?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
perf bench futex: Cache align the worker struct
[linux/fpc-iii.git] / drivers / mmc / host / sunxi-mmc.c
blobc0a5c676d0e82bd662c673c00acd385914d501e3
1 /*
2 * Driver for sunxi SD/MMC host controllers
3 * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd.
4 * (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com>
5 * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch>
6 * (C) Copyright 2013-2014 David Lanzend�rfer <david.lanzendoerfer@o2s.ch>
7 * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/io.h>
18 #include <linux/device.h>
19 #include <linux/interrupt.h>
20 #include <linux/delay.h>
21 #include <linux/err.h>
22
23 #include <linux/clk.h>
24 #include <linux/gpio.h>
25 #include <linux/platform_device.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/dma-mapping.h>
29 #include <linux/slab.h>
30 #include <linux/reset.h>
31 #include <linux/regulator/consumer.h>
32
33 #include <linux/of_address.h>
34 #include <linux/of_gpio.h>
35 #include <linux/of_platform.h>
36
37 #include <linux/mmc/host.h>
38 #include <linux/mmc/sd.h>
39 #include <linux/mmc/sdio.h>
40 #include <linux/mmc/mmc.h>
41 #include <linux/mmc/core.h>
42 #include <linux/mmc/card.h>
43 #include <linux/mmc/slot-gpio.h>
44
45 /* register offset definitions */
46 #define SDXC_REG_GCTRL (0x00) /* SMC Global Control Register */
47 #define SDXC_REG_CLKCR (0x04) /* SMC Clock Control Register */
48 #define SDXC_REG_TMOUT (0x08) /* SMC Time Out Register */
49 #define SDXC_REG_WIDTH (0x0C) /* SMC Bus Width Register */
50 #define SDXC_REG_BLKSZ (0x10) /* SMC Block Size Register */
51 #define SDXC_REG_BCNTR (0x14) /* SMC Byte Count Register */
52 #define SDXC_REG_CMDR (0x18) /* SMC Command Register */
53 #define SDXC_REG_CARG (0x1C) /* SMC Argument Register */
54 #define SDXC_REG_RESP0 (0x20) /* SMC Response Register 0 */
55 #define SDXC_REG_RESP1 (0x24) /* SMC Response Register 1 */
56 #define SDXC_REG_RESP2 (0x28) /* SMC Response Register 2 */
57 #define SDXC_REG_RESP3 (0x2C) /* SMC Response Register 3 */
58 #define SDXC_REG_IMASK (0x30) /* SMC Interrupt Mask Register */
59 #define SDXC_REG_MISTA (0x34) /* SMC Masked Interrupt Status Register */
60 #define SDXC_REG_RINTR (0x38) /* SMC Raw Interrupt Status Register */
61 #define SDXC_REG_STAS (0x3C) /* SMC Status Register */
62 #define SDXC_REG_FTRGL (0x40) /* SMC FIFO Threshold Watermark Registe */
63 #define SDXC_REG_FUNS (0x44) /* SMC Function Select Register */
64 #define SDXC_REG_CBCR (0x48) /* SMC CIU Byte Count Register */
65 #define SDXC_REG_BBCR (0x4C) /* SMC BIU Byte Count Register */
66 #define SDXC_REG_DBGC (0x50) /* SMC Debug Enable Register */
67 #define SDXC_REG_HWRST (0x78) /* SMC Card Hardware Reset for Register */
68 #define SDXC_REG_DMAC (0x80) /* SMC IDMAC Control Register */
69 #define SDXC_REG_DLBA (0x84) /* SMC IDMAC Descriptor List Base Addre */
70 #define SDXC_REG_IDST (0x88) /* SMC IDMAC Status Register */
71 #define SDXC_REG_IDIE (0x8C) /* SMC IDMAC Interrupt Enable Register */
72 #define SDXC_REG_CHDA (0x90)
73 #define SDXC_REG_CBDA (0x94)
74
75 /* New registers introduced in A64 */
76 #define SDXC_REG_A12A 0x058 /* SMC Auto Command 12 Register */
77 #define SDXC_REG_SD_NTSR 0x05C /* SMC New Timing Set Register */
78 #define SDXC_REG_DRV_DL 0x140 /* Drive Delay Control Register */
79 #define SDXC_REG_SAMP_DL_REG 0x144 /* SMC sample delay control */
80 #define SDXC_REG_DS_DL_REG 0x148 /* SMC data strobe delay control */
81
82 #define mmc_readl(host, reg) \
83 readl((host)->reg_base + SDXC_##reg)
84 #define mmc_writel(host, reg, value) \
85 writel((value), (host)->reg_base + SDXC_##reg)
86
87 /* global control register bits */
88 #define SDXC_SOFT_RESET BIT(0)
89 #define SDXC_FIFO_RESET BIT(1)
90 #define SDXC_DMA_RESET BIT(2)
91 #define SDXC_INTERRUPT_ENABLE_BIT BIT(4)
92 #define SDXC_DMA_ENABLE_BIT BIT(5)
93 #define SDXC_DEBOUNCE_ENABLE_BIT BIT(8)
94 #define SDXC_POSEDGE_LATCH_DATA BIT(9)
95 #define SDXC_DDR_MODE BIT(10)
96 #define SDXC_MEMORY_ACCESS_DONE BIT(29)
97 #define SDXC_ACCESS_DONE_DIRECT BIT(30)
98 #define SDXC_ACCESS_BY_AHB BIT(31)
99 #define SDXC_ACCESS_BY_DMA (0 << 31)
100 #define SDXC_HARDWARE_RESET \
101 (SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET)
102
103 /* clock control bits */
104 #define SDXC_CARD_CLOCK_ON BIT(16)
105 #define SDXC_LOW_POWER_ON BIT(17)
106
107 /* bus width */
108 #define SDXC_WIDTH1 0
109 #define SDXC_WIDTH4 1
110 #define SDXC_WIDTH8 2
111
112 /* smc command bits */
113 #define SDXC_RESP_EXPIRE BIT(6)
114 #define SDXC_LONG_RESPONSE BIT(7)
115 #define SDXC_CHECK_RESPONSE_CRC BIT(8)
116 #define SDXC_DATA_EXPIRE BIT(9)
117 #define SDXC_WRITE BIT(10)
118 #define SDXC_SEQUENCE_MODE BIT(11)
119 #define SDXC_SEND_AUTO_STOP BIT(12)
120 #define SDXC_WAIT_PRE_OVER BIT(13)
121 #define SDXC_STOP_ABORT_CMD BIT(14)
122 #define SDXC_SEND_INIT_SEQUENCE BIT(15)
123 #define SDXC_UPCLK_ONLY BIT(21)
124 #define SDXC_READ_CEATA_DEV BIT(22)
125 #define SDXC_CCS_EXPIRE BIT(23)
126 #define SDXC_ENABLE_BIT_BOOT BIT(24)
127 #define SDXC_ALT_BOOT_OPTIONS BIT(25)
128 #define SDXC_BOOT_ACK_EXPIRE BIT(26)
129 #define SDXC_BOOT_ABORT BIT(27)
130 #define SDXC_VOLTAGE_SWITCH BIT(28)
131 #define SDXC_USE_HOLD_REGISTER BIT(29)
132 #define SDXC_START BIT(31)
133
134 /* interrupt bits */
135 #define SDXC_RESP_ERROR BIT(1)
136 #define SDXC_COMMAND_DONE BIT(2)
137 #define SDXC_DATA_OVER BIT(3)
138 #define SDXC_TX_DATA_REQUEST BIT(4)
139 #define SDXC_RX_DATA_REQUEST BIT(5)
140 #define SDXC_RESP_CRC_ERROR BIT(6)
141 #define SDXC_DATA_CRC_ERROR BIT(7)
142 #define SDXC_RESP_TIMEOUT BIT(8)
143 #define SDXC_DATA_TIMEOUT BIT(9)
144 #define SDXC_VOLTAGE_CHANGE_DONE BIT(10)
145 #define SDXC_FIFO_RUN_ERROR BIT(11)
146 #define SDXC_HARD_WARE_LOCKED BIT(12)
147 #define SDXC_START_BIT_ERROR BIT(13)
148 #define SDXC_AUTO_COMMAND_DONE BIT(14)
149 #define SDXC_END_BIT_ERROR BIT(15)
150 #define SDXC_SDIO_INTERRUPT BIT(16)
151 #define SDXC_CARD_INSERT BIT(30)
152 #define SDXC_CARD_REMOVE BIT(31)
153 #define SDXC_INTERRUPT_ERROR_BIT \
154 (SDXC_RESP_ERROR | SDXC_RESP_CRC_ERROR | SDXC_DATA_CRC_ERROR | \
155 SDXC_RESP_TIMEOUT | SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \
156 SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | SDXC_END_BIT_ERROR)
157 #define SDXC_INTERRUPT_DONE_BIT \
158 (SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \
159 SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE)
160
161 /* status */
162 #define SDXC_RXWL_FLAG BIT(0)
163 #define SDXC_TXWL_FLAG BIT(1)
164 #define SDXC_FIFO_EMPTY BIT(2)
165 #define SDXC_FIFO_FULL BIT(3)
166 #define SDXC_CARD_PRESENT BIT(8)
167 #define SDXC_CARD_DATA_BUSY BIT(9)
168 #define SDXC_DATA_FSM_BUSY BIT(10)
169 #define SDXC_DMA_REQUEST BIT(31)
170 #define SDXC_FIFO_SIZE 16
171
172 /* Function select */
173 #define SDXC_CEATA_ON (0xceaa << 16)
174 #define SDXC_SEND_IRQ_RESPONSE BIT(0)
175 #define SDXC_SDIO_READ_WAIT BIT(1)
176 #define SDXC_ABORT_READ_DATA BIT(2)
177 #define SDXC_SEND_CCSD BIT(8)
178 #define SDXC_SEND_AUTO_STOPCCSD BIT(9)
179 #define SDXC_CEATA_DEV_IRQ_ENABLE BIT(10)
180
181 /* IDMA controller bus mod bit field */
182 #define SDXC_IDMAC_SOFT_RESET BIT(0)
183 #define SDXC_IDMAC_FIX_BURST BIT(1)
184 #define SDXC_IDMAC_IDMA_ON BIT(7)
185 #define SDXC_IDMAC_REFETCH_DES BIT(31)
186
187 /* IDMA status bit field */
188 #define SDXC_IDMAC_TRANSMIT_INTERRUPT BIT(0)
189 #define SDXC_IDMAC_RECEIVE_INTERRUPT BIT(1)
190 #define SDXC_IDMAC_FATAL_BUS_ERROR BIT(2)
191 #define SDXC_IDMAC_DESTINATION_INVALID BIT(4)
192 #define SDXC_IDMAC_CARD_ERROR_SUM BIT(5)
193 #define SDXC_IDMAC_NORMAL_INTERRUPT_SUM BIT(8)
194 #define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM BIT(9)
195 #define SDXC_IDMAC_HOST_ABORT_INTERRUPT BIT(10)
196 #define SDXC_IDMAC_IDLE (0 << 13)
197 #define SDXC_IDMAC_SUSPEND (1 << 13)
198 #define SDXC_IDMAC_DESC_READ (2 << 13)
199 #define SDXC_IDMAC_DESC_CHECK (3 << 13)
200 #define SDXC_IDMAC_READ_REQUEST_WAIT (4 << 13)
201 #define SDXC_IDMAC_WRITE_REQUEST_WAIT (5 << 13)
202 #define SDXC_IDMAC_READ (6 << 13)
203 #define SDXC_IDMAC_WRITE (7 << 13)
204 #define SDXC_IDMAC_DESC_CLOSE (8 << 13)
205
206 /*
207 * If the idma-des-size-bits of property is ie 13, bufsize bits are:
208 * Bits 0-12: buf1 size
209 * Bits 13-25: buf2 size
210 * Bits 26-31: not used
211 * Since we only ever set buf1 size, we can simply store it directly.
212 */
213 #define SDXC_IDMAC_DES0_DIC BIT(1) /* disable interrupt on completion */
214 #define SDXC_IDMAC_DES0_LD BIT(2) /* last descriptor */
215 #define SDXC_IDMAC_DES0_FD BIT(3) /* first descriptor */
216 #define SDXC_IDMAC_DES0_CH BIT(4) /* chain mode */
217 #define SDXC_IDMAC_DES0_ER BIT(5) /* end of ring */
218 #define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */
219 #define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */
220
221 #define SDXC_CLK_400K 0
222 #define SDXC_CLK_25M 1
223 #define SDXC_CLK_50M 2
224 #define SDXC_CLK_50M_DDR 3
225 #define SDXC_CLK_50M_DDR_8BIT 4
226
227 #define SDXC_2X_TIMING_MODE BIT(31)
228
229 #define SDXC_CAL_START BIT(15)
230 #define SDXC_CAL_DONE BIT(14)
231 #define SDXC_CAL_DL_SHIFT 8
232 #define SDXC_CAL_DL_SW_EN BIT(7)
233 #define SDXC_CAL_DL_SW_SHIFT 0
234 #define SDXC_CAL_DL_MASK 0x3f
235
236 #define SDXC_CAL_TIMEOUT 3 /* in seconds, 3s is enough*/
237
238 struct sunxi_mmc_clk_delay {
239 u32 output;
240 u32 sample;
241 };
242
243 struct sunxi_idma_des {
244 __le32 config;
245 __le32 buf_size;
246 __le32 buf_addr_ptr1;
247 __le32 buf_addr_ptr2;
248 };
249
250 struct sunxi_mmc_cfg {
251 u32 idma_des_size_bits;
252 const struct sunxi_mmc_clk_delay *clk_delays;
253
254 /* does the IP block support autocalibration? */
255 bool can_calibrate;
256 };
257
258 struct sunxi_mmc_host {
259 struct mmc_host *mmc;
260 struct reset_control *reset;
261 const struct sunxi_mmc_cfg *cfg;
262
263 /* IO mapping base */
264 void __iomem *reg_base;
265
266 /* clock management */
267 struct clk *clk_ahb;
268 struct clk *clk_mmc;
269 struct clk *clk_sample;
270 struct clk *clk_output;
271
272 /* irq */
273 spinlock_t lock;
274 int irq;
275 u32 int_sum;
276 u32 sdio_imask;
277
278 /* dma */
279 dma_addr_t sg_dma;
280 void *sg_cpu;
281 bool wait_dma;
282
283 struct mmc_request *mrq;
284 struct mmc_request *manual_stop_mrq;
285 int ferror;
286
287 /* vqmmc */
288 bool vqmmc_enabled;
289 };
290
291 static int sunxi_mmc_reset_host(struct sunxi_mmc_host *host)
292 {
293 unsigned long expire = jiffies + msecs_to_jiffies(250);
294 u32 rval;
295
296 mmc_writel(host, REG_GCTRL, SDXC_HARDWARE_RESET);
297 do {
298 rval = mmc_readl(host, REG_GCTRL);
299 } while (time_before(jiffies, expire) && (rval & SDXC_HARDWARE_RESET));
300
301 if (rval & SDXC_HARDWARE_RESET) {
302 dev_err(mmc_dev(host->mmc), "fatal err reset timeout\n");
303 return -EIO;
304 }
305
306 return 0;
307 }
308
309 static int sunxi_mmc_init_host(struct mmc_host *mmc)
310 {
311 u32 rval;
312 struct sunxi_mmc_host *host = mmc_priv(mmc);
313
314 if (sunxi_mmc_reset_host(host))
315 return -EIO;
316
317 /*
318 * Burst 8 transfers, RX trigger level: 7, TX trigger level: 8
319 *
320 * TODO: sun9i has a larger FIFO and supports higher trigger values
321 */
322 mmc_writel(host, REG_FTRGL, 0x20070008);
323 /* Maximum timeout value */
324 mmc_writel(host, REG_TMOUT, 0xffffffff);
325 /* Unmask SDIO interrupt if needed */
326 mmc_writel(host, REG_IMASK, host->sdio_imask);
327 /* Clear all pending interrupts */
328 mmc_writel(host, REG_RINTR, 0xffffffff);
329 /* Debug register? undocumented */
330 mmc_writel(host, REG_DBGC, 0xdeb);
331 /* Enable CEATA support */
332 mmc_writel(host, REG_FUNS, SDXC_CEATA_ON);
333 /* Set DMA descriptor list base address */
334 mmc_writel(host, REG_DLBA, host->sg_dma);
335
336 rval = mmc_readl(host, REG_GCTRL);
337 rval |= SDXC_INTERRUPT_ENABLE_BIT;
338 /* Undocumented, but found in Allwinner code */
339 rval &= ~SDXC_ACCESS_DONE_DIRECT;
340 mmc_writel(host, REG_GCTRL, rval);
341
342 return 0;
343 }
344
345 static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
346 struct mmc_data *data)
347 {
348 struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu;
349 dma_addr_t next_desc = host->sg_dma;
350 int i, max_len = (1 << host->cfg->idma_des_size_bits);
351
352 for (i = 0; i < data->sg_len; i++) {
353 pdes[i].config = cpu_to_le32(SDXC_IDMAC_DES0_CH |
354 SDXC_IDMAC_DES0_OWN |
355 SDXC_IDMAC_DES0_DIC);
356
357 if (data->sg[i].length == max_len)
358 pdes[i].buf_size = 0; /* 0 == max_len */
359 else
360 pdes[i].buf_size = cpu_to_le32(data->sg[i].length);
361
362 next_desc += sizeof(struct sunxi_idma_des);
363 pdes[i].buf_addr_ptr1 =
364 cpu_to_le32(sg_dma_address(&data->sg[i]));
365 pdes[i].buf_addr_ptr2 = cpu_to_le32((u32)next_desc);
366 }
367
368 pdes[0].config |= cpu_to_le32(SDXC_IDMAC_DES0_FD);
369 pdes[i - 1].config |= cpu_to_le32(SDXC_IDMAC_DES0_LD |
370 SDXC_IDMAC_DES0_ER);
371 pdes[i - 1].config &= cpu_to_le32(~SDXC_IDMAC_DES0_DIC);
372 pdes[i - 1].buf_addr_ptr2 = 0;
373
374 /*
375 * Avoid the io-store starting the idmac hitting io-mem before the
376 * descriptors hit the main-mem.
377 */
378 wmb();
379 }
380
381 static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data)
382 {
383 if (data->flags & MMC_DATA_WRITE)
384 return DMA_TO_DEVICE;
385 else
386 return DMA_FROM_DEVICE;
387 }
388
389 static int sunxi_mmc_map_dma(struct sunxi_mmc_host *host,
390 struct mmc_data *data)
391 {
392 u32 i, dma_len;
393 struct scatterlist *sg;
394
395 dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
396 sunxi_mmc_get_dma_dir(data));
397 if (dma_len == 0) {
398 dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n");
399 return -ENOMEM;
400 }
401
402 for_each_sg(data->sg, sg, data->sg_len, i) {
403 if (sg->offset & 3 || sg->length & 3) {
404 dev_err(mmc_dev(host->mmc),
405 "unaligned scatterlist: os %x length %d\n",
406 sg->offset, sg->length);
407 return -EINVAL;
408 }
409 }
410
411 return 0;
412 }
413
414 static void sunxi_mmc_start_dma(struct sunxi_mmc_host *host,
415 struct mmc_data *data)
416 {
417 u32 rval;
418
419 sunxi_mmc_init_idma_des(host, data);
420
421 rval = mmc_readl(host, REG_GCTRL);
422 rval |= SDXC_DMA_ENABLE_BIT;
423 mmc_writel(host, REG_GCTRL, rval);
424 rval |= SDXC_DMA_RESET;
425 mmc_writel(host, REG_GCTRL, rval);
426
427 mmc_writel(host, REG_DMAC, SDXC_IDMAC_SOFT_RESET);
428
429 if (!(data->flags & MMC_DATA_WRITE))
430 mmc_writel(host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT);
431
432 mmc_writel(host, REG_DMAC,
433 SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON);
434 }
435
436 static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host,
437 struct mmc_request *req)
438 {
439 u32 arg, cmd_val, ri;
440 unsigned long expire = jiffies + msecs_to_jiffies(1000);
441
442 cmd_val = SDXC_START | SDXC_RESP_EXPIRE |
443 SDXC_STOP_ABORT_CMD | SDXC_CHECK_RESPONSE_CRC;
444
445 if (req->cmd->opcode == SD_IO_RW_EXTENDED) {
446 cmd_val |= SD_IO_RW_DIRECT;
447 arg = (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
448 ((req->cmd->arg >> 28) & 0x7);
449 } else {
450 cmd_val |= MMC_STOP_TRANSMISSION;
451 arg = 0;
452 }
453
454 mmc_writel(host, REG_CARG, arg);
455 mmc_writel(host, REG_CMDR, cmd_val);
456
457 do {
458 ri = mmc_readl(host, REG_RINTR);
459 } while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) &&
460 time_before(jiffies, expire));
461
462 if (!(ri & SDXC_COMMAND_DONE) || (ri & SDXC_INTERRUPT_ERROR_BIT)) {
463 dev_err(mmc_dev(host->mmc), "send stop command failed\n");
464 if (req->stop)
465 req->stop->resp[0] = -ETIMEDOUT;
466 } else {
467 if (req->stop)
468 req->stop->resp[0] = mmc_readl(host, REG_RESP0);
469 }
470
471 mmc_writel(host, REG_RINTR, 0xffff);
472 }
473
474 static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *host)
475 {
476 struct mmc_command *cmd = host->mrq->cmd;
477 struct mmc_data *data = host->mrq->data;
478
479 /* For some cmds timeout is normal with sd/mmc cards */
480 if ((host->int_sum & SDXC_INTERRUPT_ERROR_BIT) ==
481 SDXC_RESP_TIMEOUT && (cmd->opcode == SD_IO_SEND_OP_COND ||
482 cmd->opcode == SD_IO_RW_DIRECT))
483 return;
484
485 dev_err(mmc_dev(host->mmc),
486 "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n",
487 host->mmc->index, cmd->opcode,
488 data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "",
489 host->int_sum & SDXC_RESP_ERROR ? " RE" : "",
490 host->int_sum & SDXC_RESP_CRC_ERROR ? " RCE" : "",
491 host->int_sum & SDXC_DATA_CRC_ERROR ? " DCE" : "",
492 host->int_sum & SDXC_RESP_TIMEOUT ? " RTO" : "",
493 host->int_sum & SDXC_DATA_TIMEOUT ? " DTO" : "",
494 host->int_sum & SDXC_FIFO_RUN_ERROR ? " FE" : "",
495 host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL" : "",
496 host->int_sum & SDXC_START_BIT_ERROR ? " SBE" : "",
497 host->int_sum & SDXC_END_BIT_ERROR ? " EBE" : ""
498 );
499 }
500
501 /* Called in interrupt context! */
502 static irqreturn_t sunxi_mmc_finalize_request(struct sunxi_mmc_host *host)
503 {
504 struct mmc_request *mrq = host->mrq;
505 struct mmc_data *data = mrq->data;
506 u32 rval;
507
508 mmc_writel(host, REG_IMASK, host->sdio_imask);
509 mmc_writel(host, REG_IDIE, 0);
510
511 if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) {
512 sunxi_mmc_dump_errinfo(host);
513 mrq->cmd->error = -ETIMEDOUT;
514
515 if (data) {
516 data->error = -ETIMEDOUT;
517 host->manual_stop_mrq = mrq;
518 }
519
520 if (mrq->stop)
521 mrq->stop->error = -ETIMEDOUT;
522 } else {
523 if (mrq->cmd->flags & MMC_RSP_136) {
524 mrq->cmd->resp[0] = mmc_readl(host, REG_RESP3);
525 mrq->cmd->resp[1] = mmc_readl(host, REG_RESP2);
526 mrq->cmd->resp[2] = mmc_readl(host, REG_RESP1);
527 mrq->cmd->resp[3] = mmc_readl(host, REG_RESP0);
528 } else {
529 mrq->cmd->resp[0] = mmc_readl(host, REG_RESP0);
530 }
531
532 if (data)
533 data->bytes_xfered = data->blocks * data->blksz;
534 }
535
536 if (data) {
537 mmc_writel(host, REG_IDST, 0x337);
538 mmc_writel(host, REG_DMAC, 0);
539 rval = mmc_readl(host, REG_GCTRL);
540 rval |= SDXC_DMA_RESET;
541 mmc_writel(host, REG_GCTRL, rval);
542 rval &= ~SDXC_DMA_ENABLE_BIT;
543 mmc_writel(host, REG_GCTRL, rval);
544 rval |= SDXC_FIFO_RESET;
545 mmc_writel(host, REG_GCTRL, rval);
546 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
547 sunxi_mmc_get_dma_dir(data));
548 }
549
550 mmc_writel(host, REG_RINTR, 0xffff);
551
552 host->mrq = NULL;
553 host->int_sum = 0;
554 host->wait_dma = false;
555
556 return host->manual_stop_mrq ? IRQ_WAKE_THREAD : IRQ_HANDLED;
557 }
558
559 static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id)
560 {
561 struct sunxi_mmc_host *host = dev_id;
562 struct mmc_request *mrq;
563 u32 msk_int, idma_int;
564 bool finalize = false;
565 bool sdio_int = false;
566 irqreturn_t ret = IRQ_HANDLED;
567
568 spin_lock(&host->lock);
569
570 idma_int = mmc_readl(host, REG_IDST);
571 msk_int = mmc_readl(host, REG_MISTA);
572
573 dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n",
574 host->mrq, msk_int, idma_int);
575
576 mrq = host->mrq;
577 if (mrq) {
578 if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT)
579 host->wait_dma = false;
580
581 host->int_sum |= msk_int;
582
583 /* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finalize */
584 if ((host->int_sum & SDXC_RESP_TIMEOUT) &&
585 !(host->int_sum & SDXC_COMMAND_DONE))
586 mmc_writel(host, REG_IMASK,
587 host->sdio_imask | SDXC_COMMAND_DONE);
588 /* Don't wait for dma on error */
589 else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT)
590 finalize = true;
591 else if ((host->int_sum & SDXC_INTERRUPT_DONE_BIT) &&
592 !host->wait_dma)
593 finalize = true;
594 }
595
596 if (msk_int & SDXC_SDIO_INTERRUPT)
597 sdio_int = true;
598
599 mmc_writel(host, REG_RINTR, msk_int);
600 mmc_writel(host, REG_IDST, idma_int);
601
602 if (finalize)
603 ret = sunxi_mmc_finalize_request(host);
604
605 spin_unlock(&host->lock);
606
607 if (finalize && ret == IRQ_HANDLED)
608 mmc_request_done(host->mmc, mrq);
609
610 if (sdio_int)
611 mmc_signal_sdio_irq(host->mmc);
612
613 return ret;
614 }
615
616 static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id)
617 {
618 struct sunxi_mmc_host *host = dev_id;
619 struct mmc_request *mrq;
620 unsigned long iflags;
621
622 spin_lock_irqsave(&host->lock, iflags);
623 mrq = host->manual_stop_mrq;
624 spin_unlock_irqrestore(&host->lock, iflags);
625
626 if (!mrq) {
627 dev_err(mmc_dev(host->mmc), "no request for manual stop\n");
628 return IRQ_HANDLED;
629 }
630
631 dev_err(mmc_dev(host->mmc), "data error, sending stop command\n");
632
633 /*
634 * We will never have more than one outstanding request,
635 * and we do not complete the request until after
636 * we've cleared host->manual_stop_mrq so we do not need to
637 * spin lock this function.
638 * Additionally we have wait states within this function
639 * so having it in a lock is a very bad idea.
640 */
641 sunxi_mmc_send_manual_stop(host, mrq);
642
643 spin_lock_irqsave(&host->lock, iflags);
644 host->manual_stop_mrq = NULL;
645 spin_unlock_irqrestore(&host->lock, iflags);
646
647 mmc_request_done(host->mmc, mrq);
648
649 return IRQ_HANDLED;
650 }
651
652 static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
653 {
654 unsigned long expire = jiffies + msecs_to_jiffies(750);
655 u32 rval;
656
657 rval = mmc_readl(host, REG_CLKCR);
658 rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON);
659
660 if (oclk_en)
661 rval |= SDXC_CARD_CLOCK_ON;
662
663 mmc_writel(host, REG_CLKCR, rval);
664
665 rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER;
666 mmc_writel(host, REG_CMDR, rval);
667
668 do {
669 rval = mmc_readl(host, REG_CMDR);
670 } while (time_before(jiffies, expire) && (rval & SDXC_START));
671
672 /* clear irq status bits set by the command */
673 mmc_writel(host, REG_RINTR,
674 mmc_readl(host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT);
675
676 if (rval & SDXC_START) {
677 dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n");
678 return -EIO;
679 }
680
681 return 0;
682 }
683
684 static int sunxi_mmc_calibrate(struct sunxi_mmc_host *host, int reg_off)
685 {
686 u32 reg = readl(host->reg_base + reg_off);
687 u32 delay;
688 unsigned long timeout;
689
690 if (!host->cfg->can_calibrate)
691 return 0;
692
693 reg &= ~(SDXC_CAL_DL_MASK << SDXC_CAL_DL_SW_SHIFT);
694 reg &= ~SDXC_CAL_DL_SW_EN;
695
696 writel(reg | SDXC_CAL_START, host->reg_base + reg_off);
697
698 dev_dbg(mmc_dev(host->mmc), "calibration started\n");
699
700 timeout = jiffies + HZ * SDXC_CAL_TIMEOUT;
701
702 while (!((reg = readl(host->reg_base + reg_off)) & SDXC_CAL_DONE)) {
703 if (time_before(jiffies, timeout))
704 cpu_relax();
705 else {
706 reg &= ~SDXC_CAL_START;
707 writel(reg, host->reg_base + reg_off);
708
709 return -ETIMEDOUT;
710 }
711 }
712
713 delay = (reg >> SDXC_CAL_DL_SHIFT) & SDXC_CAL_DL_MASK;
714
715 reg &= ~SDXC_CAL_START;
716 reg |= (delay << SDXC_CAL_DL_SW_SHIFT) | SDXC_CAL_DL_SW_EN;
717
718 writel(reg, host->reg_base + reg_off);
719
720 dev_dbg(mmc_dev(host->mmc), "calibration ended, reg is 0x%x\n", reg);
721
722 return 0;
723 }
724
725 static int sunxi_mmc_clk_set_phase(struct sunxi_mmc_host *host,
726 struct mmc_ios *ios, u32 rate)
727 {
728 int index;
729
730 if (!host->cfg->clk_delays)
731 return 0;
732
733 /* determine delays */
734 if (rate <= 400000) {
735 index = SDXC_CLK_400K;
736 } else if (rate <= 25000000) {
737 index = SDXC_CLK_25M;
738 } else if (rate <= 52000000) {
739 if (ios->timing != MMC_TIMING_UHS_DDR50 &&
740 ios->timing != MMC_TIMING_MMC_DDR52) {
741 index = SDXC_CLK_50M;
742 } else if (ios->bus_width == MMC_BUS_WIDTH_8) {
743 index = SDXC_CLK_50M_DDR_8BIT;
744 } else {
745 index = SDXC_CLK_50M_DDR;
746 }
747 } else {
748 return -EINVAL;
749 }
750
751 clk_set_phase(host->clk_sample, host->cfg->clk_delays[index].sample);
752 clk_set_phase(host->clk_output, host->cfg->clk_delays[index].output);
753
754 return 0;
755 }
756
757 static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
758 struct mmc_ios *ios)
759 {
760 long rate;
761 u32 rval, clock = ios->clock;
762 int ret;
763
764 /* 8 bit DDR requires a higher module clock */
765 if (ios->timing == MMC_TIMING_MMC_DDR52 &&
766 ios->bus_width == MMC_BUS_WIDTH_8)
767 clock <<= 1;
768
769 rate = clk_round_rate(host->clk_mmc, clock);
770 if (rate < 0) {
771 dev_err(mmc_dev(host->mmc), "error rounding clk to %d: %ld\n",
772 clock, rate);
773 return rate;
774 }
775 dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %ld\n",
776 clock, rate);
777
778 /* setting clock rate */
779 ret = clk_set_rate(host->clk_mmc, rate);
780 if (ret) {
781 dev_err(mmc_dev(host->mmc), "error setting clk to %ld: %d\n",
782 rate, ret);
783 return ret;
784 }
785
786 ret = sunxi_mmc_oclk_onoff(host, 0);
787 if (ret)
788 return ret;
789
790 /* clear internal divider */
791 rval = mmc_readl(host, REG_CLKCR);
792 rval &= ~0xff;
793 /* set internal divider for 8 bit eMMC DDR, so card clock is right */
794 if (ios->timing == MMC_TIMING_MMC_DDR52 &&
795 ios->bus_width == MMC_BUS_WIDTH_8) {
796 rval |= 1;
797 rate >>= 1;
798 }
799 mmc_writel(host, REG_CLKCR, rval);
800
801 ret = sunxi_mmc_clk_set_phase(host, ios, rate);
802 if (ret)
803 return ret;
804
805 ret = sunxi_mmc_calibrate(host, SDXC_REG_SAMP_DL_REG);
806 if (ret)
807 return ret;
808
809 /* TODO: enable calibrate on sdc2 SDXC_REG_DS_DL_REG of A64 */
810
811 return sunxi_mmc_oclk_onoff(host, 1);
812 }
813
814 static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
815 {
816 struct sunxi_mmc_host *host = mmc_priv(mmc);
817 u32 rval;
818
819 /* Set the power state */
820 switch (ios->power_mode) {
821 case MMC_POWER_ON:
822 break;
823
824 case MMC_POWER_UP:
825 host->ferror = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
826 ios->vdd);
827 if (host->ferror)
828 return;
829
830 if (!IS_ERR(mmc->supply.vqmmc)) {
831 host->ferror = regulator_enable(mmc->supply.vqmmc);
832 if (host->ferror) {
833 dev_err(mmc_dev(mmc),
834 "failed to enable vqmmc\n");
835 return;
836 }
837 host->vqmmc_enabled = true;
838 }
839
840 host->ferror = sunxi_mmc_init_host(mmc);
841 if (host->ferror)
842 return;
843
844 dev_dbg(mmc_dev(mmc), "power on!\n");
845 break;
846
847 case MMC_POWER_OFF:
848 dev_dbg(mmc_dev(mmc), "power off!\n");
849 sunxi_mmc_reset_host(host);
850 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
851 if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled)
852 regulator_disable(mmc->supply.vqmmc);
853 host->vqmmc_enabled = false;
854 break;
855 }
856
857 /* set bus width */
858 switch (ios->bus_width) {
859 case MMC_BUS_WIDTH_1:
860 mmc_writel(host, REG_WIDTH, SDXC_WIDTH1);
861 break;
862 case MMC_BUS_WIDTH_4:
863 mmc_writel(host, REG_WIDTH, SDXC_WIDTH4);
864 break;
865 case MMC_BUS_WIDTH_8:
866 mmc_writel(host, REG_WIDTH, SDXC_WIDTH8);
867 break;
868 }
869
870 /* set ddr mode */
871 rval = mmc_readl(host, REG_GCTRL);
872 if (ios->timing == MMC_TIMING_UHS_DDR50 ||
873 ios->timing == MMC_TIMING_MMC_DDR52)
874 rval |= SDXC_DDR_MODE;
875 else
876 rval &= ~SDXC_DDR_MODE;
877 mmc_writel(host, REG_GCTRL, rval);
878
879 /* set up clock */
880 if (ios->clock && ios->power_mode) {
881 host->ferror = sunxi_mmc_clk_set_rate(host, ios);
882 /* Android code had a usleep_range(50000, 55000); here */
883 }
884 }
885
886 static int sunxi_mmc_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
887 {
888 /* vqmmc regulator is available */
889 if (!IS_ERR(mmc->supply.vqmmc))
890 return mmc_regulator_set_vqmmc(mmc, ios);
891
892 /* no vqmmc regulator, assume fixed regulator at 3/3.3V */
893 if (mmc->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330)
894 return 0;
895
896 return -EINVAL;
897 }
898
899 static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
900 {
901 struct sunxi_mmc_host *host = mmc_priv(mmc);
902 unsigned long flags;
903 u32 imask;
904
905 spin_lock_irqsave(&host->lock, flags);
906
907 imask = mmc_readl(host, REG_IMASK);
908 if (enable) {
909 host->sdio_imask = SDXC_SDIO_INTERRUPT;
910 imask |= SDXC_SDIO_INTERRUPT;
911 } else {
912 host->sdio_imask = 0;
913 imask &= ~SDXC_SDIO_INTERRUPT;
914 }
915 mmc_writel(host, REG_IMASK, imask);
916 spin_unlock_irqrestore(&host->lock, flags);
917 }
918
919 static void sunxi_mmc_hw_reset(struct mmc_host *mmc)
920 {
921 struct sunxi_mmc_host *host = mmc_priv(mmc);
922 mmc_writel(host, REG_HWRST, 0);
923 udelay(10);
924 mmc_writel(host, REG_HWRST, 1);
925 udelay(300);
926 }
927
928 static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
929 {
930 struct sunxi_mmc_host *host = mmc_priv(mmc);
931 struct mmc_command *cmd = mrq->cmd;
932 struct mmc_data *data = mrq->data;
933 unsigned long iflags;
934 u32 imask = SDXC_INTERRUPT_ERROR_BIT;
935 u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f);
936 bool wait_dma = host->wait_dma;
937 int ret;
938
939 /* Check for set_ios errors (should never happen) */
940 if (host->ferror) {
941 mrq->cmd->error = host->ferror;
942 mmc_request_done(mmc, mrq);
943 return;
944 }
945
946 if (data) {
947 ret = sunxi_mmc_map_dma(host, data);
948 if (ret < 0) {
949 dev_err(mmc_dev(mmc), "map DMA failed\n");
950 cmd->error = ret;
951 data->error = ret;
952 mmc_request_done(mmc, mrq);
953 return;
954 }
955 }
956
957 if (cmd->opcode == MMC_GO_IDLE_STATE) {
958 cmd_val |= SDXC_SEND_INIT_SEQUENCE;
959 imask |= SDXC_COMMAND_DONE;
960 }
961
962 if (cmd->flags & MMC_RSP_PRESENT) {
963 cmd_val |= SDXC_RESP_EXPIRE;
964 if (cmd->flags & MMC_RSP_136)
965 cmd_val |= SDXC_LONG_RESPONSE;
966 if (cmd->flags & MMC_RSP_CRC)
967 cmd_val |= SDXC_CHECK_RESPONSE_CRC;
968
969 if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) {
970 cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER;
971
972 if (cmd->data->stop) {
973 imask |= SDXC_AUTO_COMMAND_DONE;
974 cmd_val |= SDXC_SEND_AUTO_STOP;
975 } else {
976 imask |= SDXC_DATA_OVER;
977 }
978
979 if (cmd->data->flags & MMC_DATA_WRITE)
980 cmd_val |= SDXC_WRITE;
981 else
982 wait_dma = true;
983 } else {
984 imask |= SDXC_COMMAND_DONE;
985 }
986 } else {
987 imask |= SDXC_COMMAND_DONE;
988 }
989
990 dev_dbg(mmc_dev(mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n",
991 cmd_val & 0x3f, cmd_val, cmd->arg, imask,
992 mrq->data ? mrq->data->blksz * mrq->data->blocks : 0);
993
994 spin_lock_irqsave(&host->lock, iflags);
995
996 if (host->mrq || host->manual_stop_mrq) {
997 spin_unlock_irqrestore(&host->lock, iflags);
998
999 if (data)
1000 dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
1001 sunxi_mmc_get_dma_dir(data));
1002
1003 dev_err(mmc_dev(mmc), "request already pending\n");
1004 mrq->cmd->error = -EBUSY;
1005 mmc_request_done(mmc, mrq);
1006 return;
1007 }
1008
1009 if (data) {
1010 mmc_writel(host, REG_BLKSZ, data->blksz);
1011 mmc_writel(host, REG_BCNTR, data->blksz * data->blocks);
1012 sunxi_mmc_start_dma(host, data);
1013 }
1014
1015 host->mrq = mrq;
1016 host->wait_dma = wait_dma;
1017 mmc_writel(host, REG_IMASK, host->sdio_imask | imask);
1018 mmc_writel(host, REG_CARG, cmd->arg);
1019 mmc_writel(host, REG_CMDR, cmd_val);
1020
1021 spin_unlock_irqrestore(&host->lock, iflags);
1022 }
1023
1024 static int sunxi_mmc_card_busy(struct mmc_host *mmc)
1025 {
1026 struct sunxi_mmc_host *host = mmc_priv(mmc);
1027
1028 return !!(mmc_readl(host, REG_STAS) & SDXC_CARD_DATA_BUSY);
1029 }
1030
1031 static struct mmc_host_ops sunxi_mmc_ops = {
1032 .request = sunxi_mmc_request,
1033 .set_ios = sunxi_mmc_set_ios,
1034 .get_ro = mmc_gpio_get_ro,
1035 .get_cd = mmc_gpio_get_cd,
1036 .enable_sdio_irq = sunxi_mmc_enable_sdio_irq,
1037 .start_signal_voltage_switch = sunxi_mmc_volt_switch,
1038 .hw_reset = sunxi_mmc_hw_reset,
1039 .card_busy = sunxi_mmc_card_busy,
1040 };
1041
1042 static const struct sunxi_mmc_clk_delay sunxi_mmc_clk_delays[] = {
1043 [SDXC_CLK_400K] = { .output = 180, .sample = 180 },
1044 [SDXC_CLK_25M] = { .output = 180, .sample = 75 },
1045 [SDXC_CLK_50M] = { .output = 90, .sample = 120 },
1046 [SDXC_CLK_50M_DDR] = { .output = 60, .sample = 120 },
1047 /* Value from A83T "new timing mode". Works but might not be right. */
1048 [SDXC_CLK_50M_DDR_8BIT] = { .output = 90, .sample = 180 },
1049 };
1050
1051 static const struct sunxi_mmc_clk_delay sun9i_mmc_clk_delays[] = {
1052 [SDXC_CLK_400K] = { .output = 180, .sample = 180 },
1053 [SDXC_CLK_25M] = { .output = 180, .sample = 75 },
1054 [SDXC_CLK_50M] = { .output = 150, .sample = 120 },
1055 [SDXC_CLK_50M_DDR] = { .output = 54, .sample = 36 },
1056 [SDXC_CLK_50M_DDR_8BIT] = { .output = 72, .sample = 72 },
1057 };
1058
1059 static const struct sunxi_mmc_cfg sun4i_a10_cfg = {
1060 .idma_des_size_bits = 13,
1061 .clk_delays = NULL,
1062 .can_calibrate = false,
1063 };
1064
1065 static const struct sunxi_mmc_cfg sun5i_a13_cfg = {
1066 .idma_des_size_bits = 16,
1067 .clk_delays = NULL,
1068 .can_calibrate = false,
1069 };
1070
1071 static const struct sunxi_mmc_cfg sun7i_a20_cfg = {
1072 .idma_des_size_bits = 16,
1073 .clk_delays = sunxi_mmc_clk_delays,
1074 .can_calibrate = false,
1075 };
1076
1077 static const struct sunxi_mmc_cfg sun9i_a80_cfg = {
1078 .idma_des_size_bits = 16,
1079 .clk_delays = sun9i_mmc_clk_delays,
1080 .can_calibrate = false,
1081 };
1082
1083 static const struct sunxi_mmc_cfg sun50i_a64_cfg = {
1084 .idma_des_size_bits = 16,
1085 .clk_delays = NULL,
1086 .can_calibrate = true,
1087 };
1088
1089 static const struct of_device_id sunxi_mmc_of_match[] = {
1090 { .compatible = "allwinner,sun4i-a10-mmc", .data = &sun4i_a10_cfg },
1091 { .compatible = "allwinner,sun5i-a13-mmc", .data = &sun5i_a13_cfg },
1092 { .compatible = "allwinner,sun7i-a20-mmc", .data = &sun7i_a20_cfg },
1093 { .compatible = "allwinner,sun9i-a80-mmc", .data = &sun9i_a80_cfg },
1094 { .compatible = "allwinner,sun50i-a64-mmc", .data = &sun50i_a64_cfg },
1095 { /* sentinel */ }
1096 };
1097 MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
1098
1099 static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
1100 struct platform_device *pdev)
1101 {
1102 int ret;
1103
1104 host->cfg = of_device_get_match_data(&pdev->dev);
1105 if (!host->cfg)
1106 return -EINVAL;
1107
1108 ret = mmc_regulator_get_supply(host->mmc);
1109 if (ret) {
1110 if (ret != -EPROBE_DEFER)
1111 dev_err(&pdev->dev, "Could not get vmmc supply\n");
1112 return ret;
1113 }
1114
1115 host->reg_base = devm_ioremap_resource(&pdev->dev,
1116 platform_get_resource(pdev, IORESOURCE_MEM, 0));
1117 if (IS_ERR(host->reg_base))
1118 return PTR_ERR(host->reg_base);
1119
1120 host->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
1121 if (IS_ERR(host->clk_ahb)) {
1122 dev_err(&pdev->dev, "Could not get ahb clock\n");
1123 return PTR_ERR(host->clk_ahb);
1124 }
1125
1126 host->clk_mmc = devm_clk_get(&pdev->dev, "mmc");
1127 if (IS_ERR(host->clk_mmc)) {
1128 dev_err(&pdev->dev, "Could not get mmc clock\n");
1129 return PTR_ERR(host->clk_mmc);
1130 }
1131
1132 if (host->cfg->clk_delays) {
1133 host->clk_output = devm_clk_get(&pdev->dev, "output");
1134 if (IS_ERR(host->clk_output)) {
1135 dev_err(&pdev->dev, "Could not get output clock\n");
1136 return PTR_ERR(host->clk_output);
1137 }
1138
1139 host->clk_sample = devm_clk_get(&pdev->dev, "sample");
1140 if (IS_ERR(host->clk_sample)) {
1141 dev_err(&pdev->dev, "Could not get sample clock\n");
1142 return PTR_ERR(host->clk_sample);
1143 }
1144 }
1145
1146 host->reset = devm_reset_control_get_optional(&pdev->dev, "ahb");
1147 if (PTR_ERR(host->reset) == -EPROBE_DEFER)
1148 return PTR_ERR(host->reset);
1149
1150 ret = clk_prepare_enable(host->clk_ahb);
1151 if (ret) {
1152 dev_err(&pdev->dev, "Enable ahb clk err %d\n", ret);
1153 return ret;
1154 }
1155
1156 ret = clk_prepare_enable(host->clk_mmc);
1157 if (ret) {
1158 dev_err(&pdev->dev, "Enable mmc clk err %d\n", ret);
1159 goto error_disable_clk_ahb;
1160 }
1161
1162 ret = clk_prepare_enable(host->clk_output);
1163 if (ret) {
1164 dev_err(&pdev->dev, "Enable output clk err %d\n", ret);
1165 goto error_disable_clk_mmc;
1166 }
1167
1168 ret = clk_prepare_enable(host->clk_sample);
1169 if (ret) {
1170 dev_err(&pdev->dev, "Enable sample clk err %d\n", ret);
1171 goto error_disable_clk_output;
1172 }
1173
1174 if (!IS_ERR(host->reset)) {
1175 ret = reset_control_deassert(host->reset);
1176 if (ret) {
1177 dev_err(&pdev->dev, "reset err %d\n", ret);
1178 goto error_disable_clk_sample;
1179 }
1180 }
1181
1182 /*
1183 * Sometimes the controller asserts the irq on boot for some reason,
1184 * make sure the controller is in a sane state before enabling irqs.
1185 */
1186 ret = sunxi_mmc_reset_host(host);
1187 if (ret)
1188 goto error_assert_reset;
1189
1190 host->irq = platform_get_irq(pdev, 0);
1191 return devm_request_threaded_irq(&pdev->dev, host->irq, sunxi_mmc_irq,
1192 sunxi_mmc_handle_manual_stop, 0, "sunxi-mmc", host);
1193
1194 error_assert_reset:
1195 if (!IS_ERR(host->reset))
1196 reset_control_assert(host->reset);
1197 error_disable_clk_sample:
1198 clk_disable_unprepare(host->clk_sample);
1199 error_disable_clk_output:
1200 clk_disable_unprepare(host->clk_output);
1201 error_disable_clk_mmc:
1202 clk_disable_unprepare(host->clk_mmc);
1203 error_disable_clk_ahb:
1204 clk_disable_unprepare(host->clk_ahb);
1205 return ret;
1206 }
1207
1208 static int sunxi_mmc_probe(struct platform_device *pdev)
1209 {
1210 struct sunxi_mmc_host *host;
1211 struct mmc_host *mmc;
1212 int ret;
1213
1214 mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev);
1215 if (!mmc) {
1216 dev_err(&pdev->dev, "mmc alloc host failed\n");
1217 return -ENOMEM;
1218 }
1219
1220 host = mmc_priv(mmc);
1221 host->mmc = mmc;
1222 spin_lock_init(&host->lock);
1223
1224 ret = sunxi_mmc_resource_request(host, pdev);
1225 if (ret)
1226 goto error_free_host;
1227
1228 host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE,
1229 &host->sg_dma, GFP_KERNEL);
1230 if (!host->sg_cpu) {
1231 dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n");
1232 ret = -ENOMEM;
1233 goto error_free_host;
1234 }
1235
1236 mmc->ops = &sunxi_mmc_ops;
1237 mmc->max_blk_count = 8192;
1238 mmc->max_blk_size = 4096;
1239 mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des);
1240 mmc->max_seg_size = (1 << host->cfg->idma_des_size_bits);
1241 mmc->max_req_size = mmc->max_seg_size * mmc->max_segs;
1242 /* 400kHz ~ 52MHz */
1243 mmc->f_min = 400000;
1244 mmc->f_max = 52000000;
1245 mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
1246 MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
1247
1248 if (host->cfg->clk_delays)
1249 mmc->caps |= MMC_CAP_1_8V_DDR;
1250
1251 ret = mmc_of_parse(mmc);
1252 if (ret)
1253 goto error_free_dma;
1254
1255 ret = mmc_add_host(mmc);
1256 if (ret)
1257 goto error_free_dma;
1258
1259 dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq);
1260 platform_set_drvdata(pdev, mmc);
1261 return 0;
1262
1263 error_free_dma:
1264 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
1265 error_free_host:
1266 mmc_free_host(mmc);
1267 return ret;
1268 }
1269
1270 static int sunxi_mmc_remove(struct platform_device *pdev)
1271 {
1272 struct mmc_host *mmc = platform_get_drvdata(pdev);
1273 struct sunxi_mmc_host *host = mmc_priv(mmc);
1274
1275 mmc_remove_host(mmc);
1276 disable_irq(host->irq);
1277 sunxi_mmc_reset_host(host);
1278
1279 if (!IS_ERR(host->reset))
1280 reset_control_assert(host->reset);
1281
1282 clk_disable_unprepare(host->clk_sample);
1283 clk_disable_unprepare(host->clk_output);
1284 clk_disable_unprepare(host->clk_mmc);
1285 clk_disable_unprepare(host->clk_ahb);
1286
1287 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
1288 mmc_free_host(mmc);
1289
1290 return 0;
1291 }
1292
1293 static struct platform_driver sunxi_mmc_driver = {
1294 .driver = {
1295 .name = "sunxi-mmc",
1296 .of_match_table = of_match_ptr(sunxi_mmc_of_match),
1297 },
1298 .probe = sunxi_mmc_probe,
1299 .remove = sunxi_mmc_remove,
1300 };
1301 module_platform_driver(sunxi_mmc_driver);
1302
1303 MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver");
1304 MODULE_LICENSE("GPL v2");
1305 MODULE_AUTHOR("David Lanzend�rfer <david.lanzendoerfer@o2s.ch>");
1306 MODULE_ALIAS("platform:sunxi-mmc");
Linux with added FPC-III support