arch/arm/mach-at91/board-snapper9260.c

   1 /*
   2  * linux/arch/arm/mach-at91/board-snapper9260.c
   3  *
   4  *  Copyright (C) 2010 Bluewater System Ltd
   5  *
   6  * Author: Andre Renaud <andre@bluewatersys.com>
   7  * Author: Ryan Mallon
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22  *
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/gpio.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/spi/spi.h>
  29 #include <linux/platform_data/pca953x.h>
  30
  31 #include <asm/mach-types.h>
  32 #include <asm/mach/arch.h>
  33
  34 #include <mach/hardware.h>
  35 #include <mach/at91sam9_smc.h>
  36
  37 #include "at91_aic.h"
  38 #include "board.h"
  39 #include "sam9_smc.h"
  40 #include "generic.h"
  41 #include "gpio.h"
  42
  43 #define SNAPPER9260_IO_EXP_GPIO(x)      (NR_BUILTIN_GPIO + (x))
  44
  45 static void __init snapper9260_init_early(void)
  46 {
  47         at91_initialize(18432000);
  48 }
  49
  50 static struct at91_usbh_data __initdata snapper9260_usbh_data = {
  51         .ports          = 2,
  52         .vbus_pin       = {-EINVAL, -EINVAL},
  53         .overcurrent_pin= {-EINVAL, -EINVAL},
  54 };
  55
  56 static struct at91_udc_data __initdata snapper9260_udc_data = {
  57         .vbus_pin               = SNAPPER9260_IO_EXP_GPIO(5),
  58         .vbus_active_low        = 1,
  59         .vbus_polled            = 1,
  60         .pullup_pin             = -EINVAL,
  61 };
  62
  63 static struct macb_platform_data snapper9260_macb_data = {
  64         .phy_irq_pin    = -EINVAL,
  65         .is_rmii        = 1,
  66 };
  67
  68 static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
  69         {
  70                 .name   = "Preboot",
  71                 .offset = 0,
  72                 .size   = SZ_128K,
  73         },
  74         {
  75                 .name   = "Bootloader",
  76                 .offset = MTDPART_OFS_APPEND,
  77                 .size   = SZ_256K,
  78         },
  79         {
  80                 .name   = "Environment",
  81                 .offset = MTDPART_OFS_APPEND,
  82                 .size   = SZ_128K,
  83         },
  84         {
  85                 .name   = "Kernel",
  86                 .offset = MTDPART_OFS_APPEND,
  87                 .size   = SZ_4M,
  88         },
  89         {
  90                 .name   = "Filesystem",
  91                 .offset = MTDPART_OFS_APPEND,
  92                 .size   = MTDPART_SIZ_FULL,
  93         },
  94 };
  95
  96 static struct atmel_nand_data __initdata snapper9260_nand_data = {
  97         .ale            = 21,
  98         .cle            = 22,
  99         .rdy_pin        = AT91_PIN_PC13,
 100         .parts          = snapper9260_nand_partitions,
 101         .num_parts      = ARRAY_SIZE(snapper9260_nand_partitions),
 102         .bus_width_16   = 0,
 103         .enable_pin     = -EINVAL,
 104         .det_pin        = -EINVAL,
 105         .ecc_mode       = NAND_ECC_SOFT,
 106 };
 107
 108 static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
 109         .ncs_read_setup         = 0,
 110         .nrd_setup              = 0,
 111         .ncs_write_setup        = 0,
 112         .nwe_setup              = 0,
 113
 114         .ncs_read_pulse         = 5,
 115         .nrd_pulse              = 2,
 116         .ncs_write_pulse        = 5,
 117         .nwe_pulse              = 2,
 118
 119         .read_cycle             = 7,
 120         .write_cycle            = 7,
 121
 122         .mode                   = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 123                                    AT91_SMC_EXNWMODE_DISABLE),
 124         .tdf_cycles             = 1,
 125 };
 126
 127 static struct pca953x_platform_data snapper9260_io_expander_data = {
 128         .gpio_base              = SNAPPER9260_IO_EXP_GPIO(0),
 129 };
 130
 131 static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
 132         {
 133                 /* IO expander */
 134                 I2C_BOARD_INFO("max7312", 0x28),
 135                 .platform_data = &snapper9260_io_expander_data,
 136         },
 137         {
 138                 /* Audio codec */
 139                 I2C_BOARD_INFO("tlv320aic23", 0x1a),
 140         },
 141 };
 142
 143 static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = {
 144                 /* RTC */
 145                 I2C_BOARD_INFO("isl1208", 0x6f),
 146 };
 147
 148 static void __init snapper9260_add_device_nand(void)
 149 {
 150         at91_set_A_periph(AT91_PIN_PC14, 0);
 151         sam9_smc_configure(0, 3, &snapper9260_nand_smc_config);
 152         at91_add_device_nand(&snapper9260_nand_data);
 153 }
 154
 155 static void __init snapper9260_board_init(void)
 156 {
 157         at91_add_device_i2c(snapper9260_i2c_devices,
 158                             ARRAY_SIZE(snapper9260_i2c_devices));
 159
 160         snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
 161         i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
 162
 163         /* Debug on ttyS0 */
 164         at91_register_uart(0, 0, 0);
 165
 166         at91_register_uart(AT91SAM9260_ID_US0, 1,
 167                            ATMEL_UART_CTS | ATMEL_UART_RTS);
 168         at91_register_uart(AT91SAM9260_ID_US1, 2,
 169                            ATMEL_UART_CTS | ATMEL_UART_RTS);
 170         at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
 171         at91_add_device_serial();
 172         at91_add_device_usbh(&snapper9260_usbh_data);
 173         at91_add_device_udc(&snapper9260_udc_data);
 174         at91_add_device_eth(&snapper9260_macb_data);
 175         at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
 176                                                  ATMEL_SSC_TD | ATMEL_SSC_RD));
 177         snapper9260_add_device_nand();
 178 }
 179
 180 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
 181         .init_time      = at91sam926x_pit_init,
 182         .map_io         = at91_map_io,
 183         .handle_irq     = at91_aic_handle_irq,
 184         .init_early     = snapper9260_init_early,
 185         .init_irq       = at91_init_irq_default,
 186         .init_machine   = snapper9260_board_init,
 187 MACHINE_END
 188
 189