drivers/net/gianfar_mii.c

   1 /*
   2  * drivers/net/gianfar_mii.c
   3  *
   4  * Gianfar Ethernet Driver -- MIIM bus implementation
   5  * Provides Bus interface for MIIM regs
   6  *
   7  * Author: Andy Fleming
   8  * Maintainer: Kumar Gala
   9  *
  10  * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
  11  *
  12  * This program is free software; you can redistribute  it and/or modify it
  13  * under  the terms of  the GNU General  Public License as published by the
  14  * Free Software Foundation;  either version 2 of the  License, or (at your
  15  * option) any later version.
  16  *
  17  */
  18
  19 #include <linux/config.h>
  20 #include <linux/kernel.h>
  21 #include <linux/sched.h>
  22 #include <linux/string.h>
  23 #include <linux/errno.h>
  24 #include <linux/unistd.h>
  25 #include <linux/slab.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/init.h>
  28 #include <linux/delay.h>
  29 #include <linux/netdevice.h>
  30 #include <linux/etherdevice.h>
  31 #include <linux/skbuff.h>
  32 #include <linux/spinlock.h>
  33 #include <linux/mm.h>
  34 #include <linux/module.h>
  35 #include <linux/platform_device.h>
  36 #include <asm/ocp.h>
  37 #include <linux/crc32.h>
  38 #include <linux/mii.h>
  39 #include <linux/phy.h>
  40
  41 #include <asm/io.h>
  42 #include <asm/irq.h>
  43 #include <asm/uaccess.h>
  44
  45 #include "gianfar.h"
  46 #include "gianfar_mii.h"
  47
  48 /* Write value to the PHY at mii_id at register regnum,
  49  * on the bus, waiting until the write is done before returning.
  50  * All PHY configuration is done through the TSEC1 MIIM regs */
  51 int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
  52 {
  53         struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
  54
  55         /* Set the PHY address and the register address we want to write */
  56         gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
  57
  58         /* Write out the value we want */
  59         gfar_write(&regs->miimcon, value);
  60
  61         /* Wait for the transaction to finish */
  62         while (gfar_read(&regs->miimind) & MIIMIND_BUSY)
  63                 cpu_relax();
  64
  65         return 0;
  66 }
  67
  68 /* Read the bus for PHY at addr mii_id, register regnum, and
  69  * return the value.  Clears miimcom first.  All PHY
  70  * configuration has to be done through the TSEC1 MIIM regs */
  71 int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
  72 {
  73         struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
  74         u16 value;
  75
  76         /* Set the PHY address and the register address we want to read */
  77         gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
  78
  79         /* Clear miimcom, and then initiate a read */
  80         gfar_write(&regs->miimcom, 0);
  81         gfar_write(&regs->miimcom, MII_READ_COMMAND);
  82
  83         /* Wait for the transaction to finish */
  84         while (gfar_read(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
  85                 cpu_relax();
  86
  87         /* Grab the value of the register from miimstat */
  88         value = gfar_read(&regs->miimstat);
  89
  90         return value;
  91 }
  92
  93
  94 /* Reset the MIIM registers, and wait for the bus to free */
  95 int gfar_mdio_reset(struct mii_bus *bus)
  96 {
  97         struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
  98         unsigned int timeout = PHY_INIT_TIMEOUT;
  99
 100         spin_lock_bh(&bus->mdio_lock);
 101
 102         /* Reset the management interface */
 103         gfar_write(&regs->miimcfg, MIIMCFG_RESET);
 104
 105         /* Setup the MII Mgmt clock speed */
 106         gfar_write(&regs->miimcfg, MIIMCFG_INIT_VALUE);
 107
 108         /* Wait until the bus is free */
 109         while ((gfar_read(&regs->miimind) & MIIMIND_BUSY) &&
 110                         timeout--)
 111                 cpu_relax();
 112
 113         spin_unlock_bh(&bus->mdio_lock);
 114
 115         if(timeout <= 0) {
 116                 printk(KERN_ERR "%s: The MII Bus is stuck!\n",
 117                                 bus->name);
 118                 return -EBUSY;
 119         }
 120
 121         return 0;
 122 }
 123
 124
 125 int gfar_mdio_probe(struct device *dev)
 126 {
 127         struct platform_device *pdev = to_platform_device(dev);
 128         struct gianfar_mdio_data *pdata;
 129         struct gfar_mii __iomem *regs;
 130         struct mii_bus *new_bus;
 131         struct resource *r;
 132         int err = 0;
 133
 134         if (NULL == dev)
 135                 return -EINVAL;
 136
 137         new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
 138
 139         if (NULL == new_bus)
 140                 return -ENOMEM;
 141
 142         new_bus->name = "Gianfar MII Bus",
 143         new_bus->read = &gfar_mdio_read,
 144         new_bus->write = &gfar_mdio_write,
 145         new_bus->reset = &gfar_mdio_reset,
 146         new_bus->id = pdev->id;
 147
 148         pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
 149
 150         if (NULL == pdata) {
 151                 printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
 152                 return -ENODEV;
 153         }
 154
 155         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 156
 157         /* Set the PHY base address */
 158         regs = ioremap(r->start, sizeof (struct gfar_mii));
 159
 160         if (NULL == regs) {
 161                 err = -ENOMEM;
 162                 goto reg_map_fail;
 163         }
 164
 165         new_bus->priv = (void __force *)regs;
 166
 167         new_bus->irq = pdata->irq;
 168
 169         new_bus->dev = dev;
 170         dev_set_drvdata(dev, new_bus);
 171
 172         err = mdiobus_register(new_bus);
 173
 174         if (0 != err) {
 175                 printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
 176                                 new_bus->name);
 177                 goto bus_register_fail;
 178         }
 179
 180         return 0;
 181
 182 bus_register_fail:
 183         iounmap(regs);
 184 reg_map_fail:
 185         kfree(new_bus);
 186
 187         return err;
 188 }
 189
 190
 191 int gfar_mdio_remove(struct device *dev)
 192 {
 193         struct mii_bus *bus = dev_get_drvdata(dev);
 194
 195         mdiobus_unregister(bus);
 196
 197         dev_set_drvdata(dev, NULL);
 198
 199         iounmap((void __iomem *)bus->priv);
 200         bus->priv = NULL;
 201         kfree(bus);
 202
 203         return 0;
 204 }
 205
 206 static struct device_driver gianfar_mdio_driver = {
 207         .name = "fsl-gianfar_mdio",
 208         .bus = &platform_bus_type,
 209         .probe = gfar_mdio_probe,
 210         .remove = gfar_mdio_remove,
 211 };
 212
 213 int __init gfar_mdio_init(void)
 214 {
 215         return driver_register(&gianfar_mdio_driver);
 216 }
 217
 218 void __exit gfar_mdio_exit(void)
 219 {
 220         driver_unregister(&gianfar_mdio_driver);
 221 }