ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards
[linux/fpc-iii.git] / net / ax25 / ax25_out.c
blobbe2acab9be9d8473fcf00beb861981979f381048
1 /*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
7 * Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
8 * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
9 * Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
11 #include <linux/errno.h>
12 #include <linux/types.h>
13 #include <linux/socket.h>
14 #include <linux/in.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/timer.h>
18 #include <linux/string.h>
19 #include <linux/sockios.h>
20 #include <linux/spinlock.h>
21 #include <linux/net.h>
22 #include <linux/slab.h>
23 #include <net/ax25.h>
24 #include <linux/inet.h>
25 #include <linux/netdevice.h>
26 #include <linux/skbuff.h>
27 #include <linux/netfilter.h>
28 #include <net/sock.h>
29 #include <asm/uaccess.h>
30 #include <linux/fcntl.h>
31 #include <linux/mm.h>
32 #include <linux/interrupt.h>
34 static DEFINE_SPINLOCK(ax25_frag_lock);
36 ax25_cb *ax25_send_frame(struct sk_buff *skb, int paclen, ax25_address *src, ax25_address *dest, ax25_digi *digi, struct net_device *dev)
38 ax25_dev *ax25_dev;
39 ax25_cb *ax25;
42 * Take the default packet length for the device if zero is
43 * specified.
45 if (paclen == 0) {
46 if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
47 return NULL;
49 paclen = ax25_dev->values[AX25_VALUES_PACLEN];
53 * Look for an existing connection.
55 if ((ax25 = ax25_find_cb(src, dest, digi, dev)) != NULL) {
56 ax25_output(ax25, paclen, skb);
57 return ax25; /* It already existed */
60 if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
61 return NULL;
63 if ((ax25 = ax25_create_cb()) == NULL)
64 return NULL;
66 ax25_fillin_cb(ax25, ax25_dev);
68 ax25->source_addr = *src;
69 ax25->dest_addr = *dest;
71 if (digi != NULL) {
72 ax25->digipeat = kmemdup(digi, sizeof(*digi), GFP_ATOMIC);
73 if (ax25->digipeat == NULL) {
74 ax25_cb_put(ax25);
75 return NULL;
79 switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
80 case AX25_PROTO_STD_SIMPLEX:
81 case AX25_PROTO_STD_DUPLEX:
82 ax25_std_establish_data_link(ax25);
83 break;
85 #ifdef CONFIG_AX25_DAMA_SLAVE
86 case AX25_PROTO_DAMA_SLAVE:
87 if (ax25_dev->dama.slave)
88 ax25_ds_establish_data_link(ax25);
89 else
90 ax25_std_establish_data_link(ax25);
91 break;
92 #endif
96 * There is one ref for the state machine; a caller needs
97 * one more to put it back, just like with the existing one.
99 ax25_cb_hold(ax25);
101 ax25_cb_add(ax25);
103 ax25->state = AX25_STATE_1;
105 ax25_start_heartbeat(ax25);
107 ax25_output(ax25, paclen, skb);
109 return ax25; /* We had to create it */
112 EXPORT_SYMBOL(ax25_send_frame);
115 * All outgoing AX.25 I frames pass via this routine. Therefore this is
116 * where the fragmentation of frames takes place. If fragment is set to
117 * zero then we are not allowed to do fragmentation, even if the frame
118 * is too large.
120 void ax25_output(ax25_cb *ax25, int paclen, struct sk_buff *skb)
122 struct sk_buff *skbn;
123 unsigned char *p;
124 int frontlen, len, fragno, ka9qfrag, first = 1;
126 if (paclen < 16) {
127 WARN_ON_ONCE(1);
128 kfree_skb(skb);
129 return;
132 if ((skb->len - 1) > paclen) {
133 if (*skb->data == AX25_P_TEXT) {
134 skb_pull(skb, 1); /* skip PID */
135 ka9qfrag = 0;
136 } else {
137 paclen -= 2; /* Allow for fragment control info */
138 ka9qfrag = 1;
141 fragno = skb->len / paclen;
142 if (skb->len % paclen == 0) fragno--;
144 frontlen = skb_headroom(skb); /* Address space + CTRL */
146 while (skb->len > 0) {
147 spin_lock_bh(&ax25_frag_lock);
148 if ((skbn = alloc_skb(paclen + 2 + frontlen, GFP_ATOMIC)) == NULL) {
149 spin_unlock_bh(&ax25_frag_lock);
150 printk(KERN_CRIT "AX.25: ax25_output - out of memory\n");
151 return;
154 if (skb->sk != NULL)
155 skb_set_owner_w(skbn, skb->sk);
157 spin_unlock_bh(&ax25_frag_lock);
159 len = (paclen > skb->len) ? skb->len : paclen;
161 if (ka9qfrag == 1) {
162 skb_reserve(skbn, frontlen + 2);
163 skb_set_network_header(skbn,
164 skb_network_offset(skb));
165 skb_copy_from_linear_data(skb, skb_put(skbn, len), len);
166 p = skb_push(skbn, 2);
168 *p++ = AX25_P_SEGMENT;
170 *p = fragno--;
171 if (first) {
172 *p |= AX25_SEG_FIRST;
173 first = 0;
175 } else {
176 skb_reserve(skbn, frontlen + 1);
177 skb_set_network_header(skbn,
178 skb_network_offset(skb));
179 skb_copy_from_linear_data(skb, skb_put(skbn, len), len);
180 p = skb_push(skbn, 1);
181 *p = AX25_P_TEXT;
184 skb_pull(skb, len);
185 skb_queue_tail(&ax25->write_queue, skbn); /* Throw it on the queue */
188 kfree_skb(skb);
189 } else {
190 skb_queue_tail(&ax25->write_queue, skb); /* Throw it on the queue */
193 switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
194 case AX25_PROTO_STD_SIMPLEX:
195 case AX25_PROTO_STD_DUPLEX:
196 ax25_kick(ax25);
197 break;
199 #ifdef CONFIG_AX25_DAMA_SLAVE
201 * A DAMA slave is _required_ to work as normal AX.25L2V2
202 * if no DAMA master is available.
204 case AX25_PROTO_DAMA_SLAVE:
205 if (!ax25->ax25_dev->dama.slave) ax25_kick(ax25);
206 break;
207 #endif
212 * This procedure is passed a buffer descriptor for an iframe. It builds
213 * the rest of the control part of the frame and then writes it out.
215 static void ax25_send_iframe(ax25_cb *ax25, struct sk_buff *skb, int poll_bit)
217 unsigned char *frame;
219 if (skb == NULL)
220 return;
222 skb_reset_network_header(skb);
224 if (ax25->modulus == AX25_MODULUS) {
225 frame = skb_push(skb, 1);
227 *frame = AX25_I;
228 *frame |= (poll_bit) ? AX25_PF : 0;
229 *frame |= (ax25->vr << 5);
230 *frame |= (ax25->vs << 1);
231 } else {
232 frame = skb_push(skb, 2);
234 frame[0] = AX25_I;
235 frame[0] |= (ax25->vs << 1);
236 frame[1] = (poll_bit) ? AX25_EPF : 0;
237 frame[1] |= (ax25->vr << 1);
240 ax25_start_idletimer(ax25);
242 ax25_transmit_buffer(ax25, skb, AX25_COMMAND);
245 void ax25_kick(ax25_cb *ax25)
247 struct sk_buff *skb, *skbn;
248 int last = 1;
249 unsigned short start, end, next;
251 if (ax25->state != AX25_STATE_3 && ax25->state != AX25_STATE_4)
252 return;
254 if (ax25->condition & AX25_COND_PEER_RX_BUSY)
255 return;
257 if (skb_peek(&ax25->write_queue) == NULL)
258 return;
260 start = (skb_peek(&ax25->ack_queue) == NULL) ? ax25->va : ax25->vs;
261 end = (ax25->va + ax25->window) % ax25->modulus;
263 if (start == end)
264 return;
267 * Transmit data until either we're out of data to send or
268 * the window is full. Send a poll on the final I frame if
269 * the window is filled.
273 * Dequeue the frame and copy it.
274 * Check for race with ax25_clear_queues().
276 skb = skb_dequeue(&ax25->write_queue);
277 if (!skb)
278 return;
280 ax25->vs = start;
282 do {
283 if ((skbn = skb_clone(skb, GFP_ATOMIC)) == NULL) {
284 skb_queue_head(&ax25->write_queue, skb);
285 break;
288 if (skb->sk != NULL)
289 skb_set_owner_w(skbn, skb->sk);
291 next = (ax25->vs + 1) % ax25->modulus;
292 last = (next == end);
295 * Transmit the frame copy.
296 * bke 960114: do not set the Poll bit on the last frame
297 * in DAMA mode.
299 switch (ax25->ax25_dev->values[AX25_VALUES_PROTOCOL]) {
300 case AX25_PROTO_STD_SIMPLEX:
301 case AX25_PROTO_STD_DUPLEX:
302 ax25_send_iframe(ax25, skbn, (last) ? AX25_POLLON : AX25_POLLOFF);
303 break;
305 #ifdef CONFIG_AX25_DAMA_SLAVE
306 case AX25_PROTO_DAMA_SLAVE:
307 ax25_send_iframe(ax25, skbn, AX25_POLLOFF);
308 break;
309 #endif
312 ax25->vs = next;
315 * Requeue the original data frame.
317 skb_queue_tail(&ax25->ack_queue, skb);
319 } while (!last && (skb = skb_dequeue(&ax25->write_queue)) != NULL);
321 ax25->condition &= ~AX25_COND_ACK_PENDING;
323 if (!ax25_t1timer_running(ax25)) {
324 ax25_stop_t3timer(ax25);
325 ax25_calculate_t1(ax25);
326 ax25_start_t1timer(ax25);
330 void ax25_transmit_buffer(ax25_cb *ax25, struct sk_buff *skb, int type)
332 struct sk_buff *skbn;
333 unsigned char *ptr;
334 int headroom;
336 if (ax25->ax25_dev == NULL) {
337 ax25_disconnect(ax25, ENETUNREACH);
338 return;
341 headroom = ax25_addr_size(ax25->digipeat);
343 if (skb_headroom(skb) < headroom) {
344 if ((skbn = skb_realloc_headroom(skb, headroom)) == NULL) {
345 printk(KERN_CRIT "AX.25: ax25_transmit_buffer - out of memory\n");
346 kfree_skb(skb);
347 return;
350 if (skb->sk != NULL)
351 skb_set_owner_w(skbn, skb->sk);
353 consume_skb(skb);
354 skb = skbn;
357 ptr = skb_push(skb, headroom);
359 ax25_addr_build(ptr, &ax25->source_addr, &ax25->dest_addr, ax25->digipeat, type, ax25->modulus);
361 ax25_queue_xmit(skb, ax25->ax25_dev->dev);
365 * A small shim to dev_queue_xmit to add the KISS control byte, and do
366 * any packet forwarding in operation.
368 void ax25_queue_xmit(struct sk_buff *skb, struct net_device *dev)
370 unsigned char *ptr;
372 skb->protocol = ax25_type_trans(skb, ax25_fwd_dev(dev));
374 ptr = skb_push(skb, 1);
375 *ptr = 0x00; /* KISS */
377 dev_queue_xmit(skb);
380 int ax25_check_iframes_acked(ax25_cb *ax25, unsigned short nr)
382 if (ax25->vs == nr) {
383 ax25_frames_acked(ax25, nr);
384 ax25_calculate_rtt(ax25);
385 ax25_stop_t1timer(ax25);
386 ax25_start_t3timer(ax25);
387 return 1;
388 } else {
389 if (ax25->va != nr) {
390 ax25_frames_acked(ax25, nr);
391 ax25_calculate_t1(ax25);
392 ax25_start_t1timer(ax25);
393 return 1;
396 return 0;