perf bench futex: Cache align the worker struct
[linux/fpc-iii.git] / drivers / block / paride / pd.c
blob78a39f736c64f7edb6eb5d721e391d9e25f4a113
1 /*
2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
18 drive2
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
21 Where,
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
35 (0 if not given)
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
39 (-1 if not given)
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
61 first drive found.
64 major You may use this parameter to overide the
65 default major number (45) that this driver
66 will use. Be sure to change the device
67 name as well.
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
72 (default "pd")
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
78 (default 64)
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
84 output. (default 0)
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
93 pd.drive0
94 pd.drive1
95 pd.drive2
96 pd.drive3
97 pd.cluster
98 pd.nice
100 In addition, you can use the parameter pd.disable to disable
101 the driver entirely.
105 /* Changes:
107 1.01 GRG 1997.01.24 Restored pd_reset()
108 Added eject ioctl
109 1.02 GRG 1998.05.06 SMP spinlock changes,
110 Added slave support
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
117 #define PD_VERSION "1.05"
118 #define PD_MAJOR 45
119 #define PD_NAME "pd"
120 #define PD_UNITS 4
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
124 by default.
127 #include <linux/types.h>
129 static int verbose = 0;
130 static int major = PD_MAJOR;
131 static char *name = PD_NAME;
132 static int cluster = 64;
133 static int nice = 0;
134 static int disable = 0;
136 static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
139 static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
141 static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
143 enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
145 /* end of parameters */
147 #include <linux/init.h>
148 #include <linux/module.h>
149 #include <linux/gfp.h>
150 #include <linux/fs.h>
151 #include <linux/delay.h>
152 #include <linux/hdreg.h>
153 #include <linux/cdrom.h> /* for the eject ioctl */
154 #include <linux/blkdev.h>
155 #include <linux/blkpg.h>
156 #include <linux/kernel.h>
157 #include <linux/mutex.h>
158 #include <asm/uaccess.h>
159 #include <linux/workqueue.h>
161 static DEFINE_MUTEX(pd_mutex);
162 static DEFINE_SPINLOCK(pd_lock);
164 module_param(verbose, int, 0);
165 module_param(major, int, 0);
166 module_param(name, charp, 0);
167 module_param(cluster, int, 0);
168 module_param(nice, int, 0);
169 module_param_array(drive0, int, NULL, 0);
170 module_param_array(drive1, int, NULL, 0);
171 module_param_array(drive2, int, NULL, 0);
172 module_param_array(drive3, int, NULL, 0);
174 #include "paride.h"
176 #define PD_BITS 4
178 /* numbers for "SCSI" geometry */
180 #define PD_LOG_HEADS 64
181 #define PD_LOG_SECTS 32
183 #define PD_ID_OFF 54
184 #define PD_ID_LEN 14
186 #define PD_MAX_RETRIES 5
187 #define PD_TMO 800 /* interrupt timeout in jiffies */
188 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
190 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
192 #define STAT_ERR 0x00001
193 #define STAT_INDEX 0x00002
194 #define STAT_ECC 0x00004
195 #define STAT_DRQ 0x00008
196 #define STAT_SEEK 0x00010
197 #define STAT_WRERR 0x00020
198 #define STAT_READY 0x00040
199 #define STAT_BUSY 0x00080
201 #define ERR_AMNF 0x00100
202 #define ERR_TK0NF 0x00200
203 #define ERR_ABRT 0x00400
204 #define ERR_MCR 0x00800
205 #define ERR_IDNF 0x01000
206 #define ERR_MC 0x02000
207 #define ERR_UNC 0x04000
208 #define ERR_TMO 0x10000
210 #define IDE_READ 0x20
211 #define IDE_WRITE 0x30
212 #define IDE_READ_VRFY 0x40
213 #define IDE_INIT_DEV_PARMS 0x91
214 #define IDE_STANDBY 0x96
215 #define IDE_ACKCHANGE 0xdb
216 #define IDE_DOORLOCK 0xde
217 #define IDE_DOORUNLOCK 0xdf
218 #define IDE_IDENTIFY 0xec
219 #define IDE_EJECT 0xed
221 #define PD_NAMELEN 8
223 struct pd_unit {
224 struct pi_adapter pia; /* interface to paride layer */
225 struct pi_adapter *pi;
226 int access; /* count of active opens ... */
227 int capacity; /* Size of this volume in sectors */
228 int heads; /* physical geometry */
229 int sectors;
230 int cylinders;
231 int can_lba;
232 int drive; /* master=0 slave=1 */
233 int changed; /* Have we seen a disk change ? */
234 int removable; /* removable media device ? */
235 int standby;
236 int alt_geom;
237 char name[PD_NAMELEN]; /* pda, pdb, etc ... */
238 struct gendisk *gd;
241 static struct pd_unit pd[PD_UNITS];
243 static char pd_scratch[512]; /* scratch block buffer */
245 static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
246 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
247 "IDNF", "MC", "UNC", "???", "TMO"
250 static void *par_drv; /* reference of parport driver */
252 static inline int status_reg(struct pd_unit *disk)
254 return pi_read_regr(disk->pi, 1, 6);
257 static inline int read_reg(struct pd_unit *disk, int reg)
259 return pi_read_regr(disk->pi, 0, reg);
262 static inline void write_status(struct pd_unit *disk, int val)
264 pi_write_regr(disk->pi, 1, 6, val);
267 static inline void write_reg(struct pd_unit *disk, int reg, int val)
269 pi_write_regr(disk->pi, 0, reg, val);
272 static inline u8 DRIVE(struct pd_unit *disk)
274 return 0xa0+0x10*disk->drive;
277 /* ide command interface */
279 static void pd_print_error(struct pd_unit *disk, char *msg, int status)
281 int i;
283 printk("%s: %s: status = 0x%x =", disk->name, msg, status);
284 for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
285 if (status & (1 << i))
286 printk(" %s", pd_errs[i]);
287 printk("\n");
290 static void pd_reset(struct pd_unit *disk)
291 { /* called only for MASTER drive */
292 write_status(disk, 4);
293 udelay(50);
294 write_status(disk, 0);
295 udelay(250);
298 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
300 static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
301 { /* polled wait */
302 int k, r, e;
304 k = 0;
305 while (k < PD_SPIN) {
306 r = status_reg(disk);
307 k++;
308 if (((r & w) == w) && !(r & STAT_BUSY))
309 break;
310 udelay(PD_SPIN_DEL);
312 e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
313 if (k >= PD_SPIN)
314 e |= ERR_TMO;
315 if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
316 pd_print_error(disk, msg, e);
317 return e;
320 static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
322 write_reg(disk, 6, DRIVE(disk) + h);
323 write_reg(disk, 1, 0); /* the IDE task file */
324 write_reg(disk, 2, n);
325 write_reg(disk, 3, s);
326 write_reg(disk, 4, c0);
327 write_reg(disk, 5, c1);
328 write_reg(disk, 7, func);
330 udelay(1);
333 static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
335 int c1, c0, h, s;
337 if (disk->can_lba) {
338 s = block & 255;
339 c0 = (block >>= 8) & 255;
340 c1 = (block >>= 8) & 255;
341 h = ((block >>= 8) & 15) + 0x40;
342 } else {
343 s = (block % disk->sectors) + 1;
344 h = (block /= disk->sectors) % disk->heads;
345 c0 = (block /= disk->heads) % 256;
346 c1 = (block >>= 8);
348 pd_send_command(disk, count, s, h, c0, c1, func);
351 /* The i/o request engine */
353 enum action {Fail = 0, Ok = 1, Hold, Wait};
355 static struct request *pd_req; /* current request */
356 static enum action (*phase)(void);
358 static void run_fsm(void);
360 static void ps_tq_int(struct work_struct *work);
362 static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
364 static void schedule_fsm(void)
366 if (!nice)
367 schedule_delayed_work(&fsm_tq, 0);
368 else
369 schedule_delayed_work(&fsm_tq, nice-1);
372 static void ps_tq_int(struct work_struct *work)
374 run_fsm();
377 static enum action do_pd_io_start(void);
378 static enum action pd_special(void);
379 static enum action do_pd_read_start(void);
380 static enum action do_pd_write_start(void);
381 static enum action do_pd_read_drq(void);
382 static enum action do_pd_write_done(void);
384 static struct request_queue *pd_queue;
385 static int pd_claimed;
387 static struct pd_unit *pd_current; /* current request's drive */
388 static PIA *pi_current; /* current request's PIA */
390 static void run_fsm(void)
392 while (1) {
393 enum action res;
394 unsigned long saved_flags;
395 int stop = 0;
397 if (!phase) {
398 pd_current = pd_req->rq_disk->private_data;
399 pi_current = pd_current->pi;
400 phase = do_pd_io_start;
403 switch (pd_claimed) {
404 case 0:
405 pd_claimed = 1;
406 if (!pi_schedule_claimed(pi_current, run_fsm))
407 return;
408 case 1:
409 pd_claimed = 2;
410 pi_current->proto->connect(pi_current);
413 switch(res = phase()) {
414 case Ok: case Fail:
415 pi_disconnect(pi_current);
416 pd_claimed = 0;
417 phase = NULL;
418 spin_lock_irqsave(&pd_lock, saved_flags);
419 if (!__blk_end_request_cur(pd_req,
420 res == Ok ? 0 : -EIO)) {
421 pd_req = blk_fetch_request(pd_queue);
422 if (!pd_req)
423 stop = 1;
425 spin_unlock_irqrestore(&pd_lock, saved_flags);
426 if (stop)
427 return;
428 case Hold:
429 schedule_fsm();
430 return;
431 case Wait:
432 pi_disconnect(pi_current);
433 pd_claimed = 0;
438 static int pd_retries = 0; /* i/o error retry count */
439 static int pd_block; /* address of next requested block */
440 static int pd_count; /* number of blocks still to do */
441 static int pd_run; /* sectors in current cluster */
442 static int pd_cmd; /* current command READ/WRITE */
443 static char *pd_buf; /* buffer for request in progress */
445 static enum action do_pd_io_start(void)
447 if (pd_req->cmd_type == REQ_TYPE_DRV_PRIV) {
448 phase = pd_special;
449 return pd_special();
452 pd_cmd = rq_data_dir(pd_req);
453 if (pd_cmd == READ || pd_cmd == WRITE) {
454 pd_block = blk_rq_pos(pd_req);
455 pd_count = blk_rq_cur_sectors(pd_req);
456 if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
457 return Fail;
458 pd_run = blk_rq_sectors(pd_req);
459 pd_buf = bio_data(pd_req->bio);
460 pd_retries = 0;
461 if (pd_cmd == READ)
462 return do_pd_read_start();
463 else
464 return do_pd_write_start();
466 return Fail;
469 static enum action pd_special(void)
471 enum action (*func)(struct pd_unit *) = pd_req->special;
472 return func(pd_current);
475 static int pd_next_buf(void)
477 unsigned long saved_flags;
479 pd_count--;
480 pd_run--;
481 pd_buf += 512;
482 pd_block++;
483 if (!pd_run)
484 return 1;
485 if (pd_count)
486 return 0;
487 spin_lock_irqsave(&pd_lock, saved_flags);
488 __blk_end_request_cur(pd_req, 0);
489 pd_count = blk_rq_cur_sectors(pd_req);
490 pd_buf = bio_data(pd_req->bio);
491 spin_unlock_irqrestore(&pd_lock, saved_flags);
492 return 0;
495 static unsigned long pd_timeout;
497 static enum action do_pd_read_start(void)
499 if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
500 if (pd_retries < PD_MAX_RETRIES) {
501 pd_retries++;
502 return Wait;
504 return Fail;
506 pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
507 phase = do_pd_read_drq;
508 pd_timeout = jiffies + PD_TMO;
509 return Hold;
512 static enum action do_pd_write_start(void)
514 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
515 if (pd_retries < PD_MAX_RETRIES) {
516 pd_retries++;
517 return Wait;
519 return Fail;
521 pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
522 while (1) {
523 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
524 if (pd_retries < PD_MAX_RETRIES) {
525 pd_retries++;
526 return Wait;
528 return Fail;
530 pi_write_block(pd_current->pi, pd_buf, 512);
531 if (pd_next_buf())
532 break;
534 phase = do_pd_write_done;
535 pd_timeout = jiffies + PD_TMO;
536 return Hold;
539 static inline int pd_ready(void)
541 return !(status_reg(pd_current) & STAT_BUSY);
544 static enum action do_pd_read_drq(void)
546 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
547 return Hold;
549 while (1) {
550 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
551 if (pd_retries < PD_MAX_RETRIES) {
552 pd_retries++;
553 phase = do_pd_read_start;
554 return Wait;
556 return Fail;
558 pi_read_block(pd_current->pi, pd_buf, 512);
559 if (pd_next_buf())
560 break;
562 return Ok;
565 static enum action do_pd_write_done(void)
567 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
568 return Hold;
570 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
571 if (pd_retries < PD_MAX_RETRIES) {
572 pd_retries++;
573 phase = do_pd_write_start;
574 return Wait;
576 return Fail;
578 return Ok;
581 /* special io requests */
583 /* According to the ATA standard, the default CHS geometry should be
584 available following a reset. Some Western Digital drives come up
585 in a mode where only LBA addresses are accepted until the device
586 parameters are initialised.
589 static void pd_init_dev_parms(struct pd_unit *disk)
591 pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
592 pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
593 IDE_INIT_DEV_PARMS);
594 udelay(300);
595 pd_wait_for(disk, 0, "Initialise device parameters");
598 static enum action pd_door_lock(struct pd_unit *disk)
600 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
601 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
602 pd_wait_for(disk, STAT_READY, "Lock done");
604 return Ok;
607 static enum action pd_door_unlock(struct pd_unit *disk)
609 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
610 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
611 pd_wait_for(disk, STAT_READY, "Lock done");
613 return Ok;
616 static enum action pd_eject(struct pd_unit *disk)
618 pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
619 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
620 pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
621 pd_wait_for(disk, 0, DBMSG("before eject"));
622 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
623 pd_wait_for(disk, 0, DBMSG("after eject"));
624 return Ok;
627 static enum action pd_media_check(struct pd_unit *disk)
629 int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
630 if (!(r & STAT_ERR)) {
631 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
632 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
633 } else
634 disk->changed = 1; /* say changed if other error */
635 if (r & ERR_MC) {
636 disk->changed = 1;
637 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
638 pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
639 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
640 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
642 return Ok;
645 static void pd_standby_off(struct pd_unit *disk)
647 pd_wait_for(disk, 0, DBMSG("before STANDBY"));
648 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
649 pd_wait_for(disk, 0, DBMSG("after STANDBY"));
652 static enum action pd_identify(struct pd_unit *disk)
654 int j;
655 char id[PD_ID_LEN + 1];
657 /* WARNING: here there may be dragons. reset() applies to both drives,
658 but we call it only on probing the MASTER. This should allow most
659 common configurations to work, but be warned that a reset can clear
660 settings on the SLAVE drive.
663 if (disk->drive == 0)
664 pd_reset(disk);
666 write_reg(disk, 6, DRIVE(disk));
667 pd_wait_for(disk, 0, DBMSG("before IDENT"));
668 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
670 if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
671 return Fail;
672 pi_read_block(disk->pi, pd_scratch, 512);
673 disk->can_lba = pd_scratch[99] & 2;
674 disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
675 disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
676 disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
677 if (disk->can_lba)
678 disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
679 else
680 disk->capacity = disk->sectors * disk->heads * disk->cylinders;
682 for (j = 0; j < PD_ID_LEN; j++)
683 id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
684 j = PD_ID_LEN - 1;
685 while ((j >= 0) && (id[j] <= 0x20))
686 j--;
687 j++;
688 id[j] = 0;
690 disk->removable = pd_scratch[0] & 0x80;
692 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
693 disk->name, id,
694 disk->drive ? "slave" : "master",
695 disk->capacity, disk->capacity / 2048,
696 disk->cylinders, disk->heads, disk->sectors,
697 disk->removable ? "removable" : "fixed");
699 if (disk->capacity)
700 pd_init_dev_parms(disk);
701 if (!disk->standby)
702 pd_standby_off(disk);
704 return Ok;
707 /* end of io request engine */
709 static void do_pd_request(struct request_queue * q)
711 if (pd_req)
712 return;
713 pd_req = blk_fetch_request(q);
714 if (!pd_req)
715 return;
717 schedule_fsm();
720 static int pd_special_command(struct pd_unit *disk,
721 enum action (*func)(struct pd_unit *disk))
723 struct request *rq;
724 int err = 0;
726 rq = blk_get_request(disk->gd->queue, READ, __GFP_RECLAIM);
727 if (IS_ERR(rq))
728 return PTR_ERR(rq);
730 rq->cmd_type = REQ_TYPE_DRV_PRIV;
731 rq->special = func;
733 err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
735 blk_put_request(rq);
736 return err;
739 /* kernel glue structures */
741 static int pd_open(struct block_device *bdev, fmode_t mode)
743 struct pd_unit *disk = bdev->bd_disk->private_data;
745 mutex_lock(&pd_mutex);
746 disk->access++;
748 if (disk->removable) {
749 pd_special_command(disk, pd_media_check);
750 pd_special_command(disk, pd_door_lock);
752 mutex_unlock(&pd_mutex);
753 return 0;
756 static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
758 struct pd_unit *disk = bdev->bd_disk->private_data;
760 if (disk->alt_geom) {
761 geo->heads = PD_LOG_HEADS;
762 geo->sectors = PD_LOG_SECTS;
763 geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
764 } else {
765 geo->heads = disk->heads;
766 geo->sectors = disk->sectors;
767 geo->cylinders = disk->cylinders;
770 return 0;
773 static int pd_ioctl(struct block_device *bdev, fmode_t mode,
774 unsigned int cmd, unsigned long arg)
776 struct pd_unit *disk = bdev->bd_disk->private_data;
778 switch (cmd) {
779 case CDROMEJECT:
780 mutex_lock(&pd_mutex);
781 if (disk->access == 1)
782 pd_special_command(disk, pd_eject);
783 mutex_unlock(&pd_mutex);
784 return 0;
785 default:
786 return -EINVAL;
790 static void pd_release(struct gendisk *p, fmode_t mode)
792 struct pd_unit *disk = p->private_data;
794 mutex_lock(&pd_mutex);
795 if (!--disk->access && disk->removable)
796 pd_special_command(disk, pd_door_unlock);
797 mutex_unlock(&pd_mutex);
800 static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
802 struct pd_unit *disk = p->private_data;
803 int r;
804 if (!disk->removable)
805 return 0;
806 pd_special_command(disk, pd_media_check);
807 r = disk->changed;
808 disk->changed = 0;
809 return r ? DISK_EVENT_MEDIA_CHANGE : 0;
812 static int pd_revalidate(struct gendisk *p)
814 struct pd_unit *disk = p->private_data;
815 if (pd_special_command(disk, pd_identify) == 0)
816 set_capacity(p, disk->capacity);
817 else
818 set_capacity(p, 0);
819 return 0;
822 static const struct block_device_operations pd_fops = {
823 .owner = THIS_MODULE,
824 .open = pd_open,
825 .release = pd_release,
826 .ioctl = pd_ioctl,
827 .getgeo = pd_getgeo,
828 .check_events = pd_check_events,
829 .revalidate_disk= pd_revalidate
832 /* probing */
834 static void pd_probe_drive(struct pd_unit *disk)
836 struct gendisk *p = alloc_disk(1 << PD_BITS);
837 if (!p)
838 return;
839 strcpy(p->disk_name, disk->name);
840 p->fops = &pd_fops;
841 p->major = major;
842 p->first_minor = (disk - pd) << PD_BITS;
843 disk->gd = p;
844 p->private_data = disk;
845 p->queue = pd_queue;
847 if (disk->drive == -1) {
848 for (disk->drive = 0; disk->drive <= 1; disk->drive++)
849 if (pd_special_command(disk, pd_identify) == 0)
850 return;
851 } else if (pd_special_command(disk, pd_identify) == 0)
852 return;
853 disk->gd = NULL;
854 put_disk(p);
857 static int pd_detect(void)
859 int found = 0, unit, pd_drive_count = 0;
860 struct pd_unit *disk;
862 for (unit = 0; unit < PD_UNITS; unit++) {
863 int *parm = *drives[unit];
864 struct pd_unit *disk = pd + unit;
865 disk->pi = &disk->pia;
866 disk->access = 0;
867 disk->changed = 1;
868 disk->capacity = 0;
869 disk->drive = parm[D_SLV];
870 snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
871 disk->alt_geom = parm[D_GEO];
872 disk->standby = parm[D_SBY];
873 if (parm[D_PRT])
874 pd_drive_count++;
877 par_drv = pi_register_driver(name);
878 if (!par_drv) {
879 pr_err("failed to register %s driver\n", name);
880 return -1;
883 if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
884 disk = pd;
885 if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
886 PI_PD, verbose, disk->name)) {
887 pd_probe_drive(disk);
888 if (!disk->gd)
889 pi_release(disk->pi);
892 } else {
893 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
894 int *parm = *drives[unit];
895 if (!parm[D_PRT])
896 continue;
897 if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
898 parm[D_UNI], parm[D_PRO], parm[D_DLY],
899 pd_scratch, PI_PD, verbose, disk->name)) {
900 pd_probe_drive(disk);
901 if (!disk->gd)
902 pi_release(disk->pi);
906 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
907 if (disk->gd) {
908 set_capacity(disk->gd, disk->capacity);
909 add_disk(disk->gd);
910 found = 1;
913 if (!found) {
914 printk("%s: no valid drive found\n", name);
915 pi_unregister_driver(par_drv);
917 return found;
920 static int __init pd_init(void)
922 if (disable)
923 goto out1;
925 pd_queue = blk_init_queue(do_pd_request, &pd_lock);
926 if (!pd_queue)
927 goto out1;
929 blk_queue_max_hw_sectors(pd_queue, cluster);
931 if (register_blkdev(major, name))
932 goto out2;
934 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
935 name, name, PD_VERSION, major, cluster, nice);
936 if (!pd_detect())
937 goto out3;
939 return 0;
941 out3:
942 unregister_blkdev(major, name);
943 out2:
944 blk_cleanup_queue(pd_queue);
945 out1:
946 return -ENODEV;
949 static void __exit pd_exit(void)
951 struct pd_unit *disk;
952 int unit;
953 unregister_blkdev(major, name);
954 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
955 struct gendisk *p = disk->gd;
956 if (p) {
957 disk->gd = NULL;
958 del_gendisk(p);
959 put_disk(p);
960 pi_release(disk->pi);
963 blk_cleanup_queue(pd_queue);
966 MODULE_LICENSE("GPL");
967 module_init(pd_init)
968 module_exit(pd_exit)