?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
pvrusb2: reduce stack usage pvr2_eeprom_analyze()
[linux/fpc-iii.git] / drivers / net / ethernet / 8390 / zorro8390.c
blob8308728fad0511c74f0164488a59e09ef2ea8194
1 /*
2 * Amiga Linux/m68k and Linux/PPC Zorro NS8390 Ethernet Driver
3 *
4 * (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM)
5 *
6 * ---------------------------------------------------------------------------
7 *
8 * This program is based on all the other NE2000 drivers for Linux
9 *
10 * ---------------------------------------------------------------------------
11 *
12 * This file is subject to the terms and conditions of the GNU General Public
13 * License. See the file COPYING in the main directory of the Linux
14 * distribution for more details.
15 *
16 * ---------------------------------------------------------------------------
17 *
18 * The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS
19 * Ethernet Controllers.
20 */
21
22 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
23
24 #include <linux/module.h>
25 #include <linux/kernel.h>
26 #include <linux/errno.h>
27 #include <linux/init.h>
28 #include <linux/delay.h>
29 #include <linux/netdevice.h>
30 #include <linux/etherdevice.h>
31 #include <linux/zorro.h>
32 #include <linux/jiffies.h>
33
34 #include <asm/irq.h>
35 #include <asm/amigaints.h>
36 #include <asm/amigahw.h>
37
38 #define EI_SHIFT(x) (ei_local->reg_offset[x])
39 #define ei_inb(port) in_8(port)
40 #define ei_outb(val, port) out_8(port, val)
41 #define ei_inb_p(port) in_8(port)
42 #define ei_outb_p(val, port) out_8(port, val)
43
44 static const char version[] =
45 "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
46
47 static u32 zorro8390_msg_enable;
48
49 #include "lib8390.c"
50
51 #define DRV_NAME "zorro8390"
52
53 #define NE_BASE (dev->base_addr)
54 #define NE_CMD (0x00 * 2)
55 #define NE_DATAPORT (0x10 * 2) /* NatSemi-defined port window offset */
56 #define NE_RESET (0x1f * 2) /* Issue a read to reset,
57 * a write to clear. */
58 #define NE_IO_EXTENT (0x20 * 2)
59
60 #define NE_EN0_ISR (0x07 * 2)
61 #define NE_EN0_DCFG (0x0e * 2)
62
63 #define NE_EN0_RSARLO (0x08 * 2)
64 #define NE_EN0_RSARHI (0x09 * 2)
65 #define NE_EN0_RCNTLO (0x0a * 2)
66 #define NE_EN0_RXCR (0x0c * 2)
67 #define NE_EN0_TXCR (0x0d * 2)
68 #define NE_EN0_RCNTHI (0x0b * 2)
69 #define NE_EN0_IMR (0x0f * 2)
70
71 #define NESM_START_PG 0x40 /* First page of TX buffer */
72 #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
73
74 #define WORDSWAP(a) ((((a) >> 8) & 0xff) | ((a) << 8))
75
76 static struct card_info {
77 zorro_id id;
78 const char *name;
79 unsigned int offset;
80 } cards[] = {
81 { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 },
82 { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 },
83 };
84
85 /* Hard reset the card. This used to pause for the same period that a
86 * 8390 reset command required, but that shouldn't be necessary.
87 */
88 static void zorro8390_reset_8390(struct net_device *dev)
89 {
90 unsigned long reset_start_time = jiffies;
91 struct ei_device *ei_local = netdev_priv(dev);
92
93 netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies);
94
95 z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
96
97 ei_status.txing = 0;
98 ei_status.dmaing = 0;
99
100 /* This check _should_not_ be necessary, omit eventually. */
101 while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RESET) == 0)
102 if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) {
103 netdev_warn(dev, "%s: did not complete\n", __func__);
104 break;
105 }
106 z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr */
107 }
108
109 /* Grab the 8390 specific header. Similar to the block_input routine, but
110 * we don't need to be concerned with ring wrap as the header will be at
111 * the start of a page, so we optimize accordingly.
112 */
113 static void zorro8390_get_8390_hdr(struct net_device *dev,
114 struct e8390_pkt_hdr *hdr, int ring_page)
115 {
116 int nic_base = dev->base_addr;
117 int cnt;
118 short *ptrs;
119
120 /* This *shouldn't* happen.
121 * If it does, it's the last thing you'll see
122 */
123 if (ei_status.dmaing) {
124 netdev_warn(dev,
125 "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
126 __func__, ei_status.dmaing, ei_status.irqlock);
127 return;
128 }
129
130 ei_status.dmaing |= 0x01;
131 z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
132 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
133 z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
134 z_writeb(0, nic_base + NE_EN0_RCNTHI);
135 z_writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */
136 z_writeb(ring_page, nic_base + NE_EN0_RSARHI);
137 z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
138
139 ptrs = (short *)hdr;
140 for (cnt = 0; cnt < sizeof(struct e8390_pkt_hdr) >> 1; cnt++)
141 *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
142
143 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */
144
145 hdr->count = WORDSWAP(hdr->count);
146
147 ei_status.dmaing &= ~0x01;
148 }
149
150 /* Block input and output, similar to the Crynwr packet driver.
151 * If you are porting to a new ethercard, look at the packet driver source
152 * for hints. The NEx000 doesn't share the on-board packet memory --
153 * you have to put the packet out through the "remote DMA" dataport
154 * using z_writeb.
155 */
156 static void zorro8390_block_input(struct net_device *dev, int count,
157 struct sk_buff *skb, int ring_offset)
158 {
159 int nic_base = dev->base_addr;
160 char *buf = skb->data;
161 short *ptrs;
162 int cnt;
163
164 /* This *shouldn't* happen.
165 * If it does, it's the last thing you'll see
166 */
167 if (ei_status.dmaing) {
168 netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
169 __func__, ei_status.dmaing, ei_status.irqlock);
170 return;
171 }
172 ei_status.dmaing |= 0x01;
173 z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
174 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
175 z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
176 z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
177 z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
178 z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
179 z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
180 ptrs = (short *)buf;
181 for (cnt = 0; cnt < count >> 1; cnt++)
182 *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
183 if (count & 0x01)
184 buf[count - 1] = z_readb(NE_BASE + NE_DATAPORT);
185
186 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */
187 ei_status.dmaing &= ~0x01;
188 }
189
190 static void zorro8390_block_output(struct net_device *dev, int count,
191 const unsigned char *buf,
192 const int start_page)
193 {
194 int nic_base = NE_BASE;
195 unsigned long dma_start;
196 short *ptrs;
197 int cnt;
198
199 /* Round the count up for word writes. Do we need to do this?
200 * What effect will an odd byte count have on the 8390?
201 * I should check someday.
202 */
203 if (count & 0x01)
204 count++;
205
206 /* This *shouldn't* happen.
207 * If it does, it's the last thing you'll see
208 */
209 if (ei_status.dmaing) {
210 netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
211 __func__, ei_status.dmaing, ei_status.irqlock);
212 return;
213 }
214 ei_status.dmaing |= 0x01;
215 /* We should already be in page 0, but to be safe... */
216 z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
217
218 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
219
220 /* Now the normal output. */
221 z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
222 z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
223 z_writeb(0x00, nic_base + NE_EN0_RSARLO);
224 z_writeb(start_page, nic_base + NE_EN0_RSARHI);
225
226 z_writeb(E8390_RWRITE + E8390_START, nic_base + NE_CMD);
227 ptrs = (short *)buf;
228 for (cnt = 0; cnt < count >> 1; cnt++)
229 z_writew(*ptrs++, NE_BASE + NE_DATAPORT);
230
231 dma_start = jiffies;
232
233 while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
234 if (time_after(jiffies, dma_start + 2 * HZ / 100)) {
235 /* 20ms */
236 netdev_warn(dev, "timeout waiting for Tx RDC\n");
237 zorro8390_reset_8390(dev);
238 __NS8390_init(dev, 1);
239 break;
240 }
241
242 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */
243 ei_status.dmaing &= ~0x01;
244 }
245
246 static int zorro8390_open(struct net_device *dev)
247 {
248 __ei_open(dev);
249 return 0;
250 }
251
252 static int zorro8390_close(struct net_device *dev)
253 {
254 struct ei_device *ei_local = netdev_priv(dev);
255
256 netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n");
257 __ei_close(dev);
258 return 0;
259 }
260
261 static void zorro8390_remove_one(struct zorro_dev *z)
262 {
263 struct net_device *dev = zorro_get_drvdata(z);
264
265 unregister_netdev(dev);
266 free_irq(IRQ_AMIGA_PORTS, dev);
267 release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT * 2);
268 free_netdev(dev);
269 }
270
271 static struct zorro_device_id zorro8390_zorro_tbl[] = {
272 { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, },
273 { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },
274 { 0 }
275 };
276 MODULE_DEVICE_TABLE(zorro, zorro8390_zorro_tbl);
277
278 static const struct net_device_ops zorro8390_netdev_ops = {
279 .ndo_open = zorro8390_open,
280 .ndo_stop = zorro8390_close,
281 .ndo_start_xmit = __ei_start_xmit,
282 .ndo_tx_timeout = __ei_tx_timeout,
283 .ndo_get_stats = __ei_get_stats,
284 .ndo_set_rx_mode = __ei_set_multicast_list,
285 .ndo_validate_addr = eth_validate_addr,
286 .ndo_set_mac_address = eth_mac_addr,
287 .ndo_change_mtu = eth_change_mtu,
288 #ifdef CONFIG_NET_POLL_CONTROLLER
289 .ndo_poll_controller = __ei_poll,
290 #endif
291 };
292
293 static int zorro8390_init(struct net_device *dev, unsigned long board,
294 const char *name, void __iomem *ioaddr)
295 {
296 int i;
297 int err;
298 unsigned char SA_prom[32];
299 int start_page, stop_page;
300 struct ei_device *ei_local = netdev_priv(dev);
301 static u32 zorro8390_offsets[16] = {
302 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e,
303 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
304 };
305
306 /* Reset card. Who knows what dain-bramaged state it was left in. */
307 {
308 unsigned long reset_start_time = jiffies;
309
310 z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
311
312 while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
313 if (time_after(jiffies,
314 reset_start_time + 2 * HZ / 100)) {
315 netdev_warn(dev, "not found (no reset ack)\n");
316 return -ENODEV;
317 }
318
319 z_writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */
320 }
321
322 /* Read the 16 bytes of station address PROM.
323 * We must first initialize registers,
324 * similar to NS8390_init(eifdev, 0).
325 * We can't reliably read the SAPROM address without this.
326 * (I learned the hard way!).
327 */
328 {
329 static const struct {
330 u32 value;
331 u32 offset;
332 } program_seq[] = {
333 {E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD},
334 /* Select page 0 */
335 {0x48, NE_EN0_DCFG}, /* 0x48: Set byte-wide access */
336 {0x00, NE_EN0_RCNTLO}, /* Clear the count regs */
337 {0x00, NE_EN0_RCNTHI},
338 {0x00, NE_EN0_IMR}, /* Mask completion irq */
339 {0xFF, NE_EN0_ISR},
340 {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
341 {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */
342 {32, NE_EN0_RCNTLO},
343 {0x00, NE_EN0_RCNTHI},
344 {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000 */
345 {0x00, NE_EN0_RSARHI},
346 {E8390_RREAD + E8390_START, NE_CMD},
347 };
348 for (i = 0; i < ARRAY_SIZE(program_seq); i++)
349 z_writeb(program_seq[i].value,
350 ioaddr + program_seq[i].offset);
351 }
352 for (i = 0; i < 16; i++) {
353 SA_prom[i] = z_readb(ioaddr + NE_DATAPORT);
354 (void)z_readb(ioaddr + NE_DATAPORT);
355 }
356
357 /* We must set the 8390 for word mode. */
358 z_writeb(0x49, ioaddr + NE_EN0_DCFG);
359 start_page = NESM_START_PG;
360 stop_page = NESM_STOP_PG;
361
362 dev->base_addr = (unsigned long)ioaddr;
363 dev->irq = IRQ_AMIGA_PORTS;
364
365 /* Install the Interrupt handler */
366 i = request_irq(IRQ_AMIGA_PORTS, __ei_interrupt,
367 IRQF_SHARED, DRV_NAME, dev);
368 if (i)
369 return i;
370
371 for (i = 0; i < ETH_ALEN; i++)
372 dev->dev_addr[i] = SA_prom[i];
373
374 pr_debug("Found ethernet address: %pM\n", dev->dev_addr);
375
376 ei_status.name = name;
377 ei_status.tx_start_page = start_page;
378 ei_status.stop_page = stop_page;
379 ei_status.word16 = 1;
380
381 ei_status.rx_start_page = start_page + TX_PAGES;
382
383 ei_status.reset_8390 = zorro8390_reset_8390;
384 ei_status.block_input = zorro8390_block_input;
385 ei_status.block_output = zorro8390_block_output;
386 ei_status.get_8390_hdr = zorro8390_get_8390_hdr;
387 ei_status.reg_offset = zorro8390_offsets;
388
389 dev->netdev_ops = &zorro8390_netdev_ops;
390 __NS8390_init(dev, 0);
391
392 ei_local->msg_enable = zorro8390_msg_enable;
393
394 err = register_netdev(dev);
395 if (err) {
396 free_irq(IRQ_AMIGA_PORTS, dev);
397 return err;
398 }
399
400 netdev_info(dev, "%s at 0x%08lx, Ethernet Address %pM\n",
401 name, board, dev->dev_addr);
402
403 return 0;
404 }
405
406 static int zorro8390_init_one(struct zorro_dev *z,
407 const struct zorro_device_id *ent)
408 {
409 struct net_device *dev;
410 unsigned long board, ioaddr;
411 int err, i;
412
413 for (i = ARRAY_SIZE(cards) - 1; i >= 0; i--)
414 if (z->id == cards[i].id)
415 break;
416 if (i < 0)
417 return -ENODEV;
418
419 board = z->resource.start;
420 ioaddr = board + cards[i].offset;
421 dev = ____alloc_ei_netdev(0);
422 if (!dev)
423 return -ENOMEM;
424 if (!request_mem_region(ioaddr, NE_IO_EXTENT * 2, DRV_NAME)) {
425 free_netdev(dev);
426 return -EBUSY;
427 }
428 err = zorro8390_init(dev, board, cards[i].name, ZTWO_VADDR(ioaddr));
429 if (err) {
430 release_mem_region(ioaddr, NE_IO_EXTENT * 2);
431 free_netdev(dev);
432 return err;
433 }
434 zorro_set_drvdata(z, dev);
435 return 0;
436 }
437
438 static struct zorro_driver zorro8390_driver = {
439 .name = "zorro8390",
440 .id_table = zorro8390_zorro_tbl,
441 .probe = zorro8390_init_one,
442 .remove = zorro8390_remove_one,
443 };
444
445 static int __init zorro8390_init_module(void)
446 {
447 return zorro_register_driver(&zorro8390_driver);
448 }
449
450 static void __exit zorro8390_cleanup_module(void)
451 {
452 zorro_unregister_driver(&zorro8390_driver);
453 }
454
455 module_init(zorro8390_init_module);
456 module_exit(zorro8390_cleanup_module);
457
458 MODULE_LICENSE("GPL");
Linux with added FPC-III support