1 # Helper to resolve issues with configs that have SPI enabled but I2C
2 # modular, meaning we can't build the codec driver in with I2C support.
3 # We use an ordered list of conditional defaults to pick the appropriate
4 # setting - SPI can't be modular so that case doesn't need to be covered.
5 config SND_SOC_I2C_AND_SPI
9 default y if SPI_MASTER=y
11 config SND_SOC_ALL_CODECS
12 tristate "Build all ASoC CODEC drivers"
13 select SND_SOC_88PM860X if MFD_88PM860X
15 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
16 select SND_SOC_AD1836 if SPI_MASTER
17 select SND_SOC_AD193X if SND_SOC_I2C_AND_SPI
18 select SND_SOC_AD1980 if SND_SOC_AC97_BUS
19 select SND_SOC_ADS117X
20 select SND_SOC_AD73311 if I2C
21 select SND_SOC_AK4104 if SPI_MASTER
22 select SND_SOC_AK4535 if I2C
23 select SND_SOC_AK4642 if I2C
24 select SND_SOC_AK4671 if I2C
25 select SND_SOC_ALC5623 if I2C
26 select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC
27 select SND_SOC_CS42L51 if I2C
28 select SND_SOC_CS4270 if I2C
29 select SND_SOC_CX20442
30 select SND_SOC_DA7210 if I2C
31 select SND_SOC_JZ4740_CODEC if SOC_JZ4740
32 select SND_SOC_MAX98088 if I2C
33 select SND_SOC_MAX9877 if I2C
34 select SND_SOC_PCM3008
36 select SND_SOC_SSM2602 if I2C
37 select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
38 select SND_SOC_TLV320AIC23 if I2C
39 select SND_SOC_TLV320AIC26 if SPI_MASTER
40 select SND_SOC_TLV320AIC3X if I2C
41 select SND_SOC_TPA6130A2 if I2C
42 select SND_SOC_TLV320DAC33 if I2C
43 select SND_SOC_TWL4030 if TWL4030_CORE
44 select SND_SOC_TWL6040 if TWL4030_CORE
45 select SND_SOC_UDA134X
46 select SND_SOC_UDA1380 if I2C
47 select SND_SOC_WL1273 if RADIO_WL1273
48 select SND_SOC_WM2000 if I2C
49 select SND_SOC_WM8350 if MFD_WM8350
50 select SND_SOC_WM8400 if MFD_WM8400
51 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
52 select SND_SOC_WM8523 if I2C
53 select SND_SOC_WM8580 if I2C
54 select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI
56 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
57 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
58 select SND_SOC_WM8737 if SND_SOC_I2C_AND_SPI
59 select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI
60 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
61 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
62 select SND_SOC_WM8770 if SPI_MASTER
63 select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
64 select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI
65 select SND_SOC_WM8900 if I2C
66 select SND_SOC_WM8903 if I2C
67 select SND_SOC_WM8904 if I2C
68 select SND_SOC_WM8940 if I2C
69 select SND_SOC_WM8955 if I2C
70 select SND_SOC_WM8960 if I2C
71 select SND_SOC_WM8961 if I2C
72 select SND_SOC_WM8962 if I2C
73 select SND_SOC_WM8971 if I2C
74 select SND_SOC_WM8974 if I2C
75 select SND_SOC_WM8978 if I2C
76 select SND_SOC_WM8985 if SND_SOC_I2C_AND_SPI
77 select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
78 select SND_SOC_WM8990 if I2C
79 select SND_SOC_WM8993 if I2C
80 select SND_SOC_WM8994 if MFD_WM8994
81 select SND_SOC_WM8995 if SND_SOC_I2C_AND_SPI
82 select SND_SOC_WM9081 if I2C
83 select SND_SOC_WM9090 if I2C
84 select SND_SOC_WM9705 if SND_SOC_AC97_BUS
85 select SND_SOC_WM9712 if SND_SOC_AC97_BUS
86 select SND_SOC_WM9713 if SND_SOC_AC97_BUS
88 Normally ASoC codec drivers are only built if a machine driver which
89 uses them is also built since they are only usable with a machine
90 driver. Selecting this option will allow these drivers to be built
91 without an explicit machine driver for test and development purposes.
93 Support for the bus types used to access the codecs to be built must
94 be selected separately.
98 config SND_SOC_88PM860X
101 config SND_SOC_WM_HUBS
103 default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y
104 default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
106 config SND_SOC_AC97_CODEC
108 select SND_AC97_CODEC
110 config SND_SOC_AD1836
113 config SND_SOC_AD193X
116 config SND_SOC_AD1980
119 config SND_SOC_AD73311
122 config SND_SOC_ADS117X
125 config SND_SOC_AK4104
128 config SND_SOC_AK4535
131 config SND_SOC_AK4642
134 config SND_SOC_AK4671
137 config SND_SOC_ALC5623
140 config SND_SOC_CQ0093VC
143 config SND_SOC_CS42L51
146 # Cirrus Logic CS4270 Codec
147 config SND_SOC_CS4270
150 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
151 # Select if you are affected by the errata where the part will not function
152 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
153 # not select any sample rates that require MCLK to be divided by 1.5.
154 config SND_SOC_CS4270_VD33_ERRATA
156 depends on SND_SOC_CS4270
158 config SND_SOC_CX20442
161 config SND_SOC_JZ4740_CODEC
167 config SND_SOC_DA7210
173 config SND_SOC_MAX98088
176 config SND_SOC_PCM3008
182 config SND_SOC_SSM2602
185 config SND_SOC_STAC9766
188 config SND_SOC_TLV320AIC23
191 config SND_SOC_TLV320AIC26
192 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
195 config SND_SOC_TLV320AIC3X
198 config SND_SOC_TLV320DAC33
201 config SND_SOC_TWL4030
205 config SND_SOC_TWL6040
208 config SND_SOC_UDA134X
211 config SND_SOC_UDA1380
214 config SND_SOC_WL1273
217 config SND_SOC_WM8350
220 config SND_SOC_WM8400
223 config SND_SOC_WM8510
226 config SND_SOC_WM8523
229 config SND_SOC_WM8580
232 config SND_SOC_WM8711
235 config SND_SOC_WM8727
238 config SND_SOC_WM8728
241 config SND_SOC_WM8731
244 config SND_SOC_WM8737
247 config SND_SOC_WM8741
250 config SND_SOC_WM8750
253 config SND_SOC_WM8753
256 config SND_SOC_WM8770
259 config SND_SOC_WM8776
262 config SND_SOC_WM8804
265 config SND_SOC_WM8900
268 config SND_SOC_WM8903
271 config SND_SOC_WM8904
274 config SND_SOC_WM8940
277 config SND_SOC_WM8955
280 config SND_SOC_WM8960
283 config SND_SOC_WM8961
286 config SND_SOC_WM8962
289 config SND_SOC_WM8971
292 config SND_SOC_WM8974
295 config SND_SOC_WM8978
298 config SND_SOC_WM8985
301 config SND_SOC_WM8988
304 config SND_SOC_WM8990
307 config SND_SOC_WM8993
310 config SND_SOC_WM8994
313 config SND_SOC_WM8995
316 config SND_SOC_WM9081
319 config SND_SOC_WM9705
322 config SND_SOC_WM9712
325 config SND_SOC_WM9713
329 config SND_SOC_MAX9877
332 config SND_SOC_TPA6130A2
335 config SND_SOC_WM2000
338 config SND_SOC_WM9090