10 config ARCH_DAVINCI_DMx
14 menu "TI DaVinci Implementations"
16 comment "DaVinci Core Type"
18 config ARCH_DAVINCI_DM644x
19 bool "DaVinci 644x based system"
21 select ARCH_DAVINCI_DMx
23 config ARCH_DAVINCI_DM355
24 bool "DaVinci 355 based system"
26 select ARCH_DAVINCI_DMx
28 config ARCH_DAVINCI_DM646x
29 bool "DaVinci 646x based system"
31 select ARCH_DAVINCI_DMx
33 config ARCH_DAVINCI_DA830
34 bool "DA830/OMAP-L137/AM17x based system"
35 select ARCH_DAVINCI_DA8XX
36 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
39 config ARCH_DAVINCI_DA850
40 bool "DA850/OMAP-L138/AM18x based system"
41 select ARCH_DAVINCI_DA8XX
44 config ARCH_DAVINCI_DA8XX
48 config ARCH_DAVINCI_DM365
49 bool "DaVinci 365 based system"
51 select ARCH_DAVINCI_DMx
53 comment "DaVinci Board Type"
56 bool "Support DA8XX platforms using device tree"
58 depends on ARCH_DAVINCI_DA8XX
61 Say y here to include support for TI DaVinci DA850 based using
62 Flattened Device Tree. More information at Documentation/devicetree
64 config MACH_DAVINCI_EVM
66 default ARCH_DAVINCI_DM644x
67 depends on ARCH_DAVINCI_DM644x
71 Configure this option to specify the whether the board used
72 for development is a DM644x EVM
76 depends on ARCH_DAVINCI_DM644x
80 Say Y here to select the Lyrtech Small Form Factor
81 Software Defined Radio (SFFSDR) board.
83 config MACH_NEUROS_OSD2
84 bool "Neuros OSD2 Open Television Set Top Box"
85 depends on ARCH_DAVINCI_DM644x
87 Configure this option to specify the whether the board used
88 for development is a Neuros OSD2 Open Set Top Box.
90 config MACH_DAVINCI_DM355_EVM
92 default ARCH_DAVINCI_DM355
93 depends on ARCH_DAVINCI_DM355
95 Configure this option to specify the whether the board used
96 for development is a DM355 EVM
98 config MACH_DM355_LEOPARD
99 bool "DM355 Leopard board"
100 depends on ARCH_DAVINCI_DM355
102 Configure this option to specify the whether the board used
103 for development is a DM355 Leopard board.
105 config MACH_DAVINCI_DM6467_EVM
107 default ARCH_DAVINCI_DM646x
108 depends on ARCH_DAVINCI_DM646x
111 select MACH_DAVINCI_DM6467TEVM
113 Configure this option to specify the whether the board used
114 for development is a DM6467 EVM
116 config MACH_DAVINCI_DM6467TEVM
119 config MACH_DAVINCI_DM365_EVM
121 default ARCH_DAVINCI_DM365
122 depends on ARCH_DAVINCI_DM365
126 Configure this option to specify whether the board used
127 for development is a DM365 EVM
129 config MACH_DAVINCI_DA830_EVM
130 bool "TI DA830/OMAP-L137/AM17x Reference Platform"
131 default ARCH_DAVINCI_DA830
132 depends on ARCH_DAVINCI_DA830
137 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
140 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
141 depends on MACH_DAVINCI_DA830_EVM
143 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
144 detected automatically based on successful probe of the I2C
145 based GPIO expander on that board. This option selected in this
146 menu has an effect only in case of a successful UI card detection.
151 Say Y here to use the LCD as a framebuffer or simple character
157 Say Y here to use the NAND flash. Do not forget to setup
158 the switch correctly.
161 config MACH_DAVINCI_DA850_EVM
162 bool "TI DA850/OMAP-L138/AM18x Reference Platform"
163 default ARCH_DAVINCI_DA850
164 depends on ARCH_DAVINCI_DA850
166 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
169 prompt "Select peripherals connected to expander on UI board"
170 depends on MACH_DAVINCI_DA850_EVM
172 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
173 EVM is detected automatically based on successful probe of the I2C
174 based GPIO expander on that card. This option selected in this
175 menu has an effect only in case of a successful UI card detection.
178 bool "No peripheral is enabled"
180 Say Y if you do not want to enable any of the peripherals connected
181 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
184 bool "RMII Ethernet PHY"
186 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
187 EVM. This PHY is found on the UI daughter card that is supplied with
189 NOTE: Please take care while choosing this option, MII PHY will
190 not be functional if RMII mode is selected.
192 config DA850_UI_SD_VIDEO_PORT
193 bool "Video Port Interface"
195 Say Y if you want to use Video Port Interface (VPIF) on the
196 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
197 UI daughter card that is supplied with the EVM.
202 bool "AM18x wl1271 daughter board"
203 depends on MACH_DAVINCI_DA850_EVM
205 The wl1271 daughter card for AM18x EVMs is a combo wireless
206 connectivity add-on card, based on the LS Research TiWi module with
207 Texas Instruments' wl1271 solution.
208 Say Y if you want to use a wl1271 expansion card connected to the
212 config MACH_MITYOMAPL138
213 bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
214 depends on ARCH_DAVINCI_DA850
218 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
219 System on Module. Information on this SoM may be found at
220 http://www.mitydsp.com
222 config MACH_OMAPL138_HAWKBOARD
223 bool "TI AM1808 / OMAPL-138 Hawkboard platform"
224 depends on ARCH_DAVINCI_DA850
226 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
227 Information of this board may be found at
228 http://www.hawkboard.org/
231 bool "DAVINCI multiplexing support"
232 depends on ARCH_DAVINCI
235 Pin multiplexing support for DAVINCI boards. If your bootloader
236 sets the multiplexing correctly, say N. Otherwise, or if unsure,
239 config DAVINCI_MUX_DEBUG
240 bool "Multiplexing debug output"
241 depends on DAVINCI_MUX
243 Makes the multiplexing functions print out a lot of debug info.
244 This is useful if you want to find out the correct values of the
245 multiplexing registers.
247 config DAVINCI_MUX_WARNINGS
248 bool "Warn about pins the bootloader didn't set up"
249 depends on DAVINCI_MUX
251 Choose Y here to warn whenever driver initialization logic needs
252 to change the pin multiplexing setup. When there are no warnings
253 printed, it's safe to deselect DAVINCI_MUX for your product.
255 config DAVINCI_RESET_CLOCKS
256 bool "Reset unused clocks during boot"
257 depends on ARCH_DAVINCI
259 Say Y if you want to reset unused clocks during boot.
260 This option saves power, but assumes all drivers are
261 using the clock framework. Broken drivers that do not
262 yet use clock framework may not work with this option.
263 If you are booting from another operating system, you
264 probably do not want this option enabled until your
265 device drivers work properly.