include/media/v4l2-common.h

   1 /*
   2     v4l2 common internal API header
   3
   4     This header contains internal shared ioctl definitions for use by the
   5     internal low-level v4l2 drivers.
   6     Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal
   7     define,
   8
   9     Copyright (C) 2005  Hans Verkuil <hverkuil@xs4all.nl>
  10
  11     This program is free software; you can redistribute it and/or modify
  12     it under the terms of the GNU General Public License as published by
  13     the Free Software Foundation; either version 2 of the License, or
  14     (at your option) any later version.
  15
  16     This program is distributed in the hope that it will be useful,
  17     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19     GNU General Public License for more details.
  20
  21     You should have received a copy of the GNU General Public License
  22     along with this program; if not, write to the Free Software
  23     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  24  */
  25
  26 #ifndef V4L2_COMMON_H_
  27 #define V4L2_COMMON_H_
  28
  29 #include <media/v4l2-dev.h>
  30
  31 /* Common printk constructs for v4l-i2c drivers. These macros create a unique
  32    prefix consisting of the driver name, the adapter number and the i2c
  33    address. */
  34 #define v4l_printk(level, name, adapter, addr, fmt, arg...) \
  35         printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
  36
  37 #define v4l_client_printk(level, client, fmt, arg...)                       \
  38         v4l_printk(level, (client)->dev.driver->name, (client)->adapter, \
  39                    (client)->addr, fmt , ## arg)
  40
  41 #define v4l_err(client, fmt, arg...) \
  42         v4l_client_printk(KERN_ERR, client, fmt , ## arg)
  43
  44 #define v4l_warn(client, fmt, arg...) \
  45         v4l_client_printk(KERN_WARNING, client, fmt , ## arg)
  46
  47 #define v4l_info(client, fmt, arg...) \
  48         v4l_client_printk(KERN_INFO, client, fmt , ## arg)
  49
  50 /* These three macros assume that the debug level is set with a module
  51    parameter called 'debug'. */
  52 #define v4l_dbg(level, debug, client, fmt, arg...)                           \
  53         do {                                                                 \
  54                 if (debug >= (level))                                        \
  55                         v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
  56         } while (0)
  57
  58 /* Add a version of v4l_dbg to be used on drivers using dev_foo() macros */
  59 #define dev_dbg_lvl(__dev, __level, __debug, __fmt, __arg...)           \
  60         do {                                                            \
  61                 if (__debug >= (__level))                               \
  62                         dev_printk(KERN_DEBUG, __dev, __fmt, ##__arg);  \
  63         } while (0)
  64
  65 /* ------------------------------------------------------------------------- */
  66
  67 /* These printk constructs can be used with v4l2_device and v4l2_subdev */
  68 #define v4l2_printk(level, dev, fmt, arg...) \
  69         printk(level "%s: " fmt, (dev)->name , ## arg)
  70
  71 #define v4l2_err(dev, fmt, arg...) \
  72         v4l2_printk(KERN_ERR, dev, fmt , ## arg)
  73
  74 #define v4l2_warn(dev, fmt, arg...) \
  75         v4l2_printk(KERN_WARNING, dev, fmt , ## arg)
  76
  77 #define v4l2_info(dev, fmt, arg...) \
  78         v4l2_printk(KERN_INFO, dev, fmt , ## arg)
  79
  80 /* These three macros assume that the debug level is set with a module
  81    parameter called 'debug'. */
  82 #define v4l2_dbg(level, debug, dev, fmt, arg...)                        \
  83         do {                                                            \
  84                 if (debug >= (level))                                   \
  85                         v4l2_printk(KERN_DEBUG, dev, fmt , ## arg);     \
  86         } while (0)
  87
  88 /**
  89  * v4l2_ctrl_query_fill- Fill in a struct v4l2_queryctrl
  90  *
  91  * @qctrl: pointer to the &struct v4l2_queryctrl to be filled
  92  * @min: minimum value for the control
  93  * @max: maximum value for the control
  94  * @step: control step
  95  * @def: default value for the control
  96  *
  97  * Fills the &struct v4l2_queryctrl fields for the query control.
  98  *
  99  * .. note::
 100  *
 101  *    This function assumes that the @qctrl->id field is filled.
 102  *
 103  * Returns -EINVAL if the control is not known by the V4L2 core, 0 on success.
 104  */
 105
 106 int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl,
 107                          s32 min, s32 max, s32 step, s32 def);
 108
 109 /* ------------------------------------------------------------------------- */
 110
 111 /* I2C Helper functions */
 112
 113 struct i2c_driver;
 114 struct i2c_adapter;
 115 struct i2c_client;
 116 struct i2c_device_id;
 117 struct v4l2_device;
 118 struct v4l2_subdev;
 119 struct v4l2_subdev_ops;
 120
 121 /**
 122  * v4l2_i2c_new_subdev - Load an i2c module and return an initialized
 123  *      &struct v4l2_subdev.
 124  *
 125  * @v4l2_dev: pointer to &struct v4l2_device
 126  * @adapter: pointer to struct i2c_adapter
 127  * @client_type:  name of the chip that's on the adapter.
 128  * @addr: I2C address. If zero, it will use @probe_addrs
 129  * @probe_addrs: array with a list of address. The last entry at such
 130  *      array should be %I2C_CLIENT_END.
 131  *
 132  * returns a &struct v4l2_subdev pointer.
 133  */
 134 struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
 135                 struct i2c_adapter *adapter, const char *client_type,
 136                 u8 addr, const unsigned short *probe_addrs);
 137
 138 struct i2c_board_info;
 139
 140 /**
 141  * v4l2_i2c_new_subdev_board - Load an i2c module and return an initialized
 142  *      &struct v4l2_subdev.
 143  *
 144  * @v4l2_dev: pointer to &struct v4l2_device
 145  * @adapter: pointer to struct i2c_adapter
 146  * @info: pointer to struct i2c_board_info used to replace the irq,
 147  *       platform_data and addr arguments.
 148  * @probe_addrs: array with a list of address. The last entry at such
 149  *      array should be %I2C_CLIENT_END.
 150  *
 151  * returns a &struct v4l2_subdev pointer.
 152  */
 153 struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
 154                 struct i2c_adapter *adapter, struct i2c_board_info *info,
 155                 const unsigned short *probe_addrs);
 156
 157 /**
 158  * v4l2_i2c_subdev_init - Initializes a &struct v4l2_subdev with data from
 159  *      an i2c_client struct.
 160  *
 161  * @sd: pointer to &struct v4l2_subdev
 162  * @client: pointer to struct i2c_client
 163  * @ops: pointer to &struct v4l2_subdev_ops
 164  */
 165 void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
 166                 const struct v4l2_subdev_ops *ops);
 167
 168 /**
 169  * v4l2_i2c_subdev_addr - returns i2c client address of &struct v4l2_subdev.
 170  *
 171  * @sd: pointer to &struct v4l2_subdev
 172  *
 173  * Returns the address of an I2C sub-device
 174  */
 175 unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd);
 176
 177 /**
 178  * enum v4l2_i2c_tuner_type - specifies the range of tuner address that
 179  *      should be used when seeking for I2C devices.
 180  *
 181  * @ADDRS_RADIO:                Radio tuner addresses.
 182  *                              Represent the following I2C addresses:
 183  *                              0x10 (if compiled with tea5761 support)
 184  *                              and 0x60.
 185  * @ADDRS_DEMOD:                Demod tuner addresses.
 186  *                              Represent the following I2C addresses:
 187  *                              0x42, 0x43, 0x4a and 0x4b.
 188  * @ADDRS_TV:                   TV tuner addresses.
 189  *                              Represent the following I2C addresses:
 190  *                              0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62,
 191  *                              0x63 and 0x64.
 192  * @ADDRS_TV_WITH_DEMOD:        TV tuner addresses if demod is present, this
 193  *                              excludes addresses used by the demodulator
 194  *                              from the list of candidates.
 195  *                              Represent the following I2C addresses:
 196  *                              0x60, 0x61, 0x62, 0x63 and 0x64.
 197  *
 198  * NOTE: All I2C addresses above use the 7-bit notation.
 199  */
 200 enum v4l2_i2c_tuner_type {
 201         ADDRS_RADIO,
 202         ADDRS_DEMOD,
 203         ADDRS_TV,
 204         ADDRS_TV_WITH_DEMOD,
 205 };
 206 /**
 207  * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe.
 208  *
 209  * @type: type of the tuner to seek, as defined by
 210  *        &enum v4l2_i2c_tuner_type.
 211  *
 212  * NOTE: Use only if the tuner addresses are unknown.
 213  */
 214 const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type);
 215
 216 /* ------------------------------------------------------------------------- */
 217
 218 /* SPI Helper functions */
 219 #if defined(CONFIG_SPI)
 220
 221 #include <linux/spi/spi.h>
 222
 223 struct spi_device;
 224
 225 /**
 226  *  v4l2_spi_new_subdev - Load an spi module and return an initialized
 227  *      &struct v4l2_subdev.
 228  *
 229  *
 230  * @v4l2_dev: pointer to &struct v4l2_device.
 231  * @master: pointer to struct spi_master.
 232  * @info: pointer to struct spi_board_info.
 233  *
 234  * returns a &struct v4l2_subdev pointer.
 235  */
 236 struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
 237                 struct spi_master *master, struct spi_board_info *info);
 238
 239 /**
 240  * v4l2_spi_subdev_init - Initialize a v4l2_subdev with data from an
 241  *      spi_device struct.
 242  *
 243  * @sd: pointer to &struct v4l2_subdev
 244  * @spi: pointer to struct spi_device.
 245  * @ops: pointer to &struct v4l2_subdev_ops
 246  */
 247 void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
 248                 const struct v4l2_subdev_ops *ops);
 249 #endif
 250
 251 /* ------------------------------------------------------------------------- */
 252
 253 /*
 254  * FIXME: these remaining ioctls/structs should be removed as well, but they
 255  * are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET).
 256  * To remove these ioctls some more cleanup is needed in those modules.
 257  *
 258  * It doesn't make much sense on documenting them, as what we really want is
 259  * to get rid of them.
 260  */
 261
 262 /* s_config */
 263 struct v4l2_priv_tun_config {
 264         int tuner;
 265         void *priv;
 266 };
 267 #define TUNER_SET_CONFIG           _IOW('d', 92, struct v4l2_priv_tun_config)
 268
 269 #define VIDIOC_INT_RESET                _IOW ('d', 102, u32)
 270
 271 /* ------------------------------------------------------------------------- */
 272
 273 /* Miscellaneous helper functions */
 274
 275 /**
 276  * v4l_bound_align_image - adjust video dimensions according to
 277  *      a given constraints.
 278  *
 279  * @width:      pointer to width that will be adjusted if needed.
 280  * @wmin:       minimum width.
 281  * @wmax:       maximum width.
 282  * @walign:     least significant bit on width.
 283  * @height:     pointer to height that will be adjusted if needed.
 284  * @hmin:       minimum height.
 285  * @hmax:       maximum height.
 286  * @halign:     least significant bit on width.
 287  * @salign:     least significant bit for the image size (e. g.
 288  *              :math:`width * height`).
 289  *
 290  * Clip an image to have @width between @wmin and @wmax, and @height between
 291  * @hmin and @hmax, inclusive.
 292  *
 293  * Additionally, the @width will be a multiple of :math:`2^{walign}`,
 294  * the @height will be a multiple of :math:`2^{halign}`, and the overall
 295  * size :math:`width * height` will be a multiple of :math:`2^{salign}`.
 296  *
 297  * .. note::
 298  *
 299  *    #. The clipping rectangle may be shrunk or enlarged to fit the alignment
 300  *       constraints.
 301  *    #. @wmax must not be smaller than @wmin.
 302  *    #. @hmax must not be smaller than @hmin.
 303  *    #. The alignments must not be so high there are no possible image
 304  *       sizes within the allowed bounds.
 305  *    #. @wmin and @hmin must be at least 1 (don't use 0).
 306  *    #. For @walign, @halign and @salign, if you don't care about a certain
 307  *       alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment
 308  *       is equivalent to no alignment.
 309  *    #. If you only want to adjust downward, specify a maximum that's the
 310  *       same as the initial value.
 311  */
 312 void v4l_bound_align_image(unsigned int *width, unsigned int wmin,
 313                            unsigned int wmax, unsigned int walign,
 314                            unsigned int *height, unsigned int hmin,
 315                            unsigned int hmax, unsigned int halign,
 316                            unsigned int salign);
 317
 318 /**
 319  * v4l2_find_nearest_size - Find the nearest size among a discrete
 320  *      set of resolutions contained in an array of a driver specific struct.
 321  *
 322  * @array: a driver specific array of image sizes
 323  * @array_size: the length of the driver specific array of image sizes
 324  * @width_field: the name of the width field in the driver specific struct
 325  * @height_field: the name of the height field in the driver specific struct
 326  * @width: desired width.
 327  * @height: desired height.
 328  *
 329  * Finds the closest resolution to minimize the width and height differences
 330  * between what requested and the supported resolutions. The size of the width
 331  * and height fields in the driver specific must equal to that of u32, i.e. four
 332  * bytes.
 333  *
 334  * Returns the best match or NULL if the length of the array is zero.
 335  */
 336 #define v4l2_find_nearest_size(array, array_size, width_field, height_field, \
 337                                width, height)                           \
 338         ({                                                              \
 339                 BUILD_BUG_ON(sizeof((array)->width_field) != sizeof(u32) || \
 340                              sizeof((array)->height_field) != sizeof(u32)); \
 341                 (typeof(&(*(array))))__v4l2_find_nearest_size(          \
 342                         (array), array_size, sizeof(*(array)),          \
 343                         offsetof(typeof(*(array)), width_field),        \
 344                         offsetof(typeof(*(array)), height_field),       \
 345                         width, height);                                 \
 346         })
 347 const void *
 348 __v4l2_find_nearest_size(const void *array, size_t array_size,
 349                          size_t entry_size, size_t width_offset,
 350                          size_t height_offset, s32 width, s32 height);
 351
 352 /**
 353  * v4l2_get_timestamp - helper routine to get a timestamp to be used when
 354  *      filling streaming metadata. Internally, it uses ktime_get_ts(),
 355  *      which is the recommended way to get it.
 356  *
 357  * @tv: pointer to &struct timeval to be filled.
 358  */
 359 void v4l2_get_timestamp(struct timeval *tv);
 360
 361 /**
 362  * v4l2_g_parm_cap - helper routine for vidioc_g_parm to fill this in by
 363  *      calling the g_frame_interval op of the given subdev. It only works
 364  *      for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the
 365  *      function name.
 366  *
 367  * @vdev: the struct video_device pointer. Used to determine the device caps.
 368  * @sd: the sub-device pointer.
 369  * @a: the VIDIOC_G_PARM argument.
 370  */
 371 int v4l2_g_parm_cap(struct video_device *vdev,
 372                     struct v4l2_subdev *sd, struct v4l2_streamparm *a);
 373
 374 /**
 375  * v4l2_s_parm_cap - helper routine for vidioc_s_parm to fill this in by
 376  *      calling the s_frame_interval op of the given subdev. It only works
 377  *      for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the
 378  *      function name.
 379  *
 380  * @vdev: the struct video_device pointer. Used to determine the device caps.
 381  * @sd: the sub-device pointer.
 382  * @a: the VIDIOC_S_PARM argument.
 383  */
 384 int v4l2_s_parm_cap(struct video_device *vdev,
 385                     struct v4l2_subdev *sd, struct v4l2_streamparm *a);
 386
 387 #endif /* V4L2_COMMON_H_ */