Merge tag 'locks-v3.16-2' of git://git.samba.org/jlayton/linux
[linux/fpc-iii.git] / arch / arm / mach-shmobile / board-marzen.c
blobd832a4477b4bdb8e46970c49ed1b45843405cf45
1 /*
2 * marzen board support
4 * Copyright (C) 2011, 2013 Renesas Solutions Corp.
5 * Copyright (C) 2011 Magnus Damm
6 * Copyright (C) 2013 Cogent Embedded, Inc.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; version 2 of the License.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/interrupt.h>
25 #include <linux/irq.h>
26 #include <linux/platform_device.h>
27 #include <linux/delay.h>
28 #include <linux/io.h>
29 #include <linux/leds.h>
30 #include <linux/dma-mapping.h>
31 #include <linux/pinctrl/machine.h>
32 #include <linux/platform_data/camera-rcar.h>
33 #include <linux/platform_data/gpio-rcar.h>
34 #include <linux/platform_data/rcar-du.h>
35 #include <linux/platform_data/usb-rcar-phy.h>
36 #include <linux/regulator/fixed.h>
37 #include <linux/regulator/machine.h>
38 #include <linux/smsc911x.h>
39 #include <linux/spi/spi.h>
40 #include <linux/spi/sh_hspi.h>
41 #include <linux/mmc/host.h>
42 #include <linux/mmc/sh_mobile_sdhi.h>
43 #include <linux/mfd/tmio.h>
44 #include <media/soc_camera.h>
45 #include <mach/r8a7779.h>
46 #include <mach/common.h>
47 #include <mach/irqs.h>
48 #include <asm/mach-types.h>
49 #include <asm/mach/arch.h>
50 #include <asm/traps.h>
52 /* Fixed 3.3V regulator to be used by SDHI0 */
53 static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
54 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
55 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
58 /* Dummy supplies, where voltage doesn't matter */
59 static struct regulator_consumer_supply dummy_supplies[] = {
60 REGULATOR_SUPPLY("vddvario", "smsc911x"),
61 REGULATOR_SUPPLY("vdd33a", "smsc911x"),
64 /* USB PHY */
65 static struct resource usb_phy_resources[] = {
66 [0] = {
67 .start = 0xffe70800,
68 .end = 0xffe70900 - 1,
69 .flags = IORESOURCE_MEM,
73 static struct rcar_phy_platform_data usb_phy_platform_data;
75 static struct platform_device usb_phy = {
76 .name = "rcar_usb_phy",
77 .id = -1,
78 .dev = {
79 .platform_data = &usb_phy_platform_data,
81 .resource = usb_phy_resources,
82 .num_resources = ARRAY_SIZE(usb_phy_resources),
85 /* SMSC LAN89218 */
86 static struct resource smsc911x_resources[] = {
87 [0] = {
88 .start = 0x18000000, /* ExCS0 */
89 .end = 0x180000ff, /* A1->A7 */
90 .flags = IORESOURCE_MEM,
92 [1] = {
93 .start = irq_pin(1), /* IRQ 1 */
94 .flags = IORESOURCE_IRQ,
98 static struct smsc911x_platform_config smsc911x_platdata = {
99 .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
100 .phy_interface = PHY_INTERFACE_MODE_MII,
101 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
102 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
105 static struct platform_device eth_device = {
106 .name = "smsc911x",
107 .id = -1,
108 .dev = {
109 .platform_data = &smsc911x_platdata,
111 .resource = smsc911x_resources,
112 .num_resources = ARRAY_SIZE(smsc911x_resources),
115 static struct resource sdhi0_resources[] = {
116 [0] = {
117 .name = "sdhi0",
118 .start = 0xffe4c000,
119 .end = 0xffe4c0ff,
120 .flags = IORESOURCE_MEM,
122 [1] = {
123 .start = gic_iid(0x88),
124 .flags = IORESOURCE_IRQ,
128 static struct sh_mobile_sdhi_info sdhi0_platform_data = {
129 .dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX,
130 .dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX,
131 .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
132 .tmio_caps = MMC_CAP_SD_HIGHSPEED,
135 static struct platform_device sdhi0_device = {
136 .name = "sh_mobile_sdhi",
137 .num_resources = ARRAY_SIZE(sdhi0_resources),
138 .resource = sdhi0_resources,
139 .id = 0,
140 .dev = {
141 .platform_data = &sdhi0_platform_data,
145 /* Thermal */
146 static struct resource thermal_resources[] = {
147 [0] = {
148 .start = 0xFFC48000,
149 .end = 0xFFC48038 - 1,
150 .flags = IORESOURCE_MEM,
154 static struct platform_device thermal_device = {
155 .name = "rcar_thermal",
156 .resource = thermal_resources,
157 .num_resources = ARRAY_SIZE(thermal_resources),
160 /* HSPI */
161 static struct resource hspi_resources[] = {
162 [0] = {
163 .start = 0xFFFC7000,
164 .end = 0xFFFC7018 - 1,
165 .flags = IORESOURCE_MEM,
169 static struct platform_device hspi_device = {
170 .name = "sh-hspi",
171 .id = 0,
172 .resource = hspi_resources,
173 .num_resources = ARRAY_SIZE(hspi_resources),
177 * DU
179 * The panel only specifies the [hv]display and [hv]total values. The position
180 * and width of the sync pulses don't matter, they're copied from VESA timings.
182 static struct rcar_du_encoder_data du_encoders[] = {
184 .type = RCAR_DU_ENCODER_VGA,
185 .output = RCAR_DU_OUTPUT_DPAD0,
186 }, {
187 .type = RCAR_DU_ENCODER_LVDS,
188 .output = RCAR_DU_OUTPUT_DPAD1,
189 .connector.lvds.panel = {
190 .width_mm = 210,
191 .height_mm = 158,
192 .mode = {
193 .clock = 65000,
194 .hdisplay = 1024,
195 .hsync_start = 1048,
196 .hsync_end = 1184,
197 .htotal = 1344,
198 .vdisplay = 768,
199 .vsync_start = 771,
200 .vsync_end = 777,
201 .vtotal = 806,
202 .flags = 0,
208 static const struct rcar_du_platform_data du_pdata __initconst = {
209 .encoders = du_encoders,
210 .num_encoders = ARRAY_SIZE(du_encoders),
213 static const struct resource du_resources[] __initconst = {
214 DEFINE_RES_MEM(0xfff80000, 0x40000),
215 DEFINE_RES_IRQ(gic_iid(0x3f)),
218 static void __init marzen_add_du_device(void)
220 struct platform_device_info info = {
221 .name = "rcar-du-r8a7779",
222 .id = -1,
223 .res = du_resources,
224 .num_res = ARRAY_SIZE(du_resources),
225 .data = &du_pdata,
226 .size_data = sizeof(du_pdata),
227 .dma_mask = DMA_BIT_MASK(32),
230 platform_device_register_full(&info);
233 /* LEDS */
234 static struct gpio_led marzen_leds[] = {
236 .name = "led2",
237 .gpio = RCAR_GP_PIN(4, 29),
238 .default_state = LEDS_GPIO_DEFSTATE_ON,
239 }, {
240 .name = "led3",
241 .gpio = RCAR_GP_PIN(4, 30),
242 .default_state = LEDS_GPIO_DEFSTATE_ON,
243 }, {
244 .name = "led4",
245 .gpio = RCAR_GP_PIN(4, 31),
246 .default_state = LEDS_GPIO_DEFSTATE_ON,
250 static struct gpio_led_platform_data marzen_leds_pdata = {
251 .leds = marzen_leds,
252 .num_leds = ARRAY_SIZE(marzen_leds),
255 static struct platform_device leds_device = {
256 .name = "leds-gpio",
257 .id = 0,
258 .dev = {
259 .platform_data = &marzen_leds_pdata,
263 /* VIN */
264 static struct rcar_vin_platform_data vin_platform_data __initdata = {
265 .flags = RCAR_VIN_BT656,
268 #define MARZEN_VIN(idx) \
269 static struct resource vin##idx##_resources[] __initdata = { \
270 DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
271 DEFINE_RES_IRQ(gic_iid(0x5f + (idx))), \
272 }; \
274 static struct platform_device_info vin##idx##_info __initdata = { \
275 .parent = &platform_bus, \
276 .name = "r8a7779-vin", \
277 .id = idx, \
278 .res = vin##idx##_resources, \
279 .num_res = ARRAY_SIZE(vin##idx##_resources), \
280 .dma_mask = DMA_BIT_MASK(32), \
281 .data = &vin_platform_data, \
282 .size_data = sizeof(vin_platform_data), \
284 MARZEN_VIN(1);
285 MARZEN_VIN(3);
287 #define MARZEN_CAMERA(idx) \
288 static struct i2c_board_info camera##idx##_info = { \
289 I2C_BOARD_INFO("adv7180", 0x20 + (idx)), \
290 }; \
292 static struct soc_camera_link iclink##idx##_adv7180 = { \
293 .bus_id = 1 + 2 * (idx), \
294 .i2c_adapter_id = 0, \
295 .board_info = &camera##idx##_info, \
296 }; \
298 static struct platform_device camera##idx##_device = { \
299 .name = "soc-camera-pdrv", \
300 .id = idx, \
301 .dev = { \
302 .platform_data = &iclink##idx##_adv7180, \
303 }, \
306 MARZEN_CAMERA(0);
307 MARZEN_CAMERA(1);
309 static struct platform_device *marzen_devices[] __initdata = {
310 &eth_device,
311 &sdhi0_device,
312 &thermal_device,
313 &hspi_device,
314 &leds_device,
315 &usb_phy,
316 &camera0_device,
317 &camera1_device,
320 static const struct pinctrl_map marzen_pinctrl_map[] = {
321 /* DU (CN10: ARGB0, CN13: LVDS) */
322 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
323 "du0_rgb888", "du0"),
324 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
325 "du0_sync_1", "du0"),
326 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
327 "du0_clk_out_0", "du0"),
328 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
329 "du1_rgb666", "du1"),
330 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
331 "du1_sync_1", "du1"),
332 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
333 "du1_clk_out", "du1"),
334 /* HSPI0 */
335 PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
336 "hspi0", "hspi0"),
337 /* SCIF2 (CN18: DEBUG0) */
338 PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
339 "scif2_data_c", "scif2"),
340 /* SCIF4 (CN19: DEBUG1) */
341 PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
342 "scif4_data", "scif4"),
343 /* SDHI0 */
344 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
345 "sdhi0_data4", "sdhi0"),
346 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
347 "sdhi0_ctrl", "sdhi0"),
348 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
349 "sdhi0_cd", "sdhi0"),
350 /* SMSC */
351 PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
352 "intc_irq1_b", "intc"),
353 PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
354 "lbsc_ex_cs0", "lbsc"),
355 /* USB0 */
356 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
357 "usb0", "usb0"),
358 /* USB1 */
359 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
360 "usb1", "usb1"),
361 /* USB2 */
362 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
363 "usb2", "usb2"),
364 /* VIN1 */
365 PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
366 "vin1_clk", "vin1"),
367 PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
368 "vin1_data8", "vin1"),
369 /* VIN3 */
370 PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
371 "vin3_clk", "vin3"),
372 PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
373 "vin3_data8", "vin3"),
376 static void __init marzen_init(void)
378 regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
379 ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
380 regulator_register_fixed(1, dummy_supplies,
381 ARRAY_SIZE(dummy_supplies));
383 pinctrl_register_mappings(marzen_pinctrl_map,
384 ARRAY_SIZE(marzen_pinctrl_map));
385 r8a7779_pinmux_init();
386 r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
388 r8a7779_add_standard_devices();
389 platform_device_register_full(&vin1_info);
390 platform_device_register_full(&vin3_info);
391 platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
392 marzen_add_du_device();
395 static const char *marzen_boards_compat_dt[] __initdata = {
396 "renesas,marzen",
397 NULL,
400 DT_MACHINE_START(MARZEN, "marzen")
401 .smp = smp_ops(r8a7779_smp_ops),
402 .map_io = r8a7779_map_io,
403 .init_early = r8a7779_add_early_devices,
404 .init_irq = r8a7779_init_irq_dt,
405 .init_machine = marzen_init,
406 .init_late = r8a7779_init_late,
407 .dt_compat = marzen_boards_compat_dt,
408 .init_time = r8a7779_earlytimer_init,
409 MACHINE_END