arch/m68k/platform/coldfire/m53xx.c

   1 /***************************************************************************/
   2
   3 /*
   4  *      m53xx.c -- platform support for ColdFire 53xx based boards
   5  *
   6  *      Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
   7  *      Copyright (C) 2000, Lineo (www.lineo.com)
   8  *      Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
   9  *      Copyright Freescale Semiconductor, Inc 2006
  10  *      Copyright (c) 2006, emlix, Sebastian Hess <shess@hessware.de>
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or
  15  * (at your option) any later version.
  16  */
  17
  18 /***************************************************************************/
  19
  20 #include <linux/kernel.h>
  21 #include <linux/param.h>
  22 #include <linux/init.h>
  23 #include <linux/io.h>
  24 #include <asm/machdep.h>
  25 #include <asm/coldfire.h>
  26 #include <asm/mcfsim.h>
  27 #include <asm/mcfuart.h>
  28 #include <asm/mcfdma.h>
  29 #include <asm/mcfwdebug.h>
  30 #include <asm/mcfclk.h>
  31
  32 /***************************************************************************/
  33
  34 DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
  35 DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
  36 DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
  37 DEFINE_CLK(0, "edma", 17, MCF_CLK);
  38 DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
  39 DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
  40 DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
  41 DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
  42 DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
  43 DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
  44 DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
  45 DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
  46 DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
  47 DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
  48 DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
  49 DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
  50
  51 DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
  52 DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
  53 DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
  54 DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
  55 DEFINE_CLK(0, "mcfpwm.0", 36, MCF_CLK);
  56 DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
  57 DEFINE_CLK(0, "mcfwdt.0", 38, MCF_CLK);
  58 DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
  59 DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
  60 DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
  61 DEFINE_CLK(0, "mcflcd.0", 43, MCF_CLK);
  62 DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
  63 DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
  64 DEFINE_CLK(0, "sdram.0", 46, MCF_CLK);
  65 DEFINE_CLK(0, "ssi.0", 47, MCF_CLK);
  66 DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
  67
  68 DEFINE_CLK(1, "mdha.0", 32, MCF_CLK);
  69 DEFINE_CLK(1, "skha.0", 33, MCF_CLK);
  70 DEFINE_CLK(1, "rng.0", 34, MCF_CLK);
  71
  72 struct clk *mcf_clks[] = {
  73         &__clk_0_2,     /* flexbus */
  74         &__clk_0_8,     /* mcfcan.0 */
  75         &__clk_0_12,    /* fec.0 */
  76         &__clk_0_17,    /* edma */
  77         &__clk_0_18,    /* intc.0 */
  78         &__clk_0_19,    /* intc.1 */
  79         &__clk_0_21,    /* iack.0 */
  80         &__clk_0_22,    /* mcfi2c.0 */
  81         &__clk_0_23,    /* mcfqspi.0 */
  82         &__clk_0_24,    /* mcfuart.0 */
  83         &__clk_0_25,    /* mcfuart.1 */
  84         &__clk_0_26,    /* mcfuart.2 */
  85         &__clk_0_28,    /* mcftmr.0 */
  86         &__clk_0_29,    /* mcftmr.1 */
  87         &__clk_0_30,    /* mcftmr.2 */
  88         &__clk_0_31,    /* mcftmr.3 */
  89
  90         &__clk_0_32,    /* mcfpit.0 */
  91         &__clk_0_33,    /* mcfpit.1 */
  92         &__clk_0_34,    /* mcfpit.2 */
  93         &__clk_0_35,    /* mcfpit.3 */
  94         &__clk_0_36,    /* mcfpwm.0 */
  95         &__clk_0_37,    /* mcfeport.0 */
  96         &__clk_0_38,    /* mcfwdt.0 */
  97         &__clk_0_40,    /* sys.0 */
  98         &__clk_0_41,    /* gpio.0 */
  99         &__clk_0_42,    /* mcfrtc.0 */
 100         &__clk_0_43,    /* mcflcd.0 */
 101         &__clk_0_44,    /* mcfusb-otg.0 */
 102         &__clk_0_45,    /* mcfusb-host.0 */
 103         &__clk_0_46,    /* sdram.0 */
 104         &__clk_0_47,    /* ssi.0 */
 105         &__clk_0_48,    /* pll.0 */
 106
 107         &__clk_1_32,    /* mdha.0 */
 108         &__clk_1_33,    /* skha.0 */
 109         &__clk_1_34,    /* rng.0 */
 110         NULL,
 111 };
 112
 113 static struct clk * const enable_clks[] __initconst = {
 114         &__clk_0_2,     /* flexbus */
 115         &__clk_0_18,    /* intc.0 */
 116         &__clk_0_19,    /* intc.1 */
 117         &__clk_0_21,    /* iack.0 */
 118         &__clk_0_24,    /* mcfuart.0 */
 119         &__clk_0_25,    /* mcfuart.1 */
 120         &__clk_0_26,    /* mcfuart.2 */
 121         &__clk_0_28,    /* mcftmr.0 */
 122         &__clk_0_29,    /* mcftmr.1 */
 123         &__clk_0_32,    /* mcfpit.0 */
 124         &__clk_0_33,    /* mcfpit.1 */
 125         &__clk_0_37,    /* mcfeport.0 */
 126         &__clk_0_40,    /* sys.0 */
 127         &__clk_0_41,    /* gpio.0 */
 128         &__clk_0_46,    /* sdram.0 */
 129         &__clk_0_48,    /* pll.0 */
 130 };
 131
 132 static struct clk * const disable_clks[] __initconst = {
 133         &__clk_0_8,     /* mcfcan.0 */
 134         &__clk_0_12,    /* fec.0 */
 135         &__clk_0_17,    /* edma */
 136         &__clk_0_22,    /* mcfi2c.0 */
 137         &__clk_0_23,    /* mcfqspi.0 */
 138         &__clk_0_30,    /* mcftmr.2 */
 139         &__clk_0_31,    /* mcftmr.3 */
 140         &__clk_0_34,    /* mcfpit.2 */
 141         &__clk_0_35,    /* mcfpit.3 */
 142         &__clk_0_36,    /* mcfpwm.0 */
 143         &__clk_0_38,    /* mcfwdt.0 */
 144         &__clk_0_42,    /* mcfrtc.0 */
 145         &__clk_0_43,    /* mcflcd.0 */
 146         &__clk_0_44,    /* mcfusb-otg.0 */
 147         &__clk_0_45,    /* mcfusb-host.0 */
 148         &__clk_0_47,    /* ssi.0 */
 149         &__clk_1_32,    /* mdha.0 */
 150         &__clk_1_33,    /* skha.0 */
 151         &__clk_1_34,    /* rng.0 */
 152 };
 153
 154
 155 static void __init m53xx_clk_init(void)
 156 {
 157         unsigned i;
 158
 159         /* make sure these clocks are enabled */
 160         for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
 161                 __clk_init_enabled(enable_clks[i]);
 162         /* make sure these clocks are disabled */
 163         for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
 164                 __clk_init_disabled(disable_clks[i]);
 165 }
 166
 167 /***************************************************************************/
 168
 169 static void __init m53xx_qspi_init(void)
 170 {
 171 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 172         /* setup QSPS pins for QSPI with gpio CS control */
 173         writew(0x01f0, MCFGPIO_PAR_QSPI);
 174 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 175 }
 176
 177 /***************************************************************************/
 178
 179 static void __init m53xx_uarts_init(void)
 180 {
 181         /* UART GPIO initialization */
 182         writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART);
 183 }
 184
 185 /***************************************************************************/
 186
 187 static void __init m53xx_fec_init(void)
 188 {
 189         u8 v;
 190
 191         /* Set multi-function pins to ethernet mode for fec0 */
 192         v = readb(MCFGPIO_PAR_FECI2C);
 193         v |= MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
 194                 MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO;
 195         writeb(v, MCFGPIO_PAR_FECI2C);
 196
 197         v = readb(MCFGPIO_PAR_FEC);
 198         v = MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC;
 199         writeb(v, MCFGPIO_PAR_FEC);
 200 }
 201
 202 /***************************************************************************/
 203
 204 void __init config_BSP(char *commandp, int size)
 205 {
 206 #if !defined(CONFIG_BOOTPARAM)
 207         /* Copy command line from FLASH to local buffer... */
 208         memcpy(commandp, (char *) 0x4000, 4);
 209         if(strncmp(commandp, "kcl ", 4) == 0){
 210                 memcpy(commandp, (char *) 0x4004, size);
 211                 commandp[size-1] = 0;
 212         } else {
 213                 memset(commandp, 0, size);
 214         }
 215 #endif
 216         mach_sched_init = hw_timer_init;
 217         m53xx_clk_init();
 218         m53xx_uarts_init();
 219         m53xx_fec_init();
 220         m53xx_qspi_init();
 221
 222 #ifdef CONFIG_BDM_DISABLE
 223         /*
 224          * Disable the BDM clocking.  This also turns off most of the rest of
 225          * the BDM device.  This is good for EMC reasons. This option is not
 226          * incompatible with the memory protection option.
 227          */
 228         wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
 229 #endif
 230 }
 231
 232 /***************************************************************************/
 233 /* Board initialization */
 234 /***************************************************************************/
 235 /*
 236  * PLL min/max specifications
 237  */
 238 #define MAX_FVCO        500000  /* KHz */
 239 #define MAX_FSYS        80000   /* KHz */
 240 #define MIN_FSYS        58333   /* KHz */
 241 #define FREF            16000   /* KHz */
 242
 243
 244 #define MAX_MFD         135     /* Multiplier */
 245 #define MIN_MFD         88      /* Multiplier */
 246 #define BUSDIV          6       /* Divider */
 247
 248 /*
 249  * Low Power Divider specifications
 250  */
 251 #define MIN_LPD         (1 << 0)    /* Divider (not encoded) */
 252 #define MAX_LPD         (1 << 15)   /* Divider (not encoded) */
 253 #define DEFAULT_LPD     (1 << 1)        /* Divider (not encoded) */
 254
 255 #define SYS_CLK_KHZ     80000
 256 #define SYSTEM_PERIOD   12.5
 257 /*
 258  *  SDRAM Timing Parameters
 259  */
 260 #define SDRAM_BL        8       /* # of beats in a burst */
 261 #define SDRAM_TWR       2       /* in clocks */
 262 #define SDRAM_CASL      2.5     /* CASL in clocks */
 263 #define SDRAM_TRCD      2       /* in clocks */
 264 #define SDRAM_TRP       2       /* in clocks */
 265 #define SDRAM_TRFC      7       /* in clocks */
 266 #define SDRAM_TREFI     7800    /* in ns */
 267
 268 #define EXT_SRAM_ADDRESS        (0xC0000000)
 269 #define FLASH_ADDRESS           (0x00000000)
 270 #define SDRAM_ADDRESS           (0x40000000)
 271
 272 #define NAND_FLASH_ADDRESS      (0xD0000000)
 273
 274 int sys_clk_khz = 0;
 275 int sys_clk_mhz = 0;
 276
 277 void wtm_init(void);
 278 void scm_init(void);
 279 void gpio_init(void);
 280 void fbcs_init(void);
 281 void sdramc_init(void);
 282 int  clock_pll (int fsys, int flags);
 283 int  clock_limp (int);
 284 int  clock_exit_limp (void);
 285 int  get_sys_clock (void);
 286
 287 asmlinkage void __init sysinit(void)
 288 {
 289         sys_clk_khz = clock_pll(0, 0);
 290         sys_clk_mhz = sys_clk_khz/1000;
 291
 292         wtm_init();
 293         scm_init();
 294         gpio_init();
 295         fbcs_init();
 296         sdramc_init();
 297 }
 298
 299 void wtm_init(void)
 300 {
 301         /* Disable watchdog timer */
 302         writew(0, MCF_WTM_WCR);
 303 }
 304
 305 #define MCF_SCM_BCR_GBW         (0x00000100)
 306 #define MCF_SCM_BCR_GBR         (0x00000200)
 307
 308 void scm_init(void)
 309 {
 310         /* All masters are trusted */
 311         writel(0x77777777, MCF_SCM_MPR);
 312
 313         /* Allow supervisor/user, read/write, and trusted/untrusted
 314            access to all slaves */
 315         writel(0, MCF_SCM_PACRA);
 316         writel(0, MCF_SCM_PACRB);
 317         writel(0, MCF_SCM_PACRC);
 318         writel(0, MCF_SCM_PACRD);
 319         writel(0, MCF_SCM_PACRE);
 320         writel(0, MCF_SCM_PACRF);
 321
 322         /* Enable bursts */
 323         writel(MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW, MCF_SCM_BCR);
 324 }
 325
 326
 327 void fbcs_init(void)
 328 {
 329         writeb(0x3E, MCFGPIO_PAR_CS);
 330
 331         /* Latch chip select */
 332         writel(0x10080000, MCF_FBCS1_CSAR);
 333
 334         writel(0x002A3780, MCF_FBCS1_CSCR);
 335         writel(MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
 336
 337         /* Initialize latch to drive signals to inactive states */
 338         writew(0xffff, 0x10080000);
 339
 340         /* External SRAM */
 341         writel(EXT_SRAM_ADDRESS, MCF_FBCS1_CSAR);
 342         writel(MCF_FBCS_CSCR_PS_16 |
 343                 MCF_FBCS_CSCR_AA |
 344                 MCF_FBCS_CSCR_SBM |
 345                 MCF_FBCS_CSCR_WS(1),
 346                 MCF_FBCS1_CSCR);
 347         writel(MCF_FBCS_CSMR_BAM_512K | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
 348
 349         /* Boot Flash connected to FBCS0 */
 350         writel(FLASH_ADDRESS, MCF_FBCS0_CSAR);
 351         writel(MCF_FBCS_CSCR_PS_16 |
 352                 MCF_FBCS_CSCR_BEM |
 353                 MCF_FBCS_CSCR_AA |
 354                 MCF_FBCS_CSCR_SBM |
 355                 MCF_FBCS_CSCR_WS(7),
 356                 MCF_FBCS0_CSCR);
 357         writel(MCF_FBCS_CSMR_BAM_32M | MCF_FBCS_CSMR_V, MCF_FBCS0_CSMR);
 358 }
 359
 360 void sdramc_init(void)
 361 {
 362         /*
 363          * Check to see if the SDRAM has already been initialized
 364          * by a run control tool
 365          */
 366         if (!(readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)) {
 367                 /* SDRAM chip select initialization */
 368
 369                 /* Initialize SDRAM chip select */
 370                 writel(MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS) |
 371                         MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE),
 372                         MCF_SDRAMC_SDCS0);
 373
 374         /*
 375          * Basic configuration and initialization
 376          */
 377         writel(MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5)) |
 378                 MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1) |
 379                 MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL * 2) + 2)) |
 380                 MCF_SDRAMC_SDCFG1_ACT2RW((int)(SDRAM_TRCD + 0.5)) |
 381                 MCF_SDRAMC_SDCFG1_PRE2ACT((int)(SDRAM_TRP + 0.5)) |
 382                 MCF_SDRAMC_SDCFG1_REF2ACT((int)(SDRAM_TRFC + 0.5)) |
 383                 MCF_SDRAMC_SDCFG1_WTLAT(3),
 384                 MCF_SDRAMC_SDCFG1);
 385         writel(MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL / 2 + 1) |
 386                 MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL / 2 + SDRAM_TWR) |
 387                 MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL + SDRAM_BL / 2 - 1.0) + 0.5)) |
 388                 MCF_SDRAMC_SDCFG2_BL(SDRAM_BL - 1),
 389                 MCF_SDRAMC_SDCFG2);
 390
 391
 392         /*
 393          * Precharge and enable write to SDMR
 394          */
 395         writel(MCF_SDRAMC_SDCR_MODE_EN |
 396                 MCF_SDRAMC_SDCR_CKE |
 397                 MCF_SDRAMC_SDCR_DDR |
 398                 MCF_SDRAMC_SDCR_MUX(1) |
 399                 MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI / (SYSTEM_PERIOD * 64)) - 1) + 0.5)) |
 400                 MCF_SDRAMC_SDCR_PS_16 |
 401                 MCF_SDRAMC_SDCR_IPALL,
 402                 MCF_SDRAMC_SDCR);
 403
 404         /*
 405          * Write extended mode register
 406          */
 407         writel(MCF_SDRAMC_SDMR_BNKAD_LEMR |
 408                 MCF_SDRAMC_SDMR_AD(0x0) |
 409                 MCF_SDRAMC_SDMR_CMD,
 410                 MCF_SDRAMC_SDMR);
 411
 412         /*
 413          * Write mode register and reset DLL
 414          */
 415         writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
 416                 MCF_SDRAMC_SDMR_AD(0x163) |
 417                 MCF_SDRAMC_SDMR_CMD,
 418                 MCF_SDRAMC_SDMR);
 419
 420         /*
 421          * Execute a PALL command
 422          */
 423         writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IPALL, MCF_SDRAMC_SDCR);
 424
 425         /*
 426          * Perform two REF cycles
 427          */
 428         writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
 429         writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
 430
 431         /*
 432          * Write mode register and clear reset DLL
 433          */
 434         writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
 435                 MCF_SDRAMC_SDMR_AD(0x063) |
 436                 MCF_SDRAMC_SDMR_CMD,
 437                 MCF_SDRAMC_SDMR);
 438
 439         /*
 440          * Enable auto refresh and lock SDMR
 441          */
 442         writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_MODE_EN,
 443                 MCF_SDRAMC_SDCR);
 444         writel(MCF_SDRAMC_SDCR_REF | MCF_SDRAMC_SDCR_DQS_OE(0xC),
 445                 MCF_SDRAMC_SDCR);
 446         }
 447 }
 448
 449 void gpio_init(void)
 450 {
 451         /* Enable UART0 pins */
 452         writew(MCF_GPIO_PAR_UART_PAR_URXD0 | MCF_GPIO_PAR_UART_PAR_UTXD0,
 453                 MCFGPIO_PAR_UART);
 454
 455         /*
 456          * Initialize TIN3 as a GPIO output to enable the write
 457          * half of the latch.
 458          */
 459         writeb(0x00, MCFGPIO_PAR_TIMER);
 460         writeb(0x08, MCFGPIO_PDDR_TIMER);
 461         writeb(0x00, MCFGPIO_PCLRR_TIMER);
 462 }
 463
 464 int clock_pll(int fsys, int flags)
 465 {
 466         int fref, temp, fout, mfd;
 467         u32 i;
 468
 469         fref = FREF;
 470
 471         if (fsys == 0) {
 472                 /* Return current PLL output */
 473                 mfd = readb(MCF_PLL_PFDR);
 474
 475                 return (fref * mfd / (BUSDIV * 4));
 476         }
 477
 478         /* Check bounds of requested system clock */
 479         if (fsys > MAX_FSYS)
 480                 fsys = MAX_FSYS;
 481         if (fsys < MIN_FSYS)
 482                 fsys = MIN_FSYS;
 483
 484         /* Multiplying by 100 when calculating the temp value,
 485            and then dividing by 100 to calculate the mfd allows
 486            for exact values without needing to include floating
 487            point libraries. */
 488         temp = 100 * fsys / fref;
 489         mfd = 4 * BUSDIV * temp / 100;
 490
 491         /* Determine the output frequency for selected values */
 492         fout = (fref * mfd / (BUSDIV * 4));
 493
 494         /*
 495          * Check to see if the SDRAM has already been initialized.
 496          * If it has then the SDRAM needs to be put into self refresh
 497          * mode before reprogramming the PLL.
 498          */
 499         if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
 500                 /* Put SDRAM into self refresh mode */
 501                 writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_CKE,
 502                         MCF_SDRAMC_SDCR);
 503
 504         /*
 505          * Initialize the PLL to generate the new system clock frequency.
 506          * The device must be put into LIMP mode to reprogram the PLL.
 507          */
 508
 509         /* Enter LIMP mode */
 510         clock_limp(DEFAULT_LPD);
 511
 512         /* Reprogram PLL for desired fsys */
 513         writeb(MCF_PLL_PODR_CPUDIV(BUSDIV/3) | MCF_PLL_PODR_BUSDIV(BUSDIV),
 514                 MCF_PLL_PODR);
 515
 516         writeb(mfd, MCF_PLL_PFDR);
 517
 518         /* Exit LIMP mode */
 519         clock_exit_limp();
 520
 521         /*
 522          * Return the SDRAM to normal operation if it is in use.
 523          */
 524         if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
 525                 /* Exit self refresh mode */
 526                 writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_CKE,
 527                         MCF_SDRAMC_SDCR);
 528
 529         /* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
 530         writel(MCF_SDRAMC_REFRESH, MCF_SDRAMC_LIMP_FIX);
 531
 532         /* wait for DQS logic to relock */
 533         for (i = 0; i < 0x200; i++)
 534                 ;
 535
 536         return fout;
 537 }
 538
 539 int clock_limp(int div)
 540 {
 541         u32 temp;
 542
 543         /* Check bounds of divider */
 544         if (div < MIN_LPD)
 545                 div = MIN_LPD;
 546         if (div > MAX_LPD)
 547                 div = MAX_LPD;
 548
 549         /* Save of the current value of the SSIDIV so we don't
 550            overwrite the value*/
 551         temp = readw(MCF_CCM_CDR) & MCF_CCM_CDR_SSIDIV(0xF);
 552
 553         /* Apply the divider to the system clock */
 554         writew(MCF_CCM_CDR_LPDIV(div) | MCF_CCM_CDR_SSIDIV(temp), MCF_CCM_CDR);
 555
 556         writew(readw(MCF_CCM_MISCCR) | MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
 557
 558         return (FREF/(3*(1 << div)));
 559 }
 560
 561 int clock_exit_limp(void)
 562 {
 563         int fout;
 564
 565         /* Exit LIMP mode */
 566         writew(readw(MCF_CCM_MISCCR) & ~MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
 567
 568         /* Wait for PLL to lock */
 569         while (!(readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_PLL_LOCK))
 570                 ;
 571
 572         fout = get_sys_clock();
 573
 574         return fout;
 575 }
 576
 577 int get_sys_clock(void)
 578 {
 579         int divider;
 580
 581         /* Test to see if device is in LIMP mode */
 582         if (readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_LIMP) {
 583                 divider = readw(MCF_CCM_CDR) & MCF_CCM_CDR_LPDIV(0xF);
 584                 return (FREF/(2 << divider));
 585         }
 586         else
 587                 return (FREF * readb(MCF_PLL_PFDR)) / (BUSDIV * 4);
 588 }