?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
pvrusb2: reduce stack usage pvr2_eeprom_analyze()
[linux/fpc-iii.git] / drivers / net / ethernet / intel / fm10k / fm10k_pci.c
blobb1a2f8437d5965535e9e779053ed1bdb8fd22edd
1 /* Intel(R) Ethernet Switch Host Interface Driver
2 * Copyright(c) 2013 - 2016 Intel Corporation.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
12 *
13 * The full GNU General Public License is included in this distribution in
14 * the file called "COPYING".
15 *
16 * Contact Information:
17 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
18 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
19 */
20
21 #include <linux/module.h>
22 #include <linux/aer.h>
23
24 #include "fm10k.h"
25
26 static const struct fm10k_info *fm10k_info_tbl[] = {
27 [fm10k_device_pf] = &fm10k_pf_info,
28 [fm10k_device_vf] = &fm10k_vf_info,
29 };
30
31 /**
32 * fm10k_pci_tbl - PCI Device ID Table
33 *
34 * Wildcard entries (PCI_ANY_ID) should come last
35 * Last entry must be all 0s
36 *
37 * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
38 * Class, Class Mask, private data (not used) }
39 */
40 static const struct pci_device_id fm10k_pci_tbl[] = {
41 { PCI_VDEVICE(INTEL, FM10K_DEV_ID_PF), fm10k_device_pf },
42 { PCI_VDEVICE(INTEL, FM10K_DEV_ID_VF), fm10k_device_vf },
43 /* required last entry */
44 { 0, }
45 };
46 MODULE_DEVICE_TABLE(pci, fm10k_pci_tbl);
47
48 u16 fm10k_read_pci_cfg_word(struct fm10k_hw *hw, u32 reg)
49 {
50 struct fm10k_intfc *interface = hw->back;
51 u16 value = 0;
52
53 if (FM10K_REMOVED(hw->hw_addr))
54 return ~value;
55
56 pci_read_config_word(interface->pdev, reg, &value);
57 if (value == 0xFFFF)
58 fm10k_write_flush(hw);
59
60 return value;
61 }
62
63 u32 fm10k_read_reg(struct fm10k_hw *hw, int reg)
64 {
65 u32 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
66 u32 value = 0;
67
68 if (FM10K_REMOVED(hw_addr))
69 return ~value;
70
71 value = readl(&hw_addr[reg]);
72 if (!(~value) && (!reg || !(~readl(hw_addr)))) {
73 struct fm10k_intfc *interface = hw->back;
74 struct net_device *netdev = interface->netdev;
75
76 hw->hw_addr = NULL;
77 netif_device_detach(netdev);
78 netdev_err(netdev, "PCIe link lost, device now detached\n");
79 }
80
81 return value;
82 }
83
84 static int fm10k_hw_ready(struct fm10k_intfc *interface)
85 {
86 struct fm10k_hw *hw = &interface->hw;
87
88 fm10k_write_flush(hw);
89
90 return FM10K_REMOVED(hw->hw_addr) ? -ENODEV : 0;
91 }
92
93 void fm10k_service_event_schedule(struct fm10k_intfc *interface)
94 {
95 if (!test_bit(__FM10K_SERVICE_DISABLE, &interface->state) &&
96 !test_and_set_bit(__FM10K_SERVICE_SCHED, &interface->state))
97 queue_work(fm10k_workqueue, &interface->service_task);
98 }
99
100 static void fm10k_service_event_complete(struct fm10k_intfc *interface)
101 {
102 WARN_ON(!test_bit(__FM10K_SERVICE_SCHED, &interface->state));
103
104 /* flush memory to make sure state is correct before next watchog */
105 smp_mb__before_atomic();
106 clear_bit(__FM10K_SERVICE_SCHED, &interface->state);
107 }
108
109 /**
110 * fm10k_service_timer - Timer Call-back
111 * @data: pointer to interface cast into an unsigned long
112 **/
113 static void fm10k_service_timer(unsigned long data)
114 {
115 struct fm10k_intfc *interface = (struct fm10k_intfc *)data;
116
117 /* Reset the timer */
118 mod_timer(&interface->service_timer, (HZ * 2) + jiffies);
119
120 fm10k_service_event_schedule(interface);
121 }
122
123 static void fm10k_detach_subtask(struct fm10k_intfc *interface)
124 {
125 struct net_device *netdev = interface->netdev;
126 u32 __iomem *hw_addr;
127 u32 value;
128
129 /* do nothing if device is still present or hw_addr is set */
130 if (netif_device_present(netdev) || interface->hw.hw_addr)
131 return;
132
133 /* check the real address space to see if we've recovered */
134 hw_addr = READ_ONCE(interface->uc_addr);
135 value = readl(hw_addr);
136 if (~value) {
137 interface->hw.hw_addr = interface->uc_addr;
138 netif_device_attach(netdev);
139 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
140 netdev_warn(netdev, "PCIe link restored, device now attached\n");
141 return;
142 }
143
144 rtnl_lock();
145
146 if (netif_running(netdev))
147 dev_close(netdev);
148
149 rtnl_unlock();
150 }
151
152 static void fm10k_prepare_for_reset(struct fm10k_intfc *interface)
153 {
154 struct net_device *netdev = interface->netdev;
155
156 WARN_ON(in_interrupt());
157
158 /* put off any impending NetWatchDogTimeout */
159 netif_trans_update(netdev);
160
161 while (test_and_set_bit(__FM10K_RESETTING, &interface->state))
162 usleep_range(1000, 2000);
163
164 rtnl_lock();
165
166 fm10k_iov_suspend(interface->pdev);
167
168 if (netif_running(netdev))
169 fm10k_close(netdev);
170
171 fm10k_mbx_free_irq(interface);
172
173 /* free interrupts */
174 fm10k_clear_queueing_scheme(interface);
175
176 /* delay any future reset requests */
177 interface->last_reset = jiffies + (10 * HZ);
178
179 rtnl_unlock();
180 }
181
182 static int fm10k_handle_reset(struct fm10k_intfc *interface)
183 {
184 struct net_device *netdev = interface->netdev;
185 struct fm10k_hw *hw = &interface->hw;
186 int err;
187
188 rtnl_lock();
189
190 pci_set_master(interface->pdev);
191
192 /* reset and initialize the hardware so it is in a known state */
193 err = hw->mac.ops.reset_hw(hw);
194 if (err) {
195 dev_err(&interface->pdev->dev, "reset_hw failed: %d\n", err);
196 goto reinit_err;
197 }
198
199 err = hw->mac.ops.init_hw(hw);
200 if (err) {
201 dev_err(&interface->pdev->dev, "init_hw failed: %d\n", err);
202 goto reinit_err;
203 }
204
205 err = fm10k_init_queueing_scheme(interface);
206 if (err) {
207 dev_err(&interface->pdev->dev,
208 "init_queueing_scheme failed: %d\n", err);
209 goto reinit_err;
210 }
211
212 /* re-associate interrupts */
213 err = fm10k_mbx_request_irq(interface);
214 if (err)
215 goto err_mbx_irq;
216
217 err = fm10k_hw_ready(interface);
218 if (err)
219 goto err_open;
220
221 /* update hardware address for VFs if perm_addr has changed */
222 if (hw->mac.type == fm10k_mac_vf) {
223 if (is_valid_ether_addr(hw->mac.perm_addr)) {
224 ether_addr_copy(hw->mac.addr, hw->mac.perm_addr);
225 ether_addr_copy(netdev->perm_addr, hw->mac.perm_addr);
226 ether_addr_copy(netdev->dev_addr, hw->mac.perm_addr);
227 netdev->addr_assign_type &= ~NET_ADDR_RANDOM;
228 }
229
230 if (hw->mac.vlan_override)
231 netdev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
232 else
233 netdev->features |= NETIF_F_HW_VLAN_CTAG_RX;
234 }
235
236 err = netif_running(netdev) ? fm10k_open(netdev) : 0;
237 if (err)
238 goto err_open;
239
240 fm10k_iov_resume(interface->pdev);
241
242 rtnl_unlock();
243
244 clear_bit(__FM10K_RESETTING, &interface->state);
245
246 return err;
247 err_open:
248 fm10k_mbx_free_irq(interface);
249 err_mbx_irq:
250 fm10k_clear_queueing_scheme(interface);
251 reinit_err:
252 netif_device_detach(netdev);
253
254 rtnl_unlock();
255
256 clear_bit(__FM10K_RESETTING, &interface->state);
257
258 return err;
259 }
260
261 static void fm10k_reinit(struct fm10k_intfc *interface)
262 {
263 int err;
264
265 fm10k_prepare_for_reset(interface);
266
267 err = fm10k_handle_reset(interface);
268 if (err)
269 dev_err(&interface->pdev->dev,
270 "fm10k_handle_reset failed: %d\n", err);
271 }
272
273 static void fm10k_reset_subtask(struct fm10k_intfc *interface)
274 {
275 if (!(interface->flags & FM10K_FLAG_RESET_REQUESTED))
276 return;
277
278 interface->flags &= ~FM10K_FLAG_RESET_REQUESTED;
279
280 netdev_err(interface->netdev, "Reset interface\n");
281
282 fm10k_reinit(interface);
283 }
284
285 /**
286 * fm10k_configure_swpri_map - Configure Receive SWPRI to PC mapping
287 * @interface: board private structure
288 *
289 * Configure the SWPRI to PC mapping for the port.
290 **/
291 static void fm10k_configure_swpri_map(struct fm10k_intfc *interface)
292 {
293 struct net_device *netdev = interface->netdev;
294 struct fm10k_hw *hw = &interface->hw;
295 int i;
296
297 /* clear flag indicating update is needed */
298 interface->flags &= ~FM10K_FLAG_SWPRI_CONFIG;
299
300 /* these registers are only available on the PF */
301 if (hw->mac.type != fm10k_mac_pf)
302 return;
303
304 /* configure SWPRI to PC map */
305 for (i = 0; i < FM10K_SWPRI_MAX; i++)
306 fm10k_write_reg(hw, FM10K_SWPRI_MAP(i),
307 netdev_get_prio_tc_map(netdev, i));
308 }
309
310 /**
311 * fm10k_watchdog_update_host_state - Update the link status based on host.
312 * @interface: board private structure
313 **/
314 static void fm10k_watchdog_update_host_state(struct fm10k_intfc *interface)
315 {
316 struct fm10k_hw *hw = &interface->hw;
317 s32 err;
318
319 if (test_bit(__FM10K_LINK_DOWN, &interface->state)) {
320 interface->host_ready = false;
321 if (time_is_after_jiffies(interface->link_down_event))
322 return;
323 clear_bit(__FM10K_LINK_DOWN, &interface->state);
324 }
325
326 if (interface->flags & FM10K_FLAG_SWPRI_CONFIG) {
327 if (rtnl_trylock()) {
328 fm10k_configure_swpri_map(interface);
329 rtnl_unlock();
330 }
331 }
332
333 /* lock the mailbox for transmit and receive */
334 fm10k_mbx_lock(interface);
335
336 err = hw->mac.ops.get_host_state(hw, &interface->host_ready);
337 if (err && time_is_before_jiffies(interface->last_reset))
338 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
339
340 /* free the lock */
341 fm10k_mbx_unlock(interface);
342 }
343
344 /**
345 * fm10k_mbx_subtask - Process upstream and downstream mailboxes
346 * @interface: board private structure
347 *
348 * This function will process both the upstream and downstream mailboxes.
349 **/
350 static void fm10k_mbx_subtask(struct fm10k_intfc *interface)
351 {
352 /* process upstream mailbox and update device state */
353 fm10k_watchdog_update_host_state(interface);
354
355 /* process downstream mailboxes */
356 fm10k_iov_mbx(interface);
357 }
358
359 /**
360 * fm10k_watchdog_host_is_ready - Update netdev status based on host ready
361 * @interface: board private structure
362 **/
363 static void fm10k_watchdog_host_is_ready(struct fm10k_intfc *interface)
364 {
365 struct net_device *netdev = interface->netdev;
366
367 /* only continue if link state is currently down */
368 if (netif_carrier_ok(netdev))
369 return;
370
371 netif_info(interface, drv, netdev, "NIC Link is up\n");
372
373 netif_carrier_on(netdev);
374 netif_tx_wake_all_queues(netdev);
375 }
376
377 /**
378 * fm10k_watchdog_host_not_ready - Update netdev status based on host not ready
379 * @interface: board private structure
380 **/
381 static void fm10k_watchdog_host_not_ready(struct fm10k_intfc *interface)
382 {
383 struct net_device *netdev = interface->netdev;
384
385 /* only continue if link state is currently up */
386 if (!netif_carrier_ok(netdev))
387 return;
388
389 netif_info(interface, drv, netdev, "NIC Link is down\n");
390
391 netif_carrier_off(netdev);
392 netif_tx_stop_all_queues(netdev);
393 }
394
395 /**
396 * fm10k_update_stats - Update the board statistics counters.
397 * @interface: board private structure
398 **/
399 void fm10k_update_stats(struct fm10k_intfc *interface)
400 {
401 struct net_device_stats *net_stats = &interface->netdev->stats;
402 struct fm10k_hw *hw = &interface->hw;
403 u64 hw_csum_tx_good = 0, hw_csum_rx_good = 0, rx_length_errors = 0;
404 u64 rx_switch_errors = 0, rx_drops = 0, rx_pp_errors = 0;
405 u64 rx_link_errors = 0;
406 u64 rx_errors = 0, rx_csum_errors = 0, tx_csum_errors = 0;
407 u64 restart_queue = 0, tx_busy = 0, alloc_failed = 0;
408 u64 rx_bytes_nic = 0, rx_pkts_nic = 0, rx_drops_nic = 0;
409 u64 tx_bytes_nic = 0, tx_pkts_nic = 0;
410 u64 bytes, pkts;
411 int i;
412
413 /* ensure only one thread updates stats at a time */
414 if (test_and_set_bit(__FM10K_UPDATING_STATS, &interface->state))
415 return;
416
417 /* do not allow stats update via service task for next second */
418 interface->next_stats_update = jiffies + HZ;
419
420 /* gather some stats to the interface struct that are per queue */
421 for (bytes = 0, pkts = 0, i = 0; i < interface->num_tx_queues; i++) {
422 struct fm10k_ring *tx_ring = READ_ONCE(interface->tx_ring[i]);
423
424 if (!tx_ring)
425 continue;
426
427 restart_queue += tx_ring->tx_stats.restart_queue;
428 tx_busy += tx_ring->tx_stats.tx_busy;
429 tx_csum_errors += tx_ring->tx_stats.csum_err;
430 bytes += tx_ring->stats.bytes;
431 pkts += tx_ring->stats.packets;
432 hw_csum_tx_good += tx_ring->tx_stats.csum_good;
433 }
434
435 interface->restart_queue = restart_queue;
436 interface->tx_busy = tx_busy;
437 net_stats->tx_bytes = bytes;
438 net_stats->tx_packets = pkts;
439 interface->tx_csum_errors = tx_csum_errors;
440 interface->hw_csum_tx_good = hw_csum_tx_good;
441
442 /* gather some stats to the interface struct that are per queue */
443 for (bytes = 0, pkts = 0, i = 0; i < interface->num_rx_queues; i++) {
444 struct fm10k_ring *rx_ring = READ_ONCE(interface->rx_ring[i]);
445
446 if (!rx_ring)
447 continue;
448
449 bytes += rx_ring->stats.bytes;
450 pkts += rx_ring->stats.packets;
451 alloc_failed += rx_ring->rx_stats.alloc_failed;
452 rx_csum_errors += rx_ring->rx_stats.csum_err;
453 rx_errors += rx_ring->rx_stats.errors;
454 hw_csum_rx_good += rx_ring->rx_stats.csum_good;
455 rx_switch_errors += rx_ring->rx_stats.switch_errors;
456 rx_drops += rx_ring->rx_stats.drops;
457 rx_pp_errors += rx_ring->rx_stats.pp_errors;
458 rx_link_errors += rx_ring->rx_stats.link_errors;
459 rx_length_errors += rx_ring->rx_stats.length_errors;
460 }
461
462 net_stats->rx_bytes = bytes;
463 net_stats->rx_packets = pkts;
464 interface->alloc_failed = alloc_failed;
465 interface->rx_csum_errors = rx_csum_errors;
466 interface->hw_csum_rx_good = hw_csum_rx_good;
467 interface->rx_switch_errors = rx_switch_errors;
468 interface->rx_drops = rx_drops;
469 interface->rx_pp_errors = rx_pp_errors;
470 interface->rx_link_errors = rx_link_errors;
471 interface->rx_length_errors = rx_length_errors;
472
473 hw->mac.ops.update_hw_stats(hw, &interface->stats);
474
475 for (i = 0; i < hw->mac.max_queues; i++) {
476 struct fm10k_hw_stats_q *q = &interface->stats.q[i];
477
478 tx_bytes_nic += q->tx_bytes.count;
479 tx_pkts_nic += q->tx_packets.count;
480 rx_bytes_nic += q->rx_bytes.count;
481 rx_pkts_nic += q->rx_packets.count;
482 rx_drops_nic += q->rx_drops.count;
483 }
484
485 interface->tx_bytes_nic = tx_bytes_nic;
486 interface->tx_packets_nic = tx_pkts_nic;
487 interface->rx_bytes_nic = rx_bytes_nic;
488 interface->rx_packets_nic = rx_pkts_nic;
489 interface->rx_drops_nic = rx_drops_nic;
490
491 /* Fill out the OS statistics structure */
492 net_stats->rx_errors = rx_errors;
493 net_stats->rx_dropped = interface->stats.nodesc_drop.count;
494
495 clear_bit(__FM10K_UPDATING_STATS, &interface->state);
496 }
497
498 /**
499 * fm10k_watchdog_flush_tx - flush queues on host not ready
500 * @interface - pointer to the device interface structure
501 **/
502 static void fm10k_watchdog_flush_tx(struct fm10k_intfc *interface)
503 {
504 int some_tx_pending = 0;
505 int i;
506
507 /* nothing to do if carrier is up */
508 if (netif_carrier_ok(interface->netdev))
509 return;
510
511 for (i = 0; i < interface->num_tx_queues; i++) {
512 struct fm10k_ring *tx_ring = interface->tx_ring[i];
513
514 if (tx_ring->next_to_use != tx_ring->next_to_clean) {
515 some_tx_pending = 1;
516 break;
517 }
518 }
519
520 /* We've lost link, so the controller stops DMA, but we've got
521 * queued Tx work that's never going to get done, so reset
522 * controller to flush Tx.
523 */
524 if (some_tx_pending)
525 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
526 }
527
528 /**
529 * fm10k_watchdog_subtask - check and bring link up
530 * @interface - pointer to the device interface structure
531 **/
532 static void fm10k_watchdog_subtask(struct fm10k_intfc *interface)
533 {
534 /* if interface is down do nothing */
535 if (test_bit(__FM10K_DOWN, &interface->state) ||
536 test_bit(__FM10K_RESETTING, &interface->state))
537 return;
538
539 if (interface->host_ready)
540 fm10k_watchdog_host_is_ready(interface);
541 else
542 fm10k_watchdog_host_not_ready(interface);
543
544 /* update stats only once every second */
545 if (time_is_before_jiffies(interface->next_stats_update))
546 fm10k_update_stats(interface);
547
548 /* flush any uncompleted work */
549 fm10k_watchdog_flush_tx(interface);
550 }
551
552 /**
553 * fm10k_check_hang_subtask - check for hung queues and dropped interrupts
554 * @interface - pointer to the device interface structure
555 *
556 * This function serves two purposes. First it strobes the interrupt lines
557 * in order to make certain interrupts are occurring. Secondly it sets the
558 * bits needed to check for TX hangs. As a result we should immediately
559 * determine if a hang has occurred.
560 */
561 static void fm10k_check_hang_subtask(struct fm10k_intfc *interface)
562 {
563 int i;
564
565 /* If we're down or resetting, just bail */
566 if (test_bit(__FM10K_DOWN, &interface->state) ||
567 test_bit(__FM10K_RESETTING, &interface->state))
568 return;
569
570 /* rate limit tx hang checks to only once every 2 seconds */
571 if (time_is_after_eq_jiffies(interface->next_tx_hang_check))
572 return;
573 interface->next_tx_hang_check = jiffies + (2 * HZ);
574
575 if (netif_carrier_ok(interface->netdev)) {
576 /* Force detection of hung controller */
577 for (i = 0; i < interface->num_tx_queues; i++)
578 set_check_for_tx_hang(interface->tx_ring[i]);
579
580 /* Rearm all in-use q_vectors for immediate firing */
581 for (i = 0; i < interface->num_q_vectors; i++) {
582 struct fm10k_q_vector *qv = interface->q_vector[i];
583
584 if (!qv->tx.count && !qv->rx.count)
585 continue;
586 writel(FM10K_ITR_ENABLE | FM10K_ITR_PENDING2, qv->itr);
587 }
588 }
589 }
590
591 /**
592 * fm10k_service_task - manages and runs subtasks
593 * @work: pointer to work_struct containing our data
594 **/
595 static void fm10k_service_task(struct work_struct *work)
596 {
597 struct fm10k_intfc *interface;
598
599 interface = container_of(work, struct fm10k_intfc, service_task);
600
601 /* tasks run even when interface is down */
602 fm10k_mbx_subtask(interface);
603 fm10k_detach_subtask(interface);
604 fm10k_reset_subtask(interface);
605
606 /* tasks only run when interface is up */
607 fm10k_watchdog_subtask(interface);
608 fm10k_check_hang_subtask(interface);
609
610 /* release lock on service events to allow scheduling next event */
611 fm10k_service_event_complete(interface);
612 }
613
614 /**
615 * fm10k_configure_tx_ring - Configure Tx ring after Reset
616 * @interface: board private structure
617 * @ring: structure containing ring specific data
618 *
619 * Configure the Tx descriptor ring after a reset.
620 **/
621 static void fm10k_configure_tx_ring(struct fm10k_intfc *interface,
622 struct fm10k_ring *ring)
623 {
624 struct fm10k_hw *hw = &interface->hw;
625 u64 tdba = ring->dma;
626 u32 size = ring->count * sizeof(struct fm10k_tx_desc);
627 u32 txint = FM10K_INT_MAP_DISABLE;
628 u32 txdctl = BIT(FM10K_TXDCTL_MAX_TIME_SHIFT) | FM10K_TXDCTL_ENABLE;
629 u8 reg_idx = ring->reg_idx;
630
631 /* disable queue to avoid issues while updating state */
632 fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), 0);
633 fm10k_write_flush(hw);
634
635 /* possible poll here to verify ring resources have been cleaned */
636
637 /* set location and size for descriptor ring */
638 fm10k_write_reg(hw, FM10K_TDBAL(reg_idx), tdba & DMA_BIT_MASK(32));
639 fm10k_write_reg(hw, FM10K_TDBAH(reg_idx), tdba >> 32);
640 fm10k_write_reg(hw, FM10K_TDLEN(reg_idx), size);
641
642 /* reset head and tail pointers */
643 fm10k_write_reg(hw, FM10K_TDH(reg_idx), 0);
644 fm10k_write_reg(hw, FM10K_TDT(reg_idx), 0);
645
646 /* store tail pointer */
647 ring->tail = &interface->uc_addr[FM10K_TDT(reg_idx)];
648
649 /* reset ntu and ntc to place SW in sync with hardware */
650 ring->next_to_clean = 0;
651 ring->next_to_use = 0;
652
653 /* Map interrupt */
654 if (ring->q_vector) {
655 txint = ring->q_vector->v_idx + NON_Q_VECTORS(hw);
656 txint |= FM10K_INT_MAP_TIMER0;
657 }
658
659 fm10k_write_reg(hw, FM10K_TXINT(reg_idx), txint);
660
661 /* enable use of FTAG bit in Tx descriptor, register is RO for VF */
662 fm10k_write_reg(hw, FM10K_PFVTCTL(reg_idx),
663 FM10K_PFVTCTL_FTAG_DESC_ENABLE);
664
665 /* Initialize XPS */
666 if (!test_and_set_bit(__FM10K_TX_XPS_INIT_DONE, &ring->state) &&
667 ring->q_vector)
668 netif_set_xps_queue(ring->netdev,
669 &ring->q_vector->affinity_mask,
670 ring->queue_index);
671
672 /* enable queue */
673 fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), txdctl);
674 }
675
676 /**
677 * fm10k_enable_tx_ring - Verify Tx ring is enabled after configuration
678 * @interface: board private structure
679 * @ring: structure containing ring specific data
680 *
681 * Verify the Tx descriptor ring is ready for transmit.
682 **/
683 static void fm10k_enable_tx_ring(struct fm10k_intfc *interface,
684 struct fm10k_ring *ring)
685 {
686 struct fm10k_hw *hw = &interface->hw;
687 int wait_loop = 10;
688 u32 txdctl;
689 u8 reg_idx = ring->reg_idx;
690
691 /* if we are already enabled just exit */
692 if (fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx)) & FM10K_TXDCTL_ENABLE)
693 return;
694
695 /* poll to verify queue is enabled */
696 do {
697 usleep_range(1000, 2000);
698 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx));
699 } while (!(txdctl & FM10K_TXDCTL_ENABLE) && --wait_loop);
700 if (!wait_loop)
701 netif_err(interface, drv, interface->netdev,
702 "Could not enable Tx Queue %d\n", reg_idx);
703 }
704
705 /**
706 * fm10k_configure_tx - Configure Transmit Unit after Reset
707 * @interface: board private structure
708 *
709 * Configure the Tx unit of the MAC after a reset.
710 **/
711 static void fm10k_configure_tx(struct fm10k_intfc *interface)
712 {
713 int i;
714
715 /* Setup the HW Tx Head and Tail descriptor pointers */
716 for (i = 0; i < interface->num_tx_queues; i++)
717 fm10k_configure_tx_ring(interface, interface->tx_ring[i]);
718
719 /* poll here to verify that Tx rings are now enabled */
720 for (i = 0; i < interface->num_tx_queues; i++)
721 fm10k_enable_tx_ring(interface, interface->tx_ring[i]);
722 }
723
724 /**
725 * fm10k_configure_rx_ring - Configure Rx ring after Reset
726 * @interface: board private structure
727 * @ring: structure containing ring specific data
728 *
729 * Configure the Rx descriptor ring after a reset.
730 **/
731 static void fm10k_configure_rx_ring(struct fm10k_intfc *interface,
732 struct fm10k_ring *ring)
733 {
734 u64 rdba = ring->dma;
735 struct fm10k_hw *hw = &interface->hw;
736 u32 size = ring->count * sizeof(union fm10k_rx_desc);
737 u32 rxqctl, rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
738 u32 srrctl = FM10K_SRRCTL_BUFFER_CHAINING_EN;
739 u32 rxint = FM10K_INT_MAP_DISABLE;
740 u8 rx_pause = interface->rx_pause;
741 u8 reg_idx = ring->reg_idx;
742
743 /* disable queue to avoid issues while updating state */
744 rxqctl = fm10k_read_reg(hw, FM10K_RXQCTL(reg_idx));
745 rxqctl &= ~FM10K_RXQCTL_ENABLE;
746 fm10k_write_flush(hw);
747
748 /* possible poll here to verify ring resources have been cleaned */
749
750 /* set location and size for descriptor ring */
751 fm10k_write_reg(hw, FM10K_RDBAL(reg_idx), rdba & DMA_BIT_MASK(32));
752 fm10k_write_reg(hw, FM10K_RDBAH(reg_idx), rdba >> 32);
753 fm10k_write_reg(hw, FM10K_RDLEN(reg_idx), size);
754
755 /* reset head and tail pointers */
756 fm10k_write_reg(hw, FM10K_RDH(reg_idx), 0);
757 fm10k_write_reg(hw, FM10K_RDT(reg_idx), 0);
758
759 /* store tail pointer */
760 ring->tail = &interface->uc_addr[FM10K_RDT(reg_idx)];
761
762 /* reset ntu and ntc to place SW in sync with hardware */
763 ring->next_to_clean = 0;
764 ring->next_to_use = 0;
765 ring->next_to_alloc = 0;
766
767 /* Configure the Rx buffer size for one buff without split */
768 srrctl |= FM10K_RX_BUFSZ >> FM10K_SRRCTL_BSIZEPKT_SHIFT;
769
770 /* Configure the Rx ring to suppress loopback packets */
771 srrctl |= FM10K_SRRCTL_LOOPBACK_SUPPRESS;
772 fm10k_write_reg(hw, FM10K_SRRCTL(reg_idx), srrctl);
773
774 /* Enable drop on empty */
775 #ifdef CONFIG_DCB
776 if (interface->pfc_en)
777 rx_pause = interface->pfc_en;
778 #endif
779 if (!(rx_pause & BIT(ring->qos_pc)))
780 rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY;
781
782 fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl);
783
784 /* assign default VLAN to queue */
785 ring->vid = hw->mac.default_vid;
786
787 /* if we have an active VLAN, disable default VLAN ID */
788 if (test_bit(hw->mac.default_vid, interface->active_vlans))
789 ring->vid |= FM10K_VLAN_CLEAR;
790
791 /* Map interrupt */
792 if (ring->q_vector) {
793 rxint = ring->q_vector->v_idx + NON_Q_VECTORS(hw);
794 rxint |= FM10K_INT_MAP_TIMER1;
795 }
796
797 fm10k_write_reg(hw, FM10K_RXINT(reg_idx), rxint);
798
799 /* enable queue */
800 rxqctl = fm10k_read_reg(hw, FM10K_RXQCTL(reg_idx));
801 rxqctl |= FM10K_RXQCTL_ENABLE;
802 fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), rxqctl);
803
804 /* place buffers on ring for receive data */
805 fm10k_alloc_rx_buffers(ring, fm10k_desc_unused(ring));
806 }
807
808 /**
809 * fm10k_update_rx_drop_en - Configures the drop enable bits for Rx rings
810 * @interface: board private structure
811 *
812 * Configure the drop enable bits for the Rx rings.
813 **/
814 void fm10k_update_rx_drop_en(struct fm10k_intfc *interface)
815 {
816 struct fm10k_hw *hw = &interface->hw;
817 u8 rx_pause = interface->rx_pause;
818 int i;
819
820 #ifdef CONFIG_DCB
821 if (interface->pfc_en)
822 rx_pause = interface->pfc_en;
823
824 #endif
825 for (i = 0; i < interface->num_rx_queues; i++) {
826 struct fm10k_ring *ring = interface->rx_ring[i];
827 u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
828 u8 reg_idx = ring->reg_idx;
829
830 if (!(rx_pause & BIT(ring->qos_pc)))
831 rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY;
832
833 fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl);
834 }
835 }
836
837 /**
838 * fm10k_configure_dglort - Configure Receive DGLORT after reset
839 * @interface: board private structure
840 *
841 * Configure the DGLORT description and RSS tables.
842 **/
843 static void fm10k_configure_dglort(struct fm10k_intfc *interface)
844 {
845 struct fm10k_dglort_cfg dglort = { 0 };
846 struct fm10k_hw *hw = &interface->hw;
847 int i;
848 u32 mrqc;
849
850 /* Fill out hash function seeds */
851 for (i = 0; i < FM10K_RSSRK_SIZE; i++)
852 fm10k_write_reg(hw, FM10K_RSSRK(0, i), interface->rssrk[i]);
853
854 /* Write RETA table to hardware */
855 for (i = 0; i < FM10K_RETA_SIZE; i++)
856 fm10k_write_reg(hw, FM10K_RETA(0, i), interface->reta[i]);
857
858 /* Generate RSS hash based on packet types, TCP/UDP
859 * port numbers and/or IPv4/v6 src and dst addresses
860 */
861 mrqc = FM10K_MRQC_IPV4 |
862 FM10K_MRQC_TCP_IPV4 |
863 FM10K_MRQC_IPV6 |
864 FM10K_MRQC_TCP_IPV6;
865
866 if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV4_UDP)
867 mrqc |= FM10K_MRQC_UDP_IPV4;
868 if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV6_UDP)
869 mrqc |= FM10K_MRQC_UDP_IPV6;
870
871 fm10k_write_reg(hw, FM10K_MRQC(0), mrqc);
872
873 /* configure default DGLORT mapping for RSS/DCB */
874 dglort.inner_rss = 1;
875 dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);
876 dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);
877 hw->mac.ops.configure_dglort_map(hw, &dglort);
878
879 /* assign GLORT per queue for queue mapped testing */
880 if (interface->glort_count > 64) {
881 memset(&dglort, 0, sizeof(dglort));
882 dglort.inner_rss = 1;
883 dglort.glort = interface->glort + 64;
884 dglort.idx = fm10k_dglort_pf_queue;
885 dglort.queue_l = fls(interface->num_rx_queues - 1);
886 hw->mac.ops.configure_dglort_map(hw, &dglort);
887 }
888
889 /* assign glort value for RSS/DCB specific to this interface */
890 memset(&dglort, 0, sizeof(dglort));
891 dglort.inner_rss = 1;
892 dglort.glort = interface->glort;
893 dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);
894 dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);
895 /* configure DGLORT mapping for RSS/DCB */
896 dglort.idx = fm10k_dglort_pf_rss;
897 if (interface->l2_accel)
898 dglort.shared_l = fls(interface->l2_accel->size);
899 hw->mac.ops.configure_dglort_map(hw, &dglort);
900 }
901
902 /**
903 * fm10k_configure_rx - Configure Receive Unit after Reset
904 * @interface: board private structure
905 *
906 * Configure the Rx unit of the MAC after a reset.
907 **/
908 static void fm10k_configure_rx(struct fm10k_intfc *interface)
909 {
910 int i;
911
912 /* Configure SWPRI to PC map */
913 fm10k_configure_swpri_map(interface);
914
915 /* Configure RSS and DGLORT map */
916 fm10k_configure_dglort(interface);
917
918 /* Setup the HW Rx Head and Tail descriptor pointers */
919 for (i = 0; i < interface->num_rx_queues; i++)
920 fm10k_configure_rx_ring(interface, interface->rx_ring[i]);
921
922 /* possible poll here to verify that Rx rings are now enabled */
923 }
924
925 static void fm10k_napi_enable_all(struct fm10k_intfc *interface)
926 {
927 struct fm10k_q_vector *q_vector;
928 int q_idx;
929
930 for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) {
931 q_vector = interface->q_vector[q_idx];
932 napi_enable(&q_vector->napi);
933 }
934 }
935
936 static irqreturn_t fm10k_msix_clean_rings(int __always_unused irq, void *data)
937 {
938 struct fm10k_q_vector *q_vector = data;
939
940 if (q_vector->rx.count || q_vector->tx.count)
941 napi_schedule_irqoff(&q_vector->napi);
942
943 return IRQ_HANDLED;
944 }
945
946 static irqreturn_t fm10k_msix_mbx_vf(int __always_unused irq, void *data)
947 {
948 struct fm10k_intfc *interface = data;
949 struct fm10k_hw *hw = &interface->hw;
950 struct fm10k_mbx_info *mbx = &hw->mbx;
951
952 /* re-enable mailbox interrupt and indicate 20us delay */
953 fm10k_write_reg(hw, FM10K_VFITR(FM10K_MBX_VECTOR),
954 (FM10K_MBX_INT_DELAY >> hw->mac.itr_scale) |
955 FM10K_ITR_ENABLE);
956
957 /* service upstream mailbox */
958 if (fm10k_mbx_trylock(interface)) {
959 mbx->ops.process(hw, mbx);
960 fm10k_mbx_unlock(interface);
961 }
962
963 hw->mac.get_host_state = true;
964 fm10k_service_event_schedule(interface);
965
966 return IRQ_HANDLED;
967 }
968
969 #ifdef CONFIG_NET_POLL_CONTROLLER
970 /**
971 * fm10k_netpoll - A Polling 'interrupt' handler
972 * @netdev: network interface device structure
973 *
974 * This is used by netconsole to send skbs without having to re-enable
975 * interrupts. It's not called while the normal interrupt routine is executing.
976 **/
977 void fm10k_netpoll(struct net_device *netdev)
978 {
979 struct fm10k_intfc *interface = netdev_priv(netdev);
980 int i;
981
982 /* if interface is down do nothing */
983 if (test_bit(__FM10K_DOWN, &interface->state))
984 return;
985
986 for (i = 0; i < interface->num_q_vectors; i++)
987 fm10k_msix_clean_rings(0, interface->q_vector[i]);
988 }
989
990 #endif
991 #define FM10K_ERR_MSG(type) case (type): error = #type; break
992 static void fm10k_handle_fault(struct fm10k_intfc *interface, int type,
993 struct fm10k_fault *fault)
994 {
995 struct pci_dev *pdev = interface->pdev;
996 struct fm10k_hw *hw = &interface->hw;
997 struct fm10k_iov_data *iov_data = interface->iov_data;
998 char *error;
999
1000 switch (type) {
1001 case FM10K_PCA_FAULT:
1002 switch (fault->type) {
1003 default:
1004 error = "Unknown PCA error";
1005 break;
1006 FM10K_ERR_MSG(PCA_NO_FAULT);
1007 FM10K_ERR_MSG(PCA_UNMAPPED_ADDR);
1008 FM10K_ERR_MSG(PCA_BAD_QACCESS_PF);
1009 FM10K_ERR_MSG(PCA_BAD_QACCESS_VF);
1010 FM10K_ERR_MSG(PCA_MALICIOUS_REQ);
1011 FM10K_ERR_MSG(PCA_POISONED_TLP);
1012 FM10K_ERR_MSG(PCA_TLP_ABORT);
1013 }
1014 break;
1015 case FM10K_THI_FAULT:
1016 switch (fault->type) {
1017 default:
1018 error = "Unknown THI error";
1019 break;
1020 FM10K_ERR_MSG(THI_NO_FAULT);
1021 FM10K_ERR_MSG(THI_MAL_DIS_Q_FAULT);
1022 }
1023 break;
1024 case FM10K_FUM_FAULT:
1025 switch (fault->type) {
1026 default:
1027 error = "Unknown FUM error";
1028 break;
1029 FM10K_ERR_MSG(FUM_NO_FAULT);
1030 FM10K_ERR_MSG(FUM_UNMAPPED_ADDR);
1031 FM10K_ERR_MSG(FUM_BAD_VF_QACCESS);
1032 FM10K_ERR_MSG(FUM_ADD_DECODE_ERR);
1033 FM10K_ERR_MSG(FUM_RO_ERROR);
1034 FM10K_ERR_MSG(FUM_QPRC_CRC_ERROR);
1035 FM10K_ERR_MSG(FUM_CSR_TIMEOUT);
1036 FM10K_ERR_MSG(FUM_INVALID_TYPE);
1037 FM10K_ERR_MSG(FUM_INVALID_LENGTH);
1038 FM10K_ERR_MSG(FUM_INVALID_BE);
1039 FM10K_ERR_MSG(FUM_INVALID_ALIGN);
1040 }
1041 break;
1042 default:
1043 error = "Undocumented fault";
1044 break;
1045 }
1046
1047 dev_warn(&pdev->dev,
1048 "%s Address: 0x%llx SpecInfo: 0x%x Func: %02x.%0x\n",
1049 error, fault->address, fault->specinfo,
1050 PCI_SLOT(fault->func), PCI_FUNC(fault->func));
1051
1052 /* For VF faults, clear out the respective LPORT, reset the queue
1053 * resources, and then reconnect to the mailbox. This allows the
1054 * VF in question to resume behavior. For transient faults that are
1055 * the result of non-malicious behavior this will log the fault and
1056 * allow the VF to resume functionality. Obviously for malicious VFs
1057 * they will be able to attempt malicious behavior again. In this
1058 * case, the system administrator will need to step in and manually
1059 * remove or disable the VF in question.
1060 */
1061 if (fault->func && iov_data) {
1062 int vf = fault->func - 1;
1063 struct fm10k_vf_info *vf_info = &iov_data->vf_info[vf];
1064
1065 hw->iov.ops.reset_lport(hw, vf_info);
1066 hw->iov.ops.reset_resources(hw, vf_info);
1067
1068 /* reset_lport disables the VF, so re-enable it */
1069 hw->iov.ops.set_lport(hw, vf_info, vf,
1070 FM10K_VF_FLAG_MULTI_CAPABLE);
1071
1072 /* reset_resources will disconnect from the mbx */
1073 vf_info->mbx.ops.connect(hw, &vf_info->mbx);
1074 }
1075 }
1076
1077 static void fm10k_report_fault(struct fm10k_intfc *interface, u32 eicr)
1078 {
1079 struct fm10k_hw *hw = &interface->hw;
1080 struct fm10k_fault fault = { 0 };
1081 int type, err;
1082
1083 for (eicr &= FM10K_EICR_FAULT_MASK, type = FM10K_PCA_FAULT;
1084 eicr;
1085 eicr >>= 1, type += FM10K_FAULT_SIZE) {
1086 /* only check if there is an error reported */
1087 if (!(eicr & 0x1))
1088 continue;
1089
1090 /* retrieve fault info */
1091 err = hw->mac.ops.get_fault(hw, type, &fault);
1092 if (err) {
1093 dev_err(&interface->pdev->dev,
1094 "error reading fault\n");
1095 continue;
1096 }
1097
1098 fm10k_handle_fault(interface, type, &fault);
1099 }
1100 }
1101
1102 static void fm10k_reset_drop_on_empty(struct fm10k_intfc *interface, u32 eicr)
1103 {
1104 struct fm10k_hw *hw = &interface->hw;
1105 const u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
1106 u32 maxholdq;
1107 int q;
1108
1109 if (!(eicr & FM10K_EICR_MAXHOLDTIME))
1110 return;
1111
1112 maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(7));
1113 if (maxholdq)
1114 fm10k_write_reg(hw, FM10K_MAXHOLDQ(7), maxholdq);
1115 for (q = 255;;) {
1116 if (maxholdq & BIT(31)) {
1117 if (q < FM10K_MAX_QUEUES_PF) {
1118 interface->rx_overrun_pf++;
1119 fm10k_write_reg(hw, FM10K_RXDCTL(q), rxdctl);
1120 } else {
1121 interface->rx_overrun_vf++;
1122 }
1123 }
1124
1125 maxholdq *= 2;
1126 if (!maxholdq)
1127 q &= ~(32 - 1);
1128
1129 if (!q)
1130 break;
1131
1132 if (q-- % 32)
1133 continue;
1134
1135 maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(q / 32));
1136 if (maxholdq)
1137 fm10k_write_reg(hw, FM10K_MAXHOLDQ(q / 32), maxholdq);
1138 }
1139 }
1140
1141 static irqreturn_t fm10k_msix_mbx_pf(int __always_unused irq, void *data)
1142 {
1143 struct fm10k_intfc *interface = data;
1144 struct fm10k_hw *hw = &interface->hw;
1145 struct fm10k_mbx_info *mbx = &hw->mbx;
1146 u32 eicr;
1147
1148 /* unmask any set bits related to this interrupt */
1149 eicr = fm10k_read_reg(hw, FM10K_EICR);
1150 fm10k_write_reg(hw, FM10K_EICR, eicr & (FM10K_EICR_MAILBOX |
1151 FM10K_EICR_SWITCHREADY |
1152 FM10K_EICR_SWITCHNOTREADY));
1153
1154 /* report any faults found to the message log */
1155 fm10k_report_fault(interface, eicr);
1156
1157 /* reset any queues disabled due to receiver overrun */
1158 fm10k_reset_drop_on_empty(interface, eicr);
1159
1160 /* service mailboxes */
1161 if (fm10k_mbx_trylock(interface)) {
1162 mbx->ops.process(hw, mbx);
1163 /* handle VFLRE events */
1164 fm10k_iov_event(interface);
1165 fm10k_mbx_unlock(interface);
1166 }
1167
1168 /* if switch toggled state we should reset GLORTs */
1169 if (eicr & FM10K_EICR_SWITCHNOTREADY) {
1170 /* force link down for at least 4 seconds */
1171 interface->link_down_event = jiffies + (4 * HZ);
1172 set_bit(__FM10K_LINK_DOWN, &interface->state);
1173
1174 /* reset dglort_map back to no config */
1175 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
1176 }
1177
1178 /* we should validate host state after interrupt event */
1179 hw->mac.get_host_state = true;
1180
1181 /* validate host state, and handle VF mailboxes in the service task */
1182 fm10k_service_event_schedule(interface);
1183
1184 /* re-enable mailbox interrupt and indicate 20us delay */
1185 fm10k_write_reg(hw, FM10K_ITR(FM10K_MBX_VECTOR),
1186 (FM10K_MBX_INT_DELAY >> hw->mac.itr_scale) |
1187 FM10K_ITR_ENABLE);
1188
1189 return IRQ_HANDLED;
1190 }
1191
1192 void fm10k_mbx_free_irq(struct fm10k_intfc *interface)
1193 {
1194 struct fm10k_hw *hw = &interface->hw;
1195 struct msix_entry *entry;
1196 int itr_reg;
1197
1198 /* no mailbox IRQ to free if MSI-X is not enabled */
1199 if (!interface->msix_entries)
1200 return;
1201
1202 entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1203
1204 /* disconnect the mailbox */
1205 hw->mbx.ops.disconnect(hw, &hw->mbx);
1206
1207 /* disable Mailbox cause */
1208 if (hw->mac.type == fm10k_mac_pf) {
1209 fm10k_write_reg(hw, FM10K_EIMR,
1210 FM10K_EIMR_DISABLE(PCA_FAULT) |
1211 FM10K_EIMR_DISABLE(FUM_FAULT) |
1212 FM10K_EIMR_DISABLE(MAILBOX) |
1213 FM10K_EIMR_DISABLE(SWITCHREADY) |
1214 FM10K_EIMR_DISABLE(SWITCHNOTREADY) |
1215 FM10K_EIMR_DISABLE(SRAMERROR) |
1216 FM10K_EIMR_DISABLE(VFLR) |
1217 FM10K_EIMR_DISABLE(MAXHOLDTIME));
1218 itr_reg = FM10K_ITR(FM10K_MBX_VECTOR);
1219 } else {
1220 itr_reg = FM10K_VFITR(FM10K_MBX_VECTOR);
1221 }
1222
1223 fm10k_write_reg(hw, itr_reg, FM10K_ITR_MASK_SET);
1224
1225 free_irq(entry->vector, interface);
1226 }
1227
1228 static s32 fm10k_mbx_mac_addr(struct fm10k_hw *hw, u32 **results,
1229 struct fm10k_mbx_info *mbx)
1230 {
1231 bool vlan_override = hw->mac.vlan_override;
1232 u16 default_vid = hw->mac.default_vid;
1233 struct fm10k_intfc *interface;
1234 s32 err;
1235
1236 err = fm10k_msg_mac_vlan_vf(hw, results, mbx);
1237 if (err)
1238 return err;
1239
1240 interface = container_of(hw, struct fm10k_intfc, hw);
1241
1242 /* MAC was changed so we need reset */
1243 if (is_valid_ether_addr(hw->mac.perm_addr) &&
1244 !ether_addr_equal(hw->mac.perm_addr, hw->mac.addr))
1245 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
1246
1247 /* VLAN override was changed, or default VLAN changed */
1248 if ((vlan_override != hw->mac.vlan_override) ||
1249 (default_vid != hw->mac.default_vid))
1250 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
1251
1252 return 0;
1253 }
1254
1255 /* generic error handler for mailbox issues */
1256 static s32 fm10k_mbx_error(struct fm10k_hw *hw, u32 **results,
1257 struct fm10k_mbx_info __always_unused *mbx)
1258 {
1259 struct fm10k_intfc *interface;
1260 struct pci_dev *pdev;
1261
1262 interface = container_of(hw, struct fm10k_intfc, hw);
1263 pdev = interface->pdev;
1264
1265 dev_err(&pdev->dev, "Unknown message ID %u\n",
1266 **results & FM10K_TLV_ID_MASK);
1267
1268 return 0;
1269 }
1270
1271 static const struct fm10k_msg_data vf_mbx_data[] = {
1272 FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
1273 FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_mbx_mac_addr),
1274 FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
1275 FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error),
1276 };
1277
1278 static int fm10k_mbx_request_irq_vf(struct fm10k_intfc *interface)
1279 {
1280 struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1281 struct net_device *dev = interface->netdev;
1282 struct fm10k_hw *hw = &interface->hw;
1283 int err;
1284
1285 /* Use timer0 for interrupt moderation on the mailbox */
1286 u32 itr = entry->entry | FM10K_INT_MAP_TIMER0;
1287
1288 /* register mailbox handlers */
1289 err = hw->mbx.ops.register_handlers(&hw->mbx, vf_mbx_data);
1290 if (err)
1291 return err;
1292
1293 /* request the IRQ */
1294 err = request_irq(entry->vector, fm10k_msix_mbx_vf, 0,
1295 dev->name, interface);
1296 if (err) {
1297 netif_err(interface, probe, dev,
1298 "request_irq for msix_mbx failed: %d\n", err);
1299 return err;
1300 }
1301
1302 /* map all of the interrupt sources */
1303 fm10k_write_reg(hw, FM10K_VFINT_MAP, itr);
1304
1305 /* enable interrupt */
1306 fm10k_write_reg(hw, FM10K_VFITR(entry->entry), FM10K_ITR_ENABLE);
1307
1308 return 0;
1309 }
1310
1311 static s32 fm10k_lport_map(struct fm10k_hw *hw, u32 **results,
1312 struct fm10k_mbx_info *mbx)
1313 {
1314 struct fm10k_intfc *interface;
1315 u32 dglort_map = hw->mac.dglort_map;
1316 s32 err;
1317
1318 interface = container_of(hw, struct fm10k_intfc, hw);
1319
1320 err = fm10k_msg_err_pf(hw, results, mbx);
1321 if (!err && hw->swapi.status) {
1322 /* force link down for a reasonable delay */
1323 interface->link_down_event = jiffies + (2 * HZ);
1324 set_bit(__FM10K_LINK_DOWN, &interface->state);
1325
1326 /* reset dglort_map back to no config */
1327 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
1328
1329 fm10k_service_event_schedule(interface);
1330
1331 /* prevent overloading kernel message buffer */
1332 if (interface->lport_map_failed)
1333 return 0;
1334
1335 interface->lport_map_failed = true;
1336
1337 if (hw->swapi.status == FM10K_MSG_ERR_PEP_NOT_SCHEDULED)
1338 dev_warn(&interface->pdev->dev,
1339 "cannot obtain link because the host interface is configured for a PCIe host interface bandwidth of zero\n");
1340 dev_warn(&interface->pdev->dev,
1341 "request logical port map failed: %d\n",
1342 hw->swapi.status);
1343
1344 return 0;
1345 }
1346
1347 err = fm10k_msg_lport_map_pf(hw, results, mbx);
1348 if (err)
1349 return err;
1350
1351 interface->lport_map_failed = false;
1352
1353 /* we need to reset if port count was just updated */
1354 if (dglort_map != hw->mac.dglort_map)
1355 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
1356
1357 return 0;
1358 }
1359
1360 static s32 fm10k_update_pvid(struct fm10k_hw *hw, u32 **results,
1361 struct fm10k_mbx_info __always_unused *mbx)
1362 {
1363 struct fm10k_intfc *interface;
1364 u16 glort, pvid;
1365 u32 pvid_update;
1366 s32 err;
1367
1368 err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID],
1369 &pvid_update);
1370 if (err)
1371 return err;
1372
1373 /* extract values from the pvid update */
1374 glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT);
1375 pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID);
1376
1377 /* if glort is not valid return error */
1378 if (!fm10k_glort_valid_pf(hw, glort))
1379 return FM10K_ERR_PARAM;
1380
1381 /* verify VLAN ID is valid */
1382 if (pvid >= FM10K_VLAN_TABLE_VID_MAX)
1383 return FM10K_ERR_PARAM;
1384
1385 interface = container_of(hw, struct fm10k_intfc, hw);
1386
1387 /* check to see if this belongs to one of the VFs */
1388 err = fm10k_iov_update_pvid(interface, glort, pvid);
1389 if (!err)
1390 return 0;
1391
1392 /* we need to reset if default VLAN was just updated */
1393 if (pvid != hw->mac.default_vid)
1394 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
1395
1396 hw->mac.default_vid = pvid;
1397
1398 return 0;
1399 }
1400
1401 static const struct fm10k_msg_data pf_mbx_data[] = {
1402 FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
1403 FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
1404 FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_lport_map),
1405 FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf),
1406 FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf),
1407 FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_update_pvid),
1408 FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error),
1409 };
1410
1411 static int fm10k_mbx_request_irq_pf(struct fm10k_intfc *interface)
1412 {
1413 struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1414 struct net_device *dev = interface->netdev;
1415 struct fm10k_hw *hw = &interface->hw;
1416 int err;
1417
1418 /* Use timer0 for interrupt moderation on the mailbox */
1419 u32 mbx_itr = entry->entry | FM10K_INT_MAP_TIMER0;
1420 u32 other_itr = entry->entry | FM10K_INT_MAP_IMMEDIATE;
1421
1422 /* register mailbox handlers */
1423 err = hw->mbx.ops.register_handlers(&hw->mbx, pf_mbx_data);
1424 if (err)
1425 return err;
1426
1427 /* request the IRQ */
1428 err = request_irq(entry->vector, fm10k_msix_mbx_pf, 0,
1429 dev->name, interface);
1430 if (err) {
1431 netif_err(interface, probe, dev,
1432 "request_irq for msix_mbx failed: %d\n", err);
1433 return err;
1434 }
1435
1436 /* Enable interrupts w/ no moderation for "other" interrupts */
1437 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_pcie_fault), other_itr);
1438 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_switch_up_down), other_itr);
1439 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_sram), other_itr);
1440 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_max_hold_time), other_itr);
1441 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_vflr), other_itr);
1442
1443 /* Enable interrupts w/ moderation for mailbox */
1444 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_mailbox), mbx_itr);
1445
1446 /* Enable individual interrupt causes */
1447 fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) |
1448 FM10K_EIMR_ENABLE(FUM_FAULT) |
1449 FM10K_EIMR_ENABLE(MAILBOX) |
1450 FM10K_EIMR_ENABLE(SWITCHREADY) |
1451 FM10K_EIMR_ENABLE(SWITCHNOTREADY) |
1452 FM10K_EIMR_ENABLE(SRAMERROR) |
1453 FM10K_EIMR_ENABLE(VFLR) |
1454 FM10K_EIMR_ENABLE(MAXHOLDTIME));
1455
1456 /* enable interrupt */
1457 fm10k_write_reg(hw, FM10K_ITR(entry->entry), FM10K_ITR_ENABLE);
1458
1459 return 0;
1460 }
1461
1462 int fm10k_mbx_request_irq(struct fm10k_intfc *interface)
1463 {
1464 struct fm10k_hw *hw = &interface->hw;
1465 int err;
1466
1467 /* enable Mailbox cause */
1468 if (hw->mac.type == fm10k_mac_pf)
1469 err = fm10k_mbx_request_irq_pf(interface);
1470 else
1471 err = fm10k_mbx_request_irq_vf(interface);
1472 if (err)
1473 return err;
1474
1475 /* connect mailbox */
1476 err = hw->mbx.ops.connect(hw, &hw->mbx);
1477
1478 /* if the mailbox failed to connect, then free IRQ */
1479 if (err)
1480 fm10k_mbx_free_irq(interface);
1481
1482 return err;
1483 }
1484
1485 /**
1486 * fm10k_qv_free_irq - release interrupts associated with queue vectors
1487 * @interface: board private structure
1488 *
1489 * Release all interrupts associated with this interface
1490 **/
1491 void fm10k_qv_free_irq(struct fm10k_intfc *interface)
1492 {
1493 int vector = interface->num_q_vectors;
1494 struct fm10k_hw *hw = &interface->hw;
1495 struct msix_entry *entry;
1496
1497 entry = &interface->msix_entries[NON_Q_VECTORS(hw) + vector];
1498
1499 while (vector) {
1500 struct fm10k_q_vector *q_vector;
1501
1502 vector--;
1503 entry--;
1504 q_vector = interface->q_vector[vector];
1505
1506 if (!q_vector->tx.count && !q_vector->rx.count)
1507 continue;
1508
1509 /* clear the affinity_mask in the IRQ descriptor */
1510 irq_set_affinity_hint(entry->vector, NULL);
1511
1512 /* disable interrupts */
1513 writel(FM10K_ITR_MASK_SET, q_vector->itr);
1514
1515 free_irq(entry->vector, q_vector);
1516 }
1517 }
1518
1519 /**
1520 * fm10k_qv_request_irq - initialize interrupts for queue vectors
1521 * @interface: board private structure
1522 *
1523 * Attempts to configure interrupts using the best available
1524 * capabilities of the hardware and kernel.
1525 **/
1526 int fm10k_qv_request_irq(struct fm10k_intfc *interface)
1527 {
1528 struct net_device *dev = interface->netdev;
1529 struct fm10k_hw *hw = &interface->hw;
1530 struct msix_entry *entry;
1531 int ri = 0, ti = 0;
1532 int vector, err;
1533
1534 entry = &interface->msix_entries[NON_Q_VECTORS(hw)];
1535
1536 for (vector = 0; vector < interface->num_q_vectors; vector++) {
1537 struct fm10k_q_vector *q_vector = interface->q_vector[vector];
1538
1539 /* name the vector */
1540 if (q_vector->tx.count && q_vector->rx.count) {
1541 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
1542 "%s-TxRx-%d", dev->name, ri++);
1543 ti++;
1544 } else if (q_vector->rx.count) {
1545 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
1546 "%s-rx-%d", dev->name, ri++);
1547 } else if (q_vector->tx.count) {
1548 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
1549 "%s-tx-%d", dev->name, ti++);
1550 } else {
1551 /* skip this unused q_vector */
1552 continue;
1553 }
1554
1555 /* Assign ITR register to q_vector */
1556 q_vector->itr = (hw->mac.type == fm10k_mac_pf) ?
1557 &interface->uc_addr[FM10K_ITR(entry->entry)] :
1558 &interface->uc_addr[FM10K_VFITR(entry->entry)];
1559
1560 /* request the IRQ */
1561 err = request_irq(entry->vector, &fm10k_msix_clean_rings, 0,
1562 q_vector->name, q_vector);
1563 if (err) {
1564 netif_err(interface, probe, dev,
1565 "request_irq failed for MSIX interrupt Error: %d\n",
1566 err);
1567 goto err_out;
1568 }
1569
1570 /* assign the mask for this irq */
1571 irq_set_affinity_hint(entry->vector, &q_vector->affinity_mask);
1572
1573 /* Enable q_vector */
1574 writel(FM10K_ITR_ENABLE, q_vector->itr);
1575
1576 entry++;
1577 }
1578
1579 return 0;
1580
1581 err_out:
1582 /* wind through the ring freeing all entries and vectors */
1583 while (vector) {
1584 struct fm10k_q_vector *q_vector;
1585
1586 entry--;
1587 vector--;
1588 q_vector = interface->q_vector[vector];
1589
1590 if (!q_vector->tx.count && !q_vector->rx.count)
1591 continue;
1592
1593 /* clear the affinity_mask in the IRQ descriptor */
1594 irq_set_affinity_hint(entry->vector, NULL);
1595
1596 /* disable interrupts */
1597 writel(FM10K_ITR_MASK_SET, q_vector->itr);
1598
1599 free_irq(entry->vector, q_vector);
1600 }
1601
1602 return err;
1603 }
1604
1605 void fm10k_up(struct fm10k_intfc *interface)
1606 {
1607 struct fm10k_hw *hw = &interface->hw;
1608
1609 /* Enable Tx/Rx DMA */
1610 hw->mac.ops.start_hw(hw);
1611
1612 /* configure Tx descriptor rings */
1613 fm10k_configure_tx(interface);
1614
1615 /* configure Rx descriptor rings */
1616 fm10k_configure_rx(interface);
1617
1618 /* configure interrupts */
1619 hw->mac.ops.update_int_moderator(hw);
1620
1621 /* enable statistics capture again */
1622 clear_bit(__FM10K_UPDATING_STATS, &interface->state);
1623
1624 /* clear down bit to indicate we are ready to go */
1625 clear_bit(__FM10K_DOWN, &interface->state);
1626
1627 /* enable polling cleanups */
1628 fm10k_napi_enable_all(interface);
1629
1630 /* re-establish Rx filters */
1631 fm10k_restore_rx_state(interface);
1632
1633 /* enable transmits */
1634 netif_tx_start_all_queues(interface->netdev);
1635
1636 /* kick off the service timer now */
1637 hw->mac.get_host_state = true;
1638 mod_timer(&interface->service_timer, jiffies);
1639 }
1640
1641 static void fm10k_napi_disable_all(struct fm10k_intfc *interface)
1642 {
1643 struct fm10k_q_vector *q_vector;
1644 int q_idx;
1645
1646 for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) {
1647 q_vector = interface->q_vector[q_idx];
1648 napi_disable(&q_vector->napi);
1649 }
1650 }
1651
1652 void fm10k_down(struct fm10k_intfc *interface)
1653 {
1654 struct net_device *netdev = interface->netdev;
1655 struct fm10k_hw *hw = &interface->hw;
1656 int err, i = 0, count = 0;
1657
1658 /* signal that we are down to the interrupt handler and service task */
1659 if (test_and_set_bit(__FM10K_DOWN, &interface->state))
1660 return;
1661
1662 /* call carrier off first to avoid false dev_watchdog timeouts */
1663 netif_carrier_off(netdev);
1664
1665 /* disable transmits */
1666 netif_tx_stop_all_queues(netdev);
1667 netif_tx_disable(netdev);
1668
1669 /* reset Rx filters */
1670 fm10k_reset_rx_state(interface);
1671
1672 /* disable polling routines */
1673 fm10k_napi_disable_all(interface);
1674
1675 /* capture stats one last time before stopping interface */
1676 fm10k_update_stats(interface);
1677
1678 /* prevent updating statistics while we're down */
1679 while (test_and_set_bit(__FM10K_UPDATING_STATS, &interface->state))
1680 usleep_range(1000, 2000);
1681
1682 /* skip waiting for TX DMA if we lost PCIe link */
1683 if (FM10K_REMOVED(hw->hw_addr))
1684 goto skip_tx_dma_drain;
1685
1686 /* In some rare circumstances it can take a while for Tx queues to
1687 * quiesce and be fully disabled. Attempt to .stop_hw() first, and
1688 * then if we get ERR_REQUESTS_PENDING, go ahead and wait in a loop
1689 * until the Tx queues have emptied, or until a number of retries. If
1690 * we fail to clear within the retry loop, we will issue a warning
1691 * indicating that Tx DMA is probably hung. Note this means we call
1692 * .stop_hw() twice but this shouldn't cause any problems.
1693 */
1694 err = hw->mac.ops.stop_hw(hw);
1695 if (err != FM10K_ERR_REQUESTS_PENDING)
1696 goto skip_tx_dma_drain;
1697
1698 #define TX_DMA_DRAIN_RETRIES 25
1699 for (count = 0; count < TX_DMA_DRAIN_RETRIES; count++) {
1700 usleep_range(10000, 20000);
1701
1702 /* start checking at the last ring to have pending Tx */
1703 for (; i < interface->num_tx_queues; i++)
1704 if (fm10k_get_tx_pending(interface->tx_ring[i], false))
1705 break;
1706
1707 /* if all the queues are drained, we can break now */
1708 if (i == interface->num_tx_queues)
1709 break;
1710 }
1711
1712 if (count >= TX_DMA_DRAIN_RETRIES)
1713 dev_err(&interface->pdev->dev,
1714 "Tx queues failed to drain after %d tries. Tx DMA is probably hung.\n",
1715 count);
1716 skip_tx_dma_drain:
1717 /* Disable DMA engine for Tx/Rx */
1718 err = hw->mac.ops.stop_hw(hw);
1719 if (err == FM10K_ERR_REQUESTS_PENDING)
1720 dev_err(&interface->pdev->dev,
1721 "due to pending requests hw was not shut down gracefully\n");
1722 else if (err)
1723 dev_err(&interface->pdev->dev, "stop_hw failed: %d\n", err);
1724
1725 /* free any buffers still on the rings */
1726 fm10k_clean_all_tx_rings(interface);
1727 fm10k_clean_all_rx_rings(interface);
1728 }
1729
1730 /**
1731 * fm10k_sw_init - Initialize general software structures
1732 * @interface: host interface private structure to initialize
1733 *
1734 * fm10k_sw_init initializes the interface private data structure.
1735 * Fields are initialized based on PCI device information and
1736 * OS network device settings (MTU size).
1737 **/
1738 static int fm10k_sw_init(struct fm10k_intfc *interface,
1739 const struct pci_device_id *ent)
1740 {
1741 const struct fm10k_info *fi = fm10k_info_tbl[ent->driver_data];
1742 struct fm10k_hw *hw = &interface->hw;
1743 struct pci_dev *pdev = interface->pdev;
1744 struct net_device *netdev = interface->netdev;
1745 u32 rss_key[FM10K_RSSRK_SIZE];
1746 unsigned int rss;
1747 int err;
1748
1749 /* initialize back pointer */
1750 hw->back = interface;
1751 hw->hw_addr = interface->uc_addr;
1752
1753 /* PCI config space info */
1754 hw->vendor_id = pdev->vendor;
1755 hw->device_id = pdev->device;
1756 hw->revision_id = pdev->revision;
1757 hw->subsystem_vendor_id = pdev->subsystem_vendor;
1758 hw->subsystem_device_id = pdev->subsystem_device;
1759
1760 /* Setup hw api */
1761 memcpy(&hw->mac.ops, fi->mac_ops, sizeof(hw->mac.ops));
1762 hw->mac.type = fi->mac;
1763
1764 /* Setup IOV handlers */
1765 if (fi->iov_ops)
1766 memcpy(&hw->iov.ops, fi->iov_ops, sizeof(hw->iov.ops));
1767
1768 /* Set common capability flags and settings */
1769 rss = min_t(int, FM10K_MAX_RSS_INDICES, num_online_cpus());
1770 interface->ring_feature[RING_F_RSS].limit = rss;
1771 fi->get_invariants(hw);
1772
1773 /* pick up the PCIe bus settings for reporting later */
1774 if (hw->mac.ops.get_bus_info)
1775 hw->mac.ops.get_bus_info(hw);
1776
1777 /* limit the usable DMA range */
1778 if (hw->mac.ops.set_dma_mask)
1779 hw->mac.ops.set_dma_mask(hw, dma_get_mask(&pdev->dev));
1780
1781 /* update netdev with DMA restrictions */
1782 if (dma_get_mask(&pdev->dev) > DMA_BIT_MASK(32)) {
1783 netdev->features |= NETIF_F_HIGHDMA;
1784 netdev->vlan_features |= NETIF_F_HIGHDMA;
1785 }
1786
1787 /* delay any future reset requests */
1788 interface->last_reset = jiffies + (10 * HZ);
1789
1790 /* reset and initialize the hardware so it is in a known state */
1791 err = hw->mac.ops.reset_hw(hw);
1792 if (err) {
1793 dev_err(&pdev->dev, "reset_hw failed: %d\n", err);
1794 return err;
1795 }
1796
1797 err = hw->mac.ops.init_hw(hw);
1798 if (err) {
1799 dev_err(&pdev->dev, "init_hw failed: %d\n", err);
1800 return err;
1801 }
1802
1803 /* initialize hardware statistics */
1804 hw->mac.ops.update_hw_stats(hw, &interface->stats);
1805
1806 /* Set upper limit on IOV VFs that can be allocated */
1807 pci_sriov_set_totalvfs(pdev, hw->iov.total_vfs);
1808
1809 /* Start with random Ethernet address */
1810 eth_random_addr(hw->mac.addr);
1811
1812 /* Initialize MAC address from hardware */
1813 err = hw->mac.ops.read_mac_addr(hw);
1814 if (err) {
1815 dev_warn(&pdev->dev,
1816 "Failed to obtain MAC address defaulting to random\n");
1817 /* tag address assignment as random */
1818 netdev->addr_assign_type |= NET_ADDR_RANDOM;
1819 }
1820
1821 ether_addr_copy(netdev->dev_addr, hw->mac.addr);
1822 ether_addr_copy(netdev->perm_addr, hw->mac.addr);
1823
1824 if (!is_valid_ether_addr(netdev->perm_addr)) {
1825 dev_err(&pdev->dev, "Invalid MAC Address\n");
1826 return -EIO;
1827 }
1828
1829 /* initialize DCBNL interface */
1830 fm10k_dcbnl_set_ops(netdev);
1831
1832 /* set default ring sizes */
1833 interface->tx_ring_count = FM10K_DEFAULT_TXD;
1834 interface->rx_ring_count = FM10K_DEFAULT_RXD;
1835
1836 /* set default interrupt moderation */
1837 interface->tx_itr = FM10K_TX_ITR_DEFAULT;
1838 interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_RX_ITR_DEFAULT;
1839
1840 /* initialize udp port lists */
1841 INIT_LIST_HEAD(&interface->vxlan_port);
1842 INIT_LIST_HEAD(&interface->geneve_port);
1843
1844 netdev_rss_key_fill(rss_key, sizeof(rss_key));
1845 memcpy(interface->rssrk, rss_key, sizeof(rss_key));
1846
1847 /* Start off interface as being down */
1848 set_bit(__FM10K_DOWN, &interface->state);
1849 set_bit(__FM10K_UPDATING_STATS, &interface->state);
1850
1851 return 0;
1852 }
1853
1854 static void fm10k_slot_warn(struct fm10k_intfc *interface)
1855 {
1856 enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
1857 enum pci_bus_speed speed = PCI_SPEED_UNKNOWN;
1858 struct fm10k_hw *hw = &interface->hw;
1859 int max_gts = 0, expected_gts = 0;
1860
1861 if (pcie_get_minimum_link(interface->pdev, &speed, &width) ||
1862 speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) {
1863 dev_warn(&interface->pdev->dev,
1864 "Unable to determine PCI Express bandwidth.\n");
1865 return;
1866 }
1867
1868 switch (speed) {
1869 case PCIE_SPEED_2_5GT:
1870 /* 8b/10b encoding reduces max throughput by 20% */
1871 max_gts = 2 * width;
1872 break;
1873 case PCIE_SPEED_5_0GT:
1874 /* 8b/10b encoding reduces max throughput by 20% */
1875 max_gts = 4 * width;
1876 break;
1877 case PCIE_SPEED_8_0GT:
1878 /* 128b/130b encoding has less than 2% impact on throughput */
1879 max_gts = 8 * width;
1880 break;
1881 default:
1882 dev_warn(&interface->pdev->dev,
1883 "Unable to determine PCI Express bandwidth.\n");
1884 return;
1885 }
1886
1887 dev_info(&interface->pdev->dev,
1888 "PCI Express bandwidth of %dGT/s available\n",
1889 max_gts);
1890 dev_info(&interface->pdev->dev,
1891 "(Speed:%s, Width: x%d, Encoding Loss:%s, Payload:%s)\n",
1892 (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" :
1893 speed == PCIE_SPEED_5_0GT ? "5.0GT/s" :
1894 speed == PCIE_SPEED_2_5GT ? "2.5GT/s" :
1895 "Unknown"),
1896 hw->bus.width,
1897 (speed == PCIE_SPEED_2_5GT ? "20%" :
1898 speed == PCIE_SPEED_5_0GT ? "20%" :
1899 speed == PCIE_SPEED_8_0GT ? "<2%" :
1900 "Unknown"),
1901 (hw->bus.payload == fm10k_bus_payload_128 ? "128B" :
1902 hw->bus.payload == fm10k_bus_payload_256 ? "256B" :
1903 hw->bus.payload == fm10k_bus_payload_512 ? "512B" :
1904 "Unknown"));
1905
1906 switch (hw->bus_caps.speed) {
1907 case fm10k_bus_speed_2500:
1908 /* 8b/10b encoding reduces max throughput by 20% */
1909 expected_gts = 2 * hw->bus_caps.width;
1910 break;
1911 case fm10k_bus_speed_5000:
1912 /* 8b/10b encoding reduces max throughput by 20% */
1913 expected_gts = 4 * hw->bus_caps.width;
1914 break;
1915 case fm10k_bus_speed_8000:
1916 /* 128b/130b encoding has less than 2% impact on throughput */
1917 expected_gts = 8 * hw->bus_caps.width;
1918 break;
1919 default:
1920 dev_warn(&interface->pdev->dev,
1921 "Unable to determine expected PCI Express bandwidth.\n");
1922 return;
1923 }
1924
1925 if (max_gts >= expected_gts)
1926 return;
1927
1928 dev_warn(&interface->pdev->dev,
1929 "This device requires %dGT/s of bandwidth for optimal performance.\n",
1930 expected_gts);
1931 dev_warn(&interface->pdev->dev,
1932 "A %sslot with x%d lanes is suggested.\n",
1933 (hw->bus_caps.speed == fm10k_bus_speed_2500 ? "2.5GT/s " :
1934 hw->bus_caps.speed == fm10k_bus_speed_5000 ? "5.0GT/s " :
1935 hw->bus_caps.speed == fm10k_bus_speed_8000 ? "8.0GT/s " : ""),
1936 hw->bus_caps.width);
1937 }
1938
1939 /**
1940 * fm10k_probe - Device Initialization Routine
1941 * @pdev: PCI device information struct
1942 * @ent: entry in fm10k_pci_tbl
1943 *
1944 * Returns 0 on success, negative on failure
1945 *
1946 * fm10k_probe initializes an interface identified by a pci_dev structure.
1947 * The OS initialization, configuring of the interface private structure,
1948 * and a hardware reset occur.
1949 **/
1950 static int fm10k_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1951 {
1952 struct net_device *netdev;
1953 struct fm10k_intfc *interface;
1954 int err;
1955
1956 if (pdev->error_state != pci_channel_io_normal) {
1957 dev_err(&pdev->dev,
1958 "PCI device still in an error state. Unable to load...\n");
1959 return -EIO;
1960 }
1961
1962 err = pci_enable_device_mem(pdev);
1963 if (err) {
1964 dev_err(&pdev->dev,
1965 "PCI enable device failed: %d\n", err);
1966 return err;
1967 }
1968
1969 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48));
1970 if (err)
1971 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
1972 if (err) {
1973 dev_err(&pdev->dev,
1974 "DMA configuration failed: %d\n", err);
1975 goto err_dma;
1976 }
1977
1978 err = pci_request_mem_regions(pdev, fm10k_driver_name);
1979 if (err) {
1980 dev_err(&pdev->dev,
1981 "pci_request_selected_regions failed: %d\n", err);
1982 goto err_pci_reg;
1983 }
1984
1985 pci_enable_pcie_error_reporting(pdev);
1986
1987 pci_set_master(pdev);
1988 pci_save_state(pdev);
1989
1990 netdev = fm10k_alloc_netdev(fm10k_info_tbl[ent->driver_data]);
1991 if (!netdev) {
1992 err = -ENOMEM;
1993 goto err_alloc_netdev;
1994 }
1995
1996 SET_NETDEV_DEV(netdev, &pdev->dev);
1997
1998 interface = netdev_priv(netdev);
1999 pci_set_drvdata(pdev, interface);
2000
2001 interface->netdev = netdev;
2002 interface->pdev = pdev;
2003
2004 interface->uc_addr = ioremap(pci_resource_start(pdev, 0),
2005 FM10K_UC_ADDR_SIZE);
2006 if (!interface->uc_addr) {
2007 err = -EIO;
2008 goto err_ioremap;
2009 }
2010
2011 err = fm10k_sw_init(interface, ent);
2012 if (err)
2013 goto err_sw_init;
2014
2015 /* enable debugfs support */
2016 fm10k_dbg_intfc_init(interface);
2017
2018 err = fm10k_init_queueing_scheme(interface);
2019 if (err)
2020 goto err_sw_init;
2021
2022 /* the mbx interrupt might attempt to schedule the service task, so we
2023 * must ensure it is disabled since we haven't yet requested the timer
2024 * or work item.
2025 */
2026 set_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2027
2028 err = fm10k_mbx_request_irq(interface);
2029 if (err)
2030 goto err_mbx_interrupt;
2031
2032 /* final check of hardware state before registering the interface */
2033 err = fm10k_hw_ready(interface);
2034 if (err)
2035 goto err_register;
2036
2037 err = register_netdev(netdev);
2038 if (err)
2039 goto err_register;
2040
2041 /* carrier off reporting is important to ethtool even BEFORE open */
2042 netif_carrier_off(netdev);
2043
2044 /* stop all the transmit queues from transmitting until link is up */
2045 netif_tx_stop_all_queues(netdev);
2046
2047 /* Initialize service timer and service task late in order to avoid
2048 * cleanup issues.
2049 */
2050 setup_timer(&interface->service_timer, &fm10k_service_timer,
2051 (unsigned long)interface);
2052 INIT_WORK(&interface->service_task, fm10k_service_task);
2053
2054 /* kick off service timer now, even when interface is down */
2055 mod_timer(&interface->service_timer, (HZ * 2) + jiffies);
2056
2057 /* print warning for non-optimal configurations */
2058 fm10k_slot_warn(interface);
2059
2060 /* report MAC address for logging */
2061 dev_info(&pdev->dev, "%pM\n", netdev->dev_addr);
2062
2063 /* enable SR-IOV after registering netdev to enforce PF/VF ordering */
2064 fm10k_iov_configure(pdev, 0);
2065
2066 /* clear the service task disable bit to allow service task to start */
2067 clear_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2068
2069 return 0;
2070
2071 err_register:
2072 fm10k_mbx_free_irq(interface);
2073 err_mbx_interrupt:
2074 fm10k_clear_queueing_scheme(interface);
2075 err_sw_init:
2076 if (interface->sw_addr)
2077 iounmap(interface->sw_addr);
2078 iounmap(interface->uc_addr);
2079 err_ioremap:
2080 free_netdev(netdev);
2081 err_alloc_netdev:
2082 pci_release_mem_regions(pdev);
2083 err_pci_reg:
2084 err_dma:
2085 pci_disable_device(pdev);
2086 return err;
2087 }
2088
2089 /**
2090 * fm10k_remove - Device Removal Routine
2091 * @pdev: PCI device information struct
2092 *
2093 * fm10k_remove is called by the PCI subsystem to alert the driver
2094 * that it should release a PCI device. The could be caused by a
2095 * Hot-Plug event, or because the driver is going to be removed from
2096 * memory.
2097 **/
2098 static void fm10k_remove(struct pci_dev *pdev)
2099 {
2100 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2101 struct net_device *netdev = interface->netdev;
2102
2103 del_timer_sync(&interface->service_timer);
2104
2105 set_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2106 cancel_work_sync(&interface->service_task);
2107
2108 /* free netdev, this may bounce the interrupts due to setup_tc */
2109 if (netdev->reg_state == NETREG_REGISTERED)
2110 unregister_netdev(netdev);
2111
2112 /* release VFs */
2113 fm10k_iov_disable(pdev);
2114
2115 /* disable mailbox interrupt */
2116 fm10k_mbx_free_irq(interface);
2117
2118 /* free interrupts */
2119 fm10k_clear_queueing_scheme(interface);
2120
2121 /* remove any debugfs interfaces */
2122 fm10k_dbg_intfc_exit(interface);
2123
2124 if (interface->sw_addr)
2125 iounmap(interface->sw_addr);
2126 iounmap(interface->uc_addr);
2127
2128 free_netdev(netdev);
2129
2130 pci_release_mem_regions(pdev);
2131
2132 pci_disable_pcie_error_reporting(pdev);
2133
2134 pci_disable_device(pdev);
2135 }
2136
2137 static void fm10k_prepare_suspend(struct fm10k_intfc *interface)
2138 {
2139 /* the watchdog task reads from registers, which might appear like
2140 * a surprise remove if the PCIe device is disabled while we're
2141 * stopped. We stop the watchdog task until after we resume software
2142 * activity.
2143 */
2144 set_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2145 cancel_work_sync(&interface->service_task);
2146
2147 fm10k_prepare_for_reset(interface);
2148 }
2149
2150 static int fm10k_handle_resume(struct fm10k_intfc *interface)
2151 {
2152 struct fm10k_hw *hw = &interface->hw;
2153 int err;
2154
2155 /* reset statistics starting values */
2156 hw->mac.ops.rebind_hw_stats(hw, &interface->stats);
2157
2158 err = fm10k_handle_reset(interface);
2159 if (err)
2160 return err;
2161
2162 /* assume host is not ready, to prevent race with watchdog in case we
2163 * actually don't have connection to the switch
2164 */
2165 interface->host_ready = false;
2166 fm10k_watchdog_host_not_ready(interface);
2167
2168 /* force link to stay down for a second to prevent link flutter */
2169 interface->link_down_event = jiffies + (HZ);
2170 set_bit(__FM10K_LINK_DOWN, &interface->state);
2171
2172 /* clear the service task disable bit to allow service task to start */
2173 clear_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2174 fm10k_service_event_schedule(interface);
2175
2176 return err;
2177 }
2178
2179 #ifdef CONFIG_PM
2180 /**
2181 * fm10k_resume - Restore device to pre-sleep state
2182 * @pdev: PCI device information struct
2183 *
2184 * fm10k_resume is called after the system has powered back up from a sleep
2185 * state and is ready to resume operation. This function is meant to restore
2186 * the device back to its pre-sleep state.
2187 **/
2188 static int fm10k_resume(struct pci_dev *pdev)
2189 {
2190 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2191 struct net_device *netdev = interface->netdev;
2192 struct fm10k_hw *hw = &interface->hw;
2193 u32 err;
2194
2195 pci_set_power_state(pdev, PCI_D0);
2196 pci_restore_state(pdev);
2197
2198 /* pci_restore_state clears dev->state_saved so call
2199 * pci_save_state to restore it.
2200 */
2201 pci_save_state(pdev);
2202
2203 err = pci_enable_device_mem(pdev);
2204 if (err) {
2205 dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
2206 return err;
2207 }
2208 pci_set_master(pdev);
2209
2210 pci_wake_from_d3(pdev, false);
2211
2212 /* refresh hw_addr in case it was dropped */
2213 hw->hw_addr = interface->uc_addr;
2214
2215 err = fm10k_handle_resume(interface);
2216 if (err)
2217 return err;
2218
2219 netif_device_attach(netdev);
2220
2221 return 0;
2222 }
2223
2224 /**
2225 * fm10k_suspend - Prepare the device for a system sleep state
2226 * @pdev: PCI device information struct
2227 *
2228 * fm10k_suspend is meant to shutdown the device prior to the system entering
2229 * a sleep state. The fm10k hardware does not support wake on lan so the
2230 * driver simply needs to shut down the device so it is in a low power state.
2231 **/
2232 static int fm10k_suspend(struct pci_dev *pdev,
2233 pm_message_t __always_unused state)
2234 {
2235 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2236 struct net_device *netdev = interface->netdev;
2237 int err = 0;
2238
2239 netif_device_detach(netdev);
2240
2241 fm10k_prepare_suspend(interface);
2242
2243 err = pci_save_state(pdev);
2244 if (err)
2245 return err;
2246
2247 pci_disable_device(pdev);
2248 pci_wake_from_d3(pdev, false);
2249 pci_set_power_state(pdev, PCI_D3hot);
2250
2251 return 0;
2252 }
2253
2254 #endif /* CONFIG_PM */
2255 /**
2256 * fm10k_io_error_detected - called when PCI error is detected
2257 * @pdev: Pointer to PCI device
2258 * @state: The current pci connection state
2259 *
2260 * This function is called after a PCI bus error affecting
2261 * this device has been detected.
2262 */
2263 static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev,
2264 pci_channel_state_t state)
2265 {
2266 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2267 struct net_device *netdev = interface->netdev;
2268
2269 netif_device_detach(netdev);
2270
2271 if (state == pci_channel_io_perm_failure)
2272 return PCI_ERS_RESULT_DISCONNECT;
2273
2274 fm10k_prepare_suspend(interface);
2275
2276 /* Request a slot reset. */
2277 return PCI_ERS_RESULT_NEED_RESET;
2278 }
2279
2280 /**
2281 * fm10k_io_slot_reset - called after the pci bus has been reset.
2282 * @pdev: Pointer to PCI device
2283 *
2284 * Restart the card from scratch, as if from a cold-boot.
2285 */
2286 static pci_ers_result_t fm10k_io_slot_reset(struct pci_dev *pdev)
2287 {
2288 pci_ers_result_t result;
2289
2290 if (pci_reenable_device(pdev)) {
2291 dev_err(&pdev->dev,
2292 "Cannot re-enable PCI device after reset.\n");
2293 result = PCI_ERS_RESULT_DISCONNECT;
2294 } else {
2295 pci_set_master(pdev);
2296 pci_restore_state(pdev);
2297
2298 /* After second error pci->state_saved is false, this
2299 * resets it so EEH doesn't break.
2300 */
2301 pci_save_state(pdev);
2302
2303 pci_wake_from_d3(pdev, false);
2304
2305 result = PCI_ERS_RESULT_RECOVERED;
2306 }
2307
2308 pci_cleanup_aer_uncorrect_error_status(pdev);
2309
2310 return result;
2311 }
2312
2313 /**
2314 * fm10k_io_resume - called when traffic can start flowing again.
2315 * @pdev: Pointer to PCI device
2316 *
2317 * This callback is called when the error recovery driver tells us that
2318 * its OK to resume normal operation.
2319 */
2320 static void fm10k_io_resume(struct pci_dev *pdev)
2321 {
2322 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2323 struct net_device *netdev = interface->netdev;
2324 int err;
2325
2326 err = fm10k_handle_resume(interface);
2327
2328 if (err)
2329 dev_warn(&pdev->dev,
2330 "fm10k_io_resume failed: %d\n", err);
2331 else
2332 netif_device_attach(netdev);
2333 }
2334
2335 /**
2336 * fm10k_io_reset_notify - called when PCI function is reset
2337 * @pdev: Pointer to PCI device
2338 *
2339 * This callback is called when the PCI function is reset such as from
2340 * /sys/class/net/<enpX>/device/reset or similar. When prepare is true, it
2341 * means we should prepare for a function reset. If prepare is false, it means
2342 * the function reset just occurred.
2343 */
2344 static void fm10k_io_reset_notify(struct pci_dev *pdev, bool prepare)
2345 {
2346 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2347 int err = 0;
2348
2349 if (prepare) {
2350 /* warn incase we have any active VF devices */
2351 if (pci_num_vf(pdev))
2352 dev_warn(&pdev->dev,
2353 "PCIe FLR may cause issues for any active VF devices\n");
2354
2355 fm10k_prepare_suspend(interface);
2356 } else {
2357 err = fm10k_handle_resume(interface);
2358 }
2359
2360 if (err) {
2361 dev_warn(&pdev->dev,
2362 "fm10k_io_reset_notify failed: %d\n", err);
2363 netif_device_detach(interface->netdev);
2364 }
2365 }
2366
2367 static const struct pci_error_handlers fm10k_err_handler = {
2368 .error_detected = fm10k_io_error_detected,
2369 .slot_reset = fm10k_io_slot_reset,
2370 .resume = fm10k_io_resume,
2371 .reset_notify = fm10k_io_reset_notify,
2372 };
2373
2374 static struct pci_driver fm10k_driver = {
2375 .name = fm10k_driver_name,
2376 .id_table = fm10k_pci_tbl,
2377 .probe = fm10k_probe,
2378 .remove = fm10k_remove,
2379 #ifdef CONFIG_PM
2380 .suspend = fm10k_suspend,
2381 .resume = fm10k_resume,
2382 #endif
2383 .sriov_configure = fm10k_iov_configure,
2384 .err_handler = &fm10k_err_handler
2385 };
2386
2387 /**
2388 * fm10k_register_pci_driver - register driver interface
2389 *
2390 * This function is called on module load in order to register the driver.
2391 **/
2392 int fm10k_register_pci_driver(void)
2393 {
2394 return pci_register_driver(&fm10k_driver);
2395 }
2396
2397 /**
2398 * fm10k_unregister_pci_driver - unregister driver interface
2399 *
2400 * This function is called on module unload in order to remove the driver.
2401 **/
2402 void fm10k_unregister_pci_driver(void)
2403 {
2404 pci_unregister_driver(&fm10k_driver);
2405 }
Linux with added FPC-III support