staging/atomisp: fix spelling mistake: "falied" -> "failed"
[linux/fpc-iii.git] / lib / swiotlb.c
bloba8d74a733a38b54a912f5e292f0a15a2cfff4a95
1 /*
2 * Dynamic DMA mapping support.
4 * This implementation is a fallback for platforms that do not support
5 * I/O TLBs (aka DMA address translation hardware).
6 * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
7 * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
8 * Copyright (C) 2000, 2003 Hewlett-Packard Co
9 * David Mosberger-Tang <davidm@hpl.hp.com>
11 * 03/05/07 davidm Switch from PCI-DMA to generic device DMA API.
12 * 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid
13 * unnecessary i-cache flushing.
14 * 04/07/.. ak Better overflow handling. Assorted fixes.
15 * 05/09/10 linville Add support for syncing ranges, support syncing for
16 * DMA_BIDIRECTIONAL mappings, miscellaneous cleanup.
17 * 08/12/11 beckyb Add highmem support
20 #include <linux/cache.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/mm.h>
23 #include <linux/export.h>
24 #include <linux/spinlock.h>
25 #include <linux/string.h>
26 #include <linux/swiotlb.h>
27 #include <linux/pfn.h>
28 #include <linux/types.h>
29 #include <linux/ctype.h>
30 #include <linux/highmem.h>
31 #include <linux/gfp.h>
32 #include <linux/scatterlist.h>
34 #include <asm/io.h>
35 #include <asm/dma.h>
37 #include <linux/init.h>
38 #include <linux/bootmem.h>
39 #include <linux/iommu-helper.h>
41 #define CREATE_TRACE_POINTS
42 #include <trace/events/swiotlb.h>
44 #define OFFSET(val,align) ((unsigned long) \
45 ( (val) & ( (align) - 1)))
47 #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
50 * Minimum IO TLB size to bother booting with. Systems with mainly
51 * 64bit capable cards will only lightly use the swiotlb. If we can't
52 * allocate a contiguous 1MB, we're probably in trouble anyway.
54 #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
56 enum swiotlb_force swiotlb_force;
59 * Used to do a quick range check in swiotlb_tbl_unmap_single and
60 * swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this
61 * API.
63 static phys_addr_t io_tlb_start, io_tlb_end;
66 * The number of IO TLB blocks (in groups of 64) between io_tlb_start and
67 * io_tlb_end. This is command line adjustable via setup_io_tlb_npages.
69 static unsigned long io_tlb_nslabs;
72 * When the IOMMU overflows we return a fallback buffer. This sets the size.
74 static unsigned long io_tlb_overflow = 32*1024;
76 static phys_addr_t io_tlb_overflow_buffer;
79 * This is a free list describing the number of free entries available from
80 * each index
82 static unsigned int *io_tlb_list;
83 static unsigned int io_tlb_index;
86 * Max segment that we can provide which (if pages are contingous) will
87 * not be bounced (unless SWIOTLB_FORCE is set).
89 unsigned int max_segment;
92 * We need to save away the original address corresponding to a mapped entry
93 * for the sync operations.
95 #define INVALID_PHYS_ADDR (~(phys_addr_t)0)
96 static phys_addr_t *io_tlb_orig_addr;
99 * Protect the above data structures in the map and unmap calls
101 static DEFINE_SPINLOCK(io_tlb_lock);
103 static int late_alloc;
105 static int __init
106 setup_io_tlb_npages(char *str)
108 if (isdigit(*str)) {
109 io_tlb_nslabs = simple_strtoul(str, &str, 0);
110 /* avoid tail segment of size < IO_TLB_SEGSIZE */
111 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
113 if (*str == ',')
114 ++str;
115 if (!strcmp(str, "force")) {
116 swiotlb_force = SWIOTLB_FORCE;
117 } else if (!strcmp(str, "noforce")) {
118 swiotlb_force = SWIOTLB_NO_FORCE;
119 io_tlb_nslabs = 1;
122 return 0;
124 early_param("swiotlb", setup_io_tlb_npages);
125 /* make io_tlb_overflow tunable too? */
127 unsigned long swiotlb_nr_tbl(void)
129 return io_tlb_nslabs;
131 EXPORT_SYMBOL_GPL(swiotlb_nr_tbl);
133 unsigned int swiotlb_max_segment(void)
135 return max_segment;
137 EXPORT_SYMBOL_GPL(swiotlb_max_segment);
139 void swiotlb_set_max_segment(unsigned int val)
141 if (swiotlb_force == SWIOTLB_FORCE)
142 max_segment = 1;
143 else
144 max_segment = rounddown(val, PAGE_SIZE);
147 /* default to 64MB */
148 #define IO_TLB_DEFAULT_SIZE (64UL<<20)
149 unsigned long swiotlb_size_or_default(void)
151 unsigned long size;
153 size = io_tlb_nslabs << IO_TLB_SHIFT;
155 return size ? size : (IO_TLB_DEFAULT_SIZE);
158 /* Note that this doesn't work with highmem page */
159 static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
160 volatile void *address)
162 return phys_to_dma(hwdev, virt_to_phys(address));
165 static bool no_iotlb_memory;
167 void swiotlb_print_info(void)
169 unsigned long bytes = io_tlb_nslabs << IO_TLB_SHIFT;
170 unsigned char *vstart, *vend;
172 if (no_iotlb_memory) {
173 pr_warn("software IO TLB: No low mem\n");
174 return;
177 vstart = phys_to_virt(io_tlb_start);
178 vend = phys_to_virt(io_tlb_end);
180 printk(KERN_INFO "software IO TLB [mem %#010llx-%#010llx] (%luMB) mapped at [%p-%p]\n",
181 (unsigned long long)io_tlb_start,
182 (unsigned long long)io_tlb_end,
183 bytes >> 20, vstart, vend - 1);
186 int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
188 void *v_overflow_buffer;
189 unsigned long i, bytes;
191 bytes = nslabs << IO_TLB_SHIFT;
193 io_tlb_nslabs = nslabs;
194 io_tlb_start = __pa(tlb);
195 io_tlb_end = io_tlb_start + bytes;
198 * Get the overflow emergency buffer
200 v_overflow_buffer = memblock_virt_alloc_low_nopanic(
201 PAGE_ALIGN(io_tlb_overflow),
202 PAGE_SIZE);
203 if (!v_overflow_buffer)
204 return -ENOMEM;
206 io_tlb_overflow_buffer = __pa(v_overflow_buffer);
209 * Allocate and initialize the free list array. This array is used
210 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
211 * between io_tlb_start and io_tlb_end.
213 io_tlb_list = memblock_virt_alloc(
214 PAGE_ALIGN(io_tlb_nslabs * sizeof(int)),
215 PAGE_SIZE);
216 io_tlb_orig_addr = memblock_virt_alloc(
217 PAGE_ALIGN(io_tlb_nslabs * sizeof(phys_addr_t)),
218 PAGE_SIZE);
219 for (i = 0; i < io_tlb_nslabs; i++) {
220 io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
221 io_tlb_orig_addr[i] = INVALID_PHYS_ADDR;
223 io_tlb_index = 0;
225 if (verbose)
226 swiotlb_print_info();
228 swiotlb_set_max_segment(io_tlb_nslabs << IO_TLB_SHIFT);
229 return 0;
233 * Statically reserve bounce buffer space and initialize bounce buffer data
234 * structures for the software IO TLB used to implement the DMA API.
236 void __init
237 swiotlb_init(int verbose)
239 size_t default_size = IO_TLB_DEFAULT_SIZE;
240 unsigned char *vstart;
241 unsigned long bytes;
243 if (!io_tlb_nslabs) {
244 io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
245 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
248 bytes = io_tlb_nslabs << IO_TLB_SHIFT;
250 /* Get IO TLB memory from the low pages */
251 vstart = memblock_virt_alloc_low_nopanic(PAGE_ALIGN(bytes), PAGE_SIZE);
252 if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
253 return;
255 if (io_tlb_start)
256 memblock_free_early(io_tlb_start,
257 PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
258 pr_warn("Cannot allocate SWIOTLB buffer");
259 no_iotlb_memory = true;
263 * Systems with larger DMA zones (those that don't support ISA) can
264 * initialize the swiotlb later using the slab allocator if needed.
265 * This should be just like above, but with some error catching.
268 swiotlb_late_init_with_default_size(size_t default_size)
270 unsigned long bytes, req_nslabs = io_tlb_nslabs;
271 unsigned char *vstart = NULL;
272 unsigned int order;
273 int rc = 0;
275 if (!io_tlb_nslabs) {
276 io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
277 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
281 * Get IO TLB memory from the low pages
283 order = get_order(io_tlb_nslabs << IO_TLB_SHIFT);
284 io_tlb_nslabs = SLABS_PER_PAGE << order;
285 bytes = io_tlb_nslabs << IO_TLB_SHIFT;
287 while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
288 vstart = (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
289 order);
290 if (vstart)
291 break;
292 order--;
295 if (!vstart) {
296 io_tlb_nslabs = req_nslabs;
297 return -ENOMEM;
299 if (order != get_order(bytes)) {
300 printk(KERN_WARNING "Warning: only able to allocate %ld MB "
301 "for software IO TLB\n", (PAGE_SIZE << order) >> 20);
302 io_tlb_nslabs = SLABS_PER_PAGE << order;
304 rc = swiotlb_late_init_with_tbl(vstart, io_tlb_nslabs);
305 if (rc)
306 free_pages((unsigned long)vstart, order);
308 return rc;
312 swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs)
314 unsigned long i, bytes;
315 unsigned char *v_overflow_buffer;
317 bytes = nslabs << IO_TLB_SHIFT;
319 io_tlb_nslabs = nslabs;
320 io_tlb_start = virt_to_phys(tlb);
321 io_tlb_end = io_tlb_start + bytes;
323 memset(tlb, 0, bytes);
326 * Get the overflow emergency buffer
328 v_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
329 get_order(io_tlb_overflow));
330 if (!v_overflow_buffer)
331 goto cleanup2;
333 io_tlb_overflow_buffer = virt_to_phys(v_overflow_buffer);
336 * Allocate and initialize the free list array. This array is used
337 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
338 * between io_tlb_start and io_tlb_end.
340 io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
341 get_order(io_tlb_nslabs * sizeof(int)));
342 if (!io_tlb_list)
343 goto cleanup3;
345 io_tlb_orig_addr = (phys_addr_t *)
346 __get_free_pages(GFP_KERNEL,
347 get_order(io_tlb_nslabs *
348 sizeof(phys_addr_t)));
349 if (!io_tlb_orig_addr)
350 goto cleanup4;
352 for (i = 0; i < io_tlb_nslabs; i++) {
353 io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
354 io_tlb_orig_addr[i] = INVALID_PHYS_ADDR;
356 io_tlb_index = 0;
358 swiotlb_print_info();
360 late_alloc = 1;
362 swiotlb_set_max_segment(io_tlb_nslabs << IO_TLB_SHIFT);
364 return 0;
366 cleanup4:
367 free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
368 sizeof(int)));
369 io_tlb_list = NULL;
370 cleanup3:
371 free_pages((unsigned long)v_overflow_buffer,
372 get_order(io_tlb_overflow));
373 io_tlb_overflow_buffer = 0;
374 cleanup2:
375 io_tlb_end = 0;
376 io_tlb_start = 0;
377 io_tlb_nslabs = 0;
378 max_segment = 0;
379 return -ENOMEM;
382 void __init swiotlb_free(void)
384 if (!io_tlb_orig_addr)
385 return;
387 if (late_alloc) {
388 free_pages((unsigned long)phys_to_virt(io_tlb_overflow_buffer),
389 get_order(io_tlb_overflow));
390 free_pages((unsigned long)io_tlb_orig_addr,
391 get_order(io_tlb_nslabs * sizeof(phys_addr_t)));
392 free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
393 sizeof(int)));
394 free_pages((unsigned long)phys_to_virt(io_tlb_start),
395 get_order(io_tlb_nslabs << IO_TLB_SHIFT));
396 } else {
397 memblock_free_late(io_tlb_overflow_buffer,
398 PAGE_ALIGN(io_tlb_overflow));
399 memblock_free_late(__pa(io_tlb_orig_addr),
400 PAGE_ALIGN(io_tlb_nslabs * sizeof(phys_addr_t)));
401 memblock_free_late(__pa(io_tlb_list),
402 PAGE_ALIGN(io_tlb_nslabs * sizeof(int)));
403 memblock_free_late(io_tlb_start,
404 PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
406 io_tlb_nslabs = 0;
407 max_segment = 0;
410 int is_swiotlb_buffer(phys_addr_t paddr)
412 return paddr >= io_tlb_start && paddr < io_tlb_end;
416 * Bounce: copy the swiotlb buffer back to the original dma location
418 static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr,
419 size_t size, enum dma_data_direction dir)
421 unsigned long pfn = PFN_DOWN(orig_addr);
422 unsigned char *vaddr = phys_to_virt(tlb_addr);
424 if (PageHighMem(pfn_to_page(pfn))) {
425 /* The buffer does not have a mapping. Map it in and copy */
426 unsigned int offset = orig_addr & ~PAGE_MASK;
427 char *buffer;
428 unsigned int sz = 0;
429 unsigned long flags;
431 while (size) {
432 sz = min_t(size_t, PAGE_SIZE - offset, size);
434 local_irq_save(flags);
435 buffer = kmap_atomic(pfn_to_page(pfn));
436 if (dir == DMA_TO_DEVICE)
437 memcpy(vaddr, buffer + offset, sz);
438 else
439 memcpy(buffer + offset, vaddr, sz);
440 kunmap_atomic(buffer);
441 local_irq_restore(flags);
443 size -= sz;
444 pfn++;
445 vaddr += sz;
446 offset = 0;
448 } else if (dir == DMA_TO_DEVICE) {
449 memcpy(vaddr, phys_to_virt(orig_addr), size);
450 } else {
451 memcpy(phys_to_virt(orig_addr), vaddr, size);
455 phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
456 dma_addr_t tbl_dma_addr,
457 phys_addr_t orig_addr, size_t size,
458 enum dma_data_direction dir,
459 unsigned long attrs)
461 unsigned long flags;
462 phys_addr_t tlb_addr;
463 unsigned int nslots, stride, index, wrap;
464 int i;
465 unsigned long mask;
466 unsigned long offset_slots;
467 unsigned long max_slots;
469 if (no_iotlb_memory)
470 panic("Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer");
472 mask = dma_get_seg_boundary(hwdev);
474 tbl_dma_addr &= mask;
476 offset_slots = ALIGN(tbl_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
479 * Carefully handle integer overflow which can occur when mask == ~0UL.
481 max_slots = mask + 1
482 ? ALIGN(mask + 1, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT
483 : 1UL << (BITS_PER_LONG - IO_TLB_SHIFT);
486 * For mappings greater than or equal to a page, we limit the stride
487 * (and hence alignment) to a page size.
489 nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
490 if (size >= PAGE_SIZE)
491 stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT));
492 else
493 stride = 1;
495 BUG_ON(!nslots);
498 * Find suitable number of IO TLB entries size that will fit this
499 * request and allocate a buffer from that IO TLB pool.
501 spin_lock_irqsave(&io_tlb_lock, flags);
502 index = ALIGN(io_tlb_index, stride);
503 if (index >= io_tlb_nslabs)
504 index = 0;
505 wrap = index;
507 do {
508 while (iommu_is_span_boundary(index, nslots, offset_slots,
509 max_slots)) {
510 index += stride;
511 if (index >= io_tlb_nslabs)
512 index = 0;
513 if (index == wrap)
514 goto not_found;
518 * If we find a slot that indicates we have 'nslots' number of
519 * contiguous buffers, we allocate the buffers from that slot
520 * and mark the entries as '0' indicating unavailable.
522 if (io_tlb_list[index] >= nslots) {
523 int count = 0;
525 for (i = index; i < (int) (index + nslots); i++)
526 io_tlb_list[i] = 0;
527 for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE - 1) && io_tlb_list[i]; i--)
528 io_tlb_list[i] = ++count;
529 tlb_addr = io_tlb_start + (index << IO_TLB_SHIFT);
532 * Update the indices to avoid searching in the next
533 * round.
535 io_tlb_index = ((index + nslots) < io_tlb_nslabs
536 ? (index + nslots) : 0);
538 goto found;
540 index += stride;
541 if (index >= io_tlb_nslabs)
542 index = 0;
543 } while (index != wrap);
545 not_found:
546 spin_unlock_irqrestore(&io_tlb_lock, flags);
547 if (printk_ratelimit())
548 dev_warn(hwdev, "swiotlb buffer is full (sz: %zd bytes)\n", size);
549 return SWIOTLB_MAP_ERROR;
550 found:
551 spin_unlock_irqrestore(&io_tlb_lock, flags);
554 * Save away the mapping from the original address to the DMA address.
555 * This is needed when we sync the memory. Then we sync the buffer if
556 * needed.
558 for (i = 0; i < nslots; i++)
559 io_tlb_orig_addr[index+i] = orig_addr + (i << IO_TLB_SHIFT);
560 if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
561 (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
562 swiotlb_bounce(orig_addr, tlb_addr, size, DMA_TO_DEVICE);
564 return tlb_addr;
566 EXPORT_SYMBOL_GPL(swiotlb_tbl_map_single);
569 * Allocates bounce buffer and returns its kernel virtual address.
572 static phys_addr_t
573 map_single(struct device *hwdev, phys_addr_t phys, size_t size,
574 enum dma_data_direction dir, unsigned long attrs)
576 dma_addr_t start_dma_addr;
578 if (swiotlb_force == SWIOTLB_NO_FORCE) {
579 dev_warn_ratelimited(hwdev, "Cannot do DMA to address %pa\n",
580 &phys);
581 return SWIOTLB_MAP_ERROR;
584 start_dma_addr = phys_to_dma(hwdev, io_tlb_start);
585 return swiotlb_tbl_map_single(hwdev, start_dma_addr, phys, size,
586 dir, attrs);
590 * dma_addr is the kernel virtual address of the bounce buffer to unmap.
592 void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
593 size_t size, enum dma_data_direction dir,
594 unsigned long attrs)
596 unsigned long flags;
597 int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
598 int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;
599 phys_addr_t orig_addr = io_tlb_orig_addr[index];
602 * First, sync the memory before unmapping the entry
604 if (orig_addr != INVALID_PHYS_ADDR &&
605 !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
606 ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
607 swiotlb_bounce(orig_addr, tlb_addr, size, DMA_FROM_DEVICE);
610 * Return the buffer to the free list by setting the corresponding
611 * entries to indicate the number of contiguous entries available.
612 * While returning the entries to the free list, we merge the entries
613 * with slots below and above the pool being returned.
615 spin_lock_irqsave(&io_tlb_lock, flags);
617 count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ?
618 io_tlb_list[index + nslots] : 0);
620 * Step 1: return the slots to the free list, merging the
621 * slots with superceeding slots
623 for (i = index + nslots - 1; i >= index; i--) {
624 io_tlb_list[i] = ++count;
625 io_tlb_orig_addr[i] = INVALID_PHYS_ADDR;
628 * Step 2: merge the returned slots with the preceding slots,
629 * if available (non zero)
631 for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
632 io_tlb_list[i] = ++count;
634 spin_unlock_irqrestore(&io_tlb_lock, flags);
636 EXPORT_SYMBOL_GPL(swiotlb_tbl_unmap_single);
638 void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
639 size_t size, enum dma_data_direction dir,
640 enum dma_sync_target target)
642 int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;
643 phys_addr_t orig_addr = io_tlb_orig_addr[index];
645 if (orig_addr == INVALID_PHYS_ADDR)
646 return;
647 orig_addr += (unsigned long)tlb_addr & ((1 << IO_TLB_SHIFT) - 1);
649 switch (target) {
650 case SYNC_FOR_CPU:
651 if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
652 swiotlb_bounce(orig_addr, tlb_addr,
653 size, DMA_FROM_DEVICE);
654 else
655 BUG_ON(dir != DMA_TO_DEVICE);
656 break;
657 case SYNC_FOR_DEVICE:
658 if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
659 swiotlb_bounce(orig_addr, tlb_addr,
660 size, DMA_TO_DEVICE);
661 else
662 BUG_ON(dir != DMA_FROM_DEVICE);
663 break;
664 default:
665 BUG();
668 EXPORT_SYMBOL_GPL(swiotlb_tbl_sync_single);
670 void *
671 swiotlb_alloc_coherent(struct device *hwdev, size_t size,
672 dma_addr_t *dma_handle, gfp_t flags)
674 dma_addr_t dev_addr;
675 void *ret;
676 int order = get_order(size);
677 u64 dma_mask = DMA_BIT_MASK(32);
679 if (hwdev && hwdev->coherent_dma_mask)
680 dma_mask = hwdev->coherent_dma_mask;
682 ret = (void *)__get_free_pages(flags, order);
683 if (ret) {
684 dev_addr = swiotlb_virt_to_bus(hwdev, ret);
685 if (dev_addr + size - 1 > dma_mask) {
687 * The allocated memory isn't reachable by the device.
689 free_pages((unsigned long) ret, order);
690 ret = NULL;
693 if (!ret) {
695 * We are either out of memory or the device can't DMA to
696 * GFP_DMA memory; fall back on map_single(), which
697 * will grab memory from the lowest available address range.
699 phys_addr_t paddr = map_single(hwdev, 0, size,
700 DMA_FROM_DEVICE, 0);
701 if (paddr == SWIOTLB_MAP_ERROR)
702 goto err_warn;
704 ret = phys_to_virt(paddr);
705 dev_addr = phys_to_dma(hwdev, paddr);
707 /* Confirm address can be DMA'd by device */
708 if (dev_addr + size - 1 > dma_mask) {
709 printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n",
710 (unsigned long long)dma_mask,
711 (unsigned long long)dev_addr);
714 * DMA_TO_DEVICE to avoid memcpy in unmap_single.
715 * The DMA_ATTR_SKIP_CPU_SYNC is optional.
717 swiotlb_tbl_unmap_single(hwdev, paddr,
718 size, DMA_TO_DEVICE,
719 DMA_ATTR_SKIP_CPU_SYNC);
720 goto err_warn;
724 *dma_handle = dev_addr;
725 memset(ret, 0, size);
727 return ret;
729 err_warn:
730 pr_warn("swiotlb: coherent allocation failed for device %s size=%zu\n",
731 dev_name(hwdev), size);
732 dump_stack();
734 return NULL;
736 EXPORT_SYMBOL(swiotlb_alloc_coherent);
738 void
739 swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
740 dma_addr_t dev_addr)
742 phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
744 WARN_ON(irqs_disabled());
745 if (!is_swiotlb_buffer(paddr))
746 free_pages((unsigned long)vaddr, get_order(size));
747 else
749 * DMA_TO_DEVICE to avoid memcpy in swiotlb_tbl_unmap_single.
750 * DMA_ATTR_SKIP_CPU_SYNC is optional.
752 swiotlb_tbl_unmap_single(hwdev, paddr, size, DMA_TO_DEVICE,
753 DMA_ATTR_SKIP_CPU_SYNC);
755 EXPORT_SYMBOL(swiotlb_free_coherent);
757 static void
758 swiotlb_full(struct device *dev, size_t size, enum dma_data_direction dir,
759 int do_panic)
761 if (swiotlb_force == SWIOTLB_NO_FORCE)
762 return;
765 * Ran out of IOMMU space for this operation. This is very bad.
766 * Unfortunately the drivers cannot handle this operation properly.
767 * unless they check for dma_mapping_error (most don't)
768 * When the mapping is small enough return a static buffer to limit
769 * the damage, or panic when the transfer is too big.
771 dev_err_ratelimited(dev, "DMA: Out of SW-IOMMU space for %zu bytes\n",
772 size);
774 if (size <= io_tlb_overflow || !do_panic)
775 return;
777 if (dir == DMA_BIDIRECTIONAL)
778 panic("DMA: Random memory could be DMA accessed\n");
779 if (dir == DMA_FROM_DEVICE)
780 panic("DMA: Random memory could be DMA written\n");
781 if (dir == DMA_TO_DEVICE)
782 panic("DMA: Random memory could be DMA read\n");
786 * Map a single buffer of the indicated size for DMA in streaming mode. The
787 * physical address to use is returned.
789 * Once the device is given the dma address, the device owns this memory until
790 * either swiotlb_unmap_page or swiotlb_dma_sync_single is performed.
792 dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
793 unsigned long offset, size_t size,
794 enum dma_data_direction dir,
795 unsigned long attrs)
797 phys_addr_t map, phys = page_to_phys(page) + offset;
798 dma_addr_t dev_addr = phys_to_dma(dev, phys);
800 BUG_ON(dir == DMA_NONE);
802 * If the address happens to be in the device's DMA window,
803 * we can safely return the device addr and not worry about bounce
804 * buffering it.
806 if (dma_capable(dev, dev_addr, size) && swiotlb_force != SWIOTLB_FORCE)
807 return dev_addr;
809 trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
811 /* Oh well, have to allocate and map a bounce buffer. */
812 map = map_single(dev, phys, size, dir, attrs);
813 if (map == SWIOTLB_MAP_ERROR) {
814 swiotlb_full(dev, size, dir, 1);
815 return phys_to_dma(dev, io_tlb_overflow_buffer);
818 dev_addr = phys_to_dma(dev, map);
820 /* Ensure that the address returned is DMA'ble */
821 if (dma_capable(dev, dev_addr, size))
822 return dev_addr;
824 attrs |= DMA_ATTR_SKIP_CPU_SYNC;
825 swiotlb_tbl_unmap_single(dev, map, size, dir, attrs);
827 return phys_to_dma(dev, io_tlb_overflow_buffer);
829 EXPORT_SYMBOL_GPL(swiotlb_map_page);
832 * Unmap a single streaming mode DMA translation. The dma_addr and size must
833 * match what was provided for in a previous swiotlb_map_page call. All
834 * other usages are undefined.
836 * After this call, reads by the cpu to the buffer are guaranteed to see
837 * whatever the device wrote there.
839 static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
840 size_t size, enum dma_data_direction dir,
841 unsigned long attrs)
843 phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
845 BUG_ON(dir == DMA_NONE);
847 if (is_swiotlb_buffer(paddr)) {
848 swiotlb_tbl_unmap_single(hwdev, paddr, size, dir, attrs);
849 return;
852 if (dir != DMA_FROM_DEVICE)
853 return;
856 * phys_to_virt doesn't work with hihgmem page but we could
857 * call dma_mark_clean() with hihgmem page here. However, we
858 * are fine since dma_mark_clean() is null on POWERPC. We can
859 * make dma_mark_clean() take a physical address if necessary.
861 dma_mark_clean(phys_to_virt(paddr), size);
864 void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
865 size_t size, enum dma_data_direction dir,
866 unsigned long attrs)
868 unmap_single(hwdev, dev_addr, size, dir, attrs);
870 EXPORT_SYMBOL_GPL(swiotlb_unmap_page);
873 * Make physical memory consistent for a single streaming mode DMA translation
874 * after a transfer.
876 * If you perform a swiotlb_map_page() but wish to interrogate the buffer
877 * using the cpu, yet do not wish to teardown the dma mapping, you must
878 * call this function before doing so. At the next point you give the dma
879 * address back to the card, you must first perform a
880 * swiotlb_dma_sync_for_device, and then the device again owns the buffer
882 static void
883 swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
884 size_t size, enum dma_data_direction dir,
885 enum dma_sync_target target)
887 phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
889 BUG_ON(dir == DMA_NONE);
891 if (is_swiotlb_buffer(paddr)) {
892 swiotlb_tbl_sync_single(hwdev, paddr, size, dir, target);
893 return;
896 if (dir != DMA_FROM_DEVICE)
897 return;
899 dma_mark_clean(phys_to_virt(paddr), size);
902 void
903 swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
904 size_t size, enum dma_data_direction dir)
906 swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_CPU);
908 EXPORT_SYMBOL(swiotlb_sync_single_for_cpu);
910 void
911 swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
912 size_t size, enum dma_data_direction dir)
914 swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_DEVICE);
916 EXPORT_SYMBOL(swiotlb_sync_single_for_device);
919 * Map a set of buffers described by scatterlist in streaming mode for DMA.
920 * This is the scatter-gather version of the above swiotlb_map_page
921 * interface. Here the scatter gather list elements are each tagged with the
922 * appropriate dma address and length. They are obtained via
923 * sg_dma_{address,length}(SG).
925 * NOTE: An implementation may be able to use a smaller number of
926 * DMA address/length pairs than there are SG table elements.
927 * (for example via virtual mapping capabilities)
928 * The routine returns the number of addr/length pairs actually
929 * used, at most nents.
931 * Device ownership issues as mentioned above for swiotlb_map_page are the
932 * same here.
935 swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
936 enum dma_data_direction dir, unsigned long attrs)
938 struct scatterlist *sg;
939 int i;
941 BUG_ON(dir == DMA_NONE);
943 for_each_sg(sgl, sg, nelems, i) {
944 phys_addr_t paddr = sg_phys(sg);
945 dma_addr_t dev_addr = phys_to_dma(hwdev, paddr);
947 if (swiotlb_force == SWIOTLB_FORCE ||
948 !dma_capable(hwdev, dev_addr, sg->length)) {
949 phys_addr_t map = map_single(hwdev, sg_phys(sg),
950 sg->length, dir, attrs);
951 if (map == SWIOTLB_MAP_ERROR) {
952 /* Don't panic here, we expect map_sg users
953 to do proper error handling. */
954 swiotlb_full(hwdev, sg->length, dir, 0);
955 attrs |= DMA_ATTR_SKIP_CPU_SYNC;
956 swiotlb_unmap_sg_attrs(hwdev, sgl, i, dir,
957 attrs);
958 sg_dma_len(sgl) = 0;
959 return 0;
961 sg->dma_address = phys_to_dma(hwdev, map);
962 } else
963 sg->dma_address = dev_addr;
964 sg_dma_len(sg) = sg->length;
966 return nelems;
968 EXPORT_SYMBOL(swiotlb_map_sg_attrs);
971 * Unmap a set of streaming mode DMA translations. Again, cpu read rules
972 * concerning calls here are the same as for swiotlb_unmap_page() above.
974 void
975 swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
976 int nelems, enum dma_data_direction dir,
977 unsigned long attrs)
979 struct scatterlist *sg;
980 int i;
982 BUG_ON(dir == DMA_NONE);
984 for_each_sg(sgl, sg, nelems, i)
985 unmap_single(hwdev, sg->dma_address, sg_dma_len(sg), dir,
986 attrs);
988 EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);
991 * Make physical memory consistent for a set of streaming mode DMA translations
992 * after a transfer.
994 * The same as swiotlb_sync_single_* but for a scatter-gather list, same rules
995 * and usage.
997 static void
998 swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl,
999 int nelems, enum dma_data_direction dir,
1000 enum dma_sync_target target)
1002 struct scatterlist *sg;
1003 int i;
1005 for_each_sg(sgl, sg, nelems, i)
1006 swiotlb_sync_single(hwdev, sg->dma_address,
1007 sg_dma_len(sg), dir, target);
1010 void
1011 swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
1012 int nelems, enum dma_data_direction dir)
1014 swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_CPU);
1016 EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu);
1018 void
1019 swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
1020 int nelems, enum dma_data_direction dir)
1022 swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_DEVICE);
1024 EXPORT_SYMBOL(swiotlb_sync_sg_for_device);
1027 swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
1029 return (dma_addr == phys_to_dma(hwdev, io_tlb_overflow_buffer));
1031 EXPORT_SYMBOL(swiotlb_dma_mapping_error);
1034 * Return whether the given device DMA address mask can be supported
1035 * properly. For example, if your device can only drive the low 24-bits
1036 * during bus mastering, then you would pass 0x00ffffff as the mask to
1037 * this function.
1040 swiotlb_dma_supported(struct device *hwdev, u64 mask)
1042 return phys_to_dma(hwdev, io_tlb_end - 1) <= mask;
1044 EXPORT_SYMBOL(swiotlb_dma_supported);