drivers/net/wireless/rsi/rsi_91x_sdio_ops.c

   1 /**
   2  * Copyright (c) 2014 Redpine Signals Inc.
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  *
  16  */
  17
  18 #include <linux/firmware.h>
  19 #include "rsi_sdio.h"
  20 #include "rsi_common.h"
  21
  22 /**
  23  * rsi_sdio_master_access_msword() - This function sets the AHB master access
  24  *                                   MS word in the SDIO slave registers.
  25  * @adapter: Pointer to the adapter structure.
  26  * @ms_word: ms word need to be initialized.
  27  *
  28  * Return: status: 0 on success, -1 on failure.
  29  */
  30 static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
  31                                          u16 ms_word)
  32 {
  33         u8 byte;
  34         u8 function = 0;
  35         int status = 0;
  36
  37         byte = (u8)(ms_word & 0x00FF);
  38
  39         rsi_dbg(INIT_ZONE,
  40                 "%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte);
  41
  42         status = rsi_sdio_write_register(adapter,
  43                                          function,
  44                                          SDIO_MASTER_ACCESS_MSBYTE,
  45                                          &byte);
  46         if (status) {
  47                 rsi_dbg(ERR_ZONE,
  48                         "%s: fail to access MASTER_ACCESS_MSBYTE\n",
  49                         __func__);
  50                 return -1;
  51         }
  52
  53         byte = (u8)(ms_word >> 8);
  54
  55         rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte);
  56         status = rsi_sdio_write_register(adapter,
  57                                          function,
  58                                          SDIO_MASTER_ACCESS_LSBYTE,
  59                                          &byte);
  60         return status;
  61 }
  62
  63 /**
  64  * rsi_copy_to_card() - This function includes the actual funtionality of
  65  *                      copying the TA firmware to the card.Basically this
  66  *                      function includes opening the TA file,reading the
  67  *                      TA file and writing their values in blocks of data.
  68  * @common: Pointer to the driver private structure.
  69  * @fw: Pointer to the firmware value to be written.
  70  * @len: length of firmware file.
  71  * @num_blocks: Number of blocks to be written to the card.
  72  *
  73  * Return: 0 on success and -1 on failure.
  74  */
  75 static int rsi_copy_to_card(struct rsi_common *common,
  76                             const u8 *fw,
  77                             u32 len,
  78                             u32 num_blocks)
  79 {
  80         struct rsi_hw *adapter = common->priv;
  81         struct rsi_91x_sdiodev *dev =
  82                 (struct rsi_91x_sdiodev *)adapter->rsi_dev;
  83         u32 indx, ii;
  84         u32 block_size = dev->tx_blk_size;
  85         u32 lsb_address;
  86         __le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR,
  87                           TA_PC_ZERO, TA_RELEASE_THREAD_VALUE };
  88         u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG,
  89                           TA_TH0_PC_REG, TA_RELEASE_THREAD_REG };
  90         u32 base_address;
  91         u16 msb_address;
  92
  93         base_address = TA_LOAD_ADDRESS;
  94         msb_address = base_address >> 16;
  95
  96         for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
  97                 lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
  98                 if (rsi_sdio_write_register_multiple(adapter,
  99                                                      lsb_address,
 100                                                      (u8 *)(fw + indx),
 101                                                      block_size)) {
 102                         rsi_dbg(ERR_ZONE,
 103                                 "%s: Unable to load %s blk\n", __func__,
 104                                 FIRMWARE_RSI9113);
 105                         return -1;
 106                 }
 107                 rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
 108                 base_address += block_size;
 109                 if ((base_address >> 16) != msb_address) {
 110                         msb_address += 1;
 111                         if (rsi_sdio_master_access_msword(adapter,
 112                                                           msb_address)) {
 113                                 rsi_dbg(ERR_ZONE,
 114                                         "%s: Unable to set ms word reg\n",
 115                                         __func__);
 116                                 return -1;
 117                         }
 118                 }
 119         }
 120
 121         if (len % block_size) {
 122                 lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
 123                 if (rsi_sdio_write_register_multiple(adapter,
 124                                                      lsb_address,
 125                                                      (u8 *)(fw + indx),
 126                                                      len % block_size)) {
 127                         rsi_dbg(ERR_ZONE,
 128                                 "%s: Unable to load f/w\n", __func__);
 129                         return -1;
 130                 }
 131         }
 132         rsi_dbg(INIT_ZONE,
 133                 "%s: Succesfully loaded TA instructions\n", __func__);
 134
 135         if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
 136                 rsi_dbg(ERR_ZONE,
 137                         "%s: Unable to set ms word to common reg\n",
 138                         __func__);
 139                 return -1;
 140         }
 141
 142         for (ii = 0; ii < ARRAY_SIZE(data); ii++) {
 143                 /* Bringing TA out of reset */
 144                 if (rsi_sdio_write_register_multiple(adapter,
 145                                                      (address[ii] |
 146                                                      RSI_SD_REQUEST_MASTER),
 147                                                      (u8 *)&data[ii],
 148                                                      4)) {
 149                         rsi_dbg(ERR_ZONE,
 150                                 "%s: Unable to hold TA threads\n", __func__);
 151                         return -1;
 152                 }
 153         }
 154
 155         rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
 156         return 0;
 157 }
 158
 159 /**
 160  * rsi_load_ta_instructions() - This function includes the actual funtionality
 161  *                              of loading the TA firmware.This function also
 162  *                              includes opening the TA file,reading the TA
 163  *                              file and writing their value in blocks of data.
 164  * @common: Pointer to the driver private structure.
 165  *
 166  * Return: status: 0 on success, -1 on failure.
 167  */
 168 static int rsi_load_ta_instructions(struct rsi_common *common)
 169 {
 170         struct rsi_hw *adapter = common->priv;
 171         struct rsi_91x_sdiodev *dev =
 172                 (struct rsi_91x_sdiodev *)adapter->rsi_dev;
 173         u32 len;
 174         u32 num_blocks;
 175         const u8 *fw;
 176         const struct firmware *fw_entry = NULL;
 177         u32 block_size = dev->tx_blk_size;
 178         int status = 0;
 179         u32 base_address;
 180         u16 msb_address;
 181
 182         if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
 183                 rsi_dbg(ERR_ZONE,
 184                         "%s: Unable to set ms word to common reg\n",
 185                         __func__);
 186                 return -1;
 187         }
 188         base_address = TA_LOAD_ADDRESS;
 189         msb_address = (base_address >> 16);
 190
 191         if (rsi_sdio_master_access_msword(adapter, msb_address)) {
 192                 rsi_dbg(ERR_ZONE,
 193                         "%s: Unable to set ms word reg\n", __func__);
 194                 return -1;
 195         }
 196
 197         status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
 198         if (status < 0) {
 199                 rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
 200                         __func__, FIRMWARE_RSI9113);
 201                 return status;
 202         }
 203
 204         /* Copy firmware into DMA-accessible memory */
 205         fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
 206         if (!fw) {
 207                 status = -ENOMEM;
 208                 goto out;
 209         }
 210         len = fw_entry->size;
 211
 212         if (len % 4)
 213                 len += (4 - (len % 4));
 214
 215         num_blocks = (len / block_size);
 216
 217         rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
 218         rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
 219
 220         status = rsi_copy_to_card(common, fw, len, num_blocks);
 221         kfree(fw);
 222
 223 out:
 224         release_firmware(fw_entry);
 225         return status;
 226 }
 227
 228 /**
 229  * rsi_process_pkt() - This Function reads rx_blocks register and figures out
 230  *                     the size of the rx pkt.
 231  * @common: Pointer to the driver private structure.
 232  *
 233  * Return: 0 on success, -1 on failure.
 234  */
 235 static int rsi_process_pkt(struct rsi_common *common)
 236 {
 237         struct rsi_hw *adapter = common->priv;
 238         u8 num_blks = 0;
 239         u32 rcv_pkt_len = 0;
 240         int status = 0;
 241
 242         status = rsi_sdio_read_register(adapter,
 243                                         SDIO_RX_NUM_BLOCKS_REG,
 244                                         &num_blks);
 245
 246         if (status) {
 247                 rsi_dbg(ERR_ZONE,
 248                         "%s: Failed to read pkt length from the card:\n",
 249                         __func__);
 250                 return status;
 251         }
 252         rcv_pkt_len = (num_blks * 256);
 253
 254         common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
 255         if (!common->rx_data_pkt) {
 256                 rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n",
 257                         __func__);
 258                 return -ENOMEM;
 259         }
 260
 261         status = rsi_sdio_host_intf_read_pkt(adapter,
 262                                              common->rx_data_pkt,
 263                                              rcv_pkt_len);
 264         if (status) {
 265                 rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n",
 266                         __func__);
 267                 goto fail;
 268         }
 269
 270         status = rsi_read_pkt(common, rcv_pkt_len);
 271
 272 fail:
 273         kfree(common->rx_data_pkt);
 274         return status;
 275 }
 276
 277 /**
 278  * rsi_init_sdio_slave_regs() - This function does the actual initialization
 279  *                              of SDBUS slave registers.
 280  * @adapter: Pointer to the adapter structure.
 281  *
 282  * Return: status: 0 on success, -1 on failure.
 283  */
 284 int rsi_init_sdio_slave_regs(struct rsi_hw *adapter)
 285 {
 286         struct rsi_91x_sdiodev *dev =
 287                 (struct rsi_91x_sdiodev *)adapter->rsi_dev;
 288         u8 function = 0;
 289         u8 byte;
 290         int status = 0;
 291
 292         if (dev->next_read_delay) {
 293                 byte = dev->next_read_delay;
 294                 status = rsi_sdio_write_register(adapter,
 295                                                  function,
 296                                                  SDIO_NXT_RD_DELAY2,
 297                                                  &byte);
 298                 if (status) {
 299                         rsi_dbg(ERR_ZONE,
 300                                 "%s: Failed to write SDIO_NXT_RD_DELAY2\n",
 301                                 __func__);
 302                         return -1;
 303                 }
 304         }
 305
 306         if (dev->sdio_high_speed_enable) {
 307                 rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__);
 308                 byte = 0x3;
 309
 310                 status = rsi_sdio_write_register(adapter,
 311                                                  function,
 312                                                  SDIO_REG_HIGH_SPEED,
 313                                                  &byte);
 314                 if (status) {
 315                         rsi_dbg(ERR_ZONE,
 316                                 "%s: Failed to enable SDIO high speed\n",
 317                                 __func__);
 318                         return -1;
 319                 }
 320         }
 321
 322         /* This tells SDIO FIFO when to start read to host */
 323         rsi_dbg(INIT_ZONE, "%s: Initialzing SDIO read start level\n", __func__);
 324         byte = 0x24;
 325
 326         status = rsi_sdio_write_register(adapter,
 327                                          function,
 328                                          SDIO_READ_START_LVL,
 329                                          &byte);
 330         if (status) {
 331                 rsi_dbg(ERR_ZONE,
 332                         "%s: Failed to write SDIO_READ_START_LVL\n", __func__);
 333                 return -1;
 334         }
 335
 336         rsi_dbg(INIT_ZONE, "%s: Initialzing FIFO ctrl registers\n", __func__);
 337         byte = (128 - 32);
 338
 339         status = rsi_sdio_write_register(adapter,
 340                                          function,
 341                                          SDIO_READ_FIFO_CTL,
 342                                          &byte);
 343         if (status) {
 344                 rsi_dbg(ERR_ZONE,
 345                         "%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__);
 346                 return -1;
 347         }
 348
 349         byte = 32;
 350         status = rsi_sdio_write_register(adapter,
 351                                          function,
 352                                          SDIO_WRITE_FIFO_CTL,
 353                                          &byte);
 354         if (status) {
 355                 rsi_dbg(ERR_ZONE,
 356                         "%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__);
 357                 return -1;
 358         }
 359
 360         return 0;
 361 }
 362
 363 /**
 364  * rsi_interrupt_handler() - This function read and process SDIO interrupts.
 365  * @adapter: Pointer to the adapter structure.
 366  *
 367  * Return: None.
 368  */
 369 void rsi_interrupt_handler(struct rsi_hw *adapter)
 370 {
 371         struct rsi_common *common = adapter->priv;
 372         struct rsi_91x_sdiodev *dev =
 373                 (struct rsi_91x_sdiodev *)adapter->rsi_dev;
 374         int status;
 375         enum sdio_interrupt_type isr_type;
 376         u8 isr_status = 0;
 377         u8 fw_status = 0;
 378
 379         dev->rx_info.sdio_int_counter++;
 380
 381         do {
 382                 mutex_lock(&common->tx_rxlock);
 383                 status = rsi_sdio_read_register(common->priv,
 384                                                 RSI_FN1_INT_REGISTER,
 385                                                 &isr_status);
 386                 if (status) {
 387                         rsi_dbg(ERR_ZONE,
 388                                 "%s: Failed to Read Intr Status Register\n",
 389                                 __func__);
 390                         mutex_unlock(&common->tx_rxlock);
 391                         return;
 392                 }
 393
 394                 if (isr_status == 0) {
 395                         rsi_set_event(&common->tx_thread.event);
 396                         dev->rx_info.sdio_intr_status_zero++;
 397                         mutex_unlock(&common->tx_rxlock);
 398                         return;
 399                 }
 400
 401                 rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n",
 402                         __func__, isr_status, (1 << MSDU_PKT_PENDING),
 403                         (1 << FW_ASSERT_IND));
 404
 405                 do {
 406                         RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);
 407
 408                         switch (isr_type) {
 409                         case BUFFER_AVAILABLE:
 410                                 dev->rx_info.watch_bufferfull_count = 0;
 411                                 dev->rx_info.buffer_full = false;
 412                                 dev->rx_info.semi_buffer_full = false;
 413                                 dev->rx_info.mgmt_buffer_full = false;
 414                                 rsi_sdio_ack_intr(common->priv,
 415                                                   (1 << PKT_BUFF_AVAILABLE));
 416                                 rsi_set_event(&common->tx_thread.event);
 417
 418                                 rsi_dbg(ISR_ZONE,
 419                                         "%s: ==> BUFFER_AVAILABLE <==\n",
 420                                         __func__);
 421                                 dev->rx_info.buf_available_counter++;
 422                                 break;
 423
 424                         case FIRMWARE_ASSERT_IND:
 425                                 rsi_dbg(ERR_ZONE,
 426                                         "%s: ==> FIRMWARE Assert <==\n",
 427                                         __func__);
 428                                 status = rsi_sdio_read_register(common->priv,
 429                                                         SDIO_FW_STATUS_REG,
 430                                                         &fw_status);
 431                                 if (status) {
 432                                         rsi_dbg(ERR_ZONE,
 433                                                 "%s: Failed to read f/w reg\n",
 434                                                 __func__);
 435                                 } else {
 436                                         rsi_dbg(ERR_ZONE,
 437                                                 "%s: Firmware Status is 0x%x\n",
 438                                                 __func__ , fw_status);
 439                                         rsi_sdio_ack_intr(common->priv,
 440                                                           (1 << FW_ASSERT_IND));
 441                                 }
 442
 443                                 common->fsm_state = FSM_CARD_NOT_READY;
 444                                 break;
 445
 446                         case MSDU_PACKET_PENDING:
 447                                 rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
 448                                 dev->rx_info.total_sdio_msdu_pending_intr++;
 449
 450                                 status = rsi_process_pkt(common);
 451                                 if (status) {
 452                                         rsi_dbg(ERR_ZONE,
 453                                                 "%s: Failed to read pkt\n",
 454                                                 __func__);
 455                                         mutex_unlock(&common->tx_rxlock);
 456                                         return;
 457                                 }
 458                                 break;
 459                         default:
 460                                 rsi_sdio_ack_intr(common->priv, isr_status);
 461                                 dev->rx_info.total_sdio_unknown_intr++;
 462                                 isr_status = 0;
 463                                 rsi_dbg(ISR_ZONE,
 464                                         "Unknown Interrupt %x\n",
 465                                         isr_status);
 466                                 break;
 467                         }
 468                         isr_status ^= BIT(isr_type - 1);
 469                 } while (isr_status);
 470                 mutex_unlock(&common->tx_rxlock);
 471         } while (1);
 472 }
 473
 474 /**
 475  * rsi_device_init() - This Function Initializes The HAL.
 476  * @common: Pointer to the driver private structure.
 477  *
 478  * Return: 0 on success, -1 on failure.
 479  */
 480 int rsi_sdio_device_init(struct rsi_common *common)
 481 {
 482         if (rsi_load_ta_instructions(common))
 483                 return -1;
 484
 485         if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) {
 486                 rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n",
 487                         __func__);
 488                 return -1;
 489         }
 490         rsi_dbg(INIT_ZONE,
 491                 "%s: Setting ms word to 0x41050000\n", __func__);
 492
 493         return 0;
 494 }
 495
 496 /**
 497  * rsi_sdio_read_buffer_status_register() - This function is used to the read
 498  *                                          buffer status register and set
 499  *                                          relevant fields in
 500  *                                          rsi_91x_sdiodev struct.
 501  * @adapter: Pointer to the driver hw structure.
 502  * @q_num: The Q number whose status is to be found.
 503  *
 504  * Return: status: -1 on failure or else queue full/stop is indicated.
 505  */
 506 int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num)
 507 {
 508         struct rsi_common *common = adapter->priv;
 509         struct rsi_91x_sdiodev *dev =
 510                 (struct rsi_91x_sdiodev *)adapter->rsi_dev;
 511         u8 buf_status = 0;
 512         int status = 0;
 513
 514         status = rsi_sdio_read_register(common->priv,
 515                                         RSI_DEVICE_BUFFER_STATUS_REGISTER,
 516                                         &buf_status);
 517
 518         if (status) {
 519                 rsi_dbg(ERR_ZONE,
 520                         "%s: Failed to read status register\n", __func__);
 521                 return -1;
 522         }
 523
 524         if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) {
 525                 if (!dev->rx_info.mgmt_buffer_full)
 526                         dev->rx_info.mgmt_buf_full_counter++;
 527                 dev->rx_info.mgmt_buffer_full = true;
 528         } else {
 529                 dev->rx_info.mgmt_buffer_full = false;
 530         }
 531
 532         if (buf_status & (BIT(PKT_BUFF_FULL))) {
 533                 if (!dev->rx_info.buffer_full)
 534                         dev->rx_info.buf_full_counter++;
 535                 dev->rx_info.buffer_full = true;
 536         } else {
 537                 dev->rx_info.buffer_full = false;
 538         }
 539
 540         if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) {
 541                 if (!dev->rx_info.semi_buffer_full)
 542                         dev->rx_info.buf_semi_full_counter++;
 543                 dev->rx_info.semi_buffer_full = true;
 544         } else {
 545                 dev->rx_info.semi_buffer_full = false;
 546         }
 547
 548         if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full))
 549                 return QUEUE_FULL;
 550
 551         if (dev->rx_info.buffer_full)
 552                 return QUEUE_FULL;
 553
 554         return QUEUE_NOT_FULL;
 555 }
 556
 557 /**
 558  * rsi_sdio_determine_event_timeout() - This Function determines the event
 559  *                                      timeout duration.
 560  * @adapter: Pointer to the adapter structure.
 561  *
 562  * Return: timeout duration is returned.
 563  */
 564 int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter)
 565 {
 566         struct rsi_91x_sdiodev *dev =
 567                 (struct rsi_91x_sdiodev *)adapter->rsi_dev;
 568
 569         /* Once buffer full is seen, event timeout to occur every 2 msecs */
 570         if (dev->rx_info.buffer_full)
 571                 return 2;
 572
 573         return EVENT_WAIT_FOREVER;
 574 }