2 * linux/arch/arm/mach-omap1/board-voiceblue.c
4 * Modified from board-generic.c
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/notifier.h>
24 #include <linux/reboot.h>
25 #include <linux/serial_8250.h>
26 #include <linux/serial_reg.h>
27 #include <linux/smc91x.h>
28 #include <linux/export.h>
29 #include <linux/reboot.h>
31 #include <asm/mach-types.h>
32 #include <asm/mach/arch.h>
33 #include <asm/mach/map.h>
35 #include <mach/board-voiceblue.h>
36 #include <mach/flash.h>
40 #include <mach/hardware.h>
45 static struct plat_serial8250_port voiceblue_ports
[] = {
47 .mapbase
= (unsigned long)(OMAP_CS1_PHYS
+ 0x40000),
48 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
54 .mapbase
= (unsigned long)(OMAP_CS1_PHYS
+ 0x50000),
55 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
61 .mapbase
= (unsigned long)(OMAP_CS1_PHYS
+ 0x60000),
62 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
68 .mapbase
= (unsigned long)(OMAP_CS1_PHYS
+ 0x70000),
69 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
77 static struct platform_device serial_device
= {
79 .id
= PLAT8250_DEV_PLATFORM1
,
82 static int __init
ext_uart_init(void)
84 if (!machine_is_voiceblue())
87 voiceblue_ports
[0].irq
= gpio_to_irq(12);
88 voiceblue_ports
[1].irq
= gpio_to_irq(13);
89 voiceblue_ports
[2].irq
= gpio_to_irq(14);
90 voiceblue_ports
[3].irq
= gpio_to_irq(15);
91 serial_device
.dev
.platform_data
= voiceblue_ports
;
92 return platform_device_register(&serial_device
);
94 arch_initcall(ext_uart_init
);
96 static struct physmap_flash_data voiceblue_flash_data
= {
98 .set_vpp
= omap1_set_vpp
,
101 static struct resource voiceblue_flash_resource
= {
102 .start
= OMAP_CS0_PHYS
,
103 .end
= OMAP_CS0_PHYS
+ SZ_32M
- 1,
104 .flags
= IORESOURCE_MEM
,
107 static struct platform_device voiceblue_flash_device
= {
108 .name
= "physmap-flash",
111 .platform_data
= &voiceblue_flash_data
,
114 .resource
= &voiceblue_flash_resource
,
117 static struct smc91x_platdata voiceblue_smc91x_info
= {
118 .flags
= SMC91X_USE_16BIT
| SMC91X_NOWAIT
,
119 .leda
= RPC_LED_100_10
,
120 .ledb
= RPC_LED_TX_RX
,
123 static struct resource voiceblue_smc91x_resources
[] = {
125 .start
= OMAP_CS2_PHYS
+ 0x300,
126 .end
= OMAP_CS2_PHYS
+ 0x300 + 16,
127 .flags
= IORESOURCE_MEM
,
130 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE
,
134 static struct platform_device voiceblue_smc91x_device
= {
138 .platform_data
= &voiceblue_smc91x_info
,
140 .num_resources
= ARRAY_SIZE(voiceblue_smc91x_resources
),
141 .resource
= voiceblue_smc91x_resources
,
144 static struct platform_device
*voiceblue_devices
[] __initdata
= {
145 &voiceblue_flash_device
,
146 &voiceblue_smc91x_device
,
149 static struct omap_usb_config voiceblue_usb_config __initdata
= {
158 #define MACHINE_PANICED 1
159 #define MACHINE_REBOOTING 2
160 #define MACHINE_REBOOT 4
161 static unsigned long machine_state
;
163 static int panic_event(struct notifier_block
*this, unsigned long event
,
166 if (test_and_set_bit(MACHINE_PANICED
, &machine_state
))
169 /* Flash power LED */
170 omap_writeb(0x78, OMAP_LPG1_LCR
);
171 omap_writeb(0x01, OMAP_LPG1_PMR
); /* Enable clock */
176 static struct notifier_block panic_block
= {
177 .notifier_call
= panic_event
,
180 static int __init
voiceblue_setup(void)
182 if (!machine_is_voiceblue())
185 /* Setup panic notifier */
186 atomic_notifier_chain_register(&panic_notifier_list
, &panic_block
);
190 postcore_initcall(voiceblue_setup
);
192 static int wdt_gpio_state
;
194 void voiceblue_wdt_enable(void)
196 gpio_direction_output(0, 0);
197 gpio_set_value(0, 1);
198 gpio_set_value(0, 0);
202 void voiceblue_wdt_disable(void)
204 gpio_set_value(0, 0);
205 gpio_set_value(0, 1);
206 gpio_set_value(0, 0);
207 gpio_direction_input(0);
210 void voiceblue_wdt_ping(void)
212 if (test_bit(MACHINE_REBOOT
, &machine_state
))
215 wdt_gpio_state
= !wdt_gpio_state
;
216 gpio_set_value(0, wdt_gpio_state
);
219 static void voiceblue_restart(enum reboot_mode mode
, const char *cmd
)
222 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
223 * "Global Software Reset Affects Traffic Controller Frequency".
225 if (cpu_is_omap5912()) {
226 omap_writew(omap_readw(DPLL_CTL
) & ~(1 << 4), DPLL_CTL
);
227 omap_writew(0x8, ARM_RSTCT1
);
230 set_bit(MACHINE_REBOOT
, &machine_state
);
231 voiceblue_wdt_enable();
235 EXPORT_SYMBOL(voiceblue_wdt_enable
);
236 EXPORT_SYMBOL(voiceblue_wdt_disable
);
237 EXPORT_SYMBOL(voiceblue_wdt_ping
);
239 static void __init
voiceblue_init(void)
241 /* mux pins for uarts */
242 omap_cfg_reg(UART1_TX
);
243 omap_cfg_reg(UART1_RTS
);
244 omap_cfg_reg(UART2_TX
);
245 omap_cfg_reg(UART2_RTS
);
246 omap_cfg_reg(UART3_TX
);
247 omap_cfg_reg(UART3_RX
);
250 gpio_request(0, "Watchdog");
252 gpio_request(7, "SMC91x reset");
253 gpio_direction_output(7, 1);
254 udelay(2); /* wait at least 100ns */
255 gpio_set_value(7, 0);
256 mdelay(50); /* 50ms until PHY ready */
257 /* smc91x interrupt pin */
258 gpio_request(8, "SMC91x irq");
260 gpio_request(6, "16C554 reset");
261 gpio_direction_output(6, 0);
262 /* 16C554 interrupt pins */
263 gpio_request(12, "16C554 irq");
264 gpio_request(13, "16C554 irq");
265 gpio_request(14, "16C554 irq");
266 gpio_request(15, "16C554 irq");
267 irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING
);
268 irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING
);
269 irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING
);
270 irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING
);
272 voiceblue_smc91x_resources
[1].start
= gpio_to_irq(8);
273 voiceblue_smc91x_resources
[1].end
= gpio_to_irq(8);
274 platform_add_devices(voiceblue_devices
, ARRAY_SIZE(voiceblue_devices
));
276 omap1_usb_init(&voiceblue_usb_config
);
277 omap_register_i2c_bus(1, 100, NULL
, 0);
279 /* There is a good chance board is going up, so enable power LED
280 * (it is connected through invertor) */
281 omap_writeb(0x00, OMAP_LPG1_LCR
);
282 omap_writeb(0x00, OMAP_LPG1_PMR
); /* Disable clock */
285 MACHINE_START(VOICEBLUE
, "VoiceBlue OMAP5910")
286 /* Maintainer: Ladislav Michl <michl@2n.cz> */
287 .atag_offset
= 0x100,
288 .map_io
= omap15xx_map_io
,
289 .init_early
= omap1_init_early
,
290 .init_irq
= omap1_init_irq
,
291 .init_machine
= voiceblue_init
,
292 .init_late
= omap1_init_late
,
293 .init_time
= omap1_timer_init
,
294 .restart
= voiceblue_restart
,