2 * linux/arch/unicore32/kernel/puv3-core.c
4 * Code specific to PKUnity SoC and UniCore ISA
6 * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
7 * Copyright (C) 2001-2010 Guan Xuetao
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/init.h>
15 #include <linux/device.h>
16 #include <linux/amba/bus.h>
17 #include <linux/platform_device.h>
19 #include <linux/cnt32_to_63.h>
20 #include <linux/usb/musb.h>
23 #include <mach/hardware.h>
27 * This is the PKUnity sched_clock implementation. This has
28 * a resolution of 271ns, and a maximum value of 32025597s (370 days).
30 * The return value is guaranteed to be monotonic in that range as
31 * long as there is always less than 582 seconds between successive
32 * calls to this function.
34 * ( * 1E9 / CLOCK_TICK_RATE ) -> about 2235/32
36 unsigned long long sched_clock(void)
38 unsigned long long v
= cnt32_to_63(readl(OST_OSCR
));
40 /* original conservative method, but overflow frequently
41 * v *= NSEC_PER_SEC >> 12;
42 * do_div(v, CLOCK_TICK_RATE >> 12);
44 v
= ((v
& 0x7fffffffffffffffULL
) * 2235) >> 5;
49 static struct resource puv3_usb_resources
[] = {
50 /* order is significant! */
52 .start
= io_v2p(PKUNITY_USB_BASE
),
53 .end
= io_v2p(PKUNITY_USB_BASE
) + 0x3ff,
54 .flags
= IORESOURCE_MEM
,
57 .flags
= IORESOURCE_IRQ
,
60 .flags
= IORESOURCE_IRQ
,
64 static struct musb_hdrc_config puv3_usb_config
[] = {
68 #ifdef CONFIG_USB_INVENTRA_DMA
75 static struct musb_hdrc_platform_data puv3_usb_plat
= {
79 .config
= puv3_usb_config
,
82 static struct resource puv3_mmc_resources
[] = {
84 .start
= io_v2p(PKUNITY_SDC_BASE
),
85 .end
= io_v2p(PKUNITY_SDC_BASE
) + 0xfff,
86 .flags
= IORESOURCE_MEM
,
91 .flags
= IORESOURCE_IRQ
,
95 static struct resource puv3_unigfx_resources
[] = {
97 .start
= io_v2p(PKUNITY_UNIGFX_BASE
),
98 .end
= io_v2p(PKUNITY_UNIGFX_BASE
) + 0xfff,
99 .flags
= IORESOURCE_MEM
,
103 static struct resource puv3_rtc_resources
[] = {
105 .start
= io_v2p(PKUNITY_RTC_BASE
),
106 .end
= io_v2p(PKUNITY_RTC_BASE
) + 0xff,
107 .flags
= IORESOURCE_MEM
,
110 .start
= IRQ_RTCAlarm
,
112 .flags
= IORESOURCE_IRQ
,
117 .flags
= IORESOURCE_IRQ
121 static struct resource puv3_pwm_resources
[] = {
123 .start
= io_v2p(PKUNITY_OST_BASE
) + 0x80,
124 .end
= io_v2p(PKUNITY_OST_BASE
) + 0xff,
125 .flags
= IORESOURCE_MEM
,
129 static struct resource puv3_uart0_resources
[] = {
131 .start
= io_v2p(PKUNITY_UART0_BASE
),
132 .end
= io_v2p(PKUNITY_UART0_BASE
) + 0xff,
133 .flags
= IORESOURCE_MEM
,
138 .flags
= IORESOURCE_IRQ
142 static struct resource puv3_uart1_resources
[] = {
144 .start
= io_v2p(PKUNITY_UART1_BASE
),
145 .end
= io_v2p(PKUNITY_UART1_BASE
) + 0xff,
146 .flags
= IORESOURCE_MEM
,
151 .flags
= IORESOURCE_IRQ
155 static struct resource puv3_umal_resources
[] = {
157 .start
= io_v2p(PKUNITY_UMAL_BASE
),
158 .end
= io_v2p(PKUNITY_UMAL_BASE
) + 0x1fff,
159 .flags
= IORESOURCE_MEM
,
164 .flags
= IORESOURCE_IRQ
168 #ifdef CONFIG_PUV3_PM
170 #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
171 #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
174 * List of global PXA peripheral registers to preserve.
175 * More ones like CP and general purpose register values are preserved
176 * with the stack pointer in sleep.S.
179 SLEEP_SAVE_PM_PLLDDRCFG
,
184 static void puv3_cpu_pm_save(unsigned long *sleep_save
)
186 /* SAVE(PM_PLLDDRCFG); */
189 static void puv3_cpu_pm_restore(unsigned long *sleep_save
)
191 /* RESTORE(PM_PLLDDRCFG); */
194 static int puv3_cpu_pm_prepare(void)
196 /* set resume return address */
197 writel(virt_to_phys(puv3_cpu_resume
), PM_DIVCFG
);
201 static void puv3_cpu_pm_enter(suspend_state_t state
)
203 /* Clear reset status */
204 writel(RESETC_RSSR_HWR
| RESETC_RSSR_WDR
205 | RESETC_RSSR_SMR
| RESETC_RSSR_SWR
, RESETC_RSSR
);
208 /* case PM_SUSPEND_ON:
212 puv3_cpu_pm_prepare();
213 puv3_cpu_suspend(PM_PMCR_SFB
);
218 static int puv3_cpu_pm_valid(suspend_state_t state
)
220 return state
== PM_SUSPEND_MEM
;
223 static void puv3_cpu_pm_finish(void)
225 /* ensure not to come back here if it wasn't intended */
229 static struct puv3_cpu_pm_fns puv3_cpu_pm_fnss
= {
230 .save_count
= SLEEP_SAVE_COUNT
,
231 .valid
= puv3_cpu_pm_valid
,
232 .save
= puv3_cpu_pm_save
,
233 .restore
= puv3_cpu_pm_restore
,
234 .enter
= puv3_cpu_pm_enter
,
235 .prepare
= puv3_cpu_pm_prepare
,
236 .finish
= puv3_cpu_pm_finish
,
239 static void __init
puv3_init_pm(void)
241 puv3_cpu_pm_fns
= &puv3_cpu_pm_fnss
;
244 static inline void puv3_init_pm(void) {}
247 void puv3_ps2_init(void)
251 bclk32
= clk_get(NULL
, "BUS32_CLK");
252 writel(clk_get_rate(bclk32
) / 200000, PS2_CNT
); /* should > 5us */
255 void __init
puv3_core_init(void)
260 platform_device_register_simple("PKUnity-v3-RTC", -1,
261 puv3_rtc_resources
, ARRAY_SIZE(puv3_rtc_resources
));
262 platform_device_register_simple("PKUnity-v3-UMAL", -1,
263 puv3_umal_resources
, ARRAY_SIZE(puv3_umal_resources
));
264 platform_device_register_simple("PKUnity-v3-MMC", -1,
265 puv3_mmc_resources
, ARRAY_SIZE(puv3_mmc_resources
));
266 platform_device_register_simple("PKUnity-v3-UNIGFX", -1,
267 puv3_unigfx_resources
, ARRAY_SIZE(puv3_unigfx_resources
));
268 platform_device_register_simple("PKUnity-v3-PWM", -1,
269 puv3_pwm_resources
, ARRAY_SIZE(puv3_pwm_resources
));
270 platform_device_register_simple("PKUnity-v3-UART", 0,
271 puv3_uart0_resources
, ARRAY_SIZE(puv3_uart0_resources
));
272 platform_device_register_simple("PKUnity-v3-UART", 1,
273 puv3_uart1_resources
, ARRAY_SIZE(puv3_uart1_resources
));
274 platform_device_register_simple("PKUnity-v3-AC97", -1, NULL
, 0);
275 platform_device_register_resndata(&platform_bus
, "musb_hdrc", -1,
276 puv3_usb_resources
, ARRAY_SIZE(puv3_usb_resources
),
277 &puv3_usb_plat
, sizeof(puv3_usb_plat
));