arch/arm/mach-at91/board-eb9200.c

   1 /*
   2  * linux/arch/arm/mach-at91/board-eb9200.c
   3  *
   4  *  Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
   5  *  by Andrew Patrikalakis
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21
  22 #include <linux/types.h>
  23 #include <linux/gpio.h>
  24 #include <linux/init.h>
  25 #include <linux/mm.h>
  26 #include <linux/module.h>
  27 #include <linux/device.h>
  28
  29 #include <mach/hardware.h>
  30 #include <asm/setup.h>
  31 #include <asm/mach-types.h>
  32 #include <asm/irq.h>
  33
  34 #include <asm/mach/arch.h>
  35 #include <asm/mach/map.h>
  36 #include <asm/mach/irq.h>
  37
  38 #include "at91_aic.h"
  39 #include "board.h"
  40 #include "generic.h"
  41 #include "gpio.h"
  42
  43
  44 static void __init eb9200_init_early(void)
  45 {
  46         /* Initialize processor: 18.432 MHz crystal */
  47         at91_initialize(18432000);
  48 }
  49
  50 static struct macb_platform_data __initdata eb9200_eth_data = {
  51         .phy_irq_pin    = AT91_PIN_PC4,
  52         .is_rmii        = 1,
  53 };
  54
  55 static struct at91_usbh_data __initdata eb9200_usbh_data = {
  56         .ports          = 2,
  57         .vbus_pin       = {-EINVAL, -EINVAL},
  58         .overcurrent_pin= {-EINVAL, -EINVAL},
  59 };
  60
  61 static struct at91_udc_data __initdata eb9200_udc_data = {
  62         .vbus_pin       = AT91_PIN_PD4,
  63         .pullup_pin     = AT91_PIN_PD5,
  64 };
  65
  66 static struct at91_cf_data __initdata eb9200_cf_data = {
  67         .irq_pin        = -EINVAL,
  68         .det_pin        = AT91_PIN_PB0,
  69         .vcc_pin        = -EINVAL,
  70         .rst_pin        = AT91_PIN_PC5,
  71 };
  72
  73 static struct mci_platform_data __initdata eb9200_mci0_data = {
  74         .slot[0] = {
  75                 .bus_width      = 4,
  76                 .detect_pin     = -EINVAL,
  77                 .wp_pin         = -EINVAL,
  78         },
  79 };
  80
  81 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
  82         {
  83                 I2C_BOARD_INFO("24c512", 0x50),
  84         },
  85 };
  86
  87
  88 static void __init eb9200_board_init(void)
  89 {
  90         /* Serial */
  91         /* DBGU on ttyS0. (Rx & Tx only) */
  92         at91_register_uart(0, 0, 0);
  93
  94         /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
  95         at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
  96                         | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
  97                         | ATMEL_UART_RI);
  98
  99         /* USART2 on ttyS2. (Rx, Tx) - IRDA */
 100         at91_register_uart(AT91RM9200_ID_US2, 2, 0);
 101         at91_add_device_serial();
 102         /* Ethernet */
 103         at91_add_device_eth(&eb9200_eth_data);
 104         /* USB Host */
 105         at91_add_device_usbh(&eb9200_usbh_data);
 106         /* USB Device */
 107         at91_add_device_udc(&eb9200_udc_data);
 108         /* I2C */
 109         at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
 110         /* Compact Flash */
 111         at91_add_device_cf(&eb9200_cf_data);
 112         /* SPI */
 113         at91_add_device_spi(NULL, 0);
 114         /* MMC */
 115         /* only supports 1 or 4 bit interface, not wired through to SPI */
 116         at91_add_device_mci(0, &eb9200_mci0_data);
 117 }
 118
 119 MACHINE_START(ATEB9200, "Embest ATEB9200")
 120         .init_time      = at91rm9200_timer_init,
 121         .map_io         = at91_map_io,
 122         .handle_irq     = at91_aic_handle_irq,
 123         .init_early     = eb9200_init_early,
 124         .init_irq       = at91_init_irq_default,
 125         .init_machine   = eb9200_board_init,
 126 MACHINE_END