arch/blackfin/mm/isram-driver.c

   1 /*
   2  * Instruction SRAM accessor functions for the Blackfin
   3  *
   4  * Copyright 2008 Analog Devices Inc.
   5  *
   6  * Licensed under the GPL-2 or later
   7  */
   8
   9 #define pr_fmt(fmt) "isram: " fmt
  10
  11 #include <linux/module.h>
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/slab.h>
  15 #include <linux/spinlock.h>
  16 #include <linux/sched.h>
  17
  18 #include <asm/blackfin.h>
  19 #include <asm/dma.h>
  20
  21 /*
  22  * IMPORTANT WARNING ABOUT THESE FUNCTIONS
  23  *
  24  * The emulator will not function correctly if a write command is left in
  25  * ITEST_COMMAND or DTEST_COMMAND AND access to cache memory is needed by
  26  * the emulator. To avoid such problems, ensure that both ITEST_COMMAND
  27  * and DTEST_COMMAND are zero when exiting these functions.
  28  */
  29
  30
  31 /*
  32  * On the Blackfin, L1 instruction sram (which operates at core speeds) can not
  33  * be accessed by a normal core load, so we need to go through a few hoops to
  34  * read/write it.
  35  * To try to make it easier - we export a memcpy interface, where either src or
  36  * dest can be in this special L1 memory area.
  37  * The low level read/write functions should not be exposed to the rest of the
  38  * kernel, since they operate on 64-bit data, and need specific address alignment
  39  */
  40
  41 static DEFINE_SPINLOCK(dtest_lock);
  42
  43 /* Takes a void pointer */
  44 #define IADDR2DTEST(x) \
  45         ({ unsigned long __addr = (unsigned long)(x); \
  46                 ((__addr & (1 << 11)) << (26 - 11)) | /* addr bit 11 (Way0/Way1)   */ \
  47                 (1 << 24)                           | /* instruction access = 1    */ \
  48                 ((__addr & (1 << 15)) << (23 - 15)) | /* addr bit 15 (Data Bank)   */ \
  49                 ((__addr & (3 << 12)) << (16 - 12)) | /* addr bits 13:12 (Subbank) */ \
  50                 (__addr & 0x47F8)                   | /* addr bits 14 & 10:3       */ \
  51                 (1 << 2);                             /* data array = 1            */ \
  52         })
  53
  54 /* Takes a pointer, and returns the offset (in bits) which things should be shifted */
  55 #define ADDR2OFFSET(x) ((((unsigned long)(x)) & 0x7) * 8)
  56
  57 /* Takes a pointer, determines if it is the last byte in the isram 64-bit data type */
  58 #define ADDR2LAST(x) ((((unsigned long)x) & 0x7) == 0x7)
  59
  60 static void isram_write(const void *addr, uint64_t data)
  61 {
  62         uint32_t cmd;
  63         unsigned long flags;
  64
  65         if (unlikely(addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH)))
  66                 return;
  67
  68         cmd = IADDR2DTEST(addr) | 2;             /* write */
  69
  70         /*
  71          * Writes to DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
  72          * While in exception context - atomicity is guaranteed or double fault
  73          */
  74         spin_lock_irqsave(&dtest_lock, flags);
  75
  76         bfin_write_DTEST_DATA0(data & 0xFFFFFFFF);
  77         bfin_write_DTEST_DATA1(data >> 32);
  78
  79         /* use the builtin, since interrupts are already turned off */
  80         __builtin_bfin_csync();
  81         bfin_write_DTEST_COMMAND(cmd);
  82         __builtin_bfin_csync();
  83
  84         bfin_write_DTEST_COMMAND(0);
  85         __builtin_bfin_csync();
  86
  87         spin_unlock_irqrestore(&dtest_lock, flags);
  88 }
  89
  90 static uint64_t isram_read(const void *addr)
  91 {
  92         uint32_t cmd;
  93         unsigned long flags;
  94         uint64_t ret;
  95
  96         if (unlikely(addr > (void *)(L1_CODE_START + L1_CODE_LENGTH)))
  97                 return 0;
  98
  99         cmd = IADDR2DTEST(addr) | 0;              /* read */
 100
 101         /*
 102          * Reads of DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
 103          * While in exception context - atomicity is guaranteed or double fault
 104          */
 105         spin_lock_irqsave(&dtest_lock, flags);
 106         /* use the builtin, since interrupts are already turned off */
 107         __builtin_bfin_csync();
 108         bfin_write_DTEST_COMMAND(cmd);
 109         __builtin_bfin_csync();
 110         ret = bfin_read_DTEST_DATA0() | ((uint64_t)bfin_read_DTEST_DATA1() << 32);
 111
 112         bfin_write_DTEST_COMMAND(0);
 113         __builtin_bfin_csync();
 114         spin_unlock_irqrestore(&dtest_lock, flags);
 115
 116         return ret;
 117 }
 118
 119 static bool isram_check_addr(const void *addr, size_t n)
 120 {
 121         if ((addr >= (void *)L1_CODE_START) &&
 122             (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
 123                 if (unlikely((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
 124                         show_stack(NULL, NULL);
 125                         pr_err("copy involving %p length (%zu) too long\n", addr, n);
 126                 }
 127                 return true;
 128         }
 129         return false;
 130 }
 131
 132 /*
 133  * The isram_memcpy() function copies n bytes from memory area src to memory area dest.
 134  * The isram_memcpy() function returns a pointer to dest.
 135  * Either dest or src can be in L1 instruction sram.
 136  */
 137 void *isram_memcpy(void *dest, const void *src, size_t n)
 138 {
 139         uint64_t data_in = 0, data_out = 0;
 140         size_t count;
 141         bool dest_in_l1, src_in_l1, need_data, put_data;
 142         unsigned char byte, *src_byte, *dest_byte;
 143
 144         src_byte = (unsigned char *)src;
 145         dest_byte = (unsigned char *)dest;
 146
 147         dest_in_l1 = isram_check_addr(dest, n);
 148         src_in_l1 = isram_check_addr(src, n);
 149
 150         need_data = true;
 151         put_data = true;
 152         for (count = 0; count < n; count++) {
 153                 if (src_in_l1) {
 154                         if (need_data) {
 155                                 data_in = isram_read(src + count);
 156                                 need_data = false;
 157                         }
 158
 159                         if (ADDR2LAST(src + count))
 160                                 need_data = true;
 161
 162                         byte = (unsigned char)((data_in >> ADDR2OFFSET(src + count)) & 0xff);
 163
 164                 } else {
 165                         /* src is in L2 or L3 - so just dereference*/
 166                         byte = src_byte[count];
 167                 }
 168
 169                 if (dest_in_l1) {
 170                         if (put_data) {
 171                                 data_out = isram_read(dest + count);
 172                                 put_data = false;
 173                         }
 174
 175                         data_out &= ~((uint64_t)0xff << ADDR2OFFSET(dest + count));
 176                         data_out |= ((uint64_t)byte << ADDR2OFFSET(dest + count));
 177
 178                         if (ADDR2LAST(dest + count)) {
 179                                 put_data = true;
 180                                 isram_write(dest + count, data_out);
 181                         }
 182                 } else {
 183                         /* dest in L2 or L3 - so just dereference */
 184                         dest_byte[count] = byte;
 185                 }
 186         }
 187
 188         /* make sure we dump the last byte if necessary */
 189         if (dest_in_l1 && !put_data)
 190                 isram_write(dest + count, data_out);
 191
 192         return dest;
 193 }
 194 EXPORT_SYMBOL(isram_memcpy);
 195
 196 #ifdef CONFIG_BFIN_ISRAM_SELF_TEST
 197
 198 static int test_len = 0x20000;
 199
 200 static __init void hex_dump(unsigned char *buf, int len)
 201 {
 202         while (len--)
 203                 pr_cont("%02x", *buf++);
 204 }
 205
 206 static __init int isram_read_test(char *sdram, void *l1inst)
 207 {
 208         int i, ret = 0;
 209         uint64_t data1, data2;
 210
 211         pr_info("INFO: running isram_read tests\n");
 212
 213         /* setup some different data to play with */
 214         for (i = 0; i < test_len; ++i)
 215                 sdram[i] = i % 255;
 216         dma_memcpy(l1inst, sdram, test_len);
 217
 218         /* make sure we can read the L1 inst */
 219         for (i = 0; i < test_len; i += sizeof(uint64_t)) {
 220                 data1 = isram_read(l1inst + i);
 221                 memcpy(&data2, sdram + i, sizeof(data2));
 222                 if (data1 != data2) {
 223                         pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
 224                                 l1inst + i, data1, data2);
 225                         ++ret;
 226                 }
 227         }
 228
 229         return ret;
 230 }
 231
 232 static __init int isram_write_test(char *sdram, void *l1inst)
 233 {
 234         int i, ret = 0;
 235         uint64_t data1, data2;
 236
 237         pr_info("INFO: running isram_write tests\n");
 238
 239         /* setup some different data to play with */
 240         memset(sdram, 0, test_len * 2);
 241         dma_memcpy(l1inst, sdram, test_len);
 242         for (i = 0; i < test_len; ++i)
 243                 sdram[i] = i % 255;
 244
 245         /* make sure we can write the L1 inst */
 246         for (i = 0; i < test_len; i += sizeof(uint64_t)) {
 247                 memcpy(&data1, sdram + i, sizeof(data1));
 248                 isram_write(l1inst + i, data1);
 249                 data2 = isram_read(l1inst + i);
 250                 if (data1 != data2) {
 251                         pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
 252                                 l1inst + i, data1, data2);
 253                         ++ret;
 254                 }
 255         }
 256
 257         dma_memcpy(sdram + test_len, l1inst, test_len);
 258         if (memcmp(sdram, sdram + test_len, test_len)) {
 259                 pr_err("FAIL: isram_write() did not work properly\n");
 260                 ++ret;
 261         }
 262
 263         return ret;
 264 }
 265
 266 static __init int
 267 _isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
 268                    void *(*fmemcpy)(void *, const void *, size_t))
 269 {
 270         memset(sdram, pattern, test_len);
 271         fmemcpy(l1inst, sdram, test_len);
 272         fmemcpy(sdram + test_len, l1inst, test_len);
 273         if (memcmp(sdram, sdram + test_len, test_len)) {
 274                 pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
 275                         smemcpy, l1inst, sdram, test_len, pattern);
 276                 return 1;
 277         }
 278         return 0;
 279 }
 280 #define _isram_memcpy_test(a, b, c, d) _isram_memcpy_test(a, b, c, #d, d)
 281
 282 static __init int isram_memcpy_test(char *sdram, void *l1inst)
 283 {
 284         int i, j, thisret, ret = 0;
 285
 286         /* check broad isram_memcpy() */
 287         pr_info("INFO: running broad isram_memcpy tests\n");
 288         for (i = 0xf; i >= 0; --i)
 289                 ret += _isram_memcpy_test(i, sdram, l1inst, isram_memcpy);
 290
 291         /* check read of small, unaligned, and hardware 64bit limits */
 292         pr_info("INFO: running isram_memcpy (read) tests\n");
 293
 294         /* setup some different data to play with */
 295         for (i = 0; i < test_len; ++i)
 296                 sdram[i] = i % 255;
 297         dma_memcpy(l1inst, sdram, test_len);
 298
 299         thisret = 0;
 300         for (i = 0; i < test_len - 32; ++i) {
 301                 unsigned char cmp[32];
 302                 for (j = 1; j <= 32; ++j) {
 303                         memset(cmp, 0, sizeof(cmp));
 304                         isram_memcpy(cmp, l1inst + i, j);
 305                         if (memcmp(cmp, sdram + i, j)) {
 306                                 pr_err("FAIL: %p:", l1inst + 1);
 307                                 hex_dump(cmp, j);
 308                                 pr_cont(" SDRAM:");
 309                                 hex_dump(sdram + i, j);
 310                                 pr_cont("\n");
 311                                 if (++thisret > 20) {
 312                                         pr_err("FAIL: skipping remaining series\n");
 313                                         i = test_len;
 314                                         break;
 315                                 }
 316                         }
 317                 }
 318         }
 319         ret += thisret;
 320
 321         /* check write of small, unaligned, and hardware 64bit limits */
 322         pr_info("INFO: running isram_memcpy (write) tests\n");
 323
 324         memset(sdram + test_len, 0, test_len);
 325         dma_memcpy(l1inst, sdram + test_len, test_len);
 326
 327         thisret = 0;
 328         for (i = 0; i < test_len - 32; ++i) {
 329                 unsigned char cmp[32];
 330                 for (j = 1; j <= 32; ++j) {
 331                         isram_memcpy(l1inst + i, sdram + i, j);
 332                         dma_memcpy(cmp, l1inst + i, j);
 333                         if (memcmp(cmp, sdram + i, j)) {
 334                                 pr_err("FAIL: %p:", l1inst + i);
 335                                 hex_dump(cmp, j);
 336                                 pr_cont(" SDRAM:");
 337                                 hex_dump(sdram + i, j);
 338                                 pr_cont("\n");
 339                                 if (++thisret > 20) {
 340                                         pr_err("FAIL: skipping remaining series\n");
 341                                         i = test_len;
 342                                         break;
 343                                 }
 344                         }
 345                 }
 346         }
 347         ret += thisret;
 348
 349         return ret;
 350 }
 351
 352 static __init int isram_test_init(void)
 353 {
 354         int ret;
 355         char *sdram;
 356         void *l1inst;
 357
 358         /* Try to test as much of L1SRAM as possible */
 359         while (test_len) {
 360                 test_len >>= 1;
 361                 l1inst = l1_inst_sram_alloc(test_len);
 362                 if (l1inst)
 363                         break;
 364         }
 365         if (!l1inst) {
 366                 pr_warning("SKIP: could not allocate L1 inst\n");
 367                 return 0;
 368         }
 369         pr_info("INFO: testing %#x bytes (%p - %p)\n",
 370                 test_len, l1inst, l1inst + test_len);
 371
 372         sdram = kmalloc(test_len * 2, GFP_KERNEL);
 373         if (!sdram) {
 374                 sram_free(l1inst);
 375                 pr_warning("SKIP: could not allocate sdram\n");
 376                 return 0;
 377         }
 378
 379         /* sanity check initial L1 inst state */
 380         ret = 1;
 381         pr_info("INFO: running initial dma_memcpy checks %p\n", sdram);
 382         if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
 383                 goto abort;
 384         if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
 385                 goto abort;
 386
 387         ret = 0;
 388         ret += isram_read_test(sdram, l1inst);
 389         ret += isram_write_test(sdram, l1inst);
 390         ret += isram_memcpy_test(sdram, l1inst);
 391
 392  abort:
 393         sram_free(l1inst);
 394         kfree(sdram);
 395
 396         if (ret)
 397                 return -EIO;
 398
 399         pr_info("PASS: all tests worked !\n");
 400         return 0;
 401 }
 402 late_initcall(isram_test_init);
 403
 404 static __exit void isram_test_exit(void)
 405 {
 406         /* stub to allow unloading */
 407 }
 408 module_exit(isram_test_exit);
 409
 410 #endif