fscache: Fix hanging wait on page discarded by writeback
[linux/fpc-iii.git] / drivers / rtc / rtc-twl.c
blob3472e79f2b1782818ecf0a1f21884ff1e9d79f84
1 /*
2 * rtc-twl.c -- TWL Real Time Clock interface
4 * Copyright (C) 2007 MontaVista Software, Inc
5 * Author: Alexandre Rusev <source@mvista.com>
7 * Based on original TI driver twl4030-rtc.c
8 * Copyright (C) 2006 Texas Instruments, Inc.
10 * Based on rtc-omap.c
11 * Copyright (C) 2003 MontaVista Software, Inc.
12 * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
13 * Copyright (C) 2006 David Brownell
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
23 #include <linux/kernel.h>
24 #include <linux/errno.h>
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/types.h>
28 #include <linux/rtc.h>
29 #include <linux/bcd.h>
30 #include <linux/platform_device.h>
31 #include <linux/interrupt.h>
32 #include <linux/of.h>
34 #include <linux/mfd/twl.h>
36 enum twl_class {
37 TWL_4030 = 0,
38 TWL_6030,
42 * RTC block register offsets (use TWL_MODULE_RTC)
44 enum {
45 REG_SECONDS_REG = 0,
46 REG_MINUTES_REG,
47 REG_HOURS_REG,
48 REG_DAYS_REG,
49 REG_MONTHS_REG,
50 REG_YEARS_REG,
51 REG_WEEKS_REG,
53 REG_ALARM_SECONDS_REG,
54 REG_ALARM_MINUTES_REG,
55 REG_ALARM_HOURS_REG,
56 REG_ALARM_DAYS_REG,
57 REG_ALARM_MONTHS_REG,
58 REG_ALARM_YEARS_REG,
60 REG_RTC_CTRL_REG,
61 REG_RTC_STATUS_REG,
62 REG_RTC_INTERRUPTS_REG,
64 REG_RTC_COMP_LSB_REG,
65 REG_RTC_COMP_MSB_REG,
67 static const u8 twl4030_rtc_reg_map[] = {
68 [REG_SECONDS_REG] = 0x00,
69 [REG_MINUTES_REG] = 0x01,
70 [REG_HOURS_REG] = 0x02,
71 [REG_DAYS_REG] = 0x03,
72 [REG_MONTHS_REG] = 0x04,
73 [REG_YEARS_REG] = 0x05,
74 [REG_WEEKS_REG] = 0x06,
76 [REG_ALARM_SECONDS_REG] = 0x07,
77 [REG_ALARM_MINUTES_REG] = 0x08,
78 [REG_ALARM_HOURS_REG] = 0x09,
79 [REG_ALARM_DAYS_REG] = 0x0A,
80 [REG_ALARM_MONTHS_REG] = 0x0B,
81 [REG_ALARM_YEARS_REG] = 0x0C,
83 [REG_RTC_CTRL_REG] = 0x0D,
84 [REG_RTC_STATUS_REG] = 0x0E,
85 [REG_RTC_INTERRUPTS_REG] = 0x0F,
87 [REG_RTC_COMP_LSB_REG] = 0x10,
88 [REG_RTC_COMP_MSB_REG] = 0x11,
90 static const u8 twl6030_rtc_reg_map[] = {
91 [REG_SECONDS_REG] = 0x00,
92 [REG_MINUTES_REG] = 0x01,
93 [REG_HOURS_REG] = 0x02,
94 [REG_DAYS_REG] = 0x03,
95 [REG_MONTHS_REG] = 0x04,
96 [REG_YEARS_REG] = 0x05,
97 [REG_WEEKS_REG] = 0x06,
99 [REG_ALARM_SECONDS_REG] = 0x08,
100 [REG_ALARM_MINUTES_REG] = 0x09,
101 [REG_ALARM_HOURS_REG] = 0x0A,
102 [REG_ALARM_DAYS_REG] = 0x0B,
103 [REG_ALARM_MONTHS_REG] = 0x0C,
104 [REG_ALARM_YEARS_REG] = 0x0D,
106 [REG_RTC_CTRL_REG] = 0x10,
107 [REG_RTC_STATUS_REG] = 0x11,
108 [REG_RTC_INTERRUPTS_REG] = 0x12,
110 [REG_RTC_COMP_LSB_REG] = 0x13,
111 [REG_RTC_COMP_MSB_REG] = 0x14,
114 /* RTC_CTRL_REG bitfields */
115 #define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01
116 #define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02
117 #define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04
118 #define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08
119 #define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
120 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
121 #define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
122 #define BIT_RTC_CTRL_REG_RTC_V_OPT 0x80
124 /* RTC_STATUS_REG bitfields */
125 #define BIT_RTC_STATUS_REG_RUN_M 0x02
126 #define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04
127 #define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08
128 #define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10
129 #define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20
130 #define BIT_RTC_STATUS_REG_ALARM_M 0x40
131 #define BIT_RTC_STATUS_REG_POWER_UP_M 0x80
133 /* RTC_INTERRUPTS_REG bitfields */
134 #define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03
135 #define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04
136 #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08
139 /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
140 #define ALL_TIME_REGS 6
142 /*----------------------------------------------------------------------*/
143 struct twl_rtc {
144 struct device *dev;
145 struct rtc_device *rtc;
146 u8 *reg_map;
148 * Cache the value for timer/alarm interrupts register; this is
149 * only changed by callers holding rtc ops lock (or resume).
151 unsigned char rtc_irq_bits;
152 bool wake_enabled;
153 #ifdef CONFIG_PM_SLEEP
154 unsigned char irqstat;
155 #endif
156 enum twl_class class;
160 * Supports 1 byte read from TWL RTC register.
162 static int twl_rtc_read_u8(struct twl_rtc *twl_rtc, u8 *data, u8 reg)
164 int ret;
166 ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (twl_rtc->reg_map[reg]));
167 if (ret < 0)
168 pr_err("Could not read TWL register %X - error %d\n", reg, ret);
169 return ret;
173 * Supports 1 byte write to TWL RTC registers.
175 static int twl_rtc_write_u8(struct twl_rtc *twl_rtc, u8 data, u8 reg)
177 int ret;
179 ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (twl_rtc->reg_map[reg]));
180 if (ret < 0)
181 pr_err("Could not write TWL register %X - error %d\n",
182 reg, ret);
183 return ret;
187 * Enable 1/second update and/or alarm interrupts.
189 static int set_rtc_irq_bit(struct twl_rtc *twl_rtc, unsigned char bit)
191 unsigned char val;
192 int ret;
194 /* if the bit is set, return from here */
195 if (twl_rtc->rtc_irq_bits & bit)
196 return 0;
198 val = twl_rtc->rtc_irq_bits | bit;
199 val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
200 ret = twl_rtc_write_u8(twl_rtc, val, REG_RTC_INTERRUPTS_REG);
201 if (ret == 0)
202 twl_rtc->rtc_irq_bits = val;
204 return ret;
208 * Disable update and/or alarm interrupts.
210 static int mask_rtc_irq_bit(struct twl_rtc *twl_rtc, unsigned char bit)
212 unsigned char val;
213 int ret;
215 /* if the bit is clear, return from here */
216 if (!(twl_rtc->rtc_irq_bits & bit))
217 return 0;
219 val = twl_rtc->rtc_irq_bits & ~bit;
220 ret = twl_rtc_write_u8(twl_rtc, val, REG_RTC_INTERRUPTS_REG);
221 if (ret == 0)
222 twl_rtc->rtc_irq_bits = val;
224 return ret;
227 static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
229 struct platform_device *pdev = to_platform_device(dev);
230 struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
231 int irq = platform_get_irq(pdev, 0);
232 int ret;
234 if (enabled) {
235 ret = set_rtc_irq_bit(twl_rtc,
236 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
237 if (device_can_wakeup(dev) && !twl_rtc->wake_enabled) {
238 enable_irq_wake(irq);
239 twl_rtc->wake_enabled = true;
241 } else {
242 ret = mask_rtc_irq_bit(twl_rtc,
243 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
244 if (twl_rtc->wake_enabled) {
245 disable_irq_wake(irq);
246 twl_rtc->wake_enabled = false;
250 return ret;
254 * Gets current TWL RTC time and date parameters.
256 * The RTC's time/alarm representation is not what gmtime(3) requires
257 * Linux to use:
259 * - Months are 1..12 vs Linux 0-11
260 * - Years are 0..99 vs Linux 1900..N (we assume 21st century)
262 static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm)
264 struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
265 unsigned char rtc_data[ALL_TIME_REGS];
266 int ret;
267 u8 save_control;
268 u8 rtc_control;
270 ret = twl_rtc_read_u8(twl_rtc, &save_control, REG_RTC_CTRL_REG);
271 if (ret < 0) {
272 dev_err(dev, "%s: reading CTRL_REG, error %d\n", __func__, ret);
273 return ret;
275 /* for twl6030/32 make sure BIT_RTC_CTRL_REG_GET_TIME_M is clear */
276 if (twl_rtc->class == TWL_6030) {
277 if (save_control & BIT_RTC_CTRL_REG_GET_TIME_M) {
278 save_control &= ~BIT_RTC_CTRL_REG_GET_TIME_M;
279 ret = twl_rtc_write_u8(twl_rtc, save_control,
280 REG_RTC_CTRL_REG);
281 if (ret < 0) {
282 dev_err(dev, "%s clr GET_TIME, error %d\n",
283 __func__, ret);
284 return ret;
289 /* Copy RTC counting registers to static registers or latches */
290 rtc_control = save_control | BIT_RTC_CTRL_REG_GET_TIME_M;
292 /* for twl6030/32 enable read access to static shadowed registers */
293 if (twl_rtc->class == TWL_6030)
294 rtc_control |= BIT_RTC_CTRL_REG_RTC_V_OPT;
296 ret = twl_rtc_write_u8(twl_rtc, rtc_control, REG_RTC_CTRL_REG);
297 if (ret < 0) {
298 dev_err(dev, "%s: writing CTRL_REG, error %d\n", __func__, ret);
299 return ret;
302 ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
303 (twl_rtc->reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
305 if (ret < 0) {
306 dev_err(dev, "%s: reading data, error %d\n", __func__, ret);
307 return ret;
310 /* for twl6030 restore original state of rtc control register */
311 if (twl_rtc->class == TWL_6030) {
312 ret = twl_rtc_write_u8(twl_rtc, save_control, REG_RTC_CTRL_REG);
313 if (ret < 0) {
314 dev_err(dev, "%s: restore CTRL_REG, error %d\n",
315 __func__, ret);
316 return ret;
320 tm->tm_sec = bcd2bin(rtc_data[0]);
321 tm->tm_min = bcd2bin(rtc_data[1]);
322 tm->tm_hour = bcd2bin(rtc_data[2]);
323 tm->tm_mday = bcd2bin(rtc_data[3]);
324 tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
325 tm->tm_year = bcd2bin(rtc_data[5]) + 100;
327 return ret;
330 static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
332 struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
333 unsigned char save_control;
334 unsigned char rtc_data[ALL_TIME_REGS];
335 int ret;
337 rtc_data[0] = bin2bcd(tm->tm_sec);
338 rtc_data[1] = bin2bcd(tm->tm_min);
339 rtc_data[2] = bin2bcd(tm->tm_hour);
340 rtc_data[3] = bin2bcd(tm->tm_mday);
341 rtc_data[4] = bin2bcd(tm->tm_mon + 1);
342 rtc_data[5] = bin2bcd(tm->tm_year - 100);
344 /* Stop RTC while updating the TC registers */
345 ret = twl_rtc_read_u8(twl_rtc, &save_control, REG_RTC_CTRL_REG);
346 if (ret < 0)
347 goto out;
349 save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
350 ret = twl_rtc_write_u8(twl_rtc, save_control, REG_RTC_CTRL_REG);
351 if (ret < 0)
352 goto out;
354 /* update all the time registers in one shot */
355 ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data,
356 (twl_rtc->reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
357 if (ret < 0) {
358 dev_err(dev, "rtc_set_time error %d\n", ret);
359 goto out;
362 /* Start back RTC */
363 save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
364 ret = twl_rtc_write_u8(twl_rtc, save_control, REG_RTC_CTRL_REG);
366 out:
367 return ret;
371 * Gets current TWL RTC alarm time.
373 static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
375 struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
376 unsigned char rtc_data[ALL_TIME_REGS];
377 int ret;
379 ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
380 twl_rtc->reg_map[REG_ALARM_SECONDS_REG], ALL_TIME_REGS);
381 if (ret < 0) {
382 dev_err(dev, "rtc_read_alarm error %d\n", ret);
383 return ret;
386 /* some of these fields may be wildcard/"match all" */
387 alm->time.tm_sec = bcd2bin(rtc_data[0]);
388 alm->time.tm_min = bcd2bin(rtc_data[1]);
389 alm->time.tm_hour = bcd2bin(rtc_data[2]);
390 alm->time.tm_mday = bcd2bin(rtc_data[3]);
391 alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
392 alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
394 /* report cached alarm enable state */
395 if (twl_rtc->rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
396 alm->enabled = 1;
398 return ret;
401 static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
403 struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
405 unsigned char alarm_data[ALL_TIME_REGS];
406 int ret;
408 ret = twl_rtc_alarm_irq_enable(dev, 0);
409 if (ret)
410 goto out;
412 alarm_data[0] = bin2bcd(alm->time.tm_sec);
413 alarm_data[1] = bin2bcd(alm->time.tm_min);
414 alarm_data[2] = bin2bcd(alm->time.tm_hour);
415 alarm_data[3] = bin2bcd(alm->time.tm_mday);
416 alarm_data[4] = bin2bcd(alm->time.tm_mon + 1);
417 alarm_data[5] = bin2bcd(alm->time.tm_year - 100);
419 /* update all the alarm registers in one shot */
420 ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data,
421 twl_rtc->reg_map[REG_ALARM_SECONDS_REG], ALL_TIME_REGS);
422 if (ret) {
423 dev_err(dev, "rtc_set_alarm error %d\n", ret);
424 goto out;
427 if (alm->enabled)
428 ret = twl_rtc_alarm_irq_enable(dev, 1);
429 out:
430 return ret;
433 static irqreturn_t twl_rtc_interrupt(int irq, void *data)
435 struct twl_rtc *twl_rtc = data;
436 unsigned long events;
437 int ret = IRQ_NONE;
438 int res;
439 u8 rd_reg;
441 res = twl_rtc_read_u8(twl_rtc, &rd_reg, REG_RTC_STATUS_REG);
442 if (res)
443 goto out;
445 * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
446 * only one (ALARM or RTC) interrupt source may be enabled
447 * at time, we also could check our results
448 * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
450 if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
451 events = RTC_IRQF | RTC_AF;
452 else
453 events = RTC_IRQF | RTC_PF;
455 res = twl_rtc_write_u8(twl_rtc, BIT_RTC_STATUS_REG_ALARM_M,
456 REG_RTC_STATUS_REG);
457 if (res)
458 goto out;
460 if (twl_rtc->class == TWL_4030) {
461 /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
462 * needs 2 reads to clear the interrupt. One read is done in
463 * do_twl_pwrirq(). Doing the second read, to clear
464 * the bit.
466 * FIXME the reason PWR_ISR1 needs an extra read is that
467 * RTC_IF retriggered until we cleared REG_ALARM_M above.
468 * But re-reading like this is a bad hack; by doing so we
469 * risk wrongly clearing status for some other IRQ (losing
470 * the interrupt). Be smarter about handling RTC_UF ...
472 res = twl_i2c_read_u8(TWL4030_MODULE_INT,
473 &rd_reg, TWL4030_INT_PWR_ISR1);
474 if (res)
475 goto out;
478 /* Notify RTC core on event */
479 rtc_update_irq(twl_rtc->rtc, 1, events);
481 ret = IRQ_HANDLED;
482 out:
483 return ret;
486 static const struct rtc_class_ops twl_rtc_ops = {
487 .read_time = twl_rtc_read_time,
488 .set_time = twl_rtc_set_time,
489 .read_alarm = twl_rtc_read_alarm,
490 .set_alarm = twl_rtc_set_alarm,
491 .alarm_irq_enable = twl_rtc_alarm_irq_enable,
494 /*----------------------------------------------------------------------*/
496 static int twl_rtc_probe(struct platform_device *pdev)
498 struct twl_rtc *twl_rtc;
499 struct device_node *np = pdev->dev.of_node;
500 int ret = -EINVAL;
501 int irq = platform_get_irq(pdev, 0);
502 u8 rd_reg;
504 if (!np) {
505 dev_err(&pdev->dev, "no DT info\n");
506 return -EINVAL;
509 if (irq <= 0)
510 return ret;
512 twl_rtc = devm_kzalloc(&pdev->dev, sizeof(*twl_rtc), GFP_KERNEL);
513 if (!twl_rtc)
514 return -ENOMEM;
516 if (twl_class_is_4030()) {
517 twl_rtc->class = TWL_4030;
518 twl_rtc->reg_map = (u8 *)twl4030_rtc_reg_map;
519 } else if (twl_class_is_6030()) {
520 twl_rtc->class = TWL_6030;
521 twl_rtc->reg_map = (u8 *)twl6030_rtc_reg_map;
522 } else {
523 dev_err(&pdev->dev, "TWL Class not supported.\n");
524 return -EINVAL;
527 ret = twl_rtc_read_u8(twl_rtc, &rd_reg, REG_RTC_STATUS_REG);
528 if (ret < 0)
529 return ret;
531 if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
532 dev_warn(&pdev->dev, "Power up reset detected.\n");
534 if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
535 dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
537 /* Clear RTC Power up reset and pending alarm interrupts */
538 ret = twl_rtc_write_u8(twl_rtc, rd_reg, REG_RTC_STATUS_REG);
539 if (ret < 0)
540 return ret;
542 if (twl_rtc->class == TWL_6030) {
543 twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
544 REG_INT_MSK_LINE_A);
545 twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
546 REG_INT_MSK_STS_A);
549 dev_info(&pdev->dev, "Enabling TWL-RTC\n");
550 ret = twl_rtc_write_u8(twl_rtc, BIT_RTC_CTRL_REG_STOP_RTC_M,
551 REG_RTC_CTRL_REG);
552 if (ret < 0)
553 return ret;
555 /* ensure interrupts are disabled, bootloaders can be strange */
556 ret = twl_rtc_write_u8(twl_rtc, 0, REG_RTC_INTERRUPTS_REG);
557 if (ret < 0)
558 dev_warn(&pdev->dev, "unable to disable interrupt\n");
560 /* init cached IRQ enable bits */
561 ret = twl_rtc_read_u8(twl_rtc, &twl_rtc->rtc_irq_bits,
562 REG_RTC_INTERRUPTS_REG);
563 if (ret < 0)
564 return ret;
566 platform_set_drvdata(pdev, twl_rtc);
567 device_init_wakeup(&pdev->dev, 1);
569 twl_rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
570 &twl_rtc_ops, THIS_MODULE);
571 if (IS_ERR(twl_rtc->rtc)) {
572 dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
573 PTR_ERR(twl_rtc->rtc));
574 return PTR_ERR(twl_rtc->rtc);
577 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
578 twl_rtc_interrupt,
579 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
580 dev_name(&twl_rtc->rtc->dev), twl_rtc);
581 if (ret < 0) {
582 dev_err(&pdev->dev, "IRQ is not free.\n");
583 return ret;
586 return 0;
590 * Disable all TWL RTC module interrupts.
591 * Sets status flag to free.
593 static int twl_rtc_remove(struct platform_device *pdev)
595 struct twl_rtc *twl_rtc = platform_get_drvdata(pdev);
597 /* leave rtc running, but disable irqs */
598 mask_rtc_irq_bit(twl_rtc, BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
599 mask_rtc_irq_bit(twl_rtc, BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
600 if (twl_rtc->class == TWL_6030) {
601 twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
602 REG_INT_MSK_LINE_A);
603 twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
604 REG_INT_MSK_STS_A);
607 return 0;
610 static void twl_rtc_shutdown(struct platform_device *pdev)
612 struct twl_rtc *twl_rtc = platform_get_drvdata(pdev);
614 /* mask timer interrupts, but leave alarm interrupts on to enable
615 power-on when alarm is triggered */
616 mask_rtc_irq_bit(twl_rtc, BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
619 #ifdef CONFIG_PM_SLEEP
620 static int twl_rtc_suspend(struct device *dev)
622 struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
624 twl_rtc->irqstat = twl_rtc->rtc_irq_bits;
626 mask_rtc_irq_bit(twl_rtc, BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
627 return 0;
630 static int twl_rtc_resume(struct device *dev)
632 struct twl_rtc *twl_rtc = dev_get_drvdata(dev);
634 set_rtc_irq_bit(twl_rtc, twl_rtc->irqstat);
635 return 0;
637 #endif
639 static SIMPLE_DEV_PM_OPS(twl_rtc_pm_ops, twl_rtc_suspend, twl_rtc_resume);
641 static const struct of_device_id twl_rtc_of_match[] = {
642 {.compatible = "ti,twl4030-rtc", },
643 { },
645 MODULE_DEVICE_TABLE(of, twl_rtc_of_match);
647 static struct platform_driver twl4030rtc_driver = {
648 .probe = twl_rtc_probe,
649 .remove = twl_rtc_remove,
650 .shutdown = twl_rtc_shutdown,
651 .driver = {
652 .name = "twl_rtc",
653 .pm = &twl_rtc_pm_ops,
654 .of_match_table = twl_rtc_of_match,
658 module_platform_driver(twl4030rtc_driver);
660 MODULE_AUTHOR("Texas Instruments, MontaVista Software");
661 MODULE_LICENSE("GPL");