rt2x00: Simplify rt2x00_check_rev
[linux/fpc-iii.git] / drivers / input / joystick / spaceorb.c
bloba694bf8e557bbca7ec84e2101a0e895a226f5d34
1 /*
2 * Copyright (c) 1999-2001 Vojtech Pavlik
4 * Based on the work of:
5 * David Thompson
6 */
8 /*
9 * SpaceTec SpaceOrb 360 and Avenger 6dof controller driver for Linux
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
27 * Should you need to contact me, the author, you can do so either by
28 * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
29 * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
32 #include <linux/kernel.h>
33 #include <linux/slab.h>
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/input.h>
37 #include <linux/serio.h>
39 #define DRIVER_DESC "SpaceTec SpaceOrb 360 and Avenger 6dof controller driver"
41 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
42 MODULE_DESCRIPTION(DRIVER_DESC);
43 MODULE_LICENSE("GPL");
46 * Constants.
49 #define SPACEORB_MAX_LENGTH 64
51 static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A };
52 static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ };
55 * Per-Orb data.
58 struct spaceorb {
59 struct input_dev *dev;
60 int idx;
61 unsigned char data[SPACEORB_MAX_LENGTH];
62 char phys[32];
65 static unsigned char spaceorb_xor[] = "SpaceWare";
67 static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive queue overflow", "Transmit queue timeout",
68 "Bad packet", "Power brown-out", "EEPROM checksum error", "Hardware fault" };
71 * spaceorb_process_packet() decodes packets the driver receives from the
72 * SpaceOrb.
75 static void spaceorb_process_packet(struct spaceorb *spaceorb)
77 struct input_dev *dev = spaceorb->dev;
78 unsigned char *data = spaceorb->data;
79 unsigned char c = 0;
80 int axes[6];
81 int i;
83 if (spaceorb->idx < 2) return;
84 for (i = 0; i < spaceorb->idx; i++) c ^= data[i];
85 if (c) return;
87 switch (data[0]) {
89 case 'R': /* Reset packet */
90 spaceorb->data[spaceorb->idx - 1] = 0;
91 for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++);
92 printk(KERN_INFO "input: %s [%s] is %s\n",
93 dev->name, spaceorb->data + i, spaceorb->phys);
94 break;
96 case 'D': /* Ball + button data */
97 if (spaceorb->idx != 12) return;
98 for (i = 0; i < 9; i++) spaceorb->data[i+2] ^= spaceorb_xor[i];
99 axes[0] = ( data[2] << 3) | (data[ 3] >> 4);
100 axes[1] = ((data[3] & 0x0f) << 6) | (data[ 4] >> 1);
101 axes[2] = ((data[4] & 0x01) << 9) | (data[ 5] << 2) | (data[4] >> 5);
102 axes[3] = ((data[6] & 0x1f) << 5) | (data[ 7] >> 2);
103 axes[4] = ((data[7] & 0x03) << 8) | (data[ 8] << 1) | (data[7] >> 6);
104 axes[5] = ((data[9] & 0x3f) << 4) | (data[10] >> 3);
105 for (i = 0; i < 6; i++)
106 input_report_abs(dev, spaceorb_axes[i], axes[i] - ((axes[i] & 0x200) ? 1024 : 0));
107 for (i = 0; i < 6; i++)
108 input_report_key(dev, spaceorb_buttons[i], (data[1] >> i) & 1);
109 break;
111 case 'K': /* Button data */
112 if (spaceorb->idx != 5) return;
113 for (i = 0; i < 6; i++)
114 input_report_key(dev, spaceorb_buttons[i], (data[2] >> i) & 1);
116 break;
118 case 'E': /* Error packet */
119 if (spaceorb->idx != 4) return;
120 printk(KERN_ERR "spaceorb: Device error. [ ");
121 for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]);
122 printk("]\n");
123 break;
126 input_sync(dev);
129 static irqreturn_t spaceorb_interrupt(struct serio *serio,
130 unsigned char data, unsigned int flags)
132 struct spaceorb* spaceorb = serio_get_drvdata(serio);
134 if (~data & 0x80) {
135 if (spaceorb->idx) spaceorb_process_packet(spaceorb);
136 spaceorb->idx = 0;
138 if (spaceorb->idx < SPACEORB_MAX_LENGTH)
139 spaceorb->data[spaceorb->idx++] = data & 0x7f;
140 return IRQ_HANDLED;
144 * spaceorb_disconnect() is the opposite of spaceorb_connect()
147 static void spaceorb_disconnect(struct serio *serio)
149 struct spaceorb* spaceorb = serio_get_drvdata(serio);
151 serio_close(serio);
152 serio_set_drvdata(serio, NULL);
153 input_unregister_device(spaceorb->dev);
154 kfree(spaceorb);
158 * spaceorb_connect() is the routine that is called when someone adds a
159 * new serio device that supports SpaceOrb/Avenger protocol and registers
160 * it as an input device.
163 static int spaceorb_connect(struct serio *serio, struct serio_driver *drv)
165 struct spaceorb *spaceorb;
166 struct input_dev *input_dev;
167 int err = -ENOMEM;
168 int i;
170 spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL);
171 input_dev = input_allocate_device();
172 if (!spaceorb || !input_dev)
173 goto fail1;
175 spaceorb->dev = input_dev;
176 snprintf(spaceorb->phys, sizeof(spaceorb->phys), "%s/input0", serio->phys);
178 input_dev->name = "SpaceTec SpaceOrb 360 / Avenger";
179 input_dev->phys = spaceorb->phys;
180 input_dev->id.bustype = BUS_RS232;
181 input_dev->id.vendor = SERIO_SPACEORB;
182 input_dev->id.product = 0x0001;
183 input_dev->id.version = 0x0100;
184 input_dev->dev.parent = &serio->dev;
186 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
188 for (i = 0; i < 6; i++)
189 set_bit(spaceorb_buttons[i], input_dev->keybit);
191 for (i = 0; i < 6; i++)
192 input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0);
194 serio_set_drvdata(serio, spaceorb);
196 err = serio_open(serio, drv);
197 if (err)
198 goto fail2;
200 err = input_register_device(spaceorb->dev);
201 if (err)
202 goto fail3;
204 return 0;
206 fail3: serio_close(serio);
207 fail2: serio_set_drvdata(serio, NULL);
208 fail1: input_free_device(input_dev);
209 kfree(spaceorb);
210 return err;
214 * The serio driver structure.
217 static struct serio_device_id spaceorb_serio_ids[] = {
219 .type = SERIO_RS232,
220 .proto = SERIO_SPACEORB,
221 .id = SERIO_ANY,
222 .extra = SERIO_ANY,
224 { 0 }
227 MODULE_DEVICE_TABLE(serio, spaceorb_serio_ids);
229 static struct serio_driver spaceorb_drv = {
230 .driver = {
231 .name = "spaceorb",
233 .description = DRIVER_DESC,
234 .id_table = spaceorb_serio_ids,
235 .interrupt = spaceorb_interrupt,
236 .connect = spaceorb_connect,
237 .disconnect = spaceorb_disconnect,
241 * The functions for inserting/removing us as a module.
244 static int __init spaceorb_init(void)
246 return serio_register_driver(&spaceorb_drv);
249 static void __exit spaceorb_exit(void)
251 serio_unregister_driver(&spaceorb_drv);
254 module_init(spaceorb_init);
255 module_exit(spaceorb_exit);