arch/mips/alchemy/board-gpr.c

   1 /*
   2  * GPR board platform device registration (Au1550)
   3  *
   4  * Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  19  */
  20
  21 #include <linux/delay.h>
  22 #include <linux/init.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/kernel.h>
  25 #include <linux/platform_device.h>
  26 #include <linux/pm.h>
  27 #include <linux/mtd/partitions.h>
  28 #include <linux/mtd/physmap.h>
  29 #include <linux/leds.h>
  30 #include <linux/gpio.h>
  31 #include <linux/i2c.h>
  32 #include <linux/i2c-gpio.h>
  33 #include <asm/bootinfo.h>
  34 #include <asm/idle.h>
  35 #include <asm/reboot.h>
  36 #include <asm/mach-au1x00/au1000.h>
  37 #include <asm/mach-au1x00/gpio-au1000.h>
  38 #include <prom.h>
  39
  40 const char *get_system_type(void)
  41 {
  42         return "GPR";
  43 }
  44
  45 void __init prom_init(void)
  46 {
  47         unsigned char *memsize_str;
  48         unsigned long memsize;
  49
  50         prom_argc = fw_arg0;
  51         prom_argv = (char **)fw_arg1;
  52         prom_envp = (char **)fw_arg2;
  53
  54         prom_init_cmdline();
  55
  56         memsize_str = prom_getenv("memsize");
  57         if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
  58                 memsize = 0x04000000;
  59         add_memory_region(0, memsize, BOOT_MEM_RAM);
  60 }
  61
  62 void prom_putchar(unsigned char c)
  63 {
  64         alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
  65 }
  66
  67 static void gpr_reset(char *c)
  68 {
  69         /* switch System-LED to orange (red# and green# on) */
  70         alchemy_gpio_direction_output(4, 0);
  71         alchemy_gpio_direction_output(5, 0);
  72
  73         /* trigger watchdog to reset board in 200ms */
  74         printk(KERN_EMERG "Triggering watchdog soft reset...\n");
  75         raw_local_irq_disable();
  76         alchemy_gpio_direction_output(1, 0);
  77         udelay(1);
  78         alchemy_gpio_set_value(1, 1);
  79         while (1)
  80                 cpu_wait();
  81 }
  82
  83 static void gpr_power_off(void)
  84 {
  85         while (1)
  86                 cpu_wait();
  87 }
  88
  89 void __init board_setup(void)
  90 {
  91         printk(KERN_INFO "Trapeze ITS GPR board\n");
  92
  93         pm_power_off = gpr_power_off;
  94         _machine_halt = gpr_power_off;
  95         _machine_restart = gpr_reset;
  96
  97         /* Enable UART1/3 */
  98         alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
  99         alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
 100
 101         /* Take away Reset of UMTS-card */
 102         alchemy_gpio_direction_output(215, 1);
 103 }
 104
 105 /*
 106  * Watchdog
 107  */
 108 static struct resource gpr_wdt_resource[] = {
 109         [0] = {
 110                 .start  = 1,
 111                 .end    = 1,
 112                 .name   = "gpr-adm6320-wdt",
 113                 .flags  = IORESOURCE_IRQ,
 114         }
 115 };
 116
 117 static struct platform_device gpr_wdt_device = {
 118         .name = "adm6320-wdt",
 119         .id = 0,
 120         .num_resources = ARRAY_SIZE(gpr_wdt_resource),
 121         .resource = gpr_wdt_resource,
 122 };
 123
 124 /*
 125  * FLASH
 126  *
 127  * 0x00000000-0x00200000 : "kernel"
 128  * 0x00200000-0x00a00000 : "rootfs"
 129  * 0x01d00000-0x01f00000 : "config"
 130  * 0x01c00000-0x01d00000 : "yamon"
 131  * 0x01d00000-0x01d40000 : "yamon env vars"
 132  * 0x00000000-0x00a00000 : "kernel+rootfs"
 133  */
 134 static struct mtd_partition gpr_mtd_partitions[] = {
 135         {
 136                 .name   = "kernel",
 137                 .size   = 0x00200000,
 138                 .offset = 0,
 139         },
 140         {
 141                 .name   = "rootfs",
 142                 .size   = 0x00800000,
 143                 .offset = MTDPART_OFS_APPEND,
 144                 .mask_flags = MTD_WRITEABLE,
 145         },
 146         {
 147                 .name   = "config",
 148                 .size   = 0x00200000,
 149                 .offset = 0x01d00000,
 150         },
 151         {
 152                 .name   = "yamon",
 153                 .size   = 0x00100000,
 154                 .offset = 0x01c00000,
 155         },
 156         {
 157                 .name   = "yamon env vars",
 158                 .size   = 0x00040000,
 159                 .offset = MTDPART_OFS_APPEND,
 160         },
 161         {
 162                 .name   = "kernel+rootfs",
 163                 .size   = 0x00a00000,
 164                 .offset = 0,
 165         },
 166 };
 167
 168 static struct physmap_flash_data gpr_flash_data = {
 169         .width          = 4,
 170         .nr_parts       = ARRAY_SIZE(gpr_mtd_partitions),
 171         .parts          = gpr_mtd_partitions,
 172 };
 173
 174 static struct resource gpr_mtd_resource = {
 175         .start  = 0x1e000000,
 176         .end    = 0x1fffffff,
 177         .flags  = IORESOURCE_MEM,
 178 };
 179
 180 static struct platform_device gpr_mtd_device = {
 181         .name           = "physmap-flash",
 182         .dev            = {
 183                 .platform_data  = &gpr_flash_data,
 184         },
 185         .num_resources  = 1,
 186         .resource       = &gpr_mtd_resource,
 187 };
 188
 189 /*
 190  * LEDs
 191  */
 192 static struct gpio_led gpr_gpio_leds[] = {
 193         {       /* green */
 194                 .name                   = "gpr:green",
 195                 .gpio                   = 4,
 196                 .active_low             = 1,
 197         },
 198         {       /* red */
 199                 .name                   = "gpr:red",
 200                 .gpio                   = 5,
 201                 .active_low             = 1,
 202         }
 203 };
 204
 205 static struct gpio_led_platform_data gpr_led_data = {
 206         .num_leds = ARRAY_SIZE(gpr_gpio_leds),
 207         .leds = gpr_gpio_leds,
 208 };
 209
 210 static struct platform_device gpr_led_devices = {
 211         .name = "leds-gpio",
 212         .id = -1,
 213         .dev = {
 214                 .platform_data = &gpr_led_data,
 215         }
 216 };
 217
 218 /*
 219  * I2C
 220  */
 221 static struct i2c_gpio_platform_data gpr_i2c_data = {
 222         .sda_pin                = 209,
 223         .sda_is_open_drain      = 1,
 224         .scl_pin                = 210,
 225         .scl_is_open_drain      = 1,
 226         .udelay                 = 2,            /* ~100 kHz */
 227         .timeout                = HZ,
 228 };
 229
 230 static struct platform_device gpr_i2c_device = {
 231         .name                   = "i2c-gpio",
 232         .id                     = -1,
 233         .dev.platform_data      = &gpr_i2c_data,
 234 };
 235
 236 static struct i2c_board_info gpr_i2c_info[] __initdata = {
 237         {
 238                 I2C_BOARD_INFO("lm83", 0x18),
 239                 .type = "lm83"
 240         }
 241 };
 242
 243
 244
 245 static struct resource alchemy_pci_host_res[] = {
 246         [0] = {
 247                 .start  = AU1500_PCI_PHYS_ADDR,
 248                 .end    = AU1500_PCI_PHYS_ADDR + 0xfff,
 249                 .flags  = IORESOURCE_MEM,
 250         },
 251 };
 252
 253 static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 254 {
 255         if ((slot == 0) && (pin == 1))
 256                 return AU1550_PCI_INTA;
 257         else if ((slot == 0) && (pin == 2))
 258                 return AU1550_PCI_INTB;
 259
 260         return 0xff;
 261 }
 262
 263 static struct alchemy_pci_platdata gpr_pci_pd = {
 264         .board_map_irq  = gpr_map_pci_irq,
 265         .pci_cfg_set    = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
 266                           PCI_CONFIG_CH |
 267 #if defined(__MIPSEB__)
 268                           PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
 269 #else
 270                           0,
 271 #endif
 272 };
 273
 274 static struct platform_device gpr_pci_host_dev = {
 275         .dev.platform_data = &gpr_pci_pd,
 276         .name           = "alchemy-pci",
 277         .id             = 0,
 278         .num_resources  = ARRAY_SIZE(alchemy_pci_host_res),
 279         .resource       = alchemy_pci_host_res,
 280 };
 281
 282 static struct platform_device *gpr_devices[] __initdata = {
 283         &gpr_wdt_device,
 284         &gpr_mtd_device,
 285         &gpr_i2c_device,
 286         &gpr_led_devices,
 287 };
 288
 289 static int __init gpr_pci_init(void)
 290 {
 291         return platform_device_register(&gpr_pci_host_dev);
 292 }
 293 /* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
 294 arch_initcall(gpr_pci_init);
 295
 296
 297 static int __init gpr_dev_init(void)
 298 {
 299         i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
 300
 301         return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices));
 302 }
 303 device_initcall(gpr_dev_init);