rtl8187: Fix kernel oops when device is removed when LEDS enabled
[linux/fpc-iii.git] / arch / x86 / include / asm / olpc.h
blob834a30295fabbb75740826a39c76e7bfbbe2fe37
1 /* OLPC machine specific definitions */
3 #ifndef _ASM_X86_OLPC_H
4 #define _ASM_X86_OLPC_H
6 #include <asm/geode.h>
8 struct olpc_platform_t {
9 int flags;
10 uint32_t boardrev;
11 int ecver;
14 #define OLPC_F_PRESENT 0x01
15 #define OLPC_F_DCON 0x02
16 #define OLPC_F_VSA 0x04
18 #ifdef CONFIG_OLPC
20 extern struct olpc_platform_t olpc_platform_info;
23 * OLPC board IDs contain the major build number within the mask 0x0ff0,
24 * and the minor build number withing 0x000f. Pre-builds have a minor
25 * number less than 8, and normal builds start at 8. For example, 0x0B10
26 * is a PreB1, and 0x0C18 is a C1.
29 static inline uint32_t olpc_board(uint8_t id)
31 return (id << 4) | 0x8;
34 static inline uint32_t olpc_board_pre(uint8_t id)
36 return id << 4;
39 static inline int machine_is_olpc(void)
41 return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
45 * The DCON is OLPC's Display Controller. It has a number of unique
46 * features that we might want to take advantage of..
48 static inline int olpc_has_dcon(void)
50 return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
54 * The VSA is software from AMD that typical Geode bioses will include.
55 * It is used to emulate the PCI bus, VGA, etc. OLPC's Open Firmware does
56 * not include the VSA; instead, PCI is emulated by the kernel.
58 * The VSA is described further in arch/x86/pci/olpc.c.
60 static inline int olpc_has_vsa(void)
62 return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
66 * The "Mass Production" version of OLPC's XO is identified as being model
67 * C2. During the prototype phase, the following models (in chronological
68 * order) were created: A1, B1, B2, B3, B4, C1. The A1 through B2 models
69 * were based on Geode GX CPUs, and models after that were based upon
70 * Geode LX CPUs. There were also some hand-assembled models floating
71 * around, referred to as PreB1, PreB2, etc.
73 static inline int olpc_board_at_least(uint32_t rev)
75 return olpc_platform_info.boardrev >= rev;
78 #else
80 static inline int machine_is_olpc(void)
82 return 0;
85 static inline int olpc_has_dcon(void)
87 return 0;
90 static inline int olpc_has_vsa(void)
92 return 0;
95 #endif
97 /* EC related functions */
99 extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
100 unsigned char *outbuf, size_t outlen);
102 extern int olpc_ec_mask_set(uint8_t bits);
103 extern int olpc_ec_mask_unset(uint8_t bits);
105 /* EC commands */
107 #define EC_FIRMWARE_REV 0x08
109 /* SCI source values */
111 #define EC_SCI_SRC_EMPTY 0x00
112 #define EC_SCI_SRC_GAME 0x01
113 #define EC_SCI_SRC_BATTERY 0x02
114 #define EC_SCI_SRC_BATSOC 0x04
115 #define EC_SCI_SRC_BATERR 0x08
116 #define EC_SCI_SRC_EBOOK 0x10
117 #define EC_SCI_SRC_WLAN 0x20
118 #define EC_SCI_SRC_ACPWR 0x40
119 #define EC_SCI_SRC_ALL 0x7F
121 /* GPIO assignments */
123 #define OLPC_GPIO_MIC_AC geode_gpio(1)
124 #define OLPC_GPIO_DCON_IRQ geode_gpio(7)
125 #define OLPC_GPIO_THRM_ALRM geode_gpio(10)
126 #define OLPC_GPIO_SMB_CLK geode_gpio(14)
127 #define OLPC_GPIO_SMB_DATA geode_gpio(15)
128 #define OLPC_GPIO_WORKAUX geode_gpio(24)
129 #define OLPC_GPIO_LID geode_gpio(26)
130 #define OLPC_GPIO_ECSCI geode_gpio(27)
132 #endif /* _ASM_X86_OLPC_H */