2 * originally based on the dummy device.
4 * Copyright 1999, Thomas Davis, tadavis@lbl.gov.
5 * Licensed under the GPL. Based on dummy.c, and eql.c devices.
7 * bonding.c: an Ethernet Bonding driver
9 * This is useful to talk to a Cisco EtherChannel compatible equipment:
11 * Sun Trunking (Solaris)
12 * Alteon AceDirector Trunks
14 * and probably many L2 switches ...
17 * ifconfig bond0 ipaddress netmask up
18 * will setup a network device, with an ip address. No mac address
19 * will be assigned at this time. The hw mac address will come from
20 * the first slave bonded to the channel. All slaves will then use
21 * this hw mac address.
24 * will release all slaves, marking them as down.
26 * ifenslave bond0 eth0
27 * will attach eth0 to bond0 as a slave. eth0 hw mac address will either
28 * a: be used as initial mac address
29 * b: if a hw mac address already is there, eth0's hw mac address
30 * will then be set from bond0.
34 #include <linux/kernel.h>
35 #include <linux/module.h>
36 #include <linux/types.h>
37 #include <linux/fcntl.h>
38 #include <linux/interrupt.h>
39 #include <linux/ptrace.h>
40 #include <linux/ioport.h>
44 #include <linux/tcp.h>
45 #include <linux/udp.h>
46 #include <linux/slab.h>
47 #include <linux/string.h>
48 #include <linux/init.h>
49 #include <linux/timer.h>
50 #include <linux/socket.h>
51 #include <linux/ctype.h>
52 #include <linux/inet.h>
53 #include <linux/bitops.h>
56 #include <linux/uaccess.h>
57 #include <linux/errno.h>
58 #include <linux/netdevice.h>
59 #include <linux/inetdevice.h>
60 #include <linux/igmp.h>
61 #include <linux/etherdevice.h>
62 #include <linux/skbuff.h>
64 #include <linux/rtnetlink.h>
65 #include <linux/smp.h>
66 #include <linux/if_ether.h>
68 #include <linux/mii.h>
69 #include <linux/ethtool.h>
70 #include <linux/if_vlan.h>
71 #include <linux/if_bonding.h>
72 #include <linux/jiffies.h>
73 #include <linux/preempt.h>
74 #include <net/route.h>
75 #include <net/net_namespace.h>
76 #include <net/netns/generic.h>
77 #include <net/pkt_sched.h>
78 #include <linux/rculist.h>
79 #include <net/flow_dissector.h>
80 #include <net/switchdev.h>
81 #include <net/bonding.h>
82 #include <net/bond_3ad.h>
83 #include <net/bond_alb.h>
85 #include "bonding_priv.h"
87 /*---------------------------- Module parameters ----------------------------*/
89 /* monitor all links that often (in milliseconds). <=0 disables monitoring */
91 static int max_bonds
= BOND_DEFAULT_MAX_BONDS
;
92 static int tx_queues
= BOND_DEFAULT_TX_QUEUES
;
93 static int num_peer_notif
= 1;
97 static int use_carrier
= 1;
100 static char *primary_reselect
;
101 static char *lacp_rate
;
102 static int min_links
;
103 static char *ad_select
;
104 static char *xmit_hash_policy
;
105 static int arp_interval
;
106 static char *arp_ip_target
[BOND_MAX_ARP_TARGETS
];
107 static char *arp_validate
;
108 static char *arp_all_targets
;
109 static char *fail_over_mac
;
110 static int all_slaves_active
;
111 static struct bond_params bonding_defaults
;
112 static int resend_igmp
= BOND_DEFAULT_RESEND_IGMP
;
113 static int packets_per_slave
= 1;
114 static int lp_interval
= BOND_ALB_DEFAULT_LP_INTERVAL
;
116 module_param(max_bonds
, int, 0);
117 MODULE_PARM_DESC(max_bonds
, "Max number of bonded devices");
118 module_param(tx_queues
, int, 0);
119 MODULE_PARM_DESC(tx_queues
, "Max number of transmit queues (default = 16)");
120 module_param_named(num_grat_arp
, num_peer_notif
, int, 0644);
121 MODULE_PARM_DESC(num_grat_arp
, "Number of peer notifications to send on "
122 "failover event (alias of num_unsol_na)");
123 module_param_named(num_unsol_na
, num_peer_notif
, int, 0644);
124 MODULE_PARM_DESC(num_unsol_na
, "Number of peer notifications to send on "
125 "failover event (alias of num_grat_arp)");
126 module_param(miimon
, int, 0);
127 MODULE_PARM_DESC(miimon
, "Link check interval in milliseconds");
128 module_param(updelay
, int, 0);
129 MODULE_PARM_DESC(updelay
, "Delay before considering link up, in milliseconds");
130 module_param(downdelay
, int, 0);
131 MODULE_PARM_DESC(downdelay
, "Delay before considering link down, "
133 module_param(use_carrier
, int, 0);
134 MODULE_PARM_DESC(use_carrier
, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
135 "0 for off, 1 for on (default)");
136 module_param(mode
, charp
, 0);
137 MODULE_PARM_DESC(mode
, "Mode of operation; 0 for balance-rr, "
138 "1 for active-backup, 2 for balance-xor, "
139 "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
140 "6 for balance-alb");
141 module_param(primary
, charp
, 0);
142 MODULE_PARM_DESC(primary
, "Primary network device to use");
143 module_param(primary_reselect
, charp
, 0);
144 MODULE_PARM_DESC(primary_reselect
, "Reselect primary slave "
146 "0 for always (default), "
147 "1 for only if speed of primary is "
149 "2 for only on active slave "
151 module_param(lacp_rate
, charp
, 0);
152 MODULE_PARM_DESC(lacp_rate
, "LACPDU tx rate to request from 802.3ad partner; "
153 "0 for slow, 1 for fast");
154 module_param(ad_select
, charp
, 0);
155 MODULE_PARM_DESC(ad_select
, "802.3ad aggregation selection logic; "
156 "0 for stable (default), 1 for bandwidth, "
158 module_param(min_links
, int, 0);
159 MODULE_PARM_DESC(min_links
, "Minimum number of available links before turning on carrier");
161 module_param(xmit_hash_policy
, charp
, 0);
162 MODULE_PARM_DESC(xmit_hash_policy
, "balance-xor and 802.3ad hashing method; "
163 "0 for layer 2 (default), 1 for layer 3+4, "
164 "2 for layer 2+3, 3 for encap layer 2+3, "
165 "4 for encap layer 3+4");
166 module_param(arp_interval
, int, 0);
167 MODULE_PARM_DESC(arp_interval
, "arp interval in milliseconds");
168 module_param_array(arp_ip_target
, charp
, NULL
, 0);
169 MODULE_PARM_DESC(arp_ip_target
, "arp targets in n.n.n.n form");
170 module_param(arp_validate
, charp
, 0);
171 MODULE_PARM_DESC(arp_validate
, "validate src/dst of ARP probes; "
172 "0 for none (default), 1 for active, "
173 "2 for backup, 3 for all");
174 module_param(arp_all_targets
, charp
, 0);
175 MODULE_PARM_DESC(arp_all_targets
, "fail on any/all arp targets timeout; 0 for any (default), 1 for all");
176 module_param(fail_over_mac
, charp
, 0);
177 MODULE_PARM_DESC(fail_over_mac
, "For active-backup, do not set all slaves to "
178 "the same MAC; 0 for none (default), "
179 "1 for active, 2 for follow");
180 module_param(all_slaves_active
, int, 0);
181 MODULE_PARM_DESC(all_slaves_active
, "Keep all frames received on an interface "
182 "by setting active flag for all slaves; "
183 "0 for never (default), 1 for always.");
184 module_param(resend_igmp
, int, 0);
185 MODULE_PARM_DESC(resend_igmp
, "Number of IGMP membership reports to send on "
187 module_param(packets_per_slave
, int, 0);
188 MODULE_PARM_DESC(packets_per_slave
, "Packets to send per slave in balance-rr "
189 "mode; 0 for a random slave, 1 packet per "
190 "slave (default), >1 packets per slave.");
191 module_param(lp_interval
, uint
, 0);
192 MODULE_PARM_DESC(lp_interval
, "The number of seconds between instances where "
193 "the bonding driver sends learning packets to "
194 "each slaves peer switch. The default is 1.");
196 /*----------------------------- Global variables ----------------------------*/
198 #ifdef CONFIG_NET_POLL_CONTROLLER
199 atomic_t netpoll_block_tx
= ATOMIC_INIT(0);
202 int bond_net_id __read_mostly
;
204 static __be32 arp_target
[BOND_MAX_ARP_TARGETS
];
205 static int arp_ip_count
;
206 static int bond_mode
= BOND_MODE_ROUNDROBIN
;
207 static int xmit_hashtype
= BOND_XMIT_POLICY_LAYER2
;
208 static int lacp_fast
;
210 /*-------------------------- Forward declarations ---------------------------*/
212 static int bond_init(struct net_device
*bond_dev
);
213 static void bond_uninit(struct net_device
*bond_dev
);
214 static struct rtnl_link_stats64
*bond_get_stats(struct net_device
*bond_dev
,
215 struct rtnl_link_stats64
*stats
);
216 static void bond_slave_arr_handler(struct work_struct
*work
);
217 static bool bond_time_in_interval(struct bonding
*bond
, unsigned long last_act
,
220 /*---------------------------- General routines -----------------------------*/
222 const char *bond_mode_name(int mode
)
224 static const char *names
[] = {
225 [BOND_MODE_ROUNDROBIN
] = "load balancing (round-robin)",
226 [BOND_MODE_ACTIVEBACKUP
] = "fault-tolerance (active-backup)",
227 [BOND_MODE_XOR
] = "load balancing (xor)",
228 [BOND_MODE_BROADCAST
] = "fault-tolerance (broadcast)",
229 [BOND_MODE_8023AD
] = "IEEE 802.3ad Dynamic link aggregation",
230 [BOND_MODE_TLB
] = "transmit load balancing",
231 [BOND_MODE_ALB
] = "adaptive load balancing",
234 if (mode
< BOND_MODE_ROUNDROBIN
|| mode
> BOND_MODE_ALB
)
240 /*---------------------------------- VLAN -----------------------------------*/
243 * bond_dev_queue_xmit - Prepare skb for xmit.
245 * @bond: bond device that got this skb for tx.
246 * @skb: hw accel VLAN tagged skb to transmit
247 * @slave_dev: slave that is supposed to xmit this skbuff
249 void bond_dev_queue_xmit(struct bonding
*bond
, struct sk_buff
*skb
,
250 struct net_device
*slave_dev
)
252 skb
->dev
= slave_dev
;
254 BUILD_BUG_ON(sizeof(skb
->queue_mapping
) !=
255 sizeof(qdisc_skb_cb(skb
)->slave_dev_queue_mapping
));
256 skb
->queue_mapping
= qdisc_skb_cb(skb
)->slave_dev_queue_mapping
;
258 if (unlikely(netpoll_tx_running(bond
->dev
)))
259 bond_netpoll_send_skb(bond_get_slave_by_dev(bond
, slave_dev
), skb
);
264 /* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
265 * We don't protect the slave list iteration with a lock because:
266 * a. This operation is performed in IOCTL context,
267 * b. The operation is protected by the RTNL semaphore in the 8021q code,
268 * c. Holding a lock with BH disabled while directly calling a base driver
269 * entry point is generally a BAD idea.
271 * The design of synchronization/protection for this operation in the 8021q
272 * module is good for one or more VLAN devices over a single physical device
273 * and cannot be extended for a teaming solution like bonding, so there is a
274 * potential race condition here where a net device from the vlan group might
275 * be referenced (either by a base driver or the 8021q code) while it is being
276 * removed from the system. However, it turns out we're not making matters
277 * worse, and if it works for regular VLAN usage it will work here too.
281 * bond_vlan_rx_add_vid - Propagates adding an id to slaves
282 * @bond_dev: bonding net device that got called
283 * @vid: vlan id being added
285 static int bond_vlan_rx_add_vid(struct net_device
*bond_dev
,
286 __be16 proto
, u16 vid
)
288 struct bonding
*bond
= netdev_priv(bond_dev
);
289 struct slave
*slave
, *rollback_slave
;
290 struct list_head
*iter
;
293 bond_for_each_slave(bond
, slave
, iter
) {
294 res
= vlan_vid_add(slave
->dev
, proto
, vid
);
302 /* unwind to the slave that failed */
303 bond_for_each_slave(bond
, rollback_slave
, iter
) {
304 if (rollback_slave
== slave
)
307 vlan_vid_del(rollback_slave
->dev
, proto
, vid
);
314 * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
315 * @bond_dev: bonding net device that got called
316 * @vid: vlan id being removed
318 static int bond_vlan_rx_kill_vid(struct net_device
*bond_dev
,
319 __be16 proto
, u16 vid
)
321 struct bonding
*bond
= netdev_priv(bond_dev
);
322 struct list_head
*iter
;
325 bond_for_each_slave(bond
, slave
, iter
)
326 vlan_vid_del(slave
->dev
, proto
, vid
);
328 if (bond_is_lb(bond
))
329 bond_alb_clear_vlan(bond
, vid
);
334 /*------------------------------- Link status -------------------------------*/
336 /* Set the carrier state for the master according to the state of its
337 * slaves. If any slaves are up, the master is up. In 802.3ad mode,
338 * do special 802.3ad magic.
340 * Returns zero if carrier state does not change, nonzero if it does.
342 int bond_set_carrier(struct bonding
*bond
)
344 struct list_head
*iter
;
347 if (!bond_has_slaves(bond
))
350 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
351 return bond_3ad_set_carrier(bond
);
353 bond_for_each_slave(bond
, slave
, iter
) {
354 if (slave
->link
== BOND_LINK_UP
) {
355 if (!netif_carrier_ok(bond
->dev
)) {
356 netif_carrier_on(bond
->dev
);
364 if (netif_carrier_ok(bond
->dev
)) {
365 netif_carrier_off(bond
->dev
);
371 /* Get link speed and duplex from the slave's base driver
372 * using ethtool. If for some reason the call fails or the
373 * values are invalid, set speed and duplex to -1,
376 static void bond_update_speed_duplex(struct slave
*slave
)
378 struct net_device
*slave_dev
= slave
->dev
;
379 struct ethtool_link_ksettings ecmd
;
382 slave
->speed
= SPEED_UNKNOWN
;
383 slave
->duplex
= DUPLEX_UNKNOWN
;
385 res
= __ethtool_get_link_ksettings(slave_dev
, &ecmd
);
389 if (ecmd
.base
.speed
== 0 || ecmd
.base
.speed
== ((__u32
)-1))
392 switch (ecmd
.base
.duplex
) {
400 slave
->speed
= ecmd
.base
.speed
;
401 slave
->duplex
= ecmd
.base
.duplex
;
406 const char *bond_slave_link_status(s8 link
)
422 /* if <dev> supports MII link status reporting, check its link status.
424 * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
425 * depending upon the setting of the use_carrier parameter.
427 * Return either BMSR_LSTATUS, meaning that the link is up (or we
428 * can't tell and just pretend it is), or 0, meaning that the link is
431 * If reporting is non-zero, instead of faking link up, return -1 if
432 * both ETHTOOL and MII ioctls fail (meaning the device does not
433 * support them). If use_carrier is set, return whatever it says.
434 * It'd be nice if there was a good way to tell if a driver supports
435 * netif_carrier, but there really isn't.
437 static int bond_check_dev_link(struct bonding
*bond
,
438 struct net_device
*slave_dev
, int reporting
)
440 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
441 int (*ioctl
)(struct net_device
*, struct ifreq
*, int);
443 struct mii_ioctl_data
*mii
;
445 if (!reporting
&& !netif_running(slave_dev
))
448 if (bond
->params
.use_carrier
)
449 return netif_carrier_ok(slave_dev
) ? BMSR_LSTATUS
: 0;
451 /* Try to get link status using Ethtool first. */
452 if (slave_dev
->ethtool_ops
->get_link
)
453 return slave_dev
->ethtool_ops
->get_link(slave_dev
) ?
456 /* Ethtool can't be used, fallback to MII ioctls. */
457 ioctl
= slave_ops
->ndo_do_ioctl
;
459 /* TODO: set pointer to correct ioctl on a per team member
460 * bases to make this more efficient. that is, once
461 * we determine the correct ioctl, we will always
462 * call it and not the others for that team
466 /* We cannot assume that SIOCGMIIPHY will also read a
467 * register; not all network drivers (e.g., e100)
471 /* Yes, the mii is overlaid on the ifreq.ifr_ifru */
472 strncpy(ifr
.ifr_name
, slave_dev
->name
, IFNAMSIZ
);
474 if (ioctl(slave_dev
, &ifr
, SIOCGMIIPHY
) == 0) {
475 mii
->reg_num
= MII_BMSR
;
476 if (ioctl(slave_dev
, &ifr
, SIOCGMIIREG
) == 0)
477 return mii
->val_out
& BMSR_LSTATUS
;
481 /* If reporting, report that either there's no dev->do_ioctl,
482 * or both SIOCGMIIREG and get_link failed (meaning that we
483 * cannot report link status). If not reporting, pretend
486 return reporting
? -1 : BMSR_LSTATUS
;
489 /*----------------------------- Multicast list ------------------------------*/
491 /* Push the promiscuity flag down to appropriate slaves */
492 static int bond_set_promiscuity(struct bonding
*bond
, int inc
)
494 struct list_head
*iter
;
497 if (bond_uses_primary(bond
)) {
498 struct slave
*curr_active
= rtnl_dereference(bond
->curr_active_slave
);
501 err
= dev_set_promiscuity(curr_active
->dev
, inc
);
505 bond_for_each_slave(bond
, slave
, iter
) {
506 err
= dev_set_promiscuity(slave
->dev
, inc
);
514 /* Push the allmulti flag down to all slaves */
515 static int bond_set_allmulti(struct bonding
*bond
, int inc
)
517 struct list_head
*iter
;
520 if (bond_uses_primary(bond
)) {
521 struct slave
*curr_active
= rtnl_dereference(bond
->curr_active_slave
);
524 err
= dev_set_allmulti(curr_active
->dev
, inc
);
528 bond_for_each_slave(bond
, slave
, iter
) {
529 err
= dev_set_allmulti(slave
->dev
, inc
);
537 /* Retrieve the list of registered multicast addresses for the bonding
538 * device and retransmit an IGMP JOIN request to the current active
541 static void bond_resend_igmp_join_requests_delayed(struct work_struct
*work
)
543 struct bonding
*bond
= container_of(work
, struct bonding
,
546 if (!rtnl_trylock()) {
547 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, 1);
550 call_netdevice_notifiers(NETDEV_RESEND_IGMP
, bond
->dev
);
552 if (bond
->igmp_retrans
> 1) {
553 bond
->igmp_retrans
--;
554 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, HZ
/5);
559 /* Flush bond's hardware addresses from slave */
560 static void bond_hw_addr_flush(struct net_device
*bond_dev
,
561 struct net_device
*slave_dev
)
563 struct bonding
*bond
= netdev_priv(bond_dev
);
565 dev_uc_unsync(slave_dev
, bond_dev
);
566 dev_mc_unsync(slave_dev
, bond_dev
);
568 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
569 /* del lacpdu mc addr from mc list */
570 u8 lacpdu_multicast
[ETH_ALEN
] = MULTICAST_LACPDU_ADDR
;
572 dev_mc_del(slave_dev
, lacpdu_multicast
);
576 /*--------------------------- Active slave change ---------------------------*/
578 /* Update the hardware address list and promisc/allmulti for the new and
579 * old active slaves (if any). Modes that are not using primary keep all
580 * slaves up date at all times; only the modes that use primary need to call
581 * this function to swap these settings during a failover.
583 static void bond_hw_addr_swap(struct bonding
*bond
, struct slave
*new_active
,
584 struct slave
*old_active
)
587 if (bond
->dev
->flags
& IFF_PROMISC
)
588 dev_set_promiscuity(old_active
->dev
, -1);
590 if (bond
->dev
->flags
& IFF_ALLMULTI
)
591 dev_set_allmulti(old_active
->dev
, -1);
593 bond_hw_addr_flush(bond
->dev
, old_active
->dev
);
597 /* FIXME: Signal errors upstream. */
598 if (bond
->dev
->flags
& IFF_PROMISC
)
599 dev_set_promiscuity(new_active
->dev
, 1);
601 if (bond
->dev
->flags
& IFF_ALLMULTI
)
602 dev_set_allmulti(new_active
->dev
, 1);
604 netif_addr_lock_bh(bond
->dev
);
605 dev_uc_sync(new_active
->dev
, bond
->dev
);
606 dev_mc_sync(new_active
->dev
, bond
->dev
);
607 netif_addr_unlock_bh(bond
->dev
);
612 * bond_set_dev_addr - clone slave's address to bond
613 * @bond_dev: bond net device
614 * @slave_dev: slave net device
616 * Should be called with RTNL held.
618 static void bond_set_dev_addr(struct net_device
*bond_dev
,
619 struct net_device
*slave_dev
)
621 netdev_dbg(bond_dev
, "bond_dev=%p slave_dev=%p slave_dev->name=%s slave_dev->addr_len=%d\n",
622 bond_dev
, slave_dev
, slave_dev
->name
, slave_dev
->addr_len
);
623 memcpy(bond_dev
->dev_addr
, slave_dev
->dev_addr
, slave_dev
->addr_len
);
624 bond_dev
->addr_assign_type
= NET_ADDR_STOLEN
;
625 call_netdevice_notifiers(NETDEV_CHANGEADDR
, bond_dev
);
628 static struct slave
*bond_get_old_active(struct bonding
*bond
,
629 struct slave
*new_active
)
632 struct list_head
*iter
;
634 bond_for_each_slave(bond
, slave
, iter
) {
635 if (slave
== new_active
)
638 if (ether_addr_equal(bond
->dev
->dev_addr
, slave
->dev
->dev_addr
))
645 /* bond_do_fail_over_mac
647 * Perform special MAC address swapping for fail_over_mac settings
651 static void bond_do_fail_over_mac(struct bonding
*bond
,
652 struct slave
*new_active
,
653 struct slave
*old_active
)
655 u8 tmp_mac
[ETH_ALEN
];
656 struct sockaddr saddr
;
659 switch (bond
->params
.fail_over_mac
) {
660 case BOND_FOM_ACTIVE
:
662 bond_set_dev_addr(bond
->dev
, new_active
->dev
);
664 case BOND_FOM_FOLLOW
:
665 /* if new_active && old_active, swap them
666 * if just old_active, do nothing (going to no active slave)
667 * if just new_active, set new_active to bond's MAC
673 old_active
= bond_get_old_active(bond
, new_active
);
676 ether_addr_copy(tmp_mac
, new_active
->dev
->dev_addr
);
677 ether_addr_copy(saddr
.sa_data
,
678 old_active
->dev
->dev_addr
);
679 saddr
.sa_family
= new_active
->dev
->type
;
681 ether_addr_copy(saddr
.sa_data
, bond
->dev
->dev_addr
);
682 saddr
.sa_family
= bond
->dev
->type
;
685 rv
= dev_set_mac_address(new_active
->dev
, &saddr
);
687 netdev_err(bond
->dev
, "Error %d setting MAC of slave %s\n",
688 -rv
, new_active
->dev
->name
);
695 ether_addr_copy(saddr
.sa_data
, tmp_mac
);
696 saddr
.sa_family
= old_active
->dev
->type
;
698 rv
= dev_set_mac_address(old_active
->dev
, &saddr
);
700 netdev_err(bond
->dev
, "Error %d setting MAC of slave %s\n",
701 -rv
, new_active
->dev
->name
);
705 netdev_err(bond
->dev
, "bond_do_fail_over_mac impossible: bad policy %d\n",
706 bond
->params
.fail_over_mac
);
712 static struct slave
*bond_choose_primary_or_current(struct bonding
*bond
)
714 struct slave
*prim
= rtnl_dereference(bond
->primary_slave
);
715 struct slave
*curr
= rtnl_dereference(bond
->curr_active_slave
);
717 if (!prim
|| prim
->link
!= BOND_LINK_UP
) {
718 if (!curr
|| curr
->link
!= BOND_LINK_UP
)
723 if (bond
->force_primary
) {
724 bond
->force_primary
= false;
728 if (!curr
|| curr
->link
!= BOND_LINK_UP
)
731 /* At this point, prim and curr are both up */
732 switch (bond
->params
.primary_reselect
) {
733 case BOND_PRI_RESELECT_ALWAYS
:
735 case BOND_PRI_RESELECT_BETTER
:
736 if (prim
->speed
< curr
->speed
)
738 if (prim
->speed
== curr
->speed
&& prim
->duplex
<= curr
->duplex
)
741 case BOND_PRI_RESELECT_FAILURE
:
744 netdev_err(bond
->dev
, "impossible primary_reselect %d\n",
745 bond
->params
.primary_reselect
);
751 * bond_find_best_slave - select the best available slave to be the active one
752 * @bond: our bonding struct
754 static struct slave
*bond_find_best_slave(struct bonding
*bond
)
756 struct slave
*slave
, *bestslave
= NULL
;
757 struct list_head
*iter
;
758 int mintime
= bond
->params
.updelay
;
760 slave
= bond_choose_primary_or_current(bond
);
764 bond_for_each_slave(bond
, slave
, iter
) {
765 if (slave
->link
== BOND_LINK_UP
)
767 if (slave
->link
== BOND_LINK_BACK
&& bond_slave_is_up(slave
) &&
768 slave
->delay
< mintime
) {
769 mintime
= slave
->delay
;
777 static bool bond_should_notify_peers(struct bonding
*bond
)
782 slave
= rcu_dereference(bond
->curr_active_slave
);
785 netdev_dbg(bond
->dev
, "bond_should_notify_peers: slave %s\n",
786 slave
? slave
->dev
->name
: "NULL");
788 if (!slave
|| !bond
->send_peer_notif
||
789 !netif_carrier_ok(bond
->dev
) ||
790 test_bit(__LINK_STATE_LINKWATCH_PENDING
, &slave
->dev
->state
))
797 * change_active_interface - change the active slave into the specified one
798 * @bond: our bonding struct
799 * @new: the new slave to make the active one
801 * Set the new slave to the bond's settings and unset them on the old
803 * Setting include flags, mc-list, promiscuity, allmulti, etc.
805 * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
806 * because it is apparently the best available slave we have, even though its
807 * updelay hasn't timed out yet.
809 * Caller must hold RTNL.
811 void bond_change_active_slave(struct bonding
*bond
, struct slave
*new_active
)
813 struct slave
*old_active
;
817 old_active
= rtnl_dereference(bond
->curr_active_slave
);
819 if (old_active
== new_active
)
823 new_active
->last_link_up
= jiffies
;
825 if (new_active
->link
== BOND_LINK_BACK
) {
826 if (bond_uses_primary(bond
)) {
827 netdev_info(bond
->dev
, "making interface %s the new active one %d ms earlier\n",
828 new_active
->dev
->name
,
829 (bond
->params
.updelay
- new_active
->delay
) * bond
->params
.miimon
);
832 new_active
->delay
= 0;
833 bond_set_slave_link_state(new_active
, BOND_LINK_UP
,
834 BOND_SLAVE_NOTIFY_NOW
);
836 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
837 bond_3ad_handle_link_change(new_active
, BOND_LINK_UP
);
839 if (bond_is_lb(bond
))
840 bond_alb_handle_link_change(bond
, new_active
, BOND_LINK_UP
);
842 if (bond_uses_primary(bond
)) {
843 netdev_info(bond
->dev
, "making interface %s the new active one\n",
844 new_active
->dev
->name
);
849 if (bond_uses_primary(bond
))
850 bond_hw_addr_swap(bond
, new_active
, old_active
);
852 if (bond_is_lb(bond
)) {
853 bond_alb_handle_active_change(bond
, new_active
);
855 bond_set_slave_inactive_flags(old_active
,
856 BOND_SLAVE_NOTIFY_NOW
);
858 bond_set_slave_active_flags(new_active
,
859 BOND_SLAVE_NOTIFY_NOW
);
861 rcu_assign_pointer(bond
->curr_active_slave
, new_active
);
864 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
) {
866 bond_set_slave_inactive_flags(old_active
,
867 BOND_SLAVE_NOTIFY_NOW
);
870 bool should_notify_peers
= false;
872 bond_set_slave_active_flags(new_active
,
873 BOND_SLAVE_NOTIFY_NOW
);
875 if (bond
->params
.fail_over_mac
)
876 bond_do_fail_over_mac(bond
, new_active
,
879 if (netif_running(bond
->dev
)) {
880 bond
->send_peer_notif
=
881 bond
->params
.num_peer_notif
;
882 should_notify_peers
=
883 bond_should_notify_peers(bond
);
886 call_netdevice_notifiers(NETDEV_BONDING_FAILOVER
, bond
->dev
);
887 if (should_notify_peers
)
888 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
,
893 /* resend IGMP joins since active slave has changed or
894 * all were sent on curr_active_slave.
895 * resend only if bond is brought up with the affected
896 * bonding modes and the retransmission is enabled
898 if (netif_running(bond
->dev
) && (bond
->params
.resend_igmp
> 0) &&
899 ((bond_uses_primary(bond
) && new_active
) ||
900 BOND_MODE(bond
) == BOND_MODE_ROUNDROBIN
)) {
901 bond
->igmp_retrans
= bond
->params
.resend_igmp
;
902 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, 1);
907 * bond_select_active_slave - select a new active slave, if needed
908 * @bond: our bonding struct
910 * This functions should be called when one of the following occurs:
911 * - The old curr_active_slave has been released or lost its link.
912 * - The primary_slave has got its link back.
913 * - A slave has got its link back and there's no old curr_active_slave.
915 * Caller must hold RTNL.
917 void bond_select_active_slave(struct bonding
*bond
)
919 struct slave
*best_slave
;
924 best_slave
= bond_find_best_slave(bond
);
925 if (best_slave
!= rtnl_dereference(bond
->curr_active_slave
)) {
926 bond_change_active_slave(bond
, best_slave
);
927 rv
= bond_set_carrier(bond
);
931 if (netif_carrier_ok(bond
->dev
))
932 netdev_info(bond
->dev
, "first active interface up!\n");
934 netdev_info(bond
->dev
, "now running without any active interface!\n");
938 #ifdef CONFIG_NET_POLL_CONTROLLER
939 static inline int slave_enable_netpoll(struct slave
*slave
)
944 np
= kzalloc(sizeof(*np
), GFP_KERNEL
);
949 err
= __netpoll_setup(np
, slave
->dev
);
958 static inline void slave_disable_netpoll(struct slave
*slave
)
960 struct netpoll
*np
= slave
->np
;
966 __netpoll_free_async(np
);
969 static void bond_poll_controller(struct net_device
*bond_dev
)
971 struct bonding
*bond
= netdev_priv(bond_dev
);
972 struct slave
*slave
= NULL
;
973 struct list_head
*iter
;
974 struct ad_info ad_info
;
975 struct netpoll_info
*ni
;
976 const struct net_device_ops
*ops
;
978 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
979 if (bond_3ad_get_active_agg_info(bond
, &ad_info
))
982 bond_for_each_slave_rcu(bond
, slave
, iter
) {
983 ops
= slave
->dev
->netdev_ops
;
984 if (!bond_slave_is_up(slave
) || !ops
->ndo_poll_controller
)
987 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
988 struct aggregator
*agg
=
989 SLAVE_AD_INFO(slave
)->port
.aggregator
;
992 agg
->aggregator_identifier
!= ad_info
.aggregator_id
)
996 ni
= rcu_dereference_bh(slave
->dev
->npinfo
);
997 if (down_trylock(&ni
->dev_lock
))
999 ops
->ndo_poll_controller(slave
->dev
);
1004 static void bond_netpoll_cleanup(struct net_device
*bond_dev
)
1006 struct bonding
*bond
= netdev_priv(bond_dev
);
1007 struct list_head
*iter
;
1008 struct slave
*slave
;
1010 bond_for_each_slave(bond
, slave
, iter
)
1011 if (bond_slave_is_up(slave
))
1012 slave_disable_netpoll(slave
);
1015 static int bond_netpoll_setup(struct net_device
*dev
, struct netpoll_info
*ni
)
1017 struct bonding
*bond
= netdev_priv(dev
);
1018 struct list_head
*iter
;
1019 struct slave
*slave
;
1022 bond_for_each_slave(bond
, slave
, iter
) {
1023 err
= slave_enable_netpoll(slave
);
1025 bond_netpoll_cleanup(dev
);
1032 static inline int slave_enable_netpoll(struct slave
*slave
)
1036 static inline void slave_disable_netpoll(struct slave
*slave
)
1039 static void bond_netpoll_cleanup(struct net_device
*bond_dev
)
1044 /*---------------------------------- IOCTL ----------------------------------*/
1046 static netdev_features_t
bond_fix_features(struct net_device
*dev
,
1047 netdev_features_t features
)
1049 struct bonding
*bond
= netdev_priv(dev
);
1050 struct list_head
*iter
;
1051 netdev_features_t mask
;
1052 struct slave
*slave
;
1056 features
&= ~NETIF_F_ONE_FOR_ALL
;
1057 features
|= NETIF_F_ALL_FOR_ALL
;
1059 bond_for_each_slave(bond
, slave
, iter
) {
1060 features
= netdev_increment_features(features
,
1061 slave
->dev
->features
,
1064 features
= netdev_add_tso_features(features
, mask
);
1069 #define BOND_VLAN_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
1070 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
1071 NETIF_F_HIGHDMA | NETIF_F_LRO)
1073 #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
1074 NETIF_F_RXCSUM | NETIF_F_ALL_TSO)
1076 static void bond_compute_features(struct bonding
*bond
)
1078 unsigned int dst_release_flag
= IFF_XMIT_DST_RELEASE
|
1079 IFF_XMIT_DST_RELEASE_PERM
;
1080 netdev_features_t vlan_features
= BOND_VLAN_FEATURES
;
1081 netdev_features_t enc_features
= BOND_ENC_FEATURES
;
1082 struct net_device
*bond_dev
= bond
->dev
;
1083 struct list_head
*iter
;
1084 struct slave
*slave
;
1085 unsigned short max_hard_header_len
= ETH_HLEN
;
1086 unsigned int gso_max_size
= GSO_MAX_SIZE
;
1087 u16 gso_max_segs
= GSO_MAX_SEGS
;
1089 if (!bond_has_slaves(bond
))
1091 vlan_features
&= NETIF_F_ALL_FOR_ALL
;
1093 bond_for_each_slave(bond
, slave
, iter
) {
1094 vlan_features
= netdev_increment_features(vlan_features
,
1095 slave
->dev
->vlan_features
, BOND_VLAN_FEATURES
);
1097 enc_features
= netdev_increment_features(enc_features
,
1098 slave
->dev
->hw_enc_features
,
1100 dst_release_flag
&= slave
->dev
->priv_flags
;
1101 if (slave
->dev
->hard_header_len
> max_hard_header_len
)
1102 max_hard_header_len
= slave
->dev
->hard_header_len
;
1104 gso_max_size
= min(gso_max_size
, slave
->dev
->gso_max_size
);
1105 gso_max_segs
= min(gso_max_segs
, slave
->dev
->gso_max_segs
);
1109 bond_dev
->vlan_features
= vlan_features
;
1110 bond_dev
->hw_enc_features
= enc_features
| NETIF_F_GSO_ENCAP_ALL
;
1111 bond_dev
->hard_header_len
= max_hard_header_len
;
1112 bond_dev
->gso_max_segs
= gso_max_segs
;
1113 netif_set_gso_max_size(bond_dev
, gso_max_size
);
1115 bond_dev
->priv_flags
&= ~IFF_XMIT_DST_RELEASE
;
1116 if ((bond_dev
->priv_flags
& IFF_XMIT_DST_RELEASE_PERM
) &&
1117 dst_release_flag
== (IFF_XMIT_DST_RELEASE
| IFF_XMIT_DST_RELEASE_PERM
))
1118 bond_dev
->priv_flags
|= IFF_XMIT_DST_RELEASE
;
1120 netdev_change_features(bond_dev
);
1123 static void bond_setup_by_slave(struct net_device
*bond_dev
,
1124 struct net_device
*slave_dev
)
1126 bond_dev
->header_ops
= slave_dev
->header_ops
;
1128 bond_dev
->type
= slave_dev
->type
;
1129 bond_dev
->hard_header_len
= slave_dev
->hard_header_len
;
1130 bond_dev
->addr_len
= slave_dev
->addr_len
;
1132 memcpy(bond_dev
->broadcast
, slave_dev
->broadcast
,
1133 slave_dev
->addr_len
);
1136 /* On bonding slaves other than the currently active slave, suppress
1137 * duplicates except for alb non-mcast/bcast.
1139 static bool bond_should_deliver_exact_match(struct sk_buff
*skb
,
1140 struct slave
*slave
,
1141 struct bonding
*bond
)
1143 if (bond_is_slave_inactive(slave
)) {
1144 if (BOND_MODE(bond
) == BOND_MODE_ALB
&&
1145 skb
->pkt_type
!= PACKET_BROADCAST
&&
1146 skb
->pkt_type
!= PACKET_MULTICAST
)
1153 static rx_handler_result_t
bond_handle_frame(struct sk_buff
**pskb
)
1155 struct sk_buff
*skb
= *pskb
;
1156 struct slave
*slave
;
1157 struct bonding
*bond
;
1158 int (*recv_probe
)(const struct sk_buff
*, struct bonding
*,
1160 int ret
= RX_HANDLER_ANOTHER
;
1162 skb
= skb_share_check(skb
, GFP_ATOMIC
);
1164 return RX_HANDLER_CONSUMED
;
1168 slave
= bond_slave_get_rcu(skb
->dev
);
1171 recv_probe
= ACCESS_ONCE(bond
->recv_probe
);
1173 ret
= recv_probe(skb
, bond
, slave
);
1174 if (ret
== RX_HANDLER_CONSUMED
) {
1180 if (bond_should_deliver_exact_match(skb
, slave
, bond
))
1181 return RX_HANDLER_EXACT
;
1183 skb
->dev
= bond
->dev
;
1185 if (BOND_MODE(bond
) == BOND_MODE_ALB
&&
1186 bond
->dev
->priv_flags
& IFF_BRIDGE_PORT
&&
1187 skb
->pkt_type
== PACKET_HOST
) {
1189 if (unlikely(skb_cow_head(skb
,
1190 skb
->data
- skb_mac_header(skb
)))) {
1192 return RX_HANDLER_CONSUMED
;
1194 ether_addr_copy(eth_hdr(skb
)->h_dest
, bond
->dev
->dev_addr
);
1200 static enum netdev_lag_tx_type
bond_lag_tx_type(struct bonding
*bond
)
1202 switch (BOND_MODE(bond
)) {
1203 case BOND_MODE_ROUNDROBIN
:
1204 return NETDEV_LAG_TX_TYPE_ROUNDROBIN
;
1205 case BOND_MODE_ACTIVEBACKUP
:
1206 return NETDEV_LAG_TX_TYPE_ACTIVEBACKUP
;
1207 case BOND_MODE_BROADCAST
:
1208 return NETDEV_LAG_TX_TYPE_BROADCAST
;
1210 case BOND_MODE_8023AD
:
1211 return NETDEV_LAG_TX_TYPE_HASH
;
1213 return NETDEV_LAG_TX_TYPE_UNKNOWN
;
1217 static int bond_master_upper_dev_link(struct bonding
*bond
, struct slave
*slave
)
1219 struct netdev_lag_upper_info lag_upper_info
;
1222 lag_upper_info
.tx_type
= bond_lag_tx_type(bond
);
1223 err
= netdev_master_upper_dev_link(slave
->dev
, bond
->dev
, slave
,
1227 rtmsg_ifinfo(RTM_NEWLINK
, slave
->dev
, IFF_SLAVE
, GFP_KERNEL
);
1231 static void bond_upper_dev_unlink(struct bonding
*bond
, struct slave
*slave
)
1233 netdev_upper_dev_unlink(slave
->dev
, bond
->dev
);
1234 slave
->dev
->flags
&= ~IFF_SLAVE
;
1235 rtmsg_ifinfo(RTM_NEWLINK
, slave
->dev
, IFF_SLAVE
, GFP_KERNEL
);
1238 static struct slave
*bond_alloc_slave(struct bonding
*bond
)
1240 struct slave
*slave
= NULL
;
1242 slave
= kzalloc(sizeof(*slave
), GFP_KERNEL
);
1246 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
1247 SLAVE_AD_INFO(slave
) = kzalloc(sizeof(struct ad_slave_info
),
1249 if (!SLAVE_AD_INFO(slave
)) {
1257 static void bond_free_slave(struct slave
*slave
)
1259 struct bonding
*bond
= bond_get_bond_by_slave(slave
);
1261 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
1262 kfree(SLAVE_AD_INFO(slave
));
1267 static void bond_fill_ifbond(struct bonding
*bond
, struct ifbond
*info
)
1269 info
->bond_mode
= BOND_MODE(bond
);
1270 info
->miimon
= bond
->params
.miimon
;
1271 info
->num_slaves
= bond
->slave_cnt
;
1274 static void bond_fill_ifslave(struct slave
*slave
, struct ifslave
*info
)
1276 strcpy(info
->slave_name
, slave
->dev
->name
);
1277 info
->link
= slave
->link
;
1278 info
->state
= bond_slave_state(slave
);
1279 info
->link_failure_count
= slave
->link_failure_count
;
1282 static void bond_netdev_notify(struct net_device
*dev
,
1283 struct netdev_bonding_info
*info
)
1286 netdev_bonding_info_change(dev
, info
);
1290 static void bond_netdev_notify_work(struct work_struct
*_work
)
1292 struct netdev_notify_work
*w
=
1293 container_of(_work
, struct netdev_notify_work
, work
.work
);
1295 bond_netdev_notify(w
->dev
, &w
->bonding_info
);
1300 void bond_queue_slave_event(struct slave
*slave
)
1302 struct bonding
*bond
= slave
->bond
;
1303 struct netdev_notify_work
*nnw
= kzalloc(sizeof(*nnw
), GFP_ATOMIC
);
1308 dev_hold(slave
->dev
);
1309 nnw
->dev
= slave
->dev
;
1310 bond_fill_ifslave(slave
, &nnw
->bonding_info
.slave
);
1311 bond_fill_ifbond(bond
, &nnw
->bonding_info
.master
);
1312 INIT_DELAYED_WORK(&nnw
->work
, bond_netdev_notify_work
);
1314 queue_delayed_work(slave
->bond
->wq
, &nnw
->work
, 0);
1317 void bond_lower_state_changed(struct slave
*slave
)
1319 struct netdev_lag_lower_state_info info
;
1321 info
.link_up
= slave
->link
== BOND_LINK_UP
||
1322 slave
->link
== BOND_LINK_FAIL
;
1323 info
.tx_enabled
= bond_is_active_slave(slave
);
1324 netdev_lower_state_changed(slave
->dev
, &info
);
1327 /* enslave device <slave> to bond device <master> */
1328 int bond_enslave(struct net_device
*bond_dev
, struct net_device
*slave_dev
)
1330 struct bonding
*bond
= netdev_priv(bond_dev
);
1331 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
1332 struct slave
*new_slave
= NULL
, *prev_slave
;
1333 struct sockaddr addr
;
1337 if (!bond
->params
.use_carrier
&&
1338 slave_dev
->ethtool_ops
->get_link
== NULL
&&
1339 slave_ops
->ndo_do_ioctl
== NULL
) {
1340 netdev_warn(bond_dev
, "no link monitoring support for %s\n",
1344 /* already in-use? */
1345 if (netdev_is_rx_handler_busy(slave_dev
)) {
1346 netdev_err(bond_dev
,
1347 "Error: Device is in use and cannot be enslaved\n");
1351 if (bond_dev
== slave_dev
) {
1352 netdev_err(bond_dev
, "cannot enslave bond to itself.\n");
1356 /* vlan challenged mutual exclusion */
1357 /* no need to lock since we're protected by rtnl_lock */
1358 if (slave_dev
->features
& NETIF_F_VLAN_CHALLENGED
) {
1359 netdev_dbg(bond_dev
, "%s is NETIF_F_VLAN_CHALLENGED\n",
1361 if (vlan_uses_dev(bond_dev
)) {
1362 netdev_err(bond_dev
, "Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
1363 slave_dev
->name
, bond_dev
->name
);
1366 netdev_warn(bond_dev
, "enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
1367 slave_dev
->name
, slave_dev
->name
,
1371 netdev_dbg(bond_dev
, "%s is !NETIF_F_VLAN_CHALLENGED\n",
1375 /* Old ifenslave binaries are no longer supported. These can
1376 * be identified with moderate accuracy by the state of the slave:
1377 * the current ifenslave will set the interface down prior to
1378 * enslaving it; the old ifenslave will not.
1380 if (slave_dev
->flags
& IFF_UP
) {
1381 netdev_err(bond_dev
, "%s is up - this may be due to an out of date ifenslave\n",
1386 /* set bonding device ether type by slave - bonding netdevices are
1387 * created with ether_setup, so when the slave type is not ARPHRD_ETHER
1388 * there is a need to override some of the type dependent attribs/funcs.
1390 * bond ether type mutual exclusion - don't allow slaves of dissimilar
1391 * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
1393 if (!bond_has_slaves(bond
)) {
1394 if (bond_dev
->type
!= slave_dev
->type
) {
1395 netdev_dbg(bond_dev
, "change device type from %d to %d\n",
1396 bond_dev
->type
, slave_dev
->type
);
1398 res
= call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE
,
1400 res
= notifier_to_errno(res
);
1402 netdev_err(bond_dev
, "refused to change device type\n");
1406 /* Flush unicast and multicast addresses */
1407 dev_uc_flush(bond_dev
);
1408 dev_mc_flush(bond_dev
);
1410 if (slave_dev
->type
!= ARPHRD_ETHER
)
1411 bond_setup_by_slave(bond_dev
, slave_dev
);
1413 ether_setup(bond_dev
);
1414 bond_dev
->priv_flags
&= ~IFF_TX_SKB_SHARING
;
1417 call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE
,
1420 } else if (bond_dev
->type
!= slave_dev
->type
) {
1421 netdev_err(bond_dev
, "%s ether type (%d) is different from other slaves (%d), can not enslave it\n",
1422 slave_dev
->name
, slave_dev
->type
, bond_dev
->type
);
1426 if (slave_dev
->type
== ARPHRD_INFINIBAND
&&
1427 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1428 netdev_warn(bond_dev
, "Type (%d) supports only active-backup mode\n",
1431 goto err_undo_flags
;
1434 if (!slave_ops
->ndo_set_mac_address
||
1435 slave_dev
->type
== ARPHRD_INFINIBAND
) {
1436 netdev_warn(bond_dev
, "The slave device specified does not support setting the MAC address\n");
1437 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
&&
1438 bond
->params
.fail_over_mac
!= BOND_FOM_ACTIVE
) {
1439 if (!bond_has_slaves(bond
)) {
1440 bond
->params
.fail_over_mac
= BOND_FOM_ACTIVE
;
1441 netdev_warn(bond_dev
, "Setting fail_over_mac to active for active-backup mode\n");
1443 netdev_err(bond_dev
, "The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active\n");
1445 goto err_undo_flags
;
1450 call_netdevice_notifiers(NETDEV_JOIN
, slave_dev
);
1452 /* If this is the first slave, then we need to set the master's hardware
1453 * address to be the same as the slave's.
1455 if (!bond_has_slaves(bond
) &&
1456 bond
->dev
->addr_assign_type
== NET_ADDR_RANDOM
)
1457 bond_set_dev_addr(bond
->dev
, slave_dev
);
1459 new_slave
= bond_alloc_slave(bond
);
1462 goto err_undo_flags
;
1465 new_slave
->bond
= bond
;
1466 new_slave
->dev
= slave_dev
;
1467 /* Set the new_slave's queue_id to be zero. Queue ID mapping
1468 * is set via sysfs or module option if desired.
1470 new_slave
->queue_id
= 0;
1472 /* Save slave's original mtu and then set it to match the bond */
1473 new_slave
->original_mtu
= slave_dev
->mtu
;
1474 res
= dev_set_mtu(slave_dev
, bond
->dev
->mtu
);
1476 netdev_dbg(bond_dev
, "Error %d calling dev_set_mtu\n", res
);
1480 /* Save slave's original ("permanent") mac address for modes
1481 * that need it, and for restoring it upon release, and then
1482 * set it to the master's address
1484 ether_addr_copy(new_slave
->perm_hwaddr
, slave_dev
->dev_addr
);
1486 if (!bond
->params
.fail_over_mac
||
1487 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1488 /* Set slave to master's mac address. The application already
1489 * set the master's mac address to that of the first slave
1491 memcpy(addr
.sa_data
, bond_dev
->dev_addr
, bond_dev
->addr_len
);
1492 addr
.sa_family
= slave_dev
->type
;
1493 res
= dev_set_mac_address(slave_dev
, &addr
);
1495 netdev_dbg(bond_dev
, "Error %d calling set_mac_address\n", res
);
1496 goto err_restore_mtu
;
1500 /* set slave flag before open to prevent IPv6 addrconf */
1501 slave_dev
->flags
|= IFF_SLAVE
;
1503 /* open the slave since the application closed it */
1504 res
= dev_open(slave_dev
);
1506 netdev_dbg(bond_dev
, "Opening slave %s failed\n", slave_dev
->name
);
1507 goto err_restore_mac
;
1510 slave_dev
->priv_flags
|= IFF_BONDING
;
1511 /* initialize slave stats */
1512 dev_get_stats(new_slave
->dev
, &new_slave
->slave_stats
);
1514 if (bond_is_lb(bond
)) {
1515 /* bond_alb_init_slave() must be called before all other stages since
1516 * it might fail and we do not want to have to undo everything
1518 res
= bond_alb_init_slave(bond
, new_slave
);
1523 /* If the mode uses primary, then the following is handled by
1524 * bond_change_active_slave().
1526 if (!bond_uses_primary(bond
)) {
1527 /* set promiscuity level to new slave */
1528 if (bond_dev
->flags
& IFF_PROMISC
) {
1529 res
= dev_set_promiscuity(slave_dev
, 1);
1534 /* set allmulti level to new slave */
1535 if (bond_dev
->flags
& IFF_ALLMULTI
) {
1536 res
= dev_set_allmulti(slave_dev
, 1);
1541 netif_addr_lock_bh(bond_dev
);
1543 dev_mc_sync_multiple(slave_dev
, bond_dev
);
1544 dev_uc_sync_multiple(slave_dev
, bond_dev
);
1546 netif_addr_unlock_bh(bond_dev
);
1549 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
1550 /* add lacpdu mc addr to mc list */
1551 u8 lacpdu_multicast
[ETH_ALEN
] = MULTICAST_LACPDU_ADDR
;
1553 dev_mc_add(slave_dev
, lacpdu_multicast
);
1556 res
= vlan_vids_add_by_dev(slave_dev
, bond_dev
);
1558 netdev_err(bond_dev
, "Couldn't add bond vlan ids to %s\n",
1563 prev_slave
= bond_last_slave(bond
);
1565 new_slave
->delay
= 0;
1566 new_slave
->link_failure_count
= 0;
1568 bond_update_speed_duplex(new_slave
);
1570 new_slave
->last_rx
= jiffies
-
1571 (msecs_to_jiffies(bond
->params
.arp_interval
) + 1);
1572 for (i
= 0; i
< BOND_MAX_ARP_TARGETS
; i
++)
1573 new_slave
->target_last_arp_rx
[i
] = new_slave
->last_rx
;
1575 if (bond
->params
.miimon
&& !bond
->params
.use_carrier
) {
1576 link_reporting
= bond_check_dev_link(bond
, slave_dev
, 1);
1578 if ((link_reporting
== -1) && !bond
->params
.arp_interval
) {
1579 /* miimon is set but a bonded network driver
1580 * does not support ETHTOOL/MII and
1581 * arp_interval is not set. Note: if
1582 * use_carrier is enabled, we will never go
1583 * here (because netif_carrier is always
1584 * supported); thus, we don't need to change
1585 * the messages for netif_carrier.
1587 netdev_warn(bond_dev
, "MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n",
1589 } else if (link_reporting
== -1) {
1590 /* unable get link status using mii/ethtool */
1591 netdev_warn(bond_dev
, "can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n",
1596 /* check for initial state */
1597 new_slave
->link
= BOND_LINK_NOCHANGE
;
1598 if (bond
->params
.miimon
) {
1599 if (bond_check_dev_link(bond
, slave_dev
, 0) == BMSR_LSTATUS
) {
1600 if (bond
->params
.updelay
) {
1601 bond_set_slave_link_state(new_slave
,
1603 BOND_SLAVE_NOTIFY_NOW
);
1604 new_slave
->delay
= bond
->params
.updelay
;
1606 bond_set_slave_link_state(new_slave
,
1608 BOND_SLAVE_NOTIFY_NOW
);
1611 bond_set_slave_link_state(new_slave
, BOND_LINK_DOWN
,
1612 BOND_SLAVE_NOTIFY_NOW
);
1614 } else if (bond
->params
.arp_interval
) {
1615 bond_set_slave_link_state(new_slave
,
1616 (netif_carrier_ok(slave_dev
) ?
1617 BOND_LINK_UP
: BOND_LINK_DOWN
),
1618 BOND_SLAVE_NOTIFY_NOW
);
1620 bond_set_slave_link_state(new_slave
, BOND_LINK_UP
,
1621 BOND_SLAVE_NOTIFY_NOW
);
1624 if (new_slave
->link
!= BOND_LINK_DOWN
)
1625 new_slave
->last_link_up
= jiffies
;
1626 netdev_dbg(bond_dev
, "Initial state of slave_dev is BOND_LINK_%s\n",
1627 new_slave
->link
== BOND_LINK_DOWN
? "DOWN" :
1628 (new_slave
->link
== BOND_LINK_UP
? "UP" : "BACK"));
1630 if (bond_uses_primary(bond
) && bond
->params
.primary
[0]) {
1631 /* if there is a primary slave, remember it */
1632 if (strcmp(bond
->params
.primary
, new_slave
->dev
->name
) == 0) {
1633 rcu_assign_pointer(bond
->primary_slave
, new_slave
);
1634 bond
->force_primary
= true;
1638 switch (BOND_MODE(bond
)) {
1639 case BOND_MODE_ACTIVEBACKUP
:
1640 bond_set_slave_inactive_flags(new_slave
,
1641 BOND_SLAVE_NOTIFY_NOW
);
1643 case BOND_MODE_8023AD
:
1644 /* in 802.3ad mode, the internal mechanism
1645 * will activate the slaves in the selected
1648 bond_set_slave_inactive_flags(new_slave
, BOND_SLAVE_NOTIFY_NOW
);
1649 /* if this is the first slave */
1651 SLAVE_AD_INFO(new_slave
)->id
= 1;
1652 /* Initialize AD with the number of times that the AD timer is called in 1 second
1653 * can be called only after the mac address of the bond is set
1655 bond_3ad_initialize(bond
, 1000/AD_TIMER_INTERVAL
);
1657 SLAVE_AD_INFO(new_slave
)->id
=
1658 SLAVE_AD_INFO(prev_slave
)->id
+ 1;
1661 bond_3ad_bind_slave(new_slave
);
1665 bond_set_active_slave(new_slave
);
1666 bond_set_slave_inactive_flags(new_slave
, BOND_SLAVE_NOTIFY_NOW
);
1669 netdev_dbg(bond_dev
, "This slave is always active in trunk mode\n");
1671 /* always active in trunk mode */
1672 bond_set_active_slave(new_slave
);
1674 /* In trunking mode there is little meaning to curr_active_slave
1675 * anyway (it holds no special properties of the bond device),
1676 * so we can change it without calling change_active_interface()
1678 if (!rcu_access_pointer(bond
->curr_active_slave
) &&
1679 new_slave
->link
== BOND_LINK_UP
)
1680 rcu_assign_pointer(bond
->curr_active_slave
, new_slave
);
1683 } /* switch(bond_mode) */
1685 #ifdef CONFIG_NET_POLL_CONTROLLER
1686 slave_dev
->npinfo
= bond
->dev
->npinfo
;
1687 if (slave_dev
->npinfo
) {
1688 if (slave_enable_netpoll(new_slave
)) {
1689 netdev_info(bond_dev
, "master_dev is using netpoll, but new slave device does not support netpoll\n");
1696 if (!(bond_dev
->features
& NETIF_F_LRO
))
1697 dev_disable_lro(slave_dev
);
1699 res
= netdev_rx_handler_register(slave_dev
, bond_handle_frame
,
1702 netdev_dbg(bond_dev
, "Error %d calling netdev_rx_handler_register\n", res
);
1706 res
= bond_master_upper_dev_link(bond
, new_slave
);
1708 netdev_dbg(bond_dev
, "Error %d calling bond_master_upper_dev_link\n", res
);
1709 goto err_unregister
;
1712 res
= bond_sysfs_slave_add(new_slave
);
1714 netdev_dbg(bond_dev
, "Error %d calling bond_sysfs_slave_add\n", res
);
1715 goto err_upper_unlink
;
1719 bond_compute_features(bond
);
1720 bond_set_carrier(bond
);
1722 if (bond_uses_primary(bond
)) {
1724 bond_select_active_slave(bond
);
1725 unblock_netpoll_tx();
1728 if (bond_mode_uses_xmit_hash(bond
))
1729 bond_update_slave_arr(bond
, NULL
);
1731 netdev_info(bond_dev
, "Enslaving %s as %s interface with %s link\n",
1733 bond_is_active_slave(new_slave
) ? "an active" : "a backup",
1734 new_slave
->link
!= BOND_LINK_DOWN
? "an up" : "a down");
1736 /* enslave is successful */
1737 bond_queue_slave_event(new_slave
);
1740 /* Undo stages on error */
1742 bond_upper_dev_unlink(bond
, new_slave
);
1745 netdev_rx_handler_unregister(slave_dev
);
1748 if (!bond_uses_primary(bond
))
1749 bond_hw_addr_flush(bond_dev
, slave_dev
);
1751 vlan_vids_del_by_dev(slave_dev
, bond_dev
);
1752 if (rcu_access_pointer(bond
->primary_slave
) == new_slave
)
1753 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
1754 if (rcu_access_pointer(bond
->curr_active_slave
) == new_slave
) {
1756 bond_change_active_slave(bond
, NULL
);
1757 bond_select_active_slave(bond
);
1758 unblock_netpoll_tx();
1760 /* either primary_slave or curr_active_slave might've changed */
1762 slave_disable_netpoll(new_slave
);
1765 slave_dev
->priv_flags
&= ~IFF_BONDING
;
1766 dev_close(slave_dev
);
1769 slave_dev
->flags
&= ~IFF_SLAVE
;
1770 if (!bond
->params
.fail_over_mac
||
1771 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1772 /* XXX TODO - fom follow mode needs to change master's
1773 * MAC if this slave's MAC is in use by the bond, or at
1774 * least print a warning.
1776 ether_addr_copy(addr
.sa_data
, new_slave
->perm_hwaddr
);
1777 addr
.sa_family
= slave_dev
->type
;
1778 dev_set_mac_address(slave_dev
, &addr
);
1782 dev_set_mtu(slave_dev
, new_slave
->original_mtu
);
1785 bond_free_slave(new_slave
);
1788 /* Enslave of first slave has failed and we need to fix master's mac */
1789 if (!bond_has_slaves(bond
)) {
1790 if (ether_addr_equal_64bits(bond_dev
->dev_addr
,
1791 slave_dev
->dev_addr
))
1792 eth_hw_addr_random(bond_dev
);
1793 if (bond_dev
->type
!= ARPHRD_ETHER
) {
1794 dev_close(bond_dev
);
1795 ether_setup(bond_dev
);
1796 bond_dev
->flags
|= IFF_MASTER
;
1797 bond_dev
->priv_flags
&= ~IFF_TX_SKB_SHARING
;
1804 /* Try to release the slave device <slave> from the bond device <master>
1805 * It is legal to access curr_active_slave without a lock because all the function
1806 * is RTNL-locked. If "all" is true it means that the function is being called
1807 * while destroying a bond interface and all slaves are being released.
1809 * The rules for slave state should be:
1810 * for Active/Backup:
1811 * Active stays on all backups go down
1812 * for Bonded connections:
1813 * The first up interface should be left on and all others downed.
1815 static int __bond_release_one(struct net_device
*bond_dev
,
1816 struct net_device
*slave_dev
,
1819 struct bonding
*bond
= netdev_priv(bond_dev
);
1820 struct slave
*slave
, *oldcurrent
;
1821 struct sockaddr addr
;
1822 int old_flags
= bond_dev
->flags
;
1823 netdev_features_t old_features
= bond_dev
->features
;
1825 /* slave is not a slave or master is not master of this slave */
1826 if (!(slave_dev
->flags
& IFF_SLAVE
) ||
1827 !netdev_has_upper_dev(slave_dev
, bond_dev
)) {
1828 netdev_dbg(bond_dev
, "cannot release %s\n",
1835 slave
= bond_get_slave_by_dev(bond
, slave_dev
);
1837 /* not a slave of this bond */
1838 netdev_info(bond_dev
, "%s not enslaved\n",
1840 unblock_netpoll_tx();
1844 bond_set_slave_inactive_flags(slave
, BOND_SLAVE_NOTIFY_NOW
);
1846 bond_sysfs_slave_del(slave
);
1848 /* recompute stats just before removing the slave */
1849 bond_get_stats(bond
->dev
, &bond
->bond_stats
);
1851 bond_upper_dev_unlink(bond
, slave
);
1852 /* unregister rx_handler early so bond_handle_frame wouldn't be called
1853 * for this slave anymore.
1855 netdev_rx_handler_unregister(slave_dev
);
1857 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
1858 bond_3ad_unbind_slave(slave
);
1860 if (bond_mode_uses_xmit_hash(bond
))
1861 bond_update_slave_arr(bond
, slave
);
1863 netdev_info(bond_dev
, "Releasing %s interface %s\n",
1864 bond_is_active_slave(slave
) ? "active" : "backup",
1867 oldcurrent
= rcu_access_pointer(bond
->curr_active_slave
);
1869 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
1871 if (!all
&& (!bond
->params
.fail_over_mac
||
1872 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
)) {
1873 if (ether_addr_equal_64bits(bond_dev
->dev_addr
, slave
->perm_hwaddr
) &&
1874 bond_has_slaves(bond
))
1875 netdev_warn(bond_dev
, "the permanent HWaddr of %s - %pM - is still in use by %s - set the HWaddr of %s to a different address to avoid conflicts\n",
1876 slave_dev
->name
, slave
->perm_hwaddr
,
1877 bond_dev
->name
, slave_dev
->name
);
1880 if (rtnl_dereference(bond
->primary_slave
) == slave
)
1881 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
1883 if (oldcurrent
== slave
)
1884 bond_change_active_slave(bond
, NULL
);
1886 if (bond_is_lb(bond
)) {
1887 /* Must be called only after the slave has been
1888 * detached from the list and the curr_active_slave
1889 * has been cleared (if our_slave == old_current),
1890 * but before a new active slave is selected.
1892 bond_alb_deinit_slave(bond
, slave
);
1896 RCU_INIT_POINTER(bond
->curr_active_slave
, NULL
);
1897 } else if (oldcurrent
== slave
) {
1898 /* Note that we hold RTNL over this sequence, so there
1899 * is no concern that another slave add/remove event
1902 bond_select_active_slave(bond
);
1905 if (!bond_has_slaves(bond
)) {
1906 bond_set_carrier(bond
);
1907 eth_hw_addr_random(bond_dev
);
1910 unblock_netpoll_tx();
1914 if (!bond_has_slaves(bond
)) {
1915 call_netdevice_notifiers(NETDEV_CHANGEADDR
, bond
->dev
);
1916 call_netdevice_notifiers(NETDEV_RELEASE
, bond
->dev
);
1919 bond_compute_features(bond
);
1920 if (!(bond_dev
->features
& NETIF_F_VLAN_CHALLENGED
) &&
1921 (old_features
& NETIF_F_VLAN_CHALLENGED
))
1922 netdev_info(bond_dev
, "last VLAN challenged slave %s left bond %s - VLAN blocking is removed\n",
1923 slave_dev
->name
, bond_dev
->name
);
1925 vlan_vids_del_by_dev(slave_dev
, bond_dev
);
1927 /* If the mode uses primary, then this case was handled above by
1928 * bond_change_active_slave(..., NULL)
1930 if (!bond_uses_primary(bond
)) {
1931 /* unset promiscuity level from slave
1932 * NOTE: The NETDEV_CHANGEADDR call above may change the value
1933 * of the IFF_PROMISC flag in the bond_dev, but we need the
1934 * value of that flag before that change, as that was the value
1935 * when this slave was attached, so we cache at the start of the
1936 * function and use it here. Same goes for ALLMULTI below
1938 if (old_flags
& IFF_PROMISC
)
1939 dev_set_promiscuity(slave_dev
, -1);
1941 /* unset allmulti level from slave */
1942 if (old_flags
& IFF_ALLMULTI
)
1943 dev_set_allmulti(slave_dev
, -1);
1945 bond_hw_addr_flush(bond_dev
, slave_dev
);
1948 slave_disable_netpoll(slave
);
1950 /* close slave before restoring its mac address */
1951 dev_close(slave_dev
);
1953 if (bond
->params
.fail_over_mac
!= BOND_FOM_ACTIVE
||
1954 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1955 /* restore original ("permanent") mac address */
1956 ether_addr_copy(addr
.sa_data
, slave
->perm_hwaddr
);
1957 addr
.sa_family
= slave_dev
->type
;
1958 dev_set_mac_address(slave_dev
, &addr
);
1961 dev_set_mtu(slave_dev
, slave
->original_mtu
);
1963 slave_dev
->priv_flags
&= ~IFF_BONDING
;
1965 bond_free_slave(slave
);
1970 /* A wrapper used because of ndo_del_link */
1971 int bond_release(struct net_device
*bond_dev
, struct net_device
*slave_dev
)
1973 return __bond_release_one(bond_dev
, slave_dev
, false);
1976 /* First release a slave and then destroy the bond if no more slaves are left.
1977 * Must be under rtnl_lock when this function is called.
1979 static int bond_release_and_destroy(struct net_device
*bond_dev
,
1980 struct net_device
*slave_dev
)
1982 struct bonding
*bond
= netdev_priv(bond_dev
);
1985 ret
= bond_release(bond_dev
, slave_dev
);
1986 if (ret
== 0 && !bond_has_slaves(bond
)) {
1987 bond_dev
->priv_flags
|= IFF_DISABLE_NETPOLL
;
1988 netdev_info(bond_dev
, "Destroying bond %s\n",
1990 bond_remove_proc_entry(bond
);
1991 unregister_netdevice(bond_dev
);
1996 static int bond_info_query(struct net_device
*bond_dev
, struct ifbond
*info
)
1998 struct bonding
*bond
= netdev_priv(bond_dev
);
1999 bond_fill_ifbond(bond
, info
);
2003 static int bond_slave_info_query(struct net_device
*bond_dev
, struct ifslave
*info
)
2005 struct bonding
*bond
= netdev_priv(bond_dev
);
2006 struct list_head
*iter
;
2007 int i
= 0, res
= -ENODEV
;
2008 struct slave
*slave
;
2010 bond_for_each_slave(bond
, slave
, iter
) {
2011 if (i
++ == (int)info
->slave_id
) {
2013 bond_fill_ifslave(slave
, info
);
2021 /*-------------------------------- Monitoring -------------------------------*/
2023 /* called with rcu_read_lock() */
2024 static int bond_miimon_inspect(struct bonding
*bond
)
2026 int link_state
, commit
= 0;
2027 struct list_head
*iter
;
2028 struct slave
*slave
;
2029 bool ignore_updelay
;
2031 ignore_updelay
= !rcu_dereference(bond
->curr_active_slave
);
2033 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2034 slave
->new_link
= BOND_LINK_NOCHANGE
;
2036 link_state
= bond_check_dev_link(bond
, slave
->dev
, 0);
2038 switch (slave
->link
) {
2043 bond_set_slave_link_state(slave
, BOND_LINK_FAIL
,
2044 BOND_SLAVE_NOTIFY_LATER
);
2045 slave
->delay
= bond
->params
.downdelay
;
2047 netdev_info(bond
->dev
, "link status down for %sinterface %s, disabling it in %d ms\n",
2049 BOND_MODE_ACTIVEBACKUP
) ?
2050 (bond_is_active_slave(slave
) ?
2051 "active " : "backup ") : "",
2053 bond
->params
.downdelay
* bond
->params
.miimon
);
2056 case BOND_LINK_FAIL
:
2058 /* recovered before downdelay expired */
2059 bond_set_slave_link_state(slave
, BOND_LINK_UP
,
2060 BOND_SLAVE_NOTIFY_LATER
);
2061 slave
->last_link_up
= jiffies
;
2062 netdev_info(bond
->dev
, "link status up again after %d ms for interface %s\n",
2063 (bond
->params
.downdelay
- slave
->delay
) *
2064 bond
->params
.miimon
,
2069 if (slave
->delay
<= 0) {
2070 slave
->new_link
= BOND_LINK_DOWN
;
2078 case BOND_LINK_DOWN
:
2082 bond_set_slave_link_state(slave
, BOND_LINK_BACK
,
2083 BOND_SLAVE_NOTIFY_LATER
);
2084 slave
->delay
= bond
->params
.updelay
;
2087 netdev_info(bond
->dev
, "link status up for interface %s, enabling it in %d ms\n",
2089 ignore_updelay
? 0 :
2090 bond
->params
.updelay
*
2091 bond
->params
.miimon
);
2094 case BOND_LINK_BACK
:
2096 bond_set_slave_link_state(slave
,
2098 BOND_SLAVE_NOTIFY_LATER
);
2099 netdev_info(bond
->dev
, "link status down again after %d ms for interface %s\n",
2100 (bond
->params
.updelay
- slave
->delay
) *
2101 bond
->params
.miimon
,
2110 if (slave
->delay
<= 0) {
2111 slave
->new_link
= BOND_LINK_UP
;
2113 ignore_updelay
= false;
2125 static void bond_miimon_commit(struct bonding
*bond
)
2127 struct list_head
*iter
;
2128 struct slave
*slave
, *primary
;
2130 bond_for_each_slave(bond
, slave
, iter
) {
2131 switch (slave
->new_link
) {
2132 case BOND_LINK_NOCHANGE
:
2136 bond_update_speed_duplex(slave
);
2137 bond_set_slave_link_state(slave
, BOND_LINK_UP
,
2138 BOND_SLAVE_NOTIFY_NOW
);
2139 slave
->last_link_up
= jiffies
;
2141 primary
= rtnl_dereference(bond
->primary_slave
);
2142 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
2143 /* prevent it from being the active one */
2144 bond_set_backup_slave(slave
);
2145 } else if (BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
2146 /* make it immediately active */
2147 bond_set_active_slave(slave
);
2148 } else if (slave
!= primary
) {
2149 /* prevent it from being the active one */
2150 bond_set_backup_slave(slave
);
2153 netdev_info(bond
->dev
, "link status definitely up for interface %s, %u Mbps %s duplex\n",
2155 slave
->speed
== SPEED_UNKNOWN
? 0 : slave
->speed
,
2156 slave
->duplex
? "full" : "half");
2158 /* notify ad that the link status has changed */
2159 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
2160 bond_3ad_handle_link_change(slave
, BOND_LINK_UP
);
2162 if (bond_is_lb(bond
))
2163 bond_alb_handle_link_change(bond
, slave
,
2166 if (BOND_MODE(bond
) == BOND_MODE_XOR
)
2167 bond_update_slave_arr(bond
, NULL
);
2169 if (!bond
->curr_active_slave
|| slave
== primary
)
2174 case BOND_LINK_DOWN
:
2175 if (slave
->link_failure_count
< UINT_MAX
)
2176 slave
->link_failure_count
++;
2178 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
2179 BOND_SLAVE_NOTIFY_NOW
);
2181 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
||
2182 BOND_MODE(bond
) == BOND_MODE_8023AD
)
2183 bond_set_slave_inactive_flags(slave
,
2184 BOND_SLAVE_NOTIFY_NOW
);
2186 netdev_info(bond
->dev
, "link status definitely down for interface %s, disabling it\n",
2189 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
2190 bond_3ad_handle_link_change(slave
,
2193 if (bond_is_lb(bond
))
2194 bond_alb_handle_link_change(bond
, slave
,
2197 if (BOND_MODE(bond
) == BOND_MODE_XOR
)
2198 bond_update_slave_arr(bond
, NULL
);
2200 if (slave
== rcu_access_pointer(bond
->curr_active_slave
))
2206 netdev_err(bond
->dev
, "invalid new link %d on slave %s\n",
2207 slave
->new_link
, slave
->dev
->name
);
2208 slave
->new_link
= BOND_LINK_NOCHANGE
;
2215 bond_select_active_slave(bond
);
2216 unblock_netpoll_tx();
2219 bond_set_carrier(bond
);
2224 * Really a wrapper that splits the mii monitor into two phases: an
2225 * inspection, then (if inspection indicates something needs to be done)
2226 * an acquisition of appropriate locks followed by a commit phase to
2227 * implement whatever link state changes are indicated.
2229 static void bond_mii_monitor(struct work_struct
*work
)
2231 struct bonding
*bond
= container_of(work
, struct bonding
,
2233 bool should_notify_peers
= false;
2234 unsigned long delay
;
2236 delay
= msecs_to_jiffies(bond
->params
.miimon
);
2238 if (!bond_has_slaves(bond
))
2243 should_notify_peers
= bond_should_notify_peers(bond
);
2245 if (bond_miimon_inspect(bond
)) {
2248 /* Race avoidance with bond_close cancel of workqueue */
2249 if (!rtnl_trylock()) {
2251 should_notify_peers
= false;
2255 bond_miimon_commit(bond
);
2257 rtnl_unlock(); /* might sleep, hold no other locks */
2262 if (bond
->params
.miimon
)
2263 queue_delayed_work(bond
->wq
, &bond
->mii_work
, delay
);
2265 if (should_notify_peers
) {
2266 if (!rtnl_trylock())
2268 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
, bond
->dev
);
2273 static bool bond_has_this_ip(struct bonding
*bond
, __be32 ip
)
2275 struct net_device
*upper
;
2276 struct list_head
*iter
;
2279 if (ip
== bond_confirm_addr(bond
->dev
, 0, ip
))
2283 netdev_for_each_all_upper_dev_rcu(bond
->dev
, upper
, iter
) {
2284 if (ip
== bond_confirm_addr(upper
, 0, ip
)) {
2294 /* We go to the (large) trouble of VLAN tagging ARP frames because
2295 * switches in VLAN mode (especially if ports are configured as
2296 * "native" to a VLAN) might not pass non-tagged frames.
2298 static void bond_arp_send(struct net_device
*slave_dev
, int arp_op
,
2299 __be32 dest_ip
, __be32 src_ip
,
2300 struct bond_vlan_tag
*tags
)
2302 struct sk_buff
*skb
;
2303 struct bond_vlan_tag
*outer_tag
= tags
;
2305 netdev_dbg(slave_dev
, "arp %d on slave %s: dst %pI4 src %pI4\n",
2306 arp_op
, slave_dev
->name
, &dest_ip
, &src_ip
);
2308 skb
= arp_create(arp_op
, ETH_P_ARP
, dest_ip
, slave_dev
, src_ip
,
2309 NULL
, slave_dev
->dev_addr
, NULL
);
2312 net_err_ratelimited("ARP packet allocation failed\n");
2316 if (!tags
|| tags
->vlan_proto
== VLAN_N_VID
)
2321 /* Go through all the tags backwards and add them to the packet */
2322 while (tags
->vlan_proto
!= VLAN_N_VID
) {
2323 if (!tags
->vlan_id
) {
2328 netdev_dbg(slave_dev
, "inner tag: proto %X vid %X\n",
2329 ntohs(outer_tag
->vlan_proto
), tags
->vlan_id
);
2330 skb
= vlan_insert_tag_set_proto(skb
, tags
->vlan_proto
,
2333 net_err_ratelimited("failed to insert inner VLAN tag\n");
2339 /* Set the outer tag */
2340 if (outer_tag
->vlan_id
) {
2341 netdev_dbg(slave_dev
, "outer tag: proto %X vid %X\n",
2342 ntohs(outer_tag
->vlan_proto
), outer_tag
->vlan_id
);
2343 __vlan_hwaccel_put_tag(skb
, outer_tag
->vlan_proto
,
2344 outer_tag
->vlan_id
);
2351 /* Validate the device path between the @start_dev and the @end_dev.
2352 * The path is valid if the @end_dev is reachable through device
2354 * When the path is validated, collect any vlan information in the
2357 struct bond_vlan_tag
*bond_verify_device_path(struct net_device
*start_dev
,
2358 struct net_device
*end_dev
,
2361 struct bond_vlan_tag
*tags
;
2362 struct net_device
*upper
;
2363 struct list_head
*iter
;
2365 if (start_dev
== end_dev
) {
2366 tags
= kzalloc(sizeof(*tags
) * (level
+ 1), GFP_ATOMIC
);
2368 return ERR_PTR(-ENOMEM
);
2369 tags
[level
].vlan_proto
= VLAN_N_VID
;
2373 netdev_for_each_upper_dev_rcu(start_dev
, upper
, iter
) {
2374 tags
= bond_verify_device_path(upper
, end_dev
, level
+ 1);
2375 if (IS_ERR_OR_NULL(tags
)) {
2380 if (is_vlan_dev(upper
)) {
2381 tags
[level
].vlan_proto
= vlan_dev_vlan_proto(upper
);
2382 tags
[level
].vlan_id
= vlan_dev_vlan_id(upper
);
2391 static void bond_arp_send_all(struct bonding
*bond
, struct slave
*slave
)
2394 struct bond_vlan_tag
*tags
;
2395 __be32
*targets
= bond
->params
.arp_targets
, addr
;
2398 for (i
= 0; i
< BOND_MAX_ARP_TARGETS
&& targets
[i
]; i
++) {
2399 netdev_dbg(bond
->dev
, "basa: target %pI4\n", &targets
[i
]);
2402 /* Find out through which dev should the packet go */
2403 rt
= ip_route_output(dev_net(bond
->dev
), targets
[i
], 0,
2406 /* there's no route to target - try to send arp
2407 * probe to generate any traffic (arp_validate=0)
2409 if (bond
->params
.arp_validate
)
2410 net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
2413 bond_arp_send(slave
->dev
, ARPOP_REQUEST
, targets
[i
],
2418 /* bond device itself */
2419 if (rt
->dst
.dev
== bond
->dev
)
2423 tags
= bond_verify_device_path(bond
->dev
, rt
->dst
.dev
, 0);
2426 if (!IS_ERR_OR_NULL(tags
))
2429 /* Not our device - skip */
2430 netdev_dbg(bond
->dev
, "no path to arp_ip_target %pI4 via rt.dev %s\n",
2431 &targets
[i
], rt
->dst
.dev
? rt
->dst
.dev
->name
: "NULL");
2437 addr
= bond_confirm_addr(rt
->dst
.dev
, targets
[i
], 0);
2439 bond_arp_send(slave
->dev
, ARPOP_REQUEST
, targets
[i
],
2445 static void bond_validate_arp(struct bonding
*bond
, struct slave
*slave
, __be32 sip
, __be32 tip
)
2449 if (!sip
|| !bond_has_this_ip(bond
, tip
)) {
2450 netdev_dbg(bond
->dev
, "bva: sip %pI4 tip %pI4 not found\n",
2455 i
= bond_get_targets_ip(bond
->params
.arp_targets
, sip
);
2457 netdev_dbg(bond
->dev
, "bva: sip %pI4 not found in targets\n",
2461 slave
->last_rx
= jiffies
;
2462 slave
->target_last_arp_rx
[i
] = jiffies
;
2465 int bond_arp_rcv(const struct sk_buff
*skb
, struct bonding
*bond
,
2466 struct slave
*slave
)
2468 struct arphdr
*arp
= (struct arphdr
*)skb
->data
;
2469 struct slave
*curr_active_slave
, *curr_arp_slave
;
2470 unsigned char *arp_ptr
;
2472 int alen
, is_arp
= skb
->protocol
== __cpu_to_be16(ETH_P_ARP
);
2474 if (!slave_do_arp_validate(bond
, slave
)) {
2475 if ((slave_do_arp_validate_only(bond
) && is_arp
) ||
2476 !slave_do_arp_validate_only(bond
))
2477 slave
->last_rx
= jiffies
;
2478 return RX_HANDLER_ANOTHER
;
2479 } else if (!is_arp
) {
2480 return RX_HANDLER_ANOTHER
;
2483 alen
= arp_hdr_len(bond
->dev
);
2485 netdev_dbg(bond
->dev
, "bond_arp_rcv: skb->dev %s\n",
2488 if (alen
> skb_headlen(skb
)) {
2489 arp
= kmalloc(alen
, GFP_ATOMIC
);
2492 if (skb_copy_bits(skb
, 0, arp
, alen
) < 0)
2496 if (arp
->ar_hln
!= bond
->dev
->addr_len
||
2497 skb
->pkt_type
== PACKET_OTHERHOST
||
2498 skb
->pkt_type
== PACKET_LOOPBACK
||
2499 arp
->ar_hrd
!= htons(ARPHRD_ETHER
) ||
2500 arp
->ar_pro
!= htons(ETH_P_IP
) ||
2504 arp_ptr
= (unsigned char *)(arp
+ 1);
2505 arp_ptr
+= bond
->dev
->addr_len
;
2506 memcpy(&sip
, arp_ptr
, 4);
2507 arp_ptr
+= 4 + bond
->dev
->addr_len
;
2508 memcpy(&tip
, arp_ptr
, 4);
2510 netdev_dbg(bond
->dev
, "bond_arp_rcv: %s/%d av %d sv %d sip %pI4 tip %pI4\n",
2511 slave
->dev
->name
, bond_slave_state(slave
),
2512 bond
->params
.arp_validate
, slave_do_arp_validate(bond
, slave
),
2515 curr_active_slave
= rcu_dereference(bond
->curr_active_slave
);
2516 curr_arp_slave
= rcu_dereference(bond
->current_arp_slave
);
2518 /* We 'trust' the received ARP enough to validate it if:
2520 * (a) the slave receiving the ARP is active (which includes the
2521 * current ARP slave, if any), or
2523 * (b) the receiving slave isn't active, but there is a currently
2524 * active slave and it received valid arp reply(s) after it became
2525 * the currently active slave, or
2527 * (c) there is an ARP slave that sent an ARP during the prior ARP
2528 * interval, and we receive an ARP reply on any slave. We accept
2529 * these because switch FDB update delays may deliver the ARP
2530 * reply to a slave other than the sender of the ARP request.
2532 * Note: for (b), backup slaves are receiving the broadcast ARP
2533 * request, not a reply. This request passes from the sending
2534 * slave through the L2 switch(es) to the receiving slave. Since
2535 * this is checking the request, sip/tip are swapped for
2538 * This is done to avoid endless looping when we can't reach the
2539 * arp_ip_target and fool ourselves with our own arp requests.
2541 if (bond_is_active_slave(slave
))
2542 bond_validate_arp(bond
, slave
, sip
, tip
);
2543 else if (curr_active_slave
&&
2544 time_after(slave_last_rx(bond
, curr_active_slave
),
2545 curr_active_slave
->last_link_up
))
2546 bond_validate_arp(bond
, slave
, tip
, sip
);
2547 else if (curr_arp_slave
&& (arp
->ar_op
== htons(ARPOP_REPLY
)) &&
2548 bond_time_in_interval(bond
,
2549 dev_trans_start(curr_arp_slave
->dev
), 1))
2550 bond_validate_arp(bond
, slave
, sip
, tip
);
2553 if (arp
!= (struct arphdr
*)skb
->data
)
2555 return RX_HANDLER_ANOTHER
;
2558 /* function to verify if we're in the arp_interval timeslice, returns true if
2559 * (last_act - arp_interval) <= jiffies <= (last_act + mod * arp_interval +
2560 * arp_interval/2) . the arp_interval/2 is needed for really fast networks.
2562 static bool bond_time_in_interval(struct bonding
*bond
, unsigned long last_act
,
2565 int delta_in_ticks
= msecs_to_jiffies(bond
->params
.arp_interval
);
2567 return time_in_range(jiffies
,
2568 last_act
- delta_in_ticks
,
2569 last_act
+ mod
* delta_in_ticks
+ delta_in_ticks
/2);
2572 /* This function is called regularly to monitor each slave's link
2573 * ensuring that traffic is being sent and received when arp monitoring
2574 * is used in load-balancing mode. if the adapter has been dormant, then an
2575 * arp is transmitted to generate traffic. see activebackup_arp_monitor for
2576 * arp monitoring in active backup mode.
2578 static void bond_loadbalance_arp_mon(struct work_struct
*work
)
2580 struct bonding
*bond
= container_of(work
, struct bonding
,
2582 struct slave
*slave
, *oldcurrent
;
2583 struct list_head
*iter
;
2584 int do_failover
= 0, slave_state_changed
= 0;
2586 if (!bond_has_slaves(bond
))
2591 oldcurrent
= rcu_dereference(bond
->curr_active_slave
);
2592 /* see if any of the previous devices are up now (i.e. they have
2593 * xmt and rcv traffic). the curr_active_slave does not come into
2594 * the picture unless it is null. also, slave->last_link_up is not
2595 * needed here because we send an arp on each slave and give a slave
2596 * as long as it needs to get the tx/rx within the delta.
2597 * TODO: what about up/down delay in arp mode? it wasn't here before
2600 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2601 unsigned long trans_start
= dev_trans_start(slave
->dev
);
2603 if (slave
->link
!= BOND_LINK_UP
) {
2604 if (bond_time_in_interval(bond
, trans_start
, 1) &&
2605 bond_time_in_interval(bond
, slave
->last_rx
, 1)) {
2607 slave
->link
= BOND_LINK_UP
;
2608 slave_state_changed
= 1;
2610 /* primary_slave has no meaning in round-robin
2611 * mode. the window of a slave being up and
2612 * curr_active_slave being null after enslaving
2616 netdev_info(bond
->dev
, "link status definitely up for interface %s\n",
2620 netdev_info(bond
->dev
, "interface %s is now up\n",
2625 /* slave->link == BOND_LINK_UP */
2627 /* not all switches will respond to an arp request
2628 * when the source ip is 0, so don't take the link down
2629 * if we don't know our ip yet
2631 if (!bond_time_in_interval(bond
, trans_start
, 2) ||
2632 !bond_time_in_interval(bond
, slave
->last_rx
, 2)) {
2634 slave
->link
= BOND_LINK_DOWN
;
2635 slave_state_changed
= 1;
2637 if (slave
->link_failure_count
< UINT_MAX
)
2638 slave
->link_failure_count
++;
2640 netdev_info(bond
->dev
, "interface %s is now down\n",
2643 if (slave
== oldcurrent
)
2648 /* note: if switch is in round-robin mode, all links
2649 * must tx arp to ensure all links rx an arp - otherwise
2650 * links may oscillate or not come up at all; if switch is
2651 * in something like xor mode, there is nothing we can
2652 * do - all replies will be rx'ed on same link causing slaves
2653 * to be unstable during low/no traffic periods
2655 if (bond_slave_is_up(slave
))
2656 bond_arp_send_all(bond
, slave
);
2661 if (do_failover
|| slave_state_changed
) {
2662 if (!rtnl_trylock())
2665 if (slave_state_changed
) {
2666 bond_slave_state_change(bond
);
2667 if (BOND_MODE(bond
) == BOND_MODE_XOR
)
2668 bond_update_slave_arr(bond
, NULL
);
2672 bond_select_active_slave(bond
);
2673 unblock_netpoll_tx();
2679 if (bond
->params
.arp_interval
)
2680 queue_delayed_work(bond
->wq
, &bond
->arp_work
,
2681 msecs_to_jiffies(bond
->params
.arp_interval
));
2684 /* Called to inspect slaves for active-backup mode ARP monitor link state
2685 * changes. Sets new_link in slaves to specify what action should take
2686 * place for the slave. Returns 0 if no changes are found, >0 if changes
2687 * to link states must be committed.
2689 * Called with rcu_read_lock held.
2691 static int bond_ab_arp_inspect(struct bonding
*bond
)
2693 unsigned long trans_start
, last_rx
;
2694 struct list_head
*iter
;
2695 struct slave
*slave
;
2698 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2699 slave
->new_link
= BOND_LINK_NOCHANGE
;
2700 last_rx
= slave_last_rx(bond
, slave
);
2702 if (slave
->link
!= BOND_LINK_UP
) {
2703 if (bond_time_in_interval(bond
, last_rx
, 1)) {
2704 slave
->new_link
= BOND_LINK_UP
;
2710 /* Give slaves 2*delta after being enslaved or made
2711 * active. This avoids bouncing, as the last receive
2712 * times need a full ARP monitor cycle to be updated.
2714 if (bond_time_in_interval(bond
, slave
->last_link_up
, 2))
2717 /* Backup slave is down if:
2718 * - No current_arp_slave AND
2719 * - more than 3*delta since last receive AND
2720 * - the bond has an IP address
2722 * Note: a non-null current_arp_slave indicates
2723 * the curr_active_slave went down and we are
2724 * searching for a new one; under this condition
2725 * we only take the curr_active_slave down - this
2726 * gives each slave a chance to tx/rx traffic
2727 * before being taken out
2729 if (!bond_is_active_slave(slave
) &&
2730 !rcu_access_pointer(bond
->current_arp_slave
) &&
2731 !bond_time_in_interval(bond
, last_rx
, 3)) {
2732 slave
->new_link
= BOND_LINK_DOWN
;
2736 /* Active slave is down if:
2737 * - more than 2*delta since transmitting OR
2738 * - (more than 2*delta since receive AND
2739 * the bond has an IP address)
2741 trans_start
= dev_trans_start(slave
->dev
);
2742 if (bond_is_active_slave(slave
) &&
2743 (!bond_time_in_interval(bond
, trans_start
, 2) ||
2744 !bond_time_in_interval(bond
, last_rx
, 2))) {
2745 slave
->new_link
= BOND_LINK_DOWN
;
2753 /* Called to commit link state changes noted by inspection step of
2754 * active-backup mode ARP monitor.
2756 * Called with RTNL hold.
2758 static void bond_ab_arp_commit(struct bonding
*bond
)
2760 unsigned long trans_start
;
2761 struct list_head
*iter
;
2762 struct slave
*slave
;
2764 bond_for_each_slave(bond
, slave
, iter
) {
2765 switch (slave
->new_link
) {
2766 case BOND_LINK_NOCHANGE
:
2770 trans_start
= dev_trans_start(slave
->dev
);
2771 if (rtnl_dereference(bond
->curr_active_slave
) != slave
||
2772 (!rtnl_dereference(bond
->curr_active_slave
) &&
2773 bond_time_in_interval(bond
, trans_start
, 1))) {
2774 struct slave
*current_arp_slave
;
2776 current_arp_slave
= rtnl_dereference(bond
->current_arp_slave
);
2777 bond_set_slave_link_state(slave
, BOND_LINK_UP
,
2778 BOND_SLAVE_NOTIFY_NOW
);
2779 if (current_arp_slave
) {
2780 bond_set_slave_inactive_flags(
2782 BOND_SLAVE_NOTIFY_NOW
);
2783 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
2786 netdev_info(bond
->dev
, "link status definitely up for interface %s\n",
2789 if (!rtnl_dereference(bond
->curr_active_slave
) ||
2790 slave
== rtnl_dereference(bond
->primary_slave
))
2797 case BOND_LINK_DOWN
:
2798 if (slave
->link_failure_count
< UINT_MAX
)
2799 slave
->link_failure_count
++;
2801 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
2802 BOND_SLAVE_NOTIFY_NOW
);
2803 bond_set_slave_inactive_flags(slave
,
2804 BOND_SLAVE_NOTIFY_NOW
);
2806 netdev_info(bond
->dev
, "link status definitely down for interface %s, disabling it\n",
2809 if (slave
== rtnl_dereference(bond
->curr_active_slave
)) {
2810 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
2817 netdev_err(bond
->dev
, "impossible: new_link %d on slave %s\n",
2818 slave
->new_link
, slave
->dev
->name
);
2824 bond_select_active_slave(bond
);
2825 unblock_netpoll_tx();
2828 bond_set_carrier(bond
);
2831 /* Send ARP probes for active-backup mode ARP monitor.
2833 * Called with rcu_read_lock held.
2835 static bool bond_ab_arp_probe(struct bonding
*bond
)
2837 struct slave
*slave
, *before
= NULL
, *new_slave
= NULL
,
2838 *curr_arp_slave
= rcu_dereference(bond
->current_arp_slave
),
2839 *curr_active_slave
= rcu_dereference(bond
->curr_active_slave
);
2840 struct list_head
*iter
;
2842 bool should_notify_rtnl
= BOND_SLAVE_NOTIFY_LATER
;
2844 if (curr_arp_slave
&& curr_active_slave
)
2845 netdev_info(bond
->dev
, "PROBE: c_arp %s && cas %s BAD\n",
2846 curr_arp_slave
->dev
->name
,
2847 curr_active_slave
->dev
->name
);
2849 if (curr_active_slave
) {
2850 bond_arp_send_all(bond
, curr_active_slave
);
2851 return should_notify_rtnl
;
2854 /* if we don't have a curr_active_slave, search for the next available
2855 * backup slave from the current_arp_slave and make it the candidate
2856 * for becoming the curr_active_slave
2859 if (!curr_arp_slave
) {
2860 curr_arp_slave
= bond_first_slave_rcu(bond
);
2861 if (!curr_arp_slave
)
2862 return should_notify_rtnl
;
2865 bond_set_slave_inactive_flags(curr_arp_slave
, BOND_SLAVE_NOTIFY_LATER
);
2867 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2868 if (!found
&& !before
&& bond_slave_is_up(slave
))
2871 if (found
&& !new_slave
&& bond_slave_is_up(slave
))
2873 /* if the link state is up at this point, we
2874 * mark it down - this can happen if we have
2875 * simultaneous link failures and
2876 * reselect_active_interface doesn't make this
2877 * one the current slave so it is still marked
2878 * up when it is actually down
2880 if (!bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
) {
2881 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
2882 BOND_SLAVE_NOTIFY_LATER
);
2883 if (slave
->link_failure_count
< UINT_MAX
)
2884 slave
->link_failure_count
++;
2886 bond_set_slave_inactive_flags(slave
,
2887 BOND_SLAVE_NOTIFY_LATER
);
2889 netdev_info(bond
->dev
, "backup interface %s is now down\n",
2892 if (slave
== curr_arp_slave
)
2896 if (!new_slave
&& before
)
2902 bond_set_slave_link_state(new_slave
, BOND_LINK_BACK
,
2903 BOND_SLAVE_NOTIFY_LATER
);
2904 bond_set_slave_active_flags(new_slave
, BOND_SLAVE_NOTIFY_LATER
);
2905 bond_arp_send_all(bond
, new_slave
);
2906 new_slave
->last_link_up
= jiffies
;
2907 rcu_assign_pointer(bond
->current_arp_slave
, new_slave
);
2910 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2911 if (slave
->should_notify
|| slave
->should_notify_link
) {
2912 should_notify_rtnl
= BOND_SLAVE_NOTIFY_NOW
;
2916 return should_notify_rtnl
;
2919 static void bond_activebackup_arp_mon(struct work_struct
*work
)
2921 struct bonding
*bond
= container_of(work
, struct bonding
,
2923 bool should_notify_peers
= false;
2924 bool should_notify_rtnl
= false;
2927 delta_in_ticks
= msecs_to_jiffies(bond
->params
.arp_interval
);
2929 if (!bond_has_slaves(bond
))
2934 should_notify_peers
= bond_should_notify_peers(bond
);
2936 if (bond_ab_arp_inspect(bond
)) {
2939 /* Race avoidance with bond_close flush of workqueue */
2940 if (!rtnl_trylock()) {
2942 should_notify_peers
= false;
2946 bond_ab_arp_commit(bond
);
2952 should_notify_rtnl
= bond_ab_arp_probe(bond
);
2956 if (bond
->params
.arp_interval
)
2957 queue_delayed_work(bond
->wq
, &bond
->arp_work
, delta_in_ticks
);
2959 if (should_notify_peers
|| should_notify_rtnl
) {
2960 if (!rtnl_trylock())
2963 if (should_notify_peers
)
2964 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
,
2966 if (should_notify_rtnl
) {
2967 bond_slave_state_notify(bond
);
2968 bond_slave_link_notify(bond
);
2975 /*-------------------------- netdev event handling --------------------------*/
2977 /* Change device name */
2978 static int bond_event_changename(struct bonding
*bond
)
2980 bond_remove_proc_entry(bond
);
2981 bond_create_proc_entry(bond
);
2983 bond_debug_reregister(bond
);
2988 static int bond_master_netdev_event(unsigned long event
,
2989 struct net_device
*bond_dev
)
2991 struct bonding
*event_bond
= netdev_priv(bond_dev
);
2994 case NETDEV_CHANGENAME
:
2995 return bond_event_changename(event_bond
);
2996 case NETDEV_UNREGISTER
:
2997 bond_remove_proc_entry(event_bond
);
2999 case NETDEV_REGISTER
:
3000 bond_create_proc_entry(event_bond
);
3002 case NETDEV_NOTIFY_PEERS
:
3003 if (event_bond
->send_peer_notif
)
3004 event_bond
->send_peer_notif
--;
3013 static int bond_slave_netdev_event(unsigned long event
,
3014 struct net_device
*slave_dev
)
3016 struct slave
*slave
= bond_slave_get_rtnl(slave_dev
), *primary
;
3017 struct bonding
*bond
;
3018 struct net_device
*bond_dev
;
3020 /* A netdev event can be generated while enslaving a device
3021 * before netdev_rx_handler_register is called in which case
3022 * slave will be NULL
3026 bond_dev
= slave
->bond
->dev
;
3028 primary
= rtnl_dereference(bond
->primary_slave
);
3031 case NETDEV_UNREGISTER
:
3032 if (bond_dev
->type
!= ARPHRD_ETHER
)
3033 bond_release_and_destroy(bond_dev
, slave_dev
);
3035 bond_release(bond_dev
, slave_dev
);
3039 bond_update_speed_duplex(slave
);
3040 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
3041 bond_3ad_adapter_speed_duplex_changed(slave
);
3044 /* Refresh slave-array if applicable!
3045 * If the setup does not use miimon or arpmon (mode-specific!),
3046 * then these events will not cause the slave-array to be
3047 * refreshed. This will cause xmit to use a slave that is not
3048 * usable. Avoid such situation by refeshing the array at these
3049 * events. If these (miimon/arpmon) parameters are configured
3050 * then array gets refreshed twice and that should be fine!
3052 if (bond_mode_uses_xmit_hash(bond
))
3053 bond_update_slave_arr(bond
, NULL
);
3055 case NETDEV_CHANGEMTU
:
3056 /* TODO: Should slaves be allowed to
3057 * independently alter their MTU? For
3058 * an active-backup bond, slaves need
3059 * not be the same type of device, so
3060 * MTUs may vary. For other modes,
3061 * slaves arguably should have the
3062 * same MTUs. To do this, we'd need to
3063 * take over the slave's change_mtu
3064 * function for the duration of their
3068 case NETDEV_CHANGENAME
:
3069 /* we don't care if we don't have primary set */
3070 if (!bond_uses_primary(bond
) ||
3071 !bond
->params
.primary
[0])
3074 if (slave
== primary
) {
3075 /* slave's name changed - he's no longer primary */
3076 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
3077 } else if (!strcmp(slave_dev
->name
, bond
->params
.primary
)) {
3078 /* we have a new primary slave */
3079 rcu_assign_pointer(bond
->primary_slave
, slave
);
3080 } else { /* we didn't change primary - exit */
3084 netdev_info(bond
->dev
, "Primary slave changed to %s, reselecting active slave\n",
3085 primary
? slave_dev
->name
: "none");
3088 bond_select_active_slave(bond
);
3089 unblock_netpoll_tx();
3091 case NETDEV_FEAT_CHANGE
:
3092 bond_compute_features(bond
);
3094 case NETDEV_RESEND_IGMP
:
3095 /* Propagate to master device */
3096 call_netdevice_notifiers(event
, slave
->bond
->dev
);
3105 /* bond_netdev_event: handle netdev notifier chain events.
3107 * This function receives events for the netdev chain. The caller (an
3108 * ioctl handler calling blocking_notifier_call_chain) holds the necessary
3109 * locks for us to safely manipulate the slave devices (RTNL lock,
3112 static int bond_netdev_event(struct notifier_block
*this,
3113 unsigned long event
, void *ptr
)
3115 struct net_device
*event_dev
= netdev_notifier_info_to_dev(ptr
);
3117 netdev_dbg(event_dev
, "event: %lx\n", event
);
3119 if (!(event_dev
->priv_flags
& IFF_BONDING
))
3122 if (event_dev
->flags
& IFF_MASTER
) {
3123 netdev_dbg(event_dev
, "IFF_MASTER\n");
3124 return bond_master_netdev_event(event
, event_dev
);
3127 if (event_dev
->flags
& IFF_SLAVE
) {
3128 netdev_dbg(event_dev
, "IFF_SLAVE\n");
3129 return bond_slave_netdev_event(event
, event_dev
);
3135 static struct notifier_block bond_netdev_notifier
= {
3136 .notifier_call
= bond_netdev_event
,
3139 /*---------------------------- Hashing Policies -----------------------------*/
3141 /* L2 hash helper */
3142 static inline u32
bond_eth_hash(struct sk_buff
*skb
)
3144 struct ethhdr
*ep
, hdr_tmp
;
3146 ep
= skb_header_pointer(skb
, 0, sizeof(hdr_tmp
), &hdr_tmp
);
3148 return ep
->h_dest
[5] ^ ep
->h_source
[5] ^ ep
->h_proto
;
3152 /* Extract the appropriate headers based on bond's xmit policy */
3153 static bool bond_flow_dissect(struct bonding
*bond
, struct sk_buff
*skb
,
3154 struct flow_keys
*fk
)
3156 const struct ipv6hdr
*iph6
;
3157 const struct iphdr
*iph
;
3158 int noff
, proto
= -1;
3160 if (bond
->params
.xmit_policy
> BOND_XMIT_POLICY_LAYER23
)
3161 return skb_flow_dissect_flow_keys(skb
, fk
, 0);
3163 fk
->ports
.ports
= 0;
3164 noff
= skb_network_offset(skb
);
3165 if (skb
->protocol
== htons(ETH_P_IP
)) {
3166 if (unlikely(!pskb_may_pull(skb
, noff
+ sizeof(*iph
))))
3169 iph_to_flow_copy_v4addrs(fk
, iph
);
3170 noff
+= iph
->ihl
<< 2;
3171 if (!ip_is_fragment(iph
))
3172 proto
= iph
->protocol
;
3173 } else if (skb
->protocol
== htons(ETH_P_IPV6
)) {
3174 if (unlikely(!pskb_may_pull(skb
, noff
+ sizeof(*iph6
))))
3176 iph6
= ipv6_hdr(skb
);
3177 iph_to_flow_copy_v6addrs(fk
, iph6
);
3178 noff
+= sizeof(*iph6
);
3179 proto
= iph6
->nexthdr
;
3183 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER34
&& proto
>= 0)
3184 fk
->ports
.ports
= skb_flow_get_ports(skb
, noff
, proto
);
3190 * bond_xmit_hash - generate a hash value based on the xmit policy
3191 * @bond: bonding device
3192 * @skb: buffer to use for headers
3194 * This function will extract the necessary headers from the skb buffer and use
3195 * them to generate a hash based on the xmit_policy set in the bonding device
3197 u32
bond_xmit_hash(struct bonding
*bond
, struct sk_buff
*skb
)
3199 struct flow_keys flow
;
3202 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_ENCAP34
&&
3206 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER2
||
3207 !bond_flow_dissect(bond
, skb
, &flow
))
3208 return bond_eth_hash(skb
);
3210 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER23
||
3211 bond
->params
.xmit_policy
== BOND_XMIT_POLICY_ENCAP23
)
3212 hash
= bond_eth_hash(skb
);
3214 hash
= (__force u32
)flow
.ports
.ports
;
3215 hash
^= (__force u32
)flow_get_u32_dst(&flow
) ^
3216 (__force u32
)flow_get_u32_src(&flow
);
3217 hash
^= (hash
>> 16);
3218 hash
^= (hash
>> 8);
3223 /*-------------------------- Device entry points ----------------------------*/
3225 static void bond_work_init_all(struct bonding
*bond
)
3227 INIT_DELAYED_WORK(&bond
->mcast_work
,
3228 bond_resend_igmp_join_requests_delayed
);
3229 INIT_DELAYED_WORK(&bond
->alb_work
, bond_alb_monitor
);
3230 INIT_DELAYED_WORK(&bond
->mii_work
, bond_mii_monitor
);
3231 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
)
3232 INIT_DELAYED_WORK(&bond
->arp_work
, bond_activebackup_arp_mon
);
3234 INIT_DELAYED_WORK(&bond
->arp_work
, bond_loadbalance_arp_mon
);
3235 INIT_DELAYED_WORK(&bond
->ad_work
, bond_3ad_state_machine_handler
);
3236 INIT_DELAYED_WORK(&bond
->slave_arr_work
, bond_slave_arr_handler
);
3239 static void bond_work_cancel_all(struct bonding
*bond
)
3241 cancel_delayed_work_sync(&bond
->mii_work
);
3242 cancel_delayed_work_sync(&bond
->arp_work
);
3243 cancel_delayed_work_sync(&bond
->alb_work
);
3244 cancel_delayed_work_sync(&bond
->ad_work
);
3245 cancel_delayed_work_sync(&bond
->mcast_work
);
3246 cancel_delayed_work_sync(&bond
->slave_arr_work
);
3249 static int bond_open(struct net_device
*bond_dev
)
3251 struct bonding
*bond
= netdev_priv(bond_dev
);
3252 struct list_head
*iter
;
3253 struct slave
*slave
;
3255 /* reset slave->backup and slave->inactive */
3256 if (bond_has_slaves(bond
)) {
3257 bond_for_each_slave(bond
, slave
, iter
) {
3258 if (bond_uses_primary(bond
) &&
3259 slave
!= rcu_access_pointer(bond
->curr_active_slave
)) {
3260 bond_set_slave_inactive_flags(slave
,
3261 BOND_SLAVE_NOTIFY_NOW
);
3262 } else if (BOND_MODE(bond
) != BOND_MODE_8023AD
) {
3263 bond_set_slave_active_flags(slave
,
3264 BOND_SLAVE_NOTIFY_NOW
);
3269 bond_work_init_all(bond
);
3271 if (bond_is_lb(bond
)) {
3272 /* bond_alb_initialize must be called before the timer
3275 if (bond_alb_initialize(bond
, (BOND_MODE(bond
) == BOND_MODE_ALB
)))
3277 if (bond
->params
.tlb_dynamic_lb
)
3278 queue_delayed_work(bond
->wq
, &bond
->alb_work
, 0);
3281 if (bond
->params
.miimon
) /* link check interval, in milliseconds. */
3282 queue_delayed_work(bond
->wq
, &bond
->mii_work
, 0);
3284 if (bond
->params
.arp_interval
) { /* arp interval, in milliseconds. */
3285 queue_delayed_work(bond
->wq
, &bond
->arp_work
, 0);
3286 bond
->recv_probe
= bond_arp_rcv
;
3289 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
3290 queue_delayed_work(bond
->wq
, &bond
->ad_work
, 0);
3291 /* register to receive LACPDUs */
3292 bond
->recv_probe
= bond_3ad_lacpdu_recv
;
3293 bond_3ad_initiate_agg_selection(bond
, 1);
3296 if (bond_mode_uses_xmit_hash(bond
))
3297 bond_update_slave_arr(bond
, NULL
);
3302 static int bond_close(struct net_device
*bond_dev
)
3304 struct bonding
*bond
= netdev_priv(bond_dev
);
3306 bond_work_cancel_all(bond
);
3307 bond
->send_peer_notif
= 0;
3308 if (bond_is_lb(bond
))
3309 bond_alb_deinitialize(bond
);
3310 bond
->recv_probe
= NULL
;
3315 /* fold stats, assuming all rtnl_link_stats64 fields are u64, but
3316 * that some drivers can provide 32bit values only.
3318 static void bond_fold_stats(struct rtnl_link_stats64
*_res
,
3319 const struct rtnl_link_stats64
*_new
,
3320 const struct rtnl_link_stats64
*_old
)
3322 const u64
*new = (const u64
*)_new
;
3323 const u64
*old
= (const u64
*)_old
;
3324 u64
*res
= (u64
*)_res
;
3327 for (i
= 0; i
< sizeof(*_res
) / sizeof(u64
); i
++) {
3331 /* detects if this particular field is 32bit only */
3332 if (((nv
| ov
) >> 32) == 0)
3333 res
[i
] += (u32
)nv
- (u32
)ov
;
3339 static struct rtnl_link_stats64
*bond_get_stats(struct net_device
*bond_dev
,
3340 struct rtnl_link_stats64
*stats
)
3342 struct bonding
*bond
= netdev_priv(bond_dev
);
3343 struct rtnl_link_stats64 temp
;
3344 struct list_head
*iter
;
3345 struct slave
*slave
;
3347 spin_lock(&bond
->stats_lock
);
3348 memcpy(stats
, &bond
->bond_stats
, sizeof(*stats
));
3351 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3352 const struct rtnl_link_stats64
*new =
3353 dev_get_stats(slave
->dev
, &temp
);
3355 bond_fold_stats(stats
, new, &slave
->slave_stats
);
3357 /* save off the slave stats for the next run */
3358 memcpy(&slave
->slave_stats
, new, sizeof(*new));
3362 memcpy(&bond
->bond_stats
, stats
, sizeof(*stats
));
3363 spin_unlock(&bond
->stats_lock
);
3368 static int bond_do_ioctl(struct net_device
*bond_dev
, struct ifreq
*ifr
, int cmd
)
3370 struct bonding
*bond
= netdev_priv(bond_dev
);
3371 struct net_device
*slave_dev
= NULL
;
3372 struct ifbond k_binfo
;
3373 struct ifbond __user
*u_binfo
= NULL
;
3374 struct ifslave k_sinfo
;
3375 struct ifslave __user
*u_sinfo
= NULL
;
3376 struct mii_ioctl_data
*mii
= NULL
;
3377 struct bond_opt_value newval
;
3381 netdev_dbg(bond_dev
, "bond_ioctl: cmd=%d\n", cmd
);
3392 /* We do this again just in case we were called by SIOCGMIIREG
3393 * instead of SIOCGMIIPHY.
3399 if (mii
->reg_num
== 1) {
3401 if (netif_carrier_ok(bond
->dev
))
3402 mii
->val_out
= BMSR_LSTATUS
;
3406 case BOND_INFO_QUERY_OLD
:
3407 case SIOCBONDINFOQUERY
:
3408 u_binfo
= (struct ifbond __user
*)ifr
->ifr_data
;
3410 if (copy_from_user(&k_binfo
, u_binfo
, sizeof(ifbond
)))
3413 res
= bond_info_query(bond_dev
, &k_binfo
);
3415 copy_to_user(u_binfo
, &k_binfo
, sizeof(ifbond
)))
3419 case BOND_SLAVE_INFO_QUERY_OLD
:
3420 case SIOCBONDSLAVEINFOQUERY
:
3421 u_sinfo
= (struct ifslave __user
*)ifr
->ifr_data
;
3423 if (copy_from_user(&k_sinfo
, u_sinfo
, sizeof(ifslave
)))
3426 res
= bond_slave_info_query(bond_dev
, &k_sinfo
);
3428 copy_to_user(u_sinfo
, &k_sinfo
, sizeof(ifslave
)))
3436 net
= dev_net(bond_dev
);
3438 if (!ns_capable(net
->user_ns
, CAP_NET_ADMIN
))
3441 slave_dev
= __dev_get_by_name(net
, ifr
->ifr_slave
);
3443 netdev_dbg(bond_dev
, "slave_dev=%p:\n", slave_dev
);
3448 netdev_dbg(bond_dev
, "slave_dev->name=%s:\n", slave_dev
->name
);
3450 case BOND_ENSLAVE_OLD
:
3451 case SIOCBONDENSLAVE
:
3452 res
= bond_enslave(bond_dev
, slave_dev
);
3454 case BOND_RELEASE_OLD
:
3455 case SIOCBONDRELEASE
:
3456 res
= bond_release(bond_dev
, slave_dev
);
3458 case BOND_SETHWADDR_OLD
:
3459 case SIOCBONDSETHWADDR
:
3460 bond_set_dev_addr(bond_dev
, slave_dev
);
3463 case BOND_CHANGE_ACTIVE_OLD
:
3464 case SIOCBONDCHANGEACTIVE
:
3465 bond_opt_initstr(&newval
, slave_dev
->name
);
3466 res
= __bond_opt_set(bond
, BOND_OPT_ACTIVE_SLAVE
, &newval
);
3475 static void bond_change_rx_flags(struct net_device
*bond_dev
, int change
)
3477 struct bonding
*bond
= netdev_priv(bond_dev
);
3479 if (change
& IFF_PROMISC
)
3480 bond_set_promiscuity(bond
,
3481 bond_dev
->flags
& IFF_PROMISC
? 1 : -1);
3483 if (change
& IFF_ALLMULTI
)
3484 bond_set_allmulti(bond
,
3485 bond_dev
->flags
& IFF_ALLMULTI
? 1 : -1);
3488 static void bond_set_rx_mode(struct net_device
*bond_dev
)
3490 struct bonding
*bond
= netdev_priv(bond_dev
);
3491 struct list_head
*iter
;
3492 struct slave
*slave
;
3495 if (bond_uses_primary(bond
)) {
3496 slave
= rcu_dereference(bond
->curr_active_slave
);
3498 dev_uc_sync(slave
->dev
, bond_dev
);
3499 dev_mc_sync(slave
->dev
, bond_dev
);
3502 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3503 dev_uc_sync_multiple(slave
->dev
, bond_dev
);
3504 dev_mc_sync_multiple(slave
->dev
, bond_dev
);
3510 static int bond_neigh_init(struct neighbour
*n
)
3512 struct bonding
*bond
= netdev_priv(n
->dev
);
3513 const struct net_device_ops
*slave_ops
;
3514 struct neigh_parms parms
;
3515 struct slave
*slave
;
3518 slave
= bond_first_slave(bond
);
3521 slave_ops
= slave
->dev
->netdev_ops
;
3522 if (!slave_ops
->ndo_neigh_setup
)
3525 parms
.neigh_setup
= NULL
;
3526 parms
.neigh_cleanup
= NULL
;
3527 ret
= slave_ops
->ndo_neigh_setup(slave
->dev
, &parms
);
3531 /* Assign slave's neigh_cleanup to neighbour in case cleanup is called
3532 * after the last slave has been detached. Assumes that all slaves
3533 * utilize the same neigh_cleanup (true at this writing as only user
3536 n
->parms
->neigh_cleanup
= parms
.neigh_cleanup
;
3538 if (!parms
.neigh_setup
)
3541 return parms
.neigh_setup(n
);
3544 /* The bonding ndo_neigh_setup is called at init time beofre any
3545 * slave exists. So we must declare proxy setup function which will
3546 * be used at run time to resolve the actual slave neigh param setup.
3548 * It's also called by master devices (such as vlans) to setup their
3549 * underlying devices. In that case - do nothing, we're already set up from
3552 static int bond_neigh_setup(struct net_device
*dev
,
3553 struct neigh_parms
*parms
)
3555 /* modify only our neigh_parms */
3556 if (parms
->dev
== dev
)
3557 parms
->neigh_setup
= bond_neigh_init
;
3562 /* Change the MTU of all of a master's slaves to match the master */
3563 static int bond_change_mtu(struct net_device
*bond_dev
, int new_mtu
)
3565 struct bonding
*bond
= netdev_priv(bond_dev
);
3566 struct slave
*slave
, *rollback_slave
;
3567 struct list_head
*iter
;
3570 netdev_dbg(bond_dev
, "bond=%p, new_mtu=%d\n", bond
, new_mtu
);
3572 bond_for_each_slave(bond
, slave
, iter
) {
3573 netdev_dbg(bond_dev
, "s %p c_m %p\n",
3574 slave
, slave
->dev
->netdev_ops
->ndo_change_mtu
);
3576 res
= dev_set_mtu(slave
->dev
, new_mtu
);
3579 /* If we failed to set the slave's mtu to the new value
3580 * we must abort the operation even in ACTIVE_BACKUP
3581 * mode, because if we allow the backup slaves to have
3582 * different mtu values than the active slave we'll
3583 * need to change their mtu when doing a failover. That
3584 * means changing their mtu from timer context, which
3585 * is probably not a good idea.
3587 netdev_dbg(bond_dev
, "err %d %s\n", res
,
3593 bond_dev
->mtu
= new_mtu
;
3598 /* unwind from head to the slave that failed */
3599 bond_for_each_slave(bond
, rollback_slave
, iter
) {
3602 if (rollback_slave
== slave
)
3605 tmp_res
= dev_set_mtu(rollback_slave
->dev
, bond_dev
->mtu
);
3607 netdev_dbg(bond_dev
, "unwind err %d dev %s\n",
3608 tmp_res
, rollback_slave
->dev
->name
);
3615 /* Change HW address
3617 * Note that many devices must be down to change the HW address, and
3618 * downing the master releases all slaves. We can make bonds full of
3619 * bonding devices to test this, however.
3621 static int bond_set_mac_address(struct net_device
*bond_dev
, void *addr
)
3623 struct bonding
*bond
= netdev_priv(bond_dev
);
3624 struct slave
*slave
, *rollback_slave
;
3625 struct sockaddr
*sa
= addr
, tmp_sa
;
3626 struct list_head
*iter
;
3629 if (BOND_MODE(bond
) == BOND_MODE_ALB
)
3630 return bond_alb_set_mac_address(bond_dev
, addr
);
3633 netdev_dbg(bond_dev
, "bond=%p\n", bond
);
3635 /* If fail_over_mac is enabled, do nothing and return success.
3636 * Returning an error causes ifenslave to fail.
3638 if (bond
->params
.fail_over_mac
&&
3639 BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
)
3642 if (!is_valid_ether_addr(sa
->sa_data
))
3643 return -EADDRNOTAVAIL
;
3645 bond_for_each_slave(bond
, slave
, iter
) {
3646 netdev_dbg(bond_dev
, "slave %p %s\n", slave
, slave
->dev
->name
);
3647 res
= dev_set_mac_address(slave
->dev
, addr
);
3649 /* TODO: consider downing the slave
3651 * User should expect communications
3652 * breakage anyway until ARP finish
3655 netdev_dbg(bond_dev
, "err %d %s\n", res
, slave
->dev
->name
);
3661 memcpy(bond_dev
->dev_addr
, sa
->sa_data
, bond_dev
->addr_len
);
3665 memcpy(tmp_sa
.sa_data
, bond_dev
->dev_addr
, bond_dev
->addr_len
);
3666 tmp_sa
.sa_family
= bond_dev
->type
;
3668 /* unwind from head to the slave that failed */
3669 bond_for_each_slave(bond
, rollback_slave
, iter
) {
3672 if (rollback_slave
== slave
)
3675 tmp_res
= dev_set_mac_address(rollback_slave
->dev
, &tmp_sa
);
3677 netdev_dbg(bond_dev
, "unwind err %d dev %s\n",
3678 tmp_res
, rollback_slave
->dev
->name
);
3686 * bond_xmit_slave_id - transmit skb through slave with slave_id
3687 * @bond: bonding device that is transmitting
3688 * @skb: buffer to transmit
3689 * @slave_id: slave id up to slave_cnt-1 through which to transmit
3691 * This function tries to transmit through slave with slave_id but in case
3692 * it fails, it tries to find the first available slave for transmission.
3693 * The skb is consumed in all cases, thus the function is void.
3695 static void bond_xmit_slave_id(struct bonding
*bond
, struct sk_buff
*skb
, int slave_id
)
3697 struct list_head
*iter
;
3698 struct slave
*slave
;
3701 /* Here we start from the slave with slave_id */
3702 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3704 if (bond_slave_can_tx(slave
)) {
3705 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3711 /* Here we start from the first slave up to slave_id */
3713 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3716 if (bond_slave_can_tx(slave
)) {
3717 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3721 /* no slave that can tx has been found */
3722 bond_tx_drop(bond
->dev
, skb
);
3726 * bond_rr_gen_slave_id - generate slave id based on packets_per_slave
3727 * @bond: bonding device to use
3729 * Based on the value of the bonding device's packets_per_slave parameter
3730 * this function generates a slave id, which is usually used as the next
3731 * slave to transmit through.
3733 static u32
bond_rr_gen_slave_id(struct bonding
*bond
)
3736 struct reciprocal_value reciprocal_packets_per_slave
;
3737 int packets_per_slave
= bond
->params
.packets_per_slave
;
3739 switch (packets_per_slave
) {
3741 slave_id
= prandom_u32();
3744 slave_id
= bond
->rr_tx_counter
;
3747 reciprocal_packets_per_slave
=
3748 bond
->params
.reciprocal_packets_per_slave
;
3749 slave_id
= reciprocal_divide(bond
->rr_tx_counter
,
3750 reciprocal_packets_per_slave
);
3753 bond
->rr_tx_counter
++;
3758 static int bond_xmit_roundrobin(struct sk_buff
*skb
, struct net_device
*bond_dev
)
3760 struct bonding
*bond
= netdev_priv(bond_dev
);
3761 struct iphdr
*iph
= ip_hdr(skb
);
3762 struct slave
*slave
;
3765 /* Start with the curr_active_slave that joined the bond as the
3766 * default for sending IGMP traffic. For failover purposes one
3767 * needs to maintain some consistency for the interface that will
3768 * send the join/membership reports. The curr_active_slave found
3769 * will send all of this type of traffic.
3771 if (iph
->protocol
== IPPROTO_IGMP
&& skb
->protocol
== htons(ETH_P_IP
)) {
3772 slave
= rcu_dereference(bond
->curr_active_slave
);
3774 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3776 bond_xmit_slave_id(bond
, skb
, 0);
3778 int slave_cnt
= ACCESS_ONCE(bond
->slave_cnt
);
3780 if (likely(slave_cnt
)) {
3781 slave_id
= bond_rr_gen_slave_id(bond
);
3782 bond_xmit_slave_id(bond
, skb
, slave_id
% slave_cnt
);
3784 bond_tx_drop(bond_dev
, skb
);
3788 return NETDEV_TX_OK
;
3791 /* In active-backup mode, we know that bond->curr_active_slave is always valid if
3792 * the bond has a usable interface.
3794 static int bond_xmit_activebackup(struct sk_buff
*skb
, struct net_device
*bond_dev
)
3796 struct bonding
*bond
= netdev_priv(bond_dev
);
3797 struct slave
*slave
;
3799 slave
= rcu_dereference(bond
->curr_active_slave
);
3801 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3803 bond_tx_drop(bond_dev
, skb
);
3805 return NETDEV_TX_OK
;
3808 /* Use this to update slave_array when (a) it's not appropriate to update
3809 * slave_array right away (note that update_slave_array() may sleep)
3810 * and / or (b) RTNL is not held.
3812 void bond_slave_arr_work_rearm(struct bonding
*bond
, unsigned long delay
)
3814 queue_delayed_work(bond
->wq
, &bond
->slave_arr_work
, delay
);
3817 /* Slave array work handler. Holds only RTNL */
3818 static void bond_slave_arr_handler(struct work_struct
*work
)
3820 struct bonding
*bond
= container_of(work
, struct bonding
,
3821 slave_arr_work
.work
);
3824 if (!rtnl_trylock())
3827 ret
= bond_update_slave_arr(bond
, NULL
);
3830 pr_warn_ratelimited("Failed to update slave array from WT\n");
3836 bond_slave_arr_work_rearm(bond
, 1);
3839 /* Build the usable slaves array in control path for modes that use xmit-hash
3840 * to determine the slave interface -
3841 * (a) BOND_MODE_8023AD
3843 * (c) BOND_MODE_TLB && tlb_dynamic_lb == 0
3845 * The caller is expected to hold RTNL only and NO other lock!
3847 int bond_update_slave_arr(struct bonding
*bond
, struct slave
*skipslave
)
3849 struct slave
*slave
;
3850 struct list_head
*iter
;
3851 struct bond_up_slave
*new_arr
, *old_arr
;
3855 #ifdef CONFIG_LOCKDEP
3856 WARN_ON(lockdep_is_held(&bond
->mode_lock
));
3859 new_arr
= kzalloc(offsetof(struct bond_up_slave
, arr
[bond
->slave_cnt
]),
3863 pr_err("Failed to build slave-array.\n");
3866 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
3867 struct ad_info ad_info
;
3869 if (bond_3ad_get_active_agg_info(bond
, &ad_info
)) {
3870 pr_debug("bond_3ad_get_active_agg_info failed\n");
3871 kfree_rcu(new_arr
, rcu
);
3872 /* No active aggragator means it's not safe to use
3873 * the previous array.
3875 old_arr
= rtnl_dereference(bond
->slave_arr
);
3877 RCU_INIT_POINTER(bond
->slave_arr
, NULL
);
3878 kfree_rcu(old_arr
, rcu
);
3882 agg_id
= ad_info
.aggregator_id
;
3884 bond_for_each_slave(bond
, slave
, iter
) {
3885 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
3886 struct aggregator
*agg
;
3888 agg
= SLAVE_AD_INFO(slave
)->port
.aggregator
;
3889 if (!agg
|| agg
->aggregator_identifier
!= agg_id
)
3892 if (!bond_slave_can_tx(slave
))
3894 if (skipslave
== slave
)
3896 new_arr
->arr
[new_arr
->count
++] = slave
;
3899 old_arr
= rtnl_dereference(bond
->slave_arr
);
3900 rcu_assign_pointer(bond
->slave_arr
, new_arr
);
3902 kfree_rcu(old_arr
, rcu
);
3904 if (ret
!= 0 && skipslave
) {
3907 /* Rare situation where caller has asked to skip a specific
3908 * slave but allocation failed (most likely!). BTW this is
3909 * only possible when the call is initiated from
3910 * __bond_release_one(). In this situation; overwrite the
3911 * skipslave entry in the array with the last entry from the
3912 * array to avoid a situation where the xmit path may choose
3913 * this to-be-skipped slave to send a packet out.
3915 old_arr
= rtnl_dereference(bond
->slave_arr
);
3916 for (idx
= 0; idx
< old_arr
->count
; idx
++) {
3917 if (skipslave
== old_arr
->arr
[idx
]) {
3919 old_arr
->arr
[old_arr
->count
-1];
3928 /* Use this Xmit function for 3AD as well as XOR modes. The current
3929 * usable slave array is formed in the control path. The xmit function
3930 * just calculates hash and sends the packet out.
3932 static int bond_3ad_xor_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
3934 struct bonding
*bond
= netdev_priv(dev
);
3935 struct slave
*slave
;
3936 struct bond_up_slave
*slaves
;
3939 slaves
= rcu_dereference(bond
->slave_arr
);
3940 count
= slaves
? ACCESS_ONCE(slaves
->count
) : 0;
3941 if (likely(count
)) {
3942 slave
= slaves
->arr
[bond_xmit_hash(bond
, skb
) % count
];
3943 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3945 bond_tx_drop(dev
, skb
);
3948 return NETDEV_TX_OK
;
3951 /* in broadcast mode, we send everything to all usable interfaces. */
3952 static int bond_xmit_broadcast(struct sk_buff
*skb
, struct net_device
*bond_dev
)
3954 struct bonding
*bond
= netdev_priv(bond_dev
);
3955 struct slave
*slave
= NULL
;
3956 struct list_head
*iter
;
3958 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3959 if (bond_is_last_slave(bond
, slave
))
3961 if (bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
) {
3962 struct sk_buff
*skb2
= skb_clone(skb
, GFP_ATOMIC
);
3965 net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
3966 bond_dev
->name
, __func__
);
3969 bond_dev_queue_xmit(bond
, skb2
, slave
->dev
);
3972 if (slave
&& bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
)
3973 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3975 bond_tx_drop(bond_dev
, skb
);
3977 return NETDEV_TX_OK
;
3980 /*------------------------- Device initialization ---------------------------*/
3982 /* Lookup the slave that corresponds to a qid */
3983 static inline int bond_slave_override(struct bonding
*bond
,
3984 struct sk_buff
*skb
)
3986 struct slave
*slave
= NULL
;
3987 struct list_head
*iter
;
3989 if (!skb
->queue_mapping
)
3992 /* Find out if any slaves have the same mapping as this skb. */
3993 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3994 if (slave
->queue_id
== skb
->queue_mapping
) {
3995 if (bond_slave_is_up(slave
) &&
3996 slave
->link
== BOND_LINK_UP
) {
3997 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
4000 /* If the slave isn't UP, use default transmit policy. */
4009 static u16
bond_select_queue(struct net_device
*dev
, struct sk_buff
*skb
,
4010 void *accel_priv
, select_queue_fallback_t fallback
)
4012 /* This helper function exists to help dev_pick_tx get the correct
4013 * destination queue. Using a helper function skips a call to
4014 * skb_tx_hash and will put the skbs in the queue we expect on their
4015 * way down to the bonding driver.
4017 u16 txq
= skb_rx_queue_recorded(skb
) ? skb_get_rx_queue(skb
) : 0;
4019 /* Save the original txq to restore before passing to the driver */
4020 qdisc_skb_cb(skb
)->slave_dev_queue_mapping
= skb
->queue_mapping
;
4022 if (unlikely(txq
>= dev
->real_num_tx_queues
)) {
4024 txq
-= dev
->real_num_tx_queues
;
4025 } while (txq
>= dev
->real_num_tx_queues
);
4030 static netdev_tx_t
__bond_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
4032 struct bonding
*bond
= netdev_priv(dev
);
4034 if (bond_should_override_tx_queue(bond
) &&
4035 !bond_slave_override(bond
, skb
))
4036 return NETDEV_TX_OK
;
4038 switch (BOND_MODE(bond
)) {
4039 case BOND_MODE_ROUNDROBIN
:
4040 return bond_xmit_roundrobin(skb
, dev
);
4041 case BOND_MODE_ACTIVEBACKUP
:
4042 return bond_xmit_activebackup(skb
, dev
);
4043 case BOND_MODE_8023AD
:
4045 return bond_3ad_xor_xmit(skb
, dev
);
4046 case BOND_MODE_BROADCAST
:
4047 return bond_xmit_broadcast(skb
, dev
);
4049 return bond_alb_xmit(skb
, dev
);
4051 return bond_tlb_xmit(skb
, dev
);
4053 /* Should never happen, mode already checked */
4054 netdev_err(dev
, "Unknown bonding mode %d\n", BOND_MODE(bond
));
4056 bond_tx_drop(dev
, skb
);
4057 return NETDEV_TX_OK
;
4061 static netdev_tx_t
bond_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
4063 struct bonding
*bond
= netdev_priv(dev
);
4064 netdev_tx_t ret
= NETDEV_TX_OK
;
4066 /* If we risk deadlock from transmitting this in the
4067 * netpoll path, tell netpoll to queue the frame for later tx
4069 if (unlikely(is_netpoll_tx_blocked(dev
)))
4070 return NETDEV_TX_BUSY
;
4073 if (bond_has_slaves(bond
))
4074 ret
= __bond_start_xmit(skb
, dev
);
4076 bond_tx_drop(dev
, skb
);
4082 static int bond_ethtool_get_settings(struct net_device
*bond_dev
,
4083 struct ethtool_cmd
*ecmd
)
4085 struct bonding
*bond
= netdev_priv(bond_dev
);
4086 unsigned long speed
= 0;
4087 struct list_head
*iter
;
4088 struct slave
*slave
;
4090 ecmd
->duplex
= DUPLEX_UNKNOWN
;
4091 ecmd
->port
= PORT_OTHER
;
4093 /* Since bond_slave_can_tx returns false for all inactive or down slaves, we
4094 * do not need to check mode. Though link speed might not represent
4095 * the true receive or transmit bandwidth (not all modes are symmetric)
4096 * this is an accurate maximum.
4098 bond_for_each_slave(bond
, slave
, iter
) {
4099 if (bond_slave_can_tx(slave
)) {
4100 if (slave
->speed
!= SPEED_UNKNOWN
)
4101 speed
+= slave
->speed
;
4102 if (ecmd
->duplex
== DUPLEX_UNKNOWN
&&
4103 slave
->duplex
!= DUPLEX_UNKNOWN
)
4104 ecmd
->duplex
= slave
->duplex
;
4107 ethtool_cmd_speed_set(ecmd
, speed
? : SPEED_UNKNOWN
);
4112 static void bond_ethtool_get_drvinfo(struct net_device
*bond_dev
,
4113 struct ethtool_drvinfo
*drvinfo
)
4115 strlcpy(drvinfo
->driver
, DRV_NAME
, sizeof(drvinfo
->driver
));
4116 strlcpy(drvinfo
->version
, DRV_VERSION
, sizeof(drvinfo
->version
));
4117 snprintf(drvinfo
->fw_version
, sizeof(drvinfo
->fw_version
), "%d",
4121 static const struct ethtool_ops bond_ethtool_ops
= {
4122 .get_drvinfo
= bond_ethtool_get_drvinfo
,
4123 .get_settings
= bond_ethtool_get_settings
,
4124 .get_link
= ethtool_op_get_link
,
4127 static const struct net_device_ops bond_netdev_ops
= {
4128 .ndo_init
= bond_init
,
4129 .ndo_uninit
= bond_uninit
,
4130 .ndo_open
= bond_open
,
4131 .ndo_stop
= bond_close
,
4132 .ndo_start_xmit
= bond_start_xmit
,
4133 .ndo_select_queue
= bond_select_queue
,
4134 .ndo_get_stats64
= bond_get_stats
,
4135 .ndo_do_ioctl
= bond_do_ioctl
,
4136 .ndo_change_rx_flags
= bond_change_rx_flags
,
4137 .ndo_set_rx_mode
= bond_set_rx_mode
,
4138 .ndo_change_mtu
= bond_change_mtu
,
4139 .ndo_set_mac_address
= bond_set_mac_address
,
4140 .ndo_neigh_setup
= bond_neigh_setup
,
4141 .ndo_vlan_rx_add_vid
= bond_vlan_rx_add_vid
,
4142 .ndo_vlan_rx_kill_vid
= bond_vlan_rx_kill_vid
,
4143 #ifdef CONFIG_NET_POLL_CONTROLLER
4144 .ndo_netpoll_setup
= bond_netpoll_setup
,
4145 .ndo_netpoll_cleanup
= bond_netpoll_cleanup
,
4146 .ndo_poll_controller
= bond_poll_controller
,
4148 .ndo_add_slave
= bond_enslave
,
4149 .ndo_del_slave
= bond_release
,
4150 .ndo_fix_features
= bond_fix_features
,
4151 .ndo_neigh_construct
= netdev_default_l2upper_neigh_construct
,
4152 .ndo_neigh_destroy
= netdev_default_l2upper_neigh_destroy
,
4153 .ndo_bridge_setlink
= switchdev_port_bridge_setlink
,
4154 .ndo_bridge_getlink
= switchdev_port_bridge_getlink
,
4155 .ndo_bridge_dellink
= switchdev_port_bridge_dellink
,
4156 .ndo_fdb_add
= switchdev_port_fdb_add
,
4157 .ndo_fdb_del
= switchdev_port_fdb_del
,
4158 .ndo_fdb_dump
= switchdev_port_fdb_dump
,
4159 .ndo_features_check
= passthru_features_check
,
4162 static const struct device_type bond_type
= {
4166 static void bond_destructor(struct net_device
*bond_dev
)
4168 struct bonding
*bond
= netdev_priv(bond_dev
);
4170 destroy_workqueue(bond
->wq
);
4171 free_netdev(bond_dev
);
4174 void bond_setup(struct net_device
*bond_dev
)
4176 struct bonding
*bond
= netdev_priv(bond_dev
);
4178 spin_lock_init(&bond
->mode_lock
);
4179 spin_lock_init(&bond
->stats_lock
);
4180 bond
->params
= bonding_defaults
;
4182 /* Initialize pointers */
4183 bond
->dev
= bond_dev
;
4185 /* Initialize the device entry points */
4186 ether_setup(bond_dev
);
4187 bond_dev
->netdev_ops
= &bond_netdev_ops
;
4188 bond_dev
->ethtool_ops
= &bond_ethtool_ops
;
4190 bond_dev
->destructor
= bond_destructor
;
4192 SET_NETDEV_DEVTYPE(bond_dev
, &bond_type
);
4194 /* Initialize the device options */
4195 bond_dev
->flags
|= IFF_MASTER
;
4196 bond_dev
->priv_flags
|= IFF_BONDING
| IFF_UNICAST_FLT
| IFF_NO_QUEUE
;
4197 bond_dev
->priv_flags
&= ~(IFF_XMIT_DST_RELEASE
| IFF_TX_SKB_SHARING
);
4199 /* don't acquire bond device's netif_tx_lock when transmitting */
4200 bond_dev
->features
|= NETIF_F_LLTX
;
4202 /* By default, we declare the bond to be fully
4203 * VLAN hardware accelerated capable. Special
4204 * care is taken in the various xmit functions
4205 * when there are slaves that are not hw accel
4209 /* Don't allow bond devices to change network namespaces. */
4210 bond_dev
->features
|= NETIF_F_NETNS_LOCAL
;
4212 bond_dev
->hw_features
= BOND_VLAN_FEATURES
|
4213 NETIF_F_HW_VLAN_CTAG_TX
|
4214 NETIF_F_HW_VLAN_CTAG_RX
|
4215 NETIF_F_HW_VLAN_CTAG_FILTER
;
4217 bond_dev
->hw_features
|= NETIF_F_GSO_ENCAP_ALL
;
4218 bond_dev
->features
|= bond_dev
->hw_features
;
4221 /* Destroy a bonding device.
4222 * Must be under rtnl_lock when this function is called.
4224 static void bond_uninit(struct net_device
*bond_dev
)
4226 struct bonding
*bond
= netdev_priv(bond_dev
);
4227 struct list_head
*iter
;
4228 struct slave
*slave
;
4229 struct bond_up_slave
*arr
;
4231 bond_netpoll_cleanup(bond_dev
);
4233 /* Release the bonded slaves */
4234 bond_for_each_slave(bond
, slave
, iter
)
4235 __bond_release_one(bond_dev
, slave
->dev
, true);
4236 netdev_info(bond_dev
, "Released all slaves\n");
4238 arr
= rtnl_dereference(bond
->slave_arr
);
4240 RCU_INIT_POINTER(bond
->slave_arr
, NULL
);
4241 kfree_rcu(arr
, rcu
);
4244 list_del(&bond
->bond_list
);
4246 bond_debug_unregister(bond
);
4249 /*------------------------- Module initialization ---------------------------*/
4251 static int bond_check_params(struct bond_params
*params
)
4253 int arp_validate_value
, fail_over_mac_value
, primary_reselect_value
, i
;
4254 struct bond_opt_value newval
;
4255 const struct bond_opt_value
*valptr
;
4256 int arp_all_targets_value
;
4257 u16 ad_actor_sys_prio
= 0;
4258 u16 ad_user_port_key
= 0;
4260 /* Convert string parameters. */
4262 bond_opt_initstr(&newval
, mode
);
4263 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_MODE
), &newval
);
4265 pr_err("Error: Invalid bonding mode \"%s\"\n", mode
);
4268 bond_mode
= valptr
->value
;
4271 if (xmit_hash_policy
) {
4272 if ((bond_mode
!= BOND_MODE_XOR
) &&
4273 (bond_mode
!= BOND_MODE_8023AD
) &&
4274 (bond_mode
!= BOND_MODE_TLB
)) {
4275 pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
4276 bond_mode_name(bond_mode
));
4278 bond_opt_initstr(&newval
, xmit_hash_policy
);
4279 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_XMIT_HASH
),
4282 pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
4286 xmit_hashtype
= valptr
->value
;
4291 if (bond_mode
!= BOND_MODE_8023AD
) {
4292 pr_info("lacp_rate param is irrelevant in mode %s\n",
4293 bond_mode_name(bond_mode
));
4295 bond_opt_initstr(&newval
, lacp_rate
);
4296 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_LACP_RATE
),
4299 pr_err("Error: Invalid lacp rate \"%s\"\n",
4303 lacp_fast
= valptr
->value
;
4308 bond_opt_initstr(&newval
, ad_select
);
4309 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT
),
4312 pr_err("Error: Invalid ad_select \"%s\"\n", ad_select
);
4315 params
->ad_select
= valptr
->value
;
4316 if (bond_mode
!= BOND_MODE_8023AD
)
4317 pr_warn("ad_select param only affects 802.3ad mode\n");
4319 params
->ad_select
= BOND_AD_STABLE
;
4322 if (max_bonds
< 0) {
4323 pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
4324 max_bonds
, 0, INT_MAX
, BOND_DEFAULT_MAX_BONDS
);
4325 max_bonds
= BOND_DEFAULT_MAX_BONDS
;
4329 pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4335 pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4340 if (downdelay
< 0) {
4341 pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4342 downdelay
, INT_MAX
);
4346 if ((use_carrier
!= 0) && (use_carrier
!= 1)) {
4347 pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
4352 if (num_peer_notif
< 0 || num_peer_notif
> 255) {
4353 pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
4358 /* reset values for 802.3ad/TLB/ALB */
4359 if (!bond_mode_uses_arp(bond_mode
)) {
4361 pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
4362 pr_warn("Forcing miimon to 100msec\n");
4363 miimon
= BOND_DEFAULT_MIIMON
;
4367 if (tx_queues
< 1 || tx_queues
> 255) {
4368 pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n",
4369 tx_queues
, BOND_DEFAULT_TX_QUEUES
);
4370 tx_queues
= BOND_DEFAULT_TX_QUEUES
;
4373 if ((all_slaves_active
!= 0) && (all_slaves_active
!= 1)) {
4374 pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n",
4376 all_slaves_active
= 0;
4379 if (resend_igmp
< 0 || resend_igmp
> 255) {
4380 pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n",
4381 resend_igmp
, BOND_DEFAULT_RESEND_IGMP
);
4382 resend_igmp
= BOND_DEFAULT_RESEND_IGMP
;
4385 bond_opt_initval(&newval
, packets_per_slave
);
4386 if (!bond_opt_parse(bond_opt_get(BOND_OPT_PACKETS_PER_SLAVE
), &newval
)) {
4387 pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n",
4388 packets_per_slave
, USHRT_MAX
);
4389 packets_per_slave
= 1;
4392 if (bond_mode
== BOND_MODE_ALB
) {
4393 pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
4398 if (updelay
|| downdelay
) {
4399 /* just warn the user the up/down delay will have
4400 * no effect since miimon is zero...
4402 pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
4403 updelay
, downdelay
);
4406 /* don't allow arp monitoring */
4408 pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
4409 miimon
, arp_interval
);
4413 if ((updelay
% miimon
) != 0) {
4414 pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
4415 updelay
, miimon
, (updelay
/ miimon
) * miimon
);
4420 if ((downdelay
% miimon
) != 0) {
4421 pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
4423 (downdelay
/ miimon
) * miimon
);
4426 downdelay
/= miimon
;
4429 if (arp_interval
< 0) {
4430 pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4431 arp_interval
, INT_MAX
);
4435 for (arp_ip_count
= 0, i
= 0;
4436 (arp_ip_count
< BOND_MAX_ARP_TARGETS
) && arp_ip_target
[i
]; i
++) {
4439 /* not a complete check, but good enough to catch mistakes */
4440 if (!in4_pton(arp_ip_target
[i
], -1, (u8
*)&ip
, -1, NULL
) ||
4441 !bond_is_ip_target_ok(ip
)) {
4442 pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
4446 if (bond_get_targets_ip(arp_target
, ip
) == -1)
4447 arp_target
[arp_ip_count
++] = ip
;
4449 pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
4454 if (arp_interval
&& !arp_ip_count
) {
4455 /* don't allow arping if no arp_ip_target given... */
4456 pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
4462 if (!arp_interval
) {
4463 pr_err("arp_validate requires arp_interval\n");
4467 bond_opt_initstr(&newval
, arp_validate
);
4468 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_ARP_VALIDATE
),
4471 pr_err("Error: invalid arp_validate \"%s\"\n",
4475 arp_validate_value
= valptr
->value
;
4477 arp_validate_value
= 0;
4480 arp_all_targets_value
= 0;
4481 if (arp_all_targets
) {
4482 bond_opt_initstr(&newval
, arp_all_targets
);
4483 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS
),
4486 pr_err("Error: invalid arp_all_targets_value \"%s\"\n",
4488 arp_all_targets_value
= 0;
4490 arp_all_targets_value
= valptr
->value
;
4495 pr_info("MII link monitoring set to %d ms\n", miimon
);
4496 } else if (arp_interval
) {
4497 valptr
= bond_opt_get_val(BOND_OPT_ARP_VALIDATE
,
4498 arp_validate_value
);
4499 pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
4500 arp_interval
, valptr
->string
, arp_ip_count
);
4502 for (i
= 0; i
< arp_ip_count
; i
++)
4503 pr_cont(" %s", arp_ip_target
[i
]);
4507 } else if (max_bonds
) {
4508 /* miimon and arp_interval not set, we need one so things
4509 * work as expected, see bonding.txt for details
4511 pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n");
4514 if (primary
&& !bond_mode_uses_primary(bond_mode
)) {
4515 /* currently, using a primary only makes sense
4516 * in active backup, TLB or ALB modes
4518 pr_warn("Warning: %s primary device specified but has no effect in %s mode\n",
4519 primary
, bond_mode_name(bond_mode
));
4523 if (primary
&& primary_reselect
) {
4524 bond_opt_initstr(&newval
, primary_reselect
);
4525 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_PRIMARY_RESELECT
),
4528 pr_err("Error: Invalid primary_reselect \"%s\"\n",
4532 primary_reselect_value
= valptr
->value
;
4534 primary_reselect_value
= BOND_PRI_RESELECT_ALWAYS
;
4537 if (fail_over_mac
) {
4538 bond_opt_initstr(&newval
, fail_over_mac
);
4539 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_FAIL_OVER_MAC
),
4542 pr_err("Error: invalid fail_over_mac \"%s\"\n",
4546 fail_over_mac_value
= valptr
->value
;
4547 if (bond_mode
!= BOND_MODE_ACTIVEBACKUP
)
4548 pr_warn("Warning: fail_over_mac only affects active-backup mode\n");
4550 fail_over_mac_value
= BOND_FOM_NONE
;
4553 bond_opt_initstr(&newval
, "default");
4554 valptr
= bond_opt_parse(
4555 bond_opt_get(BOND_OPT_AD_ACTOR_SYS_PRIO
),
4558 pr_err("Error: No ad_actor_sys_prio default value");
4561 ad_actor_sys_prio
= valptr
->value
;
4563 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY
),
4566 pr_err("Error: No ad_user_port_key default value");
4569 ad_user_port_key
= valptr
->value
;
4571 if (lp_interval
== 0) {
4572 pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
4573 INT_MAX
, BOND_ALB_DEFAULT_LP_INTERVAL
);
4574 lp_interval
= BOND_ALB_DEFAULT_LP_INTERVAL
;
4577 /* fill params struct with the proper values */
4578 params
->mode
= bond_mode
;
4579 params
->xmit_policy
= xmit_hashtype
;
4580 params
->miimon
= miimon
;
4581 params
->num_peer_notif
= num_peer_notif
;
4582 params
->arp_interval
= arp_interval
;
4583 params
->arp_validate
= arp_validate_value
;
4584 params
->arp_all_targets
= arp_all_targets_value
;
4585 params
->updelay
= updelay
;
4586 params
->downdelay
= downdelay
;
4587 params
->use_carrier
= use_carrier
;
4588 params
->lacp_fast
= lacp_fast
;
4589 params
->primary
[0] = 0;
4590 params
->primary_reselect
= primary_reselect_value
;
4591 params
->fail_over_mac
= fail_over_mac_value
;
4592 params
->tx_queues
= tx_queues
;
4593 params
->all_slaves_active
= all_slaves_active
;
4594 params
->resend_igmp
= resend_igmp
;
4595 params
->min_links
= min_links
;
4596 params
->lp_interval
= lp_interval
;
4597 params
->packets_per_slave
= packets_per_slave
;
4598 params
->tlb_dynamic_lb
= 1; /* Default value */
4599 params
->ad_actor_sys_prio
= ad_actor_sys_prio
;
4600 eth_zero_addr(params
->ad_actor_system
);
4601 params
->ad_user_port_key
= ad_user_port_key
;
4602 if (packets_per_slave
> 0) {
4603 params
->reciprocal_packets_per_slave
=
4604 reciprocal_value(packets_per_slave
);
4606 /* reciprocal_packets_per_slave is unused if
4607 * packets_per_slave is 0 or 1, just initialize it
4609 params
->reciprocal_packets_per_slave
=
4610 (struct reciprocal_value
) { 0 };
4614 strncpy(params
->primary
, primary
, IFNAMSIZ
);
4615 params
->primary
[IFNAMSIZ
- 1] = 0;
4618 memcpy(params
->arp_targets
, arp_target
, sizeof(arp_target
));
4623 /* Called from registration process */
4624 static int bond_init(struct net_device
*bond_dev
)
4626 struct bonding
*bond
= netdev_priv(bond_dev
);
4627 struct bond_net
*bn
= net_generic(dev_net(bond_dev
), bond_net_id
);
4629 netdev_dbg(bond_dev
, "Begin bond_init\n");
4631 bond
->wq
= alloc_ordered_workqueue(bond_dev
->name
, WQ_MEM_RECLAIM
);
4635 netdev_lockdep_set_classes(bond_dev
);
4637 list_add_tail(&bond
->bond_list
, &bn
->dev_list
);
4639 bond_prepare_sysfs_group(bond
);
4641 bond_debug_register(bond
);
4643 /* Ensure valid dev_addr */
4644 if (is_zero_ether_addr(bond_dev
->dev_addr
) &&
4645 bond_dev
->addr_assign_type
== NET_ADDR_PERM
)
4646 eth_hw_addr_random(bond_dev
);
4651 unsigned int bond_get_num_tx_queues(void)
4656 /* Create a new bond based on the specified name and bonding parameters.
4657 * If name is NULL, obtain a suitable "bond%d" name for us.
4658 * Caller must NOT hold rtnl_lock; we need to release it here before we
4659 * set up our sysfs entries.
4661 int bond_create(struct net
*net
, const char *name
)
4663 struct net_device
*bond_dev
;
4664 struct bonding
*bond
;
4665 struct alb_bond_info
*bond_info
;
4670 bond_dev
= alloc_netdev_mq(sizeof(struct bonding
),
4671 name
? name
: "bond%d", NET_NAME_UNKNOWN
,
4672 bond_setup
, tx_queues
);
4674 pr_err("%s: eek! can't alloc netdev!\n", name
);
4680 * Initialize rx_hashtbl_used_head to RLB_NULL_INDEX.
4681 * It is set to 0 by default which is wrong.
4683 bond
= netdev_priv(bond_dev
);
4684 bond_info
= &(BOND_ALB_INFO(bond
));
4685 bond_info
->rx_hashtbl_used_head
= RLB_NULL_INDEX
;
4687 dev_net_set(bond_dev
, net
);
4688 bond_dev
->rtnl_link_ops
= &bond_link_ops
;
4690 res
= register_netdevice(bond_dev
);
4692 netif_carrier_off(bond_dev
);
4696 bond_destructor(bond_dev
);
4700 static int __net_init
bond_net_init(struct net
*net
)
4702 struct bond_net
*bn
= net_generic(net
, bond_net_id
);
4705 INIT_LIST_HEAD(&bn
->dev_list
);
4707 bond_create_proc_dir(bn
);
4708 bond_create_sysfs(bn
);
4713 static void __net_exit
bond_net_exit(struct net
*net
)
4715 struct bond_net
*bn
= net_generic(net
, bond_net_id
);
4716 struct bonding
*bond
, *tmp_bond
;
4719 bond_destroy_sysfs(bn
);
4721 /* Kill off any bonds created after unregistering bond rtnl ops */
4723 list_for_each_entry_safe(bond
, tmp_bond
, &bn
->dev_list
, bond_list
)
4724 unregister_netdevice_queue(bond
->dev
, &list
);
4725 unregister_netdevice_many(&list
);
4728 bond_destroy_proc_dir(bn
);
4731 static struct pernet_operations bond_net_ops
= {
4732 .init
= bond_net_init
,
4733 .exit
= bond_net_exit
,
4735 .size
= sizeof(struct bond_net
),
4738 static int __init
bonding_init(void)
4743 pr_info("%s", bond_version
);
4745 res
= bond_check_params(&bonding_defaults
);
4749 res
= register_pernet_subsys(&bond_net_ops
);
4753 res
= bond_netlink_init();
4757 bond_create_debugfs();
4759 for (i
= 0; i
< max_bonds
; i
++) {
4760 res
= bond_create(&init_net
, NULL
);
4765 register_netdevice_notifier(&bond_netdev_notifier
);
4769 bond_destroy_debugfs();
4770 bond_netlink_fini();
4772 unregister_pernet_subsys(&bond_net_ops
);
4777 static void __exit
bonding_exit(void)
4779 unregister_netdevice_notifier(&bond_netdev_notifier
);
4781 bond_destroy_debugfs();
4783 bond_netlink_fini();
4784 unregister_pernet_subsys(&bond_net_ops
);
4786 #ifdef CONFIG_NET_POLL_CONTROLLER
4787 /* Make sure we don't have an imbalance on our netpoll blocking */
4788 WARN_ON(atomic_read(&netpoll_block_tx
));
4792 module_init(bonding_init
);
4793 module_exit(bonding_exit
);
4794 MODULE_LICENSE("GPL");
4795 MODULE_VERSION(DRV_VERSION
);
4796 MODULE_DESCRIPTION(DRV_DESCRIPTION
", v" DRV_VERSION
);
4797 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");