Merge tag 'locks-v3.16-2' of git://git.samba.org/jlayton/linux
[linux/fpc-iii.git] / arch / arm / mach-imx / mach-eukrea_cpuimx25.c
blobe978dda1434cc2269efcfed4b4f36c3084ec5b6f
1 /*
2 * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
3 * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin Street, Fifth Floor,
17 * Boston, MA 02110-1301, USA.
20 #include <linux/types.h>
21 #include <linux/init.h>
22 #include <linux/delay.h>
23 #include <linux/clk.h>
24 #include <linux/irq.h>
25 #include <linux/gpio.h>
26 #include <linux/platform_device.h>
27 #include <linux/usb/otg.h>
28 #include <linux/usb/ulpi.h>
30 #include <asm/mach-types.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/time.h>
33 #include <asm/memory.h>
34 #include <asm/mach/map.h>
36 #include "common.h"
37 #include "devices-imx25.h"
38 #include "eukrea-baseboards.h"
39 #include "hardware.h"
40 #include "iomux-mx25.h"
41 #include "mx25.h"
43 static const struct imxuart_platform_data uart_pdata __initconst = {
44 .flags = IMXUART_HAVE_RTSCTS,
47 static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
48 /* FEC - RMII */
49 MX25_PAD_FEC_MDC__FEC_MDC,
50 MX25_PAD_FEC_MDIO__FEC_MDIO,
51 MX25_PAD_FEC_TDATA0__FEC_TDATA0,
52 MX25_PAD_FEC_TDATA1__FEC_TDATA1,
53 MX25_PAD_FEC_TX_EN__FEC_TX_EN,
54 MX25_PAD_FEC_RDATA0__FEC_RDATA0,
55 MX25_PAD_FEC_RDATA1__FEC_RDATA1,
56 MX25_PAD_FEC_RX_DV__FEC_RX_DV,
57 MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
58 /* I2C1 */
59 MX25_PAD_I2C1_CLK__I2C1_CLK,
60 MX25_PAD_I2C1_DAT__I2C1_DAT,
63 static const struct fec_platform_data mx25_fec_pdata __initconst = {
64 .phy = PHY_INTERFACE_MODE_RMII,
67 static const struct mxc_nand_platform_data
68 eukrea_cpuimx25_nand_board_info __initconst = {
69 .width = 1,
70 .hw_ecc = 1,
71 .flash_bbt = 1,
74 static const struct imxi2c_platform_data
75 eukrea_cpuimx25_i2c0_data __initconst = {
76 .bitrate = 100000,
79 static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
81 I2C_BOARD_INFO("pcf8563", 0x51),
85 static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
87 return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
90 static const struct mxc_usbh_platform_data otg_pdata __initconst = {
91 .init = eukrea_cpuimx25_otg_init,
92 .portsc = MXC_EHCI_MODE_UTMI,
95 static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
97 return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
98 MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
101 static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
102 .init = eukrea_cpuimx25_usbh2_init,
103 .portsc = MXC_EHCI_MODE_SERIAL,
106 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
107 .operating_mode = FSL_USB2_DR_DEVICE,
108 .phy_mode = FSL_USB2_PHY_UTMI,
109 .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
112 static bool otg_mode_host __initdata;
114 static int __init eukrea_cpuimx25_otg_mode(char *options)
116 if (!strcmp(options, "host"))
117 otg_mode_host = true;
118 else if (!strcmp(options, "device"))
119 otg_mode_host = false;
120 else
121 pr_info("otg_mode neither \"host\" nor \"device\". "
122 "Defaulting to device\n");
123 return 1;
125 __setup("otg_mode=", eukrea_cpuimx25_otg_mode);
127 static void __init eukrea_cpuimx25_init(void)
129 imx25_soc_init();
131 if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
132 ARRAY_SIZE(eukrea_cpuimx25_pads)))
133 printk(KERN_ERR "error setting cpuimx25 pads !\n");
135 imx25_add_imx_uart0(&uart_pdata);
136 imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
137 imx25_add_imxdi_rtc();
138 imx25_add_fec(&mx25_fec_pdata);
139 imx25_add_imx2_wdt();
141 i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
142 ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
143 imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
145 if (otg_mode_host)
146 imx25_add_mxc_ehci_otg(&otg_pdata);
147 else
148 imx25_add_fsl_usb2_udc(&otg_device_pdata);
150 imx25_add_mxc_ehci_hs(&usbh2_pdata);
152 #ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
153 eukrea_mbimxsd25_baseboard_init();
154 #endif
157 static void __init eukrea_cpuimx25_timer_init(void)
159 mx25_clocks_init();
162 MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
163 /* Maintainer: Eukrea Electromatique */
164 .atag_offset = 0x100,
165 .map_io = mx25_map_io,
166 .init_early = imx25_init_early,
167 .init_irq = mx25_init_irq,
168 .init_time = eukrea_cpuimx25_timer_init,
169 .init_machine = eukrea_cpuimx25_init,
170 .restart = mxc_restart,
171 MACHINE_END