drivers/scsi/53c700.h

   1 /* -*- mode: c; c-basic-offset: 8 -*- */
   2
   3 /* Driver for 53c700 and 53c700-66 chips from NCR and Symbios
   4  *
   5  * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
   6  */
   7
   8 #ifndef _53C700_H
   9 #define _53C700_H
  10
  11 #include <linux/interrupt.h>
  12 #include <asm/io.h>
  13
  14 #include <scsi/scsi_device.h>
  15 #include <scsi/scsi_cmnd.h>
  16
  17 /* Turn on for general debugging---too verbose for normal use */
  18 #undef  NCR_700_DEBUG
  19 /* Debug the tag queues, checking hash queue allocation and deallocation
  20  * and search for duplicate tags */
  21 #undef NCR_700_TAG_DEBUG
  22
  23 #ifdef NCR_700_DEBUG
  24 #define DEBUG(x)        printk x
  25 #define DDEBUG(prefix, sdev, fmt, a...) \
  26         sdev_printk(prefix, sdev, fmt, ##a)
  27 #define CDEBUG(prefix, scmd, fmt, a...) \
  28         scmd_printk(prefix, scmd, fmt, ##a)
  29 #else
  30 #define DEBUG(x)        do {} while (0)
  31 #define DDEBUG(prefix, scmd, fmt, a...) do {} while (0)
  32 #define CDEBUG(prefix, scmd, fmt, a...) do {} while (0)
  33 #endif
  34
  35 /* The number of available command slots */
  36 #define NCR_700_COMMAND_SLOTS_PER_HOST  64
  37 /* The maximum number of Scatter Gathers we allow */
  38 #define NCR_700_SG_SEGMENTS             32
  39 /* The maximum number of luns (make this of the form 2^n) */
  40 #define NCR_700_MAX_LUNS                32
  41 #define NCR_700_LUN_MASK                (NCR_700_MAX_LUNS - 1)
  42 /* Maximum number of tags the driver ever allows per device */
  43 #define NCR_700_MAX_TAGS                16
  44 /* Tag depth the driver starts out with (can be altered in sysfs) */
  45 #define NCR_700_DEFAULT_TAGS            4
  46 /* This is the default number of commands per LUN in the untagged case.
  47  * two is a good value because it means we can have one command active and
  48  * one command fully prepared and waiting
  49  */
  50 #define NCR_700_CMD_PER_LUN             2
  51 /* magic byte identifying an internally generated REQUEST_SENSE command */
  52 #define NCR_700_INTERNAL_SENSE_MAGIC    0x42
  53
  54 struct NCR_700_Host_Parameters;
  55
  56 /* These are the externally used routines */
  57 struct Scsi_Host *NCR_700_detect(struct scsi_host_template *,
  58                 struct NCR_700_Host_Parameters *, struct device *);
  59 int NCR_700_release(struct Scsi_Host *host);
  60 irqreturn_t NCR_700_intr(int, void *);
  61
  62
  63 enum NCR_700_Host_State {
  64         NCR_700_HOST_BUSY,
  65         NCR_700_HOST_FREE,
  66 };
  67
  68 struct NCR_700_SG_List {
  69         /* The following is a script fragment to move the buffer onto the
  70          * bus and then link the next fragment or return */
  71         #define SCRIPT_MOVE_DATA_IN             0x09000000
  72         #define SCRIPT_MOVE_DATA_OUT            0x08000000
  73         __u32   ins;
  74         __u32   pAddr;
  75         #define SCRIPT_NOP                      0x80000000
  76         #define SCRIPT_RETURN                   0x90080000
  77 };
  78
  79 struct NCR_700_Device_Parameters {
  80         /* space for creating a request sense command. Really, except
  81          * for the annoying SCSI-2 requirement for LUN information in
  82          * cmnd[1], this could be in static storage */
  83         unsigned char cmnd[MAX_COMMAND_SIZE];
  84         __u8    depth;
  85         struct scsi_cmnd *current_cmnd; /* currently active command */
  86 };
  87
  88
  89 /* The SYNC negotiation sequence looks like:
  90  *
  91  * If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the
  92  * initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION
  93  * If we get an SDTR reply, work out the SXFER parameters, squirrel
  94  * them away here, clear DEV_BEGIN_SYNC_NEGOTIATION and set
  95  * DEV_NEGOTIATED_SYNC.  If we get a REJECT msg, squirrel
  96  *
  97  *
  98  * 0:7  SXFER_REG negotiated value for this device
  99  * 8:15 Current queue depth
 100  * 16   negotiated SYNC flag
 101  * 17 begin SYNC negotiation flag
 102  * 18 device supports tag queueing */
 103 #define NCR_700_DEV_NEGOTIATED_SYNC     (1<<16)
 104 #define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION      (1<<17)
 105 #define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19)
 106
 107 static inline char *NCR_700_get_sense_cmnd(struct scsi_device *SDp)
 108 {
 109         struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
 110
 111         return hostdata->cmnd;
 112 }
 113
 114 static inline void
 115 NCR_700_set_depth(struct scsi_device *SDp, __u8 depth)
 116 {
 117         struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
 118
 119         hostdata->depth = depth;
 120 }
 121 static inline __u8
 122 NCR_700_get_depth(struct scsi_device *SDp)
 123 {
 124         struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
 125
 126         return hostdata->depth;
 127 }
 128 static inline int
 129 NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag)
 130 {
 131         return (spi_flags(SDp->sdev_target) & flag) == flag;
 132 }
 133 static inline int
 134 NCR_700_is_flag_clear(struct scsi_device *SDp, __u32 flag)
 135 {
 136         return (spi_flags(SDp->sdev_target) & flag) == 0;
 137 }
 138 static inline void
 139 NCR_700_set_flag(struct scsi_device *SDp, __u32 flag)
 140 {
 141         spi_flags(SDp->sdev_target) |= flag;
 142 }
 143 static inline void
 144 NCR_700_clear_flag(struct scsi_device *SDp, __u32 flag)
 145 {
 146         spi_flags(SDp->sdev_target) &= ~flag;
 147 }
 148
 149 enum NCR_700_tag_neg_state {
 150         NCR_700_START_TAG_NEGOTIATION = 0,
 151         NCR_700_DURING_TAG_NEGOTIATION = 1,
 152         NCR_700_FINISHED_TAG_NEGOTIATION = 2,
 153 };
 154
 155 static inline enum NCR_700_tag_neg_state
 156 NCR_700_get_tag_neg_state(struct scsi_device *SDp)
 157 {
 158         return (enum NCR_700_tag_neg_state)((spi_flags(SDp->sdev_target)>>20) & 0x3);
 159 }
 160
 161 static inline void
 162 NCR_700_set_tag_neg_state(struct scsi_device *SDp,
 163                           enum NCR_700_tag_neg_state state)
 164 {
 165         /* clear the slot */
 166         spi_flags(SDp->sdev_target) &= ~(0x3 << 20);
 167         spi_flags(SDp->sdev_target) |= ((__u32)state) << 20;
 168 }
 169
 170 struct NCR_700_command_slot {
 171         struct NCR_700_SG_List  SG[NCR_700_SG_SEGMENTS+1];
 172         struct NCR_700_SG_List  *pSG;
 173         #define NCR_700_SLOT_MASK 0xFC
 174         #define NCR_700_SLOT_MAGIC 0xb8
 175         #define NCR_700_SLOT_FREE (0|NCR_700_SLOT_MAGIC) /* slot may be used */
 176         #define NCR_700_SLOT_BUSY (1|NCR_700_SLOT_MAGIC) /* slot has command active on HA */
 177         #define NCR_700_SLOT_QUEUED (2|NCR_700_SLOT_MAGIC) /* slot has command to be made active on HA */
 178         __u8    state;
 179         #define NCR_700_FLAG_AUTOSENSE  0x01
 180         __u8    flags;
 181         __u8    pad1[2];        /* Needed for m68k where min alignment is 2 bytes */
 182         int     tag;
 183         __u32   resume_offset;
 184         struct scsi_cmnd *cmnd;
 185         /* The pci_mapped address of the actual command in cmnd */
 186         dma_addr_t      pCmd;
 187         __u32           temp;
 188         /* if this command is a pci_single mapping, holds the dma address
 189          * for later unmapping in the done routine */
 190         dma_addr_t      dma_handle;
 191         /* historical remnant, now used to link free commands */
 192         struct NCR_700_command_slot *ITL_forw;
 193 };
 194
 195 struct NCR_700_Host_Parameters {
 196         /* These must be filled in by the calling driver */
 197         int     clock;                  /* board clock speed in MHz */
 198         void __iomem    *base;          /* the base for the port (copied to host) */
 199         struct device   *dev;
 200         __u32   dmode_extra;    /* adjustable bus settings */
 201         __u32   dcntl_extra;    /* adjustable bus settings */
 202         __u32   ctest7_extra;   /* adjustable bus settings */
 203         __u32   differential:1; /* if we are differential */
 204 #ifdef CONFIG_53C700_LE_ON_BE
 205         /* This option is for HP only.  Set it if your chip is wired for
 206          * little endian on this platform (which is big endian) */
 207         __u32   force_le_on_be:1;
 208 #endif
 209         __u32   chip710:1;      /* set if really a 710 not 700 */
 210         __u32   burst_length:4; /* set to 0 to disable 710 bursting */
 211
 212         /* NOTHING BELOW HERE NEEDS ALTERING */
 213         __u32   fast:1;         /* if we can alter the SCSI bus clock
 214                                    speed (so can negiotiate sync) */
 215         int     sync_clock;     /* The speed of the SYNC core */
 216
 217         __u32   *script;                /* pointer to script location */
 218         __u32   pScript;                /* physical mem addr of script */
 219
 220         enum NCR_700_Host_State state; /* protected by state lock */
 221         struct scsi_cmnd *cmd;
 222         /* Note: pScript contains the single consistent block of
 223          * memory.  All the msgin, msgout and status are allocated in
 224          * this memory too (at separate cache lines).  TOTAL_MEM_SIZE
 225          * represents the total size of this area */
 226 #define MSG_ARRAY_SIZE  8
 227 #define MSGOUT_OFFSET   (L1_CACHE_ALIGN(sizeof(SCRIPT)))
 228         __u8    *msgout;
 229 #define MSGIN_OFFSET    (MSGOUT_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
 230         __u8    *msgin;
 231 #define STATUS_OFFSET   (MSGIN_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
 232         __u8    *status;
 233 #define SLOTS_OFFSET    (STATUS_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
 234         struct NCR_700_command_slot     *slots;
 235 #define TOTAL_MEM_SIZE  (SLOTS_OFFSET + L1_CACHE_ALIGN(sizeof(struct NCR_700_command_slot) * NCR_700_COMMAND_SLOTS_PER_HOST))
 236         int     saved_slot_position;
 237         int     command_slot_count; /* protected by state lock */
 238         __u8    tag_negotiated;
 239         __u8    rev;
 240         __u8    reselection_id;
 241         __u8    min_period;
 242
 243         /* Free list, singly linked by ITL_forw elements */
 244         struct NCR_700_command_slot *free_list;
 245         /* Completion for waited for ops, like reset, abort or
 246          * device reset.
 247          *
 248          * NOTE: relies on single threading in the error handler to
 249          * have only one outstanding at once */
 250         struct completion *eh_complete;
 251 };
 252
 253 /*
 254  *      53C700 Register Interface - the offset from the Selected base
 255  *      I/O address */
 256 #ifdef CONFIG_53C700_LE_ON_BE
 257 #define bE      (hostdata->force_le_on_be ? 0 : 3)
 258 #define bSWAP   (hostdata->force_le_on_be)
 259 #define bEBus   (!hostdata->force_le_on_be)
 260 #elif defined(__BIG_ENDIAN)
 261 #define bE      3
 262 #define bSWAP   0
 263 #elif defined(__LITTLE_ENDIAN)
 264 #define bE      0
 265 #define bSWAP   0
 266 #else
 267 #error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?"
 268 #endif
 269 #ifndef bEBus
 270 #ifdef CONFIG_53C700_BE_BUS
 271 #define bEBus   1
 272 #else
 273 #define bEBus   0
 274 #endif
 275 #endif
 276 #define bS_to_cpu(x)    (bSWAP ? le32_to_cpu(x) : (x))
 277 #define bS_to_host(x)   (bSWAP ? cpu_to_le32(x) : (x))
 278
 279 /* NOTE: These registers are in the LE register space only, the required byte
 280  * swapping is done by the NCR_700_{read|write}[b] functions */
 281 #define SCNTL0_REG                      0x00
 282 #define         FULL_ARBITRATION        0xc0
 283 #define         PARITY                  0x08
 284 #define         ENABLE_PARITY           0x04
 285 #define         AUTO_ATN                0x02
 286 #define SCNTL1_REG                      0x01
 287 #define         SLOW_BUS                0x80
 288 #define         ENABLE_SELECT           0x20
 289 #define         ASSERT_RST              0x08
 290 #define         ASSERT_EVEN_PARITY      0x04
 291 #define SDID_REG                        0x02
 292 #define SIEN_REG                        0x03
 293 #define         PHASE_MM_INT            0x80
 294 #define         FUNC_COMP_INT           0x40
 295 #define         SEL_TIMEOUT_INT         0x20
 296 #define         SELECT_INT              0x10
 297 #define         GROSS_ERR_INT           0x08
 298 #define         UX_DISC_INT             0x04
 299 #define         RST_INT                 0x02
 300 #define         PAR_ERR_INT             0x01
 301 #define SCID_REG                        0x04
 302 #define SXFER_REG                       0x05
 303 #define         ASYNC_OPERATION         0x00
 304 #define SODL_REG                        0x06
 305 #define SOCL_REG                        0x07
 306 #define SFBR_REG                        0x08
 307 #define SIDL_REG                        0x09
 308 #define SBDL_REG                        0x0A
 309 #define SBCL_REG                        0x0B
 310 /* read bits */
 311 #define         SBCL_IO                 0x01
 312 /*write bits */
 313 #define         SYNC_DIV_AS_ASYNC       0x00
 314 #define         SYNC_DIV_1_0            0x01
 315 #define         SYNC_DIV_1_5            0x02
 316 #define         SYNC_DIV_2_0            0x03
 317 #define DSTAT_REG                       0x0C
 318 #define         ILGL_INST_DETECTED      0x01
 319 #define         WATCH_DOG_INTERRUPT     0x02
 320 #define         SCRIPT_INT_RECEIVED     0x04
 321 #define         ABORTED                 0x10
 322 #define SSTAT0_REG                      0x0D
 323 #define         PARITY_ERROR            0x01
 324 #define         SCSI_RESET_DETECTED     0x02
 325 #define         UNEXPECTED_DISCONNECT   0x04
 326 #define         SCSI_GROSS_ERROR        0x08
 327 #define         SELECTED                0x10
 328 #define         SELECTION_TIMEOUT       0x20
 329 #define         FUNCTION_COMPLETE       0x40
 330 #define         PHASE_MISMATCH          0x80
 331 #define SSTAT1_REG                      0x0E
 332 #define         SIDL_REG_FULL           0x80
 333 #define         SODR_REG_FULL           0x40
 334 #define         SODL_REG_FULL           0x20
 335 #define SSTAT2_REG                      0x0F
 336 #define CTEST0_REG                      0x14
 337 #define         BTB_TIMER_DISABLE       0x40
 338 #define CTEST1_REG                      0x15
 339 #define CTEST2_REG                      0x16
 340 #define CTEST3_REG                      0x17
 341 #define CTEST4_REG                      0x18
 342 #define         DISABLE_FIFO            0x00
 343 #define         SLBE                    0x10
 344 #define         SFWR                    0x08
 345 #define         BYTE_LANE0              0x04
 346 #define         BYTE_LANE1              0x05
 347 #define         BYTE_LANE2              0x06
 348 #define         BYTE_LANE3              0x07
 349 #define         SCSI_ZMODE              0x20
 350 #define         ZMODE                   0x40
 351 #define CTEST5_REG                      0x19
 352 #define         MASTER_CONTROL          0x10
 353 #define         DMA_DIRECTION           0x08
 354 #define CTEST7_REG                      0x1B
 355 #define         BURST_DISABLE           0x80 /* 710 only */
 356 #define         SEL_TIMEOUT_DISABLE     0x10 /* 710 only */
 357 #define         DFP                     0x08
 358 #define         EVP                     0x04
 359 #define         CTEST7_TT1              0x02
 360 #define         DIFF                    0x01
 361 #define CTEST6_REG                      0x1A
 362 #define TEMP_REG                        0x1C
 363 #define DFIFO_REG                       0x20
 364 #define         FLUSH_DMA_FIFO          0x80
 365 #define         CLR_FIFO                0x40
 366 #define ISTAT_REG                       0x21
 367 #define         ABORT_OPERATION         0x80
 368 #define         SOFTWARE_RESET_710      0x40
 369 #define         DMA_INT_PENDING         0x01
 370 #define         SCSI_INT_PENDING        0x02
 371 #define         CONNECTED               0x08
 372 #define CTEST8_REG                      0x22
 373 #define         LAST_DIS_ENBL           0x01
 374 #define         SHORTEN_FILTERING       0x04
 375 #define         ENABLE_ACTIVE_NEGATION  0x10
 376 #define         GENERATE_RECEIVE_PARITY 0x20
 377 #define         CLR_FIFO_710            0x04
 378 #define         FLUSH_DMA_FIFO_710      0x08
 379 #define CTEST9_REG                      0x23
 380 #define DBC_REG                         0x24
 381 #define DCMD_REG                        0x27
 382 #define DNAD_REG                        0x28
 383 #define DIEN_REG                        0x39
 384 #define         BUS_FAULT               0x20
 385 #define         ABORT_INT               0x10
 386 #define         INT_INST_INT            0x04
 387 #define         WD_INT                  0x02
 388 #define         ILGL_INST_INT           0x01
 389 #define DCNTL_REG                       0x3B
 390 #define         SOFTWARE_RESET          0x01
 391 #define         COMPAT_700_MODE         0x01
 392 #define         SCRPTS_16BITS           0x20
 393 #define         EA_710                  0x20
 394 #define         ASYNC_DIV_2_0           0x00
 395 #define         ASYNC_DIV_1_5           0x40
 396 #define         ASYNC_DIV_1_0           0x80
 397 #define         ASYNC_DIV_3_0           0xc0
 398 #define DMODE_710_REG                   0x38
 399 #define DMODE_700_REG                   0x34
 400 #define         BURST_LENGTH_1          0x00
 401 #define         BURST_LENGTH_2          0x40
 402 #define         BURST_LENGTH_4          0x80
 403 #define         BURST_LENGTH_8          0xC0
 404 #define         DMODE_FC1               0x10
 405 #define         DMODE_FC2               0x20
 406 #define         BW16                    32
 407 #define         MODE_286                16
 408 #define         IO_XFER                 8
 409 #define         FIXED_ADDR              4
 410
 411 #define DSP_REG                         0x2C
 412 #define DSPS_REG                        0x30
 413
 414 /* Parameters to begin SDTR negotiations.  Empirically, I find that
 415  * the 53c700-66 cannot handle an offset >8, so don't change this  */
 416 #define NCR_700_MAX_OFFSET      8
 417 /* Was hoping the max offset would be greater for the 710, but
 418  * empirically it seems to be 8 also */
 419 #define NCR_710_MAX_OFFSET      8
 420 #define NCR_700_MIN_XFERP       1
 421 #define NCR_710_MIN_XFERP       0
 422 #define NCR_700_MIN_PERIOD      25 /* for SDTR message, 100ns */
 423
 424 #define script_patch_32(dev, script, symbol, value) \
 425 { \
 426         int i; \
 427         dma_addr_t da = value; \
 428         for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
 429                 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]) + da; \
 430                 (script)[A_##symbol##_used[i]] = bS_to_host(val); \
 431                 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
 432                 DEBUG((" script, patching %s at %d to %pad\n", \
 433                        #symbol, A_##symbol##_used[i], &da)); \
 434         } \
 435 }
 436
 437 #define script_patch_32_abs(dev, script, symbol, value) \
 438 { \
 439         int i; \
 440         dma_addr_t da = value; \
 441         for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
 442                 (script)[A_##symbol##_used[i]] = bS_to_host(da); \
 443                 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
 444                 DEBUG((" script, patching %s at %d to %pad\n", \
 445                        #symbol, A_##symbol##_used[i], &da)); \
 446         } \
 447 }
 448
 449 /* Used for patching the SCSI ID in the SELECT instruction */
 450 #define script_patch_ID(dev, script, symbol, value) \
 451 { \
 452         int i; \
 453         for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
 454                 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \
 455                 val &= 0xff00ffff; \
 456                 val |= ((value) & 0xff) << 16; \
 457                 (script)[A_##symbol##_used[i]] = bS_to_host(val); \
 458                 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
 459                 DEBUG((" script, patching ID field %s at %d to 0x%x\n", \
 460                        #symbol, A_##symbol##_used[i], val)); \
 461         } \
 462 }
 463
 464 #define script_patch_16(dev, script, symbol, value) \
 465 { \
 466         int i; \
 467         for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
 468                 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \
 469                 val &= 0xffff0000; \
 470                 val |= ((value) & 0xffff); \
 471                 (script)[A_##symbol##_used[i]] = bS_to_host(val); \
 472                 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
 473                 DEBUG((" script, patching short field %s at %d to 0x%x\n", \
 474                        #symbol, A_##symbol##_used[i], val)); \
 475         } \
 476 }
 477
 478
 479 static inline __u8
 480 NCR_700_readb(struct Scsi_Host *host, __u32 reg)
 481 {
 482         const struct NCR_700_Host_Parameters *hostdata
 483                 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
 484
 485         return ioread8(hostdata->base + (reg^bE));
 486 }
 487
 488 static inline __u32
 489 NCR_700_readl(struct Scsi_Host *host, __u32 reg)
 490 {
 491         const struct NCR_700_Host_Parameters *hostdata
 492                 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
 493         __u32 value = bEBus ? ioread32be(hostdata->base + reg) :
 494                 ioread32(hostdata->base + reg);
 495 #if 1
 496         /* sanity check the register */
 497         BUG_ON((reg & 0x3) != 0);
 498 #endif
 499
 500         return value;
 501 }
 502
 503 static inline void
 504 NCR_700_writeb(__u8 value, struct Scsi_Host *host, __u32 reg)
 505 {
 506         const struct NCR_700_Host_Parameters *hostdata
 507                 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
 508
 509         iowrite8(value, hostdata->base + (reg^bE));
 510 }
 511
 512 static inline void
 513 NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg)
 514 {
 515         const struct NCR_700_Host_Parameters *hostdata
 516                 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
 517
 518 #if 1
 519         /* sanity check the register */
 520         BUG_ON((reg & 0x3) != 0);
 521 #endif
 522
 523         bEBus ? iowrite32be(value, hostdata->base + reg):
 524                 iowrite32(value, hostdata->base + reg);
 525 }
 526
 527 #endif