arch/arm/mach-imx/ehci-imx5.c

   1 /*
   2  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
   3  * Copyright (C) 2010 Freescale Semiconductor, Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License as published by the
   7  * Free Software Foundation; either version 2 of the License, or (at your
   8  * option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful, but
  11  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  12  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  13  * for more details.
  14  */
  15
  16 #include <linux/platform_device.h>
  17 #include <linux/io.h>
  18 #include <linux/platform_data/usb-ehci-mxc.h>
  19
  20 #include "hardware.h"
  21
  22 #define MXC_OTG_OFFSET                  0
  23 #define MXC_H1_OFFSET                   0x200
  24 #define MXC_H2_OFFSET                   0x400
  25
  26 /* USB_CTRL */
  27 #define MXC_OTG_UCTRL_OWIE_BIT          (1 << 27)       /* OTG wakeup intr enable */
  28 #define MXC_OTG_UCTRL_OPM_BIT           (1 << 24)       /* OTG power mask */
  29 #define MXC_H1_UCTRL_H1UIE_BIT          (1 << 12)       /* Host1 ULPI interrupt enable */
  30 #define MXC_H1_UCTRL_H1WIE_BIT          (1 << 11)       /* HOST1 wakeup intr enable */
  31 #define MXC_H1_UCTRL_H1PM_BIT           (1 <<  8)       /* HOST1 power mask */
  32
  33 /* USB_PHY_CTRL_FUNC */
  34 #define MXC_OTG_PHYCTRL_OC_POL_BIT      (1 << 9)        /* OTG Polarity of Overcurrent */
  35 #define MXC_OTG_PHYCTRL_OC_DIS_BIT      (1 << 8)        /* OTG Disable Overcurrent Event */
  36 #define MXC_H1_OC_POL_BIT               (1 << 6)        /* UH1 Polarity of Overcurrent */
  37 #define MXC_H1_OC_DIS_BIT               (1 << 5)        /* UH1 Disable Overcurrent Event */
  38 #define MXC_OTG_PHYCTRL_PWR_POL_BIT     (1 << 3)        /* OTG Power Pin Polarity */
  39
  40 /* USBH2CTRL */
  41 #define MXC_H2_UCTRL_H2UIE_BIT          (1 << 8)
  42 #define MXC_H2_UCTRL_H2WIE_BIT          (1 << 7)
  43 #define MXC_H2_UCTRL_H2PM_BIT           (1 << 4)
  44
  45 #define MXC_USBCMD_OFFSET               0x140
  46
  47 /* USBCMD */
  48 #define MXC_UCMD_ITC_NO_THRESHOLD_MASK  (~(0xff << 16)) /* Interrupt Threshold Control */
  49
  50 int mx51_initialize_usb_hw(int port, unsigned int flags)
  51 {
  52         unsigned int v;
  53         void __iomem *usb_base;
  54         void __iomem *usbotg_base;
  55         void __iomem *usbother_base;
  56         int ret = 0;
  57
  58         usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
  59         if (!usb_base) {
  60                 printk(KERN_ERR "%s(): ioremap failed\n", __func__);
  61                 return -ENOMEM;
  62         }
  63
  64         switch (port) {
  65         case 0: /* OTG port */
  66                 usbotg_base = usb_base + MXC_OTG_OFFSET;
  67                 break;
  68         case 1: /* Host 1 port */
  69                 usbotg_base = usb_base + MXC_H1_OFFSET;
  70                 break;
  71         case 2: /* Host 2 port */
  72                 usbotg_base = usb_base + MXC_H2_OFFSET;
  73                 break;
  74         default:
  75                 printk(KERN_ERR"%s no such port %d\n", __func__, port);
  76                 ret = -ENOENT;
  77                 goto error;
  78         }
  79         usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
  80
  81         switch (port) {
  82         case 0: /*OTG port */
  83                 if (flags & MXC_EHCI_INTERNAL_PHY) {
  84                         v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
  85
  86                         if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
  87                                 v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
  88                         else
  89                                 v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
  90                         if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
  91                                 /* OC/USBPWR is used */
  92                                 v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
  93                         } else {
  94                                 /* OC/USBPWR is not used */
  95                                 v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
  96                         }
  97                         if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
  98                                 v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
  99                         else
 100                                 v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
 101                         __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 102
 103                         v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
 104                         if (flags & MXC_EHCI_WAKEUP_ENABLED)
 105                                 v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
 106                         else
 107                                 v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
 108                         if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 109                                 v &= ~MXC_OTG_UCTRL_OPM_BIT;
 110                         else
 111                                 v |= MXC_OTG_UCTRL_OPM_BIT;
 112                         __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 113                 }
 114                 break;
 115         case 1: /* Host 1 */
 116                 /*Host ULPI */
 117                 v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
 118                 if (flags & MXC_EHCI_WAKEUP_ENABLED) {
 119                         /* HOST1 wakeup/ULPI intr enable */
 120                         v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
 121                 } else {
 122                         /* HOST1 wakeup/ULPI intr disable */
 123                         v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
 124                 }
 125
 126                 if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 127                         v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
 128                 else
 129                         v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
 130                 __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 131
 132                 v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 133                 if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
 134                         v |= MXC_H1_OC_POL_BIT;
 135                 else
 136                         v &= ~MXC_H1_OC_POL_BIT;
 137                 if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 138                         v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
 139                 else
 140                         v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
 141                 __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 142
 143                 v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
 144                 if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
 145                         /* Interrupt Threshold Control:Immediate (no threshold) */
 146                         v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
 147                 __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
 148                 break;
 149         case 2: /* Host 2 ULPI */
 150                 v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
 151                 if (flags & MXC_EHCI_WAKEUP_ENABLED) {
 152                         /* HOST1 wakeup/ULPI intr enable */
 153                         v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
 154                 } else {
 155                         /* HOST1 wakeup/ULPI intr disable */
 156                         v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
 157                 }
 158
 159                 if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 160                         v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
 161                 else
 162                         v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
 163                 __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
 164                 break;
 165         }
 166
 167 error:
 168         iounmap(usb_base);
 169         return ret;
 170 }
 171