drm/exynos: Stop using drm_framebuffer_unregister_private
[linux/fpc-iii.git] / drivers / gpu / drm / tegra / rgb.c
bloba131b44e2d6fba01d05cbe1c90d5d24ce4f7b20c
1 /*
2 * Copyright (C) 2012 Avionic Design GmbH
3 * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 */
10 #include <linux/clk.h>
12 #include <drm/drm_atomic_helper.h>
13 #include <drm/drm_panel.h>
15 #include "drm.h"
16 #include "dc.h"
18 struct tegra_rgb {
19 struct tegra_output output;
20 struct tegra_dc *dc;
22 struct clk *clk_parent;
23 struct clk *clk;
26 static inline struct tegra_rgb *to_rgb(struct tegra_output *output)
28 return container_of(output, struct tegra_rgb, output);
31 struct reg_entry {
32 unsigned long offset;
33 unsigned long value;
36 static const struct reg_entry rgb_enable[] = {
37 { DC_COM_PIN_OUTPUT_ENABLE(0), 0x00000000 },
38 { DC_COM_PIN_OUTPUT_ENABLE(1), 0x00000000 },
39 { DC_COM_PIN_OUTPUT_ENABLE(2), 0x00000000 },
40 { DC_COM_PIN_OUTPUT_ENABLE(3), 0x00000000 },
41 { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 },
42 { DC_COM_PIN_OUTPUT_POLARITY(1), 0x01000000 },
43 { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 },
44 { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 },
45 { DC_COM_PIN_OUTPUT_DATA(0), 0x00000000 },
46 { DC_COM_PIN_OUTPUT_DATA(1), 0x00000000 },
47 { DC_COM_PIN_OUTPUT_DATA(2), 0x00000000 },
48 { DC_COM_PIN_OUTPUT_DATA(3), 0x00000000 },
49 { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 },
50 { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 },
51 { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 },
52 { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 },
53 { DC_COM_PIN_OUTPUT_SELECT(4), 0x00210222 },
54 { DC_COM_PIN_OUTPUT_SELECT(5), 0x00002200 },
55 { DC_COM_PIN_OUTPUT_SELECT(6), 0x00020000 },
58 static const struct reg_entry rgb_disable[] = {
59 { DC_COM_PIN_OUTPUT_SELECT(6), 0x00000000 },
60 { DC_COM_PIN_OUTPUT_SELECT(5), 0x00000000 },
61 { DC_COM_PIN_OUTPUT_SELECT(4), 0x00000000 },
62 { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 },
63 { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 },
64 { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 },
65 { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 },
66 { DC_COM_PIN_OUTPUT_DATA(3), 0xaaaaaaaa },
67 { DC_COM_PIN_OUTPUT_DATA(2), 0xaaaaaaaa },
68 { DC_COM_PIN_OUTPUT_DATA(1), 0xaaaaaaaa },
69 { DC_COM_PIN_OUTPUT_DATA(0), 0xaaaaaaaa },
70 { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 },
71 { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 },
72 { DC_COM_PIN_OUTPUT_POLARITY(1), 0x00000000 },
73 { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 },
74 { DC_COM_PIN_OUTPUT_ENABLE(3), 0x55555555 },
75 { DC_COM_PIN_OUTPUT_ENABLE(2), 0x55555555 },
76 { DC_COM_PIN_OUTPUT_ENABLE(1), 0x55150005 },
77 { DC_COM_PIN_OUTPUT_ENABLE(0), 0x55555555 },
80 static void tegra_dc_write_regs(struct tegra_dc *dc,
81 const struct reg_entry *table,
82 unsigned int num)
84 unsigned int i;
86 for (i = 0; i < num; i++)
87 tegra_dc_writel(dc, table[i].value, table[i].offset);
90 static const struct drm_connector_funcs tegra_rgb_connector_funcs = {
91 .dpms = drm_atomic_helper_connector_dpms,
92 .reset = drm_atomic_helper_connector_reset,
93 .detect = tegra_output_connector_detect,
94 .fill_modes = drm_helper_probe_single_connector_modes,
95 .destroy = tegra_output_connector_destroy,
96 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
97 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
100 static enum drm_mode_status
101 tegra_rgb_connector_mode_valid(struct drm_connector *connector,
102 struct drm_display_mode *mode)
105 * FIXME: For now, always assume that the mode is okay. There are
106 * unresolved issues with clk_round_rate(), which doesn't always
107 * reliably report whether a frequency can be set or not.
109 return MODE_OK;
112 static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = {
113 .get_modes = tegra_output_connector_get_modes,
114 .mode_valid = tegra_rgb_connector_mode_valid,
117 static const struct drm_encoder_funcs tegra_rgb_encoder_funcs = {
118 .destroy = tegra_output_encoder_destroy,
121 static void tegra_rgb_encoder_disable(struct drm_encoder *encoder)
123 struct tegra_output *output = encoder_to_output(encoder);
124 struct tegra_rgb *rgb = to_rgb(output);
126 if (output->panel)
127 drm_panel_disable(output->panel);
129 tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable));
130 tegra_dc_commit(rgb->dc);
132 if (output->panel)
133 drm_panel_unprepare(output->panel);
136 static void tegra_rgb_encoder_enable(struct drm_encoder *encoder)
138 struct tegra_output *output = encoder_to_output(encoder);
139 struct tegra_rgb *rgb = to_rgb(output);
140 u32 value;
142 if (output->panel)
143 drm_panel_prepare(output->panel);
145 tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable));
147 value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL;
148 tegra_dc_writel(rgb->dc, value, DC_DISP_DATA_ENABLE_OPTIONS);
150 /* XXX: parameterize? */
151 value = tegra_dc_readl(rgb->dc, DC_COM_PIN_OUTPUT_POLARITY(1));
152 value &= ~LVS_OUTPUT_POLARITY_LOW;
153 value &= ~LHS_OUTPUT_POLARITY_LOW;
154 tegra_dc_writel(rgb->dc, value, DC_COM_PIN_OUTPUT_POLARITY(1));
156 /* XXX: parameterize? */
157 value = DISP_DATA_FORMAT_DF1P1C | DISP_ALIGNMENT_MSB |
158 DISP_ORDER_RED_BLUE;
159 tegra_dc_writel(rgb->dc, value, DC_DISP_DISP_INTERFACE_CONTROL);
161 /* XXX: parameterize? */
162 value = SC0_H_QUALIFIER_NONE | SC1_H_QUALIFIER_NONE;
163 tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS);
165 tegra_dc_commit(rgb->dc);
167 if (output->panel)
168 drm_panel_enable(output->panel);
171 static int
172 tegra_rgb_encoder_atomic_check(struct drm_encoder *encoder,
173 struct drm_crtc_state *crtc_state,
174 struct drm_connector_state *conn_state)
176 struct tegra_output *output = encoder_to_output(encoder);
177 struct tegra_dc *dc = to_tegra_dc(conn_state->crtc);
178 unsigned long pclk = crtc_state->mode.clock * 1000;
179 struct tegra_rgb *rgb = to_rgb(output);
180 unsigned int div;
181 int err;
184 * We may not want to change the frequency of the parent clock, since
185 * it may be a parent for other peripherals. This is due to the fact
186 * that on Tegra20 there's only a single clock dedicated to display
187 * (pll_d_out0), whereas later generations have a second one that can
188 * be used to independently drive a second output (pll_d2_out0).
190 * As a way to support multiple outputs on Tegra20 as well, pll_p is
191 * typically used as the parent clock for the display controllers.
192 * But this comes at a cost: pll_p is the parent of several other
193 * peripherals, so its frequency shouldn't change out of the blue.
195 * The best we can do at this point is to use the shift clock divider
196 * and hope that the desired frequency can be matched (or at least
197 * matched sufficiently close that the panel will still work).
199 div = ((clk_get_rate(rgb->clk) * 2) / pclk) - 2;
200 pclk = 0;
202 err = tegra_dc_state_setup_clock(dc, crtc_state, rgb->clk_parent,
203 pclk, div);
204 if (err < 0) {
205 dev_err(output->dev, "failed to setup CRTC state: %d\n", err);
206 return err;
209 return err;
212 static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = {
213 .disable = tegra_rgb_encoder_disable,
214 .enable = tegra_rgb_encoder_enable,
215 .atomic_check = tegra_rgb_encoder_atomic_check,
218 int tegra_dc_rgb_probe(struct tegra_dc *dc)
220 struct device_node *np;
221 struct tegra_rgb *rgb;
222 int err;
224 np = of_get_child_by_name(dc->dev->of_node, "rgb");
225 if (!np || !of_device_is_available(np))
226 return -ENODEV;
228 rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
229 if (!rgb)
230 return -ENOMEM;
232 rgb->output.dev = dc->dev;
233 rgb->output.of_node = np;
234 rgb->dc = dc;
236 err = tegra_output_probe(&rgb->output);
237 if (err < 0)
238 return err;
240 rgb->clk = devm_clk_get(dc->dev, NULL);
241 if (IS_ERR(rgb->clk)) {
242 dev_err(dc->dev, "failed to get clock\n");
243 return PTR_ERR(rgb->clk);
246 rgb->clk_parent = devm_clk_get(dc->dev, "parent");
247 if (IS_ERR(rgb->clk_parent)) {
248 dev_err(dc->dev, "failed to get parent clock\n");
249 return PTR_ERR(rgb->clk_parent);
252 err = clk_set_parent(rgb->clk, rgb->clk_parent);
253 if (err < 0) {
254 dev_err(dc->dev, "failed to set parent clock: %d\n", err);
255 return err;
258 dc->rgb = &rgb->output;
260 return 0;
263 int tegra_dc_rgb_remove(struct tegra_dc *dc)
265 if (!dc->rgb)
266 return 0;
268 tegra_output_remove(dc->rgb);
269 dc->rgb = NULL;
271 return 0;
274 int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
276 struct tegra_output *output = dc->rgb;
277 int err;
279 if (!dc->rgb)
280 return -ENODEV;
282 drm_connector_init(drm, &output->connector, &tegra_rgb_connector_funcs,
283 DRM_MODE_CONNECTOR_LVDS);
284 drm_connector_helper_add(&output->connector,
285 &tegra_rgb_connector_helper_funcs);
286 output->connector.dpms = DRM_MODE_DPMS_OFF;
288 drm_encoder_init(drm, &output->encoder, &tegra_rgb_encoder_funcs,
289 DRM_MODE_ENCODER_LVDS, NULL);
290 drm_encoder_helper_add(&output->encoder,
291 &tegra_rgb_encoder_helper_funcs);
293 drm_mode_connector_attach_encoder(&output->connector,
294 &output->encoder);
295 drm_connector_register(&output->connector);
297 err = tegra_output_init(drm, output);
298 if (err < 0) {
299 dev_err(output->dev, "failed to initialize output: %d\n", err);
300 return err;
304 * Other outputs can be attached to either display controller. The RGB
305 * outputs are an exception and work only with their parent display
306 * controller.
308 output->encoder.possible_crtcs = drm_crtc_mask(&dc->base);
310 return 0;
313 int tegra_dc_rgb_exit(struct tegra_dc *dc)
315 if (dc->rgb)
316 tegra_output_exit(dc->rgb);
318 return 0;