x86, numa: Reduce minimum fake node size to 32M
[linux/fpc-iii.git] / drivers / mtd / nand / ppchameleonevb.c
blobcc86584318512acc1b00547d3d87404bf95a98a0
1 /*
2 * drivers/mtd/nand/ppchameleonevb.c
4 * Copyright (C) 2003 DAVE Srl (info@wawnet.biz)
6 * Derived from drivers/mtd/nand/edb7312.c
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
13 * Overview:
14 * This is a device driver for the NAND flash devices found on the
15 * PPChameleon/PPChameleonEVB system.
16 * PPChameleon options (autodetected):
17 * - BA model: no NAND
18 * - ME model: 32MB (Samsung K9F5608U0B)
19 * - HI model: 128MB (Samsung K9F1G08UOM)
20 * PPChameleonEVB options:
21 * - 32MB (Samsung K9F5608U0B)
24 #include <linux/init.h>
25 #include <linux/slab.h>
26 #include <linux/module.h>
27 #include <linux/mtd/mtd.h>
28 #include <linux/mtd/nand.h>
29 #include <linux/mtd/partitions.h>
30 #include <asm/io.h>
31 #include <platforms/PPChameleonEVB.h>
33 #undef USE_READY_BUSY_PIN
34 #define USE_READY_BUSY_PIN
35 /* see datasheets (tR) */
36 #define NAND_BIG_DELAY_US 25
37 #define NAND_SMALL_DELAY_US 10
39 /* handy sizes */
40 #define SZ_4M 0x00400000
41 #define NAND_SMALL_SIZE 0x02000000
42 #define NAND_MTD_NAME "ppchameleon-nand"
43 #define NAND_EVB_MTD_NAME "ppchameleonevb-nand"
45 /* GPIO pins used to drive NAND chip mounted on processor module */
46 #define NAND_nCE_GPIO_PIN (0x80000000 >> 1)
47 #define NAND_CLE_GPIO_PIN (0x80000000 >> 2)
48 #define NAND_ALE_GPIO_PIN (0x80000000 >> 3)
49 #define NAND_RB_GPIO_PIN (0x80000000 >> 4)
50 /* GPIO pins used to drive NAND chip mounted on EVB */
51 #define NAND_EVB_nCE_GPIO_PIN (0x80000000 >> 14)
52 #define NAND_EVB_CLE_GPIO_PIN (0x80000000 >> 15)
53 #define NAND_EVB_ALE_GPIO_PIN (0x80000000 >> 16)
54 #define NAND_EVB_RB_GPIO_PIN (0x80000000 >> 31)
57 * MTD structure for PPChameleonEVB board
59 static struct mtd_info *ppchameleon_mtd = NULL;
60 static struct mtd_info *ppchameleonevb_mtd = NULL;
63 * Module stuff
65 static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR;
66 static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
68 #ifdef MODULE
69 module_param(ppchameleon_fio_pbase, ulong, 0);
70 module_param(ppchameleonevb_fio_pbase, ulong, 0);
71 #else
72 __setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase);
73 __setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase);
74 #endif
76 #ifdef CONFIG_MTD_PARTITIONS
78 * Define static partitions for flash devices
80 static struct mtd_partition partition_info_hi[] = {
81 { .name = "PPChameleon HI Nand Flash",
82 .offset = 0,
83 .size = 128 * 1024 * 1024
87 static struct mtd_partition partition_info_me[] = {
88 { .name = "PPChameleon ME Nand Flash",
89 .offset = 0,
90 .size = 32 * 1024 * 1024
94 static struct mtd_partition partition_info_evb[] = {
95 { .name = "PPChameleonEVB Nand Flash",
96 .offset = 0,
97 .size = 32 * 1024 * 1024
101 #define NUM_PARTITIONS 1
103 extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
104 #endif
107 * hardware specific access to control-lines
109 static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd,
110 unsigned int ctrl)
112 struct nand_chip *chip = mtd->priv;
114 if (ctrl & NAND_CTRL_CHANGE) {
115 #error Missing headerfiles. No way to fix this. -tglx
116 switch (cmd) {
117 case NAND_CTL_SETCLE:
118 MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
119 break;
120 case NAND_CTL_CLRCLE:
121 MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
122 break;
123 case NAND_CTL_SETALE:
124 MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
125 break;
126 case NAND_CTL_CLRALE:
127 MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
128 break;
129 case NAND_CTL_SETNCE:
130 MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
131 break;
132 case NAND_CTL_CLRNCE:
133 MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
134 break;
137 if (cmd != NAND_CMD_NONE)
138 writeb(cmd, chip->IO_ADDR_W);
141 static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd,
142 unsigned int ctrl)
144 struct nand_chip *chip = mtd->priv;
146 if (ctrl & NAND_CTRL_CHANGE) {
147 #error Missing headerfiles. No way to fix this. -tglx
148 switch (cmd) {
149 case NAND_CTL_SETCLE:
150 MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
151 break;
152 case NAND_CTL_CLRCLE:
153 MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
154 break;
155 case NAND_CTL_SETALE:
156 MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
157 break;
158 case NAND_CTL_CLRALE:
159 MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
160 break;
161 case NAND_CTL_SETNCE:
162 MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
163 break;
164 case NAND_CTL_CLRNCE:
165 MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
166 break;
169 if (cmd != NAND_CMD_NONE)
170 writeb(cmd, chip->IO_ADDR_W);
173 #ifdef USE_READY_BUSY_PIN
175 * read device ready pin
177 static int ppchameleon_device_ready(struct mtd_info *minfo)
179 if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN)
180 return 1;
181 return 0;
184 static int ppchameleonevb_device_ready(struct mtd_info *minfo)
186 if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
187 return 1;
188 return 0;
190 #endif
192 #ifdef CONFIG_MTD_PARTITIONS
193 const char *part_probes[] = { "cmdlinepart", NULL };
194 const char *part_probes_evb[] = { "cmdlinepart", NULL };
195 #endif
198 * Main initialization routine
200 static int __init ppchameleonevb_init(void)
202 struct nand_chip *this;
203 const char *part_type = 0;
204 int mtd_parts_nb = 0;
205 struct mtd_partition *mtd_parts = 0;
206 void __iomem *ppchameleon_fio_base;
207 void __iomem *ppchameleonevb_fio_base;
209 /*********************************
210 * Processor module NAND (if any) *
211 *********************************/
212 /* Allocate memory for MTD device structure and private data */
213 ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
214 if (!ppchameleon_mtd) {
215 printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
216 return -ENOMEM;
219 /* map physical address */
220 ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
221 if (!ppchameleon_fio_base) {
222 printk("ioremap PPChameleon NAND flash failed\n");
223 kfree(ppchameleon_mtd);
224 return -EIO;
227 /* Get pointer to private data */
228 this = (struct nand_chip *)(&ppchameleon_mtd[1]);
230 /* Initialize structures */
231 memset(ppchameleon_mtd, 0, sizeof(struct mtd_info));
232 memset(this, 0, sizeof(struct nand_chip));
234 /* Link the private data with the MTD structure */
235 ppchameleon_mtd->priv = this;
236 ppchameleon_mtd->owner = THIS_MODULE;
238 /* Initialize GPIOs */
239 /* Pin mapping for NAND chip */
241 CE GPIO_01
242 CLE GPIO_02
243 ALE GPIO_03
244 R/B GPIO_04
246 /* output select */
247 out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF);
248 /* three-state select */
249 out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF);
250 /* enable output driver */
251 out_be32((volatile unsigned *)GPIO0_TCR,
252 in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
253 #ifdef USE_READY_BUSY_PIN
254 /* three-state select */
255 out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF);
256 /* high-impedecence */
257 out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
258 /* input select */
259 out_be32((volatile unsigned *)GPIO0_ISR1H,
260 (in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
261 #endif
263 /* insert callbacks */
264 this->IO_ADDR_R = ppchameleon_fio_base;
265 this->IO_ADDR_W = ppchameleon_fio_base;
266 this->cmd_ctrl = ppchameleon_hwcontrol;
267 #ifdef USE_READY_BUSY_PIN
268 this->dev_ready = ppchameleon_device_ready;
269 #endif
270 this->chip_delay = NAND_BIG_DELAY_US;
271 /* ECC mode */
272 this->ecc.mode = NAND_ECC_SOFT;
274 /* Scan to find existence of the device (it could not be mounted) */
275 if (nand_scan(ppchameleon_mtd, 1)) {
276 iounmap((void *)ppchameleon_fio_base);
277 ppchameleon_fio_base = NULL;
278 kfree(ppchameleon_mtd);
279 goto nand_evb_init;
281 #ifndef USE_READY_BUSY_PIN
282 /* Adjust delay if necessary */
283 if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
284 this->chip_delay = NAND_SMALL_DELAY_US;
285 #endif
287 #ifdef CONFIG_MTD_PARTITIONS
288 ppchameleon_mtd->name = "ppchameleon-nand";
289 mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
290 if (mtd_parts_nb > 0)
291 part_type = "command line";
292 else
293 mtd_parts_nb = 0;
294 #endif
295 if (mtd_parts_nb == 0) {
296 if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
297 mtd_parts = partition_info_me;
298 else
299 mtd_parts = partition_info_hi;
300 mtd_parts_nb = NUM_PARTITIONS;
301 part_type = "static";
304 /* Register the partitions */
305 printk(KERN_NOTICE "Using %s partition definition\n", part_type);
306 add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
308 nand_evb_init:
309 /****************************
310 * EVB NAND (always present) *
311 ****************************/
312 /* Allocate memory for MTD device structure and private data */
313 ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
314 if (!ppchameleonevb_mtd) {
315 printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
316 if (ppchameleon_fio_base)
317 iounmap(ppchameleon_fio_base);
318 return -ENOMEM;
321 /* map physical address */
322 ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
323 if (!ppchameleonevb_fio_base) {
324 printk("ioremap PPChameleonEVB NAND flash failed\n");
325 kfree(ppchameleonevb_mtd);
326 if (ppchameleon_fio_base)
327 iounmap(ppchameleon_fio_base);
328 return -EIO;
331 /* Get pointer to private data */
332 this = (struct nand_chip *)(&ppchameleonevb_mtd[1]);
334 /* Initialize structures */
335 memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
336 memset(this, 0, sizeof(struct nand_chip));
338 /* Link the private data with the MTD structure */
339 ppchameleonevb_mtd->priv = this;
341 /* Initialize GPIOs */
342 /* Pin mapping for NAND chip */
344 CE GPIO_14
345 CLE GPIO_15
346 ALE GPIO_16
347 R/B GPIO_31
349 /* output select */
350 out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0);
351 out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF);
352 /* three-state select */
353 out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0);
354 out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF);
355 /* enable output driver */
356 out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN |
357 NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
358 #ifdef USE_READY_BUSY_PIN
359 /* three-state select */
360 out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC);
361 /* high-impedecence */
362 out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
363 /* input select */
364 out_be32((volatile unsigned *)GPIO0_ISR1L,
365 (in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
366 #endif
368 /* insert callbacks */
369 this->IO_ADDR_R = ppchameleonevb_fio_base;
370 this->IO_ADDR_W = ppchameleonevb_fio_base;
371 this->cmd_ctrl = ppchameleonevb_hwcontrol;
372 #ifdef USE_READY_BUSY_PIN
373 this->dev_ready = ppchameleonevb_device_ready;
374 #endif
375 this->chip_delay = NAND_SMALL_DELAY_US;
377 /* ECC mode */
378 this->ecc.mode = NAND_ECC_SOFT;
380 /* Scan to find existence of the device */
381 if (nand_scan(ppchameleonevb_mtd, 1)) {
382 iounmap((void *)ppchameleonevb_fio_base);
383 kfree(ppchameleonevb_mtd);
384 if (ppchameleon_fio_base)
385 iounmap(ppchameleon_fio_base);
386 return -ENXIO;
388 #ifdef CONFIG_MTD_PARTITIONS
389 ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
390 mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
391 if (mtd_parts_nb > 0)
392 part_type = "command line";
393 else
394 mtd_parts_nb = 0;
395 #endif
396 if (mtd_parts_nb == 0) {
397 mtd_parts = partition_info_evb;
398 mtd_parts_nb = NUM_PARTITIONS;
399 part_type = "static";
402 /* Register the partitions */
403 printk(KERN_NOTICE "Using %s partition definition\n", part_type);
404 add_mtd_partitions(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
406 /* Return happy */
407 return 0;
410 module_init(ppchameleonevb_init);
413 * Clean up routine
415 static void __exit ppchameleonevb_cleanup(void)
417 struct nand_chip *this;
419 /* Release resources, unregister device(s) */
420 nand_release(ppchameleon_mtd);
421 nand_release(ppchameleonevb_mtd);
423 /* Release iomaps */
424 this = (struct nand_chip *) &ppchameleon_mtd[1];
425 iounmap((void *) this->IO_ADDR_R);
426 this = (struct nand_chip *) &ppchameleonevb_mtd[1];
427 iounmap((void *) this->IO_ADDR_R);
429 /* Free the MTD device structure */
430 kfree (ppchameleon_mtd);
431 kfree (ppchameleonevb_mtd);
433 module_exit(ppchameleonevb_cleanup);
435 MODULE_LICENSE("GPL");
436 MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>");
437 MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");