(x, ioaddr, CTL_REG(lp))
1010
1011 #define SMC_GET_MII(lp)         SMC_inw(ioaddr, MII_REG(lp))
1012
1013 #define SMC_GET_GP(lp)          SMC_inw(ioaddr, GP_REG(lp))
1014
1015 #define SMC_SET_GP(lp, x)                                               \
1016         do {                                                            \
1017                 if (SMC_MUST_ALIGN_WRITE(lp))                           \
1018                         SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 1));   \
1019                 else                                                    \
1020                         SMC_outw(x, ioaddr, GP_REG(lp));                \
1021         } while (0)
1022
1023 #define SMC_SET_MII(lp, x)              SMC_outw(x, ioaddr, MII_REG(lp))
1024
1025 #define SMC_GET_MIR(lp)         SMC_inw(ioaddr, MIR_REG(lp))
1026
1027 #define SMC_SET_MIR(lp, x)              SMC_outw(x, ioaddr, MIR_REG(lp))
1028
1029 #define SMC_GET_MMU_CMD(lp)     SMC_inw(ioaddr, MMU_CMD_REG(lp))
1030
1031 #define SMC_SET_MMU_CMD(lp, x)  SMC_outw(x, ioaddr, MMU_CMD_REG(lp))
1032
1033 #define SMC_GET_FIFO(lp)                SMC_inw(ioaddr, FIFO_REG(lp))
1034
1035 #define SMC_GET_PTR(lp)         SMC_inw(ioaddr, PTR_REG(lp))
1036
1037 #define SMC_SET_PTR(lp, x)                                              \
1038         do {                                                            \
1039                 if (SMC_MUST_ALIGN_WRITE(lp))                           \
1040                         SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 4, 2));   \
1041                 else                                                    \
1042                         SMC_outw(x, ioaddr, PTR_REG(lp));               \
1043         } while (0)
1044
1045 #define SMC_GET_EPH_STATUS(lp)  SMC_inw(ioaddr, EPH_STATUS_REG(lp))
1046
1047 #define SMC_GET_RCR(lp)         SMC_inw(ioaddr, RCR_REG(lp))
1048
1049 #define SMC_SET_RCR(lp, x)              SMC_outw(x, ioaddr, RCR_REG(lp))
1050
1051 #define SMC_GET_REV(lp)         SMC_inw(ioaddr, REV_REG(lp))
1052
1053 #define SMC_GET_RPC(lp)         SMC_inw(ioaddr, RPC_REG(lp))
1054
1055 #define SMC_SET_RPC(lp, x)                                              \
1056         do {                                                            \
1057                 if (SMC_MUST_ALIGN_WRITE(lp))                           \
1058                         SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 0));   \
1059                 else                                                    \
1060                         SMC_outw(x, ioaddr, RPC_REG(lp));               \
1061         } while (0)
1062
1063 #define SMC_GET_TCR(lp)         SMC_inw(ioaddr, TCR_REG(lp))
1064
1065 #define SMC_SET_TCR(lp, x)              SMC_outw(x, ioaddr, TCR_REG(lp))
1066
1067 #ifndef SMC_GET_MAC_ADDR
1068 #define SMC_GET_MAC_ADDR(lp, addr)                                      \
1069         do {                                                            \
1070                 unsigned int __v;                                       \
1071                 __v = SMC_inw(ioaddr, ADDR0_REG(lp));                   \
1072                 addr[0] = __v; addr[1] = __v >> 8;                      \
1073                 __v = SMC_inw(ioaddr, ADDR1_REG(lp));                   \
1074                 addr[2] = __v; addr[3] = __v >> 8;                      \
1075                 __v = SMC_inw(ioaddr, ADDR2_REG(lp));                   \
1076                 addr[4] = __v; addr[5] = __v >> 8;                      \
1077         } while (0)
1078 #endif
1079
1080 #define SMC_SET_MAC_ADDR(lp, addr)                                      \
1081         do {                                                            \
1082                 SMC_outw(addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG(lp)); \
1083                 SMC_outw(addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG(lp)); \
1084                 SMC_outw(addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG(lp)); \
1085         } while (0)
1086
1087 #define SMC_SET_MCAST(lp, x)                                            \
1088         do {                                                            \
1089                 const unsigned char *mt = (x);                          \
1090                 SMC_outw(mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \
1091                 SMC_outw(mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \
1092                 SMC_outw(mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \
1093                 SMC_outw(mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \
1094         } while (0)
1095
1096 #define SMC_PUT_PKT_HDR(lp, status, length)                             \
1097         do {                                                            \
1098                 if (SMC_32BIT(lp))                                      \
1099                         SMC_outl((status) | (length)<<16, ioaddr,       \
1100                                  DATA_REG(lp));                 \
1101                 else {                                                  \
1102                         SMC_outw(status, ioaddr, DATA_REG(lp)); \
1103                         SMC_outw(length, ioaddr, DATA_REG(lp)); \
1104                 }                                                       \
1105         } while (0)
1106
1107 #define SMC_GET_PKT_HDR(lp, status, length)                             \
1108         do {                                                            \
1109                 if (SMC_32BIT(lp)) {                            \
1110                         unsigned int __val = SMC_inl(ioaddr, DATA_REG(lp)); \
1111                         (status) = __val & 0xffff;                      \
1112                         (length) = __val >> 16;                         \
1113                 } else {                                                \
1114                         (status) = SMC_inw(ioaddr, DATA_REG(lp));       \
1115                         (length) = SMC_inw(ioaddr, DATA_REG(lp));       \
1116                 }                                                       \
1117         } while (0)
1118
1119 #define SMC_PUSH_DATA(lp, p, l)                                 \
1120         do {                                                            \
1121                 if (SMC_32BIT(lp)) {                            \
1122                         void *__ptr = (p);                              \
1123                         int __len = (l);                                \
1124                         void __iomem *__ioaddr = ioaddr;                \
1125                         if (__len >= 2 && (unsigned long)__ptr & 2) {   \
1126                                 __len -= 2;                             \
1127                                 SMC_outw(*(u16 *)__ptr, ioaddr,         \
1128                                         DATA_REG(lp));          \
1129                                 __ptr += 2;                             \
1130                         }                                               \
1131                         if (SMC_CAN_USE_DATACS && lp->datacs)           \
1132                                 __ioaddr = lp->datacs;                  \
1133                         SMC_outsl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
1134                         if (__len & 2) {                                \
1135                                 __ptr += (__len & ~3);                  \
1136                                 SMC_outw(*((u16 *)__ptr), ioaddr,       \
1137                                          DATA_REG(lp));         \
1138                         }                                               \
1139                 } else if (SMC_16BIT(lp))                               \
1140                         SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1);   \
1141                 else if (SMC_8BIT(lp))                          \
1142                         SMC_outsb(ioaddr, DATA_REG(lp), p, l);  \
1143         } while (0)
1144
1145 #define SMC_PULL_DATA(lp, p, l)                                 \
1146         do {                                                            \
1147                 if (SMC_32BIT(lp)) {                            \
1148                         void *__ptr = (p);                              \
1149                         int __len = (l);                                \
1150                         void __iomem *__ioaddr = ioaddr;                \
1151                         if ((unsigned long)__ptr & 2) {                 \
1152                                 /*                                      \
1153                                  * We want 32bit alignment here.        \
1154                                  * Since some buses perform a full      \
1155                                  * 32bit fetch even for 16bit data      \
1156                                  * we can't use SMC_inw() here.         \
1157                                  * Back both source (on-chip) and       \
1158                                  * destination pointers of 2 bytes.     \
1159                                  * This is possible since the call to   \
1160                                  * SMC_GET_PKT_HDR() already advanced   \
1161                                  * the source pointer of 4 bytes, and   \
1162                                  * the skb_reserve(skb, 2) advanced     \
1163                                  * the destination pointer of 2 bytes.  \
1164                                  */                                     \
1165                                 __ptr -= 2;                             \
1166                                 __len += 2;                             \
1167                                 SMC_SET_PTR(lp,                 \
1168                                         2|PTR_READ|PTR_RCV|PTR_AUTOINC); \
1169                         }                                               \
1170                         if (SMC_CAN_USE_DATACS && lp->datacs)           \
1171                                 __ioaddr = lp->datacs;                  \
1172                         __len += 2;                                     \
1173                         SMC_insl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
1174                 } else if (SMC_16BIT(lp))                               \
1175                         SMC_insw(ioaddr, DATA_REG(lp), p, (l) >> 1);    \
1176                 else if (SMC_8BIT(lp))                          \
1177                         SMC_insb(ioaddr, DATA_REG(lp), p, l);           \
1178         } while (0)
1179
1180 #endif  /* _SMC91X_H_ */