2 * AD5421 Digital to analog converters driver
4 * Copyright 2011 Analog Devices Inc.
6 * Licensed under the GPL-2.
9 #include <linux/device.h>
10 #include <linux/delay.h>
11 #include <linux/err.h>
12 #include <linux/module.h>
13 #include <linux/interrupt.h>
14 #include <linux/kernel.h>
15 #include <linux/spi/spi.h>
16 #include <linux/slab.h>
17 #include <linux/sysfs.h>
19 #include <linux/iio/iio.h>
20 #include <linux/iio/sysfs.h>
21 #include <linux/iio/events.h>
22 #include <linux/iio/dac/ad5421.h>
25 #define AD5421_REG_DAC_DATA 0x1
26 #define AD5421_REG_CTRL 0x2
27 #define AD5421_REG_OFFSET 0x3
28 #define AD5421_REG_GAIN 0x4
29 /* load dac and fault shared the same register number. Writing to it will cause
30 * a dac load command, reading from it will return the fault status register */
31 #define AD5421_REG_LOAD_DAC 0x5
32 #define AD5421_REG_FAULT 0x5
33 #define AD5421_REG_FORCE_ALARM_CURRENT 0x6
34 #define AD5421_REG_RESET 0x7
35 #define AD5421_REG_START_CONVERSION 0x8
36 #define AD5421_REG_NOOP 0x9
38 #define AD5421_CTRL_WATCHDOG_DISABLE BIT(12)
39 #define AD5421_CTRL_AUTO_FAULT_READBACK BIT(11)
40 #define AD5421_CTRL_MIN_CURRENT BIT(9)
41 #define AD5421_CTRL_ADC_SOURCE_TEMP BIT(8)
42 #define AD5421_CTRL_ADC_ENABLE BIT(7)
43 #define AD5421_CTRL_PWR_DOWN_INT_VREF BIT(6)
45 #define AD5421_FAULT_SPI BIT(15)
46 #define AD5421_FAULT_PEC BIT(14)
47 #define AD5421_FAULT_OVER_CURRENT BIT(13)
48 #define AD5421_FAULT_UNDER_CURRENT BIT(12)
49 #define AD5421_FAULT_TEMP_OVER_140 BIT(11)
50 #define AD5421_FAULT_TEMP_OVER_100 BIT(10)
51 #define AD5421_FAULT_UNDER_VOLTAGE_6V BIT(9)
52 #define AD5421_FAULT_UNDER_VOLTAGE_12V BIT(8)
54 /* These bits will cause the fault pin to go high */
55 #define AD5421_FAULT_TRIGGER_IRQ \
56 (AD5421_FAULT_SPI | AD5421_FAULT_PEC | AD5421_FAULT_OVER_CURRENT | \
57 AD5421_FAULT_UNDER_CURRENT | AD5421_FAULT_TEMP_OVER_140)
60 * struct ad5421_state - driver instance specific data
62 * @ctrl: control register cache
63 * @current_range: current range which the device is configured for
64 * @data: spi transfer buffers
65 * @fault_mask: software masking of events
68 struct spi_device
*spi
;
70 enum ad5421_current_range current_range
;
71 unsigned int fault_mask
;
74 * DMA (thus cache coherency maintenance) requires the
75 * transfer buffers to live in their own cache lines.
80 } data
[2] ____cacheline_aligned
;
83 static const struct iio_event_spec ad5421_current_event
[] = {
85 .type
= IIO_EV_TYPE_THRESH
,
86 .dir
= IIO_EV_DIR_RISING
,
87 .mask_separate
= BIT(IIO_EV_INFO_VALUE
) |
88 BIT(IIO_EV_INFO_ENABLE
),
90 .type
= IIO_EV_TYPE_THRESH
,
91 .dir
= IIO_EV_DIR_FALLING
,
92 .mask_separate
= BIT(IIO_EV_INFO_VALUE
) |
93 BIT(IIO_EV_INFO_ENABLE
),
97 static const struct iio_event_spec ad5421_temp_event
[] = {
99 .type
= IIO_EV_TYPE_THRESH
,
100 .dir
= IIO_EV_DIR_RISING
,
101 .mask_separate
= BIT(IIO_EV_INFO_VALUE
) |
102 BIT(IIO_EV_INFO_ENABLE
),
106 static const struct iio_chan_spec ad5421_channels
[] = {
112 .info_mask_separate
= BIT(IIO_CHAN_INFO_RAW
) |
113 BIT(IIO_CHAN_INFO_CALIBSCALE
) |
114 BIT(IIO_CHAN_INFO_CALIBBIAS
),
115 .info_mask_shared_by_type
= BIT(IIO_CHAN_INFO_SCALE
) |
116 BIT(IIO_CHAN_INFO_OFFSET
),
122 .event_spec
= ad5421_current_event
,
123 .num_event_specs
= ARRAY_SIZE(ad5421_current_event
),
128 .event_spec
= ad5421_temp_event
,
129 .num_event_specs
= ARRAY_SIZE(ad5421_temp_event
),
133 static int ad5421_write_unlocked(struct iio_dev
*indio_dev
,
134 unsigned int reg
, unsigned int val
)
136 struct ad5421_state
*st
= iio_priv(indio_dev
);
138 st
->data
[0].d32
= cpu_to_be32((reg
<< 16) | val
);
140 return spi_write(st
->spi
, &st
->data
[0].d8
[1], 3);
143 static int ad5421_write(struct iio_dev
*indio_dev
, unsigned int reg
,
148 mutex_lock(&indio_dev
->mlock
);
149 ret
= ad5421_write_unlocked(indio_dev
, reg
, val
);
150 mutex_unlock(&indio_dev
->mlock
);
155 static int ad5421_read(struct iio_dev
*indio_dev
, unsigned int reg
)
157 struct ad5421_state
*st
= iio_priv(indio_dev
);
159 struct spi_transfer t
[] = {
161 .tx_buf
= &st
->data
[0].d8
[1],
165 .rx_buf
= &st
->data
[1].d8
[1],
170 mutex_lock(&indio_dev
->mlock
);
172 st
->data
[0].d32
= cpu_to_be32((1 << 23) | (reg
<< 16));
174 ret
= spi_sync_transfer(st
->spi
, t
, ARRAY_SIZE(t
));
176 ret
= be32_to_cpu(st
->data
[1].d32
) & 0xffff;
178 mutex_unlock(&indio_dev
->mlock
);
183 static int ad5421_update_ctrl(struct iio_dev
*indio_dev
, unsigned int set
,
186 struct ad5421_state
*st
= iio_priv(indio_dev
);
189 mutex_lock(&indio_dev
->mlock
);
194 ret
= ad5421_write_unlocked(indio_dev
, AD5421_REG_CTRL
, st
->ctrl
);
196 mutex_unlock(&indio_dev
->mlock
);
201 static irqreturn_t
ad5421_fault_handler(int irq
, void *data
)
203 struct iio_dev
*indio_dev
= data
;
204 struct ad5421_state
*st
= iio_priv(indio_dev
);
206 unsigned int old_fault
= 0;
209 fault
= ad5421_read(indio_dev
, AD5421_REG_FAULT
);
213 /* If we had a fault, this might mean that the DAC has lost its state
214 * and has been reset. Make sure that the control register actually
215 * contains what we expect it to contain. Otherwise the watchdog might
216 * be enabled and we get watchdog timeout faults, which will render the
218 ad5421_update_ctrl(indio_dev
, 0, 0);
221 /* The fault pin stays high as long as a fault condition is present and
222 * it is not possible to mask fault conditions. For certain fault
223 * conditions for example like over-temperature it takes some time
224 * until the fault condition disappears. If we would exit the interrupt
225 * handler immediately after handling the event it would be entered
226 * again instantly. Thus we fall back to polling in case we detect that
227 * a interrupt condition is still present.
230 /* 0xffff is a invalid value for the register and will only be
231 * read if there has been a communication error */
235 /* we are only interested in new events */
236 events
= (old_fault
^ fault
) & fault
;
237 events
&= st
->fault_mask
;
239 if (events
& AD5421_FAULT_OVER_CURRENT
) {
240 iio_push_event(indio_dev
,
241 IIO_UNMOD_EVENT_CODE(IIO_CURRENT
,
245 iio_get_time_ns(indio_dev
));
248 if (events
& AD5421_FAULT_UNDER_CURRENT
) {
249 iio_push_event(indio_dev
,
250 IIO_UNMOD_EVENT_CODE(IIO_CURRENT
,
254 iio_get_time_ns(indio_dev
));
257 if (events
& AD5421_FAULT_TEMP_OVER_140
) {
258 iio_push_event(indio_dev
,
259 IIO_UNMOD_EVENT_CODE(IIO_TEMP
,
263 iio_get_time_ns(indio_dev
));
267 fault
= ad5421_read(indio_dev
, AD5421_REG_FAULT
);
269 /* still active? go to sleep for some time */
270 if (fault
& AD5421_FAULT_TRIGGER_IRQ
)
273 } while (fault
& AD5421_FAULT_TRIGGER_IRQ
);
279 static void ad5421_get_current_min_max(struct ad5421_state
*st
,
280 unsigned int *min
, unsigned int *max
)
282 /* The current range is configured using external pins, which are
283 * usually hard-wired and not run-time switchable. */
284 switch (st
->current_range
) {
285 case AD5421_CURRENT_RANGE_4mA_20mA
:
289 case AD5421_CURRENT_RANGE_3mA8_21mA
:
293 case AD5421_CURRENT_RANGE_3mA2_24mA
:
304 static inline unsigned int ad5421_get_offset(struct ad5421_state
*st
)
306 unsigned int min
, max
;
308 ad5421_get_current_min_max(st
, &min
, &max
);
309 return (min
* (1 << 16)) / (max
- min
);
312 static int ad5421_read_raw(struct iio_dev
*indio_dev
,
313 struct iio_chan_spec
const *chan
, int *val
, int *val2
, long m
)
315 struct ad5421_state
*st
= iio_priv(indio_dev
);
316 unsigned int min
, max
;
319 if (chan
->type
!= IIO_CURRENT
)
323 case IIO_CHAN_INFO_RAW
:
324 ret
= ad5421_read(indio_dev
, AD5421_REG_DAC_DATA
);
329 case IIO_CHAN_INFO_SCALE
:
330 ad5421_get_current_min_max(st
, &min
, &max
);
332 *val2
= (1 << 16) * 1000;
333 return IIO_VAL_FRACTIONAL
;
334 case IIO_CHAN_INFO_OFFSET
:
335 *val
= ad5421_get_offset(st
);
337 case IIO_CHAN_INFO_CALIBBIAS
:
338 ret
= ad5421_read(indio_dev
, AD5421_REG_OFFSET
);
343 case IIO_CHAN_INFO_CALIBSCALE
:
344 ret
= ad5421_read(indio_dev
, AD5421_REG_GAIN
);
354 static int ad5421_write_raw(struct iio_dev
*indio_dev
,
355 struct iio_chan_spec
const *chan
, int val
, int val2
, long mask
)
357 const unsigned int max_val
= 1 << 16;
360 case IIO_CHAN_INFO_RAW
:
361 if (val
>= max_val
|| val
< 0)
364 return ad5421_write(indio_dev
, AD5421_REG_DAC_DATA
, val
);
365 case IIO_CHAN_INFO_CALIBBIAS
:
367 if (val
>= max_val
|| val
< 0)
370 return ad5421_write(indio_dev
, AD5421_REG_OFFSET
, val
);
371 case IIO_CHAN_INFO_CALIBSCALE
:
372 if (val
>= max_val
|| val
< 0)
375 return ad5421_write(indio_dev
, AD5421_REG_GAIN
, val
);
383 static int ad5421_write_event_config(struct iio_dev
*indio_dev
,
384 const struct iio_chan_spec
*chan
, enum iio_event_type type
,
385 enum iio_event_direction dir
, int state
)
387 struct ad5421_state
*st
= iio_priv(indio_dev
);
390 switch (chan
->type
) {
392 if (dir
== IIO_EV_DIR_RISING
)
393 mask
= AD5421_FAULT_OVER_CURRENT
;
395 mask
= AD5421_FAULT_UNDER_CURRENT
;
398 mask
= AD5421_FAULT_TEMP_OVER_140
;
404 mutex_lock(&indio_dev
->mlock
);
406 st
->fault_mask
|= mask
;
408 st
->fault_mask
&= ~mask
;
409 mutex_unlock(&indio_dev
->mlock
);
414 static int ad5421_read_event_config(struct iio_dev
*indio_dev
,
415 const struct iio_chan_spec
*chan
, enum iio_event_type type
,
416 enum iio_event_direction dir
)
418 struct ad5421_state
*st
= iio_priv(indio_dev
);
421 switch (chan
->type
) {
423 if (dir
== IIO_EV_DIR_RISING
)
424 mask
= AD5421_FAULT_OVER_CURRENT
;
426 mask
= AD5421_FAULT_UNDER_CURRENT
;
429 mask
= AD5421_FAULT_TEMP_OVER_140
;
435 return (bool)(st
->fault_mask
& mask
);
438 static int ad5421_read_event_value(struct iio_dev
*indio_dev
,
439 const struct iio_chan_spec
*chan
, enum iio_event_type type
,
440 enum iio_event_direction dir
, enum iio_event_info info
, int *val
,
445 switch (chan
->type
) {
447 ret
= ad5421_read(indio_dev
, AD5421_REG_DAC_DATA
);
462 static const struct iio_info ad5421_info
= {
463 .read_raw
= ad5421_read_raw
,
464 .write_raw
= ad5421_write_raw
,
465 .read_event_config
= ad5421_read_event_config
,
466 .write_event_config
= ad5421_write_event_config
,
467 .read_event_value
= ad5421_read_event_value
,
468 .driver_module
= THIS_MODULE
,
471 static int ad5421_probe(struct spi_device
*spi
)
473 struct ad5421_platform_data
*pdata
= dev_get_platdata(&spi
->dev
);
474 struct iio_dev
*indio_dev
;
475 struct ad5421_state
*st
;
478 indio_dev
= devm_iio_device_alloc(&spi
->dev
, sizeof(*st
));
479 if (indio_dev
== NULL
) {
480 dev_err(&spi
->dev
, "Failed to allocate iio device\n");
484 st
= iio_priv(indio_dev
);
485 spi_set_drvdata(spi
, indio_dev
);
489 indio_dev
->dev
.parent
= &spi
->dev
;
490 indio_dev
->name
= "ad5421";
491 indio_dev
->info
= &ad5421_info
;
492 indio_dev
->modes
= INDIO_DIRECT_MODE
;
493 indio_dev
->channels
= ad5421_channels
;
494 indio_dev
->num_channels
= ARRAY_SIZE(ad5421_channels
);
496 st
->ctrl
= AD5421_CTRL_WATCHDOG_DISABLE
|
497 AD5421_CTRL_AUTO_FAULT_READBACK
;
500 st
->current_range
= pdata
->current_range
;
501 if (pdata
->external_vref
)
502 st
->ctrl
|= AD5421_CTRL_PWR_DOWN_INT_VREF
;
504 st
->current_range
= AD5421_CURRENT_RANGE_4mA_20mA
;
507 /* write initial ctrl register value */
508 ad5421_update_ctrl(indio_dev
, 0, 0);
511 ret
= devm_request_threaded_irq(&spi
->dev
, spi
->irq
,
513 ad5421_fault_handler
,
514 IRQF_TRIGGER_HIGH
| IRQF_ONESHOT
,
521 return devm_iio_device_register(&spi
->dev
, indio_dev
);
524 static struct spi_driver ad5421_driver
= {
528 .probe
= ad5421_probe
,
530 module_spi_driver(ad5421_driver
);
532 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
533 MODULE_DESCRIPTION("Analog Devices AD5421 DAC");
534 MODULE_LICENSE("GPL v2");
535 MODULE_ALIAS("spi:ad5421");