2 * Sun3 i82586 Ethernet driver
4 * Cloned from ni52.c for the Sun3 by Sam Creasey (sammy@sammy.net)
6 * Original copyright follows:
7 * --------------------------
9 * net-3-driver for the NI5210 card (i82586 Ethernet chip)
11 * This is an extension to the Linux operating system, and is covered by the
12 * same Gnu Public License that covers that work.
14 * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later)
15 * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de)
16 * --------------------------
18 * Consult ni52.c for further notes from the original driver.
20 * This incarnation currently supports the OBIO version of the i82586 chip
21 * used in certain sun3 models. It should be fairly doable to expand this
22 * to support VME if I should every acquire such a board.
26 static int debuglevel
= 0; /* debug-printk 0: off 1: a few 2: more */
27 static int automatic_resume
= 0; /* experimental .. better should be zero */
28 static int rfdadd
= 0; /* rfdadd=1 may be better for 8K MEM cards */
29 static int fifo
=0x8; /* don't change */
31 #include <linux/kernel.h>
32 #include <linux/string.h>
33 #include <linux/errno.h>
34 #include <linux/ioport.h>
35 #include <linux/interrupt.h>
36 #include <linux/delay.h>
37 #include <linux/init.h>
38 #include <linux/bitops.h>
40 #include <asm/idprom.h>
41 #include <asm/machines.h>
42 #include <asm/sun3mmu.h>
44 #include <asm/byteorder.h>
46 #include <linux/netdevice.h>
47 #include <linux/etherdevice.h>
48 #include <linux/skbuff.h>
50 #include "sun3_82586.h"
52 #define DRV_NAME "sun3_82586"
54 #define DEBUG /* debug on */
55 #define SYSBUSVAL 0 /* 16 Bit */
56 #define SUN3_82586_TOTAL_SIZE PAGE_SIZE
58 #define sun3_attn586() {*(volatile unsigned char *)(dev->base_addr) |= IEOB_ATTEN; *(volatile unsigned char *)(dev->base_addr) &= ~IEOB_ATTEN;}
59 #define sun3_reset586() {*(volatile unsigned char *)(dev->base_addr) = 0; udelay(100); *(volatile unsigned char *)(dev->base_addr) = IEOB_NORSET;}
60 #define sun3_disint() {*(volatile unsigned char *)(dev->base_addr) &= ~IEOB_IENAB;}
61 #define sun3_enaint() {*(volatile unsigned char *)(dev->base_addr) |= IEOB_IENAB;}
62 #define sun3_active() {*(volatile unsigned char *)(dev->base_addr) |= (IEOB_IENAB|IEOB_ONAIR|IEOB_NORSET);}
64 #define make32(ptr16) (p->memtop + (swab16((unsigned short) (ptr16))) )
65 #define make24(ptr32) (char *)swab32(( ((unsigned long) (ptr32)) - p->base))
66 #define make16(ptr32) (swab16((unsigned short) ((unsigned long)(ptr32) - (unsigned long) p->memtop )))
68 /******************* how to calculate the buffers *****************************
70 * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works
71 * --------------- in a different (more stable?) mode. Only in this mode it's
72 * possible to configure the driver with 'NO_NOPCOMMANDS'
74 sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8;
75 sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT
76 sizeof(rfd) = 24; sizeof(rbd) = 12;
77 sizeof(tbd) = 8; sizeof(transmit_cmd) = 16;
80 * if you don't know the driver, better do not change these values: */
82 #define RECV_BUFF_SIZE 1536 /* slightly oversized */
83 #define XMIT_BUFF_SIZE 1536 /* slightly oversized */
84 #define NUM_XMIT_BUFFS 1 /* config for 32K shmem */
85 #define NUM_RECV_BUFFS_8 4 /* config for 32K shared mem */
86 #define NUM_RECV_BUFFS_16 9 /* config for 32K shared mem */
87 #define NUM_RECV_BUFFS_32 16 /* config for 32K shared mem */
88 #define NO_NOPCOMMANDS /* only possible with NUM_XMIT_BUFFS=1 */
90 /**************************************************************************/
92 /* different DELAYs */
93 #define DELAY(x) mdelay(32 * x);
94 #define DELAY_16(); { udelay(16); }
95 #define DELAY_18(); { udelay(4); }
97 /* wait for command with timeout: */
98 #define WAIT_4_SCB_CMD() \
100 for(i=0;i<16384;i++) { \
101 if(!p->scb->cmd_cuc) break; \
104 printk("%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_cuc,p->scb->cus); \
105 if(!p->reseted) { p->reseted = 1; sun3_reset586(); } } } }
107 #define WAIT_4_SCB_CMD_RUC() { int i; \
108 for(i=0;i<16384;i++) { \
109 if(!p->scb->cmd_ruc) break; \
112 printk("%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_ruc,p->scb->rus); \
113 if(!p->reseted) { p->reseted = 1; sun3_reset586(); } } } }
115 #define WAIT_4_STAT_COMPL(addr) { int i; \
116 for(i=0;i<32767;i++) { \
117 if(swab16((addr)->cmd_status) & STAT_COMPL) break; \
118 DELAY_16(); DELAY_16(); } }
120 static int sun3_82586_probe1(struct net_device
*dev
,int ioaddr
);
121 static irqreturn_t
sun3_82586_interrupt(int irq
,void *dev_id
);
122 static int sun3_82586_open(struct net_device
*dev
);
123 static int sun3_82586_close(struct net_device
*dev
);
124 static int sun3_82586_send_packet(struct sk_buff
*,struct net_device
*);
125 static struct net_device_stats
*sun3_82586_get_stats(struct net_device
*dev
);
126 static void set_multicast_list(struct net_device
*dev
);
127 static void sun3_82586_timeout(struct net_device
*dev
);
129 static void sun3_82586_dump(struct net_device
*,void *);
132 /* helper-functions */
133 static int init586(struct net_device
*dev
);
134 static int check586(struct net_device
*dev
,char *where
,unsigned size
);
135 static void alloc586(struct net_device
*dev
);
136 static void startrecv586(struct net_device
*dev
);
137 static void *alloc_rfa(struct net_device
*dev
,void *ptr
);
138 static void sun3_82586_rcv_int(struct net_device
*dev
);
139 static void sun3_82586_xmt_int(struct net_device
*dev
);
140 static void sun3_82586_rnr_int(struct net_device
*dev
);
148 volatile struct rfd_struct
*rfd_last
,*rfd_top
,*rfd_first
;
149 volatile struct scp_struct
*scp
; /* volatile is important */
150 volatile struct iscp_struct
*iscp
; /* volatile is important */
151 volatile struct scb_struct
*scb
; /* volatile is important */
152 volatile struct tbd_struct
*xmit_buffs
[NUM_XMIT_BUFFS
];
153 volatile struct transmit_cmd_struct
*xmit_cmds
[NUM_XMIT_BUFFS
];
154 #if (NUM_XMIT_BUFFS == 1)
155 volatile struct nop_cmd_struct
*nop_cmds
[2];
157 volatile struct nop_cmd_struct
*nop_cmds
[NUM_XMIT_BUFFS
];
159 volatile int nop_point
,num_recv_buffs
;
160 volatile char *xmit_cbuffs
[NUM_XMIT_BUFFS
];
161 volatile int xmit_count
,xmit_last
;
164 /**********************************************
167 static int sun3_82586_close(struct net_device
*dev
)
169 free_irq(dev
->irq
, dev
);
171 sun3_reset586(); /* the hard way to stop the receiver */
173 netif_stop_queue(dev
);
178 /**********************************************
181 static int sun3_82586_open(struct net_device
*dev
)
191 ret
= request_irq(dev
->irq
, sun3_82586_interrupt
,0,dev
->name
,dev
);
198 netif_start_queue(dev
);
200 return 0; /* most done by init */
203 /**********************************************
204 * Check to see if there's an 82586 out there.
206 static int check586(struct net_device
*dev
,char *where
,unsigned size
)
209 struct priv
*p
= &pb
;
213 p
->base
= (unsigned long) dvma_btov(0);
214 p
->memtop
= (char *)dvma_btov((unsigned long)where
);
215 p
->scp
= (struct scp_struct
*)(p
->base
+ SCP_DEFAULT_ADDRESS
);
216 memset((char *)p
->scp
,0, sizeof(struct scp_struct
));
217 for(i
=0;i
<sizeof(struct scp_struct
);i
++) /* memory was writeable? */
218 if(((char *)p
->scp
)[i
])
220 p
->scp
->sysbus
= SYSBUSVAL
; /* 1 = 8Bit-Bus, 0 = 16 Bit */
221 if(p
->scp
->sysbus
!= SYSBUSVAL
)
224 iscp_addr
= (char *)dvma_btov((unsigned long)where
);
226 p
->iscp
= (struct iscp_struct
*) iscp_addr
;
227 memset((char *)p
->iscp
,0, sizeof(struct iscp_struct
));
229 p
->scp
->iscp
= make24(p
->iscp
);
234 DELAY(1); /* wait a while... */
236 if(p
->iscp
->busy
) /* i82586 clears 'busy' after successful init */
242 /******************************************************************
243 * set iscp at the right place, called by sun3_82586_probe1 and open586.
245 static void alloc586(struct net_device
*dev
)
247 struct priv
*p
= netdev_priv(dev
);
252 p
->scp
= (struct scp_struct
*) (p
->base
+ SCP_DEFAULT_ADDRESS
);
253 p
->iscp
= (struct iscp_struct
*) dvma_btov(dev
->mem_start
);
254 p
->scb
= (struct scb_struct
*) ((char *)p
->iscp
+ sizeof(struct iscp_struct
));
256 memset((char *) p
->iscp
,0,sizeof(struct iscp_struct
));
257 memset((char *) p
->scp
,0,sizeof(struct scp_struct
));
259 p
->scp
->iscp
= make24(p
->iscp
);
260 p
->scp
->sysbus
= SYSBUSVAL
;
261 p
->iscp
->scb_offset
= make16(p
->scb
);
262 p
->iscp
->scb_base
= make24(dvma_btov(dev
->mem_start
));
271 printk("%s: Init-Problems (alloc).\n",dev
->name
);
275 memset((char *)p
->scb
,0,sizeof(struct scb_struct
));
278 struct net_device
* __init
sun3_82586_probe(int unit
)
280 struct net_device
*dev
;
281 unsigned long ioaddr
;
282 static int found
= 0;
285 /* check that this machine has an onboard 82586 */
286 switch(idprom
->id_machtype
) {
287 case SM_SUN3
|SM_3_160
:
288 case SM_SUN3
|SM_3_260
:
289 /* these machines have 82586 */
293 return ERR_PTR(-ENODEV
);
297 return ERR_PTR(-ENODEV
);
299 ioaddr
= (unsigned long)ioremap(IE_OBIO
, SUN3_82586_TOTAL_SIZE
);
301 return ERR_PTR(-ENOMEM
);
304 dev
= alloc_etherdev(sizeof(struct priv
));
308 sprintf(dev
->name
, "eth%d", unit
);
309 netdev_boot_setup_check(dev
);
313 dev
->base_addr
= ioaddr
;
314 err
= sun3_82586_probe1(dev
, ioaddr
);
317 err
= register_netdev(dev
);
323 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
327 iounmap((void __iomem
*)ioaddr
);
331 static const struct net_device_ops sun3_82586_netdev_ops
= {
332 .ndo_open
= sun3_82586_open
,
333 .ndo_stop
= sun3_82586_close
,
334 .ndo_start_xmit
= sun3_82586_send_packet
,
335 .ndo_set_rx_mode
= set_multicast_list
,
336 .ndo_tx_timeout
= sun3_82586_timeout
,
337 .ndo_get_stats
= sun3_82586_get_stats
,
338 .ndo_validate_addr
= eth_validate_addr
,
339 .ndo_set_mac_address
= eth_mac_addr
,
340 .ndo_change_mtu
= eth_change_mtu
,
343 static int __init
sun3_82586_probe1(struct net_device
*dev
,int ioaddr
)
347 if (!request_region(ioaddr
, SUN3_82586_TOTAL_SIZE
, DRV_NAME
))
350 /* copy in the ethernet address from the prom */
351 for(i
= 0; i
< 6 ; i
++)
352 dev
->dev_addr
[i
] = idprom
->id_ethaddr
[i
];
354 printk("%s: SUN3 Intel 82586 found at %lx, ",dev
->name
,dev
->base_addr
);
357 * check (or search) IO-Memory, 32K
361 dev
->mem_start
= (unsigned long)dvma_malloc_align(0x8000, 0x1000);
362 dev
->mem_end
= dev
->mem_start
+ size
;
364 if(size
!= 0x2000 && size
!= 0x4000 && size
!= 0x8000) {
365 printk("\n%s: Illegal memory size %d. Allowed is 0x2000 or 0x4000 or 0x8000 bytes.\n",dev
->name
,size
);
369 if(!check586(dev
,(char *) dev
->mem_start
,size
)) {
370 printk("?memcheck, Can't find memory at 0x%lx with size %d!\n",dev
->mem_start
,size
);
375 ((struct priv
*)netdev_priv(dev
))->memtop
=
376 (char *)dvma_btov(dev
->mem_start
);
377 ((struct priv
*)netdev_priv(dev
))->base
= (unsigned long) dvma_btov(0);
380 /* set number of receive-buffs according to memsize */
382 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
384 else if(size
== 0x4000)
385 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
388 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
391 printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev
->mem_start
,size
, dev
->irq
);
393 dev
->netdev_ops
= &sun3_82586_netdev_ops
;
394 dev
->watchdog_timeo
= HZ
/20;
399 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
404 static int init586(struct net_device
*dev
)
408 struct priv
*p
= netdev_priv(dev
);
409 volatile struct configure_cmd_struct
*cfg_cmd
;
410 volatile struct iasetup_cmd_struct
*ias_cmd
;
411 volatile struct tdr_cmd_struct
*tdr_cmd
;
412 volatile struct mcsetup_cmd_struct
*mc_cmd
;
413 struct netdev_hw_addr
*ha
;
414 int num_addrs
=netdev_mc_count(dev
);
416 ptr
= (void *) ((char *)p
->scb
+ sizeof(struct scb_struct
));
418 cfg_cmd
= (struct configure_cmd_struct
*)ptr
; /* configure-command */
419 cfg_cmd
->cmd_status
= 0;
420 cfg_cmd
->cmd_cmd
= swab16(CMD_CONFIGURE
| CMD_LAST
);
421 cfg_cmd
->cmd_link
= 0xffff;
423 cfg_cmd
->byte_cnt
= 0x0a; /* number of cfg bytes */
424 cfg_cmd
->fifo
= fifo
; /* fifo-limit (8=tx:32/rx:64) */
425 cfg_cmd
->sav_bf
= 0x40; /* hold or discard bad recv frames (bit 7) */
426 cfg_cmd
->adr_len
= 0x2e; /* addr_len |!src_insert |pre-len |loopback */
427 cfg_cmd
->priority
= 0x00;
429 cfg_cmd
->time_low
= 0x00;
430 cfg_cmd
->time_high
= 0xf2;
431 cfg_cmd
->promisc
= 0;
432 if(dev
->flags
& IFF_ALLMULTI
) {
433 int len
= ((char *) p
->iscp
- (char *) ptr
- 8) / 6;
434 if(num_addrs
> len
) {
435 printk("%s: switching to promisc. mode\n",dev
->name
);
436 cfg_cmd
->promisc
= 1;
439 if(dev
->flags
&IFF_PROMISC
)
440 cfg_cmd
->promisc
= 1;
441 cfg_cmd
->carr_coll
= 0x00;
443 p
->scb
->cbl_offset
= make16(cfg_cmd
);
446 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
449 WAIT_4_STAT_COMPL(cfg_cmd
);
451 if((swab16(cfg_cmd
->cmd_status
) & (STAT_OK
|STAT_COMPL
)) != (STAT_COMPL
|STAT_OK
))
453 printk("%s: configure command failed: %x\n",dev
->name
,swab16(cfg_cmd
->cmd_status
));
458 * individual address setup
461 ias_cmd
= (struct iasetup_cmd_struct
*)ptr
;
463 ias_cmd
->cmd_status
= 0;
464 ias_cmd
->cmd_cmd
= swab16(CMD_IASETUP
| CMD_LAST
);
465 ias_cmd
->cmd_link
= 0xffff;
467 memcpy((char *)&ias_cmd
->iaddr
,(char *) dev
->dev_addr
,ETH_ALEN
);
469 p
->scb
->cbl_offset
= make16(ias_cmd
);
471 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
474 WAIT_4_STAT_COMPL(ias_cmd
);
476 if((swab16(ias_cmd
->cmd_status
) & (STAT_OK
|STAT_COMPL
)) != (STAT_OK
|STAT_COMPL
)) {
477 printk("%s (82586): individual address setup command failed: %04x\n",dev
->name
,swab16(ias_cmd
->cmd_status
));
482 * TDR, wire check .. e.g. no resistor e.t.c
485 tdr_cmd
= (struct tdr_cmd_struct
*)ptr
;
487 tdr_cmd
->cmd_status
= 0;
488 tdr_cmd
->cmd_cmd
= swab16(CMD_TDR
| CMD_LAST
);
489 tdr_cmd
->cmd_link
= 0xffff;
492 p
->scb
->cbl_offset
= make16(tdr_cmd
);
493 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
496 WAIT_4_STAT_COMPL(tdr_cmd
);
498 if(!(swab16(tdr_cmd
->cmd_status
) & STAT_COMPL
))
500 printk("%s: Problems while running the TDR.\n",dev
->name
);
504 DELAY_16(); /* wait for result */
505 result
= swab16(tdr_cmd
->status
);
507 p
->scb
->cmd_cuc
= p
->scb
->cus
& STAT_MASK
;
508 sun3_attn586(); /* ack the interrupts */
510 if(result
& TDR_LNK_OK
)
512 else if(result
& TDR_XCVR_PRB
)
513 printk("%s: TDR: Transceiver problem. Check the cable(s)!\n",dev
->name
);
514 else if(result
& TDR_ET_OPN
)
515 printk("%s: TDR: No correct termination %d clocks away.\n",dev
->name
,result
& TDR_TIMEMASK
);
516 else if(result
& TDR_ET_SRT
)
518 if (result
& TDR_TIMEMASK
) /* time == 0 -> strange :-) */
519 printk("%s: TDR: Detected a short circuit %d clocks away.\n",dev
->name
,result
& TDR_TIMEMASK
);
522 printk("%s: TDR: Unknown status %04x\n",dev
->name
,result
);
528 if(num_addrs
&& !(dev
->flags
& IFF_PROMISC
) )
530 mc_cmd
= (struct mcsetup_cmd_struct
*) ptr
;
531 mc_cmd
->cmd_status
= 0;
532 mc_cmd
->cmd_cmd
= swab16(CMD_MCSETUP
| CMD_LAST
);
533 mc_cmd
->cmd_link
= 0xffff;
534 mc_cmd
->mc_cnt
= swab16(num_addrs
* 6);
537 netdev_for_each_mc_addr(ha
, dev
)
538 memcpy((char *) mc_cmd
->mc_list
[i
++],
541 p
->scb
->cbl_offset
= make16(mc_cmd
);
542 p
->scb
->cmd_cuc
= CUC_START
;
545 WAIT_4_STAT_COMPL(mc_cmd
);
547 if( (swab16(mc_cmd
->cmd_status
) & (STAT_COMPL
|STAT_OK
)) != (STAT_COMPL
|STAT_OK
) )
548 printk("%s: Can't apply multicast-address-list.\n",dev
->name
);
552 * alloc nop/xmit-cmds
554 #if (NUM_XMIT_BUFFS == 1)
557 p
->nop_cmds
[i
] = (struct nop_cmd_struct
*)ptr
;
558 p
->nop_cmds
[i
]->cmd_cmd
= swab16(CMD_NOP
);
559 p
->nop_cmds
[i
]->cmd_status
= 0;
560 p
->nop_cmds
[i
]->cmd_link
= make16((p
->nop_cmds
[i
]));
561 ptr
= (char *) ptr
+ sizeof(struct nop_cmd_struct
);
564 for(i
=0;i
<NUM_XMIT_BUFFS
;i
++)
566 p
->nop_cmds
[i
] = (struct nop_cmd_struct
*)ptr
;
567 p
->nop_cmds
[i
]->cmd_cmd
= swab16(CMD_NOP
);
568 p
->nop_cmds
[i
]->cmd_status
= 0;
569 p
->nop_cmds
[i
]->cmd_link
= make16((p
->nop_cmds
[i
]));
570 ptr
= (char *) ptr
+ sizeof(struct nop_cmd_struct
);
574 ptr
= alloc_rfa(dev
,ptr
); /* init receive-frame-area */
577 * alloc xmit-buffs / init xmit_cmds
579 for(i
=0;i
<NUM_XMIT_BUFFS
;i
++)
581 p
->xmit_cmds
[i
] = (struct transmit_cmd_struct
*)ptr
; /*transmit cmd/buff 0*/
582 ptr
= (char *) ptr
+ sizeof(struct transmit_cmd_struct
);
583 p
->xmit_cbuffs
[i
] = (char *)ptr
; /* char-buffs */
584 ptr
= (char *) ptr
+ XMIT_BUFF_SIZE
;
585 p
->xmit_buffs
[i
] = (struct tbd_struct
*)ptr
; /* TBD */
586 ptr
= (char *) ptr
+ sizeof(struct tbd_struct
);
587 if(ptr
> (void *)dev
->mem_end
)
589 printk("%s: not enough shared-mem for your configuration!\n",dev
->name
);
592 memset((char *)(p
->xmit_cmds
[i
]) ,0, sizeof(struct transmit_cmd_struct
));
593 memset((char *)(p
->xmit_buffs
[i
]),0, sizeof(struct tbd_struct
));
594 p
->xmit_cmds
[i
]->cmd_link
= make16(p
->nop_cmds
[(i
+1)%NUM_XMIT_BUFFS
]);
595 p
->xmit_cmds
[i
]->cmd_status
= swab16(STAT_COMPL
);
596 p
->xmit_cmds
[i
]->cmd_cmd
= swab16(CMD_XMIT
| CMD_INT
);
597 p
->xmit_cmds
[i
]->tbd_offset
= make16((p
->xmit_buffs
[i
]));
598 p
->xmit_buffs
[i
]->next
= 0xffff;
599 p
->xmit_buffs
[i
]->buffer
= make24((p
->xmit_cbuffs
[i
]));
604 #ifndef NO_NOPCOMMANDS
609 * 'start transmitter'
611 #ifndef NO_NOPCOMMANDS
612 p
->scb
->cbl_offset
= make16(p
->nop_cmds
[0]);
613 p
->scb
->cmd_cuc
= CUC_START
;
617 p
->xmit_cmds
[0]->cmd_link
= make16(p
->xmit_cmds
[0]);
618 p
->xmit_cmds
[0]->cmd_cmd
= swab16(CMD_XMIT
| CMD_SUSPEND
| CMD_INT
);
624 p
->scb
->cmd_cuc
= p
->scb
->cus
& STAT_MASK
;
634 /******************************************************
635 * This is a helper routine for sun3_82586_rnr_int() and init586().
636 * It sets up the Receive Frame Area (RFA).
639 static void *alloc_rfa(struct net_device
*dev
,void *ptr
)
641 volatile struct rfd_struct
*rfd
= (struct rfd_struct
*)ptr
;
642 volatile struct rbd_struct
*rbd
;
644 struct priv
*p
= netdev_priv(dev
);
646 memset((char *) rfd
,0,sizeof(struct rfd_struct
)*(p
->num_recv_buffs
+rfdadd
));
649 for(i
= 0; i
< (p
->num_recv_buffs
+rfdadd
); i
++) {
650 rfd
[i
].next
= make16(rfd
+ (i
+1) % (p
->num_recv_buffs
+rfdadd
) );
651 rfd
[i
].rbd_offset
= 0xffff;
653 rfd
[p
->num_recv_buffs
-1+rfdadd
].last
= RFD_SUSP
; /* RU suspend */
655 ptr
= (void *) (rfd
+ (p
->num_recv_buffs
+ rfdadd
) );
657 rbd
= (struct rbd_struct
*) ptr
;
658 ptr
= (void *) (rbd
+ p
->num_recv_buffs
);
660 /* clr descriptors */
661 memset((char *) rbd
,0,sizeof(struct rbd_struct
)*(p
->num_recv_buffs
));
663 for(i
=0;i
<p
->num_recv_buffs
;i
++)
665 rbd
[i
].next
= make16((rbd
+ (i
+1) % p
->num_recv_buffs
));
666 rbd
[i
].size
= swab16(RECV_BUFF_SIZE
);
667 rbd
[i
].buffer
= make24(ptr
);
668 ptr
= (char *) ptr
+ RECV_BUFF_SIZE
;
671 p
->rfd_top
= p
->rfd_first
;
672 p
->rfd_last
= p
->rfd_first
+ (p
->num_recv_buffs
- 1 + rfdadd
);
674 p
->scb
->rfa_offset
= make16(p
->rfd_first
);
675 p
->rfd_first
->rbd_offset
= make16(rbd
);
681 /**************************************************
682 * Interrupt Handler ...
685 static irqreturn_t
sun3_82586_interrupt(int irq
,void *dev_id
)
687 struct net_device
*dev
= dev_id
;
693 printk ("sun3_82586-interrupt: irq %d for unknown device.\n",irq
);
696 p
= netdev_priv(dev
);
701 WAIT_4_SCB_CMD(); /* wait for last command */
703 while((stat
=p
->scb
->cus
& STAT_MASK
))
705 p
->scb
->cmd_cuc
= stat
;
708 if(stat
& STAT_FR
) /* received a frame */
709 sun3_82586_rcv_int(dev
);
711 if(stat
& STAT_RNR
) /* RU went 'not ready' */
714 if(p
->scb
->rus
& RU_SUSPEND
) /* special case: RU_SUSPEND */
717 p
->scb
->cmd_ruc
= RUC_RESUME
;
719 WAIT_4_SCB_CMD_RUC();
723 printk("%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",dev
->name
,(int) stat
,(int) p
->scb
->rus
);
724 sun3_82586_rnr_int(dev
);
728 if(stat
& STAT_CX
) /* command with I-bit set complete */
729 sun3_82586_xmt_int(dev
);
731 #ifndef NO_NOPCOMMANDS
732 if(stat
& STAT_CNA
) /* CU went 'not ready' */
734 if(netif_running(dev
))
735 printk("%s: oops! CU has left active state. stat: %04x/%02x.\n",dev
->name
,(int) stat
,(int) p
->scb
->cus
);
742 WAIT_4_SCB_CMD(); /* wait for ack. (sun3_82586_xmt_int can be faster than ack!!) */
743 if(p
->scb
->cmd_cuc
) /* timed out? */
745 printk("%s: Acknowledge timed out.\n",dev
->name
);
756 /*******************************************************
760 static void sun3_82586_rcv_int(struct net_device
*dev
)
763 unsigned short totlen
;
765 struct rbd_struct
*rbd
;
766 struct priv
*p
= netdev_priv(dev
);
771 for(;(status
= p
->rfd_top
->stat_high
) & RFD_COMPL
;)
773 rbd
= (struct rbd_struct
*) make32(p
->rfd_top
->rbd_offset
);
775 if(status
& RFD_OK
) /* frame received without error? */
777 if( (totlen
= swab16(rbd
->status
)) & RBD_LAST
) /* the first and the last buffer? */
779 totlen
&= RBD_MASK
; /* length of this frame */
781 skb
= netdev_alloc_skb(dev
, totlen
+ 2);
786 skb_copy_to_linear_data(skb
,(char *) p
->base
+swab32((unsigned long) rbd
->buffer
),totlen
);
787 skb
->protocol
=eth_type_trans(skb
,dev
);
789 dev
->stats
.rx_packets
++;
792 dev
->stats
.rx_dropped
++;
797 /* free all RBD's until RBD_LAST is set */
799 while(!((rstat
=swab16(rbd
->status
)) & RBD_LAST
))
801 totlen
+= rstat
& RBD_MASK
;
804 printk("%s: Whoops .. no end mark in RBD list\n",dev
->name
);
808 rbd
= (struct rbd_struct
*) make32(rbd
->next
);
810 totlen
+= rstat
& RBD_MASK
;
812 printk("%s: received oversized frame! length: %d\n",dev
->name
,totlen
);
813 dev
->stats
.rx_dropped
++;
816 else /* frame !(ok), only with 'save-bad-frames' */
818 printk("%s: oops! rfd-error-status: %04x\n",dev
->name
,status
);
819 dev
->stats
.rx_errors
++;
821 p
->rfd_top
->stat_high
= 0;
822 p
->rfd_top
->last
= RFD_SUSP
; /* maybe exchange by RFD_LAST */
823 p
->rfd_top
->rbd_offset
= 0xffff;
824 p
->rfd_last
->last
= 0; /* delete RFD_SUSP */
825 p
->rfd_last
= p
->rfd_top
;
826 p
->rfd_top
= (struct rfd_struct
*) make32(p
->rfd_top
->next
); /* step to next RFD */
827 p
->scb
->rfa_offset
= make16(p
->rfd_top
);
836 p
->scb
->cmd_ruc
= RUC_RESUME
;
838 WAIT_4_SCB_CMD_RUC();
846 if(p
->rfd_top
->status
)
850 printk("%s: RU hasn't fetched next RFD (not busy/complete)\n",dev
->name
);
859 volatile struct rfd_struct
*rfds
=p
->rfd_top
;
860 volatile struct rbd_struct
*rbds
;
861 printk("%s: received a FC intr. without having a frame: %04x %d\n",dev
->name
,status
,old_at_least
);
862 for(i
=0;i
< (p
->num_recv_buffs
+4);i
++)
864 rbds
= (struct rbd_struct
*) make32(rfds
->rbd_offset
);
865 printk("%04x:%04x ",rfds
->status
,rbds
->status
);
866 rfds
= (struct rfd_struct
*) make32(rfds
->next
);
868 printk("\nerrs: %04x %04x stat: %04x\n",(int)p
->scb
->rsc_errs
,(int)p
->scb
->ovrn_errs
,(int)p
->scb
->status
);
869 printk("\nerrs: %04x %04x rus: %02x, cus: %02x\n",(int)p
->scb
->rsc_errs
,(int)p
->scb
->ovrn_errs
,(int)p
->scb
->rus
,(int)p
->scb
->cus
);
871 old_at_least
= at_least_one
;
878 /**********************************************************
879 * handle 'Receiver went not ready'.
882 static void sun3_82586_rnr_int(struct net_device
*dev
)
884 struct priv
*p
= netdev_priv(dev
);
886 dev
->stats
.rx_errors
++;
888 WAIT_4_SCB_CMD(); /* wait for the last cmd, WAIT_4_FULLSTAT?? */
889 p
->scb
->cmd_ruc
= RUC_ABORT
; /* usually the RU is in the 'no resource'-state .. abort it now. */
891 WAIT_4_SCB_CMD_RUC(); /* wait for accept cmd. */
893 alloc_rfa(dev
,(char *)p
->rfd_first
);
894 /* maybe add a check here, before restarting the RU */
895 startrecv586(dev
); /* restart RU */
897 printk("%s: Receive-Unit restarted. Status: %04x\n",dev
->name
,p
->scb
->rus
);
901 /**********************************************************
902 * handle xmit - interrupt
905 static void sun3_82586_xmt_int(struct net_device
*dev
)
908 struct priv
*p
= netdev_priv(dev
);
913 status
= swab16(p
->xmit_cmds
[p
->xmit_last
]->cmd_status
);
914 if(!(status
& STAT_COMPL
))
915 printk("%s: strange .. xmit-int without a 'COMPLETE'\n",dev
->name
);
919 dev
->stats
.tx_packets
++;
920 dev
->stats
.collisions
+= (status
& TCMD_MAXCOLLMASK
);
924 dev
->stats
.tx_errors
++;
925 if(status
& TCMD_LATECOLL
) {
926 printk("%s: late collision detected.\n",dev
->name
);
927 dev
->stats
.collisions
++;
929 else if(status
& TCMD_NOCARRIER
) {
930 dev
->stats
.tx_carrier_errors
++;
931 printk("%s: no carrier detected.\n",dev
->name
);
933 else if(status
& TCMD_LOSTCTS
)
934 printk("%s: loss of CTS detected.\n",dev
->name
);
935 else if(status
& TCMD_UNDERRUN
) {
936 dev
->stats
.tx_fifo_errors
++;
937 printk("%s: DMA underrun detected.\n",dev
->name
);
939 else if(status
& TCMD_MAXCOLL
) {
940 printk("%s: Max. collisions exceeded.\n",dev
->name
);
941 dev
->stats
.collisions
+= 16;
945 #if (NUM_XMIT_BUFFS > 1)
946 if( (++p
->xmit_last
) == NUM_XMIT_BUFFS
)
949 netif_wake_queue(dev
);
952 /***********************************************************
953 * (re)start the receiver
956 static void startrecv586(struct net_device
*dev
)
958 struct priv
*p
= netdev_priv(dev
);
961 WAIT_4_SCB_CMD_RUC();
962 p
->scb
->rfa_offset
= make16(p
->rfd_first
);
963 p
->scb
->cmd_ruc
= RUC_START
;
964 sun3_attn586(); /* start cmd. */
965 WAIT_4_SCB_CMD_RUC(); /* wait for accept cmd. (no timeout!!) */
968 static void sun3_82586_timeout(struct net_device
*dev
)
970 struct priv
*p
= netdev_priv(dev
);
971 #ifndef NO_NOPCOMMANDS
972 if(p
->scb
->cus
& CU_ACTIVE
) /* COMMAND-UNIT active? */
974 netif_wake_queue(dev
);
976 printk("%s: strange ... timeout with CU active?!?\n",dev
->name
);
977 printk("%s: X0: %04x N0: %04x N1: %04x %d\n",dev
->name
,(int)swab16(p
->xmit_cmds
[0]->cmd_status
),(int)swab16(p
->nop_cmds
[0]->cmd_status
),(int)swab16(p
->nop_cmds
[1]->cmd_status
),(int)p
->nop_point
);
979 p
->scb
->cmd_cuc
= CUC_ABORT
;
982 p
->scb
->cbl_offset
= make16(p
->nop_cmds
[p
->nop_point
]);
983 p
->scb
->cmd_cuc
= CUC_START
;
986 netif_trans_update(dev
); /* prevent tx timeout */
992 printk("%s: xmitter timed out, try to restart! stat: %02x\n",dev
->name
,p
->scb
->cus
);
993 printk("%s: command-stats: %04x %04x\n",dev
->name
,swab16(p
->xmit_cmds
[0]->cmd_status
),swab16(p
->xmit_cmds
[1]->cmd_status
));
994 printk("%s: check, whether you set the right interrupt number!\n",dev
->name
);
996 sun3_82586_close(dev
);
997 sun3_82586_open(dev
);
999 netif_trans_update(dev
); /* prevent tx timeout */
1002 /******************************************************
1006 static int sun3_82586_send_packet(struct sk_buff
*skb
, struct net_device
*dev
)
1009 #ifndef NO_NOPCOMMANDS
1012 struct priv
*p
= netdev_priv(dev
);
1014 if(skb
->len
> XMIT_BUFF_SIZE
)
1016 printk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n",dev
->name
,XMIT_BUFF_SIZE
,skb
->len
);
1017 return NETDEV_TX_OK
;
1020 netif_stop_queue(dev
);
1022 #if(NUM_XMIT_BUFFS > 1)
1023 if(test_and_set_bit(0,(void *) &p
->lock
)) {
1024 printk("%s: Queue was locked\n",dev
->name
);
1025 return NETDEV_TX_BUSY
;
1031 if (len
< ETH_ZLEN
) {
1032 memset((void *)p
->xmit_cbuffs
[p
->xmit_count
], 0,
1036 skb_copy_from_linear_data(skb
, (void *)p
->xmit_cbuffs
[p
->xmit_count
], skb
->len
);
1038 #if (NUM_XMIT_BUFFS == 1)
1039 # ifdef NO_NOPCOMMANDS
1042 if(p
->scb
->cus
& CU_ACTIVE
)
1044 printk("%s: Hmmm .. CU is still running and we wanna send a new packet.\n",dev
->name
);
1045 printk("%s: stat: %04x %04x\n",dev
->name
,p
->scb
->cus
,swab16(p
->xmit_cmds
[0]->cmd_status
));
1049 p
->xmit_buffs
[0]->size
= swab16(TBD_LAST
| len
);
1052 p
->xmit_cmds
[0]->cmd_status
= 0;
1054 if( (p
->scb
->cus
& CU_STATUS
) == CU_SUSPEND
)
1055 p
->scb
->cmd_cuc
= CUC_RESUME
;
1058 p
->scb
->cbl_offset
= make16(p
->xmit_cmds
[0]);
1059 p
->scb
->cmd_cuc
= CUC_START
;
1066 if( (p
->scb
->cus
& CU_ACTIVE
)) /* test it, because CU sometimes doesn't start immediately */
1068 if(p
->xmit_cmds
[0]->cmd_status
)
1071 printk("%s: Can't start transmit-command.\n",dev
->name
);
1074 next_nop
= (p
->nop_point
+ 1) & 0x1;
1075 p
->xmit_buffs
[0]->size
= swab16(TBD_LAST
| len
);
1077 p
->xmit_cmds
[0]->cmd_link
= p
->nop_cmds
[next_nop
]->cmd_link
1078 = make16((p
->nop_cmds
[next_nop
]));
1079 p
->xmit_cmds
[0]->cmd_status
= p
->nop_cmds
[next_nop
]->cmd_status
= 0;
1081 p
->nop_cmds
[p
->nop_point
]->cmd_link
= make16((p
->xmit_cmds
[0]));
1082 p
->nop_point
= next_nop
;
1086 p
->xmit_buffs
[p
->xmit_count
]->size
= swab16(TBD_LAST
| len
);
1087 if( (next_nop
= p
->xmit_count
+ 1) == NUM_XMIT_BUFFS
)
1090 p
->xmit_cmds
[p
->xmit_count
]->cmd_status
= 0;
1091 /* linkpointer of xmit-command already points to next nop cmd */
1092 p
->nop_cmds
[next_nop
]->cmd_link
= make16((p
->nop_cmds
[next_nop
]));
1093 p
->nop_cmds
[next_nop
]->cmd_status
= 0;
1095 p
->nop_cmds
[p
->xmit_count
]->cmd_link
= make16((p
->xmit_cmds
[p
->xmit_count
]));
1096 p
->xmit_count
= next_nop
;
1099 unsigned long flags
;
1100 local_irq_save(flags
);
1101 if(p
->xmit_count
!= p
->xmit_last
)
1102 netif_wake_queue(dev
);
1104 local_irq_restore(flags
);
1109 return NETDEV_TX_OK
;
1112 /*******************************************
1113 * Someone wanna have the statistics
1116 static struct net_device_stats
*sun3_82586_get_stats(struct net_device
*dev
)
1118 struct priv
*p
= netdev_priv(dev
);
1119 unsigned short crc
,aln
,rsc
,ovrn
;
1121 crc
= swab16(p
->scb
->crc_errs
); /* get error-statistic from the ni82586 */
1122 p
->scb
->crc_errs
= 0;
1123 aln
= swab16(p
->scb
->aln_errs
);
1124 p
->scb
->aln_errs
= 0;
1125 rsc
= swab16(p
->scb
->rsc_errs
);
1126 p
->scb
->rsc_errs
= 0;
1127 ovrn
= swab16(p
->scb
->ovrn_errs
);
1128 p
->scb
->ovrn_errs
= 0;
1130 dev
->stats
.rx_crc_errors
+= crc
;
1131 dev
->stats
.rx_fifo_errors
+= ovrn
;
1132 dev
->stats
.rx_frame_errors
+= aln
;
1133 dev
->stats
.rx_dropped
+= rsc
;
1138 /********************************************************
1142 static void set_multicast_list(struct net_device
*dev
)
1144 netif_stop_queue(dev
);
1150 netif_wake_queue(dev
);
1155 * DUMP .. we expect a not running CMD unit and enough space
1157 void sun3_82586_dump(struct net_device
*dev
,void *ptr
)
1159 struct priv
*p
= netdev_priv(dev
);
1160 struct dump_cmd_struct
*dump_cmd
= (struct dump_cmd_struct
*) ptr
;
1163 p
->scb
->cmd_cuc
= CUC_ABORT
;
1166 WAIT_4_SCB_CMD_RUC();
1168 dump_cmd
->cmd_status
= 0;
1169 dump_cmd
->cmd_cmd
= CMD_DUMP
| CMD_LAST
;
1170 dump_cmd
->dump_offset
= make16((dump_cmd
+ 1));
1171 dump_cmd
->cmd_link
= 0xffff;
1173 p
->scb
->cbl_offset
= make16(dump_cmd
);
1174 p
->scb
->cmd_cuc
= CUC_START
;
1176 WAIT_4_STAT_COMPL(dump_cmd
);
1178 if( (dump_cmd
->cmd_status
& (STAT_COMPL
|STAT_OK
)) != (STAT_COMPL
|STAT_OK
) )
1179 printk("%s: Can't get dump information.\n",dev
->name
);
1181 for(i
=0;i
<170;i
++) {
1182 printk("%02x ",(int) ((unsigned char *) (dump_cmd
+ 1))[i
]);