pvrusb2: reduce stack usage pvr2_eeprom_analyze()
[linux/fpc-iii.git] / drivers / net / ethernet / mellanox / mlx4 / catas.c
blob53daa6ca5d83b60f7ad8632694658922921f82f5
1 /*
2 * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
3 * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
5 * This software is available to you under a choice of one of two
6 * licenses. You may choose to be licensed under the terms of the GNU
7 * General Public License (GPL) Version 2, available from the file
8 * COPYING in the main directory of this source tree, or the
9 * OpenIB.org BSD license below:
11 * Redistribution and use in source and binary forms, with or
12 * without modification, are permitted provided that the following
13 * conditions are met:
15 * - Redistributions of source code must retain the above
16 * copyright notice, this list of conditions and the following
17 * disclaimer.
19 * - Redistributions in binary form must reproduce the above
20 * copyright notice, this list of conditions and the following
21 * disclaimer in the documentation and/or other materials
22 * provided with the distribution.
24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31 * SOFTWARE.
34 #include <linux/workqueue.h>
35 #include <linux/module.h>
37 #include "mlx4.h"
39 enum {
40 MLX4_CATAS_POLL_INTERVAL = 5 * HZ,
45 int mlx4_internal_err_reset = 1;
46 module_param_named(internal_err_reset, mlx4_internal_err_reset, int, 0644);
47 MODULE_PARM_DESC(internal_err_reset,
48 "Reset device on internal errors if non-zero (default 1)");
50 static int read_vendor_id(struct mlx4_dev *dev)
52 u16 vendor_id = 0;
53 int ret;
55 ret = pci_read_config_word(dev->persist->pdev, 0, &vendor_id);
56 if (ret) {
57 mlx4_err(dev, "Failed to read vendor ID, ret=%d\n", ret);
58 return ret;
61 if (vendor_id == 0xffff) {
62 mlx4_err(dev, "PCI can't be accessed to read vendor id\n");
63 return -EINVAL;
66 return 0;
69 static int mlx4_reset_master(struct mlx4_dev *dev)
71 int err = 0;
73 if (mlx4_is_master(dev))
74 mlx4_report_internal_err_comm_event(dev);
76 if (!pci_channel_offline(dev->persist->pdev)) {
77 err = read_vendor_id(dev);
78 /* If PCI can't be accessed to read vendor ID we assume that its
79 * link was disabled and chip was already reset.
81 if (err)
82 return 0;
84 err = mlx4_reset(dev);
85 if (err)
86 mlx4_err(dev, "Fail to reset HCA\n");
89 return err;
92 static int mlx4_reset_slave(struct mlx4_dev *dev)
94 #define COM_CHAN_RST_REQ_OFFSET 0x10
95 #define COM_CHAN_RST_ACK_OFFSET 0x08
97 u32 comm_flags;
98 u32 rst_req;
99 u32 rst_ack;
100 unsigned long end;
101 struct mlx4_priv *priv = mlx4_priv(dev);
103 if (pci_channel_offline(dev->persist->pdev))
104 return 0;
106 comm_flags = swab32(readl((__iomem char *)priv->mfunc.comm +
107 MLX4_COMM_CHAN_FLAGS));
108 if (comm_flags == 0xffffffff) {
109 mlx4_err(dev, "VF reset is not needed\n");
110 return 0;
113 if (!(dev->caps.vf_caps & MLX4_VF_CAP_FLAG_RESET)) {
114 mlx4_err(dev, "VF reset is not supported\n");
115 return -EOPNOTSUPP;
118 rst_req = (comm_flags & (u32)(1 << COM_CHAN_RST_REQ_OFFSET)) >>
119 COM_CHAN_RST_REQ_OFFSET;
120 rst_ack = (comm_flags & (u32)(1 << COM_CHAN_RST_ACK_OFFSET)) >>
121 COM_CHAN_RST_ACK_OFFSET;
122 if (rst_req != rst_ack) {
123 mlx4_err(dev, "Communication channel isn't sync, fail to send reset\n");
124 return -EIO;
127 rst_req ^= 1;
128 mlx4_warn(dev, "VF is sending reset request to Firmware\n");
129 comm_flags = rst_req << COM_CHAN_RST_REQ_OFFSET;
130 __raw_writel((__force u32)cpu_to_be32(comm_flags),
131 (__iomem char *)priv->mfunc.comm + MLX4_COMM_CHAN_FLAGS);
132 /* Make sure that our comm channel write doesn't
133 * get mixed in with writes from another CPU.
135 mmiowb();
137 end = msecs_to_jiffies(MLX4_COMM_TIME) + jiffies;
138 while (time_before(jiffies, end)) {
139 comm_flags = swab32(readl((__iomem char *)priv->mfunc.comm +
140 MLX4_COMM_CHAN_FLAGS));
141 rst_ack = (comm_flags & (u32)(1 << COM_CHAN_RST_ACK_OFFSET)) >>
142 COM_CHAN_RST_ACK_OFFSET;
144 /* Reading rst_req again since the communication channel can
145 * be reset at any time by the PF and all its bits will be
146 * set to zero.
148 rst_req = (comm_flags & (u32)(1 << COM_CHAN_RST_REQ_OFFSET)) >>
149 COM_CHAN_RST_REQ_OFFSET;
151 if (rst_ack == rst_req) {
152 mlx4_warn(dev, "VF Reset succeed\n");
153 return 0;
155 cond_resched();
157 mlx4_err(dev, "Fail to send reset over the communication channel\n");
158 return -ETIMEDOUT;
161 int mlx4_comm_internal_err(u32 slave_read)
163 return (u32)COMM_CHAN_EVENT_INTERNAL_ERR ==
164 (slave_read & (u32)COMM_CHAN_EVENT_INTERNAL_ERR) ? 1 : 0;
167 void mlx4_enter_error_state(struct mlx4_dev_persistent *persist)
169 int err;
170 struct mlx4_dev *dev;
172 if (!mlx4_internal_err_reset)
173 return;
175 mutex_lock(&persist->device_state_mutex);
176 if (persist->state & MLX4_DEVICE_STATE_INTERNAL_ERROR)
177 goto out;
179 dev = persist->dev;
180 mlx4_err(dev, "device is going to be reset\n");
181 if (mlx4_is_slave(dev))
182 err = mlx4_reset_slave(dev);
183 else
184 err = mlx4_reset_master(dev);
186 if (!err) {
187 mlx4_err(dev, "device was reset successfully\n");
188 } else {
189 /* EEH could have disabled the PCI channel during reset. That's
190 * recoverable and the PCI error flow will handle it.
192 if (!pci_channel_offline(dev->persist->pdev))
193 BUG_ON(1);
195 dev->persist->state |= MLX4_DEVICE_STATE_INTERNAL_ERROR;
196 mutex_unlock(&persist->device_state_mutex);
198 /* At that step HW was already reset, now notify clients */
199 mlx4_dispatch_event(dev, MLX4_DEV_EVENT_CATASTROPHIC_ERROR, 0);
200 mlx4_cmd_wake_completions(dev);
201 return;
203 out:
204 mutex_unlock(&persist->device_state_mutex);
207 static void mlx4_handle_error_state(struct mlx4_dev_persistent *persist)
209 int err = 0;
211 mlx4_enter_error_state(persist);
212 mutex_lock(&persist->interface_state_mutex);
213 if (persist->interface_state & MLX4_INTERFACE_STATE_UP &&
214 !(persist->interface_state & MLX4_INTERFACE_STATE_DELETION)) {
215 err = mlx4_restart_one(persist->pdev);
216 mlx4_info(persist->dev, "mlx4_restart_one was ended, ret=%d\n",
217 err);
219 mutex_unlock(&persist->interface_state_mutex);
222 static void dump_err_buf(struct mlx4_dev *dev)
224 struct mlx4_priv *priv = mlx4_priv(dev);
226 int i;
228 mlx4_err(dev, "Internal error detected:\n");
229 for (i = 0; i < priv->fw.catas_size; ++i)
230 mlx4_err(dev, " buf[%02x]: %08x\n",
231 i, swab32(readl(priv->catas_err.map + i)));
234 static void poll_catas(unsigned long dev_ptr)
236 struct mlx4_dev *dev = (struct mlx4_dev *) dev_ptr;
237 struct mlx4_priv *priv = mlx4_priv(dev);
238 u32 slave_read;
240 if (mlx4_is_slave(dev)) {
241 slave_read = swab32(readl(&priv->mfunc.comm->slave_read));
242 if (mlx4_comm_internal_err(slave_read)) {
243 mlx4_warn(dev, "Internal error detected on the communication channel\n");
244 goto internal_err;
246 } else if (readl(priv->catas_err.map)) {
247 dump_err_buf(dev);
248 goto internal_err;
251 if (dev->persist->state & MLX4_DEVICE_STATE_INTERNAL_ERROR) {
252 mlx4_warn(dev, "Internal error mark was detected on device\n");
253 goto internal_err;
256 mod_timer(&priv->catas_err.timer,
257 round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL));
258 return;
260 internal_err:
261 if (mlx4_internal_err_reset)
262 queue_work(dev->persist->catas_wq, &dev->persist->catas_work);
265 static void catas_reset(struct work_struct *work)
267 struct mlx4_dev_persistent *persist =
268 container_of(work, struct mlx4_dev_persistent,
269 catas_work);
271 mlx4_handle_error_state(persist);
274 void mlx4_start_catas_poll(struct mlx4_dev *dev)
276 struct mlx4_priv *priv = mlx4_priv(dev);
277 phys_addr_t addr;
279 INIT_LIST_HEAD(&priv->catas_err.list);
280 init_timer(&priv->catas_err.timer);
281 priv->catas_err.map = NULL;
283 if (!mlx4_is_slave(dev)) {
284 addr = pci_resource_start(dev->persist->pdev,
285 priv->fw.catas_bar) +
286 priv->fw.catas_offset;
288 priv->catas_err.map = ioremap(addr, priv->fw.catas_size * 4);
289 if (!priv->catas_err.map) {
290 mlx4_warn(dev, "Failed to map internal error buffer at 0x%llx\n",
291 (unsigned long long)addr);
292 return;
296 priv->catas_err.timer.data = (unsigned long) dev;
297 priv->catas_err.timer.function = poll_catas;
298 priv->catas_err.timer.expires =
299 round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL);
300 add_timer(&priv->catas_err.timer);
303 void mlx4_stop_catas_poll(struct mlx4_dev *dev)
305 struct mlx4_priv *priv = mlx4_priv(dev);
307 del_timer_sync(&priv->catas_err.timer);
309 if (priv->catas_err.map) {
310 iounmap(priv->catas_err.map);
311 priv->catas_err.map = NULL;
314 if (dev->persist->interface_state & MLX4_INTERFACE_STATE_DELETION)
315 flush_workqueue(dev->persist->catas_wq);
318 int mlx4_catas_init(struct mlx4_dev *dev)
320 INIT_WORK(&dev->persist->catas_work, catas_reset);
321 dev->persist->catas_wq = create_singlethread_workqueue("mlx4_health");
322 if (!dev->persist->catas_wq)
323 return -ENOMEM;
325 return 0;
328 void mlx4_catas_end(struct mlx4_dev *dev)
330 if (dev->persist->catas_wq) {
331 destroy_workqueue(dev->persist->catas_wq);
332 dev->persist->catas_wq = NULL;