arch/powerpc/oprofile/op_model_power4.c

   1 /*
   2  * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
   3  * Added mmcra[slot] support:
   4  * Copyright (C) 2006-2007 Will Schmidt <willschm@us.ibm.com>, IBM
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11
  12 #include <linux/oprofile.h>
  13 #include <linux/smp.h>
  14 #include <asm/firmware.h>
  15 #include <asm/ptrace.h>
  16 #include <asm/processor.h>
  17 #include <asm/cputable.h>
  18 #include <asm/rtas.h>
  19 #include <asm/oprofile_impl.h>
  20 #include <asm/reg.h>
  21
  22 #define dbg(args...)
  23 #define OPROFILE_PM_PMCSEL_MSK      0xffULL
  24 #define OPROFILE_PM_UNIT_SHIFT      60
  25 #define OPROFILE_PM_UNIT_MSK        0xfULL
  26 #define OPROFILE_MAX_PMC_NUM        3
  27 #define OPROFILE_PMSEL_FIELD_WIDTH  8
  28 #define OPROFILE_UNIT_FIELD_WIDTH   4
  29 #define MMCRA_SIAR_VALID_MASK       0x10000000ULL
  30
  31 static unsigned long reset_value[OP_MAX_COUNTER];
  32
  33 static int oprofile_running;
  34 static int use_slot_nums;
  35
  36 /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
  37 static u32 mmcr0_val;
  38 static u64 mmcr1_val;
  39 static u64 mmcra_val;
  40 static u32 cntr_marked_events;
  41
  42 static int power7_marked_instr_event(u64 mmcr1)
  43 {
  44         u64 psel, unit;
  45         int pmc, cntr_marked_events = 0;
  46
  47         /* Given the MMCR1 value, look at the field for each counter to
  48          * determine if it is a marked event.  Code based on the function
  49          * power7_marked_instr_event() in file arch/powerpc/perf/power7-pmu.c.
  50          */
  51         for (pmc = 0; pmc < 4; pmc++) {
  52                 psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
  53                                 << (OPROFILE_MAX_PMC_NUM - pmc)
  54                                 * OPROFILE_PMSEL_FIELD_WIDTH);
  55                 psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
  56                                  * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
  57                 unit = mmcr1 & (OPROFILE_PM_UNIT_MSK
  58                                 << (OPROFILE_PM_UNIT_SHIFT
  59                                     - (pmc * OPROFILE_PMSEL_FIELD_WIDTH )));
  60                 unit = unit >> (OPROFILE_PM_UNIT_SHIFT
  61                                 - (pmc * OPROFILE_PMSEL_FIELD_WIDTH));
  62
  63                 switch (psel >> 4) {
  64                 case 2:
  65                         cntr_marked_events |= (pmc == 1 || pmc == 3) << pmc;
  66                         break;
  67                 case 3:
  68                         if (psel == 0x3c) {
  69                                 cntr_marked_events |= (pmc == 0) << pmc;
  70                                 break;
  71                         }
  72
  73                         if (psel == 0x3e) {
  74                                 cntr_marked_events |= (pmc != 1) << pmc;
  75                                 break;
  76                         }
  77
  78                         cntr_marked_events |= 1 << pmc;
  79                         break;
  80                 case 4:
  81                 case 5:
  82                         cntr_marked_events |= (unit == 0xd) << pmc;
  83                         break;
  84                 case 6:
  85                         if (psel == 0x64)
  86                                 cntr_marked_events |= (pmc >= 2) << pmc;
  87                         break;
  88                 case 8:
  89                         cntr_marked_events |= (unit == 0xd) << pmc;
  90                         break;
  91                 }
  92         }
  93         return cntr_marked_events;
  94 }
  95
  96 static int power4_reg_setup(struct op_counter_config *ctr,
  97                              struct op_system_config *sys,
  98                              int num_ctrs)
  99 {
 100         int i;
 101
 102         /*
 103          * The performance counter event settings are given in the mmcr0,
 104          * mmcr1 and mmcra values passed from the user in the
 105          * op_system_config structure (sys variable).
 106          */
 107         mmcr0_val = sys->mmcr0;
 108         mmcr1_val = sys->mmcr1;
 109         mmcra_val = sys->mmcra;
 110
 111         /* Power 7+ and newer architectures:
 112          * Determine which counter events in the group (the group of events is
 113          * specified by the bit settings in the MMCR1 register) are marked
 114          * events for use in the interrupt handler.  Do the calculation once
 115          * before OProfile starts.  Information is used in the interrupt
 116          * handler.  Starting with Power 7+ we only record the sample for
 117          * marked events if the SIAR valid bit is set.  For non marked events
 118          * the sample is always recorded.
 119          */
 120         if (pvr_version_is(PVR_POWER7p))
 121                 cntr_marked_events = power7_marked_instr_event(mmcr1_val);
 122         else
 123                 cntr_marked_events = 0; /* For older processors, set the bit map
 124                                          * to zero so the sample will always be
 125                                          * be recorded.
 126                                          */
 127
 128         for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
 129                 reset_value[i] = 0x80000000UL - ctr[i].count;
 130
 131         /* setup user and kernel profiling */
 132         if (sys->enable_kernel)
 133                 mmcr0_val &= ~MMCR0_KERNEL_DISABLE;
 134         else
 135                 mmcr0_val |= MMCR0_KERNEL_DISABLE;
 136
 137         if (sys->enable_user)
 138                 mmcr0_val &= ~MMCR0_PROBLEM_DISABLE;
 139         else
 140                 mmcr0_val |= MMCR0_PROBLEM_DISABLE;
 141
 142         if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) ||
 143             pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) ||
 144             pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX) ||
 145             pvr_version_is(PVR_POWER5) || pvr_version_is(PVR_POWER5p))
 146                 use_slot_nums = 1;
 147
 148         return 0;
 149 }
 150
 151 extern void ppc_enable_pmcs(void);
 152
 153 /*
 154  * Older CPUs require the MMCRA sample bit to be always set, but newer
 155  * CPUs only want it set for some groups. Eventually we will remove all
 156  * knowledge of this bit in the kernel, oprofile userspace should be
 157  * setting it when required.
 158  *
 159  * In order to keep current installations working we force the bit for
 160  * those older CPUs. Once everyone has updated their oprofile userspace we
 161  * can remove this hack.
 162  */
 163 static inline int mmcra_must_set_sample(void)
 164 {
 165         if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) ||
 166             pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) ||
 167             pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX))
 168                 return 1;
 169
 170         return 0;
 171 }
 172
 173 static int power4_cpu_setup(struct op_counter_config *ctr)
 174 {
 175         unsigned int mmcr0 = mmcr0_val;
 176         unsigned long mmcra = mmcra_val;
 177
 178         ppc_enable_pmcs();
 179
 180         /* set the freeze bit */
 181         mmcr0 |= MMCR0_FC;
 182         mtspr(SPRN_MMCR0, mmcr0);
 183
 184         mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
 185         mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
 186         mtspr(SPRN_MMCR0, mmcr0);
 187
 188         mtspr(SPRN_MMCR1, mmcr1_val);
 189
 190         if (mmcra_must_set_sample())
 191                 mmcra |= MMCRA_SAMPLE_ENABLE;
 192         mtspr(SPRN_MMCRA, mmcra);
 193
 194         dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
 195             mfspr(SPRN_MMCR0));
 196         dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
 197             mfspr(SPRN_MMCR1));
 198         dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(),
 199             mfspr(SPRN_MMCRA));
 200
 201         return 0;
 202 }
 203
 204 static int power4_start(struct op_counter_config *ctr)
 205 {
 206         int i;
 207         unsigned int mmcr0;
 208
 209         /* set the PMM bit (see comment below) */
 210         mtmsrd(mfmsr() | MSR_PMM);
 211
 212         for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
 213                 if (ctr[i].enabled) {
 214                         classic_ctr_write(i, reset_value[i]);
 215                 } else {
 216                         classic_ctr_write(i, 0);
 217                 }
 218         }
 219
 220         mmcr0 = mfspr(SPRN_MMCR0);
 221
 222         /*
 223          * We must clear the PMAO bit on some (GQ) chips. Just do it
 224          * all the time
 225          */
 226         mmcr0 &= ~MMCR0_PMAO;
 227
 228         /*
 229          * now clear the freeze bit, counting will not start until we
 230          * rfid from this excetion, because only at that point will
 231          * the PMM bit be cleared
 232          */
 233         mmcr0 &= ~MMCR0_FC;
 234         mtspr(SPRN_MMCR0, mmcr0);
 235
 236         oprofile_running = 1;
 237
 238         dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
 239         return 0;
 240 }
 241
 242 static void power4_stop(void)
 243 {
 244         unsigned int mmcr0;
 245
 246         /* freeze counters */
 247         mmcr0 = mfspr(SPRN_MMCR0);
 248         mmcr0 |= MMCR0_FC;
 249         mtspr(SPRN_MMCR0, mmcr0);
 250
 251         oprofile_running = 0;
 252
 253         dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
 254
 255         mb();
 256 }
 257
 258 /* Fake functions used by canonicalize_pc */
 259 static void __used hypervisor_bucket(void)
 260 {
 261 }
 262
 263 static void __used rtas_bucket(void)
 264 {
 265 }
 266
 267 static void __used kernel_unknown_bucket(void)
 268 {
 269 }
 270
 271 /*
 272  * On GQ and newer the MMCRA stores the HV and PR bits at the time
 273  * the SIAR was sampled. We use that to work out if the SIAR was sampled in
 274  * the hypervisor, our exception vectors or RTAS.
 275  * If the MMCRA_SAMPLE_ENABLE bit is set, we can use the MMCRA[slot] bits
 276  * to more accurately identify the address of the sampled instruction. The
 277  * mmcra[slot] bits represent the slot number of a sampled instruction
 278  * within an instruction group.  The slot will contain a value between 1
 279  * and 5 if MMCRA_SAMPLE_ENABLE is set, otherwise 0.
 280  */
 281 static unsigned long get_pc(struct pt_regs *regs)
 282 {
 283         unsigned long pc = mfspr(SPRN_SIAR);
 284         unsigned long mmcra;
 285         unsigned long slot;
 286
 287         /* Can't do much about it */
 288         if (!cur_cpu_spec->oprofile_mmcra_sihv)
 289                 return pc;
 290
 291         mmcra = mfspr(SPRN_MMCRA);
 292
 293         if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
 294                 slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
 295                 if (slot > 1)
 296                         pc += 4 * (slot - 1);
 297         }
 298
 299         /* Were we in the hypervisor? */
 300         if (firmware_has_feature(FW_FEATURE_LPAR) &&
 301             (mmcra & cur_cpu_spec->oprofile_mmcra_sihv))
 302                 /* function descriptor madness */
 303                 return *((unsigned long *)hypervisor_bucket);
 304
 305         /* We were in userspace, nothing to do */
 306         if (mmcra & cur_cpu_spec->oprofile_mmcra_sipr)
 307                 return pc;
 308
 309 #ifdef CONFIG_PPC_RTAS
 310         /* Were we in RTAS? */
 311         if (pc >= rtas.base && pc < (rtas.base + rtas.size))
 312                 /* function descriptor madness */
 313                 return *((unsigned long *)rtas_bucket);
 314 #endif
 315
 316         /* Were we in our exception vectors or SLB real mode miss handler? */
 317         if (pc < 0x1000000UL)
 318                 return (unsigned long)__va(pc);
 319
 320         /* Not sure where we were */
 321         if (!is_kernel_addr(pc))
 322                 /* function descriptor madness */
 323                 return *((unsigned long *)kernel_unknown_bucket);
 324
 325         return pc;
 326 }
 327
 328 static int get_kernel(unsigned long pc, unsigned long mmcra)
 329 {
 330         int is_kernel;
 331
 332         if (!cur_cpu_spec->oprofile_mmcra_sihv) {
 333                 is_kernel = is_kernel_addr(pc);
 334         } else {
 335                 is_kernel = ((mmcra & cur_cpu_spec->oprofile_mmcra_sipr) == 0);
 336         }
 337
 338         return is_kernel;
 339 }
 340
 341 static bool pmc_overflow(unsigned long val)
 342 {
 343         if ((int)val < 0)
 344                 return true;
 345
 346         /*
 347          * Events on POWER7 can roll back if a speculative event doesn't
 348          * eventually complete. Unfortunately in some rare cases they will
 349          * raise a performance monitor exception. We need to catch this to
 350          * ensure we reset the PMC. In all cases the PMC will be 256 or less
 351          * cycles from overflow.
 352          *
 353          * We only do this if the first pass fails to find any overflowing
 354          * PMCs because a user might set a period of less than 256 and we
 355          * don't want to mistakenly reset them.
 356          */
 357         if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256))
 358                 return true;
 359
 360         return false;
 361 }
 362
 363 static void power4_handle_interrupt(struct pt_regs *regs,
 364                                     struct op_counter_config *ctr)
 365 {
 366         unsigned long pc;
 367         int is_kernel;
 368         int val;
 369         int i;
 370         unsigned int mmcr0;
 371         unsigned long mmcra;
 372         bool siar_valid = false;
 373
 374         mmcra = mfspr(SPRN_MMCRA);
 375
 376         pc = get_pc(regs);
 377         is_kernel = get_kernel(pc, mmcra);
 378
 379         /* set the PMM bit (see comment below) */
 380         mtmsrd(mfmsr() | MSR_PMM);
 381
 382         /* Check that the SIAR  valid bit in MMCRA is set to 1. */
 383         if ((mmcra & MMCRA_SIAR_VALID_MASK) == MMCRA_SIAR_VALID_MASK)
 384                 siar_valid = true;
 385
 386         for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
 387                 val = classic_ctr_read(i);
 388                 if (pmc_overflow(val)) {
 389                         if (oprofile_running && ctr[i].enabled) {
 390                                 /* Power 7+ and newer architectures:
 391                                  * If the event is a marked event, then only
 392                                  * save the sample if the SIAR valid bit is
 393                                  * set.  If the event is not marked, then
 394                                  * always save the sample.
 395                                  * Note, the Sample enable bit in the MMCRA
 396                                  * register must be set to 1 if the group
 397                                  * contains a marked event.
 398                                  */
 399                                 if ((siar_valid &&
 400                                      (cntr_marked_events & (1 << i)))
 401                                     || !(cntr_marked_events & (1 << i)))
 402                                         oprofile_add_ext_sample(pc, regs, i,
 403                                                                 is_kernel);
 404
 405                                 classic_ctr_write(i, reset_value[i]);
 406                         } else {
 407                                 classic_ctr_write(i, 0);
 408                         }
 409                 }
 410         }
 411
 412         mmcr0 = mfspr(SPRN_MMCR0);
 413
 414         /* reset the perfmon trigger */
 415         mmcr0 |= MMCR0_PMXE;
 416
 417         /*
 418          * We must clear the PMAO bit on some (GQ) chips. Just do it
 419          * all the time
 420          */
 421         mmcr0 &= ~MMCR0_PMAO;
 422
 423         /* Clear the appropriate bits in the MMCRA */
 424         mmcra &= ~cur_cpu_spec->oprofile_mmcra_clear;
 425         mtspr(SPRN_MMCRA, mmcra);
 426
 427         /*
 428          * now clear the freeze bit, counting will not start until we
 429          * rfid from this exception, because only at that point will
 430          * the PMM bit be cleared
 431          */
 432         mmcr0 &= ~MMCR0_FC;
 433         mtspr(SPRN_MMCR0, mmcr0);
 434 }
 435
 436 struct op_powerpc_model op_model_power4 = {
 437         .reg_setup              = power4_reg_setup,
 438         .cpu_setup              = power4_cpu_setup,
 439         .start                  = power4_start,
 440         .stop                   = power4_stop,
 441         .handle_interrupt       = power4_handle_interrupt,
 442 };