Merge tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind...
[linux/fpc-iii.git] / drivers / mfd / intel_msic.c
blob25d486c543cbc11271381e2bb510967c05f5c533
1 /*
2 * Driver for Intel MSIC
4 * Copyright (C) 2011, Intel Corporation
5 * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/err.h>
13 #include <linux/gpio.h>
14 #include <linux/io.h>
15 #include <linux/module.h>
16 #include <linux/mfd/core.h>
17 #include <linux/mfd/intel_msic.h>
18 #include <linux/platform_device.h>
19 #include <linux/slab.h>
21 #include <asm/intel_scu_ipc.h>
23 #define MSIC_VENDOR(id) ((id >> 6) & 3)
24 #define MSIC_VERSION(id) (id & 0x3f)
25 #define MSIC_MAJOR(id) ('A' + ((id >> 3) & 7))
26 #define MSIC_MINOR(id) (id & 7)
29 * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
30 * Since IRQ block starts from address 0x002 we need to subtract that from
31 * the actual IRQ status register address.
33 #define MSIC_IRQ_STATUS(x) (INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
34 #define MSIC_IRQ_STATUS_ACCDET MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)
37 * The SCU hardware has limitation of 16 bytes per read/write buffer on
38 * Medfield.
40 #define SCU_IPC_RWBUF_LIMIT 16
42 /**
43 * struct intel_msic - an MSIC MFD instance
44 * @pdev: pointer to the platform device
45 * @vendor: vendor ID
46 * @version: chip version
47 * @irq_base: base address of the mapped MSIC SRAM interrupt tree
49 struct intel_msic {
50 struct platform_device *pdev;
51 unsigned vendor;
52 unsigned version;
53 void __iomem *irq_base;
56 static struct resource msic_touch_resources[] = {
58 .flags = IORESOURCE_IRQ,
62 static struct resource msic_adc_resources[] = {
64 .flags = IORESOURCE_IRQ,
68 static struct resource msic_battery_resources[] = {
70 .flags = IORESOURCE_IRQ,
74 static struct resource msic_gpio_resources[] = {
76 .flags = IORESOURCE_IRQ,
80 static struct resource msic_audio_resources[] = {
82 .name = "IRQ",
83 .flags = IORESOURCE_IRQ,
86 * We will pass IRQ_BASE to the driver now but this can be removed
87 * when/if the driver starts to use intel_msic_irq_read().
90 .name = "IRQ_BASE",
91 .flags = IORESOURCE_MEM,
92 .start = MSIC_IRQ_STATUS_ACCDET,
93 .end = MSIC_IRQ_STATUS_ACCDET,
97 static struct resource msic_hdmi_resources[] = {
99 .flags = IORESOURCE_IRQ,
103 static struct resource msic_thermal_resources[] = {
105 .flags = IORESOURCE_IRQ,
109 static struct resource msic_power_btn_resources[] = {
111 .flags = IORESOURCE_IRQ,
115 static struct resource msic_ocd_resources[] = {
117 .flags = IORESOURCE_IRQ,
122 * Devices that are part of the MSIC and are available via firmware
123 * populated SFI DEVS table.
125 static struct mfd_cell msic_devs[] = {
126 [INTEL_MSIC_BLOCK_TOUCH] = {
127 .name = "msic_touch",
128 .num_resources = ARRAY_SIZE(msic_touch_resources),
129 .resources = msic_touch_resources,
131 [INTEL_MSIC_BLOCK_ADC] = {
132 .name = "msic_adc",
133 .num_resources = ARRAY_SIZE(msic_adc_resources),
134 .resources = msic_adc_resources,
136 [INTEL_MSIC_BLOCK_BATTERY] = {
137 .name = "msic_battery",
138 .num_resources = ARRAY_SIZE(msic_battery_resources),
139 .resources = msic_battery_resources,
141 [INTEL_MSIC_BLOCK_GPIO] = {
142 .name = "msic_gpio",
143 .num_resources = ARRAY_SIZE(msic_gpio_resources),
144 .resources = msic_gpio_resources,
146 [INTEL_MSIC_BLOCK_AUDIO] = {
147 .name = "msic_audio",
148 .num_resources = ARRAY_SIZE(msic_audio_resources),
149 .resources = msic_audio_resources,
151 [INTEL_MSIC_BLOCK_HDMI] = {
152 .name = "msic_hdmi",
153 .num_resources = ARRAY_SIZE(msic_hdmi_resources),
154 .resources = msic_hdmi_resources,
156 [INTEL_MSIC_BLOCK_THERMAL] = {
157 .name = "msic_thermal",
158 .num_resources = ARRAY_SIZE(msic_thermal_resources),
159 .resources = msic_thermal_resources,
161 [INTEL_MSIC_BLOCK_POWER_BTN] = {
162 .name = "msic_power_btn",
163 .num_resources = ARRAY_SIZE(msic_power_btn_resources),
164 .resources = msic_power_btn_resources,
166 [INTEL_MSIC_BLOCK_OCD] = {
167 .name = "msic_ocd",
168 .num_resources = ARRAY_SIZE(msic_ocd_resources),
169 .resources = msic_ocd_resources,
174 * Other MSIC related devices which are not directly available via SFI DEVS
175 * table. These can be pseudo devices, regulators etc. which are needed for
176 * different purposes.
178 * These devices appear only after the MSIC driver itself is initialized so
179 * we can guarantee that the SCU IPC interface is ready.
181 static const struct mfd_cell msic_other_devs[] = {
182 /* Audio codec in the MSIC */
184 .id = -1,
185 .name = "sn95031",
190 * intel_msic_reg_read - read a single MSIC register
191 * @reg: register to read
192 * @val: register value is placed here
194 * Read a single register from MSIC. Returns %0 on success and negative
195 * errno in case of failure.
197 * Function may sleep.
199 int intel_msic_reg_read(unsigned short reg, u8 *val)
201 return intel_scu_ipc_ioread8(reg, val);
203 EXPORT_SYMBOL_GPL(intel_msic_reg_read);
206 * intel_msic_reg_write - write a single MSIC register
207 * @reg: register to write
208 * @val: value to write to that register
210 * Write a single MSIC register. Returns 0 on success and negative
211 * errno in case of failure.
213 * Function may sleep.
215 int intel_msic_reg_write(unsigned short reg, u8 val)
217 return intel_scu_ipc_iowrite8(reg, val);
219 EXPORT_SYMBOL_GPL(intel_msic_reg_write);
222 * intel_msic_reg_update - update a single MSIC register
223 * @reg: register to update
224 * @val: value to write to the register
225 * @mask: specifies which of the bits are updated (%0 = don't update,
226 * %1 = update)
228 * Perform an update to a register @reg. @mask is used to specify which
229 * bits are updated. Returns %0 in case of success and negative errno in
230 * case of failure.
232 * Function may sleep.
234 int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
236 return intel_scu_ipc_update_register(reg, val, mask);
238 EXPORT_SYMBOL_GPL(intel_msic_reg_update);
241 * intel_msic_bulk_read - read an array of registers
242 * @reg: array of register addresses to read
243 * @buf: array where the read values are placed
244 * @count: number of registers to read
246 * Function reads @count registers from the MSIC using addresses passed in
247 * @reg. Read values are placed in @buf. Reads are performed atomically
248 * wrt. MSIC.
250 * Returns %0 in case of success and negative errno in case of failure.
252 * Function may sleep.
254 int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
256 if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
257 return -EINVAL;
259 return intel_scu_ipc_readv(reg, buf, count);
261 EXPORT_SYMBOL_GPL(intel_msic_bulk_read);
264 * intel_msic_bulk_write - write an array of values to the MSIC registers
265 * @reg: array of registers to write
266 * @buf: values to write to each register
267 * @count: number of registers to write
269 * Function writes @count registers in @buf to MSIC. Writes are performed
270 * atomically wrt MSIC. Returns %0 in case of success and negative errno in
271 * case of failure.
273 * Function may sleep.
275 int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
277 if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
278 return -EINVAL;
280 return intel_scu_ipc_writev(reg, buf, count);
282 EXPORT_SYMBOL_GPL(intel_msic_bulk_write);
285 * intel_msic_irq_read - read a register from an MSIC interrupt tree
286 * @msic: MSIC instance
287 * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
288 * %INTEL_MSIC_RESETIRQ2)
289 * @val: value of the register is placed here
291 * This function can be used by an MSIC subdevice interrupt handler to read
292 * a register value from the MSIC interrupt tree. In this way subdevice
293 * drivers don't have to map in the interrupt tree themselves but can just
294 * call this function instead.
296 * Function doesn't sleep and is callable from interrupt context.
298 * Returns %-EINVAL if @reg is outside of the allowed register region.
300 int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
302 if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
303 return -EINVAL;
305 *val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
306 return 0;
308 EXPORT_SYMBOL_GPL(intel_msic_irq_read);
310 static int intel_msic_init_devices(struct intel_msic *msic)
312 struct platform_device *pdev = msic->pdev;
313 struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
314 int ret, i;
316 if (pdata->gpio) {
317 struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];
319 cell->platform_data = pdata->gpio;
320 cell->pdata_size = sizeof(*pdata->gpio);
323 if (pdata->ocd) {
324 unsigned gpio = pdata->ocd->gpio;
326 ret = devm_gpio_request_one(&pdev->dev, gpio,
327 GPIOF_IN, "ocd_gpio");
328 if (ret) {
329 dev_err(&pdev->dev, "failed to register OCD GPIO\n");
330 return ret;
333 ret = gpio_to_irq(gpio);
334 if (ret < 0) {
335 dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
336 return ret;
339 /* Update the IRQ number for the OCD */
340 pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
343 for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
344 if (!pdata->irq[i])
345 continue;
347 ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
348 pdata->irq[i], NULL);
349 if (ret)
350 goto fail;
353 ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
354 ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
355 if (ret)
356 goto fail;
358 return 0;
360 fail:
361 mfd_remove_devices(&pdev->dev);
363 return ret;
366 static void intel_msic_remove_devices(struct intel_msic *msic)
368 struct platform_device *pdev = msic->pdev;
370 mfd_remove_devices(&pdev->dev);
373 static int intel_msic_probe(struct platform_device *pdev)
375 struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
376 struct intel_msic *msic;
377 struct resource *res;
378 u8 id0, id1;
379 int ret;
381 if (!pdata) {
382 dev_err(&pdev->dev, "no platform data passed\n");
383 return -EINVAL;
386 /* First validate that we have an MSIC in place */
387 ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
388 if (ret) {
389 dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
390 return -ENXIO;
393 ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
394 if (ret) {
395 dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
396 return -ENXIO;
399 if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
400 dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
401 return -ENXIO;
404 msic = devm_kzalloc(&pdev->dev, sizeof(*msic), GFP_KERNEL);
405 if (!msic)
406 return -ENOMEM;
408 msic->vendor = MSIC_VENDOR(id0);
409 msic->version = MSIC_VERSION(id0);
410 msic->pdev = pdev;
413 * Map in the MSIC interrupt tree area in SRAM. This is exposed to
414 * the clients via intel_msic_irq_read().
416 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
417 msic->irq_base = devm_ioremap_resource(&pdev->dev, res);
418 if (IS_ERR(msic->irq_base))
419 return PTR_ERR(msic->irq_base);
421 platform_set_drvdata(pdev, msic);
423 ret = intel_msic_init_devices(msic);
424 if (ret) {
425 dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
426 return ret;
429 dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
430 MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
431 msic->vendor);
433 return 0;
436 static int intel_msic_remove(struct platform_device *pdev)
438 struct intel_msic *msic = platform_get_drvdata(pdev);
440 intel_msic_remove_devices(msic);
442 return 0;
445 static struct platform_driver intel_msic_driver = {
446 .probe = intel_msic_probe,
447 .remove = intel_msic_remove,
448 .driver = {
449 .name = "intel_msic",
453 module_platform_driver(intel_msic_driver);
455 MODULE_DESCRIPTION("Driver for Intel MSIC");
456 MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
457 MODULE_LICENSE("GPL");