2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/if_ether.h>
16 #include <linux/skbuff.h>
17 #include <linux/if_arp.h>
18 #include <linux/etherdevice.h>
19 #include <linux/moduleparam.h>
20 #include <linux/rtnetlink.h>
21 #include <linux/pm_qos.h>
22 #include <linux/crc32.h>
23 #include <linux/slab.h>
24 #include <linux/export.h>
25 #include <net/mac80211.h>
26 #include <asm/unaligned.h>
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
33 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
34 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
35 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
36 #define IEEE80211_AUTH_MAX_TRIES 3
37 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
38 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
39 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
40 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
41 #define IEEE80211_ASSOC_MAX_TRIES 3
43 static int max_nullfunc_tries
= 2;
44 module_param(max_nullfunc_tries
, int, 0644);
45 MODULE_PARM_DESC(max_nullfunc_tries
,
46 "Maximum nullfunc tx tries before disconnecting (reason 4).");
48 static int max_probe_tries
= 5;
49 module_param(max_probe_tries
, int, 0644);
50 MODULE_PARM_DESC(max_probe_tries
,
51 "Maximum probe tries before disconnecting (reason 4).");
54 * Beacon loss timeout is calculated as N frames times the
55 * advertised beacon interval. This may need to be somewhat
56 * higher than what hardware might detect to account for
57 * delays in the host processing frames. But since we also
58 * probe on beacon miss before declaring the connection lost
59 * default to what we want.
61 static int beacon_loss_count
= 7;
62 module_param(beacon_loss_count
, int, 0644);
63 MODULE_PARM_DESC(beacon_loss_count
,
64 "Number of beacon intervals before we decide beacon was lost.");
67 * Time the connection can be idle before we probe
68 * it to see if we can still talk to the AP.
70 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
72 * Time we wait for a probe response after sending
73 * a probe request because of beacon loss or for
74 * checking the connection still works.
76 static int probe_wait_ms
= 500;
77 module_param(probe_wait_ms
, int, 0644);
78 MODULE_PARM_DESC(probe_wait_ms
,
79 "Maximum time(ms) to wait for probe response"
80 " before disconnecting (reason 4).");
83 * Weight given to the latest Beacon frame when calculating average signal
84 * strength for Beacon frames received in the current BSS. This must be
87 #define IEEE80211_SIGNAL_AVE_WEIGHT 3
90 * How many Beacon frames need to have been used in average signal strength
91 * before starting to indicate signal change events.
93 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
96 * We can have multiple work items (and connection probing)
97 * scheduling this timer, but we need to take care to only
98 * reschedule it when it should fire _earlier_ than it was
99 * asked for before, or if it's not pending right now. This
100 * function ensures that. Note that it then is required to
101 * run this function for all timeouts after the first one
102 * has happened -- the work that runs from this timer will
105 static void run_again(struct ieee80211_sub_if_data
*sdata
,
106 unsigned long timeout
)
108 sdata_assert_lock(sdata
);
110 if (!timer_pending(&sdata
->u
.mgd
.timer
) ||
111 time_before(timeout
, sdata
->u
.mgd
.timer
.expires
))
112 mod_timer(&sdata
->u
.mgd
.timer
, timeout
);
115 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data
*sdata
)
117 if (sdata
->vif
.driver_flags
& IEEE80211_VIF_BEACON_FILTER
)
120 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
123 mod_timer(&sdata
->u
.mgd
.bcn_mon_timer
,
124 round_jiffies_up(jiffies
+ sdata
->u
.mgd
.beacon_timeout
));
127 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data
*sdata
)
129 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
131 if (unlikely(!sdata
->u
.mgd
.associated
))
134 ifmgd
->probe_send_count
= 0;
136 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
139 mod_timer(&sdata
->u
.mgd
.conn_mon_timer
,
140 round_jiffies_up(jiffies
+ IEEE80211_CONNECTION_IDLE_TIME
));
143 static int ecw2cw(int ecw
)
145 return (1 << ecw
) - 1;
149 ieee80211_determine_chantype(struct ieee80211_sub_if_data
*sdata
,
150 struct ieee80211_supported_band
*sband
,
151 struct ieee80211_channel
*channel
,
152 const struct ieee80211_ht_operation
*ht_oper
,
153 const struct ieee80211_vht_operation
*vht_oper
,
154 struct cfg80211_chan_def
*chandef
, bool tracking
)
156 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
157 struct cfg80211_chan_def vht_chandef
;
160 chandef
->chan
= channel
;
161 chandef
->width
= NL80211_CHAN_WIDTH_20_NOHT
;
162 chandef
->center_freq1
= channel
->center_freq
;
163 chandef
->center_freq2
= 0;
165 if (!ht_oper
|| !sband
->ht_cap
.ht_supported
) {
166 ret
= IEEE80211_STA_DISABLE_HT
| IEEE80211_STA_DISABLE_VHT
;
170 chandef
->width
= NL80211_CHAN_WIDTH_20
;
172 ht_cfreq
= ieee80211_channel_to_frequency(ht_oper
->primary_chan
,
174 /* check that channel matches the right operating channel */
175 if (!tracking
&& channel
->center_freq
!= ht_cfreq
) {
177 * It's possible that some APs are confused here;
178 * Netgear WNDR3700 sometimes reports 4 higher than
179 * the actual channel in association responses, but
180 * since we look at probe response/beacon data here
184 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
185 channel
->center_freq
, ht_cfreq
,
186 ht_oper
->primary_chan
, channel
->band
);
187 ret
= IEEE80211_STA_DISABLE_HT
| IEEE80211_STA_DISABLE_VHT
;
191 /* check 40 MHz support, if we have it */
192 if (sband
->ht_cap
.cap
& IEEE80211_HT_CAP_SUP_WIDTH_20_40
) {
193 switch (ht_oper
->ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
194 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
195 chandef
->width
= NL80211_CHAN_WIDTH_40
;
196 chandef
->center_freq1
+= 10;
198 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
199 chandef
->width
= NL80211_CHAN_WIDTH_40
;
200 chandef
->center_freq1
-= 10;
204 /* 40 MHz (and 80 MHz) must be supported for VHT */
205 ret
= IEEE80211_STA_DISABLE_VHT
;
206 /* also mark 40 MHz disabled */
207 ret
|= IEEE80211_STA_DISABLE_40MHZ
;
211 if (!vht_oper
|| !sband
->vht_cap
.vht_supported
) {
212 ret
= IEEE80211_STA_DISABLE_VHT
;
216 vht_chandef
.chan
= channel
;
217 vht_chandef
.center_freq1
=
218 ieee80211_channel_to_frequency(vht_oper
->center_freq_seg1_idx
,
220 vht_chandef
.center_freq2
= 0;
222 switch (vht_oper
->chan_width
) {
223 case IEEE80211_VHT_CHANWIDTH_USE_HT
:
224 vht_chandef
.width
= chandef
->width
;
225 vht_chandef
.center_freq1
= chandef
->center_freq1
;
227 case IEEE80211_VHT_CHANWIDTH_80MHZ
:
228 vht_chandef
.width
= NL80211_CHAN_WIDTH_80
;
230 case IEEE80211_VHT_CHANWIDTH_160MHZ
:
231 vht_chandef
.width
= NL80211_CHAN_WIDTH_160
;
233 case IEEE80211_VHT_CHANWIDTH_80P80MHZ
:
234 vht_chandef
.width
= NL80211_CHAN_WIDTH_80P80
;
235 vht_chandef
.center_freq2
=
236 ieee80211_channel_to_frequency(
237 vht_oper
->center_freq_seg2_idx
,
241 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
243 "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
244 vht_oper
->chan_width
);
245 ret
= IEEE80211_STA_DISABLE_VHT
;
249 if (!cfg80211_chandef_valid(&vht_chandef
)) {
250 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
252 "AP VHT information is invalid, disable VHT\n");
253 ret
= IEEE80211_STA_DISABLE_VHT
;
257 if (cfg80211_chandef_identical(chandef
, &vht_chandef
)) {
262 if (!cfg80211_chandef_compatible(chandef
, &vht_chandef
)) {
263 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
265 "AP VHT information doesn't match HT, disable VHT\n");
266 ret
= IEEE80211_STA_DISABLE_VHT
;
270 *chandef
= vht_chandef
;
276 * When tracking the current AP, don't do any further checks if the
277 * new chandef is identical to the one we're currently using for the
278 * connection. This keeps us from playing ping-pong with regulatory,
279 * without it the following can happen (for example):
280 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
281 * - AP advertises regdom US
282 * - CRDA loads regdom US with 80 MHz prohibited (old database)
283 * - the code below detects an unsupported channel, downgrades, and
284 * we disconnect from the AP in the caller
285 * - disconnect causes CRDA to reload world regdomain and the game
287 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
289 * It seems possible that there are still scenarios with CSA or real
290 * bandwidth changes where a this could happen, but those cases are
291 * less common and wouldn't completely prevent using the AP.
294 cfg80211_chandef_identical(chandef
, &sdata
->vif
.bss_conf
.chandef
))
297 /* don't print the message below for VHT mismatch if VHT is disabled */
298 if (ret
& IEEE80211_STA_DISABLE_VHT
)
299 vht_chandef
= *chandef
;
302 * Ignore the DISABLED flag when we're already connected and only
303 * tracking the APs beacon for bandwidth changes - otherwise we
304 * might get disconnected here if we connect to an AP, update our
305 * regulatory information based on the AP's country IE and the
306 * information we have is wrong/outdated and disables the channel
307 * that we're actually using for the connection to the AP.
309 while (!cfg80211_chandef_usable(sdata
->local
->hw
.wiphy
, chandef
,
311 IEEE80211_CHAN_DISABLED
)) {
312 if (WARN_ON(chandef
->width
== NL80211_CHAN_WIDTH_20_NOHT
)) {
313 ret
= IEEE80211_STA_DISABLE_HT
|
314 IEEE80211_STA_DISABLE_VHT
;
318 ret
|= ieee80211_chandef_downgrade(chandef
);
321 if (chandef
->width
!= vht_chandef
.width
&& !tracking
)
323 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
325 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef
));
329 static int ieee80211_config_bw(struct ieee80211_sub_if_data
*sdata
,
330 struct sta_info
*sta
,
331 const struct ieee80211_ht_operation
*ht_oper
,
332 const struct ieee80211_vht_operation
*vht_oper
,
333 const u8
*bssid
, u32
*changed
)
335 struct ieee80211_local
*local
= sdata
->local
;
336 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
337 struct ieee80211_supported_band
*sband
;
338 struct ieee80211_channel
*chan
;
339 struct cfg80211_chan_def chandef
;
342 enum ieee80211_sta_rx_bandwidth new_sta_bw
;
345 /* if HT was/is disabled, don't track any bandwidth changes */
346 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
|| !ht_oper
)
349 /* don't check VHT if we associated as non-VHT station */
350 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)
353 if (WARN_ON_ONCE(!sta
))
357 * if bss configuration changed store the new one -
358 * this may be applicable even if channel is identical
360 ht_opmode
= le16_to_cpu(ht_oper
->operation_mode
);
361 if (sdata
->vif
.bss_conf
.ht_operation_mode
!= ht_opmode
) {
362 *changed
|= BSS_CHANGED_HT
;
363 sdata
->vif
.bss_conf
.ht_operation_mode
= ht_opmode
;
366 chan
= sdata
->vif
.bss_conf
.chandef
.chan
;
367 sband
= local
->hw
.wiphy
->bands
[chan
->band
];
369 /* calculate new channel (type) based on HT/VHT operation IEs */
370 flags
= ieee80211_determine_chantype(sdata
, sband
, chan
, ht_oper
,
371 vht_oper
, &chandef
, true);
374 * Downgrade the new channel if we associated with restricted
375 * capabilities. For example, if we associated as a 20 MHz STA
376 * to a 40 MHz AP (due to regulatory, capabilities or config
377 * reasons) then switching to a 40 MHz channel now won't do us
378 * any good -- we couldn't use it with the AP.
380 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_80P80MHZ
&&
381 chandef
.width
== NL80211_CHAN_WIDTH_80P80
)
382 flags
|= ieee80211_chandef_downgrade(&chandef
);
383 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_160MHZ
&&
384 chandef
.width
== NL80211_CHAN_WIDTH_160
)
385 flags
|= ieee80211_chandef_downgrade(&chandef
);
386 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_40MHZ
&&
387 chandef
.width
> NL80211_CHAN_WIDTH_20
)
388 flags
|= ieee80211_chandef_downgrade(&chandef
);
390 if (cfg80211_chandef_identical(&chandef
, &sdata
->vif
.bss_conf
.chandef
))
394 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
395 ifmgd
->bssid
, chandef
.chan
->center_freq
, chandef
.width
,
396 chandef
.center_freq1
, chandef
.center_freq2
);
398 if (flags
!= (ifmgd
->flags
& (IEEE80211_STA_DISABLE_HT
|
399 IEEE80211_STA_DISABLE_VHT
|
400 IEEE80211_STA_DISABLE_40MHZ
|
401 IEEE80211_STA_DISABLE_80P80MHZ
|
402 IEEE80211_STA_DISABLE_160MHZ
)) ||
403 !cfg80211_chandef_valid(&chandef
)) {
405 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
410 switch (chandef
.width
) {
411 case NL80211_CHAN_WIDTH_20_NOHT
:
412 case NL80211_CHAN_WIDTH_20
:
413 new_sta_bw
= IEEE80211_STA_RX_BW_20
;
415 case NL80211_CHAN_WIDTH_40
:
416 new_sta_bw
= IEEE80211_STA_RX_BW_40
;
418 case NL80211_CHAN_WIDTH_80
:
419 new_sta_bw
= IEEE80211_STA_RX_BW_80
;
421 case NL80211_CHAN_WIDTH_80P80
:
422 case NL80211_CHAN_WIDTH_160
:
423 new_sta_bw
= IEEE80211_STA_RX_BW_160
;
429 if (new_sta_bw
> sta
->cur_max_bandwidth
)
430 new_sta_bw
= sta
->cur_max_bandwidth
;
432 if (new_sta_bw
< sta
->sta
.bandwidth
) {
433 sta
->sta
.bandwidth
= new_sta_bw
;
434 rate_control_rate_update(local
, sband
, sta
,
435 IEEE80211_RC_BW_CHANGED
);
438 ret
= ieee80211_vif_change_bandwidth(sdata
, &chandef
, changed
);
441 "AP %pM changed bandwidth to incompatible one - disconnect\n",
446 if (new_sta_bw
> sta
->sta
.bandwidth
) {
447 sta
->sta
.bandwidth
= new_sta_bw
;
448 rate_control_rate_update(local
, sband
, sta
,
449 IEEE80211_RC_BW_CHANGED
);
455 /* frame sending functions */
457 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data
*sdata
,
458 struct sk_buff
*skb
, u8 ap_ht_param
,
459 struct ieee80211_supported_band
*sband
,
460 struct ieee80211_channel
*channel
,
461 enum ieee80211_smps_mode smps
)
464 u32 flags
= channel
->flags
;
466 struct ieee80211_sta_ht_cap ht_cap
;
468 BUILD_BUG_ON(sizeof(ht_cap
) != sizeof(sband
->ht_cap
));
470 memcpy(&ht_cap
, &sband
->ht_cap
, sizeof(ht_cap
));
471 ieee80211_apply_htcap_overrides(sdata
, &ht_cap
);
473 /* determine capability flags */
476 switch (ap_ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
477 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
478 if (flags
& IEEE80211_CHAN_NO_HT40PLUS
) {
479 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
480 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
483 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
484 if (flags
& IEEE80211_CHAN_NO_HT40MINUS
) {
485 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
486 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
492 * If 40 MHz was disabled associate as though we weren't
493 * capable of 40 MHz -- some broken APs will never fall
494 * back to trying to transmit in 20 MHz.
496 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_40MHZ
) {
497 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
498 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
501 /* set SM PS mode properly */
502 cap
&= ~IEEE80211_HT_CAP_SM_PS
;
504 case IEEE80211_SMPS_AUTOMATIC
:
505 case IEEE80211_SMPS_NUM_MODES
:
507 case IEEE80211_SMPS_OFF
:
508 cap
|= WLAN_HT_CAP_SM_PS_DISABLED
<<
509 IEEE80211_HT_CAP_SM_PS_SHIFT
;
511 case IEEE80211_SMPS_STATIC
:
512 cap
|= WLAN_HT_CAP_SM_PS_STATIC
<<
513 IEEE80211_HT_CAP_SM_PS_SHIFT
;
515 case IEEE80211_SMPS_DYNAMIC
:
516 cap
|= WLAN_HT_CAP_SM_PS_DYNAMIC
<<
517 IEEE80211_HT_CAP_SM_PS_SHIFT
;
521 /* reserve and fill IE */
522 pos
= skb_put(skb
, sizeof(struct ieee80211_ht_cap
) + 2);
523 ieee80211_ie_build_ht_cap(pos
, &ht_cap
, cap
);
526 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data
*sdata
,
528 struct ieee80211_supported_band
*sband
,
529 struct ieee80211_vht_cap
*ap_vht_cap
)
533 struct ieee80211_sta_vht_cap vht_cap
;
534 u32 mask
, ap_bf_sts
, our_bf_sts
;
536 BUILD_BUG_ON(sizeof(vht_cap
) != sizeof(sband
->vht_cap
));
538 memcpy(&vht_cap
, &sband
->vht_cap
, sizeof(vht_cap
));
539 ieee80211_apply_vhtcap_overrides(sdata
, &vht_cap
);
541 /* determine capability flags */
544 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_80P80MHZ
) {
545 cap
&= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ
;
546 cap
|= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ
;
549 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_160MHZ
) {
550 cap
&= ~IEEE80211_VHT_CAP_SHORT_GI_160
;
551 cap
&= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ
;
555 * Some APs apparently get confused if our capabilities are better
556 * than theirs, so restrict what we advertise in the assoc request.
558 if (!(ap_vht_cap
->vht_cap_info
&
559 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
)))
560 cap
&= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
;
562 mask
= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK
;
564 ap_bf_sts
= le32_to_cpu(ap_vht_cap
->vht_cap_info
) & mask
;
565 our_bf_sts
= cap
& mask
;
567 if (ap_bf_sts
< our_bf_sts
) {
572 /* reserve and fill IE */
573 pos
= skb_put(skb
, sizeof(struct ieee80211_vht_cap
) + 2);
574 ieee80211_ie_build_vht_cap(pos
, &vht_cap
, cap
);
577 static void ieee80211_send_assoc(struct ieee80211_sub_if_data
*sdata
)
579 struct ieee80211_local
*local
= sdata
->local
;
580 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
581 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
583 struct ieee80211_mgmt
*mgmt
;
585 size_t offset
= 0, noffset
;
586 int i
, count
, rates_len
, supp_rates_len
, shift
;
588 struct ieee80211_supported_band
*sband
;
589 struct ieee80211_chanctx_conf
*chanctx_conf
;
590 struct ieee80211_channel
*chan
;
591 u32 rate_flags
, rates
= 0;
593 sdata_assert_lock(sdata
);
596 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
597 if (WARN_ON(!chanctx_conf
)) {
601 chan
= chanctx_conf
->def
.chan
;
602 rate_flags
= ieee80211_chandef_rate_flags(&chanctx_conf
->def
);
604 sband
= local
->hw
.wiphy
->bands
[chan
->band
];
605 shift
= ieee80211_vif_get_shift(&sdata
->vif
);
607 if (assoc_data
->supp_rates_len
) {
609 * Get all rates supported by the device and the AP as
610 * some APs don't like getting a superset of their rates
611 * in the association request (e.g. D-Link DAP 1353 in
614 rates_len
= ieee80211_parse_bitrates(&chanctx_conf
->def
, sband
,
615 assoc_data
->supp_rates
,
616 assoc_data
->supp_rates_len
,
620 * In case AP not provide any supported rates information
621 * before association, we send information element(s) with
622 * all rates that we support.
625 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
626 if ((rate_flags
& sband
->bitrates
[i
].flags
)
634 skb
= alloc_skb(local
->hw
.extra_tx_headroom
+
635 sizeof(*mgmt
) + /* bit too much but doesn't matter */
636 2 + assoc_data
->ssid_len
+ /* SSID */
637 4 + rates_len
+ /* (extended) rates */
638 4 + /* power capability */
639 2 + 2 * sband
->n_channels
+ /* supported channels */
640 2 + sizeof(struct ieee80211_ht_cap
) + /* HT */
641 2 + sizeof(struct ieee80211_vht_cap
) + /* VHT */
642 assoc_data
->ie_len
+ /* extra IEs */
648 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
650 capab
= WLAN_CAPABILITY_ESS
;
652 if (sband
->band
== IEEE80211_BAND_2GHZ
) {
653 if (!(local
->hw
.flags
& IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE
))
654 capab
|= WLAN_CAPABILITY_SHORT_SLOT_TIME
;
655 if (!(local
->hw
.flags
& IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE
))
656 capab
|= WLAN_CAPABILITY_SHORT_PREAMBLE
;
659 if (assoc_data
->capability
& WLAN_CAPABILITY_PRIVACY
)
660 capab
|= WLAN_CAPABILITY_PRIVACY
;
662 if ((assoc_data
->capability
& WLAN_CAPABILITY_SPECTRUM_MGMT
) &&
663 (local
->hw
.flags
& IEEE80211_HW_SPECTRUM_MGMT
))
664 capab
|= WLAN_CAPABILITY_SPECTRUM_MGMT
;
666 mgmt
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
668 memcpy(mgmt
->da
, assoc_data
->bss
->bssid
, ETH_ALEN
);
669 memcpy(mgmt
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
670 memcpy(mgmt
->bssid
, assoc_data
->bss
->bssid
, ETH_ALEN
);
672 if (!is_zero_ether_addr(assoc_data
->prev_bssid
)) {
674 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
675 IEEE80211_STYPE_REASSOC_REQ
);
676 mgmt
->u
.reassoc_req
.capab_info
= cpu_to_le16(capab
);
677 mgmt
->u
.reassoc_req
.listen_interval
=
678 cpu_to_le16(local
->hw
.conf
.listen_interval
);
679 memcpy(mgmt
->u
.reassoc_req
.current_ap
, assoc_data
->prev_bssid
,
683 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
684 IEEE80211_STYPE_ASSOC_REQ
);
685 mgmt
->u
.assoc_req
.capab_info
= cpu_to_le16(capab
);
686 mgmt
->u
.assoc_req
.listen_interval
=
687 cpu_to_le16(local
->hw
.conf
.listen_interval
);
691 pos
= skb_put(skb
, 2 + assoc_data
->ssid_len
);
692 *pos
++ = WLAN_EID_SSID
;
693 *pos
++ = assoc_data
->ssid_len
;
694 memcpy(pos
, assoc_data
->ssid
, assoc_data
->ssid_len
);
696 /* add all rates which were marked to be used above */
697 supp_rates_len
= rates_len
;
698 if (supp_rates_len
> 8)
701 pos
= skb_put(skb
, supp_rates_len
+ 2);
702 *pos
++ = WLAN_EID_SUPP_RATES
;
703 *pos
++ = supp_rates_len
;
706 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
707 if (BIT(i
) & rates
) {
708 int rate
= DIV_ROUND_UP(sband
->bitrates
[i
].bitrate
,
716 if (rates_len
> count
) {
717 pos
= skb_put(skb
, rates_len
- count
+ 2);
718 *pos
++ = WLAN_EID_EXT_SUPP_RATES
;
719 *pos
++ = rates_len
- count
;
721 for (i
++; i
< sband
->n_bitrates
; i
++) {
722 if (BIT(i
) & rates
) {
724 rate
= DIV_ROUND_UP(sband
->bitrates
[i
].bitrate
,
731 if (capab
& WLAN_CAPABILITY_SPECTRUM_MGMT
) {
732 /* 1. power capabilities */
733 pos
= skb_put(skb
, 4);
734 *pos
++ = WLAN_EID_PWR_CAPABILITY
;
736 *pos
++ = 0; /* min tx power */
738 *pos
++ = ieee80211_chandef_max_power(&chanctx_conf
->def
);
740 /* 2. supported channels */
741 /* TODO: get this in reg domain format */
742 pos
= skb_put(skb
, 2 * sband
->n_channels
+ 2);
743 *pos
++ = WLAN_EID_SUPPORTED_CHANNELS
;
744 *pos
++ = 2 * sband
->n_channels
;
745 for (i
= 0; i
< sband
->n_channels
; i
++) {
746 *pos
++ = ieee80211_frequency_to_channel(
747 sband
->channels
[i
].center_freq
);
748 *pos
++ = 1; /* one channel in the subband*/
752 /* if present, add any custom IEs that go before HT */
753 if (assoc_data
->ie_len
) {
754 static const u8 before_ht
[] = {
757 WLAN_EID_EXT_SUPP_RATES
,
758 WLAN_EID_PWR_CAPABILITY
,
759 WLAN_EID_SUPPORTED_CHANNELS
,
762 WLAN_EID_RRM_ENABLED_CAPABILITIES
,
763 WLAN_EID_MOBILITY_DOMAIN
,
764 WLAN_EID_SUPPORTED_REGULATORY_CLASSES
,
766 noffset
= ieee80211_ie_split(assoc_data
->ie
, assoc_data
->ie_len
,
767 before_ht
, ARRAY_SIZE(before_ht
),
769 pos
= skb_put(skb
, noffset
- offset
);
770 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
774 if (WARN_ON_ONCE((ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
775 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)))
776 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
778 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
))
779 ieee80211_add_ht_ie(sdata
, skb
, assoc_data
->ap_ht_param
,
780 sband
, chan
, sdata
->smps_mode
);
782 /* if present, add any custom IEs that go before VHT */
783 if (assoc_data
->ie_len
) {
784 static const u8 before_vht
[] = {
787 WLAN_EID_EXT_SUPP_RATES
,
788 WLAN_EID_PWR_CAPABILITY
,
789 WLAN_EID_SUPPORTED_CHANNELS
,
792 WLAN_EID_RRM_ENABLED_CAPABILITIES
,
793 WLAN_EID_MOBILITY_DOMAIN
,
794 WLAN_EID_SUPPORTED_REGULATORY_CLASSES
,
795 WLAN_EID_HT_CAPABILITY
,
796 WLAN_EID_BSS_COEX_2040
,
797 WLAN_EID_EXT_CAPABILITY
,
798 WLAN_EID_QOS_TRAFFIC_CAPA
,
799 WLAN_EID_TIM_BCAST_REQ
,
800 WLAN_EID_INTERWORKING
,
802 noffset
= ieee80211_ie_split(assoc_data
->ie
, assoc_data
->ie_len
,
803 before_vht
, ARRAY_SIZE(before_vht
),
805 pos
= skb_put(skb
, noffset
- offset
);
806 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
810 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
811 ieee80211_add_vht_ie(sdata
, skb
, sband
,
812 &assoc_data
->ap_vht_cap
);
814 /* if present, add any custom non-vendor IEs that go after HT */
815 if (assoc_data
->ie_len
) {
816 noffset
= ieee80211_ie_split_vendor(assoc_data
->ie
,
819 pos
= skb_put(skb
, noffset
- offset
);
820 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
824 if (assoc_data
->wmm
) {
825 if (assoc_data
->uapsd
) {
826 qos_info
= ifmgd
->uapsd_queues
;
827 qos_info
|= (ifmgd
->uapsd_max_sp_len
<<
828 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT
);
833 pos
= ieee80211_add_wmm_info_ie(skb_put(skb
, 9), qos_info
);
836 /* add any remaining custom (i.e. vendor specific here) IEs */
837 if (assoc_data
->ie_len
) {
838 noffset
= assoc_data
->ie_len
;
839 pos
= skb_put(skb
, noffset
- offset
);
840 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
843 drv_mgd_prepare_tx(local
, sdata
);
845 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
846 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
847 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_REQ_TX_STATUS
|
848 IEEE80211_TX_INTFL_MLME_CONN_TX
;
849 ieee80211_tx_skb(sdata
, skb
);
852 void ieee80211_send_pspoll(struct ieee80211_local
*local
,
853 struct ieee80211_sub_if_data
*sdata
)
855 struct ieee80211_pspoll
*pspoll
;
858 skb
= ieee80211_pspoll_get(&local
->hw
, &sdata
->vif
);
862 pspoll
= (struct ieee80211_pspoll
*) skb
->data
;
863 pspoll
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
865 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
866 ieee80211_tx_skb(sdata
, skb
);
869 void ieee80211_send_nullfunc(struct ieee80211_local
*local
,
870 struct ieee80211_sub_if_data
*sdata
,
874 struct ieee80211_hdr_3addr
*nullfunc
;
875 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
877 skb
= ieee80211_nullfunc_get(&local
->hw
, &sdata
->vif
);
881 nullfunc
= (struct ieee80211_hdr_3addr
*) skb
->data
;
883 nullfunc
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
885 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
|
886 IEEE80211_TX_INTFL_OFFCHAN_TX_OK
;
888 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
889 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_REQ_TX_STATUS
;
891 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
892 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_USE_MINRATE
;
894 ieee80211_tx_skb(sdata
, skb
);
897 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local
*local
,
898 struct ieee80211_sub_if_data
*sdata
)
901 struct ieee80211_hdr
*nullfunc
;
904 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
907 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ 30);
911 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
913 nullfunc
= (struct ieee80211_hdr
*) skb_put(skb
, 30);
914 memset(nullfunc
, 0, 30);
915 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_NULLFUNC
|
916 IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
917 nullfunc
->frame_control
= fc
;
918 memcpy(nullfunc
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
919 memcpy(nullfunc
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
920 memcpy(nullfunc
->addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
921 memcpy(nullfunc
->addr4
, sdata
->vif
.addr
, ETH_ALEN
);
923 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
924 ieee80211_tx_skb(sdata
, skb
);
927 /* spectrum management related things */
928 static void ieee80211_chswitch_work(struct work_struct
*work
)
930 struct ieee80211_sub_if_data
*sdata
=
931 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.chswitch_work
);
932 struct ieee80211_local
*local
= sdata
->local
;
933 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
936 if (!ieee80211_sdata_running(sdata
))
940 mutex_lock(&local
->mtx
);
941 mutex_lock(&local
->chanctx_mtx
);
943 if (!ifmgd
->associated
)
946 if (!sdata
->vif
.csa_active
)
950 * using reservation isn't immediate as it may be deferred until later
951 * with multi-vif. once reservation is complete it will re-schedule the
952 * work with no reserved_chanctx so verify chandef to check if it
953 * completed successfully
956 if (sdata
->reserved_chanctx
) {
958 * with multi-vif csa driver may call ieee80211_csa_finish()
959 * many times while waiting for other interfaces to use their
962 if (sdata
->reserved_ready
)
965 ret
= ieee80211_vif_use_reserved_context(sdata
);
968 "failed to use reserved channel context, disconnecting (err=%d)\n",
970 ieee80211_queue_work(&sdata
->local
->hw
,
971 &ifmgd
->csa_connection_drop_work
);
978 if (!cfg80211_chandef_identical(&sdata
->vif
.bss_conf
.chandef
,
979 &sdata
->csa_chandef
)) {
981 "failed to finalize channel switch, disconnecting\n");
982 ieee80211_queue_work(&sdata
->local
->hw
,
983 &ifmgd
->csa_connection_drop_work
);
987 /* XXX: shouldn't really modify cfg80211-owned data! */
988 ifmgd
->associated
->channel
= sdata
->csa_chandef
.chan
;
990 sdata
->vif
.csa_active
= false;
992 /* XXX: wait for a beacon first? */
993 if (sdata
->csa_block_tx
) {
994 ieee80211_wake_vif_queues(local
, sdata
,
995 IEEE80211_QUEUE_STOP_REASON_CSA
);
996 sdata
->csa_block_tx
= false;
999 ieee80211_sta_reset_beacon_monitor(sdata
);
1000 ieee80211_sta_reset_conn_monitor(sdata
);
1003 mutex_unlock(&local
->chanctx_mtx
);
1004 mutex_unlock(&local
->mtx
);
1005 sdata_unlock(sdata
);
1008 void ieee80211_chswitch_done(struct ieee80211_vif
*vif
, bool success
)
1010 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
1011 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1013 trace_api_chswitch_done(sdata
, success
);
1016 "driver channel switch failed, disconnecting\n");
1017 ieee80211_queue_work(&sdata
->local
->hw
,
1018 &ifmgd
->csa_connection_drop_work
);
1020 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
1023 EXPORT_SYMBOL(ieee80211_chswitch_done
);
1025 static void ieee80211_chswitch_timer(unsigned long data
)
1027 struct ieee80211_sub_if_data
*sdata
=
1028 (struct ieee80211_sub_if_data
*) data
;
1030 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->u
.mgd
.chswitch_work
);
1034 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data
*sdata
,
1035 u64 timestamp
, struct ieee802_11_elems
*elems
,
1038 struct ieee80211_local
*local
= sdata
->local
;
1039 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1040 struct cfg80211_bss
*cbss
= ifmgd
->associated
;
1041 struct ieee80211_chanctx_conf
*conf
;
1042 struct ieee80211_chanctx
*chanctx
;
1043 enum ieee80211_band current_band
;
1044 struct ieee80211_csa_ie csa_ie
;
1047 sdata_assert_lock(sdata
);
1052 if (local
->scanning
)
1055 /* disregard subsequent announcements if we are already processing */
1056 if (sdata
->vif
.csa_active
)
1059 current_band
= cbss
->channel
->band
;
1060 memset(&csa_ie
, 0, sizeof(csa_ie
));
1061 res
= ieee80211_parse_ch_switch_ie(sdata
, elems
, beacon
, current_band
,
1063 ifmgd
->associated
->bssid
, &csa_ie
);
1065 ieee80211_queue_work(&local
->hw
,
1066 &ifmgd
->csa_connection_drop_work
);
1070 if (!cfg80211_chandef_usable(local
->hw
.wiphy
, &csa_ie
.chandef
,
1071 IEEE80211_CHAN_DISABLED
)) {
1073 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1074 ifmgd
->associated
->bssid
,
1075 csa_ie
.chandef
.chan
->center_freq
,
1076 csa_ie
.chandef
.width
, csa_ie
.chandef
.center_freq1
,
1077 csa_ie
.chandef
.center_freq2
);
1078 ieee80211_queue_work(&local
->hw
,
1079 &ifmgd
->csa_connection_drop_work
);
1083 mutex_lock(&local
->mtx
);
1084 mutex_lock(&local
->chanctx_mtx
);
1085 conf
= rcu_dereference_protected(sdata
->vif
.chanctx_conf
,
1086 lockdep_is_held(&local
->chanctx_mtx
));
1089 "no channel context assigned to vif?, disconnecting\n");
1090 ieee80211_queue_work(&local
->hw
,
1091 &ifmgd
->csa_connection_drop_work
);
1092 mutex_unlock(&local
->chanctx_mtx
);
1093 mutex_unlock(&local
->mtx
);
1097 chanctx
= container_of(conf
, struct ieee80211_chanctx
, conf
);
1099 if (local
->use_chanctx
) {
1100 u32 num_chanctx
= 0;
1101 list_for_each_entry(chanctx
, &local
->chanctx_list
, list
)
1104 if (num_chanctx
> 1 ||
1105 !(local
->hw
.flags
& IEEE80211_HW_CHANCTX_STA_CSA
)) {
1107 "not handling chan-switch with channel contexts\n");
1108 ieee80211_queue_work(&local
->hw
,
1109 &ifmgd
->csa_connection_drop_work
);
1110 mutex_unlock(&local
->chanctx_mtx
);
1111 mutex_unlock(&local
->mtx
);
1116 res
= ieee80211_vif_reserve_chanctx(sdata
, &csa_ie
.chandef
,
1117 chanctx
->mode
, false);
1120 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1122 ieee80211_queue_work(&local
->hw
,
1123 &ifmgd
->csa_connection_drop_work
);
1124 mutex_unlock(&local
->chanctx_mtx
);
1125 mutex_unlock(&local
->mtx
);
1128 mutex_unlock(&local
->chanctx_mtx
);
1130 sdata
->vif
.csa_active
= true;
1131 sdata
->csa_chandef
= csa_ie
.chandef
;
1132 sdata
->csa_block_tx
= csa_ie
.mode
;
1134 if (sdata
->csa_block_tx
)
1135 ieee80211_stop_vif_queues(local
, sdata
,
1136 IEEE80211_QUEUE_STOP_REASON_CSA
);
1137 mutex_unlock(&local
->mtx
);
1139 if (local
->ops
->channel_switch
) {
1140 /* use driver's channel switch callback */
1141 struct ieee80211_channel_switch ch_switch
= {
1142 .timestamp
= timestamp
,
1143 .block_tx
= csa_ie
.mode
,
1144 .chandef
= csa_ie
.chandef
,
1145 .count
= csa_ie
.count
,
1148 drv_channel_switch(local
, &ch_switch
);
1152 /* channel switch handled in software */
1153 if (csa_ie
.count
<= 1)
1154 ieee80211_queue_work(&local
->hw
, &ifmgd
->chswitch_work
);
1156 mod_timer(&ifmgd
->chswitch_timer
,
1157 TU_TO_EXP_TIME(csa_ie
.count
* cbss
->beacon_interval
));
1160 static u32
ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data
*sdata
,
1161 struct ieee80211_channel
*channel
,
1162 const u8
*country_ie
, u8 country_ie_len
,
1163 const u8
*pwr_constr_elem
)
1165 struct ieee80211_country_ie_triplet
*triplet
;
1166 int chan
= ieee80211_frequency_to_channel(channel
->center_freq
);
1167 int i
, chan_pwr
, chan_increment
, new_ap_level
;
1168 bool have_chan_pwr
= false;
1171 if (country_ie_len
% 2 || country_ie_len
< IEEE80211_COUNTRY_IE_MIN_LEN
)
1174 triplet
= (void *)(country_ie
+ 3);
1175 country_ie_len
-= 3;
1177 switch (channel
->band
) {
1181 case IEEE80211_BAND_2GHZ
:
1182 case IEEE80211_BAND_60GHZ
:
1185 case IEEE80211_BAND_5GHZ
:
1191 while (country_ie_len
>= 3) {
1192 u8 first_channel
= triplet
->chans
.first_channel
;
1194 if (first_channel
>= IEEE80211_COUNTRY_EXTENSION_ID
)
1197 for (i
= 0; i
< triplet
->chans
.num_channels
; i
++) {
1198 if (first_channel
+ i
* chan_increment
== chan
) {
1199 have_chan_pwr
= true;
1200 chan_pwr
= triplet
->chans
.max_power
;
1209 country_ie_len
-= 3;
1215 new_ap_level
= max_t(int, 0, chan_pwr
- *pwr_constr_elem
);
1217 if (sdata
->ap_power_level
== new_ap_level
)
1221 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1222 new_ap_level
, chan_pwr
, *pwr_constr_elem
,
1223 sdata
->u
.mgd
.bssid
);
1224 sdata
->ap_power_level
= new_ap_level
;
1225 if (__ieee80211_recalc_txpower(sdata
))
1226 return BSS_CHANGED_TXPOWER
;
1231 static void ieee80211_enable_ps(struct ieee80211_local
*local
,
1232 struct ieee80211_sub_if_data
*sdata
)
1234 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
1237 * If we are scanning right now then the parameters will
1238 * take effect when scan finishes.
1240 if (local
->scanning
)
1243 if (conf
->dynamic_ps_timeout
> 0 &&
1244 !(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_PS
)) {
1245 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1246 msecs_to_jiffies(conf
->dynamic_ps_timeout
));
1248 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
1249 ieee80211_send_nullfunc(local
, sdata
, 1);
1251 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
1252 (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
))
1255 conf
->flags
|= IEEE80211_CONF_PS
;
1256 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1260 static void ieee80211_change_ps(struct ieee80211_local
*local
)
1262 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
1264 if (local
->ps_sdata
) {
1265 ieee80211_enable_ps(local
, local
->ps_sdata
);
1266 } else if (conf
->flags
& IEEE80211_CONF_PS
) {
1267 conf
->flags
&= ~IEEE80211_CONF_PS
;
1268 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1269 del_timer_sync(&local
->dynamic_ps_timer
);
1270 cancel_work_sync(&local
->dynamic_ps_enable_work
);
1274 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data
*sdata
)
1276 struct ieee80211_if_managed
*mgd
= &sdata
->u
.mgd
;
1277 struct sta_info
*sta
= NULL
;
1278 bool authorized
= false;
1280 if (!mgd
->powersave
)
1286 if (!mgd
->associated
)
1289 if (mgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
1292 if (!mgd
->have_beacon
)
1296 sta
= sta_info_get(sdata
, mgd
->bssid
);
1298 authorized
= test_sta_flag(sta
, WLAN_STA_AUTHORIZED
);
1304 /* need to hold RTNL or interface lock */
1305 void ieee80211_recalc_ps(struct ieee80211_local
*local
, s32 latency
)
1307 struct ieee80211_sub_if_data
*sdata
, *found
= NULL
;
1311 if (!(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_PS
)) {
1312 local
->ps_sdata
= NULL
;
1316 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
1317 if (!ieee80211_sdata_running(sdata
))
1319 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
1320 /* If an AP vif is found, then disable PS
1321 * by setting the count to zero thereby setting
1327 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1333 if (count
== 1 && ieee80211_powersave_allowed(found
)) {
1337 latency
= pm_qos_request(PM_QOS_NETWORK_LATENCY
);
1339 beaconint_us
= ieee80211_tu_to_usec(
1340 found
->vif
.bss_conf
.beacon_int
);
1342 timeout
= local
->dynamic_ps_forced_timeout
;
1345 * Go to full PSM if the user configures a very low
1346 * latency requirement.
1347 * The 2000 second value is there for compatibility
1348 * until the PM_QOS_NETWORK_LATENCY is configured
1351 if (latency
> (1900 * USEC_PER_MSEC
) &&
1352 latency
!= (2000 * USEC_PER_SEC
))
1357 local
->hw
.conf
.dynamic_ps_timeout
= timeout
;
1359 if (beaconint_us
> latency
) {
1360 local
->ps_sdata
= NULL
;
1363 u8 dtimper
= found
->u
.mgd
.dtim_period
;
1365 /* If the TIM IE is invalid, pretend the value is 1 */
1368 else if (dtimper
> 1)
1369 maxslp
= min_t(int, dtimper
,
1370 latency
/ beaconint_us
);
1372 local
->hw
.conf
.max_sleep_period
= maxslp
;
1373 local
->hw
.conf
.ps_dtim_period
= dtimper
;
1374 local
->ps_sdata
= found
;
1377 local
->ps_sdata
= NULL
;
1380 ieee80211_change_ps(local
);
1383 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data
*sdata
)
1385 bool ps_allowed
= ieee80211_powersave_allowed(sdata
);
1387 if (sdata
->vif
.bss_conf
.ps
!= ps_allowed
) {
1388 sdata
->vif
.bss_conf
.ps
= ps_allowed
;
1389 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_PS
);
1393 void ieee80211_dynamic_ps_disable_work(struct work_struct
*work
)
1395 struct ieee80211_local
*local
=
1396 container_of(work
, struct ieee80211_local
,
1397 dynamic_ps_disable_work
);
1399 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
1400 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1401 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1404 ieee80211_wake_queues_by_reason(&local
->hw
,
1405 IEEE80211_MAX_QUEUE_MAP
,
1406 IEEE80211_QUEUE_STOP_REASON_PS
,
1410 void ieee80211_dynamic_ps_enable_work(struct work_struct
*work
)
1412 struct ieee80211_local
*local
=
1413 container_of(work
, struct ieee80211_local
,
1414 dynamic_ps_enable_work
);
1415 struct ieee80211_sub_if_data
*sdata
= local
->ps_sdata
;
1416 struct ieee80211_if_managed
*ifmgd
;
1417 unsigned long flags
;
1420 /* can only happen when PS was just disabled anyway */
1424 ifmgd
= &sdata
->u
.mgd
;
1426 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
)
1429 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
1430 /* don't enter PS if TX frames are pending */
1431 if (drv_tx_frames_pending(local
)) {
1432 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1434 local
->hw
.conf
.dynamic_ps_timeout
));
1439 * transmission can be stopped by others which leads to
1440 * dynamic_ps_timer expiry. Postpone the ps timer if it
1441 * is not the actual idle state.
1443 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
1444 for (q
= 0; q
< local
->hw
.queues
; q
++) {
1445 if (local
->queue_stop_reasons
[q
]) {
1446 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
,
1448 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1450 local
->hw
.conf
.dynamic_ps_timeout
));
1454 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
1457 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
1458 !(ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)) {
1459 if (drv_tx_frames_pending(local
)) {
1460 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1462 local
->hw
.conf
.dynamic_ps_timeout
));
1464 ieee80211_send_nullfunc(local
, sdata
, 1);
1465 /* Flush to get the tx status of nullfunc frame */
1466 ieee80211_flush_queues(local
, sdata
);
1470 if (!((local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) &&
1471 (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)) ||
1472 (ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)) {
1473 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
1474 local
->hw
.conf
.flags
|= IEEE80211_CONF_PS
;
1475 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1479 void ieee80211_dynamic_ps_timer(unsigned long data
)
1481 struct ieee80211_local
*local
= (void *) data
;
1483 if (local
->quiescing
|| local
->suspended
)
1486 ieee80211_queue_work(&local
->hw
, &local
->dynamic_ps_enable_work
);
1489 void ieee80211_dfs_cac_timer_work(struct work_struct
*work
)
1491 struct delayed_work
*delayed_work
=
1492 container_of(work
, struct delayed_work
, work
);
1493 struct ieee80211_sub_if_data
*sdata
=
1494 container_of(delayed_work
, struct ieee80211_sub_if_data
,
1495 dfs_cac_timer_work
);
1496 struct cfg80211_chan_def chandef
= sdata
->vif
.bss_conf
.chandef
;
1498 mutex_lock(&sdata
->local
->mtx
);
1499 if (sdata
->wdev
.cac_started
) {
1500 ieee80211_vif_release_channel(sdata
);
1501 cfg80211_cac_event(sdata
->dev
, &chandef
,
1502 NL80211_RADAR_CAC_FINISHED
,
1505 mutex_unlock(&sdata
->local
->mtx
);
1509 static bool ieee80211_sta_wmm_params(struct ieee80211_local
*local
,
1510 struct ieee80211_sub_if_data
*sdata
,
1511 const u8
*wmm_param
, size_t wmm_param_len
)
1513 struct ieee80211_tx_queue_params params
;
1514 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1518 u8 uapsd_queues
= 0;
1520 if (!local
->ops
->conf_tx
)
1523 if (local
->hw
.queues
< IEEE80211_NUM_ACS
)
1529 if (wmm_param_len
< 8 || wmm_param
[5] /* version */ != 1)
1532 if (ifmgd
->flags
& IEEE80211_STA_UAPSD_ENABLED
)
1533 uapsd_queues
= ifmgd
->uapsd_queues
;
1535 count
= wmm_param
[6] & 0x0f;
1536 if (count
== ifmgd
->wmm_last_param_set
)
1538 ifmgd
->wmm_last_param_set
= count
;
1540 pos
= wmm_param
+ 8;
1541 left
= wmm_param_len
- 8;
1543 memset(¶ms
, 0, sizeof(params
));
1546 for (; left
>= 4; left
-= 4, pos
+= 4) {
1547 int aci
= (pos
[0] >> 5) & 0x03;
1548 int acm
= (pos
[0] >> 4) & 0x01;
1556 sdata
->wmm_acm
|= BIT(1) | BIT(2); /* BK/- */
1557 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BK
)
1563 sdata
->wmm_acm
|= BIT(4) | BIT(5); /* CL/VI */
1564 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VI
)
1570 sdata
->wmm_acm
|= BIT(6) | BIT(7); /* VO/NC */
1571 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
)
1578 sdata
->wmm_acm
|= BIT(0) | BIT(3); /* BE/EE */
1579 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BE
)
1584 params
.aifs
= pos
[0] & 0x0f;
1585 params
.cw_max
= ecw2cw((pos
[1] & 0xf0) >> 4);
1586 params
.cw_min
= ecw2cw(pos
[1] & 0x0f);
1587 params
.txop
= get_unaligned_le16(pos
+ 2);
1589 params
.uapsd
= uapsd
;
1592 "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
1594 params
.aifs
, params
.cw_min
, params
.cw_max
,
1595 params
.txop
, params
.uapsd
);
1596 sdata
->tx_conf
[queue
] = params
;
1597 if (drv_conf_tx(local
, sdata
, queue
, ¶ms
))
1599 "failed to set TX queue parameters for queue %d\n",
1603 /* enable WMM or activate new settings */
1604 sdata
->vif
.bss_conf
.qos
= true;
1608 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data
*sdata
)
1610 lockdep_assert_held(&sdata
->local
->mtx
);
1612 sdata
->u
.mgd
.flags
&= ~IEEE80211_STA_CONNECTION_POLL
;
1613 ieee80211_run_deferred_scan(sdata
->local
);
1616 static void ieee80211_stop_poll(struct ieee80211_sub_if_data
*sdata
)
1618 mutex_lock(&sdata
->local
->mtx
);
1619 __ieee80211_stop_poll(sdata
);
1620 mutex_unlock(&sdata
->local
->mtx
);
1623 static u32
ieee80211_handle_bss_capability(struct ieee80211_sub_if_data
*sdata
,
1624 u16 capab
, bool erp_valid
, u8 erp
)
1626 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1628 bool use_protection
;
1629 bool use_short_preamble
;
1630 bool use_short_slot
;
1633 use_protection
= (erp
& WLAN_ERP_USE_PROTECTION
) != 0;
1634 use_short_preamble
= (erp
& WLAN_ERP_BARKER_PREAMBLE
) == 0;
1636 use_protection
= false;
1637 use_short_preamble
= !!(capab
& WLAN_CAPABILITY_SHORT_PREAMBLE
);
1640 use_short_slot
= !!(capab
& WLAN_CAPABILITY_SHORT_SLOT_TIME
);
1641 if (ieee80211_get_sdata_band(sdata
) == IEEE80211_BAND_5GHZ
)
1642 use_short_slot
= true;
1644 if (use_protection
!= bss_conf
->use_cts_prot
) {
1645 bss_conf
->use_cts_prot
= use_protection
;
1646 changed
|= BSS_CHANGED_ERP_CTS_PROT
;
1649 if (use_short_preamble
!= bss_conf
->use_short_preamble
) {
1650 bss_conf
->use_short_preamble
= use_short_preamble
;
1651 changed
|= BSS_CHANGED_ERP_PREAMBLE
;
1654 if (use_short_slot
!= bss_conf
->use_short_slot
) {
1655 bss_conf
->use_short_slot
= use_short_slot
;
1656 changed
|= BSS_CHANGED_ERP_SLOT
;
1662 static void ieee80211_set_associated(struct ieee80211_sub_if_data
*sdata
,
1663 struct cfg80211_bss
*cbss
,
1664 u32 bss_info_changed
)
1666 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
1667 struct ieee80211_local
*local
= sdata
->local
;
1668 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1670 bss_info_changed
|= BSS_CHANGED_ASSOC
;
1671 bss_info_changed
|= ieee80211_handle_bss_capability(sdata
,
1672 bss_conf
->assoc_capability
, bss
->has_erp_value
, bss
->erp_value
);
1674 sdata
->u
.mgd
.beacon_timeout
= usecs_to_jiffies(ieee80211_tu_to_usec(
1675 beacon_loss_count
* bss_conf
->beacon_int
));
1677 sdata
->u
.mgd
.associated
= cbss
;
1678 memcpy(sdata
->u
.mgd
.bssid
, cbss
->bssid
, ETH_ALEN
);
1680 sdata
->u
.mgd
.flags
|= IEEE80211_STA_RESET_SIGNAL_AVE
;
1682 if (sdata
->vif
.p2p
) {
1683 const struct cfg80211_bss_ies
*ies
;
1686 ies
= rcu_dereference(cbss
->ies
);
1690 ret
= cfg80211_get_p2p_attr(
1691 ies
->data
, ies
->len
,
1692 IEEE80211_P2P_ATTR_ABSENCE_NOTICE
,
1693 (u8
*) &bss_conf
->p2p_noa_attr
,
1694 sizeof(bss_conf
->p2p_noa_attr
));
1696 sdata
->u
.mgd
.p2p_noa_index
=
1697 bss_conf
->p2p_noa_attr
.index
;
1698 bss_info_changed
|= BSS_CHANGED_P2P_PS
;
1704 /* just to be sure */
1705 ieee80211_stop_poll(sdata
);
1707 ieee80211_led_assoc(local
, 1);
1709 if (sdata
->u
.mgd
.have_beacon
) {
1711 * If the AP is buggy we may get here with no DTIM period
1712 * known, so assume it's 1 which is the only safe assumption
1713 * in that case, although if the TIM IE is broken powersave
1714 * probably just won't work at all.
1716 bss_conf
->dtim_period
= sdata
->u
.mgd
.dtim_period
?: 1;
1717 bss_conf
->beacon_rate
= bss
->beacon_rate
;
1718 bss_info_changed
|= BSS_CHANGED_BEACON_INFO
;
1720 bss_conf
->beacon_rate
= NULL
;
1721 bss_conf
->dtim_period
= 0;
1724 bss_conf
->assoc
= 1;
1726 /* Tell the driver to monitor connection quality (if supported) */
1727 if (sdata
->vif
.driver_flags
& IEEE80211_VIF_SUPPORTS_CQM_RSSI
&&
1728 bss_conf
->cqm_rssi_thold
)
1729 bss_info_changed
|= BSS_CHANGED_CQM
;
1731 /* Enable ARP filtering */
1732 if (bss_conf
->arp_addr_cnt
)
1733 bss_info_changed
|= BSS_CHANGED_ARP_FILTER
;
1735 ieee80211_bss_info_change_notify(sdata
, bss_info_changed
);
1737 mutex_lock(&local
->iflist_mtx
);
1738 ieee80211_recalc_ps(local
, -1);
1739 mutex_unlock(&local
->iflist_mtx
);
1741 ieee80211_recalc_smps(sdata
);
1742 ieee80211_recalc_ps_vif(sdata
);
1744 netif_carrier_on(sdata
->dev
);
1747 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data
*sdata
,
1748 u16 stype
, u16 reason
, bool tx
,
1751 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1752 struct ieee80211_local
*local
= sdata
->local
;
1755 sdata_assert_lock(sdata
);
1757 if (WARN_ON_ONCE(tx
&& !frame_buf
))
1760 if (WARN_ON(!ifmgd
->associated
))
1763 ieee80211_stop_poll(sdata
);
1765 ifmgd
->associated
= NULL
;
1766 netif_carrier_off(sdata
->dev
);
1769 * if we want to get out of ps before disassoc (why?) we have
1770 * to do it before sending disassoc, as otherwise the null-packet
1773 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
1774 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1775 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1777 local
->ps_sdata
= NULL
;
1779 /* disable per-vif ps */
1780 ieee80211_recalc_ps_vif(sdata
);
1782 /* flush out any pending frame (e.g. DELBA) before deauth/disassoc */
1784 ieee80211_flush_queues(local
, sdata
);
1786 /* deauthenticate/disassociate now */
1787 if (tx
|| frame_buf
)
1788 ieee80211_send_deauth_disassoc(sdata
, ifmgd
->bssid
, stype
,
1789 reason
, tx
, frame_buf
);
1791 /* flush out frame */
1793 ieee80211_flush_queues(local
, sdata
);
1795 /* clear bssid only after building the needed mgmt frames */
1796 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
1798 /* remove AP and TDLS peers */
1799 sta_info_flush(sdata
);
1801 /* finally reset all BSS / config parameters */
1802 changed
|= ieee80211_reset_erp_info(sdata
);
1804 ieee80211_led_assoc(local
, 0);
1805 changed
|= BSS_CHANGED_ASSOC
;
1806 sdata
->vif
.bss_conf
.assoc
= false;
1808 ifmgd
->p2p_noa_index
= -1;
1809 memset(&sdata
->vif
.bss_conf
.p2p_noa_attr
, 0,
1810 sizeof(sdata
->vif
.bss_conf
.p2p_noa_attr
));
1812 /* on the next assoc, re-program HT/VHT parameters */
1813 memset(&ifmgd
->ht_capa
, 0, sizeof(ifmgd
->ht_capa
));
1814 memset(&ifmgd
->ht_capa_mask
, 0, sizeof(ifmgd
->ht_capa_mask
));
1815 memset(&ifmgd
->vht_capa
, 0, sizeof(ifmgd
->vht_capa
));
1816 memset(&ifmgd
->vht_capa_mask
, 0, sizeof(ifmgd
->vht_capa_mask
));
1818 sdata
->ap_power_level
= IEEE80211_UNSET_POWER_LEVEL
;
1820 del_timer_sync(&local
->dynamic_ps_timer
);
1821 cancel_work_sync(&local
->dynamic_ps_enable_work
);
1823 /* Disable ARP filtering */
1824 if (sdata
->vif
.bss_conf
.arp_addr_cnt
)
1825 changed
|= BSS_CHANGED_ARP_FILTER
;
1827 sdata
->vif
.bss_conf
.qos
= false;
1828 changed
|= BSS_CHANGED_QOS
;
1830 /* The BSSID (not really interesting) and HT changed */
1831 changed
|= BSS_CHANGED_BSSID
| BSS_CHANGED_HT
;
1832 ieee80211_bss_info_change_notify(sdata
, changed
);
1834 /* disassociated - set to defaults now */
1835 ieee80211_set_wmm_default(sdata
, false);
1837 del_timer_sync(&sdata
->u
.mgd
.conn_mon_timer
);
1838 del_timer_sync(&sdata
->u
.mgd
.bcn_mon_timer
);
1839 del_timer_sync(&sdata
->u
.mgd
.timer
);
1840 del_timer_sync(&sdata
->u
.mgd
.chswitch_timer
);
1842 sdata
->vif
.bss_conf
.dtim_period
= 0;
1843 sdata
->vif
.bss_conf
.beacon_rate
= NULL
;
1845 ifmgd
->have_beacon
= false;
1848 mutex_lock(&local
->mtx
);
1849 ieee80211_vif_release_channel(sdata
);
1851 sdata
->vif
.csa_active
= false;
1852 if (sdata
->csa_block_tx
) {
1853 ieee80211_wake_vif_queues(local
, sdata
,
1854 IEEE80211_QUEUE_STOP_REASON_CSA
);
1855 sdata
->csa_block_tx
= false;
1857 mutex_unlock(&local
->mtx
);
1859 sdata
->encrypt_headroom
= IEEE80211_ENCRYPT_HEADROOM
;
1862 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data
*sdata
,
1863 struct ieee80211_hdr
*hdr
)
1866 * We can postpone the mgd.timer whenever receiving unicast frames
1867 * from AP because we know that the connection is working both ways
1868 * at that time. But multicast frames (and hence also beacons) must
1869 * be ignored here, because we need to trigger the timer during
1870 * data idle periods for sending the periodic probe request to the
1871 * AP we're connected to.
1873 if (is_multicast_ether_addr(hdr
->addr1
))
1876 ieee80211_sta_reset_conn_monitor(sdata
);
1879 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data
*sdata
)
1881 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1882 struct ieee80211_local
*local
= sdata
->local
;
1884 mutex_lock(&local
->mtx
);
1885 if (!(ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
))
1888 __ieee80211_stop_poll(sdata
);
1890 mutex_lock(&local
->iflist_mtx
);
1891 ieee80211_recalc_ps(local
, -1);
1892 mutex_unlock(&local
->iflist_mtx
);
1894 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
1898 * We've received a probe response, but are not sure whether
1899 * we have or will be receiving any beacons or data, so let's
1900 * schedule the timers again, just in case.
1902 ieee80211_sta_reset_beacon_monitor(sdata
);
1904 mod_timer(&ifmgd
->conn_mon_timer
,
1905 round_jiffies_up(jiffies
+
1906 IEEE80211_CONNECTION_IDLE_TIME
));
1908 mutex_unlock(&local
->mtx
);
1911 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data
*sdata
,
1912 struct ieee80211_hdr
*hdr
, bool ack
)
1914 if (!ieee80211_is_data(hdr
->frame_control
))
1917 if (ieee80211_is_nullfunc(hdr
->frame_control
) &&
1918 sdata
->u
.mgd
.probe_send_count
> 0) {
1920 ieee80211_sta_reset_conn_monitor(sdata
);
1922 sdata
->u
.mgd
.nullfunc_failed
= true;
1923 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
1928 ieee80211_sta_reset_conn_monitor(sdata
);
1931 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data
*sdata
)
1933 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1935 u8
*dst
= ifmgd
->associated
->bssid
;
1936 u8 unicast_limit
= max(1, max_probe_tries
- 3);
1939 * Try sending broadcast probe requests for the last three
1940 * probe requests after the first ones failed since some
1941 * buggy APs only support broadcast probe requests.
1943 if (ifmgd
->probe_send_count
>= unicast_limit
)
1947 * When the hardware reports an accurate Tx ACK status, it's
1948 * better to send a nullfunc frame instead of a probe request,
1949 * as it will kick us off the AP quickly if we aren't associated
1950 * anymore. The timeout will be reset if the frame is ACKed by
1953 ifmgd
->probe_send_count
++;
1955 if (sdata
->local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) {
1956 ifmgd
->nullfunc_failed
= false;
1957 ieee80211_send_nullfunc(sdata
->local
, sdata
, 0);
1962 ssid
= ieee80211_bss_get_ie(ifmgd
->associated
, WLAN_EID_SSID
);
1963 if (WARN_ON_ONCE(ssid
== NULL
))
1968 ieee80211_send_probe_req(sdata
, dst
, ssid
+ 2, ssid_len
, NULL
,
1969 0, (u32
) -1, true, 0,
1970 ifmgd
->associated
->channel
, false);
1974 ifmgd
->probe_timeout
= jiffies
+ msecs_to_jiffies(probe_wait_ms
);
1975 run_again(sdata
, ifmgd
->probe_timeout
);
1976 if (sdata
->local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
1977 ieee80211_flush_queues(sdata
->local
, sdata
);
1980 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data
*sdata
,
1983 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1984 bool already
= false;
1986 if (!ieee80211_sdata_running(sdata
))
1991 if (!ifmgd
->associated
)
1994 mutex_lock(&sdata
->local
->mtx
);
1996 if (sdata
->local
->tmp_channel
|| sdata
->local
->scanning
) {
1997 mutex_unlock(&sdata
->local
->mtx
);
2002 mlme_dbg_ratelimited(sdata
,
2003 "detected beacon loss from AP (missed %d beacons) - probing\n",
2006 ieee80211_cqm_rssi_notify(&sdata
->vif
,
2007 NL80211_CQM_RSSI_BEACON_LOSS_EVENT
,
2012 * The driver/our work has already reported this event or the
2013 * connection monitoring has kicked in and we have already sent
2014 * a probe request. Or maybe the AP died and the driver keeps
2015 * reporting until we disassociate...
2017 * In either case we have to ignore the current call to this
2018 * function (except for setting the correct probe reason bit)
2019 * because otherwise we would reset the timer every time and
2020 * never check whether we received a probe response!
2022 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
2025 ifmgd
->flags
|= IEEE80211_STA_CONNECTION_POLL
;
2027 mutex_unlock(&sdata
->local
->mtx
);
2032 mutex_lock(&sdata
->local
->iflist_mtx
);
2033 ieee80211_recalc_ps(sdata
->local
, -1);
2034 mutex_unlock(&sdata
->local
->iflist_mtx
);
2036 ifmgd
->probe_send_count
= 0;
2037 ieee80211_mgd_probe_ap_send(sdata
);
2039 sdata_unlock(sdata
);
2042 struct sk_buff
*ieee80211_ap_probereq_get(struct ieee80211_hw
*hw
,
2043 struct ieee80211_vif
*vif
)
2045 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2046 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2047 struct cfg80211_bss
*cbss
;
2048 struct sk_buff
*skb
;
2052 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
2055 sdata_assert_lock(sdata
);
2057 if (ifmgd
->associated
)
2058 cbss
= ifmgd
->associated
;
2059 else if (ifmgd
->auth_data
)
2060 cbss
= ifmgd
->auth_data
->bss
;
2061 else if (ifmgd
->assoc_data
)
2062 cbss
= ifmgd
->assoc_data
->bss
;
2067 ssid
= ieee80211_bss_get_ie(cbss
, WLAN_EID_SSID
);
2068 if (WARN_ON_ONCE(ssid
== NULL
))
2073 skb
= ieee80211_build_probe_req(sdata
, cbss
->bssid
,
2074 (u32
) -1, cbss
->channel
,
2081 EXPORT_SYMBOL(ieee80211_ap_probereq_get
);
2083 static void __ieee80211_disconnect(struct ieee80211_sub_if_data
*sdata
)
2085 struct ieee80211_local
*local
= sdata
->local
;
2086 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2087 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
2090 if (!ifmgd
->associated
) {
2091 sdata_unlock(sdata
);
2095 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
2096 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
2098 mutex_lock(&local
->mtx
);
2099 sdata
->vif
.csa_active
= false;
2100 if (sdata
->csa_block_tx
) {
2101 ieee80211_wake_vif_queues(local
, sdata
,
2102 IEEE80211_QUEUE_STOP_REASON_CSA
);
2103 sdata
->csa_block_tx
= false;
2105 mutex_unlock(&local
->mtx
);
2107 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
2108 IEEE80211_DEAUTH_FRAME_LEN
);
2109 sdata_unlock(sdata
);
2112 static void ieee80211_beacon_connection_loss_work(struct work_struct
*work
)
2114 struct ieee80211_sub_if_data
*sdata
=
2115 container_of(work
, struct ieee80211_sub_if_data
,
2116 u
.mgd
.beacon_connection_loss_work
);
2117 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2118 struct sta_info
*sta
;
2120 if (ifmgd
->associated
) {
2122 sta
= sta_info_get(sdata
, ifmgd
->bssid
);
2124 sta
->beacon_loss_count
++;
2128 if (ifmgd
->connection_loss
) {
2129 sdata_info(sdata
, "Connection to AP %pM lost\n",
2131 __ieee80211_disconnect(sdata
);
2133 ieee80211_mgd_probe_ap(sdata
, true);
2137 static void ieee80211_csa_connection_drop_work(struct work_struct
*work
)
2139 struct ieee80211_sub_if_data
*sdata
=
2140 container_of(work
, struct ieee80211_sub_if_data
,
2141 u
.mgd
.csa_connection_drop_work
);
2143 __ieee80211_disconnect(sdata
);
2146 void ieee80211_beacon_loss(struct ieee80211_vif
*vif
)
2148 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2149 struct ieee80211_hw
*hw
= &sdata
->local
->hw
;
2151 trace_api_beacon_loss(sdata
);
2153 sdata
->u
.mgd
.connection_loss
= false;
2154 ieee80211_queue_work(hw
, &sdata
->u
.mgd
.beacon_connection_loss_work
);
2156 EXPORT_SYMBOL(ieee80211_beacon_loss
);
2158 void ieee80211_connection_loss(struct ieee80211_vif
*vif
)
2160 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2161 struct ieee80211_hw
*hw
= &sdata
->local
->hw
;
2163 trace_api_connection_loss(sdata
);
2165 sdata
->u
.mgd
.connection_loss
= true;
2166 ieee80211_queue_work(hw
, &sdata
->u
.mgd
.beacon_connection_loss_work
);
2168 EXPORT_SYMBOL(ieee80211_connection_loss
);
2171 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data
*sdata
,
2174 struct ieee80211_mgd_auth_data
*auth_data
= sdata
->u
.mgd
.auth_data
;
2176 sdata_assert_lock(sdata
);
2179 sta_info_destroy_addr(sdata
, auth_data
->bss
->bssid
);
2181 memset(sdata
->u
.mgd
.bssid
, 0, ETH_ALEN
);
2182 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
2183 sdata
->u
.mgd
.flags
= 0;
2184 mutex_lock(&sdata
->local
->mtx
);
2185 ieee80211_vif_release_channel(sdata
);
2186 mutex_unlock(&sdata
->local
->mtx
);
2189 cfg80211_put_bss(sdata
->local
->hw
.wiphy
, auth_data
->bss
);
2191 sdata
->u
.mgd
.auth_data
= NULL
;
2194 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data
*sdata
,
2195 struct ieee80211_mgmt
*mgmt
, size_t len
)
2197 struct ieee80211_local
*local
= sdata
->local
;
2198 struct ieee80211_mgd_auth_data
*auth_data
= sdata
->u
.mgd
.auth_data
;
2200 struct ieee802_11_elems elems
;
2203 pos
= mgmt
->u
.auth
.variable
;
2204 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
2205 if (!elems
.challenge
)
2207 auth_data
->expected_transaction
= 4;
2208 drv_mgd_prepare_tx(sdata
->local
, sdata
);
2209 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
2210 tx_flags
= IEEE80211_TX_CTL_REQ_TX_STATUS
|
2211 IEEE80211_TX_INTFL_MLME_CONN_TX
;
2212 ieee80211_send_auth(sdata
, 3, auth_data
->algorithm
, 0,
2213 elems
.challenge
- 2, elems
.challenge_len
+ 2,
2214 auth_data
->bss
->bssid
, auth_data
->bss
->bssid
,
2215 auth_data
->key
, auth_data
->key_len
,
2216 auth_data
->key_idx
, tx_flags
);
2219 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data
*sdata
,
2220 struct ieee80211_mgmt
*mgmt
, size_t len
)
2222 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2224 u16 auth_alg
, auth_transaction
, status_code
;
2225 struct sta_info
*sta
;
2227 sdata_assert_lock(sdata
);
2232 if (!ifmgd
->auth_data
|| ifmgd
->auth_data
->done
)
2235 memcpy(bssid
, ifmgd
->auth_data
->bss
->bssid
, ETH_ALEN
);
2237 if (!ether_addr_equal(bssid
, mgmt
->bssid
))
2240 auth_alg
= le16_to_cpu(mgmt
->u
.auth
.auth_alg
);
2241 auth_transaction
= le16_to_cpu(mgmt
->u
.auth
.auth_transaction
);
2242 status_code
= le16_to_cpu(mgmt
->u
.auth
.status_code
);
2244 if (auth_alg
!= ifmgd
->auth_data
->algorithm
||
2245 auth_transaction
!= ifmgd
->auth_data
->expected_transaction
) {
2246 sdata_info(sdata
, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2247 mgmt
->sa
, auth_alg
, ifmgd
->auth_data
->algorithm
,
2249 ifmgd
->auth_data
->expected_transaction
);
2253 if (status_code
!= WLAN_STATUS_SUCCESS
) {
2254 sdata_info(sdata
, "%pM denied authentication (status %d)\n",
2255 mgmt
->sa
, status_code
);
2256 ieee80211_destroy_auth_data(sdata
, false);
2257 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2261 switch (ifmgd
->auth_data
->algorithm
) {
2262 case WLAN_AUTH_OPEN
:
2263 case WLAN_AUTH_LEAP
:
2267 case WLAN_AUTH_SHARED_KEY
:
2268 if (ifmgd
->auth_data
->expected_transaction
!= 4) {
2269 ieee80211_auth_challenge(sdata
, mgmt
, len
);
2270 /* need another frame */
2275 WARN_ONCE(1, "invalid auth alg %d",
2276 ifmgd
->auth_data
->algorithm
);
2280 sdata_info(sdata
, "authenticated\n");
2281 ifmgd
->auth_data
->done
= true;
2282 ifmgd
->auth_data
->timeout
= jiffies
+ IEEE80211_AUTH_WAIT_ASSOC
;
2283 ifmgd
->auth_data
->timeout_started
= true;
2284 run_again(sdata
, ifmgd
->auth_data
->timeout
);
2286 if (ifmgd
->auth_data
->algorithm
== WLAN_AUTH_SAE
&&
2287 ifmgd
->auth_data
->expected_transaction
!= 2) {
2289 * Report auth frame to user space for processing since another
2290 * round of Authentication frames is still needed.
2292 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2296 /* move station state to auth */
2297 mutex_lock(&sdata
->local
->sta_mtx
);
2298 sta
= sta_info_get(sdata
, bssid
);
2300 WARN_ONCE(1, "%s: STA %pM not found", sdata
->name
, bssid
);
2303 if (sta_info_move_state(sta
, IEEE80211_STA_AUTH
)) {
2304 sdata_info(sdata
, "failed moving %pM to auth\n", bssid
);
2307 mutex_unlock(&sdata
->local
->sta_mtx
);
2309 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2312 mutex_unlock(&sdata
->local
->sta_mtx
);
2313 /* ignore frame -- wait for timeout */
2316 #define case_WLAN(type) \
2317 case WLAN_REASON_##type: return #type
2319 static const char *ieee80211_get_reason_code_string(u16 reason_code
)
2321 switch (reason_code
) {
2322 case_WLAN(UNSPECIFIED
);
2323 case_WLAN(PREV_AUTH_NOT_VALID
);
2324 case_WLAN(DEAUTH_LEAVING
);
2325 case_WLAN(DISASSOC_DUE_TO_INACTIVITY
);
2326 case_WLAN(DISASSOC_AP_BUSY
);
2327 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA
);
2328 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA
);
2329 case_WLAN(DISASSOC_STA_HAS_LEFT
);
2330 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH
);
2331 case_WLAN(DISASSOC_BAD_POWER
);
2332 case_WLAN(DISASSOC_BAD_SUPP_CHAN
);
2333 case_WLAN(INVALID_IE
);
2334 case_WLAN(MIC_FAILURE
);
2335 case_WLAN(4WAY_HANDSHAKE_TIMEOUT
);
2336 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT
);
2337 case_WLAN(IE_DIFFERENT
);
2338 case_WLAN(INVALID_GROUP_CIPHER
);
2339 case_WLAN(INVALID_PAIRWISE_CIPHER
);
2340 case_WLAN(INVALID_AKMP
);
2341 case_WLAN(UNSUPP_RSN_VERSION
);
2342 case_WLAN(INVALID_RSN_IE_CAP
);
2343 case_WLAN(IEEE8021X_FAILED
);
2344 case_WLAN(CIPHER_SUITE_REJECTED
);
2345 case_WLAN(DISASSOC_UNSPECIFIED_QOS
);
2346 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH
);
2347 case_WLAN(DISASSOC_LOW_ACK
);
2348 case_WLAN(DISASSOC_QAP_EXCEED_TXOP
);
2349 case_WLAN(QSTA_LEAVE_QBSS
);
2350 case_WLAN(QSTA_NOT_USE
);
2351 case_WLAN(QSTA_REQUIRE_SETUP
);
2352 case_WLAN(QSTA_TIMEOUT
);
2353 case_WLAN(QSTA_CIPHER_NOT_SUPP
);
2354 case_WLAN(MESH_PEER_CANCELED
);
2355 case_WLAN(MESH_MAX_PEERS
);
2356 case_WLAN(MESH_CONFIG
);
2357 case_WLAN(MESH_CLOSE
);
2358 case_WLAN(MESH_MAX_RETRIES
);
2359 case_WLAN(MESH_CONFIRM_TIMEOUT
);
2360 case_WLAN(MESH_INVALID_GTK
);
2361 case_WLAN(MESH_INCONSISTENT_PARAM
);
2362 case_WLAN(MESH_INVALID_SECURITY
);
2363 case_WLAN(MESH_PATH_ERROR
);
2364 case_WLAN(MESH_PATH_NOFORWARD
);
2365 case_WLAN(MESH_PATH_DEST_UNREACHABLE
);
2366 case_WLAN(MAC_EXISTS_IN_MBSS
);
2367 case_WLAN(MESH_CHAN_REGULATORY
);
2368 case_WLAN(MESH_CHAN
);
2369 default: return "<unknown>";
2373 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data
*sdata
,
2374 struct ieee80211_mgmt
*mgmt
, size_t len
)
2376 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2377 const u8
*bssid
= NULL
;
2380 sdata_assert_lock(sdata
);
2385 if (!ifmgd
->associated
||
2386 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2389 bssid
= ifmgd
->associated
->bssid
;
2391 reason_code
= le16_to_cpu(mgmt
->u
.deauth
.reason_code
);
2393 sdata_info(sdata
, "deauthenticated from %pM (Reason: %u=%s)\n",
2394 bssid
, reason_code
, ieee80211_get_reason_code_string(reason_code
));
2396 ieee80211_set_disassoc(sdata
, 0, 0, false, NULL
);
2398 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2402 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data
*sdata
,
2403 struct ieee80211_mgmt
*mgmt
, size_t len
)
2405 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2408 sdata_assert_lock(sdata
);
2413 if (!ifmgd
->associated
||
2414 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2417 reason_code
= le16_to_cpu(mgmt
->u
.disassoc
.reason_code
);
2419 sdata_info(sdata
, "disassociated from %pM (Reason: %u)\n",
2420 mgmt
->sa
, reason_code
);
2422 ieee80211_set_disassoc(sdata
, 0, 0, false, NULL
);
2424 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2427 static void ieee80211_get_rates(struct ieee80211_supported_band
*sband
,
2428 u8
*supp_rates
, unsigned int supp_rates_len
,
2429 u32
*rates
, u32
*basic_rates
,
2430 bool *have_higher_than_11mbit
,
2431 int *min_rate
, int *min_rate_index
,
2432 int shift
, u32 rate_flags
)
2436 for (i
= 0; i
< supp_rates_len
; i
++) {
2437 int rate
= supp_rates
[i
] & 0x7f;
2438 bool is_basic
= !!(supp_rates
[i
] & 0x80);
2440 if ((rate
* 5 * (1 << shift
)) > 110)
2441 *have_higher_than_11mbit
= true;
2444 * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
2445 * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
2447 * Note: Even through the membership selector and the basic
2448 * rate flag share the same bit, they are not exactly
2451 if (!!(supp_rates
[i
] & 0x80) &&
2452 (supp_rates
[i
] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY
)
2455 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
2456 struct ieee80211_rate
*br
;
2459 br
= &sband
->bitrates
[j
];
2460 if ((rate_flags
& br
->flags
) != rate_flags
)
2463 brate
= DIV_ROUND_UP(br
->bitrate
, (1 << shift
) * 5);
2464 if (brate
== rate
) {
2467 *basic_rates
|= BIT(j
);
2468 if ((rate
* 5) < *min_rate
) {
2469 *min_rate
= rate
* 5;
2470 *min_rate_index
= j
;
2478 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data
*sdata
,
2481 struct ieee80211_mgd_assoc_data
*assoc_data
= sdata
->u
.mgd
.assoc_data
;
2483 sdata_assert_lock(sdata
);
2486 sta_info_destroy_addr(sdata
, assoc_data
->bss
->bssid
);
2488 memset(sdata
->u
.mgd
.bssid
, 0, ETH_ALEN
);
2489 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
2490 sdata
->u
.mgd
.flags
= 0;
2491 mutex_lock(&sdata
->local
->mtx
);
2492 ieee80211_vif_release_channel(sdata
);
2493 mutex_unlock(&sdata
->local
->mtx
);
2497 sdata
->u
.mgd
.assoc_data
= NULL
;
2500 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data
*sdata
,
2501 struct cfg80211_bss
*cbss
,
2502 struct ieee80211_mgmt
*mgmt
, size_t len
)
2504 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2505 struct ieee80211_local
*local
= sdata
->local
;
2506 struct ieee80211_supported_band
*sband
;
2507 struct sta_info
*sta
;
2509 u16 capab_info
, aid
;
2510 struct ieee802_11_elems elems
;
2511 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
2512 const struct cfg80211_bss_ies
*bss_ies
= NULL
;
2513 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
2518 /* AssocResp and ReassocResp have identical structure */
2520 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
2521 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
2523 if ((aid
& (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2524 sdata_info(sdata
, "invalid AID value 0x%x; bits 15:14 not set\n",
2526 aid
&= ~(BIT(15) | BIT(14));
2528 ifmgd
->broken_ap
= false;
2530 if (aid
== 0 || aid
> IEEE80211_MAX_AID
) {
2531 sdata_info(sdata
, "invalid AID value %d (out of range), turn off PS\n",
2534 ifmgd
->broken_ap
= true;
2537 pos
= mgmt
->u
.assoc_resp
.variable
;
2538 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
2540 if (!elems
.supp_rates
) {
2541 sdata_info(sdata
, "no SuppRates element in AssocResp\n");
2548 * Some APs are erroneously not including some information in their
2549 * (re)association response frames. Try to recover by using the data
2550 * from the beacon or probe response. This seems to afflict mobile
2551 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2552 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2554 if ((assoc_data
->wmm
&& !elems
.wmm_param
) ||
2555 (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
2556 (!elems
.ht_cap_elem
|| !elems
.ht_operation
)) ||
2557 (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
2558 (!elems
.vht_cap_elem
|| !elems
.vht_operation
))) {
2559 const struct cfg80211_bss_ies
*ies
;
2560 struct ieee802_11_elems bss_elems
;
2563 ies
= rcu_dereference(cbss
->ies
);
2565 bss_ies
= kmemdup(ies
, sizeof(*ies
) + ies
->len
,
2571 ieee802_11_parse_elems(bss_ies
->data
, bss_ies
->len
,
2573 if (assoc_data
->wmm
&&
2574 !elems
.wmm_param
&& bss_elems
.wmm_param
) {
2575 elems
.wmm_param
= bss_elems
.wmm_param
;
2577 "AP bug: WMM param missing from AssocResp\n");
2581 * Also check if we requested HT/VHT, otherwise the AP doesn't
2582 * have to include the IEs in the (re)association response.
2584 if (!elems
.ht_cap_elem
&& bss_elems
.ht_cap_elem
&&
2585 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)) {
2586 elems
.ht_cap_elem
= bss_elems
.ht_cap_elem
;
2588 "AP bug: HT capability missing from AssocResp\n");
2590 if (!elems
.ht_operation
&& bss_elems
.ht_operation
&&
2591 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)) {
2592 elems
.ht_operation
= bss_elems
.ht_operation
;
2594 "AP bug: HT operation missing from AssocResp\n");
2596 if (!elems
.vht_cap_elem
&& bss_elems
.vht_cap_elem
&&
2597 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)) {
2598 elems
.vht_cap_elem
= bss_elems
.vht_cap_elem
;
2600 "AP bug: VHT capa missing from AssocResp\n");
2602 if (!elems
.vht_operation
&& bss_elems
.vht_operation
&&
2603 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)) {
2604 elems
.vht_operation
= bss_elems
.vht_operation
;
2606 "AP bug: VHT operation missing from AssocResp\n");
2611 * We previously checked these in the beacon/probe response, so
2612 * they should be present here. This is just a safety net.
2614 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
2615 (!elems
.wmm_param
|| !elems
.ht_cap_elem
|| !elems
.ht_operation
)) {
2617 "HT AP is missing WMM params or HT capability/operation\n");
2622 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
2623 (!elems
.vht_cap_elem
|| !elems
.vht_operation
)) {
2625 "VHT AP is missing VHT capability/operation\n");
2630 mutex_lock(&sdata
->local
->sta_mtx
);
2632 * station info was already allocated and inserted before
2633 * the association and should be available to us
2635 sta
= sta_info_get(sdata
, cbss
->bssid
);
2636 if (WARN_ON(!sta
)) {
2637 mutex_unlock(&sdata
->local
->sta_mtx
);
2642 sband
= local
->hw
.wiphy
->bands
[ieee80211_get_sdata_band(sdata
)];
2644 /* Set up internal HT/VHT capabilities */
2645 if (elems
.ht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
))
2646 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata
, sband
,
2647 elems
.ht_cap_elem
, sta
);
2649 if (elems
.vht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
2650 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata
, sband
,
2651 elems
.vht_cap_elem
, sta
);
2654 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
2655 * in their association response, so ignore that data for our own
2656 * configuration. If it changed since the last beacon, we'll get the
2657 * next beacon and update then.
2661 * If an operating mode notification IE is present, override the
2662 * NSS calculation (that would be done in rate_control_rate_init())
2663 * and use the # of streams from that element.
2665 if (elems
.opmode_notif
&&
2666 !(*elems
.opmode_notif
& IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF
)) {
2669 nss
= *elems
.opmode_notif
& IEEE80211_OPMODE_NOTIF_RX_NSS_MASK
;
2670 nss
>>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT
;
2672 sta
->sta
.rx_nss
= nss
;
2675 rate_control_rate_init(sta
);
2677 if (ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
)
2678 set_sta_flag(sta
, WLAN_STA_MFP
);
2680 if (elems
.wmm_param
)
2681 set_sta_flag(sta
, WLAN_STA_WME
);
2683 err
= sta_info_move_state(sta
, IEEE80211_STA_ASSOC
);
2684 if (!err
&& !(ifmgd
->flags
& IEEE80211_STA_CONTROL_PORT
))
2685 err
= sta_info_move_state(sta
, IEEE80211_STA_AUTHORIZED
);
2688 "failed to move station %pM to desired state\n",
2690 WARN_ON(__sta_info_destroy(sta
));
2691 mutex_unlock(&sdata
->local
->sta_mtx
);
2696 mutex_unlock(&sdata
->local
->sta_mtx
);
2699 * Always handle WMM once after association regardless
2700 * of the first value the AP uses. Setting -1 here has
2701 * that effect because the AP values is an unsigned
2704 ifmgd
->wmm_last_param_set
= -1;
2706 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) && elems
.wmm_param
)
2707 ieee80211_sta_wmm_params(local
, sdata
, elems
.wmm_param
,
2708 elems
.wmm_param_len
);
2710 ieee80211_set_wmm_default(sdata
, false);
2711 changed
|= BSS_CHANGED_QOS
;
2713 /* set AID and assoc capability,
2714 * ieee80211_set_associated() will tell the driver */
2715 bss_conf
->aid
= aid
;
2716 bss_conf
->assoc_capability
= capab_info
;
2717 ieee80211_set_associated(sdata
, cbss
, changed
);
2720 * If we're using 4-addr mode, let the AP know that we're
2721 * doing so, so that it can create the STA VLAN on its side
2723 if (ifmgd
->use_4addr
)
2724 ieee80211_send_4addr_nullfunc(local
, sdata
);
2727 * Start timer to probe the connection to the AP now.
2728 * Also start the timer that will detect beacon loss.
2730 ieee80211_sta_rx_notify(sdata
, (struct ieee80211_hdr
*)mgmt
);
2731 ieee80211_sta_reset_beacon_monitor(sdata
);
2739 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data
*sdata
,
2740 struct ieee80211_mgmt
*mgmt
,
2743 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2744 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
2745 u16 capab_info
, status_code
, aid
;
2746 struct ieee802_11_elems elems
;
2749 struct cfg80211_bss
*bss
;
2751 sdata_assert_lock(sdata
);
2755 if (!ether_addr_equal(assoc_data
->bss
->bssid
, mgmt
->bssid
))
2759 * AssocResp and ReassocResp have identical structure, so process both
2760 * of them in this function.
2766 reassoc
= ieee80211_is_reassoc_req(mgmt
->frame_control
);
2767 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
2768 status_code
= le16_to_cpu(mgmt
->u
.assoc_resp
.status_code
);
2769 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
2772 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
2773 reassoc
? "Rea" : "A", mgmt
->sa
,
2774 capab_info
, status_code
, (u16
)(aid
& ~(BIT(15) | BIT(14))));
2776 pos
= mgmt
->u
.assoc_resp
.variable
;
2777 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
2779 if (status_code
== WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY
&&
2780 elems
.timeout_int
&&
2781 elems
.timeout_int
->type
== WLAN_TIMEOUT_ASSOC_COMEBACK
) {
2783 tu
= le32_to_cpu(elems
.timeout_int
->value
);
2784 ms
= tu
* 1024 / 1000;
2786 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
2788 assoc_data
->timeout
= jiffies
+ msecs_to_jiffies(ms
);
2789 assoc_data
->timeout_started
= true;
2790 if (ms
> IEEE80211_ASSOC_TIMEOUT
)
2791 run_again(sdata
, assoc_data
->timeout
);
2795 bss
= assoc_data
->bss
;
2797 if (status_code
!= WLAN_STATUS_SUCCESS
) {
2798 sdata_info(sdata
, "%pM denied association (code=%d)\n",
2799 mgmt
->sa
, status_code
);
2800 ieee80211_destroy_assoc_data(sdata
, false);
2802 if (!ieee80211_assoc_success(sdata
, bss
, mgmt
, len
)) {
2803 /* oops -- internal error -- send timeout for now */
2804 ieee80211_destroy_assoc_data(sdata
, false);
2805 cfg80211_assoc_timeout(sdata
->dev
, bss
);
2808 sdata_info(sdata
, "associated\n");
2811 * destroy assoc_data afterwards, as otherwise an idle
2812 * recalc after assoc_data is NULL but before associated
2813 * is set can cause the interface to go idle
2815 ieee80211_destroy_assoc_data(sdata
, true);
2818 cfg80211_rx_assoc_resp(sdata
->dev
, bss
, (u8
*)mgmt
, len
);
2821 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data
*sdata
,
2822 struct ieee80211_mgmt
*mgmt
, size_t len
,
2823 struct ieee80211_rx_status
*rx_status
,
2824 struct ieee802_11_elems
*elems
)
2826 struct ieee80211_local
*local
= sdata
->local
;
2827 struct ieee80211_bss
*bss
;
2828 struct ieee80211_channel
*channel
;
2830 sdata_assert_lock(sdata
);
2832 channel
= ieee80211_get_channel(local
->hw
.wiphy
, rx_status
->freq
);
2836 bss
= ieee80211_bss_info_update(local
, rx_status
, mgmt
, len
, elems
,
2839 sdata
->vif
.bss_conf
.beacon_rate
= bss
->beacon_rate
;
2840 ieee80211_rx_bss_put(local
, bss
);
2845 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data
*sdata
,
2846 struct sk_buff
*skb
)
2848 struct ieee80211_mgmt
*mgmt
= (void *)skb
->data
;
2849 struct ieee80211_if_managed
*ifmgd
;
2850 struct ieee80211_rx_status
*rx_status
= (void *) skb
->cb
;
2851 size_t baselen
, len
= skb
->len
;
2852 struct ieee802_11_elems elems
;
2854 ifmgd
= &sdata
->u
.mgd
;
2856 sdata_assert_lock(sdata
);
2858 if (!ether_addr_equal(mgmt
->da
, sdata
->vif
.addr
))
2859 return; /* ignore ProbeResp to foreign address */
2861 baselen
= (u8
*) mgmt
->u
.probe_resp
.variable
- (u8
*) mgmt
;
2865 ieee802_11_parse_elems(mgmt
->u
.probe_resp
.variable
, len
- baselen
,
2868 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
2870 if (ifmgd
->associated
&&
2871 ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2872 ieee80211_reset_ap_probe(sdata
);
2874 if (ifmgd
->auth_data
&& !ifmgd
->auth_data
->bss
->proberesp_ies
&&
2875 ether_addr_equal(mgmt
->bssid
, ifmgd
->auth_data
->bss
->bssid
)) {
2876 /* got probe response, continue with auth */
2877 sdata_info(sdata
, "direct probe responded\n");
2878 ifmgd
->auth_data
->tries
= 0;
2879 ifmgd
->auth_data
->timeout
= jiffies
;
2880 ifmgd
->auth_data
->timeout_started
= true;
2881 run_again(sdata
, ifmgd
->auth_data
->timeout
);
2886 * This is the canonical list of information elements we care about,
2887 * the filter code also gives us all changes to the Microsoft OUI
2888 * (00:50:F2) vendor IE which is used for WMM which we need to track.
2890 * We implement beacon filtering in software since that means we can
2891 * avoid processing the frame here and in cfg80211, and userspace
2892 * will not be able to tell whether the hardware supports it or not.
2894 * XXX: This list needs to be dynamic -- userspace needs to be able to
2895 * add items it requires. It also needs to be able to tell us to
2896 * look out for other vendor IEs.
2898 static const u64 care_about_ies
=
2899 (1ULL << WLAN_EID_COUNTRY
) |
2900 (1ULL << WLAN_EID_ERP_INFO
) |
2901 (1ULL << WLAN_EID_CHANNEL_SWITCH
) |
2902 (1ULL << WLAN_EID_PWR_CONSTRAINT
) |
2903 (1ULL << WLAN_EID_HT_CAPABILITY
) |
2904 (1ULL << WLAN_EID_HT_OPERATION
);
2906 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data
*sdata
,
2907 struct ieee80211_mgmt
*mgmt
, size_t len
,
2908 struct ieee80211_rx_status
*rx_status
)
2910 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2911 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
2913 struct ieee802_11_elems elems
;
2914 struct ieee80211_local
*local
= sdata
->local
;
2915 struct ieee80211_chanctx_conf
*chanctx_conf
;
2916 struct ieee80211_channel
*chan
;
2917 struct sta_info
*sta
;
2923 u8 deauth_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
2925 sdata_assert_lock(sdata
);
2927 /* Process beacon from the current BSS */
2928 baselen
= (u8
*) mgmt
->u
.beacon
.variable
- (u8
*) mgmt
;
2933 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2934 if (!chanctx_conf
) {
2939 if (rx_status
->freq
!= chanctx_conf
->def
.chan
->center_freq
) {
2943 chan
= chanctx_conf
->def
.chan
;
2946 if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->need_beacon
&&
2947 ether_addr_equal(mgmt
->bssid
, ifmgd
->assoc_data
->bss
->bssid
)) {
2948 ieee802_11_parse_elems(mgmt
->u
.beacon
.variable
,
2949 len
- baselen
, false, &elems
);
2951 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
2952 if (elems
.tim
&& !elems
.parse_error
) {
2953 const struct ieee80211_tim_ie
*tim_ie
= elems
.tim
;
2954 ifmgd
->dtim_period
= tim_ie
->dtim_period
;
2956 ifmgd
->have_beacon
= true;
2957 ifmgd
->assoc_data
->need_beacon
= false;
2958 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
2959 sdata
->vif
.bss_conf
.sync_tsf
=
2960 le64_to_cpu(mgmt
->u
.beacon
.timestamp
);
2961 sdata
->vif
.bss_conf
.sync_device_ts
=
2962 rx_status
->device_timestamp
;
2964 sdata
->vif
.bss_conf
.sync_dtim_count
=
2965 elems
.tim
->dtim_count
;
2967 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
2969 /* continue assoc process */
2970 ifmgd
->assoc_data
->timeout
= jiffies
;
2971 ifmgd
->assoc_data
->timeout_started
= true;
2972 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
2976 if (!ifmgd
->associated
||
2977 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2979 bssid
= ifmgd
->associated
->bssid
;
2981 /* Track average RSSI from the Beacon frames of the current AP */
2982 ifmgd
->last_beacon_signal
= rx_status
->signal
;
2983 if (ifmgd
->flags
& IEEE80211_STA_RESET_SIGNAL_AVE
) {
2984 ifmgd
->flags
&= ~IEEE80211_STA_RESET_SIGNAL_AVE
;
2985 ifmgd
->ave_beacon_signal
= rx_status
->signal
* 16;
2986 ifmgd
->last_cqm_event_signal
= 0;
2987 ifmgd
->count_beacon_signal
= 1;
2988 ifmgd
->last_ave_beacon_signal
= 0;
2990 ifmgd
->ave_beacon_signal
=
2991 (IEEE80211_SIGNAL_AVE_WEIGHT
* rx_status
->signal
* 16 +
2992 (16 - IEEE80211_SIGNAL_AVE_WEIGHT
) *
2993 ifmgd
->ave_beacon_signal
) / 16;
2994 ifmgd
->count_beacon_signal
++;
2997 if (ifmgd
->rssi_min_thold
!= ifmgd
->rssi_max_thold
&&
2998 ifmgd
->count_beacon_signal
>= IEEE80211_SIGNAL_AVE_MIN_COUNT
) {
2999 int sig
= ifmgd
->ave_beacon_signal
;
3000 int last_sig
= ifmgd
->last_ave_beacon_signal
;
3003 * if signal crosses either of the boundaries, invoke callback
3004 * with appropriate parameters
3006 if (sig
> ifmgd
->rssi_max_thold
&&
3007 (last_sig
<= ifmgd
->rssi_min_thold
|| last_sig
== 0)) {
3008 ifmgd
->last_ave_beacon_signal
= sig
;
3009 drv_rssi_callback(local
, sdata
, RSSI_EVENT_HIGH
);
3010 } else if (sig
< ifmgd
->rssi_min_thold
&&
3011 (last_sig
>= ifmgd
->rssi_max_thold
||
3013 ifmgd
->last_ave_beacon_signal
= sig
;
3014 drv_rssi_callback(local
, sdata
, RSSI_EVENT_LOW
);
3018 if (bss_conf
->cqm_rssi_thold
&&
3019 ifmgd
->count_beacon_signal
>= IEEE80211_SIGNAL_AVE_MIN_COUNT
&&
3020 !(sdata
->vif
.driver_flags
& IEEE80211_VIF_SUPPORTS_CQM_RSSI
)) {
3021 int sig
= ifmgd
->ave_beacon_signal
/ 16;
3022 int last_event
= ifmgd
->last_cqm_event_signal
;
3023 int thold
= bss_conf
->cqm_rssi_thold
;
3024 int hyst
= bss_conf
->cqm_rssi_hyst
;
3026 (last_event
== 0 || sig
< last_event
- hyst
)) {
3027 ifmgd
->last_cqm_event_signal
= sig
;
3028 ieee80211_cqm_rssi_notify(
3030 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW
,
3032 } else if (sig
> thold
&&
3033 (last_event
== 0 || sig
> last_event
+ hyst
)) {
3034 ifmgd
->last_cqm_event_signal
= sig
;
3035 ieee80211_cqm_rssi_notify(
3037 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH
,
3042 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
) {
3043 mlme_dbg_ratelimited(sdata
,
3044 "cancelling AP probe due to a received beacon\n");
3045 ieee80211_reset_ap_probe(sdata
);
3049 * Push the beacon loss detection into the future since
3050 * we are processing a beacon from the AP just now.
3052 ieee80211_sta_reset_beacon_monitor(sdata
);
3054 ncrc
= crc32_be(0, (void *)&mgmt
->u
.beacon
.beacon_int
, 4);
3055 ncrc
= ieee802_11_parse_elems_crc(mgmt
->u
.beacon
.variable
,
3056 len
- baselen
, false, &elems
,
3057 care_about_ies
, ncrc
);
3059 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) {
3060 bool directed_tim
= ieee80211_check_tim(elems
.tim
,
3064 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
3065 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
3066 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
3067 ieee80211_hw_config(local
,
3068 IEEE80211_CONF_CHANGE_PS
);
3070 ieee80211_send_nullfunc(local
, sdata
, 0);
3071 } else if (!local
->pspolling
&& sdata
->u
.mgd
.powersave
) {
3072 local
->pspolling
= true;
3075 * Here is assumed that the driver will be
3076 * able to send ps-poll frame and receive a
3077 * response even though power save mode is
3078 * enabled, but some drivers might require
3079 * to disable power save here. This needs
3080 * to be investigated.
3082 ieee80211_send_pspoll(local
, sdata
);
3087 if (sdata
->vif
.p2p
) {
3088 struct ieee80211_p2p_noa_attr noa
= {};
3091 ret
= cfg80211_get_p2p_attr(mgmt
->u
.beacon
.variable
,
3093 IEEE80211_P2P_ATTR_ABSENCE_NOTICE
,
3094 (u8
*) &noa
, sizeof(noa
));
3096 if (sdata
->u
.mgd
.p2p_noa_index
!= noa
.index
) {
3097 /* valid noa_attr and index changed */
3098 sdata
->u
.mgd
.p2p_noa_index
= noa
.index
;
3099 memcpy(&bss_conf
->p2p_noa_attr
, &noa
, sizeof(noa
));
3100 changed
|= BSS_CHANGED_P2P_PS
;
3102 * make sure we update all information, the CRC
3103 * mechanism doesn't look at P2P attributes.
3105 ifmgd
->beacon_crc_valid
= false;
3107 } else if (sdata
->u
.mgd
.p2p_noa_index
!= -1) {
3108 /* noa_attr not found and we had valid noa_attr before */
3109 sdata
->u
.mgd
.p2p_noa_index
= -1;
3110 memset(&bss_conf
->p2p_noa_attr
, 0, sizeof(bss_conf
->p2p_noa_attr
));
3111 changed
|= BSS_CHANGED_P2P_PS
;
3112 ifmgd
->beacon_crc_valid
= false;
3116 if (ncrc
== ifmgd
->beacon_crc
&& ifmgd
->beacon_crc_valid
)
3118 ifmgd
->beacon_crc
= ncrc
;
3119 ifmgd
->beacon_crc_valid
= true;
3121 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
3123 ieee80211_sta_process_chanswitch(sdata
, rx_status
->mactime
,
3126 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) &&
3127 ieee80211_sta_wmm_params(local
, sdata
, elems
.wmm_param
,
3128 elems
.wmm_param_len
))
3129 changed
|= BSS_CHANGED_QOS
;
3132 * If we haven't had a beacon before, tell the driver about the
3133 * DTIM period (and beacon timing if desired) now.
3135 if (!ifmgd
->have_beacon
) {
3136 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3138 bss_conf
->dtim_period
= elems
.tim
->dtim_period
?: 1;
3140 bss_conf
->dtim_period
= 1;
3142 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
3143 sdata
->vif
.bss_conf
.sync_tsf
=
3144 le64_to_cpu(mgmt
->u
.beacon
.timestamp
);
3145 sdata
->vif
.bss_conf
.sync_device_ts
=
3146 rx_status
->device_timestamp
;
3148 sdata
->vif
.bss_conf
.sync_dtim_count
=
3149 elems
.tim
->dtim_count
;
3151 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
3154 changed
|= BSS_CHANGED_BEACON_INFO
;
3155 ifmgd
->have_beacon
= true;
3157 mutex_lock(&local
->iflist_mtx
);
3158 ieee80211_recalc_ps(local
, -1);
3159 mutex_unlock(&local
->iflist_mtx
);
3161 ieee80211_recalc_ps_vif(sdata
);
3164 if (elems
.erp_info
) {
3166 erp_value
= elems
.erp_info
[0];
3170 changed
|= ieee80211_handle_bss_capability(sdata
,
3171 le16_to_cpu(mgmt
->u
.beacon
.capab_info
),
3172 erp_valid
, erp_value
);
3174 mutex_lock(&local
->sta_mtx
);
3175 sta
= sta_info_get(sdata
, bssid
);
3177 if (ieee80211_config_bw(sdata
, sta
, elems
.ht_operation
,
3178 elems
.vht_operation
, bssid
, &changed
)) {
3179 mutex_unlock(&local
->sta_mtx
);
3180 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
3181 WLAN_REASON_DEAUTH_LEAVING
,
3183 cfg80211_tx_mlme_mgmt(sdata
->dev
, deauth_buf
,
3184 sizeof(deauth_buf
));
3188 if (sta
&& elems
.opmode_notif
)
3189 ieee80211_vht_handle_opmode(sdata
, sta
, *elems
.opmode_notif
,
3190 rx_status
->band
, true);
3191 mutex_unlock(&local
->sta_mtx
);
3193 if (elems
.country_elem
&& elems
.pwr_constr_elem
&&
3194 mgmt
->u
.probe_resp
.capab_info
&
3195 cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT
))
3196 changed
|= ieee80211_handle_pwr_constr(sdata
, chan
,
3198 elems
.country_elem_len
,
3199 elems
.pwr_constr_elem
);
3201 ieee80211_bss_info_change_notify(sdata
, changed
);
3204 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data
*sdata
,
3205 struct sk_buff
*skb
)
3207 struct ieee80211_rx_status
*rx_status
;
3208 struct ieee80211_mgmt
*mgmt
;
3210 struct ieee802_11_elems elems
;
3213 rx_status
= (struct ieee80211_rx_status
*) skb
->cb
;
3214 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
3215 fc
= le16_to_cpu(mgmt
->frame_control
);
3219 switch (fc
& IEEE80211_FCTL_STYPE
) {
3220 case IEEE80211_STYPE_BEACON
:
3221 ieee80211_rx_mgmt_beacon(sdata
, mgmt
, skb
->len
, rx_status
);
3223 case IEEE80211_STYPE_PROBE_RESP
:
3224 ieee80211_rx_mgmt_probe_resp(sdata
, skb
);
3226 case IEEE80211_STYPE_AUTH
:
3227 ieee80211_rx_mgmt_auth(sdata
, mgmt
, skb
->len
);
3229 case IEEE80211_STYPE_DEAUTH
:
3230 ieee80211_rx_mgmt_deauth(sdata
, mgmt
, skb
->len
);
3232 case IEEE80211_STYPE_DISASSOC
:
3233 ieee80211_rx_mgmt_disassoc(sdata
, mgmt
, skb
->len
);
3235 case IEEE80211_STYPE_ASSOC_RESP
:
3236 case IEEE80211_STYPE_REASSOC_RESP
:
3237 ieee80211_rx_mgmt_assoc_resp(sdata
, mgmt
, skb
->len
);
3239 case IEEE80211_STYPE_ACTION
:
3240 if (mgmt
->u
.action
.category
== WLAN_CATEGORY_SPECTRUM_MGMT
) {
3241 ies_len
= skb
->len
-
3242 offsetof(struct ieee80211_mgmt
,
3243 u
.action
.u
.chan_switch
.variable
);
3248 ieee802_11_parse_elems(
3249 mgmt
->u
.action
.u
.chan_switch
.variable
,
3250 ies_len
, true, &elems
);
3252 if (elems
.parse_error
)
3255 ieee80211_sta_process_chanswitch(sdata
,
3258 } else if (mgmt
->u
.action
.category
== WLAN_CATEGORY_PUBLIC
) {
3259 ies_len
= skb
->len
-
3260 offsetof(struct ieee80211_mgmt
,
3261 u
.action
.u
.ext_chan_switch
.variable
);
3266 ieee802_11_parse_elems(
3267 mgmt
->u
.action
.u
.ext_chan_switch
.variable
,
3268 ies_len
, true, &elems
);
3270 if (elems
.parse_error
)
3273 /* for the handling code pretend this was also an IE */
3274 elems
.ext_chansw_ie
=
3275 &mgmt
->u
.action
.u
.ext_chan_switch
.data
;
3277 ieee80211_sta_process_chanswitch(sdata
,
3283 sdata_unlock(sdata
);
3286 static void ieee80211_sta_timer(unsigned long data
)
3288 struct ieee80211_sub_if_data
*sdata
=
3289 (struct ieee80211_sub_if_data
*) data
;
3291 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
3294 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data
*sdata
,
3295 u8
*bssid
, u8 reason
, bool tx
)
3297 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
3299 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
, reason
,
3302 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
3303 IEEE80211_DEAUTH_FRAME_LEN
);
3306 static int ieee80211_probe_auth(struct ieee80211_sub_if_data
*sdata
)
3308 struct ieee80211_local
*local
= sdata
->local
;
3309 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3310 struct ieee80211_mgd_auth_data
*auth_data
= ifmgd
->auth_data
;
3313 sdata_assert_lock(sdata
);
3315 if (WARN_ON_ONCE(!auth_data
))
3320 if (auth_data
->tries
> IEEE80211_AUTH_MAX_TRIES
) {
3321 sdata_info(sdata
, "authentication with %pM timed out\n",
3322 auth_data
->bss
->bssid
);
3325 * Most likely AP is not in the range so remove the
3326 * bss struct for that AP.
3328 cfg80211_unlink_bss(local
->hw
.wiphy
, auth_data
->bss
);
3333 drv_mgd_prepare_tx(local
, sdata
);
3335 if (auth_data
->bss
->proberesp_ies
) {
3339 sdata_info(sdata
, "send auth to %pM (try %d/%d)\n",
3340 auth_data
->bss
->bssid
, auth_data
->tries
,
3341 IEEE80211_AUTH_MAX_TRIES
);
3343 auth_data
->expected_transaction
= 2;
3345 if (auth_data
->algorithm
== WLAN_AUTH_SAE
) {
3346 trans
= auth_data
->sae_trans
;
3347 status
= auth_data
->sae_status
;
3348 auth_data
->expected_transaction
= trans
;
3351 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
3352 tx_flags
= IEEE80211_TX_CTL_REQ_TX_STATUS
|
3353 IEEE80211_TX_INTFL_MLME_CONN_TX
;
3355 ieee80211_send_auth(sdata
, trans
, auth_data
->algorithm
, status
,
3356 auth_data
->data
, auth_data
->data_len
,
3357 auth_data
->bss
->bssid
,
3358 auth_data
->bss
->bssid
, NULL
, 0, 0,
3363 sdata_info(sdata
, "direct probe to %pM (try %d/%i)\n",
3364 auth_data
->bss
->bssid
, auth_data
->tries
,
3365 IEEE80211_AUTH_MAX_TRIES
);
3368 ssidie
= ieee80211_bss_get_ie(auth_data
->bss
, WLAN_EID_SSID
);
3374 * Direct probe is sent to broadcast address as some APs
3375 * will not answer to direct packet in unassociated state.
3377 ieee80211_send_probe_req(sdata
, NULL
, ssidie
+ 2, ssidie
[1],
3378 NULL
, 0, (u32
) -1, true, 0,
3379 auth_data
->bss
->channel
, false);
3383 if (tx_flags
== 0) {
3384 auth_data
->timeout
= jiffies
+ IEEE80211_AUTH_TIMEOUT
;
3385 auth_data
->timeout_started
= true;
3386 run_again(sdata
, auth_data
->timeout
);
3388 auth_data
->timeout
=
3389 round_jiffies_up(jiffies
+ IEEE80211_AUTH_TIMEOUT_LONG
);
3390 auth_data
->timeout_started
= true;
3391 run_again(sdata
, auth_data
->timeout
);
3397 static int ieee80211_do_assoc(struct ieee80211_sub_if_data
*sdata
)
3399 struct ieee80211_mgd_assoc_data
*assoc_data
= sdata
->u
.mgd
.assoc_data
;
3400 struct ieee80211_local
*local
= sdata
->local
;
3402 sdata_assert_lock(sdata
);
3404 assoc_data
->tries
++;
3405 if (assoc_data
->tries
> IEEE80211_ASSOC_MAX_TRIES
) {
3406 sdata_info(sdata
, "association with %pM timed out\n",
3407 assoc_data
->bss
->bssid
);
3410 * Most likely AP is not in the range so remove the
3411 * bss struct for that AP.
3413 cfg80211_unlink_bss(local
->hw
.wiphy
, assoc_data
->bss
);
3418 sdata_info(sdata
, "associate with %pM (try %d/%d)\n",
3419 assoc_data
->bss
->bssid
, assoc_data
->tries
,
3420 IEEE80211_ASSOC_MAX_TRIES
);
3421 ieee80211_send_assoc(sdata
);
3423 if (!(local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)) {
3424 assoc_data
->timeout
= jiffies
+ IEEE80211_ASSOC_TIMEOUT
;
3425 assoc_data
->timeout_started
= true;
3426 run_again(sdata
, assoc_data
->timeout
);
3428 assoc_data
->timeout
=
3429 round_jiffies_up(jiffies
+
3430 IEEE80211_ASSOC_TIMEOUT_LONG
);
3431 assoc_data
->timeout_started
= true;
3432 run_again(sdata
, assoc_data
->timeout
);
3438 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data
*sdata
,
3439 __le16 fc
, bool acked
)
3441 struct ieee80211_local
*local
= sdata
->local
;
3443 sdata
->u
.mgd
.status_fc
= fc
;
3444 sdata
->u
.mgd
.status_acked
= acked
;
3445 sdata
->u
.mgd
.status_received
= true;
3447 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
3450 void ieee80211_sta_work(struct ieee80211_sub_if_data
*sdata
)
3452 struct ieee80211_local
*local
= sdata
->local
;
3453 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3457 if (ifmgd
->status_received
) {
3458 __le16 fc
= ifmgd
->status_fc
;
3459 bool status_acked
= ifmgd
->status_acked
;
3461 ifmgd
->status_received
= false;
3462 if (ifmgd
->auth_data
&&
3463 (ieee80211_is_probe_req(fc
) || ieee80211_is_auth(fc
))) {
3465 ifmgd
->auth_data
->timeout
=
3466 jiffies
+ IEEE80211_AUTH_TIMEOUT_SHORT
;
3467 run_again(sdata
, ifmgd
->auth_data
->timeout
);
3469 ifmgd
->auth_data
->timeout
= jiffies
- 1;
3471 ifmgd
->auth_data
->timeout_started
= true;
3472 } else if (ifmgd
->assoc_data
&&
3473 (ieee80211_is_assoc_req(fc
) ||
3474 ieee80211_is_reassoc_req(fc
))) {
3476 ifmgd
->assoc_data
->timeout
=
3477 jiffies
+ IEEE80211_ASSOC_TIMEOUT_SHORT
;
3478 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
3480 ifmgd
->assoc_data
->timeout
= jiffies
- 1;
3482 ifmgd
->assoc_data
->timeout_started
= true;
3486 if (ifmgd
->auth_data
&& ifmgd
->auth_data
->timeout_started
&&
3487 time_after(jiffies
, ifmgd
->auth_data
->timeout
)) {
3488 if (ifmgd
->auth_data
->done
) {
3490 * ok ... we waited for assoc but userspace didn't,
3491 * so let's just kill the auth data
3493 ieee80211_destroy_auth_data(sdata
, false);
3494 } else if (ieee80211_probe_auth(sdata
)) {
3497 memcpy(bssid
, ifmgd
->auth_data
->bss
->bssid
, ETH_ALEN
);
3499 ieee80211_destroy_auth_data(sdata
, false);
3501 cfg80211_auth_timeout(sdata
->dev
, bssid
);
3503 } else if (ifmgd
->auth_data
&& ifmgd
->auth_data
->timeout_started
)
3504 run_again(sdata
, ifmgd
->auth_data
->timeout
);
3506 if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->timeout_started
&&
3507 time_after(jiffies
, ifmgd
->assoc_data
->timeout
)) {
3508 if ((ifmgd
->assoc_data
->need_beacon
&& !ifmgd
->have_beacon
) ||
3509 ieee80211_do_assoc(sdata
)) {
3510 struct cfg80211_bss
*bss
= ifmgd
->assoc_data
->bss
;
3512 ieee80211_destroy_assoc_data(sdata
, false);
3513 cfg80211_assoc_timeout(sdata
->dev
, bss
);
3515 } else if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->timeout_started
)
3516 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
3518 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
&&
3519 ifmgd
->associated
) {
3523 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
3525 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
3526 max_tries
= max_nullfunc_tries
;
3528 max_tries
= max_probe_tries
;
3530 /* ACK received for nullfunc probing frame */
3531 if (!ifmgd
->probe_send_count
)
3532 ieee80211_reset_ap_probe(sdata
);
3533 else if (ifmgd
->nullfunc_failed
) {
3534 if (ifmgd
->probe_send_count
< max_tries
) {
3536 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3537 bssid
, ifmgd
->probe_send_count
,
3539 ieee80211_mgd_probe_ap_send(sdata
);
3542 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3544 ieee80211_sta_connection_lost(sdata
, bssid
,
3545 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
3548 } else if (time_is_after_jiffies(ifmgd
->probe_timeout
))
3549 run_again(sdata
, ifmgd
->probe_timeout
);
3550 else if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) {
3552 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3553 bssid
, probe_wait_ms
);
3554 ieee80211_sta_connection_lost(sdata
, bssid
,
3555 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
, false);
3556 } else if (ifmgd
->probe_send_count
< max_tries
) {
3558 "No probe response from AP %pM after %dms, try %d/%i\n",
3559 bssid
, probe_wait_ms
,
3560 ifmgd
->probe_send_count
, max_tries
);
3561 ieee80211_mgd_probe_ap_send(sdata
);
3564 * We actually lost the connection ... or did we?
3567 wiphy_debug(local
->hw
.wiphy
,
3568 "%s: No probe response from AP %pM"
3569 " after %dms, disconnecting.\n",
3571 bssid
, probe_wait_ms
);
3573 ieee80211_sta_connection_lost(sdata
, bssid
,
3574 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
, false);
3578 sdata_unlock(sdata
);
3581 static void ieee80211_sta_bcn_mon_timer(unsigned long data
)
3583 struct ieee80211_sub_if_data
*sdata
=
3584 (struct ieee80211_sub_if_data
*) data
;
3585 struct ieee80211_local
*local
= sdata
->local
;
3587 if (local
->quiescing
)
3590 if (sdata
->vif
.csa_active
)
3593 sdata
->u
.mgd
.connection_loss
= false;
3594 ieee80211_queue_work(&sdata
->local
->hw
,
3595 &sdata
->u
.mgd
.beacon_connection_loss_work
);
3598 static void ieee80211_sta_conn_mon_timer(unsigned long data
)
3600 struct ieee80211_sub_if_data
*sdata
=
3601 (struct ieee80211_sub_if_data
*) data
;
3602 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3603 struct ieee80211_local
*local
= sdata
->local
;
3605 if (local
->quiescing
)
3608 if (sdata
->vif
.csa_active
)
3611 ieee80211_queue_work(&local
->hw
, &ifmgd
->monitor_work
);
3614 static void ieee80211_sta_monitor_work(struct work_struct
*work
)
3616 struct ieee80211_sub_if_data
*sdata
=
3617 container_of(work
, struct ieee80211_sub_if_data
,
3618 u
.mgd
.monitor_work
);
3620 ieee80211_mgd_probe_ap(sdata
, false);
3623 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data
*sdata
)
3627 if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
) {
3628 __ieee80211_stop_poll(sdata
);
3630 /* let's probe the connection once */
3631 flags
= sdata
->local
->hw
.flags
;
3632 if (!(flags
& IEEE80211_HW_CONNECTION_MONITOR
))
3633 ieee80211_queue_work(&sdata
->local
->hw
,
3634 &sdata
->u
.mgd
.monitor_work
);
3635 /* and do all the other regular work too */
3636 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
3641 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data
*sdata
)
3643 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3644 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
3648 if (ifmgd
->auth_data
|| ifmgd
->assoc_data
) {
3649 const u8
*bssid
= ifmgd
->auth_data
?
3650 ifmgd
->auth_data
->bss
->bssid
:
3651 ifmgd
->assoc_data
->bss
->bssid
;
3654 * If we are trying to authenticate / associate while suspending,
3655 * cfg80211 won't know and won't actually abort those attempts,
3656 * thus we need to do that ourselves.
3658 ieee80211_send_deauth_disassoc(sdata
, bssid
,
3659 IEEE80211_STYPE_DEAUTH
,
3660 WLAN_REASON_DEAUTH_LEAVING
,
3662 if (ifmgd
->assoc_data
)
3663 ieee80211_destroy_assoc_data(sdata
, false);
3664 if (ifmgd
->auth_data
)
3665 ieee80211_destroy_auth_data(sdata
, false);
3666 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
3667 IEEE80211_DEAUTH_FRAME_LEN
);
3670 sdata_unlock(sdata
);
3673 void ieee80211_sta_restart(struct ieee80211_sub_if_data
*sdata
)
3675 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3678 if (!ifmgd
->associated
) {
3679 sdata_unlock(sdata
);
3683 if (sdata
->flags
& IEEE80211_SDATA_DISCONNECT_RESUME
) {
3684 sdata
->flags
&= ~IEEE80211_SDATA_DISCONNECT_RESUME
;
3685 mlme_dbg(sdata
, "driver requested disconnect after resume\n");
3686 ieee80211_sta_connection_lost(sdata
,
3687 ifmgd
->associated
->bssid
,
3688 WLAN_REASON_UNSPECIFIED
,
3690 sdata_unlock(sdata
);
3693 sdata_unlock(sdata
);
3697 /* interface setup */
3698 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data
*sdata
)
3700 struct ieee80211_if_managed
*ifmgd
;
3702 ifmgd
= &sdata
->u
.mgd
;
3703 INIT_WORK(&ifmgd
->monitor_work
, ieee80211_sta_monitor_work
);
3704 INIT_WORK(&ifmgd
->chswitch_work
, ieee80211_chswitch_work
);
3705 INIT_WORK(&ifmgd
->beacon_connection_loss_work
,
3706 ieee80211_beacon_connection_loss_work
);
3707 INIT_WORK(&ifmgd
->csa_connection_drop_work
,
3708 ieee80211_csa_connection_drop_work
);
3709 INIT_WORK(&ifmgd
->request_smps_work
, ieee80211_request_smps_mgd_work
);
3710 INIT_DELAYED_WORK(&ifmgd
->tdls_peer_del_work
,
3711 ieee80211_tdls_peer_del_work
);
3712 setup_timer(&ifmgd
->timer
, ieee80211_sta_timer
,
3713 (unsigned long) sdata
);
3714 setup_timer(&ifmgd
->bcn_mon_timer
, ieee80211_sta_bcn_mon_timer
,
3715 (unsigned long) sdata
);
3716 setup_timer(&ifmgd
->conn_mon_timer
, ieee80211_sta_conn_mon_timer
,
3717 (unsigned long) sdata
);
3718 setup_timer(&ifmgd
->chswitch_timer
, ieee80211_chswitch_timer
,
3719 (unsigned long) sdata
);
3722 ifmgd
->powersave
= sdata
->wdev
.ps
;
3723 ifmgd
->uapsd_queues
= sdata
->local
->hw
.uapsd_queues
;
3724 ifmgd
->uapsd_max_sp_len
= sdata
->local
->hw
.uapsd_max_sp_len
;
3725 ifmgd
->p2p_noa_index
= -1;
3727 if (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
)
3728 ifmgd
->req_smps
= IEEE80211_SMPS_AUTOMATIC
;
3730 ifmgd
->req_smps
= IEEE80211_SMPS_OFF
;
3733 /* scan finished notification */
3734 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local
*local
)
3736 struct ieee80211_sub_if_data
*sdata
;
3738 /* Restart STA timers */
3740 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
3741 if (ieee80211_sdata_running(sdata
))
3742 ieee80211_restart_sta_timer(sdata
);
3747 int ieee80211_max_network_latency(struct notifier_block
*nb
,
3748 unsigned long data
, void *dummy
)
3750 s32 latency_usec
= (s32
) data
;
3751 struct ieee80211_local
*local
=
3752 container_of(nb
, struct ieee80211_local
,
3753 network_latency_notifier
);
3755 mutex_lock(&local
->iflist_mtx
);
3756 ieee80211_recalc_ps(local
, latency_usec
);
3757 mutex_unlock(&local
->iflist_mtx
);
3762 static u8
ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data
*sdata
,
3763 struct cfg80211_bss
*cbss
)
3765 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3766 const u8
*ht_cap_ie
, *vht_cap_ie
;
3767 const struct ieee80211_ht_cap
*ht_cap
;
3768 const struct ieee80211_vht_cap
*vht_cap
;
3771 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)
3774 ht_cap_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_CAPABILITY
);
3775 if (ht_cap_ie
&& ht_cap_ie
[1] >= sizeof(*ht_cap
)) {
3776 ht_cap
= (void *)(ht_cap_ie
+ 2);
3777 chains
= ieee80211_mcs_to_chains(&ht_cap
->mcs
);
3779 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
3780 * "Tx Unequal Modulation Supported" fields.
3784 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)
3787 vht_cap_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_VHT_CAPABILITY
);
3788 if (vht_cap_ie
&& vht_cap_ie
[1] >= sizeof(*vht_cap
)) {
3792 vht_cap
= (void *)(vht_cap_ie
+ 2);
3793 tx_mcs_map
= le16_to_cpu(vht_cap
->supp_mcs
.tx_mcs_map
);
3794 for (nss
= 8; nss
> 0; nss
--) {
3795 if (((tx_mcs_map
>> (2 * (nss
- 1))) & 3) !=
3796 IEEE80211_VHT_MCS_NOT_SUPPORTED
)
3799 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
3800 chains
= max(chains
, nss
);
3806 static int ieee80211_prep_channel(struct ieee80211_sub_if_data
*sdata
,
3807 struct cfg80211_bss
*cbss
)
3809 struct ieee80211_local
*local
= sdata
->local
;
3810 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3811 const struct ieee80211_ht_operation
*ht_oper
= NULL
;
3812 const struct ieee80211_vht_operation
*vht_oper
= NULL
;
3813 struct ieee80211_supported_band
*sband
;
3814 struct cfg80211_chan_def chandef
;
3817 sband
= local
->hw
.wiphy
->bands
[cbss
->channel
->band
];
3819 ifmgd
->flags
&= ~(IEEE80211_STA_DISABLE_40MHZ
|
3820 IEEE80211_STA_DISABLE_80P80MHZ
|
3821 IEEE80211_STA_DISABLE_160MHZ
);
3825 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
3826 sband
->ht_cap
.ht_supported
) {
3827 const u8
*ht_oper_ie
, *ht_cap
;
3829 ht_oper_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_OPERATION
);
3830 if (ht_oper_ie
&& ht_oper_ie
[1] >= sizeof(*ht_oper
))
3831 ht_oper
= (void *)(ht_oper_ie
+ 2);
3833 ht_cap
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_CAPABILITY
);
3834 if (!ht_cap
|| ht_cap
[1] < sizeof(struct ieee80211_ht_cap
)) {
3835 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
3840 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
3841 sband
->vht_cap
.vht_supported
) {
3842 const u8
*vht_oper_ie
, *vht_cap
;
3844 vht_oper_ie
= ieee80211_bss_get_ie(cbss
,
3845 WLAN_EID_VHT_OPERATION
);
3846 if (vht_oper_ie
&& vht_oper_ie
[1] >= sizeof(*vht_oper
))
3847 vht_oper
= (void *)(vht_oper_ie
+ 2);
3848 if (vht_oper
&& !ht_oper
) {
3851 "AP advertised VHT without HT, disabling both\n");
3852 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
3853 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
3856 vht_cap
= ieee80211_bss_get_ie(cbss
, WLAN_EID_VHT_CAPABILITY
);
3857 if (!vht_cap
|| vht_cap
[1] < sizeof(struct ieee80211_vht_cap
)) {
3858 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
3863 ifmgd
->flags
|= ieee80211_determine_chantype(sdata
, sband
,
3868 sdata
->needed_rx_chains
= min(ieee80211_ht_vht_rx_chains(sdata
, cbss
),
3873 /* will change later if needed */
3874 sdata
->smps_mode
= IEEE80211_SMPS_OFF
;
3876 mutex_lock(&local
->mtx
);
3878 * If this fails (possibly due to channel context sharing
3879 * on incompatible channels, e.g. 80+80 and 160 sharing the
3880 * same control channel) try to use a smaller bandwidth.
3882 ret
= ieee80211_vif_use_channel(sdata
, &chandef
,
3883 IEEE80211_CHANCTX_SHARED
);
3885 /* don't downgrade for 5 and 10 MHz channels, though. */
3886 if (chandef
.width
== NL80211_CHAN_WIDTH_5
||
3887 chandef
.width
== NL80211_CHAN_WIDTH_10
)
3890 while (ret
&& chandef
.width
!= NL80211_CHAN_WIDTH_20_NOHT
) {
3891 ifmgd
->flags
|= ieee80211_chandef_downgrade(&chandef
);
3892 ret
= ieee80211_vif_use_channel(sdata
, &chandef
,
3893 IEEE80211_CHANCTX_SHARED
);
3896 mutex_unlock(&local
->mtx
);
3900 static int ieee80211_prep_connection(struct ieee80211_sub_if_data
*sdata
,
3901 struct cfg80211_bss
*cbss
, bool assoc
)
3903 struct ieee80211_local
*local
= sdata
->local
;
3904 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3905 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
3906 struct sta_info
*new_sta
= NULL
;
3907 bool have_sta
= false;
3910 if (WARN_ON(!ifmgd
->auth_data
&& !ifmgd
->assoc_data
))
3915 have_sta
= sta_info_get(sdata
, cbss
->bssid
);
3920 new_sta
= sta_info_alloc(sdata
, cbss
->bssid
, GFP_KERNEL
);
3925 u32 rates
= 0, basic_rates
= 0;
3926 bool have_higher_than_11mbit
;
3927 int min_rate
= INT_MAX
, min_rate_index
= -1;
3928 struct ieee80211_chanctx_conf
*chanctx_conf
;
3929 struct ieee80211_supported_band
*sband
;
3930 const struct cfg80211_bss_ies
*ies
;
3934 sband
= local
->hw
.wiphy
->bands
[cbss
->channel
->band
];
3936 err
= ieee80211_prep_channel(sdata
, cbss
);
3938 sta_info_free(local
, new_sta
);
3941 shift
= ieee80211_vif_get_shift(&sdata
->vif
);
3944 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3945 if (WARN_ON(!chanctx_conf
)) {
3947 sta_info_free(local
, new_sta
);
3950 rate_flags
= ieee80211_chandef_rate_flags(&chanctx_conf
->def
);
3953 ieee80211_get_rates(sband
, bss
->supp_rates
,
3954 bss
->supp_rates_len
,
3955 &rates
, &basic_rates
,
3956 &have_higher_than_11mbit
,
3957 &min_rate
, &min_rate_index
,
3961 * This used to be a workaround for basic rates missing
3962 * in the association response frame. Now that we no
3963 * longer use the basic rates from there, it probably
3964 * doesn't happen any more, but keep the workaround so
3965 * in case some *other* APs are buggy in different ways
3966 * we can connect -- with a warning.
3968 if (!basic_rates
&& min_rate_index
>= 0) {
3970 "No basic rates, using min rate instead\n");
3971 basic_rates
= BIT(min_rate_index
);
3974 new_sta
->sta
.supp_rates
[cbss
->channel
->band
] = rates
;
3975 sdata
->vif
.bss_conf
.basic_rates
= basic_rates
;
3977 /* cf. IEEE 802.11 9.2.12 */
3978 if (cbss
->channel
->band
== IEEE80211_BAND_2GHZ
&&
3979 have_higher_than_11mbit
)
3980 sdata
->flags
|= IEEE80211_SDATA_OPERATING_GMODE
;
3982 sdata
->flags
&= ~IEEE80211_SDATA_OPERATING_GMODE
;
3984 memcpy(ifmgd
->bssid
, cbss
->bssid
, ETH_ALEN
);
3986 /* set timing information */
3987 sdata
->vif
.bss_conf
.beacon_int
= cbss
->beacon_interval
;
3989 ies
= rcu_dereference(cbss
->beacon_ies
);
3993 sdata
->vif
.bss_conf
.sync_tsf
= ies
->tsf
;
3994 sdata
->vif
.bss_conf
.sync_device_ts
=
3995 bss
->device_ts_beacon
;
3996 tim_ie
= cfg80211_find_ie(WLAN_EID_TIM
,
3997 ies
->data
, ies
->len
);
3998 if (tim_ie
&& tim_ie
[1] >= 2)
3999 sdata
->vif
.bss_conf
.sync_dtim_count
= tim_ie
[2];
4001 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
4002 } else if (!(local
->hw
.flags
&
4003 IEEE80211_HW_TIMING_BEACON_ONLY
)) {
4004 ies
= rcu_dereference(cbss
->proberesp_ies
);
4005 /* must be non-NULL since beacon IEs were NULL */
4006 sdata
->vif
.bss_conf
.sync_tsf
= ies
->tsf
;
4007 sdata
->vif
.bss_conf
.sync_device_ts
=
4008 bss
->device_ts_presp
;
4009 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
4011 sdata
->vif
.bss_conf
.sync_tsf
= 0;
4012 sdata
->vif
.bss_conf
.sync_device_ts
= 0;
4013 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
4017 /* tell driver about BSSID, basic rates and timing */
4018 ieee80211_bss_info_change_notify(sdata
,
4019 BSS_CHANGED_BSSID
| BSS_CHANGED_BASIC_RATES
|
4020 BSS_CHANGED_BEACON_INT
);
4023 sta_info_pre_move_state(new_sta
, IEEE80211_STA_AUTH
);
4025 err
= sta_info_insert(new_sta
);
4029 "failed to insert STA entry for the AP (error %d)\n",
4034 WARN_ON_ONCE(!ether_addr_equal(ifmgd
->bssid
, cbss
->bssid
));
4040 int ieee80211_mgd_auth(struct ieee80211_sub_if_data
*sdata
,
4041 struct cfg80211_auth_request
*req
)
4043 struct ieee80211_local
*local
= sdata
->local
;
4044 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4045 struct ieee80211_mgd_auth_data
*auth_data
;
4049 /* prepare auth data structure */
4051 switch (req
->auth_type
) {
4052 case NL80211_AUTHTYPE_OPEN_SYSTEM
:
4053 auth_alg
= WLAN_AUTH_OPEN
;
4055 case NL80211_AUTHTYPE_SHARED_KEY
:
4056 if (IS_ERR(local
->wep_tx_tfm
))
4058 auth_alg
= WLAN_AUTH_SHARED_KEY
;
4060 case NL80211_AUTHTYPE_FT
:
4061 auth_alg
= WLAN_AUTH_FT
;
4063 case NL80211_AUTHTYPE_NETWORK_EAP
:
4064 auth_alg
= WLAN_AUTH_LEAP
;
4066 case NL80211_AUTHTYPE_SAE
:
4067 auth_alg
= WLAN_AUTH_SAE
;
4073 auth_data
= kzalloc(sizeof(*auth_data
) + req
->sae_data_len
+
4074 req
->ie_len
, GFP_KERNEL
);
4078 auth_data
->bss
= req
->bss
;
4080 if (req
->sae_data_len
>= 4) {
4081 __le16
*pos
= (__le16
*) req
->sae_data
;
4082 auth_data
->sae_trans
= le16_to_cpu(pos
[0]);
4083 auth_data
->sae_status
= le16_to_cpu(pos
[1]);
4084 memcpy(auth_data
->data
, req
->sae_data
+ 4,
4085 req
->sae_data_len
- 4);
4086 auth_data
->data_len
+= req
->sae_data_len
- 4;
4089 if (req
->ie
&& req
->ie_len
) {
4090 memcpy(&auth_data
->data
[auth_data
->data_len
],
4091 req
->ie
, req
->ie_len
);
4092 auth_data
->data_len
+= req
->ie_len
;
4095 if (req
->key
&& req
->key_len
) {
4096 auth_data
->key_len
= req
->key_len
;
4097 auth_data
->key_idx
= req
->key_idx
;
4098 memcpy(auth_data
->key
, req
->key
, req
->key_len
);
4101 auth_data
->algorithm
= auth_alg
;
4103 /* try to authenticate/probe */
4105 if ((ifmgd
->auth_data
&& !ifmgd
->auth_data
->done
) ||
4106 ifmgd
->assoc_data
) {
4111 if (ifmgd
->auth_data
)
4112 ieee80211_destroy_auth_data(sdata
, false);
4114 /* prep auth_data so we don't go into idle on disassoc */
4115 ifmgd
->auth_data
= auth_data
;
4117 if (ifmgd
->associated
) {
4118 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4120 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4121 WLAN_REASON_UNSPECIFIED
,
4124 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4128 sdata_info(sdata
, "authenticate with %pM\n", req
->bss
->bssid
);
4130 err
= ieee80211_prep_connection(sdata
, req
->bss
, false);
4134 err
= ieee80211_probe_auth(sdata
);
4136 sta_info_destroy_addr(sdata
, req
->bss
->bssid
);
4140 /* hold our own reference */
4141 cfg80211_ref_bss(local
->hw
.wiphy
, auth_data
->bss
);
4145 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
4146 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
4147 ifmgd
->auth_data
= NULL
;
4153 static bool ieee80211_usable_wmm_params(struct ieee80211_sub_if_data
*sdata
,
4154 const u8
*wmm_param
, int len
)
4162 if (wmm_param
[5] != 1 /* version */)
4165 pos
= wmm_param
+ 8;
4168 for (; left
>= 4; left
-= 4, pos
+= 4) {
4169 u8 aifsn
= pos
[0] & 0x0f;
4170 u8 ecwmin
= pos
[1] & 0x0f;
4171 u8 ecwmax
= (pos
[1] & 0xf0) >> 4;
4172 int aci
= (pos
[0] >> 5) & 0x03;
4176 "AP has invalid WMM params (AIFSN=%d for ACI %d), disabling WMM\n",
4180 if (ecwmin
> ecwmax
) {
4182 "AP has invalid WMM params (ECWmin/max=%d/%d for ACI %d), disabling WMM\n",
4183 ecwmin
, ecwmax
, aci
);
4191 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data
*sdata
,
4192 struct cfg80211_assoc_request
*req
)
4194 struct ieee80211_local
*local
= sdata
->local
;
4195 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4196 struct ieee80211_bss
*bss
= (void *)req
->bss
->priv
;
4197 struct ieee80211_mgd_assoc_data
*assoc_data
;
4198 const struct cfg80211_bss_ies
*beacon_ies
;
4199 struct ieee80211_supported_band
*sband
;
4200 const u8
*ssidie
, *ht_ie
, *vht_ie
;
4203 assoc_data
= kzalloc(sizeof(*assoc_data
) + req
->ie_len
, GFP_KERNEL
);
4208 ssidie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
4214 memcpy(assoc_data
->ssid
, ssidie
+ 2, ssidie
[1]);
4215 assoc_data
->ssid_len
= ssidie
[1];
4218 if (ifmgd
->associated
) {
4219 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4221 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4222 WLAN_REASON_UNSPECIFIED
,
4225 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4229 if (ifmgd
->auth_data
&& !ifmgd
->auth_data
->done
) {
4234 if (ifmgd
->assoc_data
) {
4239 if (ifmgd
->auth_data
) {
4242 /* keep sta info, bssid if matching */
4243 match
= ether_addr_equal(ifmgd
->bssid
, req
->bss
->bssid
);
4244 ieee80211_destroy_auth_data(sdata
, match
);
4247 /* prepare assoc data */
4249 ifmgd
->beacon_crc_valid
= false;
4251 assoc_data
->wmm
= bss
->wmm_used
&&
4252 (local
->hw
.queues
>= IEEE80211_NUM_ACS
);
4253 if (assoc_data
->wmm
) {
4254 /* try to check validity of WMM params IE */
4255 const struct cfg80211_bss_ies
*ies
;
4256 const u8
*wp
, *start
, *end
;
4259 ies
= rcu_dereference(req
->bss
->ies
);
4261 end
= start
+ ies
->len
;
4264 wp
= cfg80211_find_vendor_ie(
4266 WLAN_OUI_TYPE_MICROSOFT_WMM
,
4267 start
, end
- start
);
4270 start
= wp
+ wp
[1] + 2;
4271 /* if this IE is too short, try the next */
4274 /* if this IE is WMM params, we found what we wanted */
4279 if (!wp
|| !ieee80211_usable_wmm_params(sdata
, wp
+ 2,
4281 assoc_data
->wmm
= false;
4282 ifmgd
->flags
|= IEEE80211_STA_DISABLE_WMM
;
4288 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4289 * We still associate in non-HT mode (11a/b/g) if any one of these
4290 * ciphers is configured as pairwise.
4291 * We can set this to true for non-11n hardware, that'll be checked
4292 * separately along with the peer capabilities.
4294 for (i
= 0; i
< req
->crypto
.n_ciphers_pairwise
; i
++) {
4295 if (req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP40
||
4296 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_TKIP
||
4297 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP104
) {
4298 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4299 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4300 netdev_info(sdata
->dev
,
4301 "disabling HT/VHT due to WEP/TKIP use\n");
4305 if (req
->flags
& ASSOC_REQ_DISABLE_HT
) {
4306 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4307 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4310 if (req
->flags
& ASSOC_REQ_DISABLE_VHT
)
4311 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4313 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4314 sband
= local
->hw
.wiphy
->bands
[req
->bss
->channel
->band
];
4315 if (!sband
->ht_cap
.ht_supported
||
4316 local
->hw
.queues
< IEEE80211_NUM_ACS
|| !bss
->wmm_used
||
4317 ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) {
4318 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4319 if (!bss
->wmm_used
&&
4320 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
))
4321 netdev_info(sdata
->dev
,
4322 "disabling HT as WMM/QoS is not supported by the AP\n");
4325 /* disable VHT if we don't support it or the AP doesn't use WMM */
4326 if (!sband
->vht_cap
.vht_supported
||
4327 local
->hw
.queues
< IEEE80211_NUM_ACS
|| !bss
->wmm_used
||
4328 ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) {
4329 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4330 if (!bss
->wmm_used
&&
4331 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
))
4332 netdev_info(sdata
->dev
,
4333 "disabling VHT as WMM/QoS is not supported by the AP\n");
4336 memcpy(&ifmgd
->ht_capa
, &req
->ht_capa
, sizeof(ifmgd
->ht_capa
));
4337 memcpy(&ifmgd
->ht_capa_mask
, &req
->ht_capa_mask
,
4338 sizeof(ifmgd
->ht_capa_mask
));
4340 memcpy(&ifmgd
->vht_capa
, &req
->vht_capa
, sizeof(ifmgd
->vht_capa
));
4341 memcpy(&ifmgd
->vht_capa_mask
, &req
->vht_capa_mask
,
4342 sizeof(ifmgd
->vht_capa_mask
));
4344 if (req
->ie
&& req
->ie_len
) {
4345 memcpy(assoc_data
->ie
, req
->ie
, req
->ie_len
);
4346 assoc_data
->ie_len
= req
->ie_len
;
4349 assoc_data
->bss
= req
->bss
;
4351 if (ifmgd
->req_smps
== IEEE80211_SMPS_AUTOMATIC
) {
4352 if (ifmgd
->powersave
)
4353 sdata
->smps_mode
= IEEE80211_SMPS_DYNAMIC
;
4355 sdata
->smps_mode
= IEEE80211_SMPS_OFF
;
4357 sdata
->smps_mode
= ifmgd
->req_smps
;
4359 assoc_data
->capability
= req
->bss
->capability
;
4360 assoc_data
->supp_rates
= bss
->supp_rates
;
4361 assoc_data
->supp_rates_len
= bss
->supp_rates_len
;
4364 ht_ie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_HT_OPERATION
);
4365 if (ht_ie
&& ht_ie
[1] >= sizeof(struct ieee80211_ht_operation
))
4366 assoc_data
->ap_ht_param
=
4367 ((struct ieee80211_ht_operation
*)(ht_ie
+ 2))->ht_param
;
4369 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4370 vht_ie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_VHT_CAPABILITY
);
4371 if (vht_ie
&& vht_ie
[1] >= sizeof(struct ieee80211_vht_cap
))
4372 memcpy(&assoc_data
->ap_vht_cap
, vht_ie
+ 2,
4373 sizeof(struct ieee80211_vht_cap
));
4375 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4378 if (bss
->wmm_used
&& bss
->uapsd_supported
&&
4379 (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_UAPSD
) &&
4380 sdata
->wmm_acm
!= 0xff) {
4381 assoc_data
->uapsd
= true;
4382 ifmgd
->flags
|= IEEE80211_STA_UAPSD_ENABLED
;
4384 assoc_data
->uapsd
= false;
4385 ifmgd
->flags
&= ~IEEE80211_STA_UAPSD_ENABLED
;
4388 if (req
->prev_bssid
)
4389 memcpy(assoc_data
->prev_bssid
, req
->prev_bssid
, ETH_ALEN
);
4392 ifmgd
->mfp
= IEEE80211_MFP_REQUIRED
;
4393 ifmgd
->flags
|= IEEE80211_STA_MFP_ENABLED
;
4395 ifmgd
->mfp
= IEEE80211_MFP_DISABLED
;
4396 ifmgd
->flags
&= ~IEEE80211_STA_MFP_ENABLED
;
4399 if (req
->crypto
.control_port
)
4400 ifmgd
->flags
|= IEEE80211_STA_CONTROL_PORT
;
4402 ifmgd
->flags
&= ~IEEE80211_STA_CONTROL_PORT
;
4404 sdata
->control_port_protocol
= req
->crypto
.control_port_ethertype
;
4405 sdata
->control_port_no_encrypt
= req
->crypto
.control_port_no_encrypt
;
4406 sdata
->encrypt_headroom
= ieee80211_cs_headroom(local
, &req
->crypto
,
4409 /* kick off associate process */
4411 ifmgd
->assoc_data
= assoc_data
;
4412 ifmgd
->dtim_period
= 0;
4413 ifmgd
->have_beacon
= false;
4415 err
= ieee80211_prep_connection(sdata
, req
->bss
, true);
4420 beacon_ies
= rcu_dereference(req
->bss
->beacon_ies
);
4422 if (sdata
->local
->hw
.flags
& IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC
&&
4425 * Wait up to one beacon interval ...
4426 * should this be more if we miss one?
4428 sdata_info(sdata
, "waiting for beacon from %pM\n",
4430 assoc_data
->timeout
= TU_TO_EXP_TIME(req
->bss
->beacon_interval
);
4431 assoc_data
->timeout_started
= true;
4432 assoc_data
->need_beacon
= true;
4433 } else if (beacon_ies
) {
4434 const u8
*tim_ie
= cfg80211_find_ie(WLAN_EID_TIM
,
4439 if (tim_ie
&& tim_ie
[1] >= sizeof(struct ieee80211_tim_ie
)) {
4440 const struct ieee80211_tim_ie
*tim
;
4441 tim
= (void *)(tim_ie
+ 2);
4442 ifmgd
->dtim_period
= tim
->dtim_period
;
4443 dtim_count
= tim
->dtim_count
;
4445 ifmgd
->have_beacon
= true;
4446 assoc_data
->timeout
= jiffies
;
4447 assoc_data
->timeout_started
= true;
4449 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
4450 sdata
->vif
.bss_conf
.sync_tsf
= beacon_ies
->tsf
;
4451 sdata
->vif
.bss_conf
.sync_device_ts
=
4452 bss
->device_ts_beacon
;
4453 sdata
->vif
.bss_conf
.sync_dtim_count
= dtim_count
;
4456 assoc_data
->timeout
= jiffies
;
4457 assoc_data
->timeout_started
= true;
4461 run_again(sdata
, assoc_data
->timeout
);
4463 if (bss
->corrupt_data
) {
4464 char *corrupt_type
= "data";
4465 if (bss
->corrupt_data
& IEEE80211_BSS_CORRUPT_BEACON
) {
4466 if (bss
->corrupt_data
&
4467 IEEE80211_BSS_CORRUPT_PROBE_RESP
)
4468 corrupt_type
= "beacon and probe response";
4470 corrupt_type
= "beacon";
4471 } else if (bss
->corrupt_data
& IEEE80211_BSS_CORRUPT_PROBE_RESP
)
4472 corrupt_type
= "probe response";
4473 sdata_info(sdata
, "associating with AP with corrupt %s\n",
4479 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
4480 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
4481 ifmgd
->assoc_data
= NULL
;
4487 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data
*sdata
,
4488 struct cfg80211_deauth_request
*req
)
4490 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4491 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4492 bool tx
= !req
->local_state_change
;
4494 if (ifmgd
->auth_data
&&
4495 ether_addr_equal(ifmgd
->auth_data
->bss
->bssid
, req
->bssid
)) {
4497 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4498 req
->bssid
, req
->reason_code
,
4499 ieee80211_get_reason_code_string(req
->reason_code
));
4501 drv_mgd_prepare_tx(sdata
->local
, sdata
);
4502 ieee80211_send_deauth_disassoc(sdata
, req
->bssid
,
4503 IEEE80211_STYPE_DEAUTH
,
4504 req
->reason_code
, tx
,
4506 ieee80211_destroy_auth_data(sdata
, false);
4507 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4508 IEEE80211_DEAUTH_FRAME_LEN
);
4513 if (ifmgd
->associated
&&
4514 ether_addr_equal(ifmgd
->associated
->bssid
, req
->bssid
)) {
4516 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4517 req
->bssid
, req
->reason_code
,
4518 ieee80211_get_reason_code_string(req
->reason_code
));
4520 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4521 req
->reason_code
, tx
, frame_buf
);
4522 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4523 IEEE80211_DEAUTH_FRAME_LEN
);
4530 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data
*sdata
,
4531 struct cfg80211_disassoc_request
*req
)
4533 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4535 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4538 * cfg80211 should catch this ... but it's racy since
4539 * we can receive a disassoc frame, process it, hand it
4540 * to cfg80211 while that's in a locked section already
4541 * trying to tell us that the user wants to disconnect.
4543 if (ifmgd
->associated
!= req
->bss
)
4547 "disassociating from %pM by local choice (Reason: %u=%s)\n",
4548 req
->bss
->bssid
, req
->reason_code
, ieee80211_get_reason_code_string(req
->reason_code
));
4550 memcpy(bssid
, req
->bss
->bssid
, ETH_ALEN
);
4551 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DISASSOC
,
4552 req
->reason_code
, !req
->local_state_change
,
4555 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4556 IEEE80211_DEAUTH_FRAME_LEN
);
4561 void ieee80211_mgd_stop(struct ieee80211_sub_if_data
*sdata
)
4563 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4566 * Make sure some work items will not run after this,
4567 * they will not do anything but might not have been
4568 * cancelled when disconnecting.
4570 cancel_work_sync(&ifmgd
->monitor_work
);
4571 cancel_work_sync(&ifmgd
->beacon_connection_loss_work
);
4572 cancel_work_sync(&ifmgd
->request_smps_work
);
4573 cancel_work_sync(&ifmgd
->csa_connection_drop_work
);
4574 cancel_work_sync(&ifmgd
->chswitch_work
);
4575 cancel_delayed_work_sync(&ifmgd
->tdls_peer_del_work
);
4578 if (ifmgd
->assoc_data
) {
4579 struct cfg80211_bss
*bss
= ifmgd
->assoc_data
->bss
;
4580 ieee80211_destroy_assoc_data(sdata
, false);
4581 cfg80211_assoc_timeout(sdata
->dev
, bss
);
4583 if (ifmgd
->auth_data
)
4584 ieee80211_destroy_auth_data(sdata
, false);
4585 del_timer_sync(&ifmgd
->timer
);
4586 sdata_unlock(sdata
);
4589 void ieee80211_cqm_rssi_notify(struct ieee80211_vif
*vif
,
4590 enum nl80211_cqm_rssi_threshold_event rssi_event
,
4593 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
4595 trace_api_cqm_rssi_notify(sdata
, rssi_event
);
4597 cfg80211_cqm_rssi_notify(sdata
->dev
, rssi_event
, gfp
);
4599 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify
);