arch/arm/mach-s3c24xx/mach-anubis.c

   1 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
   2  *
   3  * Copyright 2003-2009 Simtec Electronics
   4  *      http://armlinux.simtec.co.uk/
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/list.h>
  16 #include <linux/timer.h>
  17 #include <linux/init.h>
  18 #include <linux/gpio.h>
  19 #include <linux/serial_core.h>
  20 #include <linux/serial_s3c.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/ata_platform.h>
  23 #include <linux/i2c.h>
  24 #include <linux/io.h>
  25 #include <linux/sm501.h>
  26 #include <linux/sm501-regs.h>
  27
  28 #include <asm/mach/arch.h>
  29 #include <asm/mach/map.h>
  30 #include <asm/mach/irq.h>
  31
  32 #include <mach/hardware.h>
  33 #include <asm/irq.h>
  34 #include <asm/mach-types.h>
  35
  36 #include <mach/regs-gpio.h>
  37 #include <mach/regs-lcd.h>
  38 #include <mach/gpio-samsung.h>
  39 #include <linux/platform_data/mtd-nand-s3c2410.h>
  40 #include <linux/platform_data/i2c-s3c2410.h>
  41
  42 #include <linux/mtd/mtd.h>
  43 #include <linux/mtd/nand.h>
  44 #include <linux/mtd/nand_ecc.h>
  45 #include <linux/mtd/partitions.h>
  46
  47 #include <net/ax88796.h>
  48
  49 #include <plat/devs.h>
  50 #include <plat/cpu.h>
  51 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
  52 #include <plat/samsung-time.h>
  53
  54 #include "anubis.h"
  55 #include "common.h"
  56 #include "simtec.h"
  57
  58 #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
  59
  60 static struct map_desc anubis_iodesc[] __initdata = {
  61   /* ISA IO areas */
  62
  63   {
  64         .virtual        = (u32)S3C24XX_VA_ISA_BYTE,
  65         .pfn            = __phys_to_pfn(0x0),
  66         .length         = SZ_4M,
  67         .type           = MT_DEVICE,
  68   }, {
  69         .virtual        = (u32)S3C24XX_VA_ISA_WORD,
  70         .pfn            = __phys_to_pfn(0x0),
  71         .length         = SZ_4M,
  72         .type           = MT_DEVICE,
  73   },
  74
  75   /* we could possibly compress the next set down into a set of smaller tables
  76    * pagetables, but that would mean using an L2 section, and it still means
  77    * we cannot actually feed the same register to an LDR due to 16K spacing
  78    */
  79
  80   /* CPLD control registers */
  81
  82   {
  83         .virtual        = (u32)ANUBIS_VA_CTRL1,
  84         .pfn            = __phys_to_pfn(ANUBIS_PA_CTRL1),
  85         .length         = SZ_4K,
  86         .type           = MT_DEVICE,
  87   }, {
  88         .virtual        = (u32)ANUBIS_VA_IDREG,
  89         .pfn            = __phys_to_pfn(ANUBIS_PA_IDREG),
  90         .length         = SZ_4K,
  91         .type           = MT_DEVICE,
  92   },
  93 };
  94
  95 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
  96 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
  97 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  98
  99 static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
 100         [0] = {
 101                 .hwport      = 0,
 102                 .flags       = 0,
 103                 .ucon        = UCON,
 104                 .ulcon       = ULCON,
 105                 .ufcon       = UFCON,
 106                 .clk_sel        = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 107         },
 108         [1] = {
 109                 .hwport      = 2,
 110                 .flags       = 0,
 111                 .ucon        = UCON,
 112                 .ulcon       = ULCON,
 113                 .ufcon       = UFCON,
 114                 .clk_sel        = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 115         },
 116 };
 117
 118 /* NAND Flash on Anubis board */
 119
 120 static int external_map[]   = { 2 };
 121 static int chip0_map[]      = { 0 };
 122 static int chip1_map[]      = { 1 };
 123
 124 static struct mtd_partition __initdata anubis_default_nand_part[] = {
 125         [0] = {
 126                 .name   = "Boot Agent",
 127                 .size   = SZ_16K,
 128                 .offset = 0,
 129         },
 130         [1] = {
 131                 .name   = "/boot",
 132                 .size   = SZ_4M - SZ_16K,
 133                 .offset = SZ_16K,
 134         },
 135         [2] = {
 136                 .name   = "user1",
 137                 .offset = SZ_4M,
 138                 .size   = SZ_32M - SZ_4M,
 139         },
 140         [3] = {
 141                 .name   = "user2",
 142                 .offset = SZ_32M,
 143                 .size   = MTDPART_SIZ_FULL,
 144         }
 145 };
 146
 147 static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
 148         [0] = {
 149                 .name   = "Boot Agent",
 150                 .size   = SZ_128K,
 151                 .offset = 0,
 152         },
 153         [1] = {
 154                 .name   = "/boot",
 155                 .size   = SZ_4M - SZ_128K,
 156                 .offset = SZ_128K,
 157         },
 158         [2] = {
 159                 .name   = "user1",
 160                 .offset = SZ_4M,
 161                 .size   = SZ_32M - SZ_4M,
 162         },
 163         [3] = {
 164                 .name   = "user2",
 165                 .offset = SZ_32M,
 166                 .size   = MTDPART_SIZ_FULL,
 167         }
 168 };
 169
 170 /* the Anubis has 3 selectable slots for nand-flash, the two
 171  * on-board chip areas, as well as the external slot.
 172  *
 173  * Note, there is no current hot-plug support for the External
 174  * socket.
 175 */
 176
 177 static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
 178         [1] = {
 179                 .name           = "External",
 180                 .nr_chips       = 1,
 181                 .nr_map         = external_map,
 182                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 183                 .partitions     = anubis_default_nand_part,
 184         },
 185         [0] = {
 186                 .name           = "chip0",
 187                 .nr_chips       = 1,
 188                 .nr_map         = chip0_map,
 189                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 190                 .partitions     = anubis_default_nand_part,
 191         },
 192         [2] = {
 193                 .name           = "chip1",
 194                 .nr_chips       = 1,
 195                 .nr_map         = chip1_map,
 196                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 197                 .partitions     = anubis_default_nand_part,
 198         },
 199 };
 200
 201 static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
 202 {
 203         unsigned int tmp;
 204
 205         slot = set->nr_map[slot] & 3;
 206
 207         pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
 208                  slot, set, set->nr_map);
 209
 210         tmp = __raw_readb(ANUBIS_VA_CTRL1);
 211         tmp &= ~ANUBIS_CTRL1_NANDSEL;
 212         tmp |= slot;
 213
 214         pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
 215
 216         __raw_writeb(tmp, ANUBIS_VA_CTRL1);
 217 }
 218
 219 static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 220         .tacls          = 25,
 221         .twrph0         = 55,
 222         .twrph1         = 40,
 223         .nr_sets        = ARRAY_SIZE(anubis_nand_sets),
 224         .sets           = anubis_nand_sets,
 225         .select_chip    = anubis_nand_select,
 226 };
 227
 228 /* IDE channels */
 229
 230 static struct pata_platform_info anubis_ide_platdata = {
 231         .ioport_shift   = 5,
 232 };
 233
 234 static struct resource anubis_ide0_resource[] = {
 235         [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
 236         [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
 237         [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
 238 };
 239
 240 static struct platform_device anubis_device_ide0 = {
 241         .name           = "pata_platform",
 242         .id             = 0,
 243         .num_resources  = ARRAY_SIZE(anubis_ide0_resource),
 244         .resource       = anubis_ide0_resource,
 245         .dev    = {
 246                 .platform_data = &anubis_ide_platdata,
 247                 .coherent_dma_mask = ~0,
 248         },
 249 };
 250
 251 static struct resource anubis_ide1_resource[] = {
 252         [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
 253         [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
 254         [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
 255 };
 256
 257 static struct platform_device anubis_device_ide1 = {
 258         .name           = "pata_platform",
 259         .id             = 1,
 260         .num_resources  = ARRAY_SIZE(anubis_ide1_resource),
 261         .resource       = anubis_ide1_resource,
 262         .dev    = {
 263                 .platform_data = &anubis_ide_platdata,
 264                 .coherent_dma_mask = ~0,
 265         },
 266 };
 267
 268 /* Asix AX88796 10/100 ethernet controller */
 269
 270 static struct ax_plat_data anubis_asix_platdata = {
 271         .flags          = AXFLG_MAC_FROMDEV,
 272         .wordlength     = 2,
 273         .dcr_val        = 0x48,
 274         .rcr_val        = 0x40,
 275 };
 276
 277 static struct resource anubis_asix_resource[] = {
 278         [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
 279         [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
 280 };
 281
 282 static struct platform_device anubis_device_asix = {
 283         .name           = "ax88796",
 284         .id             = 0,
 285         .num_resources  = ARRAY_SIZE(anubis_asix_resource),
 286         .resource       = anubis_asix_resource,
 287         .dev            = {
 288                 .platform_data = &anubis_asix_platdata,
 289         }
 290 };
 291
 292 /* SM501 */
 293
 294 static struct resource anubis_sm501_resource[] = {
 295         [0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
 296         [1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
 297         [2] = DEFINE_RES_IRQ(IRQ_EINT0),
 298 };
 299
 300 static struct sm501_initdata anubis_sm501_initdata = {
 301         .gpio_high      = {
 302                 .set    = 0x3F000000,           /* 24bit panel */
 303                 .mask   = 0x0,
 304         },
 305         .misc_timing    = {
 306                 .set    = 0x010100,             /* SDRAM timing */
 307                 .mask   = 0x1F1F00,
 308         },
 309         .misc_control   = {
 310                 .set    = SM501_MISC_PNL_24BIT,
 311                 .mask   = 0,
 312         },
 313
 314         .devices        = SM501_USE_GPIO,
 315
 316         /* set the SDRAM and bus clocks */
 317         .mclk           = 72 * MHZ,
 318         .m1xclk         = 144 * MHZ,
 319 };
 320
 321 static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 322         [0] = {
 323                 .bus_num        = 1,
 324                 .pin_scl        = 44,
 325                 .pin_sda        = 45,
 326         },
 327         [1] = {
 328                 .bus_num        = 2,
 329                 .pin_scl        = 40,
 330                 .pin_sda        = 41,
 331         },
 332 };
 333
 334 static struct sm501_platdata anubis_sm501_platdata = {
 335         .init           = &anubis_sm501_initdata,
 336         .gpio_base      = -1,
 337         .gpio_i2c       = anubis_sm501_gpio_i2c,
 338         .gpio_i2c_nr    = ARRAY_SIZE(anubis_sm501_gpio_i2c),
 339 };
 340
 341 static struct platform_device anubis_device_sm501 = {
 342         .name           = "sm501",
 343         .id             = 0,
 344         .num_resources  = ARRAY_SIZE(anubis_sm501_resource),
 345         .resource       = anubis_sm501_resource,
 346         .dev            = {
 347                 .platform_data = &anubis_sm501_platdata,
 348         },
 349 };
 350
 351 /* Standard Anubis devices */
 352
 353 static struct platform_device *anubis_devices[] __initdata = {
 354         &s3c2410_device_dclk,
 355         &s3c_device_ohci,
 356         &s3c_device_wdt,
 357         &s3c_device_adc,
 358         &s3c_device_i2c0,
 359         &s3c_device_rtc,
 360         &s3c_device_nand,
 361         &anubis_device_ide0,
 362         &anubis_device_ide1,
 363         &anubis_device_asix,
 364         &anubis_device_sm501,
 365 };
 366
 367 /* I2C devices. */
 368
 369 static struct i2c_board_info anubis_i2c_devs[] __initdata = {
 370         {
 371                 I2C_BOARD_INFO("tps65011", 0x48),
 372                 .irq    = IRQ_EINT20,
 373         }
 374 };
 375
 376 /* Audio setup */
 377 static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
 378         .have_mic       = 1,
 379         .have_lout      = 1,
 380         .output_cdclk   = 1,
 381         .use_mpllin     = 1,
 382         .amp_gpio       = S3C2410_GPB(2),
 383         .amp_gain[0]    = S3C2410_GPD(10),
 384         .amp_gain[1]    = S3C2410_GPD(11),
 385 };
 386
 387 static void __init anubis_map_io(void)
 388 {
 389         s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 390         s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 391         samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 392
 393         /* check for the newer revision boards with large page nand */
 394
 395         if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
 396                 printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
 397                        __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
 398                 anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
 399                 anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 400         } else {
 401                 /* ensure that the GPIO is setup */
 402                 gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
 403                 gpio_free(S3C2410_GPA(0));
 404         }
 405 }
 406
 407 static void __init anubis_init_time(void)
 408 {
 409         s3c2440_init_clocks(12000000);
 410         samsung_timer_init();
 411 }
 412
 413 static void __init anubis_init(void)
 414 {
 415         s3c_i2c0_set_platdata(NULL);
 416         s3c_nand_set_platdata(&anubis_nand_info);
 417         simtec_audio_add(NULL, false, &anubis_audio);
 418
 419         platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 420
 421         i2c_register_board_info(0, anubis_i2c_devs,
 422                                 ARRAY_SIZE(anubis_i2c_devs));
 423 }
 424
 425
 426 MACHINE_START(ANUBIS, "Simtec-Anubis")
 427         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 428         .atag_offset    = 0x100,
 429         .map_io         = anubis_map_io,
 430         .init_machine   = anubis_init,
 431         .init_irq       = s3c2440_init_irq,
 432         .init_time      = anubis_init_time,
 433         .restart        = s3c244x_restart,
 434 MACHINE_END