Linux 4.4.182
[linux/fpc-iii.git] / drivers / ata / sata_vsc.c
blob183eb52085df148a8795a8328452c5c5cd6a8532
1 /*
2 * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
4 * Maintained by: Jeremy Higdon @ SGI
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
8 * Copyright 2004 SGI
10 * Bits from Jeff Garzik, Copyright RedHat, Inc.
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2, or (at your option)
16 * any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; see the file COPYING. If not, write to
25 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
28 * libata documentation is available via 'make {ps|pdf}docs',
29 * as Documentation/DocBook/libata.*
31 * Vitesse hardware documentation presumably available under NDA.
32 * Intel 31244 (same hardware interface) documentation presumably
33 * available from http://developer.intel.com/
37 #include <linux/kernel.h>
38 #include <linux/module.h>
39 #include <linux/pci.h>
40 #include <linux/blkdev.h>
41 #include <linux/delay.h>
42 #include <linux/interrupt.h>
43 #include <linux/dma-mapping.h>
44 #include <linux/device.h>
45 #include <scsi/scsi_host.h>
46 #include <linux/libata.h>
48 #define DRV_NAME "sata_vsc"
49 #define DRV_VERSION "2.3"
51 enum {
52 VSC_MMIO_BAR = 0,
54 /* Interrupt register offsets (from chip base address) */
55 VSC_SATA_INT_STAT_OFFSET = 0x00,
56 VSC_SATA_INT_MASK_OFFSET = 0x04,
58 /* Taskfile registers offsets */
59 VSC_SATA_TF_CMD_OFFSET = 0x00,
60 VSC_SATA_TF_DATA_OFFSET = 0x00,
61 VSC_SATA_TF_ERROR_OFFSET = 0x04,
62 VSC_SATA_TF_FEATURE_OFFSET = 0x06,
63 VSC_SATA_TF_NSECT_OFFSET = 0x08,
64 VSC_SATA_TF_LBAL_OFFSET = 0x0c,
65 VSC_SATA_TF_LBAM_OFFSET = 0x10,
66 VSC_SATA_TF_LBAH_OFFSET = 0x14,
67 VSC_SATA_TF_DEVICE_OFFSET = 0x18,
68 VSC_SATA_TF_STATUS_OFFSET = 0x1c,
69 VSC_SATA_TF_COMMAND_OFFSET = 0x1d,
70 VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28,
71 VSC_SATA_TF_CTL_OFFSET = 0x29,
73 /* DMA base */
74 VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64,
75 VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C,
76 VSC_SATA_DMA_CMD_OFFSET = 0x70,
78 /* SCRs base */
79 VSC_SATA_SCR_STATUS_OFFSET = 0x100,
80 VSC_SATA_SCR_ERROR_OFFSET = 0x104,
81 VSC_SATA_SCR_CONTROL_OFFSET = 0x108,
83 /* Port stride */
84 VSC_SATA_PORT_OFFSET = 0x200,
86 /* Error interrupt status bit offsets */
87 VSC_SATA_INT_ERROR_CRC = 0x40,
88 VSC_SATA_INT_ERROR_T = 0x20,
89 VSC_SATA_INT_ERROR_P = 0x10,
90 VSC_SATA_INT_ERROR_R = 0x8,
91 VSC_SATA_INT_ERROR_E = 0x4,
92 VSC_SATA_INT_ERROR_M = 0x2,
93 VSC_SATA_INT_PHY_CHANGE = 0x1,
94 VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \
95 VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \
96 VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \
97 VSC_SATA_INT_PHY_CHANGE),
100 static int vsc_sata_scr_read(struct ata_link *link,
101 unsigned int sc_reg, u32 *val)
103 if (sc_reg > SCR_CONTROL)
104 return -EINVAL;
105 *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4));
106 return 0;
110 static int vsc_sata_scr_write(struct ata_link *link,
111 unsigned int sc_reg, u32 val)
113 if (sc_reg > SCR_CONTROL)
114 return -EINVAL;
115 writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
116 return 0;
120 static void vsc_freeze(struct ata_port *ap)
122 void __iomem *mask_addr;
124 mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
125 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
127 writeb(0, mask_addr);
131 static void vsc_thaw(struct ata_port *ap)
133 void __iomem *mask_addr;
135 mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
136 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
138 writeb(0xff, mask_addr);
142 static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
144 void __iomem *mask_addr;
145 u8 mask;
147 mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
148 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
149 mask = readb(mask_addr);
150 if (ctl & ATA_NIEN)
151 mask |= 0x80;
152 else
153 mask &= 0x7F;
154 writeb(mask, mask_addr);
158 static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
160 struct ata_ioports *ioaddr = &ap->ioaddr;
161 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
164 * The only thing the ctl register is used for is SRST.
165 * That is not enabled or disabled via tf_load.
166 * However, if ATA_NIEN is changed, then we need to change
167 * the interrupt register.
169 if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
170 ap->last_ctl = tf->ctl;
171 vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
173 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
174 writew(tf->feature | (((u16)tf->hob_feature) << 8),
175 ioaddr->feature_addr);
176 writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
177 ioaddr->nsect_addr);
178 writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
179 ioaddr->lbal_addr);
180 writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
181 ioaddr->lbam_addr);
182 writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
183 ioaddr->lbah_addr);
184 } else if (is_addr) {
185 writew(tf->feature, ioaddr->feature_addr);
186 writew(tf->nsect, ioaddr->nsect_addr);
187 writew(tf->lbal, ioaddr->lbal_addr);
188 writew(tf->lbam, ioaddr->lbam_addr);
189 writew(tf->lbah, ioaddr->lbah_addr);
192 if (tf->flags & ATA_TFLAG_DEVICE)
193 writeb(tf->device, ioaddr->device_addr);
195 ata_wait_idle(ap);
199 static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
201 struct ata_ioports *ioaddr = &ap->ioaddr;
202 u16 nsect, lbal, lbam, lbah, feature;
204 tf->command = ata_sff_check_status(ap);
205 tf->device = readw(ioaddr->device_addr);
206 feature = readw(ioaddr->error_addr);
207 nsect = readw(ioaddr->nsect_addr);
208 lbal = readw(ioaddr->lbal_addr);
209 lbam = readw(ioaddr->lbam_addr);
210 lbah = readw(ioaddr->lbah_addr);
212 tf->feature = feature;
213 tf->nsect = nsect;
214 tf->lbal = lbal;
215 tf->lbam = lbam;
216 tf->lbah = lbah;
218 if (tf->flags & ATA_TFLAG_LBA48) {
219 tf->hob_feature = feature >> 8;
220 tf->hob_nsect = nsect >> 8;
221 tf->hob_lbal = lbal >> 8;
222 tf->hob_lbam = lbam >> 8;
223 tf->hob_lbah = lbah >> 8;
227 static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
229 if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
230 ata_port_freeze(ap);
231 else
232 ata_port_abort(ap);
235 static void vsc_port_intr(u8 port_status, struct ata_port *ap)
237 struct ata_queued_cmd *qc;
238 int handled = 0;
240 if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
241 vsc_error_intr(port_status, ap);
242 return;
245 qc = ata_qc_from_tag(ap, ap->link.active_tag);
246 if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
247 handled = ata_bmdma_port_intr(ap, qc);
249 /* We received an interrupt during a polled command,
250 * or some other spurious condition. Interrupt reporting
251 * with this hardware is fairly reliable so it is safe to
252 * simply clear the interrupt
254 if (unlikely(!handled))
255 ap->ops->sff_check_status(ap);
259 * vsc_sata_interrupt
261 * Read the interrupt register and process for the devices that have
262 * them pending.
264 static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
266 struct ata_host *host = dev_instance;
267 unsigned int i;
268 unsigned int handled = 0;
269 u32 status;
271 status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
273 if (unlikely(status == 0xffffffff || status == 0)) {
274 if (status)
275 dev_err(host->dev,
276 ": IRQ status == 0xffffffff, PCI fault or device removal?\n");
277 goto out;
280 spin_lock(&host->lock);
282 for (i = 0; i < host->n_ports; i++) {
283 u8 port_status = (status >> (8 * i)) & 0xff;
284 if (port_status) {
285 vsc_port_intr(port_status, host->ports[i]);
286 handled++;
290 spin_unlock(&host->lock);
291 out:
292 return IRQ_RETVAL(handled);
296 static struct scsi_host_template vsc_sata_sht = {
297 ATA_BMDMA_SHT(DRV_NAME),
301 static struct ata_port_operations vsc_sata_ops = {
302 .inherits = &ata_bmdma_port_ops,
303 /* The IRQ handling is not quite standard SFF behaviour so we
304 cannot use the default lost interrupt handler */
305 .lost_interrupt = ATA_OP_NULL,
306 .sff_tf_load = vsc_sata_tf_load,
307 .sff_tf_read = vsc_sata_tf_read,
308 .freeze = vsc_freeze,
309 .thaw = vsc_thaw,
310 .scr_read = vsc_sata_scr_read,
311 .scr_write = vsc_sata_scr_write,
314 static void vsc_sata_setup_port(struct ata_ioports *port, void __iomem *base)
316 port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET;
317 port->data_addr = base + VSC_SATA_TF_DATA_OFFSET;
318 port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET;
319 port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET;
320 port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET;
321 port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET;
322 port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET;
323 port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET;
324 port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET;
325 port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET;
326 port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET;
327 port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
328 port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
329 port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
330 port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
331 writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
332 writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
336 static int vsc_sata_init_one(struct pci_dev *pdev,
337 const struct pci_device_id *ent)
339 static const struct ata_port_info pi = {
340 .flags = ATA_FLAG_SATA,
341 .pio_mask = ATA_PIO4,
342 .mwdma_mask = ATA_MWDMA2,
343 .udma_mask = ATA_UDMA6,
344 .port_ops = &vsc_sata_ops,
346 const struct ata_port_info *ppi[] = { &pi, NULL };
347 struct ata_host *host;
348 void __iomem *mmio_base;
349 int i, rc;
350 u8 cls;
352 ata_print_version_once(&pdev->dev, DRV_VERSION);
354 /* allocate host */
355 host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
356 if (!host)
357 return -ENOMEM;
359 rc = pcim_enable_device(pdev);
360 if (rc)
361 return rc;
363 /* check if we have needed resource mapped */
364 if (pci_resource_len(pdev, 0) == 0)
365 return -ENODEV;
367 /* map IO regions and initialize host accordingly */
368 rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
369 if (rc == -EBUSY)
370 pcim_pin_device(pdev);
371 if (rc)
372 return rc;
373 host->iomap = pcim_iomap_table(pdev);
375 mmio_base = host->iomap[VSC_MMIO_BAR];
377 for (i = 0; i < host->n_ports; i++) {
378 struct ata_port *ap = host->ports[i];
379 unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
381 vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
383 ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
384 ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
388 * Use 32 bit DMA mask, because 64 bit address support is poor.
390 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
391 if (rc)
392 return rc;
393 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
394 if (rc)
395 return rc;
398 * Due to a bug in the chip, the default cache line size can't be
399 * used (unless the default is non-zero).
401 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
402 if (cls == 0x00)
403 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
405 if (pci_enable_msi(pdev) == 0)
406 pci_intx(pdev, 0);
409 * Config offset 0x98 is "Extended Control and Status Register 0"
410 * Default value is (1 << 28). All bits except bit 28 are reserved in
411 * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity.
412 * If bit 28 is clear, each port has its own LED.
414 pci_write_config_dword(pdev, 0x98, 0);
416 pci_set_master(pdev);
417 return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
418 IRQF_SHARED, &vsc_sata_sht);
421 static const struct pci_device_id vsc_sata_pci_tbl[] = {
422 { PCI_VENDOR_ID_VITESSE, 0x7174,
423 PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
424 { PCI_VENDOR_ID_INTEL, 0x3200,
425 PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
427 { } /* terminate list */
430 static struct pci_driver vsc_sata_pci_driver = {
431 .name = DRV_NAME,
432 .id_table = vsc_sata_pci_tbl,
433 .probe = vsc_sata_init_one,
434 .remove = ata_pci_remove_one,
437 module_pci_driver(vsc_sata_pci_driver);
439 MODULE_AUTHOR("Jeremy Higdon");
440 MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
441 MODULE_LICENSE("GPL");
442 MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
443 MODULE_VERSION(DRV_VERSION);