2 * Linux ARCnet driver - device-independent routines
4 * Written 1997 by David Woodhouse.
5 * Written 1994-1999 by Avery Pennarun.
6 * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
7 * Derived from skeleton.c by Donald Becker.
9 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
10 * for sponsoring the further development of this driver.
12 * **********************
14 * The original copyright was as follows:
16 * skeleton.c Written 1993 by Donald Becker.
17 * Copyright 1993 United States Government as represented by the
18 * Director, National Security Agency. This software may only be used
19 * and distributed according to the terms of the GNU General Public License as
20 * modified by SRC, incorporated herein by reference.
22 * **********************
24 * The change log is now in a file called ChangeLog in this directory.
27 * - Crynwr arcnet.com/arcether.com packet drivers.
28 * - arcnet.c v0.00 dated 1/1/94 and apparently by
29 * Donald Becker - it didn't work :)
30 * - skeleton.c v0.05 dated 11/16/93 by Donald Becker
31 * (from Linux Kernel 1.1.45)
32 * - RFC's 1201 and 1051 - re: TCP/IP over ARCnet
33 * - The official ARCnet COM9026 data sheets (!) thanks to
34 * Ken Cornetet <kcornete@nyx10.cs.du.edu>
35 * - The official ARCnet COM20020 data sheets.
36 * - Information on some more obscure ARCnet controller chips, thanks
37 * to the nice people at SMSC.
38 * - net/inet/eth.c (from kernel 1.1.50) for header-building info.
39 * - Alternate Linux ARCnet source by V.Shergin <vsher@sao.stavropol.su>
40 * - Textual information and more alternate source from Joachim Koenig
44 #define VERSION "arcnet: v3.94 BETA 2007/02/08 - by Avery Pennarun et al.\n"
46 #include <linux/module.h>
47 #include <linux/types.h>
48 #include <linux/delay.h>
49 #include <linux/netdevice.h>
50 #include <linux/if_arp.h>
52 #include <linux/init.h>
53 #include <linux/arcdevice.h>
54 #include <linux/jiffies.h>
56 /* "do nothing" functions for protocol drivers */
57 static void null_rx(struct net_device
*dev
, int bufnum
,
58 struct archdr
*pkthdr
, int length
);
59 static int null_build_header(struct sk_buff
*skb
, struct net_device
*dev
,
60 unsigned short type
, uint8_t daddr
);
61 static int null_prepare_tx(struct net_device
*dev
, struct archdr
*pkt
,
62 int length
, int bufnum
);
64 static void arcnet_rx(struct net_device
*dev
, int bufnum
);
67 * one ArcProto per possible proto ID. None of the elements of
68 * arc_proto_map are allowed to be NULL; they will get set to
69 * arc_proto_default instead. It also must not be NULL; if you would like
70 * to set it to NULL, set it to &arc_proto_null instead.
72 struct ArcProto
*arc_proto_map
[256], *arc_proto_default
,
73 *arc_bcast_proto
, *arc_raw_proto
;
75 static struct ArcProto arc_proto_null
=
81 .build_header
= null_build_header
,
82 .prepare_tx
= null_prepare_tx
,
87 /* Exported function prototypes */
88 int arcnet_debug
= ARCNET_DEBUG
;
90 EXPORT_SYMBOL(arc_proto_map
);
91 EXPORT_SYMBOL(arc_proto_default
);
92 EXPORT_SYMBOL(arc_bcast_proto
);
93 EXPORT_SYMBOL(arc_raw_proto
);
94 EXPORT_SYMBOL(arcnet_unregister_proto
);
95 EXPORT_SYMBOL(arcnet_debug
);
96 EXPORT_SYMBOL(alloc_arcdev
);
97 EXPORT_SYMBOL(arcnet_interrupt
);
98 EXPORT_SYMBOL(arcnet_open
);
99 EXPORT_SYMBOL(arcnet_close
);
100 EXPORT_SYMBOL(arcnet_send_packet
);
101 EXPORT_SYMBOL(arcnet_timeout
);
103 /* Internal function prototypes */
104 static int arcnet_header(struct sk_buff
*skb
, struct net_device
*dev
,
105 unsigned short type
, const void *daddr
,
106 const void *saddr
, unsigned len
);
107 static int arcnet_rebuild_header(struct sk_buff
*skb
);
108 static int go_tx(struct net_device
*dev
);
110 static int debug
= ARCNET_DEBUG
;
111 module_param(debug
, int, 0);
112 MODULE_LICENSE("GPL");
114 static int __init
arcnet_init(void)
118 arcnet_debug
= debug
;
120 printk("arcnet loaded.\n");
124 printk("arcnet: ***\n"
125 "arcnet: * Read arcnet.txt for important release notes!\n"
127 "arcnet: * This is an ALPHA version! (Last stable release: v3.02) E-mail\n"
128 "arcnet: * me if you have any questions, comments, or bug reports.\n"
133 /* initialize the protocol map */
134 arc_raw_proto
= arc_proto_default
= arc_bcast_proto
= &arc_proto_null
;
135 for (count
= 0; count
< 256; count
++)
136 arc_proto_map
[count
] = arc_proto_default
;
139 printk("arcnet: struct sizes: %Zd %Zd %Zd %Zd %Zd\n",
140 sizeof(struct arc_hardware
), sizeof(struct arc_rfc1201
),
141 sizeof(struct arc_rfc1051
), sizeof(struct arc_eth_encap
),
142 sizeof(struct archdr
));
147 static void __exit
arcnet_exit(void)
151 module_init(arcnet_init
);
152 module_exit(arcnet_exit
);
155 * Dump the contents of an sk_buff
157 #if ARCNET_DEBUG_MAX & D_SKB
158 void arcnet_dump_skb(struct net_device
*dev
,
159 struct sk_buff
*skb
, char *desc
)
163 /* dump the packet */
164 snprintf(hdr
, sizeof(hdr
), "%6s:%s skb->data:", dev
->name
, desc
);
165 print_hex_dump(KERN_DEBUG
, hdr
, DUMP_PREFIX_OFFSET
,
166 16, 1, skb
->data
, skb
->len
, true);
169 EXPORT_SYMBOL(arcnet_dump_skb
);
174 * Dump the contents of an ARCnet buffer
176 #if (ARCNET_DEBUG_MAX & (D_RX | D_TX))
177 static void arcnet_dump_packet(struct net_device
*dev
, int bufnum
,
178 char *desc
, int take_arcnet_lock
)
180 struct arcnet_local
*lp
= netdev_priv(dev
);
182 unsigned long flags
= 0;
183 static uint8_t buf
[512];
186 /* hw.copy_from_card expects IRQ context so take the IRQ lock
187 to keep it single threaded */
189 spin_lock_irqsave(&lp
->lock
, flags
);
191 lp
->hw
.copy_from_card(dev
, bufnum
, 0, buf
, 512);
193 spin_unlock_irqrestore(&lp
->lock
, flags
);
195 /* if the offset[0] byte is nonzero, this is a 256-byte packet */
196 length
= (buf
[2] ? 256 : 512);
198 /* dump the packet */
199 snprintf(hdr
, sizeof(hdr
), "%6s:%s packet dump:", dev
->name
, desc
);
200 print_hex_dump(KERN_DEBUG
, hdr
, DUMP_PREFIX_OFFSET
,
201 16, 1, buf
, length
, true);
206 #define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0)
212 * Unregister a protocol driver from the arc_proto_map. Protocol drivers
213 * are responsible for registering themselves, but the unregister routine
214 * is pretty generic so we'll do it here.
216 void arcnet_unregister_proto(struct ArcProto
*proto
)
220 if (arc_proto_default
== proto
)
221 arc_proto_default
= &arc_proto_null
;
222 if (arc_bcast_proto
== proto
)
223 arc_bcast_proto
= arc_proto_default
;
224 if (arc_raw_proto
== proto
)
225 arc_raw_proto
= arc_proto_default
;
227 for (count
= 0; count
< 256; count
++) {
228 if (arc_proto_map
[count
] == proto
)
229 arc_proto_map
[count
] = arc_proto_default
;
235 * Add a buffer to the queue. Only the interrupt handler is allowed to do
236 * this, unless interrupts are disabled.
238 * Note: we don't check for a full queue, since there aren't enough buffers
239 * to more than fill it.
241 static void release_arcbuf(struct net_device
*dev
, int bufnum
)
243 struct arcnet_local
*lp
= netdev_priv(dev
);
246 lp
->buf_queue
[lp
->first_free_buf
++] = bufnum
;
247 lp
->first_free_buf
%= 5;
250 BUGMSG(D_DURING
, "release_arcbuf: freed #%d; buffer queue is now: ",
252 for (i
= lp
->next_buf
; i
!= lp
->first_free_buf
; i
= (i
+1) % 5)
253 BUGMSG2(D_DURING
, "#%d ", lp
->buf_queue
[i
]);
254 BUGMSG2(D_DURING
, "\n");
260 * Get a buffer from the queue. If this returns -1, there are no buffers
263 static int get_arcbuf(struct net_device
*dev
)
265 struct arcnet_local
*lp
= netdev_priv(dev
);
268 if (!atomic_dec_and_test(&lp
->buf_lock
)) {
269 /* already in this function */
270 BUGMSG(D_NORMAL
, "get_arcbuf: overlap (%d)!\n",
271 lp
->buf_lock
.counter
);
273 else { /* we can continue */
274 if (lp
->next_buf
>= 5)
277 if (lp
->next_buf
== lp
->first_free_buf
)
278 BUGMSG(D_NORMAL
, "get_arcbuf: BUG: no buffers are available??\n");
280 buf
= lp
->buf_queue
[lp
->next_buf
++];
287 BUGMSG(D_DURING
, "get_arcbuf: got #%d; buffer queue is now: ", buf
);
288 for (i
= lp
->next_buf
; i
!= lp
->first_free_buf
; i
= (i
+1) % 5)
289 BUGMSG2(D_DURING
, "#%d ", lp
->buf_queue
[i
]);
290 BUGMSG2(D_DURING
, "\n");
293 atomic_inc(&lp
->buf_lock
);
298 static int choose_mtu(void)
300 int count
, mtu
= 65535;
302 /* choose the smallest MTU of all available encaps */
303 for (count
= 0; count
< 256; count
++) {
304 if (arc_proto_map
[count
] != &arc_proto_null
&&
305 arc_proto_map
[count
]->mtu
< mtu
) {
306 mtu
= arc_proto_map
[count
]->mtu
;
310 return mtu
== 65535 ? XMTU
: mtu
;
313 static const struct header_ops arcnet_header_ops
= {
314 .create
= arcnet_header
,
315 .rebuild
= arcnet_rebuild_header
,
318 static const struct net_device_ops arcnet_netdev_ops
= {
319 .ndo_open
= arcnet_open
,
320 .ndo_stop
= arcnet_close
,
321 .ndo_start_xmit
= arcnet_send_packet
,
322 .ndo_tx_timeout
= arcnet_timeout
,
325 /* Setup a struct device for ARCnet. */
326 static void arcdev_setup(struct net_device
*dev
)
328 dev
->type
= ARPHRD_ARCNET
;
329 dev
->netdev_ops
= &arcnet_netdev_ops
;
330 dev
->header_ops
= &arcnet_header_ops
;
331 dev
->hard_header_len
= sizeof(struct archdr
);
332 dev
->mtu
= choose_mtu();
334 dev
->addr_len
= ARCNET_ALEN
;
335 dev
->tx_queue_len
= 100;
336 dev
->broadcast
[0] = 0x00; /* for us, broadcasts are address 0 */
337 dev
->watchdog_timeo
= TX_TIMEOUT
;
339 /* New-style flags. */
340 dev
->flags
= IFF_BROADCAST
;
344 struct net_device
*alloc_arcdev(const char *name
)
346 struct net_device
*dev
;
348 dev
= alloc_netdev(sizeof(struct arcnet_local
),
349 name
&& *name
? name
: "arc%d", NET_NAME_UNKNOWN
,
352 struct arcnet_local
*lp
= netdev_priv(dev
);
353 spin_lock_init(&lp
->lock
);
360 * Open/initialize the board. This is called sometime after booting when
361 * the 'ifconfig' program is run.
363 * This routine should set everything up anew at each open, even registers
364 * that "should" only need to be set once at boot, so that there is
365 * non-reboot way to recover if something goes wrong.
367 int arcnet_open(struct net_device
*dev
)
369 struct arcnet_local
*lp
= netdev_priv(dev
);
370 int count
, newmtu
, error
;
372 BUGMSG(D_INIT
,"opened.");
374 if (!try_module_get(lp
->hw
.owner
))
378 BUGMSG(D_PROTO
, "protocol map (default is '%c'): ",
379 arc_proto_default
->suffix
);
380 for (count
= 0; count
< 256; count
++)
381 BUGMSG2(D_PROTO
, "%c", arc_proto_map
[count
]->suffix
);
382 BUGMSG2(D_PROTO
, "\n");
386 BUGMSG(D_INIT
, "arcnet_open: resetting card.\n");
388 /* try to put the card in a defined state - if it fails the first
389 * time, actually reset it.
392 if (ARCRESET(0) && ARCRESET(1))
395 newmtu
= choose_mtu();
396 if (newmtu
< dev
->mtu
)
399 BUGMSG(D_INIT
, "arcnet_open: mtu: %d.\n", dev
->mtu
);
401 /* autodetect the encapsulation for each host. */
402 memset(lp
->default_proto
, 0, sizeof(lp
->default_proto
));
404 /* the broadcast address is special - use the 'bcast' protocol */
405 for (count
= 0; count
< 256; count
++) {
406 if (arc_proto_map
[count
] == arc_bcast_proto
) {
407 lp
->default_proto
[0] = count
;
412 /* initialize buffers */
413 atomic_set(&lp
->buf_lock
, 1);
415 lp
->next_buf
= lp
->first_free_buf
= 0;
416 release_arcbuf(dev
, 0);
417 release_arcbuf(dev
, 1);
418 release_arcbuf(dev
, 2);
419 release_arcbuf(dev
, 3);
420 lp
->cur_tx
= lp
->next_tx
= -1;
423 lp
->rfc1201
.sequence
= 1;
425 /* bring up the hardware driver */
429 if (dev
->dev_addr
[0] == 0)
430 BUGMSG(D_NORMAL
, "WARNING! Station address 00 is reserved "
431 "for broadcasts!\n");
432 else if (dev
->dev_addr
[0] == 255)
433 BUGMSG(D_NORMAL
, "WARNING! Station address FF may confuse "
434 "DOS networking programs!\n");
436 BUGMSG(D_DEBUG
, "%s: %d: %s\n",__FILE__
,__LINE__
,__func__
);
437 if (ASTATUS() & RESETflag
) {
438 BUGMSG(D_DEBUG
, "%s: %d: %s\n",__FILE__
,__LINE__
,__func__
);
439 ACOMMAND(CFLAGScmd
| RESETclear
);
443 BUGMSG(D_DEBUG
, "%s: %d: %s\n",__FILE__
,__LINE__
,__func__
);
444 /* make sure we're ready to receive IRQ's. */
446 udelay(1); /* give it time to set the mask before
447 * we reset it again. (may not even be
450 BUGMSG(D_DEBUG
, "%s: %d: %s\n",__FILE__
,__LINE__
,__func__
);
451 lp
->intmask
= NORXflag
| RECONflag
;
452 AINTMASK(lp
->intmask
);
453 BUGMSG(D_DEBUG
, "%s: %d: %s\n",__FILE__
,__LINE__
,__func__
);
455 netif_start_queue(dev
);
460 module_put(lp
->hw
.owner
);
465 /* The inverse routine to arcnet_open - shuts down the card. */
466 int arcnet_close(struct net_device
*dev
)
468 struct arcnet_local
*lp
= netdev_priv(dev
);
470 netif_stop_queue(dev
);
472 /* flush TX and disable RX */
474 ACOMMAND(NOTXcmd
); /* stop transmit */
475 ACOMMAND(NORXcmd
); /* disable receive */
478 /* shut down the card */
480 module_put(lp
->hw
.owner
);
485 static int arcnet_header(struct sk_buff
*skb
, struct net_device
*dev
,
486 unsigned short type
, const void *daddr
,
487 const void *saddr
, unsigned len
)
489 const struct arcnet_local
*lp
= netdev_priv(dev
);
490 uint8_t _daddr
, proto_num
;
491 struct ArcProto
*proto
;
494 "create header from %d to %d; protocol %d (%Xh); size %u.\n",
495 saddr
? *(uint8_t *) saddr
: -1,
496 daddr
? *(uint8_t *) daddr
: -1,
499 if (skb
->len
!=0 && len
!= skb
->len
)
500 BUGMSG(D_NORMAL
, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n",
504 /* Type is host order - ? */
505 if(type
== ETH_P_ARCNET
) {
506 proto
= arc_raw_proto
;
507 BUGMSG(D_DEBUG
, "arc_raw_proto used. proto='%c'\n",proto
->suffix
);
508 _daddr
= daddr
? *(uint8_t *) daddr
: 0;
512 * if the dest addr isn't provided, we can't choose an encapsulation!
513 * Store the packet type (eg. ETH_P_IP) for now, and we'll push on a
514 * real header when we do rebuild_header.
516 *(uint16_t *) skb_push(skb
, 2) = type
;
518 * XXX: Why not use skb->mac_len?
520 if (skb
->network_header
- skb
->mac_header
!= 2)
521 BUGMSG(D_NORMAL
, "arcnet_header: Yikes! diff (%d) is not 2!\n",
522 (int)(skb
->network_header
- skb
->mac_header
));
523 return -2; /* return error -- can't transmit yet! */
526 /* otherwise, we can just add the header as usual. */
527 _daddr
= *(uint8_t *) daddr
;
528 proto_num
= lp
->default_proto
[_daddr
];
529 proto
= arc_proto_map
[proto_num
];
530 BUGMSG(D_DURING
, "building header for %02Xh using protocol '%c'\n",
531 proto_num
, proto
->suffix
);
532 if (proto
== &arc_proto_null
&& arc_bcast_proto
!= proto
) {
533 BUGMSG(D_DURING
, "actually, let's use '%c' instead.\n",
534 arc_bcast_proto
->suffix
);
535 proto
= arc_bcast_proto
;
538 return proto
->build_header(skb
, dev
, type
, _daddr
);
543 * Rebuild the ARCnet hard header. This is called after an ARP (or in the
544 * future other address resolution) has completed on this sk_buff. We now
545 * let ARP fill in the destination field.
547 static int arcnet_rebuild_header(struct sk_buff
*skb
)
549 struct net_device
*dev
= skb
->dev
;
550 struct arcnet_local
*lp
= netdev_priv(dev
);
551 int status
= 0; /* default is failure */
554 struct ArcProto
*proto
;
556 * XXX: Why not use skb->mac_len?
558 if (skb
->network_header
- skb
->mac_header
!= 2) {
560 "rebuild_header: shouldn't be here! (hdrsize=%d)\n",
561 (int)(skb
->network_header
- skb
->mac_header
));
564 type
= *(uint16_t *) skb_pull(skb
, 2);
565 BUGMSG(D_DURING
, "rebuild header for protocol %Xh\n", type
);
567 if (type
== ETH_P_IP
) {
569 BUGMSG(D_DURING
, "rebuild header for ethernet protocol %Xh\n", type
);
570 status
= arp_find(&daddr
, skb
) ? 1 : 0;
571 BUGMSG(D_DURING
, " rebuilt: dest is %d; protocol %Xh\n",
576 "I don't understand ethernet protocol %Xh addresses!\n", type
);
577 dev
->stats
.tx_errors
++;
578 dev
->stats
.tx_aborted_errors
++;
581 /* if we couldn't resolve the address... give up. */
585 /* add the _real_ header this time! */
586 proto
= arc_proto_map
[lp
->default_proto
[daddr
]];
587 proto
->build_header(skb
, dev
, type
, daddr
);
589 return 1; /* success */
594 /* Called by the kernel in order to transmit a packet. */
595 netdev_tx_t
arcnet_send_packet(struct sk_buff
*skb
,
596 struct net_device
*dev
)
598 struct arcnet_local
*lp
= netdev_priv(dev
);
600 struct arc_rfc1201
*soft
;
601 struct ArcProto
*proto
;
607 "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n",
608 ASTATUS(), lp
->cur_tx
, lp
->next_tx
, skb
->len
,skb
->protocol
);
610 pkt
= (struct archdr
*) skb
->data
;
611 soft
= &pkt
->soft
.rfc1201
;
612 proto
= arc_proto_map
[soft
->proto
];
614 BUGMSG(D_SKB_SIZE
, "skb: transmitting %d bytes to %02X\n",
615 skb
->len
, pkt
->hard
.dest
);
616 BUGLVL(D_SKB
) arcnet_dump_skb(dev
, skb
, "tx");
618 /* fits in one packet? */
619 if (skb
->len
- ARC_HDR_SIZE
> XMTU
&& !proto
->continue_tx
) {
620 BUGMSG(D_NORMAL
, "fixme: packet too large: compensating badly!\n");
622 return NETDEV_TX_OK
; /* don't try again */
625 /* We're busy transmitting a packet... */
626 netif_stop_queue(dev
);
628 spin_lock_irqsave(&lp
->lock
, flags
);
630 if(lp
->next_tx
== -1)
631 txbuf
= get_arcbuf(dev
);
636 if (proto
->prepare_tx(dev
, pkt
, skb
->len
, txbuf
) &&
638 /* done right away and we don't want to acknowledge
639 the package later - forget about it now */
640 dev
->stats
.tx_bytes
+= skb
->len
;
643 /* do it the 'split' way */
644 lp
->outgoing
.proto
= proto
;
645 lp
->outgoing
.skb
= skb
;
646 lp
->outgoing
.pkt
= pkt
;
650 if (proto
->continue_tx
&&
651 proto
->continue_tx(dev
, txbuf
)) {
653 "bug! continue_tx finished the first time! "
654 "(proto='%c')\n", proto
->suffix
);
657 retval
= NETDEV_TX_OK
;
660 retval
= NETDEV_TX_BUSY
;
664 BUGMSG(D_DEBUG
, "%s: %d: %s, status: %x\n",__FILE__
,__LINE__
,__func__
,ASTATUS());
665 /* make sure we didn't ignore a TX IRQ while we were in here */
668 BUGMSG(D_DEBUG
, "%s: %d: %s\n",__FILE__
,__LINE__
,__func__
);
669 lp
->intmask
|= TXFREEflag
|EXCNAKflag
;
670 AINTMASK(lp
->intmask
);
671 BUGMSG(D_DEBUG
, "%s: %d: %s, status: %x\n",__FILE__
,__LINE__
,__func__
,ASTATUS());
673 spin_unlock_irqrestore(&lp
->lock
, flags
);
677 return retval
; /* no need to try again */
682 * Actually start transmitting a packet that was loaded into a buffer
683 * by prepare_tx. This should _only_ be called by the interrupt handler.
685 static int go_tx(struct net_device
*dev
)
687 struct arcnet_local
*lp
= netdev_priv(dev
);
689 BUGMSG(D_DURING
, "go_tx: status=%Xh, intmask=%Xh, next_tx=%d, cur_tx=%d\n",
690 ASTATUS(), lp
->intmask
, lp
->next_tx
, lp
->cur_tx
);
692 if (lp
->cur_tx
!= -1 || lp
->next_tx
== -1)
695 BUGLVL(D_TX
) arcnet_dump_packet(dev
, lp
->next_tx
, "go_tx", 0);
697 lp
->cur_tx
= lp
->next_tx
;
701 ACOMMAND(TXcmd
| (lp
->cur_tx
<< 3));
703 dev
->stats
.tx_packets
++;
704 lp
->lasttrans_dest
= lp
->lastload_dest
;
705 lp
->lastload_dest
= 0;
706 lp
->excnak_pending
= 0;
707 lp
->intmask
|= TXFREEflag
|EXCNAKflag
;
713 /* Called by the kernel when transmit times out */
714 void arcnet_timeout(struct net_device
*dev
)
717 struct arcnet_local
*lp
= netdev_priv(dev
);
718 int status
= ASTATUS();
721 spin_lock_irqsave(&lp
->lock
, flags
);
722 if (status
& TXFREEflag
) { /* transmit _DID_ finish */
723 msg
= " - missed IRQ?";
726 dev
->stats
.tx_aborted_errors
++;
728 ACOMMAND(NOTXcmd
| (lp
->cur_tx
<< 3));
730 dev
->stats
.tx_errors
++;
732 /* make sure we didn't miss a TX or a EXC NAK IRQ */
734 lp
->intmask
|= TXFREEflag
|EXCNAKflag
;
735 AINTMASK(lp
->intmask
);
737 spin_unlock_irqrestore(&lp
->lock
, flags
);
739 if (time_after(jiffies
, lp
->last_timeout
+ 10*HZ
)) {
740 BUGMSG(D_EXTRA
, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n",
741 msg
, status
, lp
->intmask
, lp
->lasttrans_dest
);
742 lp
->last_timeout
= jiffies
;
745 if (lp
->cur_tx
== -1)
746 netif_wake_queue(dev
);
751 * The typical workload of the driver: Handle the network interface
752 * interrupts. Establish which device needs attention, and call the correct
753 * chipset interrupt handler.
755 irqreturn_t
arcnet_interrupt(int irq
, void *dev_id
)
757 struct net_device
*dev
= dev_id
;
758 struct arcnet_local
*lp
;
759 int recbuf
, status
, diagstatus
, didsomething
, boguscount
;
760 int retval
= IRQ_NONE
;
762 BUGMSG(D_DURING
, "\n");
764 BUGMSG(D_DURING
, "in arcnet_interrupt\n");
766 lp
= netdev_priv(dev
);
769 spin_lock(&lp
->lock
);
772 * RESET flag was enabled - if device is not running, we must clear it right
773 * away (but nothing else).
775 if (!netif_running(dev
)) {
776 if (ASTATUS() & RESETflag
)
777 ACOMMAND(CFLAGScmd
| RESETclear
);
779 spin_unlock(&lp
->lock
);
783 BUGMSG(D_DURING
, "in arcnet_inthandler (status=%Xh, intmask=%Xh)\n",
784 ASTATUS(), lp
->intmask
);
789 diagstatus
= (status
>> 8) & 0xFF;
791 BUGMSG(D_DEBUG
, "%s: %d: %s: status=%x\n",
792 __FILE__
,__LINE__
,__func__
,status
);
796 * RESET flag was enabled - card is resetting and if RX is
797 * disabled, it's NOT because we just got a packet.
799 * The card is in an undefined state. Clear it out and start over.
801 if (status
& RESETflag
) {
802 BUGMSG(D_NORMAL
, "spurious reset (status=%Xh)\n", status
);
806 /* get out of the interrupt handler! */
810 * RX is inhibited - we must have received something. Prepare to
811 * receive into the next buffer.
813 * We don't actually copy the received packet from the card until
814 * after the transmit handler runs (and possibly launches the next
815 * tx); this should improve latency slightly if we get both types
816 * of interrupts at once.
819 if (status
& lp
->intmask
& NORXflag
) {
821 BUGMSG(D_DURING
, "Buffer #%d: receive irq (status=%Xh)\n",
824 lp
->cur_rx
= get_arcbuf(dev
);
825 if (lp
->cur_rx
!= -1) {
826 BUGMSG(D_DURING
, "enabling receive to buffer #%d\n",
828 ACOMMAND(RXcmd
| (lp
->cur_rx
<< 3) | RXbcasts
);
833 if((diagstatus
& EXCNAKflag
)) {
834 BUGMSG(D_DURING
, "EXCNAK IRQ (diagstat=%Xh)\n",
837 ACOMMAND(NOTXcmd
); /* disable transmit */
838 lp
->excnak_pending
= 1;
840 ACOMMAND(EXCNAKclear
);
841 lp
->intmask
&= ~(EXCNAKflag
);
846 /* a transmit finished, and we're interested in it. */
847 if ((status
& lp
->intmask
& TXFREEflag
) || lp
->timed_out
) {
848 lp
->intmask
&= ~(TXFREEflag
|EXCNAKflag
);
850 BUGMSG(D_DURING
, "TX IRQ (stat=%Xh)\n", status
);
852 if (lp
->cur_tx
!= -1 && !lp
->timed_out
) {
853 if(!(status
& TXACKflag
)) {
854 if (lp
->lasttrans_dest
!= 0) {
856 "transmit was not acknowledged! "
857 "(status=%Xh, dest=%02Xh)\n",
858 status
, lp
->lasttrans_dest
);
859 dev
->stats
.tx_errors
++;
860 dev
->stats
.tx_carrier_errors
++;
863 "broadcast was not acknowledged; that's normal "
864 "(status=%Xh, dest=%02Xh)\n",
865 status
, lp
->lasttrans_dest
);
869 if (lp
->outgoing
.proto
&&
870 lp
->outgoing
.proto
->ack_tx
) {
872 if(status
& TXACKflag
)
874 else if(lp
->excnak_pending
)
880 ->ack_tx(dev
, ackstatus
);
883 if (lp
->cur_tx
!= -1)
884 release_arcbuf(dev
, lp
->cur_tx
);
890 /* send another packet if there is one */
893 /* continue a split packet, if any */
894 if (lp
->outgoing
.proto
&& lp
->outgoing
.proto
->continue_tx
) {
895 int txbuf
= get_arcbuf(dev
);
897 if (lp
->outgoing
.proto
->continue_tx(dev
, txbuf
)) {
898 /* that was the last segment */
899 dev
->stats
.tx_bytes
+= lp
->outgoing
.skb
->len
;
900 if(!lp
->outgoing
.proto
->ack_tx
)
902 dev_kfree_skb_irq(lp
->outgoing
.skb
);
903 lp
->outgoing
.proto
= NULL
;
909 /* inform upper layers of idleness, if necessary */
910 if (lp
->cur_tx
== -1)
911 netif_wake_queue(dev
);
913 /* now process the received packet, if any */
915 BUGLVL(D_RX
) arcnet_dump_packet(dev
, recbuf
, "rx irq", 0);
917 arcnet_rx(dev
, recbuf
);
918 release_arcbuf(dev
, recbuf
);
922 if (status
& lp
->intmask
& RECONflag
) {
923 ACOMMAND(CFLAGScmd
| CONFIGclear
);
924 dev
->stats
.tx_carrier_errors
++;
926 BUGMSG(D_RECON
, "Network reconfiguration detected (status=%Xh)\n",
928 /* MYRECON bit is at bit 7 of diagstatus */
929 if(diagstatus
& 0x80)
930 BUGMSG(D_RECON
,"Put out that recon myself\n");
932 /* is the RECON info empty or old? */
933 if (!lp
->first_recon
|| !lp
->last_recon
||
934 time_after(jiffies
, lp
->last_recon
+ HZ
* 10)) {
935 if (lp
->network_down
)
936 BUGMSG(D_NORMAL
, "reconfiguration detected: cabling restored?\n");
937 lp
->first_recon
= lp
->last_recon
= jiffies
;
938 lp
->num_recons
= lp
->network_down
= 0;
940 BUGMSG(D_DURING
, "recon: clearing counters.\n");
941 } else { /* add to current RECON counter */
942 lp
->last_recon
= jiffies
;
945 BUGMSG(D_DURING
, "recon: counter=%d, time=%lds, net=%d\n",
947 (lp
->last_recon
- lp
->first_recon
) / HZ
,
950 /* if network is marked up;
951 * and first_recon and last_recon are 60+ apart;
952 * and the average no. of recons counted is
953 * > RECON_THRESHOLD/min;
954 * then print a warning message.
956 if (!lp
->network_down
&&
957 (lp
->last_recon
- lp
->first_recon
) <= HZ
* 60 &&
958 lp
->num_recons
>= RECON_THRESHOLD
) {
959 lp
->network_down
= 1;
960 BUGMSG(D_NORMAL
, "many reconfigurations detected: cabling problem?\n");
961 } else if (!lp
->network_down
&&
962 lp
->last_recon
- lp
->first_recon
> HZ
* 60) {
963 /* reset counters if we've gone for over a minute. */
964 lp
->first_recon
= lp
->last_recon
;
968 } else if (lp
->network_down
&&
969 time_after(jiffies
, lp
->last_recon
+ HZ
* 10)) {
970 if (lp
->network_down
)
971 BUGMSG(D_NORMAL
, "cabling restored?\n");
972 lp
->first_recon
= lp
->last_recon
= 0;
973 lp
->num_recons
= lp
->network_down
= 0;
975 BUGMSG(D_DURING
, "not recon: clearing counters anyway.\n");
979 retval
|= IRQ_HANDLED
;
982 while (--boguscount
&& didsomething
);
984 BUGMSG(D_DURING
, "arcnet_interrupt complete (status=%Xh, count=%d)\n",
985 ASTATUS(), boguscount
);
986 BUGMSG(D_DURING
, "\n");
991 AINTMASK(lp
->intmask
);
993 spin_unlock(&lp
->lock
);
999 * This is a generic packet receiver that calls arcnet??_rx depending on the
1000 * protocol ID found.
1002 static void arcnet_rx(struct net_device
*dev
, int bufnum
)
1004 struct arcnet_local
*lp
= netdev_priv(dev
);
1006 struct arc_rfc1201
*soft
;
1009 soft
= &pkt
.soft
.rfc1201
;
1011 lp
->hw
.copy_from_card(dev
, bufnum
, 0, &pkt
, ARC_HDR_SIZE
);
1012 if (pkt
.hard
.offset
[0]) {
1013 ofs
= pkt
.hard
.offset
[0];
1016 ofs
= pkt
.hard
.offset
[1];
1020 /* get the full header, if possible */
1021 if (sizeof(pkt
.soft
) <= length
)
1022 lp
->hw
.copy_from_card(dev
, bufnum
, ofs
, soft
, sizeof(pkt
.soft
));
1024 memset(&pkt
.soft
, 0, sizeof(pkt
.soft
));
1025 lp
->hw
.copy_from_card(dev
, bufnum
, ofs
, soft
, length
);
1028 BUGMSG(D_DURING
, "Buffer #%d: received packet from %02Xh to %02Xh "
1030 bufnum
, pkt
.hard
.source
, pkt
.hard
.dest
, length
);
1032 dev
->stats
.rx_packets
++;
1033 dev
->stats
.rx_bytes
+= length
+ ARC_HDR_SIZE
;
1035 /* call the right receiver for the protocol */
1036 if (arc_proto_map
[soft
->proto
]->is_ip
) {
1039 *oldp
= arc_proto_map
[lp
->default_proto
[pkt
.hard
.source
]],
1040 *newp
= arc_proto_map
[soft
->proto
];
1044 "got protocol %02Xh; encap for host %02Xh is now '%c'"
1045 " (was '%c')\n", soft
->proto
, pkt
.hard
.source
,
1046 newp
->suffix
, oldp
->suffix
);
1050 /* broadcasts will always be done with the last-used encap. */
1051 lp
->default_proto
[0] = soft
->proto
;
1053 /* in striking contrast, the following isn't a hack. */
1054 lp
->default_proto
[pkt
.hard
.source
] = soft
->proto
;
1056 /* call the protocol-specific receiver. */
1057 arc_proto_map
[soft
->proto
]->rx(dev
, bufnum
, &pkt
, length
);
1061 static void null_rx(struct net_device
*dev
, int bufnum
,
1062 struct archdr
*pkthdr
, int length
)
1065 "rx: don't know how to deal with proto %02Xh from host %02Xh.\n",
1066 pkthdr
->soft
.rfc1201
.proto
, pkthdr
->hard
.source
);
1070 static int null_build_header(struct sk_buff
*skb
, struct net_device
*dev
,
1071 unsigned short type
, uint8_t daddr
)
1073 struct arcnet_local
*lp
= netdev_priv(dev
);
1076 "tx: can't build header for encap %02Xh; load a protocol driver.\n",
1077 lp
->default_proto
[daddr
]);
1084 /* the "do nothing" prepare_tx function warns that there's nothing to do. */
1085 static int null_prepare_tx(struct net_device
*dev
, struct archdr
*pkt
,
1086 int length
, int bufnum
)
1088 struct arcnet_local
*lp
= netdev_priv(dev
);
1089 struct arc_hardware newpkt
;
1091 BUGMSG(D_PROTO
, "tx: no encap for this host; load a protocol driver.\n");
1093 /* send a packet to myself -- will never get received, of course */
1094 newpkt
.source
= newpkt
.dest
= dev
->dev_addr
[0];
1096 /* only one byte of actual data (and it's random) */
1097 newpkt
.offset
[0] = 0xFF;
1099 lp
->hw
.copy_to_card(dev
, bufnum
, 0, &newpkt
, ARC_HDR_SIZE
);
1101 return 1; /* done */