2 * Reset driver for NXP LPC18xx/43xx Reset Generation Unit (RGU).
4 * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include <linux/clk.h>
13 #include <linux/delay.h>
14 #include <linux/err.h>
16 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/reboot.h>
20 #include <linux/reset-controller.h>
21 #include <linux/spinlock.h>
23 /* LPC18xx RGU registers */
24 #define LPC18XX_RGU_CTRL0 0x100
25 #define LPC18XX_RGU_CTRL1 0x104
26 #define LPC18XX_RGU_ACTIVE_STATUS0 0x150
27 #define LPC18XX_RGU_ACTIVE_STATUS1 0x154
29 #define LPC18XX_RGU_RESETS_PER_REG 32
31 /* Internal reset outputs */
32 #define LPC18XX_RGU_CORE_RST 0
33 #define LPC43XX_RGU_M0SUB_RST 12
34 #define LPC43XX_RGU_M0APP_RST 56
36 struct lpc18xx_rgu_data
{
37 struct reset_controller_dev rcdev
;
38 struct notifier_block restart_nb
;
39 struct clk
*clk_delay
;
46 #define to_rgu_data(p) container_of(p, struct lpc18xx_rgu_data, rcdev)
48 static int lpc18xx_rgu_restart(struct notifier_block
*nb
, unsigned long mode
,
51 struct lpc18xx_rgu_data
*rc
= container_of(nb
, struct lpc18xx_rgu_data
,
54 writel(BIT(LPC18XX_RGU_CORE_RST
), rc
->base
+ LPC18XX_RGU_CTRL0
);
57 pr_emerg("%s: unable to restart system\n", __func__
);
63 * The LPC18xx RGU has mostly self-deasserting resets except for the
64 * two reset lines going to the internal Cortex-M0 cores.
66 * To prevent the M0 core resets from accidentally getting deasserted
67 * status register must be check and bits in control register set to
70 static int lpc18xx_rgu_setclear_reset(struct reset_controller_dev
*rcdev
,
71 unsigned long id
, bool set
)
73 struct lpc18xx_rgu_data
*rc
= to_rgu_data(rcdev
);
74 u32 stat_offset
= LPC18XX_RGU_ACTIVE_STATUS0
;
75 u32 ctrl_offset
= LPC18XX_RGU_CTRL0
;
79 stat_offset
+= (id
/ LPC18XX_RGU_RESETS_PER_REG
) * sizeof(u32
);
80 ctrl_offset
+= (id
/ LPC18XX_RGU_RESETS_PER_REG
) * sizeof(u32
);
81 rst_bit
= 1 << (id
% LPC18XX_RGU_RESETS_PER_REG
);
83 spin_lock_irqsave(&rc
->lock
, flags
);
84 stat
= ~readl(rc
->base
+ stat_offset
);
86 writel(stat
| rst_bit
, rc
->base
+ ctrl_offset
);
88 writel(stat
& ~rst_bit
, rc
->base
+ ctrl_offset
);
89 spin_unlock_irqrestore(&rc
->lock
, flags
);
94 static int lpc18xx_rgu_assert(struct reset_controller_dev
*rcdev
,
97 return lpc18xx_rgu_setclear_reset(rcdev
, id
, true);
100 static int lpc18xx_rgu_deassert(struct reset_controller_dev
*rcdev
,
103 return lpc18xx_rgu_setclear_reset(rcdev
, id
, false);
106 /* Only M0 cores require explicit reset deassert */
107 static int lpc18xx_rgu_reset(struct reset_controller_dev
*rcdev
,
110 struct lpc18xx_rgu_data
*rc
= to_rgu_data(rcdev
);
112 lpc18xx_rgu_assert(rcdev
, id
);
113 udelay(rc
->delay_us
);
116 case LPC43XX_RGU_M0SUB_RST
:
117 case LPC43XX_RGU_M0APP_RST
:
118 lpc18xx_rgu_setclear_reset(rcdev
, id
, false);
124 static int lpc18xx_rgu_status(struct reset_controller_dev
*rcdev
,
127 struct lpc18xx_rgu_data
*rc
= to_rgu_data(rcdev
);
128 u32 bit
, offset
= LPC18XX_RGU_ACTIVE_STATUS0
;
130 offset
+= (id
/ LPC18XX_RGU_RESETS_PER_REG
) * sizeof(u32
);
131 bit
= 1 << (id
% LPC18XX_RGU_RESETS_PER_REG
);
133 return !(readl(rc
->base
+ offset
) & bit
);
136 static const struct reset_control_ops lpc18xx_rgu_ops
= {
137 .reset
= lpc18xx_rgu_reset
,
138 .assert = lpc18xx_rgu_assert
,
139 .deassert
= lpc18xx_rgu_deassert
,
140 .status
= lpc18xx_rgu_status
,
143 static int lpc18xx_rgu_probe(struct platform_device
*pdev
)
145 struct lpc18xx_rgu_data
*rc
;
146 struct resource
*res
;
150 rc
= devm_kzalloc(&pdev
->dev
, sizeof(*rc
), GFP_KERNEL
);
154 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
155 rc
->base
= devm_ioremap_resource(&pdev
->dev
, res
);
156 if (IS_ERR(rc
->base
))
157 return PTR_ERR(rc
->base
);
159 rc
->clk_reg
= devm_clk_get(&pdev
->dev
, "reg");
160 if (IS_ERR(rc
->clk_reg
)) {
161 dev_err(&pdev
->dev
, "reg clock not found\n");
162 return PTR_ERR(rc
->clk_reg
);
165 rc
->clk_delay
= devm_clk_get(&pdev
->dev
, "delay");
166 if (IS_ERR(rc
->clk_delay
)) {
167 dev_err(&pdev
->dev
, "delay clock not found\n");
168 return PTR_ERR(rc
->clk_delay
);
171 ret
= clk_prepare_enable(rc
->clk_reg
);
173 dev_err(&pdev
->dev
, "unable to enable reg clock\n");
177 ret
= clk_prepare_enable(rc
->clk_delay
);
179 dev_err(&pdev
->dev
, "unable to enable delay clock\n");
183 fcclk
= clk_get_rate(rc
->clk_reg
) / USEC_PER_SEC
;
184 firc
= clk_get_rate(rc
->clk_delay
) / USEC_PER_SEC
;
185 if (fcclk
== 0 || firc
== 0)
188 rc
->delay_us
= DIV_ROUND_UP(fcclk
, firc
* firc
);
190 spin_lock_init(&rc
->lock
);
192 rc
->rcdev
.owner
= THIS_MODULE
;
193 rc
->rcdev
.nr_resets
= 64;
194 rc
->rcdev
.ops
= &lpc18xx_rgu_ops
;
195 rc
->rcdev
.of_node
= pdev
->dev
.of_node
;
197 platform_set_drvdata(pdev
, rc
);
199 ret
= reset_controller_register(&rc
->rcdev
);
201 dev_err(&pdev
->dev
, "unable to register device\n");
205 rc
->restart_nb
.priority
= 192,
206 rc
->restart_nb
.notifier_call
= lpc18xx_rgu_restart
,
207 ret
= register_restart_handler(&rc
->restart_nb
);
209 dev_warn(&pdev
->dev
, "failed to register restart handler\n");
214 clk_disable_unprepare(rc
->clk_delay
);
216 clk_disable_unprepare(rc
->clk_reg
);
221 static int lpc18xx_rgu_remove(struct platform_device
*pdev
)
223 struct lpc18xx_rgu_data
*rc
= platform_get_drvdata(pdev
);
226 ret
= unregister_restart_handler(&rc
->restart_nb
);
228 dev_warn(&pdev
->dev
, "failed to unregister restart handler\n");
230 reset_controller_unregister(&rc
->rcdev
);
232 clk_disable_unprepare(rc
->clk_delay
);
233 clk_disable_unprepare(rc
->clk_reg
);
238 static const struct of_device_id lpc18xx_rgu_match
[] = {
239 { .compatible
= "nxp,lpc1850-rgu" },
242 MODULE_DEVICE_TABLE(of
, lpc18xx_rgu_match
);
244 static struct platform_driver lpc18xx_rgu_driver
= {
245 .probe
= lpc18xx_rgu_probe
,
246 .remove
= lpc18xx_rgu_remove
,
248 .name
= "lpc18xx-reset",
249 .of_match_table
= lpc18xx_rgu_match
,
252 module_platform_driver(lpc18xx_rgu_driver
);
254 MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
255 MODULE_DESCRIPTION("Reset driver for LPC18xx/43xx RGU");
256 MODULE_LICENSE("GPL v2");