arch/arm/mach-omap2/gpmc-nand.c

   1 /*
   2  * gpmc-nand.c
   3  *
   4  * Copyright (C) 2009 Texas Instruments
   5  * Vimal Singh <vimalsingh@ti.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/io.h>
  15 #include <linux/mtd/nand.h>
  16 #include <linux/platform_data/mtd-nand-omap2.h>
  17
  18 #include <asm/mach/flash.h>
  19
  20 #include "gpmc.h"
  21 #include "soc.h"
  22 #include "gpmc-nand.h"
  23
  24 /* minimum size for IO mapping */
  25 #define NAND_IO_SIZE    4
  26
  27 static struct resource gpmc_nand_resource[] = {
  28         {
  29                 .flags          = IORESOURCE_MEM,
  30         },
  31         {
  32                 .flags          = IORESOURCE_IRQ,
  33         },
  34         {
  35                 .flags          = IORESOURCE_IRQ,
  36         },
  37 };
  38
  39 static struct platform_device gpmc_nand_device = {
  40         .name           = "omap2-nand",
  41         .id             = 0,
  42         .num_resources  = ARRAY_SIZE(gpmc_nand_resource),
  43         .resource       = gpmc_nand_resource,
  44 };
  45
  46 static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
  47 {
  48         /* platforms which support all ECC schemes */
  49         if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() ||
  50                  soc_is_omap54xx() || soc_is_dra7xx())
  51                 return 1;
  52
  53         /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
  54          * which require H/W based ECC error detection */
  55         if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
  56             ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
  57                  (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
  58                 return 0;
  59
  60         /*
  61          * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
  62          * and AM33xx derivates. Other chips may be added if confirmed to work.
  63          */
  64         if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) &&
  65             (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)))
  66                 return 0;
  67
  68         /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
  69         if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
  70                 return 1;
  71         else
  72                 return 0;
  73 }
  74
  75 /* This function will go away once the device-tree convertion is complete */
  76 static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data,
  77                             struct gpmc_settings *s)
  78 {
  79         /* Enable RD PIN Monitoring Reg */
  80         if (gpmc_nand_data->dev_ready) {
  81                 s->wait_on_read = true;
  82                 s->wait_on_write = true;
  83         }
  84
  85         if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
  86                 s->device_width = GPMC_DEVWIDTH_16BIT;
  87         else
  88                 s->device_width = GPMC_DEVWIDTH_8BIT;
  89 }
  90
  91 int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
  92                    struct gpmc_timings *gpmc_t)
  93 {
  94         int err = 0;
  95         struct gpmc_settings s;
  96         struct device *dev = &gpmc_nand_device.dev;
  97
  98         memset(&s, 0, sizeof(struct gpmc_settings));
  99
 100         gpmc_nand_device.dev.platform_data = gpmc_nand_data;
 101
 102         err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
 103                                 (unsigned long *)&gpmc_nand_resource[0].start);
 104         if (err < 0) {
 105                 dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
 106                         gpmc_nand_data->cs, err);
 107                 return err;
 108         }
 109
 110         gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
 111                                                         NAND_IO_SIZE - 1;
 112
 113         gpmc_nand_resource[1].start =
 114                                 gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
 115         gpmc_nand_resource[2].start =
 116                                 gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
 117
 118         if (gpmc_t) {
 119                 err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
 120                 if (err < 0) {
 121                         dev_err(dev, "Unable to set gpmc timings: %d\n", err);
 122                         return err;
 123                 }
 124         }
 125
 126         if (gpmc_nand_data->of_node)
 127                 gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
 128         else
 129                 gpmc_set_legacy(gpmc_nand_data, &s);
 130
 131         s.device_nand = true;
 132
 133         err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
 134         if (err < 0)
 135                 goto out_free_cs;
 136
 137         err = gpmc_configure(GPMC_CONFIG_WP, 0);
 138         if (err < 0)
 139                 goto out_free_cs;
 140
 141         gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
 142
 143         if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
 144                 dev_err(dev, "Unsupported NAND ECC scheme selected\n");
 145                 return -EINVAL;
 146         }
 147
 148         err = platform_device_register(&gpmc_nand_device);
 149         if (err < 0) {
 150                 dev_err(dev, "Unable to register NAND device\n");
 151                 goto out_free_cs;
 152         }
 153
 154         return 0;
 155
 156 out_free_cs:
 157         gpmc_cs_free(gpmc_nand_data->cs);
 158
 159         return err;
 160 }