2 * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
10 #include <linux/init.h>
11 #include <linux/gpio.h>
12 #include <linux/delay.h>
13 #include <linux/memblock.h>
14 #include <linux/types.h>
15 #include <linux/i2c-gpio.h>
16 #include <linux/interrupt.h>
17 #include <linux/backlight.h>
18 #include <linux/platform_device.h>
19 #include <linux/memblock.h>
21 #include <linux/mtd/physmap.h>
22 #include <linux/mtd/partitions.h>
24 #include <asm/setup.h>
25 #include <asm/mach/map.h>
26 #include <asm/mach/arch.h>
27 #include <asm/mach-types.h>
29 #include <video/platform_lcd.h>
31 #include <mach/hardware.h>
36 #define VIDEORAM_SIZE SZ_128K
38 #define EDB7211_LCD_DC_DC_EN CLPS711X_GPIO(3, 1)
39 #define EDB7211_LCDEN CLPS711X_GPIO(3, 2)
40 #define EDB7211_LCDBL CLPS711X_GPIO(3, 3)
42 #define EDB7211_I2C_SDA CLPS711X_GPIO(3, 4)
43 #define EDB7211_I2C_SCL CLPS711X_GPIO(3, 5)
45 #define EDB7211_FLASH0_BASE (CS0_PHYS_BASE)
46 #define EDB7211_FLASH1_BASE (CS1_PHYS_BASE)
48 #define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300)
49 #define EDB7211_CS8900_IRQ (IRQ_EINT3)
51 /* The extra 8 lines of the keyboard matrix */
52 #define EDB7211_EXTKBD_BASE (CS3_PHYS_BASE)
54 static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata
= {
55 .sda_pin
= EDB7211_I2C_SDA
,
56 .scl_pin
= EDB7211_I2C_SCL
,
57 .scl_is_output_only
= 1,
60 static struct resource edb7211_cs8900_resource
[] __initdata
= {
61 DEFINE_RES_MEM(EDB7211_CS8900_BASE
, SZ_1K
),
62 DEFINE_RES_IRQ(EDB7211_CS8900_IRQ
),
65 static struct mtd_partition edb7211_flash_partitions
[] __initdata
= {
69 .size
= MTDPART_SIZ_FULL
,
73 static struct physmap_flash_data edb7211_flash_pdata __initdata
= {
75 .parts
= edb7211_flash_partitions
,
76 .nr_parts
= ARRAY_SIZE(edb7211_flash_partitions
),
79 static struct resource edb7211_flash_resources
[] __initdata
= {
80 DEFINE_RES_MEM(EDB7211_FLASH0_BASE
, SZ_8M
),
81 DEFINE_RES_MEM(EDB7211_FLASH1_BASE
, SZ_8M
),
84 static struct platform_device edb7211_flash_pdev __initdata
= {
85 .name
= "physmap-flash",
87 .resource
= edb7211_flash_resources
,
88 .num_resources
= ARRAY_SIZE(edb7211_flash_resources
),
90 .platform_data
= &edb7211_flash_pdata
,
94 static void edb7211_lcd_power_set(struct plat_lcd_data
*pd
, unsigned int power
)
97 gpio_set_value(EDB7211_LCDEN
, 1);
99 gpio_set_value(EDB7211_LCD_DC_DC_EN
, 1);
101 gpio_set_value(EDB7211_LCD_DC_DC_EN
, 0);
103 gpio_set_value(EDB7211_LCDEN
, 0);
107 static struct plat_lcd_data edb7211_lcd_power_pdata
= {
108 .set_power
= edb7211_lcd_power_set
,
111 static void edb7211_lcd_backlight_set_intensity(int intensity
)
113 gpio_set_value(EDB7211_LCDBL
, !!intensity
);
114 clps_writel((clps_readl(PMPCON
) & 0xf0ff) | (intensity
<< 8), PMPCON
);
117 static struct generic_bl_info edb7211_lcd_backlight_pdata
= {
118 .name
= "lcd-backlight.0",
119 .default_intensity
= 0x01,
120 .max_intensity
= 0x0f,
121 .set_bl_intensity
= edb7211_lcd_backlight_set_intensity
,
124 static struct gpio edb7211_gpios
[] __initconst
= {
125 { EDB7211_LCD_DC_DC_EN
, GPIOF_OUT_INIT_LOW
, "LCD DC-DC" },
126 { EDB7211_LCDEN
, GPIOF_OUT_INIT_LOW
, "LCD POWER" },
127 { EDB7211_LCDBL
, GPIOF_OUT_INIT_LOW
, "LCD BACKLIGHT" },
130 /* Reserve screen memory region at the start of main system memory. */
131 static void __init
edb7211_reserve(void)
133 memblock_reserve(PHYS_OFFSET
, VIDEORAM_SIZE
);
137 fixup_edb7211(struct tag
*tags
, char **cmdline
)
140 * Bank start addresses are not present in the information
141 * passed in from the boot loader. We could potentially
142 * detect them, but instead we hard-code them.
144 * Banks sizes _are_ present in the param block, but we're
145 * not using that information yet.
147 memblock_add(0xc0000000, SZ_8M
);
148 memblock_add(0xc1000000, SZ_8M
);
151 static void __init
edb7211_init(void)
153 clps711x_devices_init();
156 static void __init
edb7211_init_late(void)
158 gpio_request_array(edb7211_gpios
, ARRAY_SIZE(edb7211_gpios
));
160 platform_device_register(&edb7211_flash_pdev
);
161 platform_device_register_data(&platform_bus
, "platform-lcd", 0,
162 &edb7211_lcd_power_pdata
,
163 sizeof(edb7211_lcd_power_pdata
));
164 platform_device_register_data(&platform_bus
, "generic-bl", 0,
165 &edb7211_lcd_backlight_pdata
,
166 sizeof(edb7211_lcd_backlight_pdata
));
167 platform_device_register_simple("video-clps711x", 0, NULL
, 0);
168 platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource
,
169 ARRAY_SIZE(edb7211_cs8900_resource
));
170 platform_device_register_data(&platform_bus
, "i2c-gpio", 0,
172 sizeof(edb7211_i2c_pdata
));
175 MACHINE_START(EDB7211
, "CL-EDB7211 (EP7211 eval board)")
176 /* Maintainer: Jon McClintock */
177 .atag_offset
= VIDEORAM_SIZE
+ 0x100,
178 .fixup
= fixup_edb7211
,
179 .reserve
= edb7211_reserve
,
180 .map_io
= clps711x_map_io
,
181 .init_early
= clps711x_init_early
,
182 .init_irq
= clps711x_init_irq
,
183 .init_time
= clps711x_timer_init
,
184 .init_machine
= edb7211_init
,
185 .init_late
= edb7211_init_late
,
186 .restart
= clps711x_restart
,