net/mlx4_en: Move filters cleanup to a proper location
[linux/fpc-iii.git] / drivers / net / usb / cdc_ether.c
blob7cba2c3759df76fba3087d0acd654bd9d77896d7
1 /*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 // #define DEBUG // error path messages, extra info
21 // #define VERBOSE // more; success messages
23 #include <linux/module.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/workqueue.h>
28 #include <linux/mii.h>
29 #include <linux/usb.h>
30 #include <linux/usb/cdc.h>
31 #include <linux/usb/usbnet.h>
34 #if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
36 static int is_rndis(struct usb_interface_descriptor *desc)
38 return (desc->bInterfaceClass == USB_CLASS_COMM &&
39 desc->bInterfaceSubClass == 2 &&
40 desc->bInterfaceProtocol == 0xff);
43 static int is_activesync(struct usb_interface_descriptor *desc)
45 return (desc->bInterfaceClass == USB_CLASS_MISC &&
46 desc->bInterfaceSubClass == 1 &&
47 desc->bInterfaceProtocol == 1);
50 static int is_wireless_rndis(struct usb_interface_descriptor *desc)
52 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
53 desc->bInterfaceSubClass == 1 &&
54 desc->bInterfaceProtocol == 3);
57 #else
59 #define is_rndis(desc) 0
60 #define is_activesync(desc) 0
61 #define is_wireless_rndis(desc) 0
63 #endif
65 static const u8 mbm_guid[16] = {
66 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
70 static void usbnet_cdc_update_filter(struct usbnet *dev)
72 struct cdc_state *info = (void *) &dev->data;
73 struct usb_interface *intf = info->control;
74 struct net_device *net = dev->net;
76 u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
77 | USB_CDC_PACKET_TYPE_BROADCAST;
79 /* filtering on the device is an optional feature and not worth
80 * the hassle so we just roughly care about snooping and if any
81 * multicast is requested, we take every multicast
83 if (net->flags & IFF_PROMISC)
84 cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
85 if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
86 cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
88 usb_control_msg(dev->udev,
89 usb_sndctrlpipe(dev->udev, 0),
90 USB_CDC_SET_ETHERNET_PACKET_FILTER,
91 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
92 cdc_filter,
93 intf->cur_altsetting->desc.bInterfaceNumber,
94 NULL,
96 USB_CTRL_SET_TIMEOUT
100 /* probes control interface, claims data interface, collects the bulk
101 * endpoints, activates data interface (if needed), maybe sets MTU.
102 * all pure cdc, except for certain firmware workarounds, and knowing
103 * that rndis uses one different rule.
105 int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
107 u8 *buf = intf->cur_altsetting->extra;
108 int len = intf->cur_altsetting->extralen;
109 struct usb_interface_descriptor *d;
110 struct cdc_state *info = (void *) &dev->data;
111 int status;
112 int rndis;
113 bool android_rndis_quirk = false;
114 struct usb_driver *driver = driver_of(intf);
115 struct usb_cdc_parsed_header header;
117 if (sizeof(dev->data) < sizeof(*info))
118 return -EDOM;
120 /* expect strict spec conformance for the descriptors, but
121 * cope with firmware which stores them in the wrong place
123 if (len == 0 && dev->udev->actconfig->extralen) {
124 /* Motorola SB4100 (and others: Brad Hards says it's
125 * from a Broadcom design) put CDC descriptors here
127 buf = dev->udev->actconfig->extra;
128 len = dev->udev->actconfig->extralen;
129 dev_dbg(&intf->dev, "CDC descriptors on config\n");
132 /* Maybe CDC descriptors are after the endpoint? This bug has
133 * been seen on some 2Wire Inc RNDIS-ish products.
135 if (len == 0) {
136 struct usb_host_endpoint *hep;
138 hep = intf->cur_altsetting->endpoint;
139 if (hep) {
140 buf = hep->extra;
141 len = hep->extralen;
143 if (len)
144 dev_dbg(&intf->dev,
145 "CDC descriptors on endpoint\n");
148 /* this assumes that if there's a non-RNDIS vendor variant
149 * of cdc-acm, it'll fail RNDIS requests cleanly.
151 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
152 is_activesync(&intf->cur_altsetting->desc) ||
153 is_wireless_rndis(&intf->cur_altsetting->desc));
155 memset(info, 0, sizeof(*info));
156 info->control = intf;
158 cdc_parse_cdc_header(&header, intf, buf, len);
160 info->u = header.usb_cdc_union_desc;
161 info->header = header.usb_cdc_header_desc;
162 info->ether = header.usb_cdc_ether_desc;
163 if (!info->u) {
164 if (rndis)
165 goto skip;
166 else /* in that case a quirk is mandatory */
167 goto bad_desc;
169 /* we need a master/control interface (what we're
170 * probed with) and a slave/data interface; union
171 * descriptors sort this all out.
173 info->control = usb_ifnum_to_if(dev->udev,
174 info->u->bMasterInterface0);
175 info->data = usb_ifnum_to_if(dev->udev,
176 info->u->bSlaveInterface0);
177 if (!info->control || !info->data) {
178 dev_dbg(&intf->dev,
179 "master #%u/%p slave #%u/%p\n",
180 info->u->bMasterInterface0,
181 info->control,
182 info->u->bSlaveInterface0,
183 info->data);
184 /* fall back to hard-wiring for RNDIS */
185 if (rndis) {
186 android_rndis_quirk = true;
187 goto skip;
189 goto bad_desc;
191 if (info->control != intf) {
192 dev_dbg(&intf->dev, "bogus CDC Union\n");
193 /* Ambit USB Cable Modem (and maybe others)
194 * interchanges master and slave interface.
196 if (info->data == intf) {
197 info->data = info->control;
198 info->control = intf;
199 } else
200 goto bad_desc;
203 /* some devices merge these - skip class check */
204 if (info->control == info->data)
205 goto skip;
207 /* a data interface altsetting does the real i/o */
208 d = &info->data->cur_altsetting->desc;
209 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
210 dev_dbg(&intf->dev, "slave class %u\n",
211 d->bInterfaceClass);
212 goto bad_desc;
214 skip:
215 if ( rndis &&
216 header.usb_cdc_acm_descriptor &&
217 header.usb_cdc_acm_descriptor->bmCapabilities) {
218 dev_dbg(&intf->dev,
219 "ACM capabilities %02x, not really RNDIS?\n",
220 header.usb_cdc_acm_descriptor->bmCapabilities);
221 goto bad_desc;
224 if (header.usb_cdc_ether_desc) {
225 dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
226 /* because of Zaurus, we may be ignoring the host
227 * side link address we were given.
231 if (header.usb_cdc_mdlm_desc &&
232 memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
233 dev_dbg(&intf->dev, "GUID doesn't match\n");
234 goto bad_desc;
237 if (header.usb_cdc_mdlm_detail_desc &&
238 header.usb_cdc_mdlm_detail_desc->bLength <
239 (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
240 dev_dbg(&intf->dev, "Descriptor too short\n");
241 goto bad_desc;
246 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
247 * CDC descriptors, so we'll hard-wire the interfaces and not check
248 * for descriptors.
250 * Some Android RNDIS devices have a CDC Union descriptor pointing
251 * to non-existing interfaces. Ignore that and attempt the same
252 * hard-wired 0 and 1 interfaces.
254 if (rndis && (!info->u || android_rndis_quirk)) {
255 info->control = usb_ifnum_to_if(dev->udev, 0);
256 info->data = usb_ifnum_to_if(dev->udev, 1);
257 if (!info->control || !info->data || info->control != intf) {
258 dev_dbg(&intf->dev,
259 "rndis: master #0/%p slave #1/%p\n",
260 info->control,
261 info->data);
262 goto bad_desc;
265 } else if (!info->header || (!rndis && !info->ether)) {
266 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
267 info->header ? "" : "header ",
268 info->u ? "" : "union ",
269 info->ether ? "" : "ether ");
270 goto bad_desc;
273 /* claim data interface and set it up ... with side effects.
274 * network traffic can't flow until an altsetting is enabled.
276 if (info->data != info->control) {
277 status = usb_driver_claim_interface(driver, info->data, dev);
278 if (status < 0)
279 return status;
281 status = usbnet_get_endpoints(dev, info->data);
282 if (status < 0) {
283 /* ensure immediate exit from usbnet_disconnect */
284 usb_set_intfdata(info->data, NULL);
285 if (info->data != info->control)
286 usb_driver_release_interface(driver, info->data);
287 return status;
290 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
291 if (info->data != info->control)
292 dev->status = NULL;
293 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
294 struct usb_endpoint_descriptor *desc;
296 dev->status = &info->control->cur_altsetting->endpoint [0];
297 desc = &dev->status->desc;
298 if (!usb_endpoint_is_int_in(desc) ||
299 (le16_to_cpu(desc->wMaxPacketSize)
300 < sizeof(struct usb_cdc_notification)) ||
301 !desc->bInterval) {
302 dev_dbg(&intf->dev, "bad notification endpoint\n");
303 dev->status = NULL;
306 if (rndis && !dev->status) {
307 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
308 usb_set_intfdata(info->data, NULL);
309 usb_driver_release_interface(driver, info->data);
310 return -ENODEV;
313 /* Some devices don't initialise properly. In particular
314 * the packet filter is not reset. There are devices that
315 * don't do reset all the way. So the packet filter should
316 * be set to a sane initial value.
318 usbnet_cdc_update_filter(dev);
320 return 0;
322 bad_desc:
323 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
324 return -ENODEV;
326 EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
328 void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
330 struct cdc_state *info = (void *) &dev->data;
331 struct usb_driver *driver = driver_of(intf);
333 /* combined interface - nothing to do */
334 if (info->data == info->control)
335 return;
337 /* disconnect master --> disconnect slave */
338 if (intf == info->control && info->data) {
339 /* ensure immediate exit from usbnet_disconnect */
340 usb_set_intfdata(info->data, NULL);
341 usb_driver_release_interface(driver, info->data);
342 info->data = NULL;
345 /* and vice versa (just in case) */
346 else if (intf == info->data && info->control) {
347 /* ensure immediate exit from usbnet_disconnect */
348 usb_set_intfdata(info->control, NULL);
349 usb_driver_release_interface(driver, info->control);
350 info->control = NULL;
353 EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
355 /* Communications Device Class, Ethernet Control model
357 * Takes two interfaces. The DATA interface is inactive till an altsetting
358 * is selected. Configuration data includes class descriptors. There's
359 * an optional status endpoint on the control interface.
361 * This should interop with whatever the 2.4 "CDCEther.c" driver
362 * (by Brad Hards) talked with, with more functionality.
365 static void dumpspeed(struct usbnet *dev, __le32 *speeds)
367 netif_info(dev, timer, dev->net,
368 "link speeds: %u kbps up, %u kbps down\n",
369 __le32_to_cpu(speeds[0]) / 1000,
370 __le32_to_cpu(speeds[1]) / 1000);
373 void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
375 struct usb_cdc_notification *event;
377 if (urb->actual_length < sizeof(*event))
378 return;
380 /* SPEED_CHANGE can get split into two 8-byte packets */
381 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
382 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
383 return;
386 event = urb->transfer_buffer;
387 switch (event->bNotificationType) {
388 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
389 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
390 event->wValue ? "on" : "off");
391 usbnet_link_change(dev, !!event->wValue, 0);
392 break;
393 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
394 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
395 urb->actual_length);
396 if (urb->actual_length != (sizeof(*event) + 8))
397 set_bit(EVENT_STS_SPLIT, &dev->flags);
398 else
399 dumpspeed(dev, (__le32 *) &event[1]);
400 break;
401 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
402 * but there are no standard formats for the response data.
404 default:
405 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
406 event->bNotificationType);
407 break;
410 EXPORT_SYMBOL_GPL(usbnet_cdc_status);
412 int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
414 int status;
415 struct cdc_state *info = (void *) &dev->data;
417 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
418 < sizeof(struct cdc_state)));
420 status = usbnet_generic_cdc_bind(dev, intf);
421 if (status < 0)
422 return status;
424 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
425 if (status < 0) {
426 usb_set_intfdata(info->data, NULL);
427 usb_driver_release_interface(driver_of(intf), info->data);
428 return status;
431 return 0;
433 EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
435 static const struct driver_info cdc_info = {
436 .description = "CDC Ethernet Device",
437 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
438 .bind = usbnet_cdc_bind,
439 .unbind = usbnet_cdc_unbind,
440 .status = usbnet_cdc_status,
441 .set_rx_mode = usbnet_cdc_update_filter,
442 .manage_power = usbnet_manage_power,
445 static const struct driver_info wwan_info = {
446 .description = "Mobile Broadband Network Device",
447 .flags = FLAG_WWAN,
448 .bind = usbnet_cdc_bind,
449 .unbind = usbnet_cdc_unbind,
450 .status = usbnet_cdc_status,
451 .set_rx_mode = usbnet_cdc_update_filter,
452 .manage_power = usbnet_manage_power,
455 /*-------------------------------------------------------------------------*/
457 #define HUAWEI_VENDOR_ID 0x12D1
458 #define NOVATEL_VENDOR_ID 0x1410
459 #define ZTE_VENDOR_ID 0x19D2
460 #define DELL_VENDOR_ID 0x413C
461 #define REALTEK_VENDOR_ID 0x0bda
462 #define SAMSUNG_VENDOR_ID 0x04e8
463 #define LENOVO_VENDOR_ID 0x17ef
464 #define NVIDIA_VENDOR_ID 0x0955
466 static const struct usb_device_id products[] = {
467 /* BLACKLIST !!
469 * First blacklist any products that are egregiously nonconformant
470 * with the CDC Ethernet specs. Minor braindamage we cope with; when
471 * they're not even trying, needing a separate driver is only the first
472 * of the differences to show up.
475 #define ZAURUS_MASTER_INTERFACE \
476 .bInterfaceClass = USB_CLASS_COMM, \
477 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
478 .bInterfaceProtocol = USB_CDC_PROTO_NONE
480 /* SA-1100 based Sharp Zaurus ("collie"), or compatible;
481 * wire-incompatible with true CDC Ethernet implementations.
482 * (And, it seems, needlessly so...)
485 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
486 | USB_DEVICE_ID_MATCH_DEVICE,
487 .idVendor = 0x04DD,
488 .idProduct = 0x8004,
489 ZAURUS_MASTER_INTERFACE,
490 .driver_info = 0,
493 /* PXA-25x based Sharp Zaurii. Note that it seems some of these
494 * (later models especially) may have shipped only with firmware
495 * advertising false "CDC MDLM" compatibility ... but we're not
496 * clear which models did that, so for now let's assume the worst.
499 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
500 | USB_DEVICE_ID_MATCH_DEVICE,
501 .idVendor = 0x04DD,
502 .idProduct = 0x8005, /* A-300 */
503 ZAURUS_MASTER_INTERFACE,
504 .driver_info = 0,
505 }, {
506 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
507 | USB_DEVICE_ID_MATCH_DEVICE,
508 .idVendor = 0x04DD,
509 .idProduct = 0x8006, /* B-500/SL-5600 */
510 ZAURUS_MASTER_INTERFACE,
511 .driver_info = 0,
512 }, {
513 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
514 | USB_DEVICE_ID_MATCH_DEVICE,
515 .idVendor = 0x04DD,
516 .idProduct = 0x8007, /* C-700 */
517 ZAURUS_MASTER_INTERFACE,
518 .driver_info = 0,
519 }, {
520 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
521 | USB_DEVICE_ID_MATCH_DEVICE,
522 .idVendor = 0x04DD,
523 .idProduct = 0x9031, /* C-750 C-760 */
524 ZAURUS_MASTER_INTERFACE,
525 .driver_info = 0,
526 }, {
527 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
528 | USB_DEVICE_ID_MATCH_DEVICE,
529 .idVendor = 0x04DD,
530 .idProduct = 0x9032, /* SL-6000 */
531 ZAURUS_MASTER_INTERFACE,
532 .driver_info = 0,
533 }, {
534 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
535 | USB_DEVICE_ID_MATCH_DEVICE,
536 .idVendor = 0x04DD,
537 /* reported with some C860 units */
538 .idProduct = 0x9050, /* C-860 */
539 ZAURUS_MASTER_INTERFACE,
540 .driver_info = 0,
543 /* Olympus has some models with a Zaurus-compatible option.
544 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
547 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
548 | USB_DEVICE_ID_MATCH_DEVICE,
549 .idVendor = 0x07B4,
550 .idProduct = 0x0F02, /* R-1000 */
551 ZAURUS_MASTER_INTERFACE,
552 .driver_info = 0,
555 /* LG Electronics VL600 wants additional headers on every frame */
557 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
558 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
559 .driver_info = 0,
562 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
564 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
565 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
566 .driver_info = 0,
569 /* Novatel USB551L and MC551 - handled by qmi_wwan */
571 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
572 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
573 .driver_info = 0,
576 /* Novatel E362 - handled by qmi_wwan */
578 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
579 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
580 .driver_info = 0,
583 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
585 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
586 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
587 .driver_info = 0,
590 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
592 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
593 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
594 .driver_info = 0,
597 /* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
599 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
600 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
601 .driver_info = 0,
604 /* Novatel Expedite E371 - handled by qmi_wwan */
606 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
607 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
608 .driver_info = 0,
611 /* AnyDATA ADU960S - handled by qmi_wwan */
613 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
614 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
615 .driver_info = 0,
618 /* Huawei E1820 - handled by qmi_wwan */
620 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
621 .driver_info = 0,
624 /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
626 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
627 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
628 .driver_info = 0,
631 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
633 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
634 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
635 .driver_info = 0,
638 /* Samsung USB Ethernet Adapters */
640 USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
641 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
642 .driver_info = 0,
645 /* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
647 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
648 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
649 .driver_info = 0,
652 /* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
654 USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
655 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
656 .driver_info = 0,
659 /* WHITELIST!!!
661 * CDC Ether uses two interfaces, not necessarily consecutive.
662 * We match the main interface, ignoring the optional device
663 * class so we could handle devices that aren't exclusively
664 * CDC ether.
666 * NOTE: this match must come AFTER entries blacklisting devices
667 * because of bugs/quirks in a given product (like Zaurus, above).
670 /* ZTE (Vodafone) K3805-Z */
671 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
672 USB_CDC_SUBCLASS_ETHERNET,
673 USB_CDC_PROTO_NONE),
674 .driver_info = (unsigned long)&wwan_info,
675 }, {
676 /* ZTE (Vodafone) K3806-Z */
677 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
678 USB_CDC_SUBCLASS_ETHERNET,
679 USB_CDC_PROTO_NONE),
680 .driver_info = (unsigned long)&wwan_info,
681 }, {
682 /* ZTE (Vodafone) K4510-Z */
683 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
684 USB_CDC_SUBCLASS_ETHERNET,
685 USB_CDC_PROTO_NONE),
686 .driver_info = (unsigned long)&wwan_info,
687 }, {
688 /* ZTE (Vodafone) K3770-Z */
689 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
690 USB_CDC_SUBCLASS_ETHERNET,
691 USB_CDC_PROTO_NONE),
692 .driver_info = (unsigned long)&wwan_info,
693 }, {
694 /* ZTE (Vodafone) K3772-Z */
695 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
696 USB_CDC_SUBCLASS_ETHERNET,
697 USB_CDC_PROTO_NONE),
698 .driver_info = (unsigned long)&wwan_info,
699 }, {
700 /* Telit modules */
701 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
702 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
703 .driver_info = (kernel_ulong_t) &wwan_info,
704 }, {
705 /* Dell DW5580 modules */
706 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
707 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
708 .driver_info = (kernel_ulong_t)&wwan_info,
709 }, {
710 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
711 USB_CDC_PROTO_NONE),
712 .driver_info = (unsigned long) &cdc_info,
713 }, {
714 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
715 USB_CDC_PROTO_NONE),
716 .driver_info = (unsigned long)&wwan_info,
718 }, {
719 /* Various Huawei modems with a network port like the UMG1831 */
720 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
721 USB_CDC_SUBCLASS_ETHERNET, 255),
722 .driver_info = (unsigned long)&wwan_info,
724 { }, /* END */
726 MODULE_DEVICE_TABLE(usb, products);
728 static struct usb_driver cdc_driver = {
729 .name = "cdc_ether",
730 .id_table = products,
731 .probe = usbnet_probe,
732 .disconnect = usbnet_disconnect,
733 .suspend = usbnet_suspend,
734 .resume = usbnet_resume,
735 .reset_resume = usbnet_resume,
736 .supports_autosuspend = 1,
737 .disable_hub_initiated_lpm = 1,
740 module_usb_driver(cdc_driver);
742 MODULE_AUTHOR("David Brownell");
743 MODULE_DESCRIPTION("USB CDC Ethernet devices");
744 MODULE_LICENSE("GPL");