io_uring: don't count rqs failed after current one
[linux/fpc-iii.git] / drivers / counter / stm32-lptimer-cnt.c
blob8e276eb655f58c617f204c3f5558af76bfb1081d
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * STM32 Low-Power Timer Encoder and Counter driver
5 * Copyright (C) STMicroelectronics 2017
7 * Author: Fabrice Gasnier <fabrice.gasnier@st.com>
9 * Inspired by 104-quad-8 and stm32-timer-trigger drivers.
13 #include <linux/bitfield.h>
14 #include <linux/counter.h>
15 #include <linux/iio/iio.h>
16 #include <linux/mfd/stm32-lptimer.h>
17 #include <linux/module.h>
18 #include <linux/pinctrl/consumer.h>
19 #include <linux/platform_device.h>
21 struct stm32_lptim_cnt {
22 struct counter_device counter;
23 struct device *dev;
24 struct regmap *regmap;
25 struct clk *clk;
26 u32 ceiling;
27 u32 polarity;
28 u32 quadrature_mode;
29 bool enabled;
32 static int stm32_lptim_is_enabled(struct stm32_lptim_cnt *priv)
34 u32 val;
35 int ret;
37 ret = regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
38 if (ret)
39 return ret;
41 return FIELD_GET(STM32_LPTIM_ENABLE, val);
44 static int stm32_lptim_set_enable_state(struct stm32_lptim_cnt *priv,
45 int enable)
47 int ret;
48 u32 val;
50 val = FIELD_PREP(STM32_LPTIM_ENABLE, enable);
51 ret = regmap_write(priv->regmap, STM32_LPTIM_CR, val);
52 if (ret)
53 return ret;
55 if (!enable) {
56 clk_disable(priv->clk);
57 priv->enabled = false;
58 return 0;
61 /* LP timer must be enabled before writing CMP & ARR */
62 ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, priv->ceiling);
63 if (ret)
64 return ret;
66 ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, 0);
67 if (ret)
68 return ret;
70 /* ensure CMP & ARR registers are properly written */
71 ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
72 (val & STM32_LPTIM_CMPOK_ARROK),
73 100, 1000);
74 if (ret)
75 return ret;
77 ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
78 STM32_LPTIM_CMPOKCF_ARROKCF);
79 if (ret)
80 return ret;
82 ret = clk_enable(priv->clk);
83 if (ret) {
84 regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
85 return ret;
87 priv->enabled = true;
89 /* Start LP timer in continuous mode */
90 return regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
91 STM32_LPTIM_CNTSTRT, STM32_LPTIM_CNTSTRT);
94 static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
96 u32 mask = STM32_LPTIM_ENC | STM32_LPTIM_COUNTMODE |
97 STM32_LPTIM_CKPOL | STM32_LPTIM_PRESC;
98 u32 val;
100 /* Setup LP timer encoder/counter and polarity, without prescaler */
101 if (priv->quadrature_mode)
102 val = enable ? STM32_LPTIM_ENC : 0;
103 else
104 val = enable ? STM32_LPTIM_COUNTMODE : 0;
105 val |= FIELD_PREP(STM32_LPTIM_CKPOL, enable ? priv->polarity : 0);
107 return regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask, val);
110 static int stm32_lptim_write_raw(struct iio_dev *indio_dev,
111 struct iio_chan_spec const *chan,
112 int val, int val2, long mask)
114 struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
115 int ret;
117 switch (mask) {
118 case IIO_CHAN_INFO_ENABLE:
119 if (val < 0 || val > 1)
120 return -EINVAL;
122 /* Check nobody uses the timer, or already disabled/enabled */
123 ret = stm32_lptim_is_enabled(priv);
124 if ((ret < 0) || (!ret && !val))
125 return ret;
126 if (val && ret)
127 return -EBUSY;
129 ret = stm32_lptim_setup(priv, val);
130 if (ret)
131 return ret;
132 return stm32_lptim_set_enable_state(priv, val);
134 default:
135 return -EINVAL;
139 static int stm32_lptim_read_raw(struct iio_dev *indio_dev,
140 struct iio_chan_spec const *chan,
141 int *val, int *val2, long mask)
143 struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
144 u32 dat;
145 int ret;
147 switch (mask) {
148 case IIO_CHAN_INFO_RAW:
149 ret = regmap_read(priv->regmap, STM32_LPTIM_CNT, &dat);
150 if (ret)
151 return ret;
152 *val = dat;
153 return IIO_VAL_INT;
155 case IIO_CHAN_INFO_ENABLE:
156 ret = stm32_lptim_is_enabled(priv);
157 if (ret < 0)
158 return ret;
159 *val = ret;
160 return IIO_VAL_INT;
162 case IIO_CHAN_INFO_SCALE:
163 /* Non-quadrature mode: scale = 1 */
164 *val = 1;
165 *val2 = 0;
166 if (priv->quadrature_mode) {
168 * Quadrature encoder mode:
169 * - both edges, quarter cycle, scale is 0.25
170 * - either rising/falling edge scale is 0.5
172 if (priv->polarity > 1)
173 *val2 = 2;
174 else
175 *val2 = 1;
177 return IIO_VAL_FRACTIONAL_LOG2;
179 default:
180 return -EINVAL;
184 static const struct iio_info stm32_lptim_cnt_iio_info = {
185 .read_raw = stm32_lptim_read_raw,
186 .write_raw = stm32_lptim_write_raw,
189 static const char *const stm32_lptim_quadrature_modes[] = {
190 "non-quadrature",
191 "quadrature",
194 static int stm32_lptim_get_quadrature_mode(struct iio_dev *indio_dev,
195 const struct iio_chan_spec *chan)
197 struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
199 return priv->quadrature_mode;
202 static int stm32_lptim_set_quadrature_mode(struct iio_dev *indio_dev,
203 const struct iio_chan_spec *chan,
204 unsigned int type)
206 struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
208 if (stm32_lptim_is_enabled(priv))
209 return -EBUSY;
211 priv->quadrature_mode = type;
213 return 0;
216 static const struct iio_enum stm32_lptim_quadrature_mode_en = {
217 .items = stm32_lptim_quadrature_modes,
218 .num_items = ARRAY_SIZE(stm32_lptim_quadrature_modes),
219 .get = stm32_lptim_get_quadrature_mode,
220 .set = stm32_lptim_set_quadrature_mode,
223 static const char * const stm32_lptim_cnt_polarity[] = {
224 "rising-edge", "falling-edge", "both-edges",
227 static int stm32_lptim_cnt_get_polarity(struct iio_dev *indio_dev,
228 const struct iio_chan_spec *chan)
230 struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
232 return priv->polarity;
235 static int stm32_lptim_cnt_set_polarity(struct iio_dev *indio_dev,
236 const struct iio_chan_spec *chan,
237 unsigned int type)
239 struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
241 if (stm32_lptim_is_enabled(priv))
242 return -EBUSY;
244 priv->polarity = type;
246 return 0;
249 static const struct iio_enum stm32_lptim_cnt_polarity_en = {
250 .items = stm32_lptim_cnt_polarity,
251 .num_items = ARRAY_SIZE(stm32_lptim_cnt_polarity),
252 .get = stm32_lptim_cnt_get_polarity,
253 .set = stm32_lptim_cnt_set_polarity,
256 static ssize_t stm32_lptim_cnt_get_ceiling(struct stm32_lptim_cnt *priv,
257 char *buf)
259 return snprintf(buf, PAGE_SIZE, "%u\n", priv->ceiling);
262 static ssize_t stm32_lptim_cnt_set_ceiling(struct stm32_lptim_cnt *priv,
263 const char *buf, size_t len)
265 int ret;
267 if (stm32_lptim_is_enabled(priv))
268 return -EBUSY;
270 ret = kstrtouint(buf, 0, &priv->ceiling);
271 if (ret)
272 return ret;
274 if (priv->ceiling > STM32_LPTIM_MAX_ARR)
275 return -EINVAL;
277 return len;
280 static ssize_t stm32_lptim_cnt_get_preset_iio(struct iio_dev *indio_dev,
281 uintptr_t private,
282 const struct iio_chan_spec *chan,
283 char *buf)
285 struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
287 return stm32_lptim_cnt_get_ceiling(priv, buf);
290 static ssize_t stm32_lptim_cnt_set_preset_iio(struct iio_dev *indio_dev,
291 uintptr_t private,
292 const struct iio_chan_spec *chan,
293 const char *buf, size_t len)
295 struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
297 return stm32_lptim_cnt_set_ceiling(priv, buf, len);
300 /* LP timer with encoder */
301 static const struct iio_chan_spec_ext_info stm32_lptim_enc_ext_info[] = {
303 .name = "preset",
304 .shared = IIO_SEPARATE,
305 .read = stm32_lptim_cnt_get_preset_iio,
306 .write = stm32_lptim_cnt_set_preset_iio,
308 IIO_ENUM("polarity", IIO_SEPARATE, &stm32_lptim_cnt_polarity_en),
309 IIO_ENUM_AVAILABLE("polarity", &stm32_lptim_cnt_polarity_en),
310 IIO_ENUM("quadrature_mode", IIO_SEPARATE,
311 &stm32_lptim_quadrature_mode_en),
312 IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_lptim_quadrature_mode_en),
316 static const struct iio_chan_spec stm32_lptim_enc_channels = {
317 .type = IIO_COUNT,
318 .channel = 0,
319 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
320 BIT(IIO_CHAN_INFO_ENABLE) |
321 BIT(IIO_CHAN_INFO_SCALE),
322 .ext_info = stm32_lptim_enc_ext_info,
323 .indexed = 1,
326 /* LP timer without encoder (counter only) */
327 static const struct iio_chan_spec_ext_info stm32_lptim_cnt_ext_info[] = {
329 .name = "preset",
330 .shared = IIO_SEPARATE,
331 .read = stm32_lptim_cnt_get_preset_iio,
332 .write = stm32_lptim_cnt_set_preset_iio,
334 IIO_ENUM("polarity", IIO_SEPARATE, &stm32_lptim_cnt_polarity_en),
335 IIO_ENUM_AVAILABLE("polarity", &stm32_lptim_cnt_polarity_en),
339 static const struct iio_chan_spec stm32_lptim_cnt_channels = {
340 .type = IIO_COUNT,
341 .channel = 0,
342 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
343 BIT(IIO_CHAN_INFO_ENABLE) |
344 BIT(IIO_CHAN_INFO_SCALE),
345 .ext_info = stm32_lptim_cnt_ext_info,
346 .indexed = 1,
350 * enum stm32_lptim_cnt_function - enumerates LPTimer counter & encoder modes
351 * @STM32_LPTIM_COUNTER_INCREASE: up count on IN1 rising, falling or both edges
352 * @STM32_LPTIM_ENCODER_BOTH_EDGE: count on both edges (IN1 & IN2 quadrature)
354 enum stm32_lptim_cnt_function {
355 STM32_LPTIM_COUNTER_INCREASE,
356 STM32_LPTIM_ENCODER_BOTH_EDGE,
359 static enum counter_count_function stm32_lptim_cnt_functions[] = {
360 [STM32_LPTIM_COUNTER_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
361 [STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
364 enum stm32_lptim_synapse_action {
365 STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE,
366 STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE,
367 STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES,
368 STM32_LPTIM_SYNAPSE_ACTION_NONE,
371 static enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
372 /* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */
373 [STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
374 [STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
375 [STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
376 [STM32_LPTIM_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
379 static int stm32_lptim_cnt_read(struct counter_device *counter,
380 struct counter_count *count, unsigned long *val)
382 struct stm32_lptim_cnt *const priv = counter->priv;
383 u32 cnt;
384 int ret;
386 ret = regmap_read(priv->regmap, STM32_LPTIM_CNT, &cnt);
387 if (ret)
388 return ret;
390 *val = cnt;
392 return 0;
395 static int stm32_lptim_cnt_function_get(struct counter_device *counter,
396 struct counter_count *count,
397 size_t *function)
399 struct stm32_lptim_cnt *const priv = counter->priv;
401 if (!priv->quadrature_mode) {
402 *function = STM32_LPTIM_COUNTER_INCREASE;
403 return 0;
406 if (priv->polarity == STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES) {
407 *function = STM32_LPTIM_ENCODER_BOTH_EDGE;
408 return 0;
411 return -EINVAL;
414 static int stm32_lptim_cnt_function_set(struct counter_device *counter,
415 struct counter_count *count,
416 size_t function)
418 struct stm32_lptim_cnt *const priv = counter->priv;
420 if (stm32_lptim_is_enabled(priv))
421 return -EBUSY;
423 switch (function) {
424 case STM32_LPTIM_COUNTER_INCREASE:
425 priv->quadrature_mode = 0;
426 return 0;
427 case STM32_LPTIM_ENCODER_BOTH_EDGE:
428 priv->quadrature_mode = 1;
429 priv->polarity = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES;
430 return 0;
433 return -EINVAL;
436 static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
437 struct counter_count *count,
438 void *private, char *buf)
440 struct stm32_lptim_cnt *const priv = counter->priv;
441 int ret;
443 ret = stm32_lptim_is_enabled(priv);
444 if (ret < 0)
445 return ret;
447 return scnprintf(buf, PAGE_SIZE, "%u\n", ret);
450 static ssize_t stm32_lptim_cnt_enable_write(struct counter_device *counter,
451 struct counter_count *count,
452 void *private,
453 const char *buf, size_t len)
455 struct stm32_lptim_cnt *const priv = counter->priv;
456 bool enable;
457 int ret;
459 ret = kstrtobool(buf, &enable);
460 if (ret)
461 return ret;
463 /* Check nobody uses the timer, or already disabled/enabled */
464 ret = stm32_lptim_is_enabled(priv);
465 if ((ret < 0) || (!ret && !enable))
466 return ret;
467 if (enable && ret)
468 return -EBUSY;
470 ret = stm32_lptim_setup(priv, enable);
471 if (ret)
472 return ret;
474 ret = stm32_lptim_set_enable_state(priv, enable);
475 if (ret)
476 return ret;
478 return len;
481 static ssize_t stm32_lptim_cnt_ceiling_read(struct counter_device *counter,
482 struct counter_count *count,
483 void *private, char *buf)
485 struct stm32_lptim_cnt *const priv = counter->priv;
487 return stm32_lptim_cnt_get_ceiling(priv, buf);
490 static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
491 struct counter_count *count,
492 void *private,
493 const char *buf, size_t len)
495 struct stm32_lptim_cnt *const priv = counter->priv;
497 return stm32_lptim_cnt_set_ceiling(priv, buf, len);
500 static const struct counter_count_ext stm32_lptim_cnt_ext[] = {
502 .name = "enable",
503 .read = stm32_lptim_cnt_enable_read,
504 .write = stm32_lptim_cnt_enable_write
507 .name = "ceiling",
508 .read = stm32_lptim_cnt_ceiling_read,
509 .write = stm32_lptim_cnt_ceiling_write
513 static int stm32_lptim_cnt_action_get(struct counter_device *counter,
514 struct counter_count *count,
515 struct counter_synapse *synapse,
516 size_t *action)
518 struct stm32_lptim_cnt *const priv = counter->priv;
519 size_t function;
520 int err;
522 err = stm32_lptim_cnt_function_get(counter, count, &function);
523 if (err)
524 return err;
526 switch (function) {
527 case STM32_LPTIM_COUNTER_INCREASE:
528 /* LP Timer acts as up-counter on input 1 */
529 if (synapse->signal->id == count->synapses[0].signal->id)
530 *action = priv->polarity;
531 else
532 *action = STM32_LPTIM_SYNAPSE_ACTION_NONE;
533 return 0;
534 case STM32_LPTIM_ENCODER_BOTH_EDGE:
535 *action = priv->polarity;
536 return 0;
539 return -EINVAL;
542 static int stm32_lptim_cnt_action_set(struct counter_device *counter,
543 struct counter_count *count,
544 struct counter_synapse *synapse,
545 size_t action)
547 struct stm32_lptim_cnt *const priv = counter->priv;
548 size_t function;
549 int err;
551 if (stm32_lptim_is_enabled(priv))
552 return -EBUSY;
554 err = stm32_lptim_cnt_function_get(counter, count, &function);
555 if (err)
556 return err;
558 /* only set polarity when in counter mode (on input 1) */
559 if (function == STM32_LPTIM_COUNTER_INCREASE
560 && synapse->signal->id == count->synapses[0].signal->id) {
561 switch (action) {
562 case STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE:
563 case STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE:
564 case STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES:
565 priv->polarity = action;
566 return 0;
570 return -EINVAL;
573 static const struct counter_ops stm32_lptim_cnt_ops = {
574 .count_read = stm32_lptim_cnt_read,
575 .function_get = stm32_lptim_cnt_function_get,
576 .function_set = stm32_lptim_cnt_function_set,
577 .action_get = stm32_lptim_cnt_action_get,
578 .action_set = stm32_lptim_cnt_action_set,
581 static struct counter_signal stm32_lptim_cnt_signals[] = {
583 .id = 0,
584 .name = "Channel 1 Quadrature A"
587 .id = 1,
588 .name = "Channel 1 Quadrature B"
592 static struct counter_synapse stm32_lptim_cnt_synapses[] = {
594 .actions_list = stm32_lptim_cnt_synapse_actions,
595 .num_actions = ARRAY_SIZE(stm32_lptim_cnt_synapse_actions),
596 .signal = &stm32_lptim_cnt_signals[0]
599 .actions_list = stm32_lptim_cnt_synapse_actions,
600 .num_actions = ARRAY_SIZE(stm32_lptim_cnt_synapse_actions),
601 .signal = &stm32_lptim_cnt_signals[1]
605 /* LP timer with encoder */
606 static struct counter_count stm32_lptim_enc_counts = {
607 .id = 0,
608 .name = "LPTimer Count",
609 .functions_list = stm32_lptim_cnt_functions,
610 .num_functions = ARRAY_SIZE(stm32_lptim_cnt_functions),
611 .synapses = stm32_lptim_cnt_synapses,
612 .num_synapses = ARRAY_SIZE(stm32_lptim_cnt_synapses),
613 .ext = stm32_lptim_cnt_ext,
614 .num_ext = ARRAY_SIZE(stm32_lptim_cnt_ext)
617 /* LP timer without encoder (counter only) */
618 static struct counter_count stm32_lptim_in1_counts = {
619 .id = 0,
620 .name = "LPTimer Count",
621 .functions_list = stm32_lptim_cnt_functions,
622 .num_functions = 1,
623 .synapses = stm32_lptim_cnt_synapses,
624 .num_synapses = 1,
625 .ext = stm32_lptim_cnt_ext,
626 .num_ext = ARRAY_SIZE(stm32_lptim_cnt_ext)
629 static int stm32_lptim_cnt_probe(struct platform_device *pdev)
631 struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
632 struct stm32_lptim_cnt *priv;
633 struct iio_dev *indio_dev;
634 int ret;
636 if (IS_ERR_OR_NULL(ddata))
637 return -EINVAL;
639 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
640 if (!indio_dev)
641 return -ENOMEM;
643 priv = iio_priv(indio_dev);
644 priv->dev = &pdev->dev;
645 priv->regmap = ddata->regmap;
646 priv->clk = ddata->clk;
647 priv->ceiling = STM32_LPTIM_MAX_ARR;
649 /* Initialize IIO device */
650 indio_dev->name = dev_name(&pdev->dev);
651 indio_dev->dev.parent = &pdev->dev;
652 indio_dev->dev.of_node = pdev->dev.of_node;
653 indio_dev->info = &stm32_lptim_cnt_iio_info;
654 if (ddata->has_encoder)
655 indio_dev->channels = &stm32_lptim_enc_channels;
656 else
657 indio_dev->channels = &stm32_lptim_cnt_channels;
658 indio_dev->num_channels = 1;
660 /* Initialize Counter device */
661 priv->counter.name = dev_name(&pdev->dev);
662 priv->counter.parent = &pdev->dev;
663 priv->counter.ops = &stm32_lptim_cnt_ops;
664 if (ddata->has_encoder) {
665 priv->counter.counts = &stm32_lptim_enc_counts;
666 priv->counter.num_signals = ARRAY_SIZE(stm32_lptim_cnt_signals);
667 } else {
668 priv->counter.counts = &stm32_lptim_in1_counts;
669 priv->counter.num_signals = 1;
671 priv->counter.num_counts = 1;
672 priv->counter.signals = stm32_lptim_cnt_signals;
673 priv->counter.priv = priv;
675 platform_set_drvdata(pdev, priv);
677 ret = devm_iio_device_register(&pdev->dev, indio_dev);
678 if (ret)
679 return ret;
681 return devm_counter_register(&pdev->dev, &priv->counter);
684 #ifdef CONFIG_PM_SLEEP
685 static int stm32_lptim_cnt_suspend(struct device *dev)
687 struct stm32_lptim_cnt *priv = dev_get_drvdata(dev);
688 int ret;
690 /* Only take care of enabled counter: don't disturb other MFD child */
691 if (priv->enabled) {
692 ret = stm32_lptim_setup(priv, 0);
693 if (ret)
694 return ret;
696 ret = stm32_lptim_set_enable_state(priv, 0);
697 if (ret)
698 return ret;
700 /* Force enable state for later resume */
701 priv->enabled = true;
704 return pinctrl_pm_select_sleep_state(dev);
707 static int stm32_lptim_cnt_resume(struct device *dev)
709 struct stm32_lptim_cnt *priv = dev_get_drvdata(dev);
710 int ret;
712 ret = pinctrl_pm_select_default_state(dev);
713 if (ret)
714 return ret;
716 if (priv->enabled) {
717 priv->enabled = false;
718 ret = stm32_lptim_setup(priv, 1);
719 if (ret)
720 return ret;
722 ret = stm32_lptim_set_enable_state(priv, 1);
723 if (ret)
724 return ret;
727 return 0;
729 #endif
731 static SIMPLE_DEV_PM_OPS(stm32_lptim_cnt_pm_ops, stm32_lptim_cnt_suspend,
732 stm32_lptim_cnt_resume);
734 static const struct of_device_id stm32_lptim_cnt_of_match[] = {
735 { .compatible = "st,stm32-lptimer-counter", },
738 MODULE_DEVICE_TABLE(of, stm32_lptim_cnt_of_match);
740 static struct platform_driver stm32_lptim_cnt_driver = {
741 .probe = stm32_lptim_cnt_probe,
742 .driver = {
743 .name = "stm32-lptimer-counter",
744 .of_match_table = stm32_lptim_cnt_of_match,
745 .pm = &stm32_lptim_cnt_pm_ops,
748 module_platform_driver(stm32_lptim_cnt_driver);
750 MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
751 MODULE_ALIAS("platform:stm32-lptimer-counter");
752 MODULE_DESCRIPTION("STMicroelectronics STM32 LPTIM counter driver");
753 MODULE_LICENSE("GPL v2");