arch/arm/mach-omap2/usb-musb.c

   1 /*
   2  * linux/arch/arm/mach-omap2/usb-musb.c
   3  *
   4  * This file will contain the board specific details for the
   5  * MENTOR USB OTG controller on OMAP3430
   6  *
   7  * Copyright (C) 2007-2008 Texas Instruments
   8  * Copyright (C) 2008 Nokia Corporation
   9  * Author: Vikram Pandita
  10  *
  11  * Generalization by:
  12  * Felipe Balbi <felipe.balbi@nokia.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18
  19 #include <linux/types.h>
  20 #include <linux/errno.h>
  21 #include <linux/delay.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/clk.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/io.h>
  26 #include <linux/usb/musb.h>
  27
  28 #include "omap_device.h"
  29 #include "soc.h"
  30 #include "mux.h"
  31 #include "usb.h"
  32
  33 static struct musb_hdrc_config musb_config = {
  34         .multipoint     = 1,
  35         .dyn_fifo       = 1,
  36         .num_eps        = 16,
  37         .ram_bits       = 12,
  38 };
  39
  40 static struct musb_hdrc_platform_data musb_plat = {
  41         .mode           = MUSB_OTG,
  42
  43         /* .clock is set dynamically */
  44         .config         = &musb_config,
  45
  46         /* REVISIT charge pump on TWL4030 can supply up to
  47          * 100 mA ... but this value is board-specific, like
  48          * "mode", and should be passed to usb_musb_init().
  49          */
  50         .power          = 50,                   /* up to 100 mA */
  51 };
  52
  53 static u64 musb_dmamask = DMA_BIT_MASK(32);
  54
  55 static struct omap_musb_board_data musb_default_board_data = {
  56         .interface_type         = MUSB_INTERFACE_ULPI,
  57         .mode                   = MUSB_OTG,
  58         .power                  = 100,
  59 };
  60
  61 void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
  62 {
  63         struct omap_hwmod               *oh;
  64         struct platform_device          *pdev;
  65         struct device                   *dev;
  66         int                             bus_id = -1;
  67         const char                      *oh_name, *name;
  68         struct omap_musb_board_data     *board_data;
  69
  70         if (musb_board_data)
  71                 board_data = musb_board_data;
  72         else
  73                 board_data = &musb_default_board_data;
  74
  75         /*
  76          * REVISIT: This line can be removed once all the platforms using
  77          * musb_core.c have been converted to use use clkdev.
  78          */
  79         musb_plat.clock = "ick";
  80         musb_plat.board_data = board_data;
  81         musb_plat.power = board_data->power >> 1;
  82         musb_plat.mode = board_data->mode;
  83         musb_plat.extvbus = board_data->extvbus;
  84
  85         if (soc_is_am35xx()) {
  86                 oh_name = "am35x_otg_hs";
  87                 name = "musb-am35x";
  88         } else if (cpu_is_ti81xx()) {
  89                 oh_name = "usb_otg_hs";
  90                 name = "musb-ti81xx";
  91         } else {
  92                 oh_name = "usb_otg_hs";
  93                 name = "musb-omap2430";
  94         }
  95
  96         oh = omap_hwmod_lookup(oh_name);
  97         if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
  98                  __func__, oh_name))
  99                 return;
 100
 101         pdev = omap_device_build(name, bus_id, oh, &musb_plat,
 102                                  sizeof(musb_plat));
 103         if (IS_ERR(pdev)) {
 104                 pr_err("Could not build omap_device for %s %s\n",
 105                                                 name, oh_name);
 106                 return;
 107         }
 108
 109         dev = &pdev->dev;
 110         get_device(dev);
 111         dev->dma_mask = &musb_dmamask;
 112         dev->coherent_dma_mask = musb_dmamask;
 113         put_device(dev);
 114 }